Mail Thread Index
- Re: Snap On Scan Tool,
Programmer
- <Possible follow-ups>
- Re: Snap On Scan Tool,
Programmer
- Snap On Scan Tool,
Andrew K. Mattei
- Re: Snap On Scan Tool,
Shannen Durphey
- Re: Snap On Scan Tool,
Ross Myers
- Re: Snap On Scan Tool,
Bruce Plecan
- Re: Snap On Scan Tool,
Shannen Durphey
- Re: Snap On Scan Tool,
Shannen Durphey
- Re: Snap On Scan Tool,
Thomas McCabe
- Re: Snap On Scan Tool,
Walter Sherwin
- Re: Snap On Scan Tool,
Frederic Breitwieser
- Re: Snap On Scan Tool,
Shannen Durphey
- Re: Snap On Scan Tool,
Thomas McCabe
- Re: Snap On Scan Tool,
Dave Williams
- Re: Snap On Scan Tool,
Programmer
- RE: Snap On Scan Tool,
Marc Piccioni
- Re: Snap On Scan Tool,
Programmer
- Re: injectors,
Programmer
- RE: Lambda sensors - Where, Why and how Much ?,
Malcolm Robb, LC 0112G
- <Possible follow-ups>
- Lambda sensors - Where, Why and how Much ?,
Malcolm Robb, LC 0112G
- Re: Lambda sensors - Where, Why and how Much ?,
Squash
- RE: Lambda sensors - Where, Why and how Much ?,
Malcolm Robb, LC 0112G
- RE: Lambda sensors - Where, Why and how Much ?,
KasaRyan
- Re: Lambda sensors - Where, Why and how Much ?,
Edward J. Malkiewicz
- Re: Lambda sensors - Where, Why and how Much ?,
Bruce Plecan
- Re: Lambda sensors - Where, Why and how Much ?,
Bruce Plecan
- Re: Lambda sensors - Where, Why and how Much ?,
Squash
- Re: Lambda sensors - Where, Why and how Much ?,
Len Sabatine
- Re: Lambda sensors - Where, Why and how Much ?,
Squash
- Re: Lambda sensors - Where, Why and how Much ?,
Bruce Plecan
- Re: Lambda sensors - Where, Why and how Much ?,
Bruce Plecan
- Re: Lambda sensors - Where, Why and how Much ?,
Squash
- RE: Lambda sensors - Where, Why and how Much ?,
Eric Bryant
- Re: Lambda sensors - Where, Why and how Much ?,
Len Sabatine
- Re: Lambda sensors - Where, Why and how Much ?,
Len Sabatine
- RE: Lambda sensors - Where, Why and how Much ?,
Len Sabatine
- FW: Lambda sensors - Where, Why and how Much ?,
Paul Murphy
- Re: Lambda sensors - Where, Why and how Much ?,
Garfield Willis
- Re: Lambda sensors - Where, Why and how Much ?,
Bruce Plecan
- RE: Freighting an engine.,
Marc Piccioni
- <Possible follow-ups>
- Freighting an engine.,
TK
- Re: Freighting an engine.,
Qeskimeaux
- Re: Freighting an engine.,
TK
- Re: Freighting an engine.,
TK
- Re: Freighting an engine.,
TK
- RE: Freighting an engine.,
Carl Summers
- Re: Freighting an engine.,
Shannen Durphey
- Re: Freighting an engine.,
gene l. clifford
- Re: Freighting an engine.,
Dave Zug
- Re: Freighting an engine.,
TK
- Re: Freighting an engine.,
Clive Apps Techno-Logicals 416 510 0020
- Re: Freighting an engine.,
Clive Apps Techno-Logicals 416 510 0020
- RE: Rev Limiter,
Marc Piccioni
- injectors --- > liquidation,
Marc Piccioni
- mail delivery,
Marc Piccioni
- RE: Debugger board for P4 ECMs,
Marc Piccioni
- <Possible follow-ups>
- Debugger board for P4 ECMs,
Ludis Langens
- Re: Debugger board for P4 ECMs,
steve ravet
- RE: Debugger board for P4 ECMs,
Bartz, Jamison
- Re: Debugger board for P4 ECMs,
Peter Fenske
- Re: Debugger board for P4 ECMs,
Richard Wakeling
- Re: Debugger board for P4 ECMs,
Steve Ciciora
- RE:debugger board for P4 ECMs,
Mike Swayze
- RE: Debugger board for P4 ECMs,
Matt Tomlins
- Re: Debugger board for P4 ECMs,
nacelp
- Re: Debugger board for P4 ECMs,
Ludis Langens
- Re: Debugger board for P4 ECMs,
Mike Turner/ENGR/HQ/KEMET/US
- Re: Debugger board for P4 ECMs,
Swayze
- Re: Debugger board for P4 ECMs,
Swayze
- Re: Debugger board for P4 ECMs,
steve ravet
- Re: Debugger board for P4 ECMs,
Walter Sherwin
- Re: Debugger board for P4 ECMs,
Ludis Langens
- 48T group wheel buy status ???,
Marc Piccioni
- RE: Non efi, ecm, CCC (Really OLD ECM!),
Marc Piccioni
- ebay TPI system,
Marc Piccioni
- RE: EFI POWWOW,
Marc Piccioni
- 30# injectors,
Marc Piccioni
- RE: ZIP Cleaning,
Marc Piccioni
- vortec distributor pn 1104051,
Marc Piccioni
- TPI injectors for sale,
Marc Piccioni
- RE: '84 G-body with carbureted CCC,
Marc Piccioni
- <Possible follow-ups>
- RE: '84 G-body with carbureted CCC,
Marc Piccioni
- RE: '84 G-body with carbureted CCC,
Marc Piccioni
- '84 G-body with carbureted CCC,
gerhardr
- Re: '84 G-body with carbureted CCC,
Bruce Plecan
- Re: '84 G-body with carbureted CCC,
Chipsbyal
- RE: '84 G-body with carbureted CCC,
gerhardr
- Re: '84 G-body with carbureted CCC,
gerhardr
- Re: '84 G-body with carbureted CCC,
Brent Obermiller
- Re: '84 G-body with carbureted CCC,
Ludis Langens
- Re: '84 G-body with carbureted CCC,
gerhardr
- RE: Automotive Circuit Protection - Part 1,
Marc Piccioni
- <Possible follow-ups>
- Re: Automotive Circuit Protection - Part 1,
Bruce Plecan
- RE: Automotive Circuit Protection - Part 1,
Mike Rolica
- RE: Automotive Circuit Protection - Part 1,
Roger Heflin
- RE: Automotive Circuit Protection - Part 1,
Eric Aos
- Automotive Circuit Protection - Part 1,
Garfield Willis
- RE: Automotive Circuit Protection - Part 1,
Mike Rolica
- RE: Automotive Circuit Protection - Part 1,
Mike Rolica
- Re: Automotive Circuit Protection - Part 1,
Garfield Willis
- Re: Automotive Circuit Protection - Part 1,
Garfield Willis
- Re: Automotive Circuit Protection - Part 1,
Garfield Willis
- Re: Automotive Circuit Protection - Part 1,
Shannen Durphey
- RE: Q-Jet sec size,
Marc Piccioni
- <Possible follow-ups>
- Q-Jet sec size,
rr
- Re: Q-Jet sec size,
Bruce Plecan
- Re: Q-Jet sec size,
bcroe
- Re: Q-Jet sec size,
Greg Hermann
- Re: Q-Jet sec size,
Shannen Durphey
- Re: Q-Jet sec size,
Greg Hermann
- Re: Q-Jet sec size,
rr
- Re: Q-Jet sec size,
Bruce Plecan
- Re: Q-Jet sec size,
rr
- Re: Q-Jet sec size,
Shannen Durphey
- Re: Q-Jet sec size,
rr
- Re: Q-Jet sec size,
Laderjg
- non - efi AFR heads for sale,
Marc Piccioni
- RE: Bins needed,
Marc Piccioni
- open loop non-cat bins,
Marc Piccioni
- RE: 4L60e transmission question,
Marc Piccioni
- efi bin's cross reference,
Marc Piccioni
- Was Chip carrier now sockets,
Marc Piccioni
- <Possible follow-ups>
- Re: Was Chip carrier now sockets,
Ludis Langens
- Re: Was Chip carrier now sockets,
steve ravet
- Re: Was Chip carrier now sockets,
Edward J. Malkiewicz
- Re: Was Chip carrier now sockets,
Ludis Langens
- Re: Was Chip carrier now sockets,
Steven Ciciora
- Re: Was Chip carrier now sockets,
Bruce Plecan
- Re: Was Chip carrier now sockets,
steve ravet
- Re: Was Chip carrier now sockets,
Bruce Plecan
- Re: Was Chip carrier now sockets,
TK
- Re: Was Chip carrier now sockets,
David Cooley
- RE: Was Chip carrier now sockets,
Guenther,Max [ASCO/PA]
- spare ecm's '7730 & '7748,
Marc Piccioni
- RE: Injector Duty cycle calculations,
Marc Piccioni
- <Possible follow-ups>
- Injector Duty cycle calculations,
timsiford
- Re: Injector Duty cycle calculations,
timsiford
- Re: Injector Duty cycle calculations,
Bruce Plecan
- Re: Injector Duty cycle calculations,
timsiford
- Re: Injector Duty cycle calculations,
timsiford
- Re: Injector Duty cycle calculations,
Roger Heflin
- Re: Injector Duty cycle calculations,
Romans, Mark
- Re: Injector Duty cycle calculations,
timsiford
- Re: Injector Duty cycle calculations,
timsiford
- Re: Injector Duty cycle calculations,
timsiford
- Re: Injector Duty cycle calculations,
Scott Knight
- Re: Injector Duty cycle calculations,
Bruce Plecan
- Re: Injector Duty cycle calculations,
Scot Sealander
- Re: Injector Duty cycle calculations,
Bruce Plecan
- Re: Injector Duty cycle calculations,
Scot Sealander
- Re: Injector Duty cycle calculations,
Roger Heflin
- Re: Injector Duty cycle calculations,
Roger Heflin
- Re: Injector Duty cycle calculations,
ECMnut
- Re: Injector Duty cycle calculations,
Bruce Plecan
- RE: Injector Duty cycle calculations,
Mike Rolica
- RE: Injector Duty cycle calculations,
Mike Rolica
- Re: Injector Duty cycle calculations,
Bruce Plecan
- RE: Injector Duty cycle calculations,
Mike Rolica
- Re: Injector Duty cycle calculations,
Bruce Plecan
- RE: Injector Duty cycle calculations,
Mike Rolica
- Re: Injector Duty cycle calculations,
Bruce Plecan
- RE: Injector Duty cycle calculations,
Mike Rolica
- Re: Injector Duty cycle calculations,
Bruce Plecan
- RE: Injector Duty cycle calculations,
Mike Rolica
- Re: Injector Duty cycle calculations,
Bruce Plecan
- Re: Injector Duty cycle calculations,
Jeff M
- Re: Injector Duty cycle calculations,
Scott Knight
- Re: Injector Duty cycle calculations,
timsiford
- big inch SBC EFI intake mainfold,
Marc Piccioni
- <Possible follow-ups>
- RE: big inch SBC EFI intake mainfold,
Marc Piccioni
- Re: big inch SBC EFI intake mainfold,
Bruce Plecan
- Re: big inch SBC EFI intake mainfold,
ECMnut
- Re: big inch SBC EFI intake mainfold,
gene l. clifford
- Re: big inch SBC EFI intake mainfold,
ECMnut
- Re: big inch SBC EFI intake mainfold,
Bruce Plecan
- Re: big inch SBC EFI intake mainfold,
Garfield Willis
- RE: big inch SBC EFI intake mainfold,
Mike Rolica
- RE: big inch SBC EFI intake mainfold,
Mike Rolica
- Re: big inch SBC EFI intake mainfold,
Tom Sharpe
- RE: big inch SBC EFI intake mainfold,
the Fredericks
- Re: big inch SBC EFI intake mainfold,
Bruce Plecan
- Re: big inch SBC EFI intake mainfold,
Bruce Plecan
- RE: big inch SBC EFI intake mainfold,
Marteney, Steven J.
- RE: big inch SBC EFI intake mainfold,
Len Sabatine
- RE: big inch SBC EFI intake mainfold,
Squash
- Re: big inch SBC EFI intake mainfold,
WEG1192
- Re: big inch SBC EFI intake mainfold,
Phil Rickard
- Re: big inch SBC EFI intake mainfold,
Bruce Plecan
- Re: big inch SBC EFI intake mainfold,
Phil Rickard
- RE: big inch SBC EFI intake mainfold,
Mike Rolica
- Re: big inch SBC EFI intake mainfold,
Bruce Plecan
- Re: big inch SBC EFI intake mainfold,
Scott Knight
- Re: big inch SBC EFI intake mainfold,
Bruce Plecan
- Re: big inch SBC EFI intake mainfold,
Scott Knight
- Re: big inch SBC EFI intake mainfold,
Bruce Plecan
- Re: big inch SBC EFI intake mainfold,
Scott Knight
- Re: big inch SBC EFI intake mainfold,
Bruce Plecan
- RE: big inch SBC EFI intake mainfold,
Marteney, Steven J.
- Re: 16176424 PCM pinouts,
Matt Tomlins
- Hey, what happened to the lights?,
TK
- Subject: [admin] List services (automated monthly post),
jsg
- Re: Prom ID with 16198262 ECM,
Bruce Plecan
- Att. Bruce here is the Bin File,
James Wilson
- Re: DIS Module component ID,
Peter Gargano
- EGR and MAP,
Dave Williams
- Re: knock knock goes the jeep....,
Ross Myers
- GM Marine 10-pin DLC?,
Andrew K. Mattei
- Re: 1227165.. apyu bcc HELP!,
Bruce Plecan
- 730/727,
Bja1078
- <Possible follow-ups>
- Re: 730/727,
Ward
- Re: 730/727,
TK
- Re: 730/727,
Dave Zug
- Re: 730/727,
cwagner
- Re: 730/727,
Bruce Plecan
- Re: 730/727,
cwagner
- Re: 730/727,
Ludis Langens
- Re: 730/727,
TK
- Re: 730/727,
Bja1078
- Re: 730/727,
Bja1078
- Re: 730/727,
Bruce Plecan
- Re: 730/727,
Ludis Langens
- Re: 730/727,
James Wilson
- Re: 730/727,
Dave Williams
- Re: 730/727,
Squash
- Re: 730/727,
Pat Ford
- Re: 730/727,
Dave Williams
- Re: 730/727,
Pat Ford
- Re: 730/727,
Bruce Plecan
- Re: 730/727,
Dave Williams
- Re: 730/727,
Dave Williams
- Re: 730/727,
Bruce Plecan
- RE: 730/727,
the Fredericks
- Re: 730/727,
Shannen Durphey
- Re: 730/727,
Dave Williams
- Re: 730/727,
Dave Williams
- Re: 730/727,
ECMnut
- Re: 730/727,
ECMnut
- Re: 730/727,
Dave Zug
- Re: 730/727,
Bruce Plecan
- Re: 730/727,
Dave Williams
- Re: 730/727,
Dave Williams
- Re: 730/727,
Bruce Plecan
- Re: 730/727,
cwagner
- Re: 730/727,
Bruce Plecan
- Re: 730/727,
ECMnut
- Re: 730/727,
cwagner
- Re: 730/727,
Bruce Plecan
- Is someone here disassembling the 3.4L DOHC chip?,
bcurrey
- Re: Few questions with regard to programming 101-Big Picture,
Shannen Durphey
- Re[2]: 7730 memory locations,
Geoff Richards
- DIS ?.,
Bruce Plecan
- V6 / 730 ALDL datastream,
Bob Valentine
- Nissan Pulsar Exa 195 ECU Pinouts,
Andrew Wakeling
- Re: Information for converting old carburated systems,
Shannen Durphey
- W32/NewApt virus,
hmacneal
- Wanted M68HC11EVB- Evaluation Board,
PHXSYS
- sample documented 68hc11 for single point injectio,
Ch-complat
- Odp: GM Marine 10-pin DLC?,
Marek Skrzypiec
- plenum volume,
Kevin Reynolds
- 89 MAF Volt to freq conversion,
Thomas Matthews
- <Possible follow-ups>
- Re: 89 MAF Volt to freq conversion,
DC Smith
- RE: 89 MAF Volt to freq conversion,
Mike Rolica
- Re: 89 MAF Volt to freq conversion,
Thomas Matthews
- Re: 89 MAF Volt to freq conversion,
Mark Romans
- Re: 89 MAF Volt to freq conversion,
Thomas Matthews
- RE: 89 MAF Volt to freq conversion,
Marteney, Steven J.
- Re: 89 MAF Volt to freq conversion,
DC Smith
- Re: 89 MAF Volt to freq conversion,
Bruce Plecan
- Re: 89 MAF Volt to freq conversion,
SPECTRO COATING CORP.
- Re: 89 MAF Volt to freq conversion,
Bruce Plecan
- RE: 89 MAF Volt to freq conversion,
Carl Summers
- RE: 89 MAF Volt to freq conversion,
Marteney, Steven J.
- Re: 89 MAF Volt to freq conversion,
Bruce Plecan
- RE: 89 MAF Volt to freq conversion,
the Fredericks
- re: 7747 "shaking" the vechile?!,
Mika Helander
- 94/95 GM PCM + M6 tranny question,
Dave Hempstead
- update on knock knock goes the jeep....,
John S. Gwynne
- Mike bumping into things,
Pat Ford
- Need help on 87 2.8v6,
Mike Rolica
- How to read E6 eeprom while programming ?,
PHXSYS
- Spk747_3.ecu,
Jon Fedock
- New to the group..,
Ken Kelly
- Mapedit? - http://www.uq.net.au/~zzchack/smapedit.html,
Christian Hack
- Airbag DIag, was: re: Mike bumping into things,
Dave Zug
- P4 and on Memory Mapping,
Ross Myers
- Re: CarBytes v2,
Daniel Ciobota
- EST,
Barry Tisdale
- Re: .ecu,
cwagner
- Re: 165 to late MAF,
Thomas Matthews
- <Possible follow-ups>
- Re: 165 to late MAF,
PCMdoc
- Re: 165 to late MAF,
Thomas Matthews
- Re: 165 to late MAF,
PCMdoc
- RE: 165 to late MAF,
Ken Kelly
- Re: 165 to late MAF,
Bruce Plecan
- RE: 165 to late MAF,
Ken Kelly
- Re: 165 to late MAF,
Bruce Plecan
- Re: 165 to late MAF,
PCMdoc
- Re: 165 to late MAF,
PCMdoc
- Re: 165 to late MAF,
PCMdoc
- RE: 165 to late MAF,
Marteney, Steven J.
- Re: 165 to late MAF,
Bruce Plecan
- Re: 165 to late MAF,
Bja1078
- sitepage(previously 89 MAF Volt...),
Mike Swayze
- Archives,
Geoff Richards
- <Possible follow-ups>
- Re: Archives,
Bruce Plecan
- Re: Archives,
digi
- Re: Archives,
Geoff Richards
- Re: Archives,
Geoff Richards
- Re: Archives,
Bruce Plecan
- Re: Archives,
Bruce Plecan
- Re: Archives,
Eric Clark
- Re: Archives,
digi
- Re: Archives,
Shannen Durphey
- Re: Archives,
Scott Knight
- Re: Archives,
Bruce Plecan
- Re: Archives,
Dave Williams
- Re: Archives,
Bruce Plecan
- Re: Archives,
Greg Hermann
- Re: Archives,
Bruce Plecan
- Re: Archives,
Bruce Plecan
- Re: Archives,
Scott Knight
- Re: Archives,
Scott Knight
- Re: Archives,
Geoff Richards
- RE: Archives,
Mike Rolica
- Re: Archives,
Dave Williams
- RE: Archives,
Mike Rolica
- Re: Archives,
Dave Williams
- Re: Archives,
ECMnut
- Re: Archives,
Scott Knight
- Re: Archives,
Dave Williams
- Re: Archives,
Bruce Plecan
- Re: Archives,
ECMnut
- Re: Archives,
Geoff Richards
- archives,
Robert W. Hughes
- Archives,
Programmer
- Re: Archives,
nacelp
- Re: Archives,
Programmer
- Re: Archives,
nacelp
- Archives,
Keith
- ARCHIVES,
Mike Rolica
- Re: ARCHIVES,
Garfield Willis
- Re: .ecu/prom masks, some variants,
Bruce Plecan
- More stunning news from CSH, HQ,
Bruce Plecan
- 730 DIS,
Dave Williams
- <Possible follow-ups>
- Re: 730 DIS,
Bruce Plecan
- RE: 730 DIS,
Mike Rolica
- Re: 730 DIS,
Marc Randolph
- Re: 730 DIS,
Douglas Ratcliffe
- Re: 730 DIS,
Mike Swayze
- Re: 730 DIS,
Douglas Ratcliffe
- Re: 730 DIS,
Douglas Ratcliffe
- Re: 730 DIS,
Bruce Plecan
- Re: 730 DIS,
Bruce Plecan
- Re: 730 DIS,
Mike Swayze
- Re: 730 DIS,
Bruce Plecan
- Re: 730 DIS,
Bruce Plecan
- Re: 730 DIS,
Qeskimeaux
- Re: 730 DIS,
Dave Williams
- Re: 730 DIS,
Bruce Plecan
- Re: 730 DIS,
John T. Martin
- Re: 730 DIS,
TK
- Re: 730 DIS,
Dave Williams
- Re: 730 DIS,
Shannen Durphey
- Re: 730 DIS,
Bob Valentine
- Re: 730 DIS,
Bruce Plecan
- Re: 730 DIS,
Ludis Langens
- New GM web site,
Ross Myers
- X-fire,
Ken Kelly
- more DIS questions,
Mike Swayze
- <Possible follow-ups>
- Re: more DIS questions,
Shannen Durphey
- Re: more DIS questions,
Bob Valentine
- Re: more DIS questions,
TK
- Re: more DIS questions,
Shannen Durphey
- Re: more DIS questions,
Bruce Plecan
- Re: more DIS questions,
Bruce Plecan
- Re: more DIS questions,
Greg Hermann
- Re: more DIS questions,
Bruce Plecan
- Re: more DIS questions,
Greg Hermann
- Re: more DIS questions,
Shannen Durphey
- Re: more DIS questions,
Greg Hermann
- Re: more DIS questions,
Ward
- Re: more DIS questions,
Bruce Plecan
- x-fire pinouts,
Kevin Reynolds
- Datasheet for MC33199,
Andrew Mattei
- Opel Barina Pin-outs,
Richard Wakeling
- VSS output,
Shawn R. Lin
- Odp: Datasheet for MC33199,
Marek Skrzypiec
- 96 LT1,
gene l. clifford
- Timing Jump on 165/TPI System,
Craig Moates
- <Possible follow-ups>
- Re: Timing Jump on 165/TPI System,
Bruce Plecan
- Re: Timing Jump on 165/TPI System,
John T. Martin
- Re: Timing Jump on 165/TPI System,
Qeskimeaux
- Re: Timing Jump on 165/TPI System,
Bruce Plecan
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Shannen Durphey
- Re: Timing Jump on 165/TPI System,
Bruce Plecan
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Bruce Plecan
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Bruce Plecan
- RE: Timing Jump on 165/TPI System,
Mike Rolica
- RE: Timing Jump on 165/TPI System,
Mike Rolica
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Bruce Plecan
- RE: Timing Jump on 165/TPI System,
Mike Rolica
- Re: Timing Jump on 165/TPI System,
Bruce Plecan
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Bruce Plecan
- Re: Timing Jump on 165/TPI System,
Mark Romans
- DIS Tach signal,
Shawn R. Lin
- Re: L -plates,
Bruce Plecan
- 4 Cyl 730,
Bruce Plecan
- Emulating... the pros,
Shannen Durphey
- IAC Orifice,
Mike Swayze
- 92 LT1 chip and computer,
Carl Summers
- LT1 manifold question (sort of NOT ECM related),
Marteney, Steven J.
- LT1 manifold adaptation (was question),
SPECTRO COATING CORP.
- Crank Angle Sensors,
Rich Vandervoort
- dead simple recap,
Dave Williams
- VSS on 730,
Dave Williams
- prom emulator circuit--PCAD,
Mike Swayze
- Ken & Shannon re:Crossfire to 7747 pinout,
Kevin Reynolds
- 68HC11 Disassembler...,
Donald Whisnant
- another Xfire to 7747 wiring question.,
Kevin Reynolds
- Odp: OBDII cable source,
Marek Skrzypiec
- again:eprom emulator circuits-pcad,
Swayze
- Dual injector select on crossfire injection.,
Kevin Reynolds
- Re: MC6803U4 info?,
Ludis Langens
- ECM Bench kelp needed,
Bruce Plecan
- Hi and just joined this group,
Team ZR1
- 7747 AC connection.,
Kevin Reynolds
- Introduction,
Sam Stratton
- Memcals,
Geoff Richards
- <Possible follow-ups>
- Re: Memcals,
Bruce Plecan
- Re: Memcals,
JTesta1966
- Re: Memcals,
Swayze
- Re: Memcals,
Bruce Plecan
- Re: Memcals,
Geoff Richards
- Re: Memcals,
steve ravet
- Re: Memcals,
Bruce Plecan
- Re: Memcals,
Bruce Plecan
- Re: Memcals,
Dave Zug
- Re: Memcals,
Swayze
- Re: Memcals,
Swayze
- Re: Memcals,
Andrew K. Mattei
- Re: Memcals,
Bruce Plecan
- Re: Memcals,
Dave Zug
- Re: Memcals,
Shannen Durphey
- Re: Memcals,
Dave Zug
- Re: Memcals,
Andrew K. Mattei
- Re: Memcals,
Shannen Durphey
- Re: Memcals,
Ludis Langens
- Re: Memcals,
Swayze
- Re: Memcals,
Swayze
- Re: Memcals,
Ludis Langens
- Re: Memcals,
Swayze
- Re: Memcals,
Pat Ford
- Re: Memcals,
Swayze
- Re: Memcals,
Walter Sherwin
- Re: Memcals,
Swayze
- Re: Memcals,
Dave Williams
- Re: Memcals,
Dave Williams
- Re: Memcals,
Bruce Plecan
- Re: Memcals,
Bruce Plecan
- Re: Memcals,
Swayze
- Re: re:MEMCALs,
Swayze
- CR Util,
Dave Zug.
- What model ECM is this ?,
Team ZR1
- <Possible follow-ups>
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Mark Romans
- Re: What model ECM is this ?,
Shannen Durphey
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Shannen Durphey
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Ludis Langens
- Re: What model ECM is this ?,
Scot Sealander
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Greg Hermann
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Mark Romans
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Andrew K. Mattei
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Shannen Durphey
- Re: What model ECM is this ?,
Shannen Durphey
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Mark Romans
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Scott Knight
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Mark Romans
- Re: What model ECM is this ?,
Mark Romans
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Shannen Durphey
- Re: What model ECM is this ?,
Chipsbyal
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Daniel Ciobota
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Team ZR1
- 1227165 89 and Burst knock,
Bruce Plecan
- Re: starting point L-plates,
Bruce Plecan
- Re;Re: What model ECM is this ?,
Swayze
- Gummy Chryslers,
Programmer
- <Possible follow-ups>
- Re: Gummy Chryslers,
Scot Sealander
- Re: Gummy Chryslers,
Swayze
- Re: Gummy Chryslers,
Swayze
- Re: Gummy Chryslers,
Shannen Durphey
- Re: Gummy Chryslers,
Programmer
- Re: Gummy Chryslers,
Programmer
- RE: Gummy Chryslers,
Ken Kelly
- Re: Gummy Chryslers,
Shannen Durphey
- Re: Gummy Chryslers,
Jason Weir
- Re: Gummy Chryslers,
Greg Hermann
- Re: Gummy Chryslers,
Dave Zug
- Re: Gummy Chryslers,
Thomas Matthews
- Re: Gummy Chryslers,
Thomas Matthews
- Re: Gummy Chryslers,
Swayze
- Re: Gummy Chryslers,
Programmer
- Re: Gummy Chryslers,
Swayze
- Re: Gummy Chryslers,
Programmer
- Re: Gummy Chryslers,
Programmer
- Clues needed,
Bruce Plecan
- BBC ACFB?,
Bruce Plecan
- OFF SUBJECT re: WHAY ECM IS THIS,
Swayze
- I'm new...test,
ronald . j . selberg
- ECM data logging w/new laptop,
James P Hunt
- High Flow MAF revisited - (Porsche 928 voltage MAF),
Davis
- <Possible follow-ups>
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Thomas Matthews
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Dave Zug
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Bruce Plecan
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Thomas Matthews
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Mark Romans
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Bruce Plecan
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
alexpeper
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
David Cooley
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
alexpeper
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Swayze
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Dave Zug
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Dave Zug
- [no subject],
Paul Blackmore
- Re: GMECM Digest V2 #20,
Paul Blackmore
- bin needed,
Shannen Durphey
- Bin recieved...,
Shannen Durphey
- 730 .ecu file,
James P Hunt
- <Possible follow-ups>
- Re: 730 .ecu file,
Bruce Plecan
- Re: 730 .ecu file,
James P Hunt
- Re: 730 .ecu file,
James P Hunt
- Re: 730 .ecu file,
Bruce Plecan
- Re: 730 .ecu file,
Shannen Durphey
- Re: 730 .ecu file,
Bruce Plecan
- Re: 730 .ecu file,
TK
- Re: 730 .ecu file,
Robert W. Hughes
- Re: 730 .ecu file,
TK
- Re: 730 .ecu file,
James P Hunt
- Re: 730 .ecu file,
James P Hunt
- Re: 730 .ecu file,
Bruce Plecan
- Re: 730 .ecu file,
James P Hunt
- Re: 730 .ecu file,
Bruce Plecan
- .bin file needed..,
Mike Wesley
- Re: Fw: 747 programing,
Bruce Plecan
- Spark Reference Angle for 8 pin HEI module,
Stuart Bunning
- Red Alert, Bin needed,
Bruce Plecan
- Syncing crossfire injection,
Kevin Reynolds
- Re: CarBytes V2 now on GM-ECM ftp site,
Daniel Ciobota
- MAF conversion revisited,
Swayze
- Re: Software request,
Swayze
- CarBytes V2_All.zip now on GM-ECM ftp site (nm),
John LeBlanc
- '730 ecu,
Swayze
- <Possible follow-ups>
- Re: '730 ecu,
Bruce Plecan
- Re: '730 ecu,
Programmer
- Re: '730 ecu,
Programmer
- Re: '730 ecu,
Swayze
- Re: '730 ecu,
Ludis Langens
- Re: '730 ecu,
Swayze
- Re: '730 ecu,
Ludis Langens
- Re: '730 ecu,
Swayze
- Re: '730 ecu,
Programmer
- Re: '730 ecu,
Programmer
- LT5 Info.., and 1228331 stuff in general.,
Bruce Plecan
- <Possible follow-ups>
- Re: LT5 Info.., and 1228331 stuff in general.,
Marc Randolph
- Re: LT5 Info.., and 1228331 stuff in general.,
Daniel Ciobota
- Re: LT5 Info.., and 1228331 stuff in general.,
Bruce Plecan
- Re: LT5 Info.., and 1228331 stuff in general.,
Bruce Plecan
- Re: LT5 Info.., and 1228331 stuff in general.,
Shannen Durphey
- Re: LT5 Info.., and 1228331 stuff in general.,
Marc Randolph
- Re: LT5 Info.., and 1228331 stuff in general.,
Ken Kelly
- Re: LT5 Info.., and 1228331 stuff in general.,
Marc Randolph
- Re: LT5 Info.., and 1228331 stuff in general.,
Team ZR1
- Re: LT5 Info.., and 1228331 stuff in general.,
Swayze
- Re: LT5 Info.., and 1228331 stuff in general.,
Team ZR1
- Re: LT5 Info.., and 1228331 stuff in general.,
Mark Romans
- Re: LT5 Info.., and 1228331 stuff in general.,
Team ZR1
- Re: LT5 Info.., and 1228331 stuff in general.,
Swayze
- Re: LT5 Info.., and 1228331 stuff in general.,
Bruce Plecan
- Re: LT5 Info.., and 1228331 stuff in general.,
Bruce Plecan
- Re: LT5 Info.., and 1228331 stuff in general.,
Squash
- RE: LT5 Info.., and 1228331 stuff in general.,
Randy Lyon
- Re: LT5 Info.., and 1228331 stuff in general.,
Swayze
- Re: LT5 Info.., and 1228331 stuff in general.,
Swayze
- Re: LT5 Info.., and 1228331 stuff in general.,
Squash
- Re: LT5 Info.., and 1228331 stuff in general.,
Team ZR1
- Re: LT5 Info.., and 1228331 stuff in general.,
Ken Kelly
- Re: LT5 Info.., and 1228331 stuff in general.,
Tom Sharpe
- Re: LT5 Info.., and 1228331 stuff in general.,
TK
- Re: LT5 Info.., and 1228331 stuff in general.,
Bruce Plecan
- RE: LT5 Info.., and 1228331 stuff in general.,
Mark M. Pikas
- Re: LT5 Info.., and 1228331 stuff in general.,
TK
- Re: LT5 Info.., and 1228331 stuff in general.,
ECMnut
- Re: LT5 Info.., and 1228331 stuff in general.,
Shannen Durphey
- Re: LT5 Info.., and 1228331 stuff in general.,
TK
- Re: LT5 Info.., and 1228331 stuff in general.,
Bruce Plecan
- Re: LT5 Info.., and 1228331 stuff in general.,
Squash
- Re: LT5 Info.., and 1228331 stuff in general.,
Tom Sharpe
- Just a little follow up to LT5 posting,
Bruce Plecan
- Scantool for '93 4.3L?,
Jared Tschetter
- Vette serial data and scan tool communications,
Shannen Durphey
- Re: Uploading Stuff To FTP Incoming,
Shannen Durphey
- VSS question,
Andrew Choset
- Got Diacom to work on Snakeskinner,
Team ZR1
- Hex clue,
Team ZR1
- Re: 1228331 (16157364?),
Dave Williams
- <Possible follow-ups>
- 1228331 (16157364?),
Mike Swayze
- Re: 1228331 (16157364?),
Superior Chevrolet
- Re: 1228331 (16157364?),
gene l. clifford
- Re: 1228331 (16157364?),
Swayze
- Re: 1228331 (16157364?),
nacelp
- Re: 1228331 (16157364?),
Shannen Durphey
- Re: 1228331 (16157364?),
gene l. clifford
- Re: 1228331 (16157364?),
Shannen Durphey
- Re: 1228331 (16157364?),
Peter D. Hipson
- Re: 1228331 (16157364?),
Marc Randolph
- Re: 1228331 (16157364?),
superchevy
- Re: 1228331 (16157364?),
superchevy
- Re: 1228331 (16157364?),
nacelp
- Re: 1228331 (16157364?),
Shannen Durphey
- Re: 1228331 (16157364?),
Robert Eickhorst
- RE: 1228331 (16157364?),
the Fredericks
- Re: 1228331 (16157364?),
C and T
- RE: 1228331 (16157364?),
Webmaster
- RE: 1228331 (16157364?),
Carl Summers
- RE: 1228331 (16157364?),
Webmaster
- Re: 1228331 (16157364?),
ECMnut
- Re: 1228331 (16157364?),
superchevy
- Re: 1228331 (16157364?),
Tyler Townsley
- Re: 1228331 (16157364?),
SPECTRO COATING CORP.
- Re: 1228331 (16157364?),
Jeff Kopp
- Re: 1228331 (16157364?),
Ross Myers
- Re: 1228331 (16157364?),
superchevy
- Prom burning,
JN
- '7429, 2.8tbi v6,
Ernst denBroeder
- Car bytes newbie question,
Rick Lindstedt
- fuel pump for GM TPI,
Vinnie Moscaritolo
- 'Nother pinout needed..,
Shannen Durphey
- [ADMIN] Lists are moving!,
Orin Eman
- New to the list...,
C and T
- 454SS Truck ".bin" File,
Walter Sherwin
- Prog 101,
Todorovic
- IAT MAT differences,
Bruce Plecan
- Corvette ECM,
JN
- 7730v2 ecu file,
cwagner
- [ADMIN] test - ignore,
Orin
- IAC parameters,
Barry Tisdale
- <Possible follow-ups>
- RE: IAC parameters,
Jim Sloan
- Re: IAC parameters,
Bruce Plecan
- Re: IAC parameters,
Bruce Plecan
- Re: IAC parameters,
Barry Tisdale
- Re: IAC parameters,
Shannen Durphey
- Re: IAC parameters,
Ludis Langens
- Re: IAC parameters,
Barry Tisdale
- Re: IAC parameters,
Bruce Plecan
- IAC parameters,
Barry Tisdale
- Re: IAC parameters,
Bruce Plecan
- Re: IAC parameters,
Barry Tisdale
- Re: IAC parameters,
Daniel E. Griffin
- Re: IAC parameters,
Bruce Plecan
- [admin] test 2,
John S. Gwynne
- [ADMIN] The Move,
Orin
- Re: HOORAY! and bigMaF,
Shannen Durphey
- 7730v3 ecu file,
cwagner
- DIS ?????s,
Bruce Plecan
- 89 Corvette ECM,
JN
- CarBytes v2 toolbar problem,
Paul Blackmore
- Knock Sensor Tidbit,
Ludis Langens
- Knock sensor pins,
Barry Tisdale
- ftp site,
steve ravet
- Disguised scan tool,
Shannen Durphey
- Send pics,
Mark Huffman
- Re: LT5 Info.., and 1228331 stuff in general/ KNOCKIN,
Jeff M
- 7170.ecu help,
James P Hunt
- Knock sensors,
Geoff Richards
- How do I do a quick test of a 730,
Eric Aos
- TGB Adaptation Help?,
Rex Weatherford
- TB Adaptation Help?,
Rex Weatherford
- Crossfire SES driver & 7747,
Kevin Reynolds
- 7148 -> 7783 table locs,
Patrick G. Moore
- TPI Vacuum at idle,
gabe
- 88 quad-4,
cwagner
- <Possible follow-ups>
- Re: 88 quad-4,
Shannen Durphey
- Re: 88 quad-4,
ECMnut
- Re: 88 quad-4,
cwagner
- Re: 88 quad-4,
cwagner
- Re: 88 quad-4,
Shannen Durphey
- Re: 88 quad-4,
ECMnut
- Re: 88 quad-4,
Shannen Durphey
- Re: 88 quad-4,
Shannen Durphey
- Re: 88 quad-4,
ECMnut
- Re: 88 quad-4,
ECMnut
- Re: 88 quad-4,
Bruce Plecan
- Re: 88 quad-4,
Richard Wakeling
- Re: 88 quad-4,
cwagner
- Re: 88 quad-4,
cwagner
- Re: 88 quad-4,
Bruce Plecan
- Re: 88 quad-4,
Shannen Durphey
- Re: 88 quad-4,
cwagner
- Re: 88 quad-4,
ECMnut
- Re: 88 quad-4,
cwagner
- Re: 88 quad-4,
Bruce Plecan
- Re: 88 quad-4,
Richard Wakeling
- Re: 88 quad-4,
Ludis Langens
- Re: 88 quad-4,
Programmer
- Re: 88 quad-4,
cwagner
- Re: 88 quad-4,
Bruce Plecan
- Re: 88 quad-4,
cwagner
- Re: 88 quad-4,
Charles A. Fair
- Re: 88 quad-4,
Bruce Plecan
- Re: 88 quad-4,
Charles A. Fair
- Re: 88 quad-4,
Shannen Durphey
- Re: 88 quad-4,
Charles A. Fair
- Re: 88 quad-4,
Ludis Langens
- More user friendly, please..,
Shannen Durphey
- RE: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
Michael Adams
- <Possible follow-ups>
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
Craig Moates
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
Bruce Plecan
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
PAULMARKAD
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
Shannen Durphey
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
gene l. clifford
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
Bruce Plecan
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
C and T
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
Bob Valentine
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
Mark Romans
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
Dave Zug
- RE: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
Mike Rolica
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
Bruce Plecan
- RE: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
Mike Rolica
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
Tom Sharpe
- Sorry for Mis-Post Re: Oil,
Michael Adams
- Mobil1 vs. Non-Synthetic vs. Red Line?,
Greg Hermann
- Too tired, correction to Re: 88 quad-4,
Shannen Durphey
- Northstar DIS,
Scott Knight
- <Possible follow-ups>
- Re: Northstar DIS,
Bja1078
- Re: Northstar DIS,
Shannen Durphey
- RE: Northstar DIS,
Frederic Breitwieser
- Re: Northstar DIS,
Bruce Plecan
- Re: Northstar DIS,
Bruce Plecan
- Re: Northstar DIS,
Bja1078
- Re: Northstar DIS,
Bja1078
- Re: Northstar DIS,
Bruce Plecan
- Re: Northstar DIS,
Bja1078
- Re: Northstar DIS,
Bruce Plecan
- Re: Northstar DIS,
Scott Knight
- Re: Northstar DIS,
Bja1078
- Fw: Water injection (tech refs),
Bruce Plecan
- Greddy air-fuel ratio meter,
Bruce Plecan
- <Possible follow-ups>
- Re: Greddy air-fuel ratio meter,
Patrick G. Moore
- Re: Greddy air-fuel ratio meter,
Greg Hermann
- Re: Greddy air-fuel ratio meter,
Greg Hermann
- Re: Greddy air-fuel ratio meter,
Frank F Parker
- Re: Greddy air-fuel ratio meter,
Greg Hermann
- RE: Greddy air-fuel ratio meter,
Carl Summers
- Re: Greddy air-fuel ratio meter,
Bruce Plecan
- Re: Greddy air-fuel ratio meter,
Bruce Plecan
- Re: Greddy air-fuel ratio meter,
C and T
- Re: Greddy air-fuel ratio meter,
Andrew Mattei
- Re: Greddy air-fuel ratio meter,
Bruce Plecan
- Re: Greddy air-fuel ratio meter,
Ross Myers
- 3.1L turbo vin V schematics uploaded,
steve ravet
- new to list and question,
Charles A. Fair
- [no subject],
Mike Rolica
- Crossfire mod.. plenum volume or enlarged TBIs first?,
Kevin Reynolds
- <Possible follow-ups>
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?,
Bruce Plecan
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?,
Kevin Reynolds
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?,
Bruce Plecan
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?,
Brent Obermiller
- RE: Crossfire mod.. plenum volume or enlarged TBIs first?,
Ken Kelly
- RE: Crossfire mod.. plenum volume or enlarged TBIs first?,
Squash
- RE: Crossfire mod.. plenum volume or enlarged TBIs first?,
Ken Kelly
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?,
Kevin Reynolds
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?,
Kevin Reynolds
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?,
Bruce Plecan
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?,
SPECTRO COATING CORP.
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?,
Bruce Plecan
- Anyone have a burner, eraser, or eproms they want to sell?,
Kevin Reynolds
- Public Thanks,
Bruce Plecan
- Question from newbie,
JN
- Carputing software,
Programmer
- Re: Archives? [was Greddy air-fuel ratio meter],
Rex Weatherford
- Quad 4 .bin file,
ronald . j . selberg
- EFI332 Archives,
Robert W. Hughes
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents),
Richard Wakeling
- <Possible follow-ups>
- Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents),
Roger Heflin
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents),
Roger Heflin
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents),
Scot Sealander
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents),
Bob Valentine
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents),
Walter Sherwin
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents),
Walter Sherwin
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents),
Bja1078
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents),
Roger Heflin
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents),
Bja1078
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents),
SPECTRO COATING CORP.
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents),
Shannen Durphey
- newbie question,
John LeBlanc
- 1227165 Questions,
JN
- Any broken ECM's out there?,
Michael Davis
- Attn. Richard,
ronald . j . selberg
- Tech 1 Questions,
Richard Wakeling
- Lost at CSH, HQ,
Bruce Plecan
- 727+LT1Conectr.jpg,
Shannen Durphey
- Too hot 7805,
Bruce Plecan
- <Possible follow-ups>
- RE: Too hot 7805,
Mika . Helander
- Re: Too hot 7805,
Scot Sealander
- Re: Too hot 7805,
Bruce Plecan
- RE: Too hot 7805,
Frederic Breitwieser
- RE: Too hot 7805,
Frederic Breitwieser
- RE: Too hot 7805,
Don . F . Broadus
- Re: Too hot 7805,
Barry Tisdale
- RE: Too hot 7805,
Sam Stratton
- Re: Too hot 7805,
Peter D. Hipson
- Re: Too hot 7805,
Peter D. Hipson
- Re: Too hot 7805,
Ludis Langens
- Re: Too hot 7805,
Bill Shaw
- Re: Too hot 7805,
Bruce Plecan
- Re: Too hot 7805,
Bruce Plecan
- Adapting GM ECM to Chrysler Turbo,
Thomas McCabe
- Confuzin signals,
Bruce Plecan
- IAC Orifice Data,
SPECTRO COATING CORP.
- Oil Filters,
Dave Zug.
- Dribbles, and drabbles yes EFI,
Bruce Plecan
- <Possible follow-ups>
- Re: Dribbles, and drabbles yes EFI,
Squash
- Re: Dribbles, and drabbles yes EFI,
Ward
- Re: Dribbles, and drabbles yes EFI,
Bruce Plecan
- Re: Dribbles, and drabbles yes EFI,
Bruce Plecan
- Re: Dribbles, and drabbles yes EFI,
rr
- Re: Dribbles, and drabbles yes EFI,
Tom Sharpe
- Dribbles, and drabbles yes EFI,
Dave Williams
- Re: Dribbles, and drabbles yes EFI,
Squash
- Re: Dribbles, and drabbles yes EFI,
Scot Sealander
- Re: Dribbles, and drabbles yes EFI,
Dave Williams
- Re: Dribbles, and drabbles yes EFI,
Bruce Plecan
- Re: Dribbles, and drabbles yes EFI,
Dave Zug
- High Freq MAF Problem,
Scot Sealander
- V-Maf Differences for Part #s,
Dave Zug.
- DIS ????,
Bruce Plecan
- Re: more.. DIS ????,
Shannen Durphey
- New Member here,
olbap
- Re: EFI - Terminology and acronyms,
nacelp
- Questions about chips,
FstAssBlzr
- Re: Greddy air-fuel ratio meter, really ALDL messages,
Dave Hempstead
- Re: 2 bar map sensor,
steve ravet
- <Possible follow-ups>
- RE: 2 bar map sensor,
Michael Adams
- Re: 2 bar map sensor,
nacelp
- RE: 2 bar map sensor,
Michael Adams
- Re: 2 bar map sensor,
ECMnut
- RE: 2 bar map sensor,
John_Calabrese
- RE: 2 bar map sensor,
Squash
- Re: 2 bar map sensor,
Rex Weatherford
- Re: 2 bar map sensor,
steve ravet
- RE: 2 bar map sensor,
John_Calabrese
- Re: 2 bar map sensor,
John_Calabrese
- Re: 2 bar map sensor,
Mark Romans
- Re: 2 bar map sensor,
ECMnut
- New Member, LT1 Questions,
Dave Plummer
- <Possible follow-ups>
- Re: New Member, LT1 Questions,
Bja1078
- Re: New Member, LT1 Questions,
Glen Beard
- Re: New Member, LT1 Questions,
Dave Plummer
- Re: New Member, LT1 Questions,
Dave Zug
- Re: New Member, LT1 Questions,
Peter Fenske
- Re: New Member, LT1 Questions,
Ken Kelly
- Re: New Member, LT1 Questions,
Chipsbyal
- Re: New Member, LT1 Questions,
nacelp
- Re: New Maf, a thought,
Peter Fenske
- Re: DIY-EFI.ORG (was re: 2 bar map sensor),
Shannen Durphey
- Greetings from a "new" member,
Dig
- MAF to MAP (speed density),
Programmer
- DIS-- Some Success,
nacelp
- Re: When asking ecm questions,
Jeff M
- Re: Auto learn code-Where?,
Jeff M
- Injector sizes?,
Rex Weatherford
- test, delete please,
kgil1
- Recommended books for burning???,
Kevin Reynolds
- Wide band o2,
Jeff M
- Delta ?,
Geoff Richards
- Fw: LT1 with boost.,
nacelp
- Re: Tuning, was High Freq MAF Problem,
Scot Sealander
- Re: Maf to Map again,
Peter Fenske
- <Possible follow-ups>
- Re: Maf to Map again,
nacelp
- Re: Maf to Map again,
Shannen Durphey
- Re: Maf to Map again,
thergen
- Re: Maf to Map again,
thergen
- Re: Maf to Map again,
Ludis Langens
- Re: Maf to Map again,
JTesta1966
- Re: Maf to Map again,
Programmer
- Re: Maf to Map again,
Ludis Langens
- Re: Maf to Map again,
Rick Lindstedt
- Re: Maf to Map again,
Brent Obermiller
- Re: Maf to Map again,
Rick Lindstedt
- Re: Maf to Map again,
nacelp
- Re: Maf to Map again,
nacelp
- Re: Maf to Map again,
Shannen Durphey
- Re: Maf to Map again,
Programmer
- Re: [Re: Greetings from a "new" member],
Dig
- Can anybody Identify these Components,
Richard Wakeling
- Newbie questions and intro.,
Keith
- Using 28F256 in a 747 instead of 2732A??????????,
Kevin Reynolds
- <Possible follow-ups>
- Re: Using 28F256 in a 747 instead of 2732A??????????,
Squash
- Re: Using 28F256 in a 747 instead of 2732A??????????,
Richard Wakeling
- Re: Using 28F256 in a 747 instead of 2732A??????????,
Shawn Lin
- Re: Using 28F256 in a 747 instead of 2732A??????????,
nacelp
- Re: Using 28F256 in a 747 instead of 2732A??????????,
Shawn Lin
- Re: Using 28F256 in a 747 instead of 2732A??????????,
nacelp
- Re: Using 28F256 in a 747 instead of 2732A??????????,
Richard Wakeling
- Re: Using 28F256 in a 747 instead of 2732A??????????,
Andrew K. Mattei
- Re: Using 28F256 in a 747 instead of 2732A??????????,
Bob Valentine
- RE: Using 28F256 in a 747 instead of 2732A??????????,
Mika . Helander
- Re: Using 28F256 in a 747 instead of 2732A??????????,
Shawn R. Lin
- Re: Using 28F256 in a 747 instead of 2732A??????????,
Shawn R. Lin
- Re: Using 28F256 in a 747 instead of 2732A??????????,
Shawn R. Lin
- Re: Using 28F256 in a 747 instead of 2732A??????????,
John S. Gwynne
- EPROM Burner (Modular Circuit Technology, MOD-MEP-1C) F.S.,
Keith
- Crossfire injectors.,
Kevin Reynolds
- <Possible follow-ups>
- Re: Crossfire injectors.,
nacelp
- Re: Crossfire injectors.,
Kevin Reynolds
- Re: Crossfire injectors.,
Nico Over
- RE: Crossfire injectors.,
Ken Kelly
- Re: Crossfire injectors.,
Nico Over
- Re: Crossfire injectors.,
Kevin Reynolds
- RE: Crossfire injectors.,
Ken Kelly
- Re: Crossfire injectors.,
Brent Obermiller
- Re: Crossfire injectors.,
nacelp
- Re: Crossfire injectors.,
Gregory A. Parmer
- Re: Crossfire injectors.,
nacelp
- Re: Crossfire injectors.,
John_Calabrese
- Re: Crossfire injectors.,
nacelp
- Re: Crossfire injectors.,
Shannen Durphey
- Re: Crossfire injectors.,
Programmer
- Re: Crossfire injectors.,
Barry Tisdale
- Re: Crossfire injectors.,
Gregory A. Parmer
- Re: Crossfire injectors.,
Steve Ciciora
- Re: Crossfire injectors.,
Squash
- Re: Crossfire injectors.,
Bob Valentine
- Re: Crossfire injectors.,
Ken Kelly
- Re: Crossfire injectors.,
Programmer
- Re: Crossfire injectors.,
Programmer
- Re: Crossfire injectors.,
Squash
- RE: Crossfire injectors.,
Carl Summers
- Re: Crossfire injectors.,
Fran and Bud
- Audible knock detectors,
Dave Plummer
- MAF and Calculated VE,
Scot Sealander
- Re: Big Injectors,
ECMnut
- 2732As any recommended speed or brand?,
Kevin Reynolds
- Application for ASMJ Broadcast code,
James Wilson
- Re: [Re: Using 28F256 in a 747 instead of 2732A??????????],
Dig
- GM training manuals,
steve ravet
- Re: New Member, LT1 Questions/50-55 ponders,
Jeff M
- For DIG, no EFI,
nacelp
- Ignition timing question,
Barry Tisdale
- Re: [Re: [Re: Using 28F256 in a 747 instead of 2732A??????????]],
Dig
- '165 ACWS,
Bob Valentine
- Hyp 87 Vette chip EBAY,
Dave Zug
- EPROM -> NVRAM, ALDL mode-11,
John S. Gwynne
- syclone bin,
John S. Gwynne
- Timing, revisited....,
Barry Tisdale
- Re: E85 Trucks,
Rex Weatherford
- Re: [syclone bin],
Dig
- Performance Parts,
Carl Summers
- Re: [Re: [syclone bin]],
Dig
- '165 to '730,
Davis
- rats! vats!,
Kelly Parker
- <Possible follow-ups>
- Re: rats! vats!,
PCMdoc
- Re: rats! vats!,
nacelp
- Re: rats! vats!,
Kelly Parker
- Re: rats! vats!,
Ross Myers
- Re: rats! vats!,
PCMdoc
- Re: rats! vats!,
Ward
- Re: rats! vats!,
Peter D. Hipson
- Re: rats! vats!,
Dave Zug.
- Re: rats! vats!,
Jeff M
- Re: rats! vats!,
Programmer
- Re: rats! vats!,
Ken Kelly
- Re: rats! vats!,
Brent Obermiller
- Re: rats! vats!,
Programmer
- Re: rats! vats!,
PCMdoc
- Re: rats! vats!,
Shannen Durphey
- Re: rats! vats!,
Peter D. Hipson
- VATS elimination,
Dan Plaskett
- Does anyone have an ALD file for a 730?,
Eric Aos
- Re: Reading/Study Material EFI,
kgil1
- xfire injectors now gas tanks,
nacelp
- Tools that work,
nacelp
- EFI (NC) and tool selection,
Thomas Matthews
- harness special,
Thomas Matthews
- LO3 TBI Total timing advance, how much?,
olbap
- TBI injector flow vs pressure and demand,
olbap
- WTB '730 & MEMCAL. Was '165 to '730,
Davis
- DP Ram Emulator...,
Eric Aos
- Weather proofing electronics.,
Kevin Reynolds
- How to identify eprom,
Dan Plaskett
- GM ZZ4 chip ?,
C and T
- Re: the GN [no EFI],
nacelp
- <Possible follow-ups>
- RE: the GN [no EFI],
the Fredericks
- Re: the GN [no EFI],
Dave Zug
- Re: the GN [no EFI],
ECMnut
- Re: the GN [no EFI],
DC Smith
- Re: the GN [no EFI],
Dave Zug.
- Re: the GN [no EFI],
DC Smith
- Re: the GN [no EFI],
Dave Zug.
- Re: the GN [no EFI],
Dave Zug.
- Re: the GN [no EFI],
Dave Zug.
- Re: the GN [no EFI],
Dave Zug.
- Re: the GN [no EFI],
Patrick G. Moore
- Re: the GN [no EFI],
Keith
- Re: the GN [no EFI],
John D. Bachman
- Re: the GN [no EFI],
Dave Zug
- 727,730,injectors,
Swayze
- X-Ram Crossfire intake,
Chipsbyal
- Re: 727,730,injectors Injector drivers,
nacelp
- GM ECM transplant or fuel enrichment,
Jon Watts
- To the HC11 Number Gurus,
Andrew Wakeling
- Group purchase of harness- was Re: harness special,
Thomas Matthews
- <Possible follow-ups>
- Re: Group purchase of harness- was Re: harness special,
Ludis Langens
- Re: Group purchase of harness- was Re: harness special,
Shannen Durphey
- RE: Group purchase of harness- was Re: harness special,
Carl Summers
- Re: Group purchase of harness- was Re: harness special,
Nico Over
- Re: Group purchase of harness- was Re: harness special,
Mark Romans
- Re: Group purchase of harness- was Re: harness special,
David
- Re: Group purchase of harness- was Re: harness special,
Bob Valentine
- Re: Group purchase of harness- was Re: harness special,
David
- Re: Group purchase of harness- was Re: harness special,
ECMnut
- Re: Group purchase of harness- was Re: harness special,
Kelly Parker
- Re: Group purchase of harness- was Re: harness special,
Thomas Matthews
- Re: LM3914???,
Clive Apps - 510-0020
- <Possible follow-ups>
- LM3914???,
John_Calabrese
- RE: LM3914???,
Ken Kelly
- Re: LM3914???,
John_Calabrese
- RE: LM3914???,
Frederic Breitwieser
- RE: LM3914???,
Ernst denBroeder
- RE: LM3914???,
John_Calabrese
- RE: LM3914???,
Bob Valentine
- Re: LM3914???,
Clive Apps - 510-0020
- Re: RE: LM3914???,
Regnirps
- Re: RE: LM3914???,
Orin
- RE: LM3914???,
Frederic Breitwieser
- Re: RE: LM3914???,
Regnirps
- LM3914 jameco part #,
John_Calabrese
- Re: Group purchase of wiring harness,
Don Asetta
- 88 TBI issue,
Eric Deslauriers
- Disassembler info: (was Syclone bin),
Dig
- '727/'730 v-8 .bin EGR,
Swayze
- Fuel Pump (was [Re: Crossfire injectors.]),
Dig
- '727 connectors prev:Re: How to identify eprom,
Swayze
- Re: welding tanks - was Crossfire injectors.,
Tom Sharpe
- Guidance:I am a beginer !!,
VAIDYA AJAY ASHOK
- Odp: LM3914???,
Marek Skrzypiec
- ecm bench,
Bja1078
- Group purchase of harness fizzled,
Thomas Matthews
- ald file for a '165,
John D. Bachman
- O2 sensor/tailpipe adapter?,
Ken Kelly
- Re: Need help on 87 GM Buick GN ESC pin-out...,
JTesta1966
- Anyone notice Grumpy has been MIA..??,
ECMnut
- How do you get chips out of the darn holder??,
Kevin Reynolds
- interesting site,
Swayze
- Thanks very much (Was: Need help on 87 GM Buick GN ESC pin-out.),
Iestyn Guest
- someone is selling Diacom compatible cables,
ECMnut
- <Possible follow-ups>
- RE: someone is selling Diacom compatible cables,
Dave Plummer
- RE: someone is selling Diacom compatible cables,
Frederic Breitwieser
- RE: someone is selling Diacom compatible cables,
Bob Valentine
- RE: someone is selling Diacom compatible cables,
Eric Clark
- Re: someone is selling Diacom compatible cables,
David
- Re: someone is selling Diacom compatible cables,
Frederic Breitwieser
- Re: someone is selling Diacom compatible cables,
Dave Plummer
- Re: someone is selling Diacom compatible cables,
Dave Zug
- Re: someone is selling Diacom compatible cables,
gabe
- Re: someone is selling Diacom compatible cables,
JN
- V8 '165 harness modifications,
Ernst denBroeder
- <Possible follow-ups>
- RE: V8 '165 harness modifications,
Mike rolica
- Re: V8 '165 harness modifications,
Gabe
- Re: V8 '165 harness modifications,
Ernst denBroeder
- Re: V8 '165 harness modifications,
John S. Gwynne
- Re: V8 '165 harness modifications,
John S. Gwynne
- Re: V8 '165 harness modifications,
gabe
- Re: V8 '165 harness modifications,
SPECTRO COATING CORP.
- Re: V8 '165 harness modifications,
Brent Obermiller
- Re: V8 '165 harness modifications,
Shannen Durphey
- Re: V8 '165 harness modifications,
Eric Deslauriers
- Re: V8 '165 harness modifications,
Jeff M
- Re: V8 '165 harness modifications,
Mark Romans
- Re: V8 '165 harness modifications,
JTesta1966
- RE: V8 '165 harness modifications,
Marteney, Steven J.
- Re: V8 '165 harness modifications,
JTesta1966
- RE: V8 '165 harness modifications,
Marteney, Steven J.
- Re: V8 '165 harness modifications,
SPECTRO COATING CORP.
- Re: V8 '165 harness modifications,
Ernst denBroeder
- Re: V8 '165 harness modifications,
Shannen Durphey
- Test only,
kojab
- tbi:454 vs. 350,
cwagner
- Heated O2 sensors,
Shawn R. Lin
- Re: was rats! vats! now nostalgia,
Programmer
- Re: Fuel Pump,
Terry
- RE: nostalgia,
Eric Aos
- <Possible follow-ups>
- Re: nostalgia,
Shannen Durphey
- Nostalgia,
Jeff M
- Re: nostalgia,
William Brennan
- Re: nostalgia,
Fran and Bud
- Re: nostalgia,
Frederic Breitwieser
- Re: nostalgia,
Dave Zug
- Re: nostalgia,
Sam Stratton
- Re: nostalgia,
Kevin Reynolds
- Re: nostalgia,
Ross Myers
- Re: nostalgia,
ECMnut
- RE: nostalgia,
Frederic Breitwieser
- RE: nostalgia,
Ken Kelly
- Re: nostalgia,
Mike Veldman
- RE: nostalgia,
Frederic Breitwieser
- Re: nostalgia,
Programmer
- Re: nostalgia,
Brent Obermiller
- Re: nostalgia,
Bill Shaw
- Re: Nostalgia,
Dig
- Re: nostalgia,
Mike Turner
- Re: Diacom: Is anyones selling theirs?,
Shannen Durphey
- IAC motors,
Ken Kelly
- Re: Conversion table,
Programmer
- EPROM BCC decode,
Michael Davis
- Please Ignore my previous plea Re: EPROM BCC decode,
Michael Davis
- PE mode questions.,
Kevin Reynolds
- programming specs for N821s181,
Kevin Reynolds
- Diacom problems on Thinkpads (Was Re: 88 TBI issue),
K. Wong
- ALDL (8192) command timing (sort of longish),
Dig
- Site Down?,
nacelp
- Speedometer Scaling,
Dave Plummer
- Nother ALDL grabbing method,
Dave Zug
- <Possible follow-ups>
- Re: Nother ALDL grabbing method,
Kelly Parker
- Re: Nother ALDL grabbing method,
JTesta1966
- Re: Nother ALDL grabbing method,
David
- Re: Nother ALDL grabbing method,
Ross Myers
- Re: Nother ALDL grabbing method,
Dave Zug.
- RE: Nother ALDL grabbing method,
Marteney, Steven J.
- RE: Nother ALDL grabbing method,
Jason Bonie
- RE: Nother ALDL grabbing method,
Ken Kelly
- Re: Nother ALDL grabbing method,
Dave Zug.
- Re: Nother ALDL grabbing method,
nacelp
- Re: Nother ALDL grabbing method,
nacelp
- Re: Nother ALDL grabbing method,
Dave Zug.
- OH - PS:,
Dave Zug
- 7747 Aldl Communication,
Jeremy Gonyou
- 747 aldl,
Jeremy Gonyou
- Need help with spark map's in 747.,
Kevin Reynolds
- PING,
Swayze
- [ADMIN] Server troubles.,
Jon V.
- AKFM 2174 bin,
Ernst denBroeder
- Need help with PE mode questions.,
Kevin Reynolds
- [ADMIN] When it rains...,
Jon V.
- XDEs,
nacelp
- Revised QBasic ALDL program for 165 with MAX232 on incoming,
Craig Moates
- Thinkpad 755C for sale,
Craig Moates
- Cheap Programmers\Erasers,
jweir
- O2 Sensors - Output Graphs?,
Ken Kelly
- [no subject],
Paul Blackmore
- [no subject],
Paul Blackmore
- Emulator boards,
David Cooley
- Re: GMECM Digest V2 #71,
Dig
- RE: Universal Fuel Injection Two Bolt,
Jeff M
- knock sensor readout,
John_Calabrese
- knock sensor/solid cam,
Jeffrey Scott
- <Possible follow-ups>
- Re: knock sensor/solid cam,
nacelp
- Re: knock sensor/solid cam,
Jeffrey Scott
- Re: knock sensor/solid cam,
Eric Deslauriers
- Re: knock sensor/solid cam,
nacelp
- RE: knock sensor/solid cam,
Mike rolica
- Re: knock sensor/solid cam,
Eric Clark
- RE: knock sensor/solid cam,
Ernst denBroeder
- RE: knock sensor/solid cam,
mike mager
- RE: knock sensor/solid cam,
Ernst denBroeder
- RE: knock sensor/solid cam,
Jim Sloan
- RE: knock sensor/solid cam,
mike mager
- Re: knock sensor/solid cam,
Ludis Langens
- Building PCB's,
Marc Randolph
- SLP Harness,
Squash
- Justa test ignore,
nacelp
- Still looking for bins,
nacelp
- Newbie,
BBadMonkey
- Re: XDE Documents,
Walter Sherwin
- more nother ALDL,
Dave Zug
- P4 Cylinder Select,
Ludis Langens
- Re: P4 Cylinder Select Thanks,
nacelp
- Are my posts making it? was Speedometer Scaling,
Dave Plummer
- MAP data...was Re: 48 +1 and sensor data,
John S. Gwynne
- Help with stupid question.,
Kevin Reynolds
- Desensitizing GM knock sensors,
Jim Wilson
- <Possible follow-ups>
- Re: Desensitizing GM knock sensors,
Shannen Durphey
- Re: Desensitizing GM knock sensors,
nacelp
- Re: Desensitizing GM knock sensors,
ECMnut
- Re: Desensitizing GM knock sensors,
dhardin
- Re: Desensitizing GM knock sensors,
Roger Heflin
- Re: Desensitizing GM knock sensors,
Roger Heflin
- RE: Desensitizing GM knock sensors,
Dave Plummer
- RE: Desensitizing GM knock sensors,
Roger Heflin
- Re: Desensitizing GM knock sensors,
nacelp
- Re: Desensitizing GM knock sensors,
Jim Wilson
- Re: Desensitizing GM knock sensors,
nacelp
- Re: Desensitizing GM knock sensors,
Shannen Durphey
- Re: Desensitizing GM knock sensors,
Mark Romans
- H*lp with stupid question.,
Kevin Reynolds
- Fuel prices / efficiency,
Dave Zug.
- Re: GMECM Digest V2 #78,
Jody Shapiro
- Re: Debugger board for P4 ECMs,
Swayze
- Data I/O 29B device programmer for sale,
steve ravet
- don't read, just a test.,
Kevin Reynolds
- 2.0/2.2/2.5 DIS pinouts,
Shannen Durphey
- Now Emulator was ---->RE: Debugger board for P4 ECMs,
Eric Aos
- Turbo bin uploaded to incoming,
Ludis Langens
- LT1 boost retard??,
Shannen Durphey
- 1227748 schematic updated,
Ludis Langens
- [no subject],
DAVID THOMAS
- Re: Australia based GM .ecu files,
Daniel N
- cheap eprom burner group purchase,
Bob Valentine
- Selling 68HC11 stuff,
Regnirps
- h*lp maps question,
Paul Smith
- Dummy guestion,
nacelp
- 2-bar MAP snensor,
John S. Gwynne
- Re: Just a question, how bout?,
Jeff M
- BPW numbers,
Programmer
- Any Dead MAFs ?,
Davis
- 93 F-Body M6 BIN,
Eric Clark
- Selectable chips & boost programming,
Douglas Ratcliffe
- <Possible follow-ups>
- Re: Selectable chips & boost programming,
David Cooley
- Re: Selectable chips & boost programming,
Frank
- Re: Selectable chips & boost programming,
David Cooley
- Re: Selectable chips & boost programming,
Programmer
- Re: Selectable chips & boost programming,
Programmer
- Re: Selectable chips & boost programming,
cwagner
- Re: Selectable chips & boost programming,
nacelp
- Re: Selectable chips & boost programming,
Keith
- Re: Selectable chips & boost programming,
Programmer
- Re: Selectable chips & boost programming,
Dave Zug
- Re: Selectable chips & boost programming,
Programmer
- Re: Selectable chips & boost programming,
David Cooley
- Re: Selectable chips & boost programming,
Ludis Langens
- Re: Selectable chips & boost programming,
BBadMonkey
- Re: Selectable chips & boost programming,
David Cooley
- Re: Selectable chips & boost programming,
Programmer
- Re: Selectable chips & boost programming,
David Cooley
- Re: Selectable chips & boost programming,
Programmer
- Re: Selectable chips & boost programming,
David Cooley
- Re: Selectable chips & boost programming,
Roger Heflin
- Re: Selectable chips & boost programming,
Shannen Durphey
- RE: Selectable chips & boost programming,
Marteney, Steven J.
- RE: Selectable chips & boost programming,
Roger Heflin
- Re: Selectable chips & boost programming,
Ludis Langens
- cjkw1922_AUST.BIN,
Sutcliffe, Peter
- Motorola S code to binary conversion program/utility,
Jason R. Haines
- ABS-OFF TOPIC-OFFLIST,
Mike Swayze
- Mysterious rogue connector,
Marteney, Steven J.
- Speedometer,
cwagner
- Analog Cadillac/Bendix to'730,
Russ Harms
- Newbie to list,
MdntRdr1
- Re: Speedometer - transparent first-surface reflector needed!,
mike mager
- Re: re:speedo-heads up disply was: speedometer-transparent first surface reflector needed,
Frank
- Odp: ABS-OFF TOPIC-OFFLIST,
Marek Skrzypiec
- Troublesome Eprom,
Shannen Durphey
- Re: speedo-heads up disply was: speedometer-transparent first surface reflector needed,
Shawn R. Lin
- MEMCAL swap '88 to '89 (identical cars),
Shawn R. Lin
- LS1 Pinouts,
Ross Myers
- eprom carriers,
NickG
- re:MEMCALs was:Re: Analog Cadillac/Bendix to'730,
Swayze
- lost 27 emails,
Programmer
- need corvette bin file,
NickG
- Re: Using 28F256 ...,
Jeremy Gonyou
- reprogramming MAF xfer function in '165 ECM,
NickG
- New files on FTP site,
Shannen Durphey
- Motorola chip and more,
Carl Summers
- fast chip,
Pat Ford
- Schematic proofreader needed,
Ludis Langens
- curious about sfi,
Mike Swayze
- Re: Selectable chips & boost programming (thanks),
Douglas Ratcliffe
- 305-350CAM,
Programmer
- Lt1 Optispark,
Douglas Ratcliffe
- Flow Chart,
nacelp
- ALDL Communications,
Jeremy Gonyou
- 6in1 EPROM,
David Cooley
- '727('730) sfi was:Re: curious about sfi,
Mike Swayze
- Re: 2-bar MAP sensor,
John S. Gwynne
- New .bins on ftp site,
Shannen Durphey
- DIS again--sensor interface,
Mike Swayze
- fastchips,
Pat Ford
- Rom Changers,
Christian Hack
- Frederic Breitwieser is famous!! (noefi),
John_Calabrese
- To NOP, or not to NOP...,
Shannen Durphey
- Plug reading,
David Cooley
- <Possible follow-ups>
- Re: Plug reading,
Programmer
- Re: Plug reading,
David Cooley
- Re: Plug reading,
nacelp
- Re: Plug reading,
David Cooley
- Re: Plug reading,
David Cooley
- Re: Plug reading,
Programmer
- Re: Plug reading,
Programmer
- Re: Plug reading,
David Cooley
- Re: Plug reading,
Programmer
- Plug Reading,
Bruce Plecan
- RE: Plug Reading,
Mike Rolica
- Re: Plug Reading,
Bruce Plecan
- RE: Plug Reading,
Mike Rolica
- Re: Plug Reading,
Dominic Sorresso
- Re: Plug Reading,
Bruce Plecan
- Re: Plug Reading,
Ernst denBroeder
- Re: Plug Reading,
Dominic Sorresso
- RE: Plug Reading,
Mike Rolica
- RE: Plug Reading,
David Cooley
- Re: Plug Reading,
Len Sabatine
- Re: Plug Reading,
David Cooley
- Re: Plug Reading,
Swayze
- RE: Plug Reading,
Mike Rolica
- RE: Plug Reading,
Rudi M. Machilek
- Re: Plug Reading,
Bruce Plecan
- Re: Plug Reading,
Bruce Plecan
- Re: Plug Reading,
Bruce Plecan
- Re: Plug Reading,
Dominic Sorresso
- Re: Plug Reading,
Bruce Plecan
- Re: Plug Reading,
Swayze
- RE: Plug Reading,
Len Sabatine
- Re: Plug Reading,
Shannen Durphey
- Flow rates on injectors 2.8 & 3.1 engines,
Dan Plaskett
- VR Sensors,
Bill Shaw
- 1227730/1227749 Schematic,
Ludis Langens
- algrippocode.zip,
Swayze
- 2 bar axxc bin for '7730,
John S. Gwynne
- List member virus alert,
Mike Pitts
- Fw: Dummy at CSH, HQ,
nacelp
- 305 to 350,
Jeremy Gonyou
- Need some injector info,
Carl Summers
- .Bin needed,
Shannen Durphey
- #INTRO: New List Member,
Webmaster
- Fwd: *ALERT* Worm Virus Spreading thru Buick community,
JTesta1966
- injector flow (links and question),
Mike Swayze
- GM Powertrain,
303print
- Lotus carlton ECU?,
Dave Evans
- VATS,
Keith Lund
- Administrivia,
Orin
- Signal generator for ecm bench,
Scott Knight
- AWWH and AWUP,
Dr.Acacio
- 89 F-body ECU file = 89 Y-body ECU file?,
Marteney, Steven J.
- <Possible follow-ups>
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
nacelp
- RE: 89 F-body ECU file = 89 Y-body ECU file?,
Marteney, Steven J.
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
nacelp
- RE: 89 F-body ECU file = 89 Y-body ECU file?,
Marteney, Steven J.
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
Shannen Durphey
- RE: 89 F-body ECU file = 89 Y-body ECU file?,
Mike rolica
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
Michael Davis
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
Ernst denBroeder
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
Michael Davis
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
John S. Gwynne
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
nacelp
- RE: 89 F-body ECU file = 89 Y-body ECU file?,
Marteney, Steven J.
- RE: 89 F-body ECU file = 89 Y-body ECU file?,
Mike Rolica
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
nacelp
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
Michael Davis
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
nacelp
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
nacelp
- RE: 89 F-body ECU file = 89 Y-body ECU file?,
Mike Rolica
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
nacelp
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
David Cooley
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
Swayze
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
cwagner
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
nacelp
- 89 F-body ECU file = 89 Y-body ECU file?,
Mark Romans
- RE: 89 F-body ECU file = 89 Y-body ECU file?,
Mike rolica
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
nacelp
- 4L60E Trans controller,
gene l. clifford
- <Possible follow-ups>
- Re: 4L60E Trans controller,
Ward
- RE: 4L60E Trans controller,
Scott Parkhurst
- Re: 4L60E Trans controller,
nacelp
- Re: 4L60E Trans controller,
Swayze
- Re: 4L60E Trans controller,
nacelp
- Re: 4L60E Trans controller,
Scott Knight
- Re: 4L60E Trans controller,
gene l. clifford
- Re: 4L60E Trans controller,
Shannen Durphey
- RE: 4L60E Trans controller,
alexpeper
- RE: 4L60E Trans controller,
Scott Parkhurst
- RE: 4L60E Trans controller,
Scott Parkhurst
- RE: 4L60E Trans controller,
Scott Parkhurst
- Re: 4L60E Trans controller,
nacelp
- RE: 4L60E Trans controller,
Greg Hermann
- RE: 4L60E Trans controller,
Greg Hermann
- Re: 4L60E Trans controller,
Greg Hermann
- RE: 4L60E Trans controller,
Scott Parkhurst
- RE: 4L60E Trans controller,
Scott Parkhurst
- RE: 4L60E Trans controller,
Scott Parkhurst
- Re: 4L60E Trans controller,
Shannen Durphey
- Re: 4L60E Trans controller,
Shannen Durphey
- RE: 4L60E Trans controller,
alexpeper
- RE: 4L60E Trans controller,
Carl Summers
- ALDL via the sound card,
Steve Ciciora
- Big cams are better,
joe boucher
- Idle richness with 7747.,
Kevin Reynolds
- RN Carriers for 2732A EPROMS,
Craig Marcho
- O2 voltage on Diacom,
Marteney, Steven J.
- Re: 4L60E Trans controller/Ward,
gene l. clifford
- Intro and a Request!,
Craig Marcho
- Re: CYCLONE 700R4 AWD VSS,
Shannen Durphey
- Re: 4L60E trans controller,
Nykyforuk
- 730/727 instead of 7747... Has it been done?,
olbap
- VE stability,
John S. Gwynne
- HEI,
Guenther,Max [ASCO/PA]
- MAP signal dampening,
Swayze
- <Possible follow-ups>
- Re: MAP signal dampening,
nacelp
- Re: MAP signal dampening,
Swayze
- Re: MAP signal dampening,
gabe
- RE: MAP signal dampening,
alexpeper
- Re: MAP signal dampening,
Ward
- Re: MAP signal dampening,
Ward
- RE: MAP signal dampening,
Carl Summers
- RE: MAP signal dampening,
Carl Summers
- Re: MAP signal dampening,
Swayze
- RE: MAP signal dampening,
Mike (Perth, Western Australia)
- RE: MAP signal dampening,
Mike rolica
- RE: MAP signal dampening,
alexpeper
- RE: MAP signal dampening,
Greg Hermann
- Re: MAP signal dampening,
Programmer
- Re: MAP signal dampening,
Tom Sharpe
- RE: Map Signal Dampening,
Michael Adams
- Re: MAP signal dampening,
Programmer
- Re: MAP signal dampening,
Tom Sharpe
- Re: MAP signal dampening,
Programmer
- Re: MAP signal dampening,
Tom Sharpe
- Re: MAP signal dampening,
Programmer
- missed digest 106,
Nykyforuk
- Bosch ecm,
Geoff Campbell
- Dumping beyond $FFFF,
Ross Myers
- BBC TB Needed,
nacelp
- '747 top end fuel leanout,
NickG
- thermistor time was: 89 F-body ECU file = 89 Y-body ECU file?,
alexpeper
- Re: MAP signal damping,
Gerald Pelnar
- Re: Sensor response times; was 89 F-body ECU,
Thomas Matthews
- Re: MAP signal damping/more cam help,
Jeff M
- engine simulator,
nacelp
- 91 Lotus Carlton ECU,
Webmaster
- <Possible follow-ups>
- Re: 91 Lotus Carlton ECU,
nacelp
- RE: 91 Lotus Carlton ECU,
Webmaster
- Re: 91 Lotus Carlton ECU,
nacelp
- Re: 91 Lotus Carlton ECU,
Shannen Durphey
- Re: 91 Lotus Carlton ECU,
Shannen Durphey
- Re: 91 Lotus Carlton ECU,
Shannen Durphey
- Re: 91 Lotus Carlton ECU,
ECMnut
- Re: 91 Lotus Carlton ECU,
ECMnut
- RE: 91 Lotus Carlton ECU,
Webmaster
- Re: 91 Lotus Carlton ECU,
ECMnut
- Re: 91 Lotus Carlton ECU,
Shannen Durphey
- Re: 91 Lotus Carlton ECU,
Ludis Langens
- Re: 91 Lotus Carlton ECU,
ECMnut
- Re: 91 Lotus Carlton ECU,
SPECTRO COATING CORP.
- Re: 91 Lotus Carlton ECU,
Swayze
- ANHT,
Guenther,Max [ASCO/PA]
- 7730ALDL,
cwagner
- VSS differences for 746 to 730 swap,
olbap
- Wacky idea to force Alpha-n on a SD gm ecm.. a silly idea for thoes with map woes,
olbap
- AKFL bin - anyone have AMXY?,
Peter Gargano
- ALDL, ANHT,
cwagner
- Ford to GM swap...,
David Cooley
- dumb & dumber,
gene l. clifford
- <Possible follow-ups>
- Re: dumb & dumber,
Swayze
- Re: dumb & dumber,
David Cooley
- Re: dumb & dumber,
steve ravet
- RE: dumb & dumber,
Carl Summers
- Re: dumb & dumber,
nacelp
- Re: dumb & dumber,
nacelp
- Re: dumb & dumber,
Shannen Durphey
- Re: dumb & dumber,
Shannen Durphey
- Re: dumb & dumber,
Shannen Durphey
- Re: dumb & dumber,
Swayze
- Re: dumb & dumber,
gene l. clifford
- Re: dumb & dumber,
steve ravet
- RE: dumb & dumber,
Scott Parkhurst
- Re: dumb & dumber,
Shannen Durphey
- Re: dumb & dumber,
Swayze
- Re: dumb & dumber,
Shannen Durphey
- Re: dumb & dumber,
Swayze
- Re: dumb & dumber,
nacelp
- Horsepower!!!,
David Cooley
- <Possible follow-ups>
- RE: Horsepower!!!,
Marteney, Steven J.
- RE: Horsepower!!!,
Squash
- RE: Horsepower!!!,
David Cooley
- RE: Horsepower!!!,
Dave Plummer
- RE: Horsepower!!!,
David Cooley
- RE: Horsepower!!!,
Squash
- Re: Horsepower!!!,
Tom Sharpe
- Re: Horsepower!!!,
Dave Zug
- RE: Horsepower!!!,
Don . F . Broadus
- RE: Horsepower!!!,
Squash
- RE: Horsepower!!!,
eclark
- RE: dumb & dumber (from the dumbest :-),
Marteney, Steven J.
- 700R4 TCC Solenoid bad? (limited EFI content),
Peter Gargano
- <Possible follow-ups>
- Re: 700R4 TCC Solenoid bad? (limited EFI content),
steve ravet
- Re: 700R4 TCC Solenoid bad? (limited EFI content),
David Cooley
- Re: 700R4 TCC Solenoid bad? (limited EFI content),
nacelp
- Re: 700R4 TCC Solenoid bad? (limited EFI content),
mike mager
- Re: 700R4 TCC Solenoid bad? (limited EFI content),
Chipsbyal
- Re: 700R4 TCC Solenoid bad? (limited EFI content),
Patrick G. Moore
- Re: 700R4 TCC Solenoid bad? (limited EFI content),
Roger Heflin
- Re: 700R4 TCC Solenoid bad? (limited EFI content),
Programmer
- Re: 700R4 TCC Solenoid bad? (limited EFI content),
Shannen Durphey
- Re: 700R4 TCC Solenoid bad? (limited EFI content),
John T. Martin
- Re: 700R4 TCC Solenoid bad? (limited EFI content),
Peter Gargano
- Re: 700R4 TCC Solenoid bad? (limited EFI content),
Programmer
- Re: dumb & dumber/bad #,
gene l. clifford
- 1226156,
Programmer
- HLR0977 - '85 Corvette Export EPROM,
Craig Marcho
- PCM min for tranny oper,
nacelp
- RE: Paddle Shifters - Electronic Trans Controller,
Scott Parkhurst
- MAP sensors,
Mike Swayze
- Fw: 12497316,
gene l. clifford
- Ignition Simulator,
nacelp
- Re: AWWH and AWUP (and BAMY),
Walter Sherwin
- Re: 12497316/ fax copy,
gene l. clifford
- Re: TCC lockup on 700R4,
Dig
- Delco,
black maj
- Re: Wacky idea to force Alpha-n on a SD gm ecm,
Ludis Langens
- TCom_MAP EFax,
Mike Swayze
- PCM Questions,
Shawn R. Lin
- My turn for a conversion,
JTesta1966
- Re: Color Tune - Safety Warning !,
robert . schofield
- Cam tuning,
Douglas Ratcliffe
- <Possible follow-ups>
- Re: Cam tuning,
nacelp
- Re: Cam tuning,
Roger Heflin
- Re: Cam tuning,
Jim Wilson
- Re: Cam tuning,
Douglas Ratcliffe
- Re: Cam tuning,
Jim Wilson
- Re: Cam tuning,
nacelp
- Re: Cam tuning,
nacelp
- Re: Cam tuning,
Jim Wilson
- RE: Cam tuning,
the Fredericks
- RE: Cam tuning,
Douglas Ratcliffe
- cam tuning,
Jim Wilson
- Re: Cam tuning,
Robert Eickhorst
- Re: Cam tuning,
nacelp
- Re: Cam tuning,
nacelp
- RE: Cam tuning,
the Fredericks
- RE: Cam tuning,
Roger Heflin
- Re: Cam tuning,
Jim Wilson
- Re: Cam tuning,
nacelp
- Re: Cam tuning,
Douglas Ratcliffe
- Re: Cam tuning,
Roger Heflin
- Re: Cam tuning,
Barry Tisdale
- Re: Cam tuning,
Jim Wilson
- Re: Cam tuning,
nacelp
- Re: Cam tuning,
nacelp
- Re: Cam tuning,
ECMnut
- Re: Cam tuning,
Scott Knight
- Re: Cam tuning,
Shannen Durphey
- Re: Cam tuning,
Scott Knight
- Re: Cam tuning,
Shannen Durphey
- Re: Cam tuning,
Scott Knight
- Re: Cam tuning,
Ludis Langens
- Re: Cam tuning,
Shannen Durphey
- Re: Cam tuning,
Ludis Langens
- Re: Cam tuning,
nacelp
- Re: Cam tuning,
Scott Knight
- Re: Cam tuning,
nacelp
- KalMaker experience?,
Peter Gargano
- LS1 in 64 Impala SS,
Dave & Irina Eicher
- E(E)PROM pn and speeds,
Bob Valentine
- TPI 747,
nacelp
- 7747 Bin needed,
Jeremy Gonyou
- power towers ??,
Programmer
- GM circuit numbering,
Peter Gargano
- DIS again,
Swayze
- Newbies, and archives,
nacelp
- Help with '85 Corvette '870 ECM,
Craig Marcho
- added baro sensor to 730,
jsg
- Speedo scaler,
nacelp
- TBI vs Port Injected,
Rich Vandervoort
- <Possible follow-ups>
- Re: TBI vs Port Injected,
nacelp
- Re: TBI vs Port Injected,
Chipsbyal
- Re: TBI vs Port Injected,
Doug Dayson
- Re: TBI vs Port Injected,
nacelp
- Re: TBI vs Port Injected,
Ward
- Re: TBI vs Port Injected,
Rich Vandervoort
- Re: TBI vs Port Injected,
David Cooley
- Re: TBI vs Port Injected,
ECMnut
- Re: TBI vs Port Injected,
David Cooley
- Re: TBI vs Port Injected,
nacelp
- MAF part no needed 88 vin C,
nacelp
- BLM collection!?,
Kevin Reynolds
- 88 asd super chip,
Mike
- Driving an HEI Module with other signals,
Peter Gargano
- <Possible follow-ups>
- Re: Driving an HEI Module with other signals,
Bob Valentine
- Re: Driving an HEI Module with other signals,
Shannen Durphey
- Re: Driving an HEI Module with other signals,
nacelp
- Re: Driving an HEI Module with other signals,
Brent Obermiller
- Re: Driving an HEI Module with other signals,
mike mager
- RE: Driving an HEI Module with other signals,
Don . F . Broadus
- Re: Driving an HEI Module with other signals,
Mike Veldman
- RE: Driving an HEI Module with other signals,
Don . F . Broadus
- Re: Driving an HEI Module with other signals,
nacelp
- Re: Driving an HEI Module with other signals,
Mike Veldman
- Re: Driving an HEI Module with other signals,
Peter Gargano
- Re: Driving an HEI Module with other signals,
Programmer
- Re: Driving an HEI Module with other signals,
Ward
- Re: Driving an HEI Module with other signals,
Programmer
- A/F gauges and O2 sensors.,
Kevin Reynolds
- RE: Distributor Machine/Ignition Tests,
Don . F . Broadus
- HEI Module versions?,
Peter Gargano
- E-prom ereaser& burner,
gene l. clifford
- <Possible follow-ups>
- Re: E-prom ereaser& burner,
black maj
- RE: E-prom ereaser& burner,
Craig Marcho
- Re: E-prom ereaser& burner,
Brent Obermiller
- Re: E-prom ereaser& burner,
nacelp
- Re: E-prom ereaser& burner,
nacelp
- Re: E-prom ereaser& burner,
gene l. clifford
- Re: E-prom ereaser& burner,
gene l. clifford
- Re: E-prom ereaser& burner,
gene l. clifford
- Re: E-prom ereaser& burner,
nacelp
- Re: E-prom ereaser& burner,
ECMnut
- Re: E-prom ereaser& burner,
ECMnut
- Re: E-prom ereaser& burner,
NickG
- Re: E-prom ereaser& burner,
Bob Valentine
- Re: E-prom ereaser& burner,
gene l. clifford
- Re: E-prom ereaser& burner,
Shawn R. Lin
- Re: E-prom ereaser& burner,
Bob Valentine
- Re: E-prom ereaser& burner,
Keith
- Re: E-prom ereaser& burner,
JN
- Re: E-prom ereaser& burner,
Roger Heflin
- Re: E-prom ereaser& burner,
gene l. clifford
- Re: E-prom ereaser& burner,
gene l. clifford
- Re: E-prom ereaser& burner,
Programmer
- Re: E-prom ereaser& burner,
Roger Heflin
- Re: E-prom ereaser& burner,
steve ravet
- Re: E-prom ereaser& burner,
nacelp
- Re: E-prom ereaser& burner,
Roger Heflin
- Re: E-prom ereaser& burner,
nacelp
- Re: E-prom ereaser& burner,
David Cooley
- Re: E-prom ereaser& burner,
Dr.Acacio
- Re: E-prom ereaser& burner,
Shawn R. Lin
- Re: E-prom ereaser& burner,
David Cooley
- VE table 1 & 2 relationship, and BLMs past 3600rpm.,
Kevin Reynolds
- Reconditioned PB10s $40 off was E-prom burner & eraser.,
Kevin Reynolds
- ECMS for sale,
nacelp
- Emulator,
Barry Tisdale
- First GN chip,
nacelp
- <Possible follow-ups>
- Re: First GN chip,
JTesta1966
- Re: First GN chip,
nacelp
- Re: First GN chip,
DC Smith
- Re: First GN chip,
Programmer
- Re: First GN chip,
nacelp
- RE: First GN chip,
the Fredericks
- Re: First GN chip,
nacelp
- Re: First GN chip,
David Cooley
- Re: First GN chip,
nacelp
- Re: First GN chip,
nacelp
- Re: First GN chip,
JTesta1966
- Re: First GN chip,
JTesta1966
- Re: First GN chip,
nacelp
- Re: First GN chip,
nacelp
- Checksum questions,
Bob Valentine
- <Possible follow-ups>
- Re: Checksum questions,
nacelp
- Re: Checksum questions,
Scot Sealander
- Re: Checksum questions,
TK
- Re: Checksum questions,
Bob Valentine
- Re: Checksum questions,
ECMnut
- Re: Checksum questions,
Bob Valentine
- Re: Checksum questions,
TK
- Re: Checksum questions,
nacelp
- Re: Checksum questions,
nacelp
- Re: Checksum questions,
ECMnut
- Re: Checksum questions,
nacelp
- Re: Checksum questions,
ECMnut
- Re: Checksum questions,
TK
- Re: Checksum questions,
Shannen Durphey
- Re: Checksum questions,
nacelp
- Re: Checksum questions,
DC Smith
- Re: Checksum questions,
Ludis Langens
- Re: Checksum questions,
Ross Myers
- Re: Checksum questions,
DC Smith
- Did I miss something?,
BBadMonkey
- Re: Pocket Programmer,
John T. Martin
- Re: Pocket Programmer , brain fade,
John T. Martin
- Re: GM Alternate fuel service manuals,
John T. Martin
- <Possible follow-ups>
- GM Alternate fuel service manuals,
PHXSYS
- Re: GM Alternate fuel service manuals,
kb4mxo
- Re: GM Alternate fuel service manuals,
PHXSYS
- Re: GM Alternate fuel service manuals,
PHXSYS
- Re: GM Alternate fuel service manuals,
Chipsbyal
- Re: GM Alternate fuel service manuals,
Mike (Perth, Western Australia)
- Re: GM Alternate fuel service manuals,
Mike (Perth, Western Australia)
- Re: GM Alternate fuel service manuals,
Dig
- Re: GM Alternate fuel service manuals,
PHXSYS
- Re: GM Alternate fuel service manuals,
Ross Myers
- Re: GM Alternate fuel service manuals,
PHXSYS
- Re: GM Alternate fuel service manuals,
Ross Myers
- New member with VE table Q's,
Joe Shuhy
- ND 1181281,
Swayze
- ECM compatibility,
C and T
- Quad-4 (1228707 ECM) Rough Idle Problem,
Will Remaklus
- <Possible follow-ups>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
ECMnut
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Will Remaklus
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
ECMnut
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
nacelp
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Will Remaklus
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Will Remaklus
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Ludis Langens
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Will Remaklus
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
nacelp
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
david garnier
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Will Remaklus
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
nacelp
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Will Remaklus
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Shannen Durphey
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Shannen Durphey
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
nacelp
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
remaklus
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
remaklus
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Shannen Durphey
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Mark Romans (ICQ#66838770)
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
mike mager
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
mike mager
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Brent Obermiller
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Rex Weatherford
- Xeltek EPROM Programmers (Pls Read),
Ross Myers
- mil light,
Mike
- Bosch ABS info,
Stuart Bunning
- 52 Lb injectors,
DC Smith
- Injector Problem,
Carl Summers
- MEFI3 was GM Powertrain,
303print
- new subscriber please help ecm problem,
Ed Stoll
- Scanners vs Diacom (and recording scanners),
nacelp
- Wastegate Controller,
nacelp
- [no subject],
Paul Blackmore
- Boost controller,
nacelp
- 7749 guru needed....,
Barry Tisdale
- <Possible follow-ups>
- Re: 7749 guru needed....,
nacelp
- Re: 7749 guru needed....,
Barry Tisdale
- Re: 7749 guru needed....,
nacelp
- Re: 7749 guru needed....,
Ludis Langens
- Re: 7749 guru needed....,
nacelp
- Re: 7749 guru needed....,
Barry Tisdale
- Re: 7749 guru needed....,
TK
- Re: 7749 guru needed....,
nacelp
- Re: 7749 guru needed....,
Barry Tisdale
- Re: 7749 guru needed....,
nacelp
- Re: 7749 guru needed....,
Ludis Langens
- Re: 7749 guru needed....,
Barry Tisdale
- Re: 7749 guru needed....,
Barry Tisdale
- RE: 7749 guru needed....,
Jim Sloan
- RE: 7749 guru needed....,
Barry Tisdale
- Re: 7749 guru needed....,
TK
- Re: 7749 guru needed....,
Ludis Langens
- Re: 7749 guru needed....,
Ludis Langens
- Re: 7749 guru needed....,
Green
- Re: 7749 guru needed....,
Scot Sealander
- Re: 7749 guru needed....,
Green
- Re:alldata/was new subscriber please help ecm problem,
Mike Rolica
- GM Eprom Bin file,
Todd Burkard
- Bins are us,
nacelp
- <Possible follow-ups>
- Re: Bins are us,
steve ravet
- Re: Bins are us,
Ross Myers
- RE: Bins are us,
Webmaster
- Bins are us,
nacelp
- RE: Bins are us,
Marteney, Steven J.
- RE: Bins are us,
Guenther,Max [ASCO/PA]
- Re: Bins are us,
Swayze
- Re: Bins are us,
Programmer
- Re: Bins are us,
Bob Valentine
- Re: Bins are us,
nacelp
- Re: Bins are us,
Ross Myers
- Re: Bins are us,
Shannen Durphey
- RE: Bins are us,
Webmaster
- Re: Bins are us,
Shannen Durphey
- Re: Bins are us,
Programmer
- Re: Bins are us,
Ludis Langens
- Re: Bins are us,
Walter Sherwin
- V6 ALDL Communications,
Jeremy Gonyou
- GM 4 cylinder DIS,
Jurgen Hartwig
- 77 caddy manual,
Swayze
- spking of octane was Re: Bins are us,
Swayze
- Re: Pocket Programmer/thanks,
Jeff M
- Prom ID's,
TK
- Re: Pocket Programmer/Finished <(©¿©)>,
Jeff M
- Fw: MSD sellin Crap Still,
nacelp
- What is the dynamic range of the AFR sweeps across stoichiometric?,
mike mager
- Quick question on coolant temp sensors,
Marteney, Steven J.
- ignition map,
John_Calabrese
- Stupid question on fuel pressure,
Marteney, Steven J.
- Re: basic chevy tbi question,
Hotrodderzzz
- Maps, and newbie stuff,
nacelp
- Novice Question,
Todd Burkard
- <Possible follow-ups>
- RE: Novice Question,
Carl Summers
- Re: Novice Question,
Jeff Flanary
- RE: Novice Question,
Bob Valentine
- Re: Novice Question,
nacelp
- RE: Novice Question,
Carl Summers
- Re: Novice Question,
Peter Gargano
- Re: Novice Question,
Shannen Durphey
- Re: Novice Question,
Ludis Langens
- RE: Novice Question,
Guenther,Max [ASCO/PA]
- Re: Novice Question,
nacelp
- RE: Novice Question,
Guenther,Max [ASCO/PA]
- Re: Novice Question,
nacelp
- Re: Novice Question,
David Cooley
- Re: Novice Question,
Shannen Durphey
- Re: Novice Question,
Shannen Durphey
- Re: Novice Question,
Pat Ford
- Calpak,
Jeff Flanary
- Emulator Software,
Todd Burkard
- EMulator checks,
David Cooley
- Knock @ 1975 RPMs,
Barry Tisdale
- Pocket Programmer & Emulator,
DC Smith
- <Possible follow-ups>
- Re: Pocket Programmer & Emulator,
JTesta1966
- Re: Pocket Programmer & Emulator,
DC Smith
- Re: Pocket Programmer & Emulator,
JTesta1966
- Re: Pocket Programmer & Emulator,
Michael Davis
- Re: Pocket Programmer & Emulator,
DC Smith
- Re: Pocket Programmer & Emulator,
Jeff Flanary
- Re: Pocket Programmer & Emulator,
Jeff M
- Re: Pocket Programmer & Emulator,
DC Smith
- Re: Pocket Programmer & Emulator,
Jeff M
- Re: Pocket Programmer & Emulator,
DC Smith
- Re: Pocket Programmer & Emulator,
Jeff M
- Second O2 sensor guestion,
nacelp
- EGR,
Rich Vandervoort
- Disposable meter,
nacelp
- Re: Knock sensor selection for 383 SBC,
nacelp
- Turbo MAP & MAT interaction,
Webmaster
- <Possible follow-ups>
- Re: Turbo MAP & MAT interaction,
Scot Sealander
- RE: Turbo MAP & MAT interaction,
Webmaster
- RE: Turbo MAP & MAT interaction,
Webmaster
- Re: Turbo MAP & MAT interaction,
Jeff M
- Re: Turbo MAP & MAT interaction,
nacelp
- Re: Turbo MAP & MAT interaction,
Jeff M
- Re: Turbo MAP & MAT interaction,
nacelp
- Re: Turbo MAP & MAT interaction,
Scot Sealander
- RE: Turbo MAP & MAT interaction,
Webmaster
- Re: Turbo MAP & MAT interaction,
nacelp
- Re: Turbo MAP & MAT interaction,
Scot Sealander
- Re: Turbo MAP & MAT interaction,
Scot Sealander
- RE: Turbo MAP & MAT interaction,
Malcolm Robb, LC 0112G
- RE: Turbo MAP & MAT interaction,
David Cooley
- Re: Turbo MAP & MAT interaction,
Scot Sealander
- CCC Pinout needed,
nacelp
- eprom,
Todd Burkard
- 2000 RPM knock,
Barry Tisdale
- Re: GMECM Digest V2 #149,
Dig
- manifold machining,
Thomas Matthews
- <Possible follow-ups>
- Re: manifold machining,
nacelp
- Re: manifold machining,
Frederic Breitwieser
- Re: manifold machining,
cbrooks1
- Re: manifold machining,
David Cooley
- RE: manifold machining,
Frederic Breitwieser
- Re: manifold machining,
John_Calabrese
- RE: manifold machining,
John_Calabrese
- Re: manifold machining,
nacelp
- Re: manifold machining,
nacelp
- RE: manifold machining,
Frederic Breitwieser
- Re: manifold machining,
nacelp
- Re: manifold machining,
nacelp
- RE: manifold machining,
Frederic Breitwieser
- RE: manifold machining,
Frederic Breitwieser
- RE: manifold machining,
Dave Williams
- Re: manifold machining,
Peter Gargano
- Re: manifold machining,
mike mager
- Re: manifold machining,
nacelp
- Re: manifold machining,
Peter Gargano
- Re: manifold machining,
Frederic Breitwieser
- Re: manifold machining,
David Cooley
- Re: manifold machining,
Thomas Matthews
- Re: manifold machining,
Frederic Breitwieser
- Sensitivity of GM Knock Sensors,
Jim Wilson
- <Possible follow-ups>
- Re: Sensitivity of GM Knock Sensors,
Mark Romans (ICQ#66838770)
- Sensitivity of GM Knock Sensors,
Jim Wilson
- Re: Sensitivity of GM Knock Sensors,
Mark Romans (ICQ#66838770)
- Re: Sensitivity of GM Knock Sensors,
nacelp
- Re: Sensitivity of GM Knock Sensors,
nacelp
- RE: Sensitivity of GM Knock Sensors,
Carl Summers
- Re: Sensitivity of GM Knock Sensors,
Jim Wilson
- Re: Sensitivity of GM Knock Sensors,
nacelp
- Re: Sensitivity of GM Knock Sensors,
nacelp
- Sensitivity of GM Knock Sensors,
Jim Wilson
- Re: Sensitivity of GM Knock Sensors,
nacelp
- Sensitivity of GM Knock Sensors,
Jim Wilson
- Re: Sensitivity of GM Knock Sensors,
nacelp
- Sensitivity of GM Knock Sensors,
Jim Wilson
- Re: Sensitivity of GM Knock Sensors,
nacelp
- Sensitivity of GM Knock Sensors,
Jim Wilson
- Fw: Need help with Opel...,
Ron Gregory
- Bowling for scripts:,
Shannen Durphey
- ever heard of this ECM?,
NickG
- TurboLink [was Re: Wastegate Controller],
Jason R. Haines
- ONE WIRE O2 TO HEATED O2,
Todd Burkard
- Sensitivity of GM Knock Sensors.,
Jim Wilson
- Hardware/software questions...,
Steve Cauffiel
- Programming Voltage,
Jeff Flanary
- Digital Speedometer,
cwagner
- another Memcal ?,
Todd Burkard
- 4.3L S10 questions,
Douglas Ratcliffe
- Re: Hardware/software,
Steve Cauffiel
- efi chevy in a old ford,
Mike
- PROGRAMING QUESTION,
Todd Burkard
- 1228331 ECU Processor,
Malcolm Robb, LC 0112G
- 2.8 maf to ad conversion.,
Kevin Reynolds
- Re: 1228331 ECU Processor (P4 processor info),
Peter Gargano
- TBI to TPI Conversion,
Todd Burkard
- Memcal ESC Filter Numbers,
Scot Sealander
- Quad 4 W41 binary file,
ronald . j . selberg
- ASBX code is AMXY,
Peter Gargano
- Emissions and Chip Burning,
Craig Marcho
- ECM in an Olds Bravada?,
Douglas Ratcliffe
- Old code 41,
nacelp
- Re: Old code 41Handled, Thanks,
nacelp
- oscilloscope for windows,
Swayze
- 1227730 ECM on Ebay,
Shawn R. Lin
- Re: P4 processor info,
Peter Gargano
- Re: CarBytes v3 is to be released as EFIlive v3,
Barry Tisdale
- free schematic software,
steve ravet
- Carprom vs. Promedit,
Andrew K. Mattei
- Re: ASBX code is AMXY - memory emulator,
mike mager
- Re: Memory Emulator (was ASBX code is AMXY),
Peter Gargano
- Turbo_P4_Doc.pdf & BKZO,
Peter Gargano
- <Possible follow-ups>
- Re: Turbo_P4_Doc.pdf & BKZO,
Jeff M
- Re: Turbo_P4_Doc.pdf & BKZO,
Peter Gargano
- Re: Turbo_P4_Doc.pdf & BKZO,
Ludis Langens
- Re: Turbo_P4_Doc.pdf & BKZO,
ECMnut
- Re: Turbo_P4_Doc.pdf & BKZO,
Peter Gargano
- Re: Turbo_P4_Doc.pdf & BKZO,
ECMnut
- Re: Turbo_P4_Doc.pdf & BKZO,
Shannen Durphey
- Re: Turbo_P4_Doc.pdf & BKZO,
Shannen Durphey
- Re: Turbo_P4_Doc.pdf & BKZO,
Peter Gargano
- Re: Turbo_P4_Doc.pdf & BKZO,
ECMnut
- Re: Turbo_P4_Doc.pdf & BKZO,
ECMnut
- Re: Turbo_P4_Doc.pdf & BKZO,
Shannen Durphey
- AED Vehicle Controller Interface and software for sale - calibration equipment,
Jason R. Haines
- PID B/L INT,
nacelp
- RE: Updated '747 ignition info,
nacelp
- *ECU FILE FOR 165,
Todd Burkard
- AZTY BCC,
rr
- ECU file for '870???? Anyone? Bueller?,
Craig Marcho
- Low Impedance Injector driver info,
Keith
- (no subject),
gloz
- PID control stategy book?,
Jason R. Haines
- Re: Turbo_P4_Doc.pdf,
Ron Gregory
- Eprom???,
Jeff Flanary
- PCM connectors,
nacelp
- <Possible follow-ups>
- Re: PCM connectors,
Roger Heflin
- Re: PCM connectors,
Chipsbyal
- Re: PCM connectors,
nacelp
- Re: PCM connectors,
Jennifer Green & Scott Peitzsch
- Re: PCM connectors,
nacelp
- Re: PCM connectors,
Jason R. Haines
- Re: PCM connectors,
nacelp
- Re: PCM connectors,
Andrew Mattei
- Re: PCM connectors,
Shannen Durphey
- Re: PCM connectors,
PCMdoc
- Re: PCM connectors,
PCMdoc
- B/L INT Numbers,
nacelp
- 165 to 730 conversion in F-body,
Marteney, Steven J.
- Re: GMECM Digest V2 #166,
Dig
- 101,
Geoff Richards
- <Possible follow-ups>
- Re: 101,
Peter Gargano
- Did I just learn something? - 8051,
mike mager
- LeMans EFI wiring diagram for 1227303?,
Peter Gargano
- Re: 6811 Disassembler (was Memory Emulator, which was ASBX code is AMXY),
Donald Whisnant
- Re: 6811 Disassembler,
Peter Gargano
- Vortec TPI Manifold on the way,
Bob Groger
- Australian ECM Wiring Diagrams,
Peter Gargano
- Conversion program,
Geoff Richards
- Burning,
black maj
- MC68332 disassembler ?,
Daniel Henriksson
- EFI - Does it really work like that ?,
Malcolm Robb, LC 0112G
- MAF to speed density?,
Kelly Parker
- It's alive!,
rr
- adjusting fuel for gearing...,
Shane Buss
- TBI Injector Rates,
Jeremy Gonyou
- GM EFI parts for sale,
tim ganger
- Disassemblers - Generate compiler code-x's source code?,
Peter Gargano
- generic question,
Ken & Rae Bauman
- Trouble with Pocket Programmer,
Jeff Kopp
- Where's Winbin?,
Andrew K. Mattei
- VSS,
black maj
- <Possible follow-ups>
- Re: VSS,
black maj
- Re: VSS,
nacelp
- Re: VSS,
black maj
- Re: VSS,
nacelp
- Re: VSS,
David Cooley
- Re: VSS,
Peter D. Hipson
- Re: VSS,
black maj
- Re: VSS,
nacelp
- Re: VSS,
Peter D. Hipson
- Re: VSS,
black maj
- BCC's for Australian apps,
Matt Tomlins
- GM EFI parts,
J. T. Spilman
- FYI - More cam-less engine news,
Marteney, Steven J.
- Fuel pressure question, again,
Marteney, Steven J.
- intersting link,
Mike Swayze
- Temp sensor,
nacelp
- <Possible follow-ups>
- RE: Temp sensor,
Carl Summers
- Re: Temp sensor,
Frank F Parker
- RE: Temp sensor,
Michael Adams
- Re: Temp sensor,
Chipsbyal
- Re: Temp sensor,
nacelp
- Re: Temp sensor,
nacelp
- Re: Temp sensor,
Shannen Durphey
- Re: Temp sensor,
Peter D. Hipson
- Re: Temp sensor,
nacelp
- Re: Temp sensor,
Peter D. Hipson
- Re: Temp sensor,
nacelp
- Re: Temp sensor,
Mike Dillon
- Re: Temp sensor,
nacelp
- Re: Temp sensor,
Peter D. Hipson
- Re: Temp sensor,
nacelp
- RE: Temp sensor,
Rudi Machilek
- Re: Temp sensor,
Peter D. Hipson
- Re: Temp sensor,
Swayze
- unsubscribing,
mike mager
- ALDL,
Jeff Flanary
- one step back = one step up...,
Shannen Durphey
- build your own MAF???,
Kelly Parker
- BLM cell boarder values,
Dave Zug.
- <Possible follow-ups>
- RE: BLM cell boarder values,
Marteney, Steven J.
- Re: BLM cell boarder values,
Dave Zug.
- Re: BLM cell boarder values,
Ludis Langens
- Re: BLM cell boarder values,
Dave Zug.
- Re: BLM cell boarder values,
Wayne Johnson
- RE: BLM cell boarder values,
Marteney, Steven J.
- RE: BLM cell boarder values,
Wayne Johnson
- Re: BLM cell boarder values,
Dave Zug.
- RE: BLM cell boarder values,
Roger Heflin
- Re: BLM cell boarder values,
turbo31 v6
- Re: BLM cell boarder values,
nacelp
- RE: BLM cell boarder values,
Marteney, Steven J.
- RE: BLM cell boarder values,
Marteney, Steven J.
- Re: BLM cell boarder values,
Dave Zug.
- Re: BLM cell boarder values,
Dave Zug.
- Re: BLM cell boarder values,
nacelp
- Re: BLM cell boarder values,
Jeff M
- Re: BLM cell boarder values,
Jeff M
- Re: BLM cell boarder values,
nacelp
- Re: BLM cell boarder values,
Shannen Durphey
- RE: BLM cell boarder values,
Wayne Johnson
- Re: BLM cell boarder values,
Dave Zug.
- Re: BLM cell boarder values,
Shannen Durphey
- My Blm Question,
Dave Zug.
- Test please delete,
turbo31 v6
- Turbo Tuning,
turbo31 v6
- Re: Turbo Tuning/VE,
Jeff M
- VE#1 + VE#2 can I zero ve#2 until 3200 rpm??,
olbap
- turbo tuning posts,
NickG
- 16196911,
Jeff Flanary
- TCC question in '165,
Marteney, Steven J.
- Wide Range O2, Throttle by wire, Cat Conv, and EGR,
Rich Vandervoort
- compiling/programing,
Mike Rolica
- Notable stuff,
nacelp
- Re: Turbo Tuning author,
Jeff M
- POW WOW tenitive date,
nacelp
- Timing computations,
nacelp
- AXDH0179?,
TK
- MAF Mess,
Bill Shaw
- FILTMPH,
Dig
- source for junkyard pulls,
Swayze
- Test bench,
Geoff Richards
- ecm_testbench,
nacelp
- 2532 EPROM,
Jeff Flanary
- Asynch vs Synch Injection,
Jeremy Gonyou
- <Possible follow-ups>
- Re: Asynch vs Synch Injection,
nacelp
- Re: Asynch vs Synch Injection,
Dave Zug.
- Re: Asynch vs Synch Injection,
steve ravet
- Re: Asynch vs Synch Injection,
Ken Kelly
- Re: Asynch vs Synch Injection,
Jeffrey Scott
- Re: Asynch vs Synch Injection,
Jim Sloan
- Re: Asynch vs Synch Injection,
ECMnut
- Re: Asynch vs Synch Injection,
Dave Zug.
- Re: Asynch vs Synch Injection,
Jeff M
- Re: Asynch vs Synch Injection,
Shannen Durphey
- Re: Asynch vs Synch Injection,
Jeremy Gonyou
- Re: Asynch vs Synch Injection,
Shannen Durphey
- Re: Asynch vs Synch Injection,
nacelp
- Re: Asynch vs Synch Injection,
nacelp
- Re: Asynch vs Synch Injection,
nacelp
- Re: Asynch vs Synch Injection,
Jeremy Gonyou
- Re: Asynch vs Synch Injection,
ECMnut
- 2532,
Jeff Flanary
- Sorry no efi, National Organ, and tissue awaremess week,
nacelp
- <Possible follow-ups>
- RE: Sorry no efi, National Organ, and tissue awaremess week,
Carl Summers
- Re: Sorry no efi, National Organ, and tissue awaremess week,
David Cooley
- Re: Sorry no efi, National Organ, and tissue awaremess week,
Thomas Matthews
- Re: Sorry no efi, National Organ, and tissue awaremess week,
Jeff M
- Re: Sorry no efi, National Organ, and tissue awaremess week,
Dave Zug.
- Re: Sorry no efi, National Organ, and tissue awaremess week,
Mark Romans (ICQ#66838770)
- Re: Sorry no efi, National Organ, and tissue awaremess week,
Doug Dayson
- Re: BLM cell boarder values: ECM GUY PAGE,
Dave Zug.
- Turbo tuning reviesed/injectors,
Jeff M
- Meter,
nacelp
- Source of PCM crimp "Micro-Pack" connectors,
Peter Gargano
- Odp: Source of PCM crimp "Micro-Pack" connectors,
Marek Skrzypiec
- Favorite things about these lists...,
Steve Cauffiel
- ECM's Exchange? Can a 1227303 replace 1227165?,
Mark Romans (ICQ#66838770)
- LeMans BIN and/or wiring diagram (for 1227303),
Peter Gargano
- BLM numbers,
Mark Romans (ICQ#66838770)
- Newbie needs advice,
akallotte
- '747 IAC stuff,
rr
- MAF sensor,
cwagner
- BUA in source form - was Re: '747 IAC stuff,
Peter Gargano
- 1227xxx --> 165, 277, 303, 752, 808, etc...,
Peter Gargano
- 1227165 solder side scan of PCB?,
Peter Gargano
- Re: ALDL connector,
Swayze
- [no subject],
Pat Ford
- Fw: Asynch/asynch,
nacelp
- '7429, first crack at it!,
Ernst denBroeder
- Free Data Acquisition Starter Kit,
Steven Ciciora
- The Turbo Shop URL,
nacelp
- Illegal Operations,
Shawn R. Lin
- Re: GMECM Digest V2 #183,
Alex Bratovic
- RE: Illegal operation,
Dave Hempstead
- Help!,
Ernst denBroeder
- Crossfire Injection Question,
Brent Obermiller
- Odp: Odp: Source of PCM crimp "Micro-Pack" connectors,
Marek Skrzypiec
- 87 to 89 ECM,
akallotte
- 7749 question,
Barry Tisdale
- Re: cal pak ID,
nacelp
- Re: GMECM Digest V2 #181,
Dig
- Re: Howell TPI book on Ebay,
nacelp
- TPI 327 Timing,
Todd Burkard
- book,
Jeff Flanary
- RedHat Linux Mentions Engine Controller in Embedded Systems PR,
Carl Summers
- EFIlive v3 is due out this weekend,
Paul Blackmore
- Air temps and fuel,
nacelp
- [no subject],
Carl Summers
- Re: '7727 on ebay $6,
ECMnut
- ECM's,
Todd Burkard
- Messages,
Romans, Mark
- [No EFI] ABS Help Needed,
Mike Turner/ENGR/HQ/KEMET/US
- <Possible follow-ups>
- Re: [No EFI] ABS Help Needed,
Len sabatine
- Re: [No EFI] ABS Help Needed,
Programmer
- Re: [No EFI] ABS Help Needed,
nacelp
- Re: [No EFI] ABS Help Needed,
PHXSYS
- Re: [No EFI] ABS Help Needed,
Programmer
- Re: [No EFI] ABS Help Needed,
Programmer
- Re: [No EFI] ABS Help Needed,
Shannen Durphey
- Re: [No EFI] ABS Help Needed,
Shannen Durphey
- Re: [No EFI] ABS Help Needed,
Len sabatine
- Re: [No EFI] ABS Help Needed,
Mike Turner
- Re: [No EFI] ABS Help Needed,
Shannen Durphey
- Re: [No EFI] ABS Help Needed,
Rich Vandervoort
- RE: [No EFI] ABS Help Needed,
Malcolm Robb, LC 0112G
- Re: [No EFI] ABS Help Needed,
Shannen Durphey
- GM ECM to run a rotary engine,
Jason R. Haines
- Got my Brainmaster today....,
C and T
- DirectScan "RAM Scan Tool",
Peter Gargano
- Another GM EFI link,
Ross Myers
- CATS Disassembler comments,
Peter Gargano
- EFIlive v3 evaluation version is available at...,
Paul Blackmore
- ECM #,
nacelp
- <Possible follow-ups>
- Re: ECM #,
rr
- Re: ECM #,
ECMnut
- Re: ECM #,
rr
- Re: ECM #,
Scot Sealander
- Re: ECM #,
Shannen Durphey
- Re: ECM #,
Shannen Durphey
- Re: ECM #,
Programmer
- Re: ECM #,
Shannen Durphey
- Re: ECM #,
rr
- Re: ECM #,
rr
- Re: ECM #,
TK
- Re: ECM #,
Shannen Durphey
- Big part sale,
nacelp
- Stock TPI vs Super Ram plenum volume Question,
Romans, Mark
- Need help: power programming eprom,
93 Formula
- Re: ECM #,
Wayne Johnson
- Re: Need help: Thanks & Other Software,
93 Formula
- '90 Calpaks and PROMs,
TRAX
- <Possible follow-ups>
- Re: '90 Calpaks and PROMs,
Roger Heflin
- Re: '90 Calpaks and PROMs,
eclark
- Re: '90 Calpaks and PROMs,
TRAX
- Re: '90 Calpaks and PROMs,
Roger Heflin
- Re: '90 Calpaks and PROMs,
TRAX
- Re: '90 Calpaks and PROMs,
Peter Gargano
- Re: '90 Calpaks and PROMs,
Bob Valentine
- Re: '90 Calpaks and PROMs,
Roger Heflin
- Re: '90 Calpaks and PROMs,
Peter Gargano
- Re: '90 Calpaks and PROMs,
Shannen Durphey
- Re: '90 Calpaks and PROMs,
TRAX
- Re: '90 Calpaks and PROMs,
Peter Gargano
- Re: '90 Calpaks and PROMs,
TK
- Re: '90 Calpaks and PROMs,
Keith
- Re: '90 Calpaks and PROMs,
Kevin Crain
- Re: '90 Calpaks and PROMs,
Roger Heflin
- Re: 2 bar MAP on a ZR1?,
Tyler Townsley
- leaky injectors??,
John S. Gwynne
- Running a 305 with '747,
Kurek, Larry
- <Possible follow-ups>
- Re: Running a 305 with '747,
Jeff Flanary
- RE: Running a 305 with '747,
Kurek, Larry
- Re: Running a 305 with '747,
Shannen Durphey
- Re: Running a 305 with '747,
Ludis Langens
- Running a 305 with '747,
Dave Williams
- Re: Running a 305 with '747,
Jeff Flanary
- RE: Running a 305 with '747,
Kurek, Larry
- Re: Running a 305 with '747,
Shannen Durphey
- ESC filters and Re: '90 Calpaks and PROMs,
Marc Randolph
- Home Dyno,
Craig Marcho
- Re: 400 sbc in place of 350, 747 ecm,
Hotrodderzzz
- Re: ESC filters,
Peter Gargano
- Re: GMECM Digest V2 #192,
Dig
- bin uploaded,
Wayne Johnson
- <Possible follow-ups>
- Re: bin uploaded,
nacelp
- Re: bin uploaded,
Wayne Johnson
- BIN uploaded,
Squash
- Re: BIN uploaded,
Bruce Plecan
- Re: BIN uploaded,
Squash
- Re: BIN uploaded,
Bruce Plecan
- Re: BIN uploaded,
KasaRyan
- Re: BIN uploaded,
KasaRyan
- Re: BIN uploaded,
Bruce Plecan
- Re: bin uploaded,
Bruce Plecan
- bin uploaded,
cwagner
- Re: bin uploaded,
Bruce Plecan
- Re: bin uploaded,
Bruce Plecan
- Re: bin uploaded,
cwagner
- Re: bin uploaded,
cwagner
- Re: bin uploaded,
Shannen Durphey
- somebody tell me what went wrong.,
Craig Marcho
- Erasing EPROMs - was Re: '90 Calpaks and PROMs,
Peter Gargano
- Cold Start programming and programming for 24lb injectors,
trax
- ID 1227747,
Omer N Ozkul
- o2 Switching extremes, '165,
Dave Zug
- ACSP Coolant Sensor?,
Peter Gargano
- IAT Sensor,
nacelp
- Dead PB-10,
nacelp
- Archives seem to be down,
Eric Deslauriers
- blue streak 727,
Swayze
- Turbo V6 Tuniing continued,
Jeff M
- <Possible follow-ups>
- Re: Turbo V6 Tuniing continued,
JTesta1966
- Re: Turbo V6 Tuniing continued,
nacelp
- Re: Turbo V6 Tuniing continued,
JTesta1966
- Re: Turbo V6 Tuniing continued,
Barry Tisdale
- Re: Turbo V6 Tuniing continued,
Jeff M
- Re: Turbo V6 Tuniing continued,
Jeff M
- Re: Turbo V6 Tuniing continued,
Jeff M
- Re: Turbo V6 Tuniing continued,
nacelp
- Re: Turbo V6 Tuniing continued,
Barry Tisdale
- Re: Turbo V6 Tuniing continued,
Barry Tisdale
- Re: Turbo V6 Tuniing continued,
JTesta1966
- Re: Turbo V6 Tuniing continued,
Jim Wilson
- Re: Turbo V6 Tuniing continued,
Jeff M
- Re: Turbo V6 Tuniing continued,
TK
- Re: Turbo V6 Tuniing continued,
Ludis Langens
- Re: Turbo V6 Tuniing continued,
Jeff M
- Spark Plugs....,
Rex Weatherford
- <Possible follow-ups>
- Re: Spark Plugs....,
nacelp
- Re: Spark Plugs....,
John_Calabrese
- Re: Spark Plugs....,
Rex Weatherford
- Re: Spark Plugs....,
Programmer
- Re: Spark Plugs....,
nacelp
- Re: Spark Plugs....,
nacelp
- Re: Spark Plugs....,
Programmer
- Re: Spark Plugs....,
nacelp
- Re: Spark Plugs....,
Rex Weatherford
- Re: Spark Plugs....,
John_Calabrese
- Re: Spark Plugs....,
Gabe
- Re: Spark Plugs....,
nacelp
- Re: Spark Plugs....,
John_Calabrese
- Re: Spark Plugs....,
nacelp
- Re: Spark Plugs....,
Nico Over
- RE: Spark Plugs....,
Rodney Fulk
- Voltage MAF with 1227730,
Ludis Langens
- Re: Turbo V6 Tuning continued,
Jeff M
- Re: Turbo V6 Tuniing continued/Intronics Emulator update,
Jeff M
- Virus Warning,
Todd Burkard
- Scanner sw for a '94 LT1 caprice.,
Rodney Fulk
- 165 ECM question, "single fire" vs "double fire",
Rick Lindstedt
- <Possible follow-ups>
- Re: 165 ECM question, "single fire" vs "double fire",
Romans, Mark
- Re: 165 ECM question, "single fire" vs "double fire",
Kevin Crain
- Re: 165 ECM question, "single fire" vs "double fire",
Romans, Mark
- Re: 165 ECM question, "single fire" vs "double fire",
Peter Gargano
- Re: 165 ECM question, "single fire" vs "double fire",
Ludis Langens
- Re: 165 ECM question, "single fire" vs "double fire",
nacelp
- Re: 165 ECM question, "single fire" vs "double fire",
Swayze
- Re: 165 ECM question, "single fire" vs "double fire",
Peter Gargano
- Re: 165 ECM question, "single fire" vs "double fire",
nacelp
- Re: 165 ECM question, "single fire" vs "double fire",
ECMnut
- Re: 165 ECM question, "single fire" vs "double fire",
Kevin Crain
- Re: 165 ECM question, "single fire" vs "double fire",
Michael Davis
- Re: 165 ECM question, "single fire" vs "double fire",
Rick Lindstedt
- Seeking '749,
Bill Shaw
- 1981 Cadillac Fleetwood Brougham d'Elegance,
Peter Gargano
- RE: Spark Plugs....now could be marelli computer,
Carl Summers
- Re: Turbo V6 Tuniing continued + Benchtop ECU,
Barry Tisdale
- diacom on 95 3.1,
Wayne Johnson
- Gal/Hr and Grm/Sec Info,
JTesta1966
- RE: Spark Plugs....torquemasters,
Carl Summers
- Intercooler temps (again),
nacelp
- <Possible follow-ups>
- Re: Intercooler temps (again),
Jeremy Gonyou
- Re: Intercooler temps (again),
nacelp
- Re: Intercooler temps (again),
ECMnut
- Re: Intercooler temps (again),
nacelp
- RE: Intercooler temps (again),
Carl Summers
- Re: Intercooler temps (again),
ECMnut
- Re: Intercooler temps (again),
nacelp
- RE: Intercooler temps (again),
Malcolm Robb, LC 0112G
- Re: Intercooler temps (again),
nacelp
- Re: Intercooler temps (again),
nacelp
- RE: Intercooler temps (again),
Michael Hagopian
- RE: Intercooler temps (again),
Malcolm Robb, LC 0112G
- IAT / MATs,
nacelp
- Spark Plugs...Indexing,
Romans, Mark
- Re :Intercooler/o2 volts/Injector constant,
Dig
- Filtmph and boost tables followup,
Dig
- 16bit MAF xfer function in '165,
NickG
- DIACOM Errors,
Scot Sealander
- Intercooler info.,
nacelp
- Trans Computer,
Rodney Fulk
- Fun times. . .,
rr
- New ALDL 2 transistor circuit (critique),
Peter Gargano
- '165 o2 switching v/s WOT level,
Dave Zug.
- Problem reading original EPROM,
Marteney, Steven J.
- <Possible follow-ups>
- Re: Problem reading original EPROM,
Patrick G. Moore
- RE: Problem reading original EPROM,
Marteney, Steven J.
- Re: Problem reading original EPROM,
Roger Heflin
- Re: Problem reading original EPROM,
Shannen Durphey
- Re: Problem reading original EPROM,
Romans, Mark
- Re: Problem reading original EPROM,
Jeff Kopp
- Re: Problem reading original EPROM,
Programmer
- RE: Problem reading original EPROM,
Marteney, Steven J.
- Quad4 Update (off topic),
Rex Weatherford
- Re: 2 transistor interface,
Dig
- Idle Learn,
Jeff Flanary
- Cheap, (But is it crap?) GM Code reader F.S.,
Ross Myers
- Benchtop ECU question,
Barry Tisdale
- First chip ready,
Todd Burkard
- <Possible follow-ups>
- Re: First chip ready,
Andrew Mattei
- RE: First chip ready,
trax
- RE: First chip ready,
Pat Ford
- Re: First chip ready,
Programmer
- Re: First chip ready,
Shannen Durphey
- Re: First chip ready,
Shannen Durphey
- Re: First chip ready,
nacelp
- Re: First chip ready,
Shannen Durphey
- Re: First chip ready,
Thomas Matthews
- RE: First chip ready,
Marteney, Steven J.
- Trinoic Engine Management System,
Jeremy Gonyou
- Re: first chip done,
Russ Harms
- I/O Ports in Assembler,
Andy Whittaker - Chester UK
- Test - Ignore,
Walter Sherwin
- Changing Injector Constant,
93 Formula
- Dayton Hamvention Hamfest,
Steven Ciciora
- Burner for sale,
nacelp
- 91 Pont Brain Teaser,
Todd Burkard
- Reorted O2 volts,
nacelp
- Looking at Diacom,
nacelp
- Looking for .bin,
Shannen Durphey
- Base Pulse Widths,
nacelp
- .Bin found,
Shannen Durphey
- Re: Reported O2 volts,
nacelp
- EPROM won't program correctly,
trax
- code 13 on 89 cavalier.. 730 ecm,
Mike Rolica
- [no subject],
rrauscher
- Diacom Help,
Rex Weatherford
- <Possible follow-ups>
- Re: Diacom Help,
Kevin Crain
- Re: Diacom Help,
Roger Heflin
- Re: Diacom Help,
nacelp
- Re: Diacom Help,
nacelp
- Re: Diacom Help,
Rex Weatherford
- Re: Diacom Help,
Dave Zug.
- Re: Diacom Help,
Roger Heflin
- Re: Diacom Help,
nacelp
- Re: Diacom Help,
Dave Zug.
- Re: Diacom Help,
Roger Heflin
- Re: Diacom Help,
Barry Tisdale
- Re: Diacom Help,
alexpeper
- RE: Diacom Help,
Dave Plummer
- Diacom help,
Steven Ciciora
- Re: Diacom help,
Bruce Plecan
- Re: Diacom help,
Jeremy Gonyou
- Re:,
Jeremy Gonyou
- Re:,
nacelp
- 16141470 ECU,
Scott Flanagan
- Re:,
rrauscher
- eprom id,
fat slug
- Re:,
rrauscher
- DTC pop quiz,
Kelly Parker
- EPROM Reader Problems Deleting Chip? EMERGENCY,
Scott Flanagan
- ION Plugs,
Romans, Mark
- Problem at Ludis' site,
Andy Whittaker - Chester UK
- Re: DTC pop quiz, Correction,
nacelp
- Automobile Ride, Handling, and Suspension,
nacelp
- Scope vs reported,
Barry Tisdale
- Re: fuel pressure vs altitude,
nacelp
- 7747 Spark Map ?,
Marvin Johnson
- The Physics of Racing,
Garfield Willis
- ALDL Reported BPW,
Barry Tisdale
- Quad 4 code,
cwagner
- 0-25d C MAT IAT,
nacelp
- A few lt1 ?'s,
Mike
- <Possible follow-ups>
- Re: A few lt1 ?'s,
Chipsbyal
- Re: A few lt1 ?'s,
Mike
- Re: A few lt1 ?'s,
Shannen Durphey
- Re: A few lt1 ?'s,
Chipsbyal
- Re: A few lt1 ?'s,
Mike
- Re: A few lt1 ?'s,
Ken Kelly
- Re: A few lt1 ?'s,
Len sabatine
- Re: A few lt1 ?'s,
Programmer
- Re: A few lt1 ?'s,
Chipsbyal
- Re: A few lt1 ?'s,
Peter Gargano
- Re: A few lt1 ?'s,
nacelp
- Re: A few lt1 ?'s,
Mike
- Re: A few lt1 ?'s,
Mike
- Re: A few lt1 ?'s,
Chipsbyal
- Re: A few lt1 ?'s,
Mike
- Re: A few lt1 ?'s,
Ken Kelly
- Re: A few lt1 ?'s,
black maj
- Re: A few lt1 ?'s,
Mike
- Re: A few lt1 ?'s,
Ken Kelly
- Re: A few lt1 ?'s,
Mike
- Re: A few lt1 ?'s,
Scott Peitzsch
- Re: A few lt1 ?'s,
nacelp
- Re: A few lt1 ?'s,
Jennifer Green & Scott Peitzsch
- Re: A few lt1 ?'s,
nacelp
- Re: A few lt1 ?'s,
Programmer
- EPROMs are programming AOK,
TRAX
- <Possible follow-ups>
- Re: EPROMs are programming AOK,
Peter Gargano
- Re: EPROMs are programming AOK,
Shannen Durphey
- Re: EPROMs are programming AOK,
Ludis Langens
- Re: EPROMs are programming AOK,
TRAX
- Re: EPROMs are programming AOK,
TRAX
- Re: EPROMs are programming AOK,
Peter Gargano
- Re: EPROMs are programming AOK,
steve ravet
- RE: EPROMs are programming AOK,
trax
- Re: EPROMs are programming AOK,
Peter Gargano
- RE: EPROMs are programming AOK,
Mika . Helander
- TPS Style Connectors: Where to find?,
Tom Meagher
- CPU Register Serial Data Readings.,
Ross Myers
- PWs & misc.,
Roseanna Tisdale
- Scope vs reported + 02 as reported,
nacelp
- Injector duty cycle formula?,
Rex Weatherford
- Re: Injector duty cycle formula? Graphing diagnostics,
nacelp
- RE: ecm newbie,
Daniel E. Griffin
- Flying Cow?,
Garfield Willis
- ECM Code reader,
Dave Zug
- Whatsa 2732DC?,
nacelp
- 7749 ECU PW musings.....,
Roseanna Tisdale
- EGOR Sneek Peek,
Garfield Willis
- New 4-cyl 1227727 bin,
Ludis Langens
- s2bin converter,
nacelp
- Finding direction without a MAP...,
Shannen Durphey
- Archive info,
Squash
- 749 questions,
Bill Shaw
- ebay '727,
Swayze
- Re: 730 ecm,
Daniel E. Griffin
- ANLX-5474 update?,
Mika . Helander
- RE: Astro Van PCM was--->Running a 305 with '747,
Kurek, Larry
- Re: Turbo V6 Tuniing continued/Intronics Emulator update/checksum,
Jeff M
- Re: ANLX-5474 update?YES,
Chipsbyal
- Piggy backing 165 ECM chips,
Rick Lindstedt
- Coil Connector Question,
Squash
- EPROM Switching,
nacelp
- O2 volts diacom and the 1227148,
nacelp
- Data on 16034984,
Andy Whittaker - Chester UK
- Re: Delco controllers,
Pat Ford
- Fabulous Service @ Needhams,
nacelp
- <Possible follow-ups>
- Re: Fabulous Service @ Needhams,
Chipsbyal
- Re: Fabulous Service @ Needhams,
Programmer
- Re: Fabulous Service @ Needhams,
nacelp
- Re: Fabulous Service @ Needhams,
Jeremy Gonyou
- Re: Fabulous Service @ Needhams,
nacelp
- Re: Fabulous Service @ Needhams,
Jeff M
- Re: Fabulous Service @ Needhams,
Jeremy Gonyou
- Re: Fabulous Service @ Needhams,
Daniel E. Griffin
- Re: Fabulous Service @ Needhams,
Andrew K. Mattei
- Re: Fabulous Service @ Needhams,
Daniel E. Griffin
- .LT1 to .bin conversion,
Kelly Parker
- Just soo obvious,
nacelp
- Re: Fuel Injector Connector - *the MALE side* ?,
ECMnut
- <Possible follow-ups>
- Re: Fuel Injector Connector - *the MALE side* ?,
nacelp
- Re: Fuel Injector Connector - *the MALE side* ?,
Thomas McCabe
- Fuel Injector Connector - *the MALE side* ?,
Garfield Willis
- Re: Fuel Injector Connector - *the MALE side* ?,
Garfield Willis
- Re: Fuel Injector Connector - *the MALE side* ?,
Garfield Willis
- Re: Fuel Injector Connector - *the MALE side* ?,
Jeff M
- Re: Fuel Injector Connector - *the MALE side* ?,
Jeff M
- Re: Fuel Injector Connector - *the MALE side* ?,
Garfield Willis
- Re: Fuel Injector Connector - *the MALE side* ?,
Garfield Willis
- Re: Fuel Injector Connector - *the MALE side* ?,
Len sabatine
- Re: Fuel Injector Connector - *the MALE side* ?,
Rich Vandervoort
- Re: Fuel Injector Connector - *the MALE side* ?,
Garfield Willis
- Re: Fuel Injector Connector - *the MALE side* ?,
nacelp
- Re: Fuel Injector Connector - *the MALE side* ?,
Garfield Willis
- Re: Fuel Injector Connector - *the MALE side* ?,
Patrick G. Moore
- Re: Fuel Injector Connector - *the MALE side* ?,
Rich Vandervoort
- Re: Fuel Injector Connector - *the MALE side* ?,
Garfield Willis
- Re: Fuel Injector Connector - *the MALE side* ?,
Frank F Parker
- Re: Fuel Injector Connector - *the MALE side* ?,
Garfield Willis
- Re: Fuel Injector Connector - *the MALE side* ?,
Walter Sherwin
- akdx2088 vs akmh1143,
Marvin Johnson
- Faulty Injector - Clues,
Dave Zug
- pic of memcal,
Pat Ford
- pcm controlled nitrous,
Kelly Parker
- Nice Cheap Essential Tool for SMT work...,
Garfield Willis
- RE: P&H Injector Interface,
Eric Aos
- <Possible follow-ups>
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Swayze
- Re: P&H Injector Interface,
Len sabatine
- P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Len sabatine
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Swayze
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Romans, Mark
- Re: P&H Injector Interface,
Len sabatine
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Romans, Mark
- Re: P&H Injector Interface,
Len sabatine
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Laura & Neil
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Len sabatine
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Shannen Durphey
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- P&H Injector Interface,
Romans, Mark
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Brent Obermiller
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Swayze
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Swayze
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Walter Sherwin
- Re: P&H Injector Interface,
Swayze
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Walter Sherwin
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Walter Sherwin
- Re: P&H Injector Interface,
Walter Sherwin
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Swayze
- Re: P&H Injector Interface,
Walter Sherwin
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: Suppliers,
Jeff M
- Re: P&H Injector Interface/Accel VIC,
Jeff M
- CSH, HQ closed for a few days,
nacelp
- <Possible follow-ups>
- Re: CSH, HQ closed for a few days,
Swayze
- Re: CSH, HQ closed for a few days,
JTesta1966
- Re: CSH, HQ closed for a few days,
Jim Wilson
- Re: CSH, HQ closed for a few days,
Barry Tisdale
- Re: CSH, HQ closed for a few days,
ECMnut
- Re: CSH, HQ closed for a few days,
Dave Zug
- Not as OT as it might seem :),
Eric Aos
- Re: Suppliers fyresleeving,
Jeff M
- Flash mis-wring,
TK
- Prom Carriers,
nacelp
- Chip upgrades,
KasaRyan
- coil repair harness #'s,
Shannen Durphey
- Back to Diacom,
nacelp
- Software and ALDL,
MdntRdr1
- EFIlive & SyTys,
Barry Tisdale
- Convert 6 cyl tacho for use with 4 cyl,
Peter Gargano
- <Possible follow-ups>
- Re: Convert 6 cyl tacho for use with 4 cyl,
black maj
- Re: Convert 6 cyl tacho for use with 4 cyl,
Shawn Lin
- Re: Convert 6 cyl tacho for use with 4 cyl,
black maj
- Re: Convert 6 cyl tacho for use with 4 cyl,
Shawn Lin
- Re: Convert 6 cyl tacho for use with 4 cyl,
Peter D. Hipson
- Re: Convert 6 cyl tacho for use with 4 cyl,
Andy Whittaker - Chester UK
- RE: Convert 6 cyl tacho for use with 4 cyl,
Scott Feaver
- Re: Convert 6 cyl tacho for use with 4 cyl,
Ludis Langens
- Re: Convert 6 cyl tacho for use with 4 cyl,
TK
- Re: Convert 6 cyl tacho for use with 4 cyl,
Peter Gargano
- Re: Apologies,
Peter Gargano
- request for ecu.files,
dkubus
- PD: request for ecu.files,
dkubus
- Simulator error??,
Shannen Durphey
- DataStream Definition,
Andy Whittaker - Chester UK
- re; p&h injector driver,
KasaRyan
- Is this a good deal?,
Bob Valentine
- <Possible follow-ups>
- Re: Is this a good deal?,
nacelp
- Is this a good deal?,
Dave Williams
- Re: Is this a good deal?,
Squash
- Re: Is this a good deal?,
JTesta1966
- Re: Is this a good deal?,
Squash
- Re: Is this a good deal?,
KasaRyan
- Re: Is this a good deal?,
Matt S Bower
- Re: Is this a good deal?,
Greg Hermann
- RE: Is this a good deal?,
Mike Rolica
- Re: Is this a good deal?,
nacelp
- Re: Is this a good deal?,
nacelp
- tbi size,
KasaRyan
- ecu files,
dkubus
- Re: Injectors: P&H and SAT - Part 1,
Swayze
- Injectors: P&H and SAT - Part 2,
Garfield Willis
- Injectors: P&H and SAT - Part 3,
Garfield Willis
- Re: Injectors: P&H and SAT - Part 4,
Len sabatine
- Need help understanding Fuel tables.,
Kevin Reynolds
- '87 Vette .bin needed,
NickG
- New Member to List: Heads-Up Display Q's,
Dan Gentry
- Re: Injector driver,
KasaRyan
- Im going CRAZY, WOT tuning is being a bastard! Running out offuel,
olbap
- <Possible follow-ups>
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel,
olbap
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel,
Ernst denBroeder
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel,
Len sabatine
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel,
Len sabatine
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel,
Len sabatine
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel,
Len sabatine
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel,
ECMnut
- RE: Heads up display,
Dave Hempstead
- <Possible follow-ups>
- Re: Heads up display,
Dan Gentry
- Re: Heads up display,
Dan Gentry
- Re: Heads up display,
Kelly Parker
- Re: Heads up display,
Dan Gentry
- Re: Heads up display,
Kelly Parker
- Re: Heads up display,
Ken Kelly
- Re: Heads up display,
Dan Gentry
- Re: Heads up display,
TK
- Re: Heads up display,
TK
- RE: Heads up display,
Mike Rolica
- Re: Heads up display,
Dan Gentry
- Re: Heads up display,
JTesta1966
- Re: Heads up display,
Ken Kelly
- Re: Heads up display,
alexpeper
- Re: Heads up display,
Ludis Langens
- Chip ID,
Todd Burkard
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel,
olbap
- RE: Im going CRAZY, WOT tuning is being a bastard! Running outoff uel,
Mike Rolica
- Re: Underhood Temperatures,
Swayze
- Re: Im going CRAZY, WOT tuning is being a bastard! Running outoffuel,
Gabe
- RE: Im going CRAZY, WOT tuning is being a bastard! Running outoffuel,
olbap
- RE: Im going CRAZY, WOT tuning is being a bastard! Runningoutoffu el,
Mike Rolica
- RE: Im going CRAZY, WOT tuning is being a bastard! Runningoutoffuel,
olbap
- Re: P&H Injector Interface - the "Package"?,
Swayze
- RE: Im going CRAZY, WOT tuning is being a bastard! Running outoffuel,
olbap
- fuel pump info,
steve ravet
- Fuel, Fuel, Fuel... why dont I have enough,
olbap
- Another VSS question,
John D. Bachman
- Got some new injectors! Best way to rescale?>,
olbap
- Let me clarify on my last injector post,
olbap
- [Fwd: DIY_EFI_WWW],
steve ravet
- cts,
Omer N Ozkul
- Bigger injectors didnt fix it :(,
olbap
- GM Trip Computer,
Scott Feaver
- Re: cts mounting -,
KasaRyan
- '165 switching both fans from the ECM?,
Kevin Crain
- <Possible follow-ups>
- Re: '165 switching both fans from the ECM?,
Shannen Durphey
- Re: '165 switching both fans from the ECM?,
Kevin Crain
- Re: '165 switching both fans from the ECM?,
Jim Wilson
- Re: '165 switching both fans from the ECM?,
Shannen Durphey
- Re: '165 switching both fans from the ECM?,
Kevin Crain
- Re: '165 switching both fans from the ECM?,
Shannen Durphey
- Re: '165 switching both fans from the ECM?,
Kevin Crain
- Re: '165 switching both fans from the ECM?,
Kevin Crain
- Re: '165 switching both fans from the ECM?,
Kevin Crain
- Re: '165 switching both fans from the ECM?,
Kevin Crain
- Re: '165 switching both fans from the ECM?,
David C. Allen
- Re: '165 switching both fans from the ECM?,
Kevin Crain
- Re: '165 switching both fans from the ECM?,
Peter Gargano
- Re: '165 switching both fans from the ECM?,
Bruce Plecan
- Re: '165 switching both fans from the ECM?,
Shannen Durphey
- Re: '165 switching both fans from the ECM?,
Peter Gargano
- Re: '165 switching both fans from the ECM?,
Shannen Durphey
- re;re;P&H injector interface,
Swayze
- Re: alfa turbo using gm,
Peter Gargano
- Re: P&H Injector Interface - Wiring Approach,
Walter Sherwin
- Re: EGT,
Bruce Plecan
- Re: Bigger injectors didnt fix it / injector sizing,
KasaRyan
- Intro,
Oliver Scholz
- Stumped at CSH, HQ,
Bruce Plecan
- <Possible follow-ups>
- Re: Stumped at CSH, HQ,
Bob Valentine
- Re: Stumped at CSH, HQ,
JTesta1966
- Re: Stumped at CSH, HQ,
JTesta1966
- Re: Stumped at CSH, HQ,
Len sabatine
- Re: Stumped at CSH, HQ,
Dave Zug
- RE: Stumped at CSH, HQ,
Mike Rolica
- Re: Stumped at CSH, HQ,
Eric Clark
- Another Intro,
D. Barry Stubbs
- UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850,
olbap
- RE: VSS Questions,
John D. Bachman
- Low O2 readings in Diacom at WOT.... please help!,
Craig Marcho
- 749 for sale,
cwagner
- When to swap injectors,
trax
- Re: UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850,
Kevin Reynolds
- Two barrel TBI must have a flaw, I give up.,
olbap
- <Possible follow-ups>
- Re: Two barrel TBI must have a flaw, I give up.,
Bruce Plecan
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
rr
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
D. Barry Stubbs
- Re: Two barrel TBI must have a flaw, I give up.,
Bruce Plecan
- Re: Two barrel TBI must have a flaw, I give up.,
Scot Sealander
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
Bruce Plecan
- Re: Two barrel TBI must have a flaw, I give up.,
Bob Valentine
- Re: Two barrel TBI must have a flaw, I give up.,
rr
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
Gregory A. Parmer
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
Len Sabatine
- Re: Two barrel TBI must have a flaw, I give up.,
Bruce Plecan
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
Bruce Plecan
- Re: Two barrel TBI must have a flaw, I give up.,
rr
- Re: Two barrel TBI must have a flaw, I give up.,
rr
- Re: Two barrel TBI must have a flaw, I give up.,
Shannen Durphey
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
Bruce Plecan
- Re: Two barrel TBI must have a flaw, I give up.,
Bruce Plecan
- Re: Two barrel TBI must have a flaw, I give up.,
Dave Williams
- Re: Two barrel TBI must have a flaw, I give up.,
MdntRdr1
- Re: Two barrel TBI must have a flaw, I give up.,
Bruce Plecan
- Re: Two barrel TBI must have a flaw, I give up.,
Bruce Plecan
- Re: Two barrel TBI must have a flaw, I give up.,
Len Sabatine
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
Bruce Plecan
- Re: Two barrel TBI must have a flaw, I give up.,
Gregory A. Parmer
- RE: Two barrel TBI must have a flaw, I give up.,
Mark M. Pikas
- Re: Two barrel TBI must have a flaw, I give up.,
Bruce Plecan
- RE: Two barrel TBI must have a flaw, I give up.,
Mark M. Pikas
- RE: Two barrel TBI must have a flaw, I give up.,
black maj
- Re: UPDATE, Swapped to carb to rule out ignition.. and pseudo-intro..,
Tedscj
- Re: UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850,
olbap
- Re: UPDATE, Swapped to carb to rule out ignition.. and pseudo-intro..,
olbap
- Fuel Trim Cell 18???,
Jody Shapiro
- Knock sensor woes,
D Kunnath
- Subject: Re: UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850,
Marvin Johnson
- RE: UPDATE, Swapped to carb to rule out ignition.. and pseudo-int ro..,
Marteney, Steven J.
- Re: Two barrel TBI must have a flaw, I give up,
Ernst denBroeder
- Injector Duty Cycle,
trax
- Re: GMECM Digest V2 #245,
Mikepoore
- Injector flow,
cwagner
- References for Bosch Injection system and Direct injection system,
SiregarAbdi
- References of Direct and indirect injection system for gasoline and diesel engine,
SiregarAbdi
- Heat crazed mad scientist,
Kelly Parker
- <Possible follow-ups>
- Re: Heat crazed mad scientist,
Andrew K. Mattei
- Re: Heat crazed mad scientist,
Bruce Plecan
- Re: Heat crazed mad scientist,
Kelly Parker
- Re: Heat crazed mad scientist,
Dave Zug
- Re: Heat crazed mad scientist,
Dave Zug
- Re: Heat crazed mad scientist,
Dave Zug
- Re: Heat crazed mad scientist,
SPECTRO COATING CORP.
- Re: Heat crazed mad scientist,
Kelly Parker
- Re: Heat crazed mad scientist,
Programmer
- Re: Heat crazed mad scientist,
Bruce Plecan
- Re: Heat crazed mad scientist,
Kelly Parker
- Re: Heat crazed mad scientist,
Bruce Plecan
- Re: Heat crazed mad scientist,
Kelly Parker
- Re: Heat crazed mad scientist,
Shannen Durphey
- RE: Heat crazed mad scientist,
Marteney, Steven J.
- RE: Heat crazed mad scientist,
Mark M. Pikas
- RE: Heat crazed mad scientist,
Marteney, Steven J.
- RE: Heat crazed mad scientist,
John_Calabrese
- RE: Heat crazed mad scientist,
Mike Rolica
- Re: Heat crazed mad scientist,
Gabe
- Re: Heat crazed mad scientist,
Bruce Plecan
- Re: Heat crazed mad scientist,
Kelly Parker
- RE: Heat crazed mad scientist,
John_Calabrese
- Re: Heat crazed mad scientist,
Bruce Plecan
- RE: Heat crazed mad scientist,
Mike Rolica
- Re: Heat crazed mad scientist,
Len Sabatine
- Re: Heat crazed mad scientist,
John_Calabrese
- Re: Heat crazed mad scientist,
Bruce Plecan
- Re: Heat crazed mad scientist,
Bruce Plecan
- Re: Heat crazed mad scientist,
Bruce Plecan
- Re: Heat crazed mad scientist,
Dave Zug
- Re: Heat crazed mad scientist,
Dave Zug
- Re: Heat crazed mad scientist,
alexpeper
- Injector Duty Cycle ... have data ... need advice,
TRAX
- mopar conversion.mpfi using gmecm,
Mike Rolica
- IAT range,
Marc Ethier
- <Possible follow-ups>
- Re: IAT range,
Bruce Plecan
- Re: IAT range,
Swayze
- Re: IAT range,
Bruce Plecan
- Re: IAT range,
General Motors
- Re: IAT range,
Marc Ethier
- Re: IAT range,
Bruce Plecan
- Re: IAT range,
Andrew K. Mattei
- Re: IAT range,
Len Sabatine
- Re: IAT range,
D. Barry Stubbs
- Re: IAT range,
Len Sabatine
- Re: IAT range,
Bruce Plecan
- Re: IAT range,
Bruce Plecan
- Re: IAT range,
Bruce Plecan
- Re: IAT range,
Marc Ethier
- Re: IAT range,
Bruce Plecan
- Re: IAT range,
Sean879
- Re: IAT range,
Marc Ethier
- Re: IAT range,
Bruce Plecan
- Re: IAT range,
Sean879
- Re: IAT range,
black maj
- Re: IAT range,
Jeff M
- That a joke,
Bruce Plecan
- 1998 4L60E & ECM,
lpwcruzr
- Fw: gas,
Bruce Plecan
- gas Grumpy rant,
Bruce Plecan
- <Possible follow-ups>
- Re: gas Grumpy rant,
MdntRdr1
- Re: gas Grumpy rant,
MdntRdr1
- Re: gas Grumpy rant,
Bruce Plecan
- Re: gas Grumpy rant,
TK
- Re: gas Grumpy rant,
Bruce Plecan
- Re: gas Grumpy rant,
MdntRdr1
- Re: gas Grumpy rant,
TK
- Re: gas Grumpy rant,
Shannen Durphey
- Re: gas Grumpy rant,
Bruce Plecan
- Re: gas Grumpy rant,
MdntRdr1
- Re: gas Grumpy rant,
Aaron G Kallotte
- Re: gas Grumpy rant,
Bruce Plecan
- Re: gas Grumpy rant,
Dave Zug
- Re: gas Grumpy rant,
MdntRdr1
- RE: gas Grumpy rant,
Mike Rolica
- 4.6L Ford MAF was Re: Heat crazed mad scientist,
sswayze
- <Possible follow-ups>
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist,
Bruce Plecan
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist,
Programmer
- RE: 4.6L Ford MAF was Re: Heat crazed mad scientist,
Mike Rolica
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist,
Mike Wesley
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist,
Bruce Plecan
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist,
Mike Wesley
- RE: 4.6L Ford MAF was Re: Heat crazed mad scientist,
Mike Rolica
- RE: 4.6L Ford MAF was Re: Heat crazed mad scientist,
Mike Rolica
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist,
NickG
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist,
Mike Wesley
- RE: 4.6L Ford MAF was Re: Heat crazed mad scientist,
Mike Rolica
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist,
Programmer
- RE: 4.6L Ford MAF was Re: Heat crazed mad scientist,
Mike Rolica
- Mefi, Mefi, Mefi....,
Shannen Durphey
- Good Weekend,
Bruce Plecan
- <Possible follow-ups>
- Re: Good Weekend,
Aaron Willis
- Re: Good Weekend,
Doug Dayson
- Re: Good Weekend,
Bruce Plecan
- Re: Good Weekend,
Doug Dayson
- Re: Good Weekend,
Bruce Plecan
- Re: Good Weekend,
Doug Dayson
- Re: Good Weekend,
Bruce Plecan
- Re: Good Weekend,
Bruce Plecan
- Re: Good Weekend,
Aaron Willis
- RE: Good Weekend,
Marteney, Steven J.
- Someone was using CATS stuff?,
Marteney, Steven J.
- 1997 Chev Chip Advice,
Jeffrey Scott
- Electric Vehicle bragging (was Re: Heat...),
Steven Ciciora
- Cruise control and 92EFI,
Vinnie Moscaritolo
- Re: wooden spacers,
Hotrodderzzz
- <Possible follow-ups>
- Re: wooden spacers,
Bruce Plecan
- Re: wooden spacers,
Hotrodderzzz
- Re: wooden spacers,
steve ravet
- Re: wooden spacers,
Peter D. Hipson
- Re: wooden spacers,
Bruce Plecan
- Re: wooden spacers,
Aaron Willis
- RE: wooden spacers,
Mark M. Pikas
- RE: wooden spacers,
Aaron Willis
- Re: wooden spacers,
MdntRdr1
- Re: wooden spacers,
steve ravet
- RE: wooden spacers,
Mark M. Pikas
- Re: wooden spacers,
Swayze
- Rev Limiter on '87 Corvette,
Aaron G Kallotte
- <Possible follow-ups>
- Re: Rev Limiter on '87 Corvette,
TK
- Re: Rev Limiter on '87 Corvette,
Dave Zug
- Re: Rev Limiter on '87 Corvette,
Jeremy Gonyou
- Re: Rev Limiter on '87 Corvette,
Roger Heflin
- Re: Rev Limiter on '87 Corvette,
Bruce Plecan
- RE: Rev Limiter on '87 Corvette,
Mike Rolica
- RE: Rev Limiter on '87 Corvette,
Mike Rolica
- RE: Rev Limiter on '87 Corvette,
Marteney, Steven J.
- Re: Rev Limiter on '87 Corvette,
Aaron G Kallotte
- RE: Rev Limiter on '87 Corvette,
Jeremy Gonyou
- RE: Rev Limiter on '87 Corvette,
Mike Rolica
- RE: Rev Limiter on '87 Corvette,
Jeremy Gonyou
- Mad scientist VS. The info highway,
Kelly Parker
- MAP Sensor Pinouts,
Berg Family
- Re: 4.6L Ford MAF,
Garfield Willis
- tpi intakes,
Mike Rolica
- <Possible follow-ups>
- Re: tpi intakes,
Bruce Plecan
- RE: tpi intakes,
Timothy Siford
- FW: tpi intakes,
trax
- RE: tpi intakes,
Mark M. Pikas
- RE: tpi intakes,
Marteney, Steven J.
- RE: tpi intakes,
Mark M. Pikas
- Re: tpi intakes,
Bruce Plecan
- Re: tpi intakes,
Bruce Plecan
- RE: tpi intakes,
trax
- RE: tpi intakes,
J. T. Spilman
- PASSlock system bypass?,
lpwcruzr
- 1998 O2 sensor,
lpwcruzr
- <Possible follow-ups>
- Re: 1998 O2 sensor,
Bruce Plecan
- Re: 1998 O2 sensor,
Eric Clark
- Re: 1998 O2 sensor,
lpwcruzr
- RE: 1998 O2 sensor,
Mark M. Pikas
- Re: 1998 O2 sensor,
Garfield Willis
- RE: 1998 O2 sensor,
Mark M. Pikas
- Re: 1998 O2 sensor,
Garfield Willis
- Re: 1998 O2 sensor,
Len Sabatine
- Re: 1998 O2 sensor,
Garfield Willis
- Re: 1998 O2 sensor,
lpwcruzr
- Re: 1998 O2 sensor,
Len Sabatine
- Re: 1998 O2 sensor,
Garfield Willis
- Re: 1998 O2 sensor,
David Cooley
- Re: 1998 O2 sensor,
Garfield Willis
- Re: 1998 O2 sensor,
alexpeper
- Re: 1998 O2 sensor,
David Cooley
- Microsoft Outlook 8.5 PROBLEMS,
Orin
- [Admin] Plain Text Main only please,
Orin
- AFDY/6022 .bin in incoming,
Shannen Durphey
- '84 Corvette .bin and/or ecu file needed,
Craig Marcho
- Pump Shot,
trax
- Ford New mailing list,
Bruce Plecan
- 730 4 cyl wiring ?,
Bruce Plecan
- checksum error last byte,
Kelly Parker
- Re: checksum error part two,
Kelly Parker
- [Admin] Someone has return-receipt on,
Orin
- Re: ODBD II ECM's in older cars?,
Bruce Plecan
- Delco chip 16172718?,
Daniel Henriksson
- 727 ECU limits,
Dave Williams
- <Possible follow-ups>
- Re: 727 ECU limits,
ECMnut
- Re: 727 ECU limits,
Bruce Plecan
- Re: 727 ECU limits,
Bruce Plecan
- Re: 727 ECU limits,
KasaRyan
- Re: 727 ECU limits,
Ludis Langens
- Re: 727 ECU limits,
Dave Williams
- Re: 727 ECU limits,
Dave Williams
- Re: 727 ECU limits,
Dave Williams
- Re: 727 ECU limits,
Dave Williams
- Re: 727 ECU limits,
Bruce Plecan
- Re: 727 ECU limits,
Bruce Plecan
- Re: 727 ECU limits,
ECMnut
- Re: 727 ECU limits,
Dave Williams
- Re: 727 ECU limits,
Dave Williams
- Re: 727 ECU limits,
Ludis Langens
- Re: 727 ECU limits,
Dave Williams
- Re: 727 ECU limits,
Swayze
- Re: 727 ECU limits,
Bruce Plecan
- Re: 727 ECU limits,
rr
- Re: krazy ed,
KasaRyan
- Odp: Lambda sensors - Where, Why and how Much ?,
Marek Skrzypiec
- Re: Pump Shot, now SU, no GMECM,
Aaron Willis
- Memcal needed,
Dan Kunnath
- <Possible follow-ups>
- Re: Memcal needed,
Bruce Plecan
- Memcal needed,
Tedscj
- Re: Memcal needed,
Shannen Durphey
- Re: Memcal needed,
Bruce Plecan
- Re: Memcal needed,
Tedscj
- Re: Memcal needed,
Chipsbyal
- Re: Memcal needed,
David Posea
- Re: Memcal needed,
Bruce Plecan
- Re: Memcal needed,
Daniel E. Griffin
- Re: Memcal needed,
Len Sabatine
- ecm disassembly,
cwagner
- turbo seca - maf>turbo,
KasaRyan
- <Possible follow-ups>
- Re: turbo seca - maf>turbo,
Bruce Plecan
- Re: turbo seca - maf>turbo,
David Cooley
- Re: turbo seca - maf>turbo,
Bruce Plecan
- Re: turbo seca - maf>turbo,
Peter D. Hipson
- Re: turbo seca - maf>turbo,
Bruce Plecan
- Re: turbo seca - maf>turbo,
JTesta1966
- Re: turbo seca - maf>turbo,
JTesta1966
- Re: turbo seca - maf>turbo,
Bruce Plecan
- Re: turbo seca - maf>turbo,
David Cooley
- Re: turbo seca - maf>turbo,
David Cooley
- maf temps,
KasaRyan
- Re: Memcal needed "got one",
Chipsbyal
- .bin request,
D. Barry Stubbs
- List - up?,
Bruce Plecan
- Can a header collector leak make the o2 readings innacurate?,
olbap
- Re: Can a header collector leak make the o2 readings innacurate?,
Len Sabatine
- Non EFI..Organ transplants..giving blood,
Mike Rolica
- Idle Block Learn Cell ??,
Squash
- PCM and Trannies,
Bruce Plecan
- Min Cool for Closed Loop Fuel,
trax
- Min Cool for CLF ...,
trax
- '747 FL1&2 .ecu entries,
rr
- Somewhat off topic: WTB: Old Laptop,
D. Barry Stubbs
- ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??],
Michael Davis
- Re: Somewhat off topic: WTB: Old Laptop,
Jeremy Gonyou
- maf systems..,
Mike Rolica
- Mustang stuff for sale/trade,
steve ravet
- Re: Can a header collector leak make the o2 readings innacurate? - YES!,
KasaRyan
- General tuning question - fuel economy,
Marteney, Steven J.
- <Possible follow-ups>
- Re: General tuning question - fuel economy,
JTesta1966
- RE: General tuning question - fuel economy,
Mike Rolica
- RE: General tuning question - fuel economy,
Marteney, Steven J.
- Re: General tuning question - fuel economy,
Squash
- Re: General tuning question - fuel economy,
Bruce Plecan
- Re: General tuning question - fuel economy,
Bruce Plecan
- Re: General tuning question - fuel economy,
Romans, Mark
- Re: General tuning question - fuel economy,
Bruce Plecan
- RE: General tuning question - fuel economy,
Craig Marcho
- Re: General tuning question - fuel economy,
Marc Randolph
- RE: General tuning question - fuel economy,
Marteney, Steven J.
- RE: General tuning question - fuel economy,
Marteney, Steven J.
- Re: General tuning question - fuel economy,
Romans, Mark
- Re: General tuning question - fuel economy,
Bruce Plecan
- RE: General tuning question - fuel economy,
Marteney, Steven J.
- Re: General tuning question - fuel economy,
Romans, Mark
- BPW and Cylinder Vol.?,
Squash
- <Possible follow-ups>
- Re: BPW and Cylinder Vol.?,
rr
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
Bruce Plecan
- Re: BPW and Cylinder Vol.?,
Jeff M
- Re: BPW and Cylinder Vol.?,
Roger Heflin
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
rrauscher
- Re: BPW and Cylinder Vol.?,
Bruce Plecan
- Re: BPW and Cylinder Vol.?,
rrauscher
- Re: BPW and Cylinder Vol.?,
Scot Sealander
- RE: BPW and Cylinder Vol.?,
Mike Rolica
- Re: BPW and Cylinder Vol.?,
Scot Sealander
- Re: BPW and Cylinder Vol.?,
rr
- Re: BPW and Cylinder Vol.?,
Ludis Langens
- RE: BPW and Cylinder Vol.?,
Pat Ford
- Re: BPW and Cylinder Vol.?,
Pat Ford
- RE: BPW and Cylinder Vol.?,
Mike Rolica
- RE: BPW and Cylinder Vol.?,
Pat Ford
- RE: BPW and Cylinder Vol.?,
Steven Ciciora
- Re: BPW and Cylinder Vol.?,
Ludis Langens
- Re: BPW and Cylinder Vol.?,
Shannen Durphey
- Re: BPW and Cylinder Vol.?,
Romans, Mark
- Re: BPW and Cylinder Vol.?,
Shannen Durphey
- Re: BPW and Cylinder Vol.?,
Romans, Mark
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
rrauscher
- Re: BPW and Cylinder Vol.?,
Bruce Plecan
- Re: BPW and Cylinder Vol.?,
rr
- Re: BPW and Cylinder Vol.?,
Garfield Willis
- Re: BPW and Cylinder Vol.?,
Shannen Durphey
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
Roger Heflin
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
Bruce Plecan
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
Bruce Plecan
- Re: BPW and Cylinder Vol.?,
Roger Heflin
- Re: BPW and Cylinder Vol.?,
Bruce Plecan
- Re: BPW and Cylinder Vol.?,
Bruce Plecan
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
rrauscher
- Re: BPW and Cylinder Vol.?,
Squash
- lb/hr calculation,
trax
- Wide Band Oxygen Sensor - Request For Comments(Updated June 14 2000),
Paul
- Fw: Kalmaker software,
Bruce Plecan
- Wide Range OX sensor,
bcroe
- Any other GM comms speeds?,
Ross Myers
- <Possible follow-ups>
- RE: Any other GM comms speeds?,
Malcolm Robb, LC 0112G
- Re: Any other GM comms speeds?,
Andy Whittaker - Chester UK
- Re: Any other GM comms speeds?,
alexpeper
- RE: Any other GM comms speeds?,
Malcolm Robb, LC 0112G
- RE: Any other GM comms speeds?,
Malcolm Robb, LC 0112G
- Re: Any other GM comms speeds?,
Ross Myers
- RE: Any other GM comms speeds?,
Malcolm Robb, LC 0112G
- Re: Any other GM comms speeds?,
Ross Myers
- Bosch (Leaded Fuel) 4 wire oxygen sensor PB-11,
Paul
- lb/hr calculation in ERROR (TunerCat vs. WinBin),
trax
- <Possible follow-ups>
- Re: lb/hr calculation in ERROR (TunerCat vs. WinBin),
Michael Davis
- Re: lb/hr calculation in ERROR (TunerCat vs. WinBin),
Squash
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin),
trax
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin),
Mike Rolica
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin),
Eric Aos
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin),
Mike Rolica
- Re: lb/hr calculation in ERROR (TunerCat vs. WinBin),
Michael Davis
- Re: lb/hr calculation in ERROR (TunerCat vs. WinBin),
rrauscher
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin),
trax
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin),
Mike Rolica
- Re: lb/hr calculation in ERROR (TunerCat vs. WinBin),
rr
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin),
cwagner
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin),
cwagner
- Can an ECM "learn" how to start the car better?,
Marteney, Steven J.
- <Possible follow-ups>
- Re: Can an ECM "learn" how to start the car better?,
JTesta1966
- Re: Can an ECM "learn" how to start the car better?,
Bruce Plecan
- RE: Can an ECM "learn" how to start the car better?,
trax
- RE: Can an ECM "learn" how to start the car better?,
Roger Heflin
- RE: Can an ECM "learn" how to start the car better?,
trax
- Re: Can an ECM "learn" how to start the car better?,
JTesta1966
- Re: Can an ECM "learn" how to start the car better?,
Len Sabatine
- RE: Can an ECM "learn" how to start the car better?,
Roger Heflin
- Re: Can an ECM "learn" how to start the car better?,
Bruce Plecan
- RE: Can an ECM "learn" how to start the car better?,
Len Sabatine
- RE: Can an ECM "learn" how to start the car better?,
trax
- RE: Can an ECM "learn" how to start the car better?,
Squash
- Re: Can an ECM "learn" how to start the car better?,
JTesta1966
- 165 puzzling me again...,
Mike Rolica
- EGT gauges,
Roger Heflin
- winbin,
Mike Rolica
- BIG WinBin vs TunerCat discrepencies,
trax
- <Possible follow-ups>
- RE: BIG WinBin vs TunerCat discrepencies,
Eric Aos
- RE: BIG WinBin vs TunerCat discrepencies,
Mike Rolica
- RE: BIG WinBin vs TunerCat discrepencies,
Squash
- Re: BIG WinBin vs TunerCat discrepencies,
Programmer
- Re: BIG WinBin vs TunerCat discrepencies,
Swayze
- Re: BIG WinBin vs TunerCat discrepencies,
Squash
- Re: BIG WinBin vs TunerCat discrepencies,
Pat Ford
- Re: BIG WinBin vs TunerCat discrepencies,
Bruce Plecan
- RE: BIG WinBin vs TunerCat discrepencies,
Mike Rolica
- Re: BIG WinBin vs TunerCat discrepencies,
Bruce Plecan
- Spark Advance discrepency somewhat figured out,
trax
- off topic question?,
Dave Evans
- ALDL <--> PC interface,
D. Barry Stubbs
- Another .bin request,
D. Barry Stubbs
- WinBin vs TunerCat ... VE (fuel tables) ... Eric ...,
trax
- Diacom frame save?,
Squash
- Ludis, can I get info on your debug board,
Pat Ford
- Changing 165 fuel delivery was "General tuning question - fuel ec onomy",
Marteney, Steven J.
- Re: Changing 165 fuel delivery was "General tuning question - fuel economy",
Rick Lindstedt
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Marteney, Steven J.
- <Possible follow-ups>
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Mike Rolica
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Marteney, Steven J.
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Mike Rolica
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Mike Rolica
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Marteney, Steven J.
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Marteney, Steven J.
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Mike Rolica
- ECM part numbers?,
steve ravet
- <Possible follow-ups>
- Re: ECM part numbers?,
Bruce Plecan
- RE: ECM part numbers?,
Mike Rolica
- RE: ECM part numbers?,
Mike Rolica
- Re: ECM part numbers?,
Ludis Langens
- Re: ECM part numbers?,
steve ravet
- Re: ECM part numbers?,
Bruce Plecan
- Re: ECM part numbers?,
ECMnut
- Re: ECM part numbers?,
Keith
- Re: ECM part numbers?,
Ludis Langens
- Re: ECM part numbers?,
D. Barry Stubbs
- Re: ECM part numbers?,
ECMnut
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Rick Lindstedt
- Vauxhall/Opel Broadcast codes.,
Malcolm Robb, LC 0112G
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Marteney, Steven J.
- RE: Changing 165 fuel delivery was "General tuning question -fuel economy",
Mike Rolica
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Squash
- Re: Changing 165 fuel delivery was "General tuning question -fuel economy",
Bruce Plecan
- Re: Changing 165 fuel delivery was "General tuning question - fuel economy",
Bruce Plecan
- Odp: Any other GM comms speeds?,
Marek
- Honda/NGK O2 sensor part # versus Horiba/NGK O2 sensor part #s,
Jason R. Haines
- Odp: Bosch (Leaded Fuel) 4 wire oxygen sensor PB-11,
Marek
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Squash
- Update,
Kelly Parker
- Changing 165 fuel delivery,
Romans, Mark
- <Possible follow-ups>
- Re: Changing 165 fuel delivery,
Aaron G Kallotte
- Re: Changing 165 fuel delivery,
Bruce Plecan
- RE: Changing 165 fuel delivery,
Mike Rolica
- RE: Changing 165 fuel delivery,
Mike Rolica
- Re: Changing 165 fuel delivery,
Shannen Durphey
- Re: Changing 165 fuel delivery,
Bruce Plecan
- Re: Changing 165 fuel delivery,
Garfield Willis
- Re: Changing 165 fuel delivery,
Garfield Willis
- Re: Changing 165 fuel delivery,
Garfield Willis
- Re: Changing 165 fuel delivery,
Rob Higgins
- 727 RPM limit,
Dave Williams
- 1226870/1227165 conversion,
Jeff Kopp
- <Possible follow-ups>
- Re: 1226870/1227165 conversion,
rr
- Re: 1226870/1227165 conversion,
Romans, Mark
- Re: 1226870/1227165 conversion,
Jim Wilson
- Re: 1226870/1227165 conversion,
Jeff Kopp
- Re: 1226870/1227165 conversion,
Bruce Plecan
- Re: 1226870/1227165 conversion,
Jeff Kopp
- Re: 1226870/1227165 conversion,
Bruce Plecan
- Re: 1226870/1227165 conversion,
Bob Valentine
- Re: 1226870/1227165 conversion,
Jeff Kopp
- Re: 1226870/1227165 conversion,
Romans, Mark
- Re: 1226870/1227165 conversion,
Shannen Durphey
- MAF use and calibration,
NickG
- 730 ECM ..??,
Rick Lindstedt
- Fw: Kalmaker software Long, and boring FWIW,
Bruce Plecan
- factory remanufactured... ?,
Sean879
- Wide Band O2 and tuning,
Bruce Plecan
- EPROM burning,
Dan Plaskett
- AXSH2423 differences,
Malcolm Robb, LC 0112G
- Re: Improper DIY_EFI behaviour-or BS from the sidelines,
Bruce Plecan
- Fuel Filters,
Squash
- Re: Improper DIY_EFI behaviour,
Bruce Plecan
- MAP vs MAF FAQ,
Bruce Plecan
- Re: MAP vs MAF FAQ,
John S. Gwynne
- Re: MAP vs MAF Discussion,
Bruce Plecan
- GARFIELD IS WAY WAY OUT OF LINE RE: EGOR, oxygen sensor, O2 sensor, wide band oxygen sensor,
Paul
- Paul vs Gar, please take off list.,
Shannen Durphey
- Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
olbap
- <Possible follow-ups>
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
KasaRyan
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
Bruce Plecan
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
Bruce Plecan
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
KasaRyan
- RE: Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
Mike Rolica
- RE: Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
olbap
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
KasaRyan
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
olbap
- Re: Truely sad news,
Jason Weir
- <Possible follow-ups>
- Truely sad news,
Bruce Plecan
- Re: Truely sad news,
Kevin Crain
- Re: Truely sad news,
Dave Zug
- RE: Truely sad news,
Carl Summers
- Re: Truely sad news,
Bruce Plecan
- Re: Truely sad news,
rr
- Re: Truely sad news,
Ken Kelly
- Re: Truely sad news,
Shannen Durphey
- Re: Truely sad news,
John S. Gwynne
- RE: Truely sad news,
Mike Rolica
- Re: Truely sad news,
Bruce Plecan
- Enough about Gar,
Bruce Plecan
- You guys don't need to be warned do you?,
Kelly Parker
- Re: Changing 165 / Nother Q,
Dave Zug
- <Possible follow-ups>
- Re: Changing 165 / Nother Q,
Romans, Mark
- Re: Changing 165 / Nother Q,
Bruce Plecan
- RE: Changing 165 / Nother Q,
Mike Rolica
- RE: Changing 165 / Nother Q,
Mike Rolica
- Re: Changing 165 / Nother Q,
Bruce Plecan
- Re: Changing 165 / Nother Q,
Bruce Plecan
- Re: Changing 165 / Nother Q,
Dave Zug
- Re: Changing 165 / Nother Q,
Dave Zug.
- RE: Changing 165 / Nother Q,
Mike Rolica
- Re: Changing 165 / Nother Q,
Bruce Plecan
- Re: Changing 165 / Nother Q,
Bruce Plecan
- Re: Changing 165 / Nother Q,
Shannen Durphey
- Re: Changing 165 / Nother Q,
Bruce Plecan
- Re: Changing 165 / Nother Q,
TRAX
- RE: Changing 165 / Nother Q,
Marteney, Steven J.
- Info on Honda/NTK wide band oxygen sensors,
Paul
- Chrysler ROMs (But EFI!!),
Ross Myers
- Horiba/NTK and ECM/NTK [was Re: Info on Honda/NTK wide band oxygen sensors],
Jason R. Haines
- Talented DIYer EE needed,
Bruce Plecan
- TBI tuning headache,
olbap
- Dwell meter on injectors,
olbap
- microcontrollers slightly more powerful than a pic?,
Roger Heflin
- Vortec FI,
Tedscj
- manifold spacers,
Tedscj
- ECM Selection FAQ,
Bruce Plecan
- Abbrviations General EFI,
Bruce Plecan
- <Possible follow-ups>
- Re: Abbrviations General EFI,
Bruce Plecan
- Re: Abbrviations General EFI,
wdhcrump
- Re: Abbrviations General EFI,
Chipsbyal
- Re: Abbrviations General EFI,
Ludis Langens
- Re:Abbrviations General EFI,
Gerald Pelnar
- RE: Abbrviations General EFI,
Mike Rolica
- Re: Abbrviations General EFI,
JTesta1966
- Re: Abbrviations General EFI,
Scot Sealander
- Re: Abbrviations General EFI,
D. Barry Stubbs
- Re: Abbrviations General EFI,
black maj
- Re: Abbrviations General EFI,
Bruce Plecan
- Re: Abbrviations General EFI,
Bruce Plecan
- Re: Abbrviations General EFI,
black maj
- Re: Abbrviations General EFI,
black maj
- Re: Abbrviations General EFI,
Shannen Durphey
- Re: Abbrviations General EFI,
Gregory A. Parmer
- Re: Abbrviations General EFI,
Gregory A. Parmer
- Re: Abbrviations General EFI,
Dave Williams
- Re: Abbrviations General EFI,
Squash
- 808 Hac,
Bruce Plecan
- EPROM identification,
Jeff Kopp
- big block fi,
Mike
- LS1 Air Mass Meters,
Ross Myers
- Tweaking fueling values.,
Ross Myers
- Re: Vortec FI... pictures,
Shannen Durphey
- Better suited for DIY_EFI??,
Shannen Durphey
- FAQ ideas,
Bruce Plecan
- <Possible follow-ups>
- Re: FAQ ideas,
Shannen Durphey
- FAQ ideas,
Dave Williams
- Re: FAQ ideas,
BBBDLGCON
- Re: FAQ ideas,
Ernst denBroeder
- Re: FAQ ideas,
Doug Dayson
- Re: FAQ ideas,
Ludis Langens
- RE: FAQ ideas,
Mike Rolica
- Re: FAQ ideas,
Dave Williams
- Re: FAQ ideas,
Bob Valentine
- Re: FAQ ideas,
Gregory A. Parmer
- RE: FAQ ideas,
Marteney, Steven J.
- Re: FAQ ideas,
Bruce Plecan
- RE: FAQ ideas,
Mike Rolica
- Web sites,
MdntRdr1
- DANGEROUS PRANK - NO EFI CONTENT,
John_Calabrese
- 165 Startup learning?,
Marteney, Steven J.
- 4 pin HEI interface ( I know it's old hat, Sorry),
Marvin Johnson
- Re: ECM Selection FAQ,
Jeremy Gonyou
- FAQ,
Jeremy Gonyou
- BIN differences,
trax
- <Possible follow-ups>
- Re: BIN differences,
John S. Gwynne
- Re: BIN differences,
Bruce Plecan
- RE: BIN differences,
trax
- Re: BIN differences,
John S. Gwynne
- Re: BIN differences,
Bruce Plecan
- Re: BIN differences,
Dave Zug
- Re: BIN differences,
Ludis Langens
- RE: BIN differences,
Marteney, Steven J.
- RE: BIN differences,
Mike Rolica
- Re: BIN differences,
Dave Zug
- Re: BIN differences (including howell730.bin),
Marc Randolph
- MAX232 chip is...,
Eric Deslauriers
- This year's archives,
Orin
- Re: TPI Conversion?,
Robert Eickhorst
- Re: J & L bodies, was ECM Selection FAQ,
D. Barry Stubbs
- ECM # 16181333,
Peacock, Ken
- Back after needed break...tryna catch up,
Garfield Willis
- 383 TBI,
lpwcruzr
- RE: Changing 165 fuel delivery was "General tuning,
Shannen
- Re: MAF Flowbench (was Changing 165 / Nother Q),
Andrew Mattei
- ? about forced induction,
Aaron G Kallotte
- Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy",
Shannen Durphey
- .bin .ecu info,
black maj
- Dead EPROM programmer,
Ludis Langens
- Re: FAQ ideas and update on TPI 327 project,
Todd Burkard
- Ground Loops (non aviation),
Bruce Plecan
- RE: @#$@#$ Changing 165 fuel delivery was "General tuning questio n - fuel economy",
Marteney, Steven J.
- 1999 GMC 5.3 liter Vortec,
c y k
- Re: 383 TBI -air cleaner size,
KasaRyan
- TBI pressure regulator mod,
Eric Deslauriers
- gm altenators...and efi,
Mike Rolica
- <Possible follow-ups>
- FW: gm altenators...and efi,
Mike Rolica
- Re: gm altenators...and efi,
Matt S Bower
- Re: gm altenators...and efi,
Matt S Bower
- Re: gm altenators...and efi,
Bruce Plecan
- RE: gm altenators...and efi,
Mike Rolica
- Re: gm altenators...and efi,
Bruce Plecan
- Re: gm altenators...and efi,
rr
- RE: gm altenators...and efi,
Mike Rolica
- Re: gm altenators...and efi,
Ernst denBroeder
- Re: gm altenators...and efi,
Jeff M
- RE: gm altenators...and efi,
rrauscher
- Re: gm altenators...and efi,
Ernst denBroeder
- Re: gm altenators...and efi,
Jeff M
- Re: mem-cal question,
Bruce Plecan
- Looking for a 16149396 ECM,
TK
- Basic Stamp 2 / ALDL?,
Dan Gentry
- Fw: SOFTWARE LAWS,
Bruce Plecan
- Re: Knock Sensor Question,
Bruce Plecan
- <Possible follow-ups>
- Re: Knock Sensor Question,
Bruce Plecan
- Re: Knock Sensor Question,
Bruce Plecan
- Re: Knock Sensor Question,
Bruce Plecan
- Knock Sensor Question,
Craig Marcho
- Re: Knock Sensor Question,
Jim Wilson
- Re: Knock Sensor Question,
D Kunnath
- Re: Knock Sensor Question,
Craig Marcho
- RE: Knock Sensor Question,
Craig Marcho
- Re: Knock Sensor Question,
D Kunnath
- Re: Knock Sensor Question,
D Kunnath
- Re: Knock Sensor Question,
Barry Tisdale
- Re: Knock Sensor Question,
Bruce Plecan
- Re: Knock Sensor Question,
Squash
- Re: I tire of bruce plecans childish threats,
Bruce Plecan
- <Possible follow-ups>
- I tire of bruce plecans childish threats,
olbap
- Re: I tire of bruce plecans childish threats,
David Cooley
- Re: I tire of bruce plecans childish threats,
Jeff Kopp
- RE: I tire of bruce plecans childish threats,
Craig Marcho
- Re: I tire of bruce plecans childish threats,
Len Sabatine
- Re: I tire of bruce plecans childish threats,
ECMnut
- Re: I tire of bruce plecans childish threats,
Walter Sherwin
- Re: I tire of bruce plecans childish threats,
DC Smith
- RE: I tire of bruce plecans childish threats,
Mike Rolica
- RE: I tire of bruce plecans childish threats,
Carl Summers
- Re: I tire of bruce plecans childish threats,
Programmer
- How to get the LV8?,
Marteney, Steven J.
- Re: Dead EPROM programmer, and question,
FieroMania
- Heated or not O2 sensor,
lpwcruzr
- <Possible follow-ups>
- RE: Heated or not O2 sensor,
Mike Rolica
- Re: Heated or not O2 sensor,
KasaRyan
- Re: Heated or not O2 sensor,
Shannen Durphey
- Re: Heated or not O2 sensor,
lpwcruzr
- Re: Heated or not O2 sensor,
lpwcruzr
- Re: Heated or not O2 sensor,
Shannen Durphey
- Re: Heated or not O2 sensor,
alexpeper
- Re: Heated or not O2 sensor,
lpwcruzr
- Re: Heated or not O2 sensor,
Bruce Plecan
- RE: Heated or not O2 sensor,
Mike Rolica
- Re: 1999 GMC 5.3 liter Vortec -,
KasaRyan
- IGNORE - TEST,
Eric Deslauriers
- [Fwd: TBI pressure regulator mod],
Eric Deslauriers
- Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- <Possible follow-ups>
- Re: Mods to '85 GM TPI ECM,
Shannen Durphey
- RE: Mods to '85 GM TPI ECM,
Craig Marcho
- Re: Mods to '85 GM TPI ECM,
Chipsbyal
- Re: Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Shannen Durphey
- Re: Mods to '85 GM TPI ECM,
ECMnut
- Re: Mods to '85 GM TPI ECM,
Romans, Mark
- Re: Mods to '85 GM TPI ECM,
Ludis Langens
- Re: Mods to '85 GM TPI ECM,
Bruce Plecan
- Re: Mods to '85 GM TPI ECM,
Bruce Plecan
- Re: Mods to '85 GM TPI ECM,
Bruce Plecan
- Re: Mods to '85 GM TPI ECM,
Bruce Plecan
- RE: Mods to '85 GM TPI ECM,
Mike Rolica
- Re: Mods to '85 GM TPI ECM,
Bruce Plecan
- Re: Mods to '85 GM TPI ECM,
Bruce Plecan
- Re: Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Shannen Durphey
- Re: Mods to '85 GM TPI ECM,
Shannen Durphey
- Re: Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Garfield Willis
- Re: Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Garfield Willis
- Re: Mods to '85 GM TPI ECM,
Romans, Mark
- Re: Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Ludis Langens
- Re: Mods to '85 GM TPI ECM,
Romans, Mark
- Re: Mods to '85 GM TPI ECM,
Bruce Plecan
- RE: Mods to '85 GM TPI ECM,
Mike Rolica
- RE: Mods to '85 GM TPI ECM,
Mike Rolica
- Re: I tire of bruce plecans JUST BE QUITE AND GO AWAY, PLEASE,
Jeff M
- Re: Then ignore it,
Shannen Durphey
- GM Authorized????,
Shannen Durphey
- Just ignore it,
Romans, Mark
- Re: I tire of bruce plecans childish threats- just a clarification,
olbap
- Re: testing O2 sensor,
Bruce Plecan
- Re: Finding TDC (sorry, a bit off topic),
Bruce Plecan
- <Possible follow-ups>
- Re: Finding TDC (sorry, a bit off topic),
Bruce Plecan
- Finding TDC (sorry, a bit off topic),
Steven Ciciora
- RE: Finding TDC (sorry, a bit off topic),
Mike Rolica
- Re: Finding TDC (sorry, a bit off topic),
Chipsbyal
- Re: Finding TDC (sorry, a bit off topic),
black maj
- TBI fuel Pumps,
Bruce Plecan
- Re: I tire of bruce plecan,
Garfield Willis
- Vendors Policies, Joke,
Bruce Plecan
- UBB forum, was Re: I tire,
Ludis Langens
- Interesting,
Bruce Plecan
- Re: How to do 165 to 730,
Bruce Plecan
- <Possible follow-ups>
- How to do 165 to 730,
Aaron G Kallotte
- RE: How to do 165 to 730,
Mike Rolica
- Re: How to do 165 to 730,
Bob Valentine
- Re: How to do 165 to 730,
Jim and Sharon Brady
- RE: How to do 165 to 730,
Mike Rolica
- Re: How to do 165 to 730,
Bruce Plecan
- Re: How to do 165 to 730,
Romans, Mark
- Re: How to do 165 to 730,
Bruce Plecan
- Re: How to do 165 to 730,
Romans, Mark
- Re: How to do 165 to 730,
Shannen Durphey
- Re: How to do 165 to 730,
Shannen Durphey
- Re: How to do 165 to 730,
Bruce Plecan
- Re: How to do 165 to 730,
Romans, Mark
- Re: How to do 165 to 730,
Romans, Mark
- Re: 1999 5.3 liter Vortec V-8,
Bruce Plecan
- <Possible follow-ups>
- Re: 1999 5.3 liter Vortec V-8,
Bruce Plecan
- Re: 1999 5.3 liter Vortec V-8,
Bruce Plecan
- 1999 5.3 liter Vortec V-8,
hi 50
- Re: 1999 5.3 liter Vortec V-8,
Chipsbyal
- Re: 1999 5.3 liter Vortec V-8,
Chipsbyal
- Re: 1999 5.3 liter Vortec V-8,
Len Sabatine
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
Chipsbyal
- Re: 1999 5.3 liter Vortec V-8,
ECMnut
- Re: 1999 5.3 liter Vortec V-8,
Mike
- Re: 1999 5.3 liter Vortec V-8,
Chipsbyal
- Re: 1999 5.3 liter Vortec V-8,
hi 50
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
Chipsbyal
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
Chipsbyal
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
lpwcruzr
- Re: 1999 5.3 liter Vortec V-8,
Romans, Mark
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
Programmer
- Re: 1999 5.3 liter Vortec V-8,
lpwcruzr
- Re: 1999 5.3 liter Vortec V-8,
lpwcruzr
- Re: 1999 5.3 liter Vortec V-8,
alexpeper
- A small victory,
Marteney, Steven J.
- Re: SD (was UBB forum, was Re: I tire,
Andrew Mattei
- GN coil ebay auction,
John_Calabrese
- Archive idea,
Bruce Plecan
- <Possible follow-ups>
- Re: Archive idea,
Bruce Plecan
- Archive idea,
Dave Williams
- Re: Archive idea,
Peter Gargano
- Re: Archive idea,
Bruce Plecan
- Re: Archive idea,
Bruce Plecan
- Re: Archive idea,
Bruce Plecan
- Re: Archive idea,
Kelly Parker
- RE: Archive idea,
Eric Aos
- RE: Archive idea,
Kelly Parker
- Re: Archive idea,
Garfield Willis
- Re: Archive idea,
Kelly Parker
- Re: Archive idea,
Kelly Parker
- Re: Archive idea,
Swayze
- FOR SALE: LPE auction items on ebay,
Jason R. Haines
- eprom programers,
Mike Rolica
- Automotive Circuit Protection - Part 2,
Garfield Willis
- Fuel Pressure Sensor,
Scott Flanagan
- State/Federal Tax - was Re: Scoggin-Dickey,
Peter Gargano
- GM Wiper circuit question,
Vinnie Moscaritolo
- Automotive Circuit Protection - Part 3,
Garfield Willis
- Re: Trials and tribulations,
Bruce Plecan
- 1999 5.3 liter Vortec V-8-B/S,
c y k
- EFI ramblings,
rr
- '151 from a turbo sunbird?,
Tedscj
- Programming 101,
MdntRdr1
- Interesting Diddy,
Bruce Plecan
- Strange ALDL Blather,
Jeremy Gonyou
- Re: FAQ ideas, shifting gears, fuel pump thingy, 1st reply, no efi of signifigance,
Bruce Plecan
- Battery jumping,
Bruce Plecan
- 730 vs 727 Question,
Romans, Mark
- CSH required - Re: Battery jumping,
Peter Gargano
- [ADMIN] Out of order messages,
Orin
- RE: FAQ ideas, shifting gears, fuel pump thingy, 1st reply, no e fi of signifigance,
Marteney, Steven J.
- RE: FAQ ideas, shifting gears, fuel pump thingy, 1st reply, no e fi of signifigance,
Mike Rolica
- TBI SPACER ?,
Todd Burkard
- Benching a '165,
Andrew Mattei
- Duty Cycle and VE ??,
Squash
- Peugots using GM ECUs?,
Peter Gargano
- Miss under pressure....,
Shannen Durphey
- Quick OBD-II question, I think,
Marteney, Steven J.
- <Possible follow-ups>
- Re: Quick OBD-II question, I think,
Andrew Mattei
- Re: Quick OBD-II question, I think,
Len Sabatine
- RE: Quick OBD-II question, I think,
Marteney, Steven J.
- RE: Quick OBD-II question, I think,
Len Sabatine
- Re: Quick OBD-II question, I think,
David Cooley
- TC lockup problems,
TRAX
- <Possible follow-ups>
- Re: TC lockup problems,
Bruce Plecan
- Re: TC lockup problems,
Roger Heflin
- Re: TC lockup problems,
Roger Heflin
- Re: TC lockup problems,
Rick Lindstedt
- Re: TC lockup problems,
Roger Heflin
- RE: TC lockup problems,
Mike Rolica
- RE: TC lockup problems,
TRAX
- Re: TC lockup problems,
Bruce Plecan
- Re: TC lockup problems,
bcroe
- RE: TC lockup problems,
Roger Heflin
- RE: TC lockup problems,
Mike Rolica
- 305 vs. 350 TPI 730 EPROMs,
TRAX
- Re: EGOR Pricing Announcement (Commercial),
Steven Ciciora
- Re: Technical Questions,
Andrew K. Mattei
- 89 memcal chip#'s, the other ones...,
Shannen Durphey
- <Possible follow-ups>
- Re: 89 memcal chip#'s, the other ones...,
Bruce Plecan
- Re: 89 memcal chip#'s, the other ones...,
Ludis Langens
- Re: 89 memcal chip#'s, the other ones...,
Shannen Durphey
- Re: 89 memcal chip#'s, the other ones...,
Wayne Johnson
- Re: 89 memcal chip#'s, the other ones...,
Shannen Durphey
- How to read the anht_hac...,
TRAX
- Closed loop tuning,
rr
- EFIinfo.doc,
Bruce Plecan
- GM Performance EPROMS,
TRAX
- Tailpipe Probing of EGO,
Garfield Willis
- web site help,
Jeffery Green
- Newbie seeking advise,
Niinikoski, Juha
- Seeking an '808 '165 hack,
black maj
- Speed Density ECM,
Eric Norgard
- Anyone know anything about negotiating severance packages?,
Kevin R
- sending ecms,
Bruce Plecan
- intake robbery - was Re: Tailpipe Probing of EGO,
Peter Gargano
- How to send,
Bruce Plecan
- I was invited to, min EFI content,
Bruce Plecan
- Re: TC lockup problems - 305 spark,
KasaRyan
- EBAY tidbit,
Tedscj
- Mystery .bin at incoming,
Shannen Durphey
- Update from CSH, HQ No EFI Why Grumpy,
Bruce Plecan
- AKSN1175,
Shannen Durphey
- 400 RPM Diacom,
Squash
- OFF-LIST: Non-efi question,
Marteney, Steven J.
- <Possible follow-ups>
- RE: OFF-LIST: Non-efi question,
Marteney, Steven J.
- Re: OFF-LIST: Non-efi question,
Jim and Sharon Brady
- Re: OFF-LIST: Non-efi question,
Jim and Sharon Brady
- Re: OFF-LIST: Non-efi question,
Peter Gargano
- Re: OFF-LIST: Non-efi question,
Bruce Plecan
- Re: OFF-LIST: Non-efi question,
Peter Gargano
- Re: OFF-LIST: Non-efi question,
Peter Gargano
- Re: OFF-LIST: Non-efi question,
Ross Myers
- RE: OFF-LIST: Non-efi question,
Mike Rolica
- RE: OFF-LIST: Non-efi question,
Mike Rolica
- Re: OFF-LIST: Non-efi question,
Kevin R
- 749 question -,
Barry Tisdale
- source for bins,
Aaron G Kallotte
- Electric Air Pump wanted,
terry_kelley
- ECM's MAF or MAP,
Jim and Sharon Brady
- 16198267 ID?,
Jon Fedock
- Supercharger: MAF or MAP?,
Jim and Sharon Brady
- VSS question (off topic),
Jeffery Green
- Vortec 8 bolt to 12 bolt conversion,
Brent Obermiller
- Re: larifying info: Vortec 8 bolt to 12 bolt conversion,
Shannen Durphey
- New Definition Update,
Bruce Plecan
- Re: 749 Question,
Dig
- ECM interchangability?,
Daniel Houlton
- Re: ECM interchangability on a DOHC,
TK
- New email...,
David Cooley
- Re: Propane EFI,
Bruce Plecan
- Format of WinBin .ECU file - tutorial/help page?,
Peter Gargano
- Ambidextrous software,
Ludis Langens
- 8192 baud 1227808 project.,
Peter Gargano
- On The Fly Tuning (OTFT) - was Re: 8192 baud 1227808 project.,
Peter Gargano
- ECM for sale..,
Marc Piccioni
- Vortec Problem #2,
Brent Obermiller
- bad .bin on FTP server,
NickG
- Re: On The Fly Tuning (OTFT),
GM injection
- PCM's measuring torque.,
Ross Myers
- Crankshaft sensor,
K.E. Towle
- MAF BLM based tuning,
Dave Zug
- <Possible follow-ups>
- MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
rr
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Dave Zug.
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Shannen Durphey
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Scot Sealander
- Re: MAF BLM based tuning,
Romans, Mark
- Re: MAF BLM based tuning,
Dan Plaskett
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Jim and Sharon Brady
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Romans, Mark
- Re: MAF BLM based tuning,
Romans, Mark
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Jim and Sharon Brady
- Re: MAF BLM based tuning,
Jim and Sharon Brady
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Shannen Durphey
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Dave Zug
- RE: MAF BLM based tuning,
Mike Rolica
- Re: MAF BLM based tuning,
Dave Zug.
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Jim and Sharon Brady
- Re: MAF BLM based tuning,
Jim and Sharon Brady
- Re: MAF BLM based tuning,
Ludis Langens
- Re: MAF BLM based tuning,
Ludis Langens
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Jim and Sharon Brady
- PI closed loop algorithm for 1227747 ECU?,
Scott Lundahl
- <Possible follow-ups>
- Re: PI closed loop algorithm for 1227747 ECU?,
rr
- Re: PI closed loop algorithm for 1227747 ECU?,
Gregory A. Parmer
- Re: PI closed loop algorithm for 1227747 ECU?,
Bruce Plecan
- Re: PI closed loop algorithm for 1227747 ECU?,
Scott Lundahl
- Re: PI closed loop algorithm for 1227747 ECU?,
Bruce Plecan
- Re: PI closed loop algorithm for 1227747 ECU?,
Squash
- Re: PI closed loop algorithm for 1227747 ECU?,
Bruce Plecan
- Re: PI closed loop algorithm for 1227747 ECU?,
Scott Lundahl
- Re: PI closed loop algorithm for 1227747 ECU?,
Bruce Plecan
- Re: PI closed loop algorithm for 1227747 ECU?,
rr
- Re: bad .bins on FTP server,
NickG
- persnickety '747s,
rr
- LS1 Hack?,
Dave & Irina Eicher
- ECM for forced induction,
C. Brooks
- <Possible follow-ups>
- Re: ECM for forced induction,
Shannen Durphey
- RE: ECM for forced induction,
Malcolm Robb, LC 0112G
- Re: ECM for forced induction,
Ludis Langens
- RE: ECM for forced induction,
cbrooks1
- RE: ECM for forced induction,
Jeffrey Scott
- Re: ECM for forced induction,
Bill Shaw
- Re: ECM for forced induction,
Bruce Plecan
- Re: ECM for forced induction,
Jim and Sharon Brady
- Re: ECM for forced induction,
Ludis Langens
- Re: ECM for forced induction,
black maj
- Re: ECM for forced induction,
Jim and Sharon Brady
- Re: ECM for forced induction,
Bruce Plecan
- Re: ECM for forced induction,
Daniel Houlton
- Re: A little vague...ECM for forced induction,
Shannen Durphey
- Broken timing gear,
BBBDLGCON
- '870 to '165 swap.....,
Craig Marcho
- Bench tests needed...,
Shannen Durphey
- GM Efi to Rover 3.5,
Niinikoski, Juha
- FOR SALE: misc. calibration parts and a modified GM ECM on ebay,
Jason R. Haines
- 730 Memcal was... RE: MAF BLM based tuning,
Marteney, Steven J.
- ECM info sought...,
Oliver Scholz
- 165 Main spark table,
Marteney, Steven J.
- Ha, '747 anti-flood,
rr
- 730 Memcal decode,
Davis
- Anyone else interested in Rochester FI??,
Shannen Durphey
- <Possible follow-ups>
- Re: Anyone else interested in Rochester FI??,
Bruce Plecan
- Re: Anyone else interested in Rochester FI??,
Len Sabatine
- Re: Anyone else interested in Rochester FI??,
Doug Dayson
- Re: Anyone else interested in Rochester FI??,
Greg Hermann
- RE: Anyone else interested in Rochester FI??,
Malcolm Robb, LC 0112G
- Re: Anyone else interested in Rochester FI??,
Shannen Durphey
- RE: Anyone else interested in Rochester FI??,
Don . F . Broadus
- Re: Anyone else interested in Rochester FI??,
Bruce Plecan
- Re: Anyone else interested in Rochester FI??,
John Bachman
- Re: Anyone else interested in Rochester FI??,
rr
- Mandatory TC Lockup,
TRAX
- <Possible follow-ups>
- Re: Mandatory TC Lockup,
Roger Heflin
- Re: Mandatory TC Lockup,
TK
- Re: Mandatory TC Lockup,
Shannen Durphey
- Re: Mandatory TC Lockup,
TK
- Re: Mandatory TC Lockup,
TK
- Re: Mandatory TC Lockup,
Bruce Plecan
- Re: Mandatory TC Lockup,
Rick Lindstedt
- Re: Mandatory TC Lockup,
Bruce Plecan
- Re: Mandatory TC Lockup,
Rick Lindstedt
- Re: Mandatory TC Lockup,
Rick Lindstedt
- Re: Mandatory TC Lockup,
Bruce Plecan
- Re: Mandatory TC Lockup,
Rick Lindstedt
- RE: Mandatory TC Lockup,
TRAX
- Re: Mandatory TC Lockup,
Bruce Plecan
- Re: Mandatory TC Lockup,
Bruce Plecan
- Re: Mandatory TC Lockup,
steve ravet
- Inverted flight EFI?,
ECMnut
- Thanks for the help,
K.E. Towle
- puzzled by almighty memcal.,
Mike Rolica
- engine control unit,
Don . F . Broadus
- O2 Inte delays,
Bruce Plecan
- new bins uploaded,
steve ravet
- BDJS Bin?,
TK
- Connector Pins for '747 ECU,
Scott Lundahl
- <Possible follow-ups>
- Re: Connector Pins for '747 ECU,
Bruce Plecan
- Re: Connector Pins for '747 ECU,
steve ravet
- Re: Connector Pins for '747 ECU,
Shannen Durphey
- Re: Connector Pins for '747 ECU,
Kevin R
- Re: Connector Pins for '747 ECU,
K.E. Towle
- Re: Connector Pins for '747 ECU,
bcroe
- Re: Connector Pins for '747 ECU,
Bruce Plecan
- Re: Connector Pins for '747 ECU,
Bruce Plecan
- Re: Connector Pins for '747 ECU,
Scott Lundahl
- Re: Connector Pins for '747 ECU,
Bruce Plecan
- VSS ?,
Scott Lundahl
- <Possible follow-ups>
- Re: VSS ?,
Bruce Plecan
- Re: VSS ?,
Bob Valentine
- Re: VSS ?,
Shannen Durphey
- Re: VSS ?,
Bruce Plecan
- VSS ?,
K.E. Towle
- Re: VSS ?,
Bruce Plecan
- Re: VSS ?,
Bob Valentine
- Re: VSS ?,
Shannen Durphey
- RE: VSS ?,
Mike Rolica
- Re: VSS ?,
Sutcliffe, Peter
- LTD1 Emulator,
Bruce Plecan
- Inline VSS,
Bob Valentine
- Delivery failure (shannen@grolen.com),
postmaster
- Re: Power Data Graph - Was Re MAF BLM based tuning,
Bruce Plecan
- LT1 Comp,
Programmer
- Wierd TCC lockup ... can u explain it?,
TRAX
- Anyone with X-fires for sale?,
Kevin R
- Re: Abbreviations General EFI,
D. Barry Stubbs
- Re: pt 2, new bins uploaded,
Shannen Durphey
- Hiway mode spark and fuel ??,
Squash
- Inverted flight EFI? (Grumpy's inna mood),
Bruce Plecan
- Archive utility (was Re: ECM interchangability?),
Daniel Houlton
- Comment on the "Abbreviations" Thread Tizzy,
Garfield Willis
- butterfly whistle, and cure,
Bruce Plecan
- Heads-up,
Bruce Plecan
- Hello,
Rodney Fulk
- CCC Mods,
Bruce Plecan
- Misc pics,,
Bruce Plecan
- LT1 files ?,
Programmer
- <Possible follow-ups>
- Re: LT1 files ?,
Bruce Plecan
- Re: LT1 files ?,
Bruce Plecan
- Re: LT1 files ?,
Programmer
- Re: LT1 files ?,
Shannen Durphey
- Re: LT1 files ?,
Bruce Plecan
- Re: LT1 files ?,
Jim Wilson
- Re: LT1 files ?,
Jim Wilson
- Re: LT1 files ?,
Len Sabatine
- Re: LT1 files ?,
Programmer
- Re: LT1 files ?,
Programmer
- Re: LT1 files ?,
Len Sabatine
- Re: LT1 files ?,
Eric Clark
- Re: LT1 files ?,
Len Sabatine
- BCC ID help...,
FieroMania
- Re: Inverted flight EFI? (Grumpy's inna mood) Fuel temp,
Bruce Plecan
- RE: Archive utility,
Christian Hack
- RE: LT1 files,
Speartech
- EFI POW WOW,
Bruce Plecan
- <Possible follow-ups>
- RE: EFI POW WOW,
Rudi Machilek
- Re: EFI POW WOW,
Jeffrey Scott
- Re: EFI POW WOW,
Bruce Plecan
- RE: EFI POW WOW,
Mike Rolica
- Re: EFI POW WOW,
Bruce Plecan
- EFI POW WOW,
Bruce Plecan
- RE: EFI POW WOW,
Mike Rolica
- RE: EFI POW WOW,
Eric Aos
- Re: EFI POW WOW,
Bruce Plecan
- RE: EFI POW WOW,
Squash
- EFI Pow wow,
Bruce Plecan
- '747 and Proportional Stuff,
rr
- <Possible follow-ups>
- Re: '747 and Proportional Stuff,
Scott Lundahl
- Re: '747 and Proportional Stuff,
rr
- Re: '747 and Proportional Stuff,
Bruce Plecan
- Re: '747 and Proportional Stuff,
Scott Lundahl
- Re: '747 and Proportional Stuff,
Garfield Willis
- Re: '747 and Proportional Stuff,
Garfield Willis
- Re: '747 and Proportional Stuff,
Garfield Willis
- Re: '747 and Proportional Stuff,
rr
- Re: '747 and Proportional Stuff,
rr
- Re: '747 and Proportional Stuff,
Garfield Willis
- GM Injector 17109596 ID,
Bob Valentine
- 1999 5.3 liter Vortec V-8-antitheft,
c y k
- programmers and erasers,
Jim Yeagley
- True definition of Knock,
Bruce Plecan
- <Possible follow-ups>
- Re: True definition of Knock,
Squash
- Re: True definition of Knock,
Bruce Plecan
- RE: True definition of Knock,
Eric Aos
- Re: True definition of Knock,
Squash
- Re: True definition of Knock,
Bruce Plecan
- Re: True definition of Knock,
Squash
- Re: True definition of Knock,
Bruce Plecan
- Re: True definition of Knock,
Dan Plaskett
- RE: True definition of Knock,
Squash
- Re: True definition of Knock,
Dan Plaskett
- Re: True definition of Knock,
Bruce Plecan
- Re: True definition of Knock,
Len Sabatine
- RE: True definition of Knock,
Carl Summers
- RE: True definition of Knock,
Len Sabatine
- Re: True definition of Knock,
Dave Zug
- RE: True definition of Knock,
Carl Summers
- RE: True definition of Knock,
Carl Summers
- RE: True definition of Knock,
Mike Rolica
- Re: True definition of Knock,
Bruce Plecan
- Re: True definition of Knock,
Len Sabatine
- Re: True definition of Knock,
Shannen Durphey
- Buyin Parts,
Bruce Plecan
- Tuning a 727 or 730 with a Supercharger,
Dan Plaskett
- Robbins Nugent chip holders for the 2732,
ECMnut
- <Possible follow-ups>
- Re: Robbins Nugent chip holders for the 2732,
Craig Marcho
- Re: Robbins Nugent chip holders for the 2732,
JTesta1966
- Re: Robbins Nugent chip holders for the 2732,
Programmer
- Re: Robbins Nugent chip holders for the 2732,
Kevin R
- Re: Robbins Nugent chip holders for the 2732,
JTesta1966
- Re: Robbins Nugent chip holders for the 2732,
Mike Dillon
- Re: Robbins Nugent chip holders for the 2732,
JTesta1966
- Re: Robbins Nugent chip holders for the 2732,
Bruce Plecan
- Re: Robbins Nugent chip holders for the 2732,
Craig Marcho
- Re: Robbins Nugent chip holders for the 2732,
JTesta1966
- Re: Robbins Nugent chip holders for the 2732,
Squash
- Re: Robbins Nugent chip holders for the 2732,
Squash
- Re: Robbins Nugent chip holders for the 2732,
Bruce Plecan
- Re: Robbins Nugent chip holders for the 2732,
Shannen Durphey
- Re: Robbins Nugent chip holders for the 2732,
Programmer
- Re: Re: Robbins Nugent chip holders for the 2732,
Mike Dillon
- Re: Robbins Nugent chip holders for the 2732,
ECMnut
- Huntington to Catalina,
Garfield Willis
- Aftermarket Bin dir,
Ross Myers
- Memcal ESC Filter Numbers, was Re: True definition of Knock,
Ludis Langens
- nother car dead..sorta efi...not really gm..ford parts for sale,
Mike Rolica
- <Possible follow-ups>
- Re: nother car dead..sorta efi...not really gm..ford parts for sale,
Bruce Plecan
- Re: nother car dead..sorta efi...not really gm..ford parts for sale,
ECMnut
- Re: nother car dead..sorta efi...not really gm..ford parts for sale,
Programmer
- Re: nother car dead..sorta efi...not really gm..ford parts for sale,
Eric Clark
- Re: nother car dead..sorta efi...not really gm..ford parts for sale,
Bruce Plecan
- Re: nother car dead..sorta efi...not really gm..ford parts for sale,
Eric Clark
- Re: nother car dead..sorta efi...not really gm..ford parts for sale,
Programmer
- Re: nother car dead..sorta efi...not really gm..ford parts for sale,
Bruce Plecan
- Re: nother car dead..sorta efi...not really gm..ford parts for sale,
Shannen Durphey
- Re: nother car dead..sorta efi...not really gm..ford parts for sale,
Gerald Pelnar
- Re: nother car dead..sorta efi...not really gm..ford parts for sale,
Bruce Plecan
- Re: nother car dead..sorta efi...not really gm..ford parts for sale,
Bruce Plecan
- FYI - (or maybe not),
Barry Tisdale
- RE: nother car dead..sorta efi...not really gm..ford parts for sa le,
Mike Rolica
- Engine swap computer & wiring question,
Tim De Coster
- <Possible follow-ups>
- Re: Engine swap computer & wiring question,
steve ravet
- Re: Engine swap computer & wiring question,
Tim De Coster
- Re: Engine swap computer & wiring question,
Bruce Plecan
- Re: Engine swap computer & wiring question,
steve ravet
- Re: Engine swap computer & wiring question,
Tim De Coster
- Re: Engine swap computer & wiring question,
Tim De Coster
- Re: Engine swap computer & wiring question,
Bruce Plecan
- Re: Engine swap computer & wiring question,
alexpeper
- RE: Engine swap computer & wiring question,
Don . F . Broadus
- Re: Engine swap computer & wiring question,
Jeremy Gonyou
- Re: Engine swap computer & wiring question,
Programmer
- Re: Engine swap computer & wiring question,
Jeremy Gonyou
- Re: Engine swap computer & wiring question,
Shawn R. Lin
- Re: Engine swap computer & wiring question,
Ludis Langens
- Re: Engine swap computer & wiring question,
Shannen Durphey
- Re: Engine swap computer & wiring question,
Todd Israels
- Re: Engine swap computer & wiring question,
Tim De Coster
- Re: Engine swap computer & wiring question,
Bruce Plecan
- Re: Engine swap computer & wiring question,
K.E. Towle
- Re: Engine swap computer & wiring question,
Todd Israels
- Re: Engine swap computer & wiring question,
Tim De Coster
- Re: Engine swap computer & wiring question,
Tim De Coster
- Re: Engine swap computer & wiring question,
Tim De Coster
- Re: Engine swap computer & wiring question,
Shannen Durphey
- time delay = degrees,
Don . F . Broadus
- Fwd: RE: Oxygen Sensors,
David Cooley
- TLC,
Bruce Plecan
- Chatting with a 730,
D. Barry Stubbs
- Limited Duration Extra Turbo Boost,
Malcolm Robb, LC 0112G
- Re: diy'er causing a recall,
KasaRyan
- 332 based ecms,
Mike Turner/ENGR/HQ/KEMET/US
- '92 Y-body LT1 bin file needed.,
Craig Marcho
- GM book on TPI/ Gas tank venting on TPI,
Vinnie Moscaritolo
- TCC lower temp,
lpwcruzr
- Re: nother car dead..sorta efi...not really gm..ford parts for sale,
Fran and Bud
- Commercial posting policy,
Orin
- 747 Rom Emulator,
Niinikoski, Juha
- Conditioned reflexes, min EFI,
Bruce Plecan
- need help with '165 in Vette,
NickG
- 89 305 favorite?.,
Bruce Plecan
- Re: 89 305 favorite? Follow up,
Bruce Plecan
- Casting Numbers,
Bruce Plecan
- reading flash chips... was: Re: Looking for a 16149396 ECM,
ECMnut
- prom,
Rich Baxter
- [no subject],
Paul Blackmore
- 16149396 ECM - Yep, how much?,
TK
- Injector sizing for S/C applications,
Bruce Plecan
- Re:,
Rodney Davis
- Accel DFI help maybe?,
J. T. Spilman
- 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Romans, Mark
- <Possible follow-ups>
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Chipsbyal
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Dave Zug
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Shannen Durphey
- RE: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Marteney, Steven J.
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Bruce Plecan
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Michael Davis
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Romans, Mark
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Jim and Sharon Brady
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Romans, Mark
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
TK
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Bruce Plecan
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Bruce Plecan
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Jim and Sharon Brady
- Mode $0a on 7730,
D. Barry Stubbs
- Dizzy to Coil pack,
black maj
- It works,
Todd Burkard
- Lean Cruise.,
Ross Myers
- [no subject],
Pat Ford
- ALDL on 747,
Squash
- Numeric BCCs,
Bruce Plecan
- 427 ecu file?,
KasaRyan
- RE: HT502-Retro-Kit BIN Needed,
Carl Summers
- Buick 3800 ECM's,
Speartech
- Another Newbie Question,
c y k
- aumh bin uploaded,
Bob Valentine
- Saturn stuff,
Gerald Pelnar
- the 9th injector...,
Ernst denBroeder
- <Possible follow-ups>
- RE: the 9th injector...,
Mike Rolica
- RE: the 9th injector...,
Ernst denBroeder
- RE: the 9th injector...,
Squash
- RE: the 9th injector...,
Mike Rolica
- Re: the 9th injector...,
Bruce Plecan
- Re: the 9th injector...,
Ludis Langens
- Re: the 9th injector...,
Pat Ford
- Re: the 9th injector...,
Bruce Plecan
- RE: the 9th injector...,
Mike Rolica
- Re: the 9th injector...,
Pat Ford
- Re: the 9th injector...,
Bruce Plecan
- Re: the 9th injector...,
Ernst denBroeder
- Re: the 9th injector...,
Bruce Plecan
- Re: the 9th injector...,
Pat Ford
- RE: the 9th injector...,
Mike Rolica
- Re: the 9th injector...,
Pat Ford
- RE: the 9th injector...,
Mike Rolica
- Re: the 9th injector...,
Dan Plaskett
- Re: the 9th injector...,
Ernst denBroeder
- RE: the 9th injector...,
Pat Ford
- Re: the 9th injector...,
Pat Ford
- Re: the 9th injector...,
Ernst denBroeder
- Re: the 9th injector...,
Pat Ford
- RE: the 9th injector...,
Mike Turner/ENGR/HQ/KEMET/US
- RE: the 9th injector...,
Mike Rolica
- Re: the 9th injector...,
Dan Plaskett
- 165 ECM idle question,
Rick Lindstedt
- Re:3800 ECM's,
Speartech
- Rev Limiter in AUJP,
Squash
- 2.8v6 tpi and a 730,
Ernst denBroeder
- <Possible follow-ups>
- Re: 2.8v6 tpi and a 730,
Bruce Plecan
- RE: 2.8v6 tpi and a 730,
Mike Rolica
- RE: 2.8v6 tpi and a 730,
Mike Rolica
- Re: 2.8v6 tpi and a 730,
Bruce Plecan
- RE: 2.8v6 tpi and a 730,
Mike Rolica
- RE: 2.8v6 tpi and a 730,
David Cooley
- Re: 2.8v6 tpi and a 730,
rr
- Re: 2.8v6 tpi and a 730,
Ludis Langens
- Re: 2.8v6 tpi and a 730,
Shannen Durphey
- RE: 2.8v6 tpi and a 730,
Mike Rolica
- RE: 2.8v6 tpi and a 730,
Mike Rolica
- Re: 2.8v6 tpi and a 730,
Ernst denBroeder
- Re: 2.8v6 tpi and a 730,
Tim De Coster
- Re: 2.8v6 tpi and a 730,
Tim De Coster
- RE: 2.8v6 tpi and a 730,
Mike Rolica
- Re: 2.8v6 tpi and a 730,
ECMnut
- Another Newbie Question, part II,
hi 50
- <Possible follow-ups>
- Re: Another Newbie Question, part II,
Bruce Plecan
- Re: Another Newbie Question, part II,
Shannen Durphey
- Re: Another Newbie Question, part II,
Shannen Durphey
- Re: Another Newbie Question, part II,
Garfield Willis
- Re: Another Newbie Question, part II,
Dave Zug
- Re: Another Newbie Question, part II,
Dave Zug
- Re: Another Newbie Question, part II,
Jim and Sharon Brady
- Re: Another Newbie Question, part II,
Bruce Plecan
- Re: Another Newbie Question, part II,
Tedscj
- Re: Another Newbie Question, part II,
Bruce Plecan
- Re: Another Newbie Question, part II,
TK
- Re: Another Newbie Question, part II,
Bruce Plecan
- RE: Another Newbie Question, part II,
Mike Rolica
- RE: Another Newbie Question, part II,
Ernst denBroeder
- Re: Another Newbie Question, part II,
Bruce Plecan
- Re: 255 MAF? (was blm based tuning),
Bruce Plecan
- Grand Prix digital dash [non efi],
Bob Valentine
- [ADMIN] Attachments,
Orin
- Buick ECM Trivia,
Ludis Langens
- RE: was MAF BLM based tuning now cab manifold to port injection,
Mike Rolica
- ADDX 1657,
Dan Plaskett
- Re: First quote in on chip carriers (Ouch),
Mike Dillon
- Re: Engine swap computer & wiring question (& 3800SC),
Tim De Coster
- Re: C3 with 8192 ALDL,
Pat Ford
- Quick ECM ID,
Marteney, Steven J.
- Re: EPROM manufacturer and device IDs,
thergen
- <Possible follow-ups>
- EPROM manufacturer and device IDs,
Ludis Langens
- Re: EPROM manufacturer and device IDs,
Ludis Langens
- RE: EPROM manufacturer and device IDs,
Mike Rolica
- RE: EPROM manufacturer and device IDs,
Shannen
- RE: EPROM manufacturer and device IDs,
Mike Rolica
- Re: EPROM manufacturer and device IDs,
bcroe
- Re: EPROM manufacturer and device IDs,
thergen
- Re: EPROM manufacturer and device IDs,
Ludis Langens
- Re: EPROM manufacturer and device IDs,
Matt S Bower
- Re: EPROM manufacturer and device IDs,
Jeff M
- The Factory harness...is good!,
Jim and Sharon Brady
- Another Newbie Question, part III,
hi 50
- <Possible follow-ups>
- Re: Another Newbie Question, part III,
Bruce Plecan
- Re: Another Newbie Question, part III,
lpwcruzr
- Re: Another Newbie Question, part III,
Squash
- Re: Another Newbie Question, part III,
lpwcruzr
- Re: Another Newbie Question, part III,
Squash
- Re: Mike V-> turbocharged z24 (was Re: 2.8v6 tpi and a 730),
Shannen Durphey
- A post from the newbie brigade - I'm getting closer (1 of many),
KasaRyan
- Re: A post from the newbie brigade - I'm getting closer (1 of many),
David Cooley
- RE: A post from the newbie brigade - I'm getting closer (1 of man y),
Mike Rolica
- TPI '165 pulling timing after Cold start,
Gabe
- <Possible follow-ups>
- Re: TPI '165 pulling timing after Cold start,
Bruce Plecan
- Re: TPI '165 pulling timing after Cold start,
Gabe
- RE: TPI '165 pulling timing after Cold start,
Marteney, Steven J.
- Re: TPI '165 pulling timing after Cold start,
Gabe
- Re: TPI '165 pulling timing after Cold start,
Bruce Plecan
- Re: TPI '165 pulling timing after Cold start,
Bruce Plecan
- Re: TPI '165 pulling timing after Cold start,
Gabe
- Re: TPI '165 pulling timing after Cold start,
Craig Marcho
- Re: TPI '165 pulling timing after Cold start,
Gabe
- Re: TPI '165 pulling timing after Cold start,
Bruce Plecan
- Re: TPI '165 pulling timing after Cold start,
Ludis Langens
- Re: TPI '165 pulling timing after Cold start,
Ludis Langens
- Re: TPI '165 pulling timing after Cold start,
Gabe
- Re: TPI '165 pulling timing after Cold start,
John D. Bachman
- Re: TPI '165 pulling timing after Cold start,
Bruce Plecan
- RE: TPI '165 pulling timing after Cold start,
Marteney, Steven J.
- Re: TPI '165 pulling timing after Cold start,
Gabe
- Re: TPI '165 pulling timing after Cold start,
Bruce Plecan
- Re: TPI '165 pulling timing after Cold start,
Ludis Langens
- Re: TPI '165 pulling timing after Cold start,
Romans, Mark
- Re: TPI '165 pulling timing after Cold start,
Bruce Plecan
- Re: TPI '165 pulling timing after Cold start,
Dan Plaskett
- Re: TPI '165 pulling timing after Cold start,
Squash
- Re: TPI '165 pulling timing after Cold start,
Bruce Plecan
- Re: TPI '165 pulling timing after Cold start,
Romans, Mark
- Re: TPI '165 pulling timing after Cold start,
Gabe
- ECU Bin Bytes 0x8000-0x8008,
Malcolm Robb, LC 0112G
- Re: Mike V-> turbocharged z24 (was Re: 2.8v6 tpi a,
Shannen
- 95 S-blazer base timeing,
Matt S Bower
- Re: Chip carrier buy for less than the price of a new car.,
Mike Dillon
- Got VSS . . .,
Scott Lundahl
- After Market Harness,
bcroe
- Hi,
black maj
- <Possible follow-ups>
- Re: Hi,
black maj
- Need info/help on gm ecm conversion,
Mike Rolica
- Calcing diff ratios ?,
Programmer
- FreeScan 2.0.0,
Andy Whittaker - Chester UK
- Injector R+R,
Bruce Plecan
- <Possible follow-ups>
- Re: Injector R+R,
Steven Ciciora
- Re: Injector R+R,
ECMnut
- Re: Injector R+R,
ECMnut
- Re: Injector R+R,
Bruce Plecan
- Re: Injector R+R,
Bruce Plecan
- Re: Injector R+R,
Garfield Willis
- Re: Injector R+R,
Bruce Plecan
- Re: Injector R+R,
rr
- Re: Injector R+R,
Peter D. Hipson
- Re: Injector R+R,
Bruce Plecan
- Re: Injector R+R,
Greg Hermann
- Re: Injector R+R,
D. Barry Stubbs
- Re: Injector R+R,
Shannen Durphey
- Re: Injector R+R,
Bruce Plecan
- Re: Injector R+R,
Bruce Plecan
- Re: Injector R+R,
Garfield Willis
- Re: Injector R+R,
steve ravet
- Re: Injector R+R,
Bob Valentine
- Re: Injector R+R,
Kevin Crain
- Re: Injector R+R,
Shannen Durphey
- What the max rpms anyones used a gmecm on?,
Bruce Plecan
- ATTN Scott: Re: Injector Duty cycle calculations,
timsiford
- Injector PWs - was duty cycle,
Barry Tisdale
- Re: Considering Injector Change..,
timsiford
- <Possible follow-ups>
- Considering Injector Change..,
Rodney Fulk
- RE: Considering Injector Change..,
the Fredericks
- Re: Considering Injector Change..,
Bruce Plecan
- RE: Considering Injector Change..,
Rodney Fulk
- RE: Considering Injector Change..,
Rodney Fulk
- Re: Considering Injector Change..,
Len Sabatine
- Re: Considering Injector Change..,
ECMnut
- Re: Considering Injector Change..,
Bruce Plecan
- RE: Considering Injector Change..,
the Fredericks
- Re: Considering Injector Change..,
ECMnut
- RE: Considering Injector Change..,
the Fredericks
- Re: Considering Injector Change..,
ECMnut
- FS: TIF 1500 Printer/scanner,
Peter D. Hipson
- Kwarm Kickdown Enabled??,
Gabe
- Re: big inch SBC,
KasaRyan
- 2-Bar 730/AUJP,
Squash
- Re: sbc in place of lt1,
Hotrodderzzz
- 2 Questions,
Rodney Fulk
- 1228707 ECM,
Bob Valentine
- Re: more details sbc in place of lt1,
Hotrodderzzz
- <Possible follow-ups>
- Re: more details sbc in place of lt1,
Andrew K. Mattei
- Re: more details sbc in place of lt1,
Bruce Plecan
- Re: more details sbc in place of lt1,
Scott & Jennifer Peitzsch
- Re: more details sbc in place of lt1,
Len Sabatine
- Re: more details sbc in place of lt1,
Bruce Plecan
- Re: more details sbc in place of lt1,
Andrew Mattei
- Re: more details sbc in place of lt1,
Bruce Plecan
- Re: more details sbc in place of lt1,
Len Sabatine
- Re: more details sbc in place of lt1,
Garfield Willis
- Re: more details sbc in place of lt1,
Roger Heflin
- Re: more details sbc in place of lt1,
bcroe
- Re: more details sbc in place of lt1,
Garfield Willis
- Re: more details sbc in place of lt1,
Len Sabatine
- Re: more details sbc in place of lt1,
Len Sabatine
- Re: more details sbc in place of lt1,
Garfield Willis
- Re: more details sbc in place of lt1,
Garfield Willis
- Re: more details sbc in place of lt1,
Shannen Durphey
- Re: more details sbc in place of lt1,
Shannen Durphey
- Re: more details sbc in place of lt1,
Len Sabatine
- Re: more details sbc in place of lt1,
Shannen Durphey
- Re: more details sbc in place of lt1,
Len Sabatine
- Re: more details sbc in place of lt1,
Ross Myers
- Re: more details sbc in place of lt1,
Scott Knight
- Re: more details sbc in place of lt1,
Len Sabatine
- Re: more details sbc in place of lt1,
Bruce Plecan
- Re: more details sbc in place of lt1,
Scott Knight
- Re: more details sbc in place of lt1,
Scott Knight
- Distrib needed,
Bruce Plecan
- Re: Len Sabatine optispark to sbc,
Hotrodderzzz
- turbo wastegate solenoid and MAP sensor,
NickG
- EEPROM Code gurus,
John T. Martin
- Re: Opti musings... (was Re: more details sbc in place of lt1),
Shannen Durphey
- 305 TPI bins,
Marteney, Steven J.
- 747 Rom Emulator / status,
Niinikoski, Juha
- Up-n-running...,
Shannen Durphey
- RE: 747 Rom Emulator / design,
Niinikoski, Juha
- <Possible follow-ups>
- Re: 747 Rom Emulator / design,
steve ravet
- Re: 747 Rom Emulator / design,
Steven Ciciora
- Re: 747 Rom Emulator / design,
Len Sabatine
- RE: 747 Rom Emulator / design,
Eric Aos
- RE: 747 Rom Emulator / design,
Steven Ciciora
- RE: 747 Rom Emulator / design,
Squash
- Re: 747 Rom Emulator / design,
thergen
- RE: 747 Rom Emulator / design,
Pat Ford
- RE: 747 Rom Emulator / design,
Eric Aos
- Re: 747 Rom Emulator / design,
rr
- Re: 747 Rom Emulator / design,
rr
- Re: 747 Rom Emulator / design,
Steven Ciciora
- Re: 747 Rom Emulator / design,
steve ravet
- Re: 747 Rom Emulator / design,
rr
- Re: 747 Rom Emulator / design,
rr
- Re: 747 Rom Emulator / design,
Steven Ciciora
- Re: 747 Rom Emulator / design,
rrauscher
- Re: 747 Rom Emulator / design,
Shannen Durphey
- Re: 747 Rom Emulator / design,
Ludis Langens
- Re: 747 Rom Emulator / design,
thergen
- Re: 747 Rom Emulator / design,
Bruce Plecan
- Re: 747 Rom Emulator / design,
Daniel N
- Re: 747 Rom Emulator / design,
rr
- Re: 747 Rom Emulator / design,
Bruce Plecan
- Re: 747 Rom Emulator / design,
Bruce Plecan
- Re: 747 Rom Emulator / design,
Ludis Langens
- Re: 747 Rom Emulator / design,
Steve Lamb
- RE: 747 checksum,
Niinikoski, Juha
- Nitrous Explosion,
Andy Whittaker - Chester UK
- <Possible follow-ups>
- Re: Nitrous Explosion,
Dan Plaskett
- Re: Nitrous Explosion,
Rick Lindstedt
- Re: Nitrous Explosion,
Chris Bennight
- Re: Nitrous Explosion,
Bruce Plecan
- Re: Nitrous Explosion,
Rick Lindstedt
- RE: Nitrous Explosion,
Michael Adams
- Re: Nitrous Explosion,
Greg Hermann
- Re: Nitrous Explosion,
rr
- RE: Nitrous Explosion,
Len Sabatine
- Re: Nitrous Explosion,
Pat Ford
- RE: Nitrous Explosion,
Don . F . Broadus
- Re: Nitrous Explosion,
Jeff Flanary
- RE: Nitrous Explosion,
Don . F . Broadus
- Re: Nitrous Explosion,
Greg Hermann
- RE: Nitrous Explosion,
Mike Rolica
- Re: Nitrous Explosion,
Bruce Plecan
- Re: Nitrous Explosion,
Dan Plaskett
- RE: Nitrous Explosion,
Len Sabatine
- Re: Nitrous Explosion,
Len Sabatine
- Re: Nitrous Explosion,
Garfield Willis
- Re: Nitrous Explosion,
Jeff Flanary
- RE: Nitrous Explosion,
Don . F . Broadus
- Re: Nitrous Explosion,
Garfield Willis
- RE: Nitrous Explosion,
Mike Rolica
- Re: Nitrous Explosion,
Garfield Willis
- 730 to Nissan,
Bruce Plecan
- Re: Up-n-running...vortec heads,
KasaRyan
- Hello and help please,
David Posea
- Diferent emulator projects,
Niinikoski, Juha
- BCC for Chips,
Dan Plaskett
- Writting to memcals,
Bruce Plecan
- ECM Identification,
Dan Plaskett
- hotter plugs on hopped rebuild,
lpwcruzr
- <Possible follow-ups>
- Re: hotter plugs on hopped rebuild,
gene l. clifford
- Re: hotter plugs on hopped rebuild,
Bruce Plecan
- Re: hotter plugs on hopped rebuild,
gene l. clifford
- Re: hotter plugs on hopped rebuild,
Programmer
- Re: hotter plugs on hopped rebuild,
Bruce Plecan
- Re: hotter plugs on hopped rebuild,
Len Sabatine
- Re: hotter plugs on hopped rebuild,
Shannen Durphey
- Re: hotter plugs on hopped rebuild,
alexpeper
- Re: hotter plugs on hopped rebuild,
ECMnut
- Re: hotter plugs on hopped rebuild,
ECMnut
- RE: hotter plugs on hopped rebuild,
Mike Rolica
- Bon Voyage, maties,
Garfield Willis
- ecm upgrade,
Daniel E. Griffin
- TPI/SFI article,
Thomas Matthews
- Can a GM ECM be tuned,
David Posea
- <Possible follow-ups>
- Re: Can a GM ECM be tuned,
David Cooley
- Re: Can a GM ECM be tuned,
David Posea
- Re: Can a GM ECM be tuned,
Andrew K. Mattei
- Re: Can a GM ECM be tuned,
alexpeper
- Re: Can a GM ECM be tuned,
David Posea
- Re: Can a GM ECM be tuned,
David Posea
- Re: Can a GM ECM be tuned,
ECMnut
- Re: Can a GM ECM be tuned,
Andrew K. Mattei
- Re: Can a GM ECM be tuned,
David Cooley
- Re: Can a GM ECM be tuned,
alexpeper
- Re: Can a GM ECM be tuned,
alexpeper
- Re: Can a GM ECM be tuned,
Dave & Irina Eicher
- Re: Can a GM ECM be tuned,
Andrew K. Mattei
- Up-n-running, pt 2,
Shannen Durphey
- Re: alternate plugs for al heads,
KasaRyan
- TBI Fuel Pressure,
Brent Obermiller
- RE: Engine light on getting code 12,
Jim Sloan
- EPROM SIMULATOR,
Swayze
- 1971/350 C10 EFI question,
Paul Beam
- Odp: Can a GM ECM be tuned,
Marek
- re-calibration software,
Phil Rickard
- Bendix efi,
Phil Rickard
- Male 12 PIN ALDL,
black maj
- Ecu Identification needed.,
Richard Wakeling
- 2732 and 2732A programming Q's,
Craig Marcho
- GM calibration stuff,
Bruce Plecan
- GM 8-Pin Module,
WEG1192
- Bin Library,
Bruce Plecan
- <Possible follow-ups>
- Re: Bin Library,
Programmer
- Re: Bin Library,
rweatherford
- Bin Library,
Bruce Plecan
- Re: Bin Library,
D. Barry Stubbs
- Re: Bin Library,
D. Barry Stubbs
- Re: Bin Library,
Shannen Durphey
- Re: Bin Library,
Bruce Plecan
- Re: Bin Library,
Jeff Kopp
- RE: Bin Library,
Mike Rolica
- Re: Bin Library,
Brent Obermiller
- Re: Bin Library,
Dominic Sorresso
- Re: Bin Library,
Bruce Plecan
- methanol/ethanol/gas 730/727 bins,
Mike Swayze
- EPROM Programming,
WEG1192
- <Possible follow-ups>
- RE: EPROM Programming,
Mike Rolica
- Re: EPROM Programming,
David Posea
- Re: EPROM Programming,
Bruce Plecan
- Re: EPROM Programming,
David Posea
- Re: EPROM Programming,
rr
- Re: EPROM Programming,
Bruce Plecan
- Re: EPROM Programming,
Shannen Durphey
- Re: EPROM Programming,
David Posea
- Re: EPROM Programming,
David Posea
- Re: EPROM Programming,
WEG1192
- Re: EPROM Programming,
Bruce Plecan
- Re: EPROM Programming,
WEG1192
- Re: EPROM Programming,
Romans, Mark
- Re: EPROM Programming,
Bruce Plecan
- Re: EPROM Programming,
WEG1192
- Re: EPROM Programming,
Romans, Mark
- Re: EPROM Programming,
WEG1192
- Re: EPROM Programming,
Shannen Durphey
- RE: EPROM Programming,
Mike Rolica
- RE: EPROM Programming,
Mike Rolica
- RE: EPROM Programming,
Mike Rolica
- Re: EPROM Programming,
Romans, Mark
- Re: EPROM Programming,
Len Sabatine
- Re: EPROM Programming,
Len Sabatine
- Re: EPROM Programming,
David Posea
- Re: EPROM Programming,
WEG1192
- Re: EPROM Programming,
Bruce Plecan
- Re: EPROM Programming,
WEG1192
- Re: EPROM Programming,
Shannen Durphey
- Re: EPROM Programming,
Bruce Plecan
- Re: EPROM Programming,
WEG1192
- Re: EPROM Programming,
David Posea
- Re: EPROM Programming,
Bruce Plecan
- Re: EPROM Programming,
Bruce Plecan
- Re: EPROM Programming,
Bruce Plecan
- Re: EPROM Programming,
Romans, Mark
- Re: EPROM Programming,
Shannen Durphey
- Re: EPROM Programming,
Bruce Plecan
- Re: EPROM Programming,
Len Sabatine
- Re: EPROM Programming,
Len Sabatine
- Re: EPROM Programming,
Jim and Sharon Brady
- Re: EPROM Programming,
Programmer
- Re: EPROM Programming,
Scot Sealander
- Re: EPROM Programming,
rr
- Re: EPROM Programming,
David Posea
- Re: EPROM Programming,
Scot Sealander
- RE: EPROM Programming,
Mike Rolica
- RE: EPROM Programming,
Marteney, Steven J.
- Fuel Hoses, Found,
Bob Valentine
- <Possible follow-ups>
- Re: Fuel Hoses, Found,
WEG1192
- Re: Fuel Hoses, Found,
Shannen Durphey
- Re: Fuel Hoses, Found,
Brent Obermiller
- Re: Fuel Hoses, Found,
Bruce Plecan
- Re: Fuel Hoses, Found,
Shannen Durphey
- Re: Fuel Hoses, Found,
Brent Obermiller
- Re: Fuel Hoses, Found,
Jim Yeagley
- Re: Fuel Hoses, Found,
rr
- Re: Fuel Hoses, Found,
steve ravet
- Off.. questions too basic?,
Shannen Durphey
- archives slim efi content,
Mike Swayze
- EPROM in place of BPROM,
Andrew Mattei
- Re: FPGA pricing,
Marc Randolph
- BFTP on 16191947, and 7730 for auction,
D. Barry Stubbs
- Re: GM calibration stuff (college comp.),
Gregg Gruen
- ADLD Data Stream Info Required,
Peter Gargano
- Kit Car Mag SFI,
Brent Obermiller
- BCC help,
Bruce Plecan
- <Possible follow-ups>
- Re: BCC help,
steve ravet
- Re: BCC help,
WEG1192
- Re: BCC help,
Shannen Durphey
- Re: BCC help,
Rob Higgins
- RE: BCC help,
Carl Summers
- Re: BCC help,
WEG1192
- Re: BCC help,
Shannen Durphey
- Re: BCC help,
Shannen Durphey
- Re: BCC help,
Shawn R. Lin
- Re: BCC help,
WEG1192
- Re: BCC help,
Ludis Langens
- Re: BCC help,
Shannen Durphey
- Re: BCC help,
Shannen Durphey
- Re: BCC help,
Bruce Plecan
- Re: BCC help,
Dan Plaskett
- Re: BCC help,
Swayze
- Re: BCC help,
Bruce Plecan
- Re: BCC help,
Andrew Mattei
- Re: BCC help,
Bruce Plecan
- Re: BCC help,
Shannen
- Re: BLM cell boundaries, Was: EPROM Programming,
Scot Sealander
- 90 or 91 Corvette wiring diagram,
Dan Plaskett
- 747 crossfire conversion question.,
Kevin R
- <Possible follow-ups>
- Re: 747 crossfire conversion question.,
Shannen Durphey
- Re: 747 crossfire conversion question.,
Bruce Plecan
- Re: 747 crossfire conversion question.,
Kevin R
- Re: 747 crossfire conversion question.,
WEG1192
- RE: 747 crossfire conversion question.,
Carl Summers
- Re: 747 crossfire conversion question.,
WEG1192
- RE: 747 crossfire conversion question.,
Carl Summers
- Re: 747 crossfire conversion question.,
Bruce Plecan
- Re: 747 crossfire conversion question.,
Shannen Durphey
- Re: 747 crossfire conversion question.,
rr
- Re: 747 crossfire conversion question.,
Shannen Durphey
- Re: 747 crossfire conversion question.,
WEG1192
- Re: 747 crossfire conversion question.,
Kevin R
- Re: 747 crossfire conversion question.,
Bruce Plecan
- Re: 747 crossfire conversion question.,
Bruce Plecan
- Re: 747 crossfire conversion question.,
David Posea
- RE: 747 crossfire conversion question.,
thergen
- archive location (was: Fuel Hoses, Found),
Glen Beard
- WBO2 question NTK box,
Carl Summers
- Spark Plug Analysis,
Bruce Plecan
- Re: EPROM Programmer,
WEG1192
- NTK o2 sensor identification,
Phil Rickard
- Re: 2000 Archives?,
WEG1192
- Off Topic: How to manually solder SMD chips?,
Jose Carlos Felicio Rublescki
- <Possible follow-ups>
- RE: Off Topic: How to manually solder SMD chips?,
Marteney, Steven J.
- Re: Off Topic: How to manually solder SMD chips?,
Matt S Bower
- Re: Off Topic: How to manually solder SMD chips?,
Andrew Mattei
- RE: Off Topic: How to manually solder SMD chips?,
Marc Piccioni
- Re: Off Topic: How to manually solder SMD chips?,
Pat Ford
- Re: Off Topic: How to manually solder SMD chips?,
steve ravet
- Re: Off Topic: How to manually solder SMD chips?,
Swayze
- RE: Off Topic: How to manually solder SMD chips?,
Steven Ciciora
- Re: Off Topic: How to manually solder SMD chips?,
Ernst denBroeder
- Re: Off Topic: How to manually solder SMD chips?,
Orin
- Re:Off Topic: How to manually solder SMD chips?,
Dig
- BCC DAs,
Bruce Plecan
- Re: backward injektors??,
Shannen Durphey
- Re: EPROM tuning head start,
WEG1192
- <Possible follow-ups>
- Re: EPROM tuning head start,
Bruce Plecan
- Re: EPROM tuning head start,
NickG
- Re: EPROM tuning head start,
WEG1192
- Re: EPROM tuning head start,
Bruce Plecan
- Re: EPROM tuning head start,
WEG1192
- RE: EPROM tuning head start,
Carl Summers
- Re: EPROM tuning head start,
Shannen Durphey
- Re: EPROM tuning head start,
Shannen Durphey
- Re: EPROM tuning head start,
WEG1192
- Re: EPROM tuning head start,
WEG1192
- Re: EPROM tuning head start,
NickG
- RE: EPROM tuning head start,
Marteney, Steven J.
- Re: EPROM tuning head start,
WEG1192
- Re: EPROM tuning head start,
Shannen Durphey
- Re: EPROM tuning head start,
WEG1192
- Re: EPROM tuning head start,
Ludis Langens
- Re: EPROM tuning head start,
Ludis Langens
- Macintosh Scantool Software...,
reizner
- 1227747 question,
Jeff Kopp
- pollution control device was :Re: Spark Plug Analysis,
Swayze
- Pin functions determined by PROM?,
D. Barry Stubbs
- Injector sizes / Rover 3.5 efi conversion,
Niinikoski, Juha
- Test Only.,
Richard Wakeling
- Re: tbi identified/ Injector sizes / Rover 3.5 efi conversion,
Shannen Durphey
- Re: Injector opening time,
bcroe
- <Possible follow-ups>
- Re: Injector opening time,
Mike
- Re: Injector opening time,
Bruce Plecan
- Re: Injector opening time,
Frank F Parker
- Re: Injector opening time,
rrauscher
- Re: Injector opening time,
rr
- Re: Injector opening time,
Peter Gargano
- Re: Injector opening time,
bcroe
- Re: Injector opening time,
Mike
- Re: Injector opening time,
Bruce Plecan
- Re: Injector opening time,
Swayze
- Re: Injector opening time,
rr
- Changing PROM w/ batt connected,
D. Barry Stubbs
- Re: ECMs interchangable?,
WEG1192
- RE ecm upgrade,
Daniel E. Griffin
- RE bcc help,
Daniel E. Griffin
- bcc decodes please,
Michael Davis
- TBI flow rate data clips from DIY-EFI,
Fran and Bud
- Flex hoses for TBI's,
Fran and Bud
- Factory no VATS chip ?,
Programmer
- laptop scantool.,
Gregg Gruen
- ECM calibrations for upgraded Xfire,
Dominic Sorresso
- <Possible follow-ups>
- Re: ECM calibrations for upgraded Xfire,
Bruce Plecan
- Re: ECM calibrations for upgraded Xfire,
Dominic Sorresso
- Re: ECM calibrations for upgraded Xfire,
Bruce Plecan
- RE: ECM calibrations for upgraded Xfire,
Mike Rolica
- Re: ECM calibrations for upgraded Xfire,
Dominic Sorresso
- Re: ECM calibrations for upgraded Xfire,
Dominic Sorresso
- RE: ECM calibrations for upgraded Xfire,
Mike Rolica
- Re: ECM calibrations for upgraded Xfire,
Dominic Sorresso
- RE: ECM calibrations for upgraded Xfire,
Mike Rolica
- RE: ECM calibrations for upgraded Xfire,
Gorden Jennings
- Re: ECM calibrations for upgraded Xfire,
Bruce Plecan
- Re: ECM calibrations for upgraded Xfire,
Dominic Sorresso
- Re: ECM calibrations for upgraded Xfire,
Dominic Sorresso
- Re: ECM calibrations for upgraded Xfire,
Bruce Plecan
- Re: ECM calibrations for upgraded Xfire,
Bruce Plecan
- Re: ECM calibrations for upgraded Xfire,
Dominic Sorresso
- Re: ECM calibrations for upgraded Xfire,
Steven Ciciora
- Re: ECM calibrations for upgraded Xfire,
Dominic Sorresso
- Re: ECM calibrations for upgraded Xfire,
Bruce Plecan
- Re: ECM calibrations for upgraded Xfire,
Bruce Plecan
- Re: ECM calibrations for upgraded Xfire,
Dominic Sorresso
- 7747calibrations,
Dominic Sorresso
- 165 connectors,
Marteney, Steven J.
- single vs double batch fire,
NickG
- Ford Codes,
Gabe
- posting methods...,
David Cooley
- hp-48G --slim efi content,
Mike Swayze
- Return Receipt,
Thomas McCabe
- Using the GMECM List - was Re: ECM calibr..,
Peter Gargano
- Help! Peak-hold injector driver design,
Lou
- Re: Haltech E6GM Questions,
WEG1192
- ignition module,
chetwagner
- Editing proms,
Bruce Plecan
- <Possible follow-ups>
- Re: Editing proms,
JN
- Re: Editing proms,
timsiford
- Re: Editing proms,
Jeff Kopp
- Re: Editing proms,
Bruce Plecan
- Re: Editing proms,
Craig Marcho
- Re: Editing proms,
Thomas Matthews
- Re: Editing proms,
Bruce Plecan
- Re: Editing proms,
JN
- RE: Editing proms,
Marteney, Steven J.
- Re: Editing proms,
timsiford
- Re: Editing proms,
Dominic Sorresso
- Re: Editing proms,
Craig Marcho
- RE: Editing proms,
David Cooley
- Re: Editing proms,
Bruce Plecan
- Re: Editing proms,
Bruce Plecan
- Re: Editing proms,
Dominic Sorresso
- Re: Editing proms,
JTesta1966
- Re: BCC help again,
WEG1192
- Cold 350 TBI,
Guenther,Max [ASCO/PA]
- GMEPro was Re: Editing proms,
Rick Lindstedt
- looking for a bin,
Pat Ford
- Re: Editing proms (editorial),
Bruce Plecan
- <Possible follow-ups>
- Re: Editing proms (editorial),
Dominic Sorresso
- Re: Editing proms (editorial),
Bruce Plecan
- Re: Editing proms (editorial),
Dominic Sorresso
- Re: Editing proms (editorial),
Kevin R
- Re: Editing proms (editorial),
Ludis Langens
- RE: Editing proms (editorial),
Carl Summers
- Re: Editing proms (editorial),
Kevin R
- Re: Editing proms (editorial),
Ludis Langens
- Re: Editing proms (editorial),
Kevin R
- Re: Editing proms (editorial),
ECMnut
- Re: Editing proms (editorial),
ECMnut
- Re: Editing proms (editorial),
Kevin R
- Re: Editing proms (editorial),
Ludis Langens
- Re: Shorty plugs (off topic),
Bruce Plecan
- Gmepro,
TK
- Some basic questions, please read,
JN
- MAF and 89 Vet stuff,
Romans, Mark
- <Possible follow-ups>
- Re: MAF and 89 Vet stuff,
TK
- Re: MAF and 89 Vet stuff,
Romans, Mark
- Re: MAF and 89 Vet stuff,
Romans, Mark
- Re: MAF and 89 Vet stuff,
Bruce Plecan
- Re: MAF and 89 Vet stuff,
Shannen Durphey
- RE: MAF and 89 Vet stuff,
J. T. Spilman
- Re: MAF and 89 Vet stuff,
Shannen Durphey
- Re: MAF and 89 Vet stuff,
NickG
- Re: MAF and 89 Vet stuff,
Dominic Sorresso
- Re: MAF and 89 Vet stuff,
Bruce Plecan
- Re: MAF and 89 Vet stuff,
Romans, Mark
- Re: MAF and 89 Vet stuff,
Romans, Mark
- Re: MAF and 89 Vet stuff,
Bruce Plecan
- Re: MAF and 89 Vet stuff,
Dan Townsend
- Re: MAF and 89 Vet stuff,
Dominic Sorresso
- Re: MAF and 89 Vet stuff,
Romans, Mark
- Re: MAF and 89 Vet stuff,
Bruce Plecan
- Re: MAF and 89 Vet stuff,
Dominic Sorresso
- Re: MAF and 89 Vet stuff,
Shannen Durphey
- Re: MAF and 89 Vet stuff,
Shannen Durphey
- Re: MAF and 89 Vet stuff,
JN
- RE: MAF and 89 Vet stuff,
Carl Summers
- Re: MAF and 89 Vet stuff,
Dominic Sorresso
- Re: Ported MAF,
WEG1192
- Re: Dual EGT on Ebay,
Bruce Plecan
- Re: Dual EGT on Ebay(LINK),
Dave Zug
- Re: 7730 ECM and Holley Projection,
WEG1192
- Vortec Throttle Body,
Jeff Kopp
- MEFI Controller,
Romans, Mark
- Re: ECM 1228746 Help,
WEG1192
- VETTE Communication Problem.,
John Smith
- 2 Bar map sensor and 730 BIN,
timsiford
- 1227165 CTS trouble,
John Bachman
- TPS boosters?,
Thomas Matthews
- Off idle transistions,
Bruce Plecan
- <Possible follow-ups>
- Re: Off idle transistions,
Dominic Sorresso
- Re: Off idle transistions,
Bruce Plecan
- Re: Off idle transistions,
Shannen Durphey
- Re: Off idle transistions,
Dominic Sorresso
- Re: Off idle transistions,
Bruce Plecan
- Re: Off idle transistions,
Dominic Sorresso
- Re: Off idle transistions,
Dominic Sorresso
- Re: Off idle transistions,
Shannen Durphey
- Re: Off idle transistions,
Dominic Sorresso
- Re: Off idle transistions,
Shannen Durphey
- Re: Off idle transistions,
Dominic Sorresso
- Leading guestions,
Bruce Plecan
- Re: Leading guestions+1,
Bruce Plecan
- ALDL European version,
Bert de Boer
- She's alive,
Bruce Plecan
- FW: question,
Mike Rolica
- Rich in closed loop idle,
JN
- O2 threads,
Bruce Plecan
- <Possible follow-ups>
- Re: O2 threads,
Matt S Bower
- RE: O2 threads,
Carl Summers
- Re: O2 threads,
Bruce Plecan
- RE: O2 threads,
Mike Rolica
- Re: O2 threads,
Greg Hermann
- Re: O2 threads,
Roger Heflin
- RE: O2 threads,
J. T. Spilman
- Re: O2 threads,
Shannen Durphey
- Re: O2 threads,
Bruce Plecan
- Re: O2 threads,
Scott Lundahl
- RE: O2 threads,
Squash
- RE: O2 threads,
Squash
- RE: O2 threads,
Niinikoski, Juha
- Re: O2 threads,
Peter Gargano
- RE: O2 threads,
Mike Rolica
- RE: O2 threads,
Mike Rolica
- Re: Tuning Eproms (was ECM 1228746 Help),
WEG1192
- 4wd range selector / vss in 747 application,
Niinikoski, Juha
- 305 TPI 4 Sale,
Bruce Plecan
- Re: Mercury balancing,
KasaRyan
- Tuning Tips questions,
Dominic Sorresso
- Fuel injector cleaning system?,
Gabe
- Odp: ALDL European version,
Marek
- Ford injectors,
Eric Norgard
- <Possible follow-ups>
- Re: Ford injectors,
Bruce Plecan
- Re: Ford injectors,
Dan Townsend
- Re: Ford injectors,
Jim and Sharon Brady
- Re: Ford injectors,
WEG1192
- RE: Ford injectors,
Craig Marcho
- Re: Ford injectors,
Dan Plaskett
- Re: Ford injectors,
Dan Townsend
- Re: Ford injectors,
timsiford
- Re: Ford injectors,
timsiford
- Re: Ford injectors,
JN
- Re: Ford injectors,
Bob Valentine
- Re: Ford injectors,
Dan Townsend
- Re: Ford injectors,
Bruce Plecan
- Re: Ford injectors,
Rick Lindstedt
- Re: Ford injectors,
Kevin Crain
- Re: Ford injectors,
Rick Lindstedt
- Re: Ford injectors,
Bruce Plecan
- Re: Ford injectors,
Bruce Plecan
- Re: Ford injectors,
John S. Gwynne
- Re: Ford injectors,
Kevin Crain
- Re: Ford injectors,
Len Sabatine
- Re: Ford injectors,
Roger Heflin
- Re: Ford injectors,
Roger Heflin
- Re: Ford injectors,
Shannen Durphey
- Re: Ford injectors,
NickG
- RE: Ford injectors,
Mike Rolica
- Fw: Rich in closed loop idle (3rd post),
JN
- Re: turbo manifolds, (was 2 Bar map sensor and 730 BIN),
Jim Yeagley
- 7730/ANHT code problem,
chetwagner
- Re: Ford injectors (& Question),
Romans, Mark
- teknickle difikulty,
Carl Summers
- Odp: Leading guestions+1,
Marek
- Injectors and AFPR,
Aaron G Kallotte
- Re: teknickle difikulty V6,
Chipsbyal
- PROMEDIT,
Mike Rolica
- gmecm oN 383 mopar,
BBBDLGCON
- Re: Closed Loop Disable,
WEG1192
- Re: GMEpro question,
WEG1192
- 4L60e,
Brent Obermiller
- <Possible follow-ups>
- Re: 4L60e,
Len Sabatine
- newby,
Andrew Plunkett
- <Possible follow-ups>
- Re: newby,
Bruce Plecan
- Re: newby,
Greg Hermann
- Re: newby,
Andrew Plunkett
- Re: newby,
Andrew Plunkett
- Re: newby,
KasaRyan
- Re: newby,
Bruce Plecan
- Re: newby,
Shannen Durphey
- Re: newby,
Andrew Plunkett
- Re: newby,
Andrew Plunkett
- Re: newby,
Andrew Plunkett
- Re: newby,
Bruce Plecan
- Re: newby,
Andrew Plunkett
- Re: newby,
Andrew Plunkett
- Re: newby,
Ludis Langens
- Re: newby,
Ludis Langens
- SBC TPI,
Bruce Plecan
- TPI,
Bruce Plecan
- 1226519 ECM,
Louis Baiani
- Old,
Gerald Pelnar
- Clarification on Memcal issues,
Tedscj
- 16183247,
Programmer
- <Possible follow-ups>
- Re: 16183247,
Bruce Plecan
- Re: 16183247,
David Cooley
- Re: 16183247,
David Cooley
- Re: 16183247,
Programmer
- Re: 16183247,
Programmer
- Re: 16183247,
David Cooley
- Re: 16183247,
Programmer
- Re: 16183247,
David Cooley
- Re: 16183247,
Programmer
- Re: 16183247,
Ludis Langens
- 02 Voltage Calculation,
Berg Family
- RPM limit on 94-95 LT1 pcm's,
Chris Bennight
- '749 questions,
Bill Shaw
- Needed to measure AFR,
Bruce Plecan
- Prom image to .ecu,
Andrew Plunkett
- 332 Stim board - was '749 questions,
Peter Gargano
- a/f ratio, conventional engines,
Frank F Parker
- reprogramming '747 limp home mode,
NickG
- Digest Format?,
Scott Lundahl
- C3 series or '7747 ECM for port fuel injection?,
Scott Lundahl
- RamJet 350 spec/install instructions,
Jeff Kopp
- 89 YB vs FB Prom Problem with AC,
Romans, Mark
- Fuel filter # found...,
Shannen Durphey
- ALDL info for 84 TBI Vette,
Louis Baiani
- Plug colors,
Bruce Plecan
- too much timing - past 45 crank degrees,
KasaRyan
- I finally took the leap - general tuning questions,
KasaRyan
- baffling turbo..,
Mike Rolica
Mail converted by MHonArc 2.6.11