Re: Programming Voltage

[Ludis Langens <ludis@cruzers.com>]

> Jeff Flanary wrote:
> 
> I have a bunch of old eproms taken out of GM ECM's.  I was wondering
> if anyone could tell me what the programming voltages are and what
> type of eprom they are.  Some are 24 pin, some 28 pin.

The 24 pins are likely some version of the 2732, though they could also
be TMS2532's.  The 28 pins can be 27128, 27256, or 27512.  For the
programming voltage, start with the lowest voltage first - unless there
is a manufacturer number on the chip which you can look up.

-- 
Ludis Langens                               ludis (at) cruzers (dot) com
Mac, Fiero, & engine controller goodies:  http://www.cruzers.com/~ludis/