[Gmecm] Re: Fuel Economy

[ndarrell at telusplanet.net (Darrell)]

you forgot solar panels... lol
While i'm at it, i might as well add an electric motor and some 
batteries and make it a hybrid!

On 16 Sep 2005 at 19:24, David Allen wrote:

>  Lets see- next modification.... Add the dual 120 amp CS-144 alternators...
> to power the 2.5KW inverter.... to simultaneously run the 3 laptop PC's,
> EPROM burner, UV eraser, soldering iron, WBO2 controller, satellite intenet
> hookup (for technical support) and cell phone charger (for even more serious
> technical support). :-)
> 
> David
> 
> 
> 
> ----- Original Message ----- 
> From: gary
> To: gmecm@diy-efi.org
> Sent: Friday, September 16, 2005 5:29 PM
> Subject: Re: [Gmecm] Re: Fuel Economy
> 
> 
> > I was responding to Darrell....
> >> No No No!  You can't run a wide band in place of a narrow band..
> 
> Mark, I understood to whom you were responding to.  I merely
> corrected your previous statement.  I'm confident with a lot of
> WB software, your statement will hold true however.
> 
> > Interesting idea about using a WBO2 sensor, has anyone actually tried
> > this?  I mean replacing a stock NB with a WB on a stock computer?
> 
> :confused:  Well, sure.  Why else would I post it?  :)  On numerous
> vehicles/OEM PCMs, both foreign and domestic.  To avoid CEL on
> some (domestic) vehicles it is necessary to simulate O2 heater
> circuit with resisters however.
> 
> > That in combination with changing the voltage threshold may allow
> > you to set the AFR to a slightly leaner mixture overall.
> 
>  Yes!  That is what precisely has been done, richer or leaner.  Details
> can be found (with search feature) on forum section of link provided.
> 
> GAS
> 
> 
> ----- Original Message ----- 
> From: Mark Romans
> To: gmecm@diy-efi.org
> Sent: Friday, September 16, 2005 6:55 PM
> Subject: Re: [Gmecm] Re: Fuel Economy
> 
> I was responding to Darrell <ndarrell@telusplanet.net> when he said...
> 
> "Cowen: (and all)
> 
> Well, you are right, second times the charm.  Thank you for
> responding anyway, and getting a little action going on the thread.
> A lot of this information will be useful, thanks to all who posted on
> the topic.  Some of it went way over my head, but I'm here to learn.
> 
> Interesting idea about using a WBO2 sensor, has anyone actually tried
> this?  I mean replacing a stock NB with a WB on a stock computer?
> That in combination with changing the voltage threshold may allow you
> to set the AFR to a slightly leaner mixture overall."
> 
> Mark
> 
> 
> 
> _______________________________________________
> Gmecm mailing list
> Gmecm@diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/gmecm
> 
> _______________________________________________
> Gmecm mailing list
> Gmecm@diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/gmecm