[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: V8 '165 harness modifications
From: Brent Obermiller <ober_b@sssnet.com>
> I eliminated the pressure switch from my 7747 setup, the relay stays
> closed as long as there's a tach signal (i.e. engine is running; small
> safety considerations.) However, the wires through the pressure switch
> are a heavier gauge wire.
Oops - now I stepped in it ...
I guess I have a conceptual error - I was under the impression that the FP
relay dropped out after 10 seconds or so, but is that only on a no-start
condition or am I totally baked?