[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Cold Start programming and programming for 24lb injectors
Guys,
I will be using TunerCat to burn my first PROM. The car is a '90 IROC 5.7
which means it has the 1227730 ECM and a 27C256 PROM. My main problem with
my current chip (TPIS Level V PROM) is that the cold start programming
absolutely sucks. They are dumping way too much fuel into the engine when I
first start the car. This is probably because my cam pulls less vacuum then
they thought. I am running a CC Xtreme 218/224 cam with 0.528"/0.537" lift.
It is ground on a 112LSA. The WOT programming in the Level V PROM is great.
I have run a best of 12.5 @ 108mph. But, as mentioned, the cold starting
sucks. I was thinking that I have to change the "Open Loop AFR vs. MAP"
and/or the "Open Loop AFR vs. Temp.". Am I on the right track here? Also,
if I switch to 24lb injectors (currently using LPE bluprinted stock
22lbers), do I ONLY have to change the "Injector flow rating" ? Or, do I
have to alter anything else?
Thanks,
Tim Siford