[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Need help with spark map's in 747.
First check out:
http://efi332.eng.ohio-state.edu/gmecm/projects/747_ignition/
Kevin Reynolds wrote:
> I'm playing with the Tunercat software and a few bins from the board trying
> to learn about the basic logic the ecm uses for managing different
> functions.
>
> There are 2 spark tables listed, Main and added.
> Is the adder used when in WOT mode and added to the main table for that
> mode, or just there to help the transition like PE fuel is used as an accel
> pump?
>
Not sure what they mean by added, but it could be the PE table.
>
> Does the main table comprise all the functions of what would in a mechanical
> distributor be "mechanical advance"& "vacuum advance" ?
>
Yes.
>
> Is there any other spark tables that would be used in high vacuum(cruise)
> conditions that would be more equal to the effects of a vacuum canister on a
> regular mechanical GM setup, or is it all in that one main table?
>
There is a hiway added spark function, but it seems to be disabled
in most bins. Could try it out.
>
> Thanks,
> Kevin R
>
BobR.