[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
re:speedo-heads up disply was: speedometer-transparent first surface reflector needed
- To: gmecm@diy-efi.org
- Subject: re:speedo-heads up disply was: speedometer-transparent first surface reflector needed
- From: "Daniel N" <gmecu@hotmail.com>
- Date: Sun, 27 Feb 2000 17:19:57 EST
Can you send me the schmatic of that tach adaptor 8cyl -> 6
Daniel
>From: cwagner@info2000.net
>Reply-To: gmecm@diy-efi.org
>To: gmecm@diy-efi.org
>Subject: re:speedo-heads up disply was: speedometer-transparent first
>surface reflector needed
>Date: Sat, 26 Feb 2000 13:16:59 -0700
>
>As for the reflective surface, that is the least of my concerns.
>What I am looking for is for a two or three digit electonic
>speedometer circuit/schematic that I can adapt for use as a HUD.
>If any of the electronic people out there have any thing that can
>help, I could use as much as possible. By the way, earlier I was
>asking about a tach adapter to convert a v8 signal to a 6 cyl signal,
>etc., I have designed one if anyone wants a copy of the shematic.
>Works good.
>
>
>On 26 Feb 00, at 12:35, Swayze wrote:
>
> > I don't remember what the topic was but a few months ago one of the
>www.'s for a discrete electronics mfc. showed the heads up display they
>were soon to release. mypersonal thoughts on the subject are to install a
>vertical piece of UV- Plexiglas between the dash and the windshield .
>tinted
>maybe for daylight use. one of the plastics companies probably has
>reflection/refraction specs for the various varieties of Plexiglas. they
>may even have one that sticks on like window tint film.
> > sounds like surf's up
> > byE
> > Mike
> > Swayze
> > mswayze@truswood.com
> > kswayze@bellsouth.net
> >
> >
> >
> >
>
>
>