[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Sensitivity of GM Knock Sensors.

To: <gmecm@diy-efi.org>
Subject: Sensitivity of GM Knock Sensors.
From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
Date: Sat, 8 Apr 2000 23:34:52 -0700

 Mark - Barry -Bruce

   My ECM is GM# 16159278 and in the tables I have nothing for PE Spark
adder or % of decay. I have not changed the Closed TPS Spark Advance vs.
RPM. This table stops @ 4800 RPM and is currently set at 34 degrees. Do any
of you think it would help a KR problem to adjust this table?  Just a
thought.


                          Thanks, Jim

Prev by Date: Re: manifold machining
Next by Date: Re: ONE WIRE O2 TO HEATED O2
Previous by thread: Re: ONE WIRE O2 TO HEATED O2
Next by thread: Re: Sensitivity of GM Knock Sensors.
Index(es):
- Date
- Thread