Mail Index

• Thread Index

• Re: Snap On Scan Tool
  • From: "Programmer" <nwester@eidnet.org>
• Re: injectors
  • From: "Programmer" <nwester@eidnet.org>
• Re: Snap On Scan Tool
  • From: "Programmer" <nwester@eidnet.org>
• RE: Lambda sensors - Where, Why and how Much ?
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• RE: Freighting an engine.
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: Rev Limiter
  • From: Marc Piccioni <piccioni@cadvision.com>
• injectors --- > liquidation
  • From: Marc Piccioni <piccioni@cadvision.com>
• mail delivery
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: Debugger board for P4 ECMs
  • From: Marc Piccioni <piccioni@cadvision.com>
• 48T group wheel buy status ???
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: Non efi, ecm, CCC (Really OLD ECM!)
  • From: Marc Piccioni <piccioni@cadvision.com>
• ebay TPI system
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: EFI POWWOW
  • From: Marc Piccioni <piccioni@cadvision.com>
• 30# injectors
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: ZIP Cleaning
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: 30# injectors
  • From: Marc Piccioni <piccioni@cadvision.com>
• vortec distributor pn 1104051
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: vortec distributor pn 1104051
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: vortec distributor pn 1104051
  • From: Marc Piccioni <piccioni@cadvision.com>
• TPI injectors for sale
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: '84 G-body with carbureted CCC
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: '84 G-body with carbureted CCC
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: '84 G-body with carbureted CCC
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: Automotive Circuit Protection - Part 1
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: Q-Jet sec size
  • From: Marc Piccioni <piccioni@cadvision.com>
• non - efi AFR heads for sale
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: Bins needed
  • From: Marc Piccioni <piccioni@cadvision.com>
• open loop non-cat bins
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: 4L60e transmission question
  • From: Marc Piccioni <piccioni@cadvision.com>
• efi bin's cross reference
  • From: Marc Piccioni <piccioni@cadvision.com>
• Was Chip carrier now sockets
  • From: Marc Piccioni <piccioni@cadvision.com>
• spare ecm's '7730 & '7748
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: Injector Duty cycle calculations
  • From: Marc Piccioni <piccioni@cadvision.com>
• big inch SBC EFI intake mainfold
  • From: Marc Piccioni <piccioni@cadvision.com>
• RE: big inch SBC EFI intake mainfold
  • From: Marc Piccioni <piccioni@cadvision.com>
• Re: 16176424 PCM pinouts
  • From: "Matt Tomlins" <mattpw@ozemail.com.au>
• Hey, what happened to the lights?
  • From: "TK" <terryk@foothill.net>
• Re: 16176424 PCM pinouts
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Subject: [admin] List services (automated monthly post)
  • From: jsg@esl.eng.ohio-state.edu
• Re: Prom ID with 16198262 ECM
  • From: "Bruce Plecan" <nacelp@bright.net>
• Att. Bruce here is the Bin File
  • From: "James Wilson" <Wilson.James4@worldnet.att.net>
• Re: 16176424 PCM pinouts
  • From: Richard Wakeling <kojab@ar.com.au>
• Re: DIS Module component ID
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: 16176424 PCM pinouts
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• EGR and MAP
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: 16176424 PCM pinouts
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: knock knock goes the jeep....
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Hey, what happened to the lights?
  • From: "Dave Zug" <dzug@delanet.com>
• GM Marine 10-pin DLC?
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: EGR and MAP
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: knock knock goes the jeep....
  • From: Terry <thartman@fastlane.net>
• Re: knock knock goes the jeep....
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: GM Marine 10-pin DLC?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: knock knock goes the jeep....
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1227165.. apyu bcc HELP!
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: knock knock goes the jeep....
  • From: Bja1078@aol.com
• 730/727
  • From: Bja1078@aol.com
• Re: GM Marine 10-pin DLC?
  • From: Chipsbyal@aol.com
• Re: knock knock goes the jeep....
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: DIS Module component ID
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Is someone here disassembling the 3.4L DOHC chip?
  • From: bcurrey@pop.ce.mediaone.net
• Re: 730/727
  • From: Ward <WSpoonemore@excite.com>
• Re: Few questions with regard to programming 101-Big Picture
  • From: Shannen Durphey <shannen@grolen.com>
• Re: knock knock goes the jeep....
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: GM Marine 10-pin DLC?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: EGR and MAP
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: 730/727
  • From: "TK" <terryk@foothill.net>
• Re[2]: 7730 memory locations
  • From: Geoff Richards <gerich@one.net.au>
• Re: 730/727
  • From: "Dave Zug" <dzug@delanet.com>
• DIS ?.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 730/727
  • From: cwagner@info2000.net
• V6 / 730 ALDL datastream
  • From: Bob Valentine <bob@tecmark.com>
• Re: DIS ?.
  • From: Frederic Breitwieser <frederic@xephic.dynip.com>
• Re: 730/727
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: DIS ?.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Is someone here disassembling the 3.4L DOHC chip?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 730/727
  • From: cwagner@info2000.net
• Nissan Pulsar Exa 195 ECU Pinouts
  • From: Andrew Wakeling <kojab@ar.com.au>
• Re: Prom ID with 16198262 ECM
  • From: "Programmer" <nwester@eidnet.org>
• Re: V6 / 730 ALDL datastream
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: 730/727
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Is someone here disassembling the 3.4L DOHC chip?
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Information for converting old carburated systems
  • From: Shannen Durphey <shannen@grolen.com>
• W32/NewApt virus
  • From: hmacneal@allegro.net
• Re: EGR and MAP
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 730/727
  • From: "TK" <terryk@foothill.net>
• Re: V6 / 730 ALDL datastream
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Wanted M68HC11EVB- Evaluation Board
  • From: PHXSYS@aol.com
• Information for converting old carburated systems
  • From: Ch-complat@www.dci.co.ir
• sample documented 68hc11 for single point injectio
  • From: Ch-complat@www.dci.co.ir
• Odp: GM Marine 10-pin DLC?
  • From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
• Re: DIS ?.
  • From: JTesta1966@aol.com
• Re: Prom ID with 16198262 ECM
  • From: "James Wilson" <Wilson.James4@worldnet.att.net>
• RE: DIS ?.
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Re: DIS ?.
  • From: JTesta1966@aol.com
• plenum volume
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: DIS ?.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: plenum volume
  • From: "Bruce Plecan" <nacelp@bright.net>
• 89 MAF Volt to freq conversion
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: Few questions with regard to programming 101-Big Picture
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 730/727
  • From: Bja1078@aol.com
• Re: 730/727
  • From: Bja1078@aol.com
• Re: 730/727
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: plenum volume
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: 730/727
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 730/727
  • From: "James Wilson" <Wilson.James4@worldnet.att.net>
• re: 7747 "shaking" the vechile?!
  • From: "Mika Helander" <mika_helander@hotmail.com>
• Re: 7747 "shaking" the vechile?!
  • From: JTesta1966@aol.com
• RE: 1227165.. apyu bcc HELP!
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 1227165.. apyu bcc HELP!
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• 94/95 GM PCM + M6 tranny question
  • From: Dave Hempstead <dave_hempstead@agilent.com>
• RE: 1227165.. apyu bcc HELP!
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 730/727
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: 1227165.. apyu bcc HELP!
  • From: ECMnut@aol.com
• Re: 94/95 GM PCM + M6 tranny question
  • From: Marc Randolph <mrand@pobox.com>
• RE: 1227165.. apyu bcc HELP!
  • From: Mike Rolica <mrolica@meridian-mag.com>
• update on knock knock goes the jeep....
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: 94/95 GM PCM + M6 tranny question
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: 730/727
  • From: Squash <realsquash@yahoo.com>
• Mike bumping into things
  • From: Pat Ford <pford@qnx.com>
• Re: 730/727
  • From: Pat Ford <pford@qnx.com>
• RE: Mike bumping into things
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Mike bumping into things
  • From: Pat Ford <pford@qnx.com>
• RE: Mike bumping into things
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Need help on 87 2.8v6
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 94/95 GM PCM + M6 tranny question
  • From: Eric Clark <eclark@hoser.com>
• Re: 730/727
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• How to read E6 eeprom while programming ?
  • From: PHXSYS@aol.com
• Re: Need help on 87 2.8v6
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: plenum volume
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Need help on 87 2.8v6
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 730/727
  • From: Pat Ford <pford@qnx.com>
• Re: 730/727
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 730/727
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: 730/727
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Spk747_3.ecu
  • From: "Jon Fedock" <Galadar@worldnet.att.net>
• Re: 730/727
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: 730/727
  • From: "the Fredericks" <fredericksk@worldnet.att.net>
• Re: 730/727
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 1227165.. apyu bcc HELP!
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: 1227165.. apyu bcc HELP!
  • From: Tom Sharpe <twsharpe@mtco.com>
• Re: 730/727
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: 730/727
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• New to the group..
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Mapedit? - http://www.uq.net.au/~zzchack/smapedit.html
  • From: Christian Hack <christianh@edmi.com.au>
• Re: 730/727
  • From: ECMnut@aol.com
• Re: New to the group..
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 730/727
  • From: ECMnut@aol.com
• Re: Mapedit? - http://www.uq.net.au/~zzchack/smapedit.html
  • From: cwagner@info2000.net
• Re: Need help on 87 2.8v6
  • From: Bob Valentine <bob@tecmark.com>
• Airbag DIag, was: re: Mike bumping into things
  • From: "Dave Zug" <dzug@delanet.com>
• Re: 730/727
  • From: "Dave Zug" <dzug@delanet.com>
• RE: 7747 "shaking" the vechile?!
  • From: Mika.Helander@softbit.fi
• P4 and on Memory Mapping
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: 730/727
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: New to the group..
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: 730/727
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: 730/727
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: New to the group..
  • From: Shannen Durphey <shannen@grolen.com>
• RE: Need help on 87 2.8v6
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: CarBytes v2
  • From: Daniel Ciobota <dciobota@hiwaay.net>
• EST
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: 89 MAF Volt to freq conversion
  • From: DC Smith <morepoweral@tetranet.net>
• RE: 89 MAF Volt to freq conversion
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Need help on 87 2.8v6
  • From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
• Re: Need help on 87 2.8v6
  • From: Shannen Durphey <shannen@grolen.com>
• Re: .ecu
  • From: cwagner@info2000.net
• RE: .ecu
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: .ecu
  • From: mswayze@truswood.com (Mike Swayze)
• CarBytes v2
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• RE: .ecu
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: .ecu
  • From: cwagner@info2000.net
• RE: .ecu
  • From: cwagner@info2000.net
• Re: .ecu
  • From: mswayze@truswood.com (Mike Swayze)
• Re: 730/727
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EST
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: .ecu
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: P4 and on Memory Mapping
  • From: Ward <wspoonemore@excite.com>
• Re: P4 and on Memory Mapping
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: 89 MAF Volt to freq conversion
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: 165 to late MAF
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• RE: New to the group..
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: 89 MAF Volt to freq conversion
  • From: Mark Romans <romans@pacbell.net>
• Re: 89 MAF Volt to freq conversion
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: 165 to late MAF
  • From: PCMdoc <PCMdoc@surfree.com>
• RE: 89 MAF Volt to freq conversion
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: .ecu
  • From: mswayze@truswood.com (Mike Swayze)
• Re: 165 to late MAF
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: 89 MAF Volt to freq conversion
  • From: DC Smith <morepoweral@tetranet.net>
• Re: 89 MAF Volt to freq conversion
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 89 MAF Volt to freq conversion
  • From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
• Re: 89 MAF Volt to freq conversion
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: 89 MAF Volt to freq conversion
  • From: Carl Summers <InTech@writeme.com>
• sitepage(previously 89 MAF Volt...)
  • From: mswayze@truswood.com (Mike Swayze)
• RE: 89 MAF Volt to freq conversion
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: 89 MAF Volt to freq conversion
  • From: "Bruce Plecan" <nacelp@bright.net>
• Archives
  • From: "Geoff Richards" <gerich@one.net.au>
• Re: Archives
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Archives
  • From: digi <digi@saturn.terahertz.net>
• Re: Archives
  • From: "Geoff Richards" <gerich@one.net.au>
• Re: Archives
  • From: "Geoff Richards" <gerich@one.net.au>
• Re: Archives
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Archives
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Archives
  • From: Eric Clark <eclark@hoser.com>
• Re: Archives
  • From: digi <digi@saturn.terahertz.net>
• Re: Archives
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Archives
  • From: Scott Knight <sknight@mich.com>
• Re: Archives
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Archives
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: .ecu/prom masks, some variants
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Archives
  • From: "Bruce Plecan" <nacelp@bright.net>
• More stunning news from CSH, HQ
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: 89 MAF Volt to freq conversion
  • From: "the Fredericks" <fredericksk@worldnet.att.net>
• 730 DIS
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: Archives
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: 165 to late MAF
  • From: PCMdoc <PCMdoc@surfree.com>
• Re: P4 and on Memory Mapping
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: New to the group..
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Need help on 87 2.8v6
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• New GM web site
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Archives
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: 165 to late MAF
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: Archives
  • From: "Bruce Plecan" <nacelp@bright.net>
• X-fire
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: X-fire
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 165 to late MAF
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Archives
  • From: Scott Knight <sknight@mich.com>
• X-fire
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: Archives
  • From: Scott Knight <sknight@mich.com>
• Re: X-fire
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: 165 to late MAF
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: 730 DIS
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: X-fire
  • From: "Ken Kelly" <ken73@houston.rr.com>
• RE: X-fire
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: X-fire
  • From: Shannen Durphey <shannen@grolen.com>
• Re: X-fire
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: .ecu
  • From: cwagner@info2000.net
• Re: 165 to late MAF
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Archives
  • From: "Geoff Richards" <gerich@one.net.au>
• Re: 165 to late MAF
  • From: PCMdoc <PCMdoc@surfree.com>
• Re: 165 to late MAF
  • From: PCMdoc <PCMdoc@surfree.com>
• Re: 165 to late MAF
  • From: PCMdoc <PCMdoc@surfree.com>
• RE: Archives
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Archives
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• RE: Archives
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Archives
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: Archives
  • From: ECMnut@aol.com
• RE: 730 DIS
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Archives
  • From: Scott Knight <sknight@mich.com>
• RE: 165 to late MAF
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Archives
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: 730 DIS
  • From: Marc Randolph <mrand@pobox.com>
• Re: .ecu/prom masks, some variants
  • From: mswayze@truswood.com (Mike Swayze)
• more DIS questions
  • From: mswayze@truswood.com (Mike Swayze)
• Re: 730 DIS
  • From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
• Re: 730 DIS
  • From: mswayze@truswood.com (Mike Swayze)
• Re: P4 and on Memory Mapping
  • From: Ward <WSpoonemore@excite.com>
• Re: 730 DIS
  • From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
• x-fire pinouts
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: 730 DIS
  • From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
• Re: .ecu/prom masks, some variants
  • From: cwagner@info2000.net
• Datasheet for MC33199
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: 730 DIS
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 730 DIS
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 730 DIS
  • From: mswayze@truswood.com (Mike Swayze)
• Re: 730 DIS
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: x-fire pinouts
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: x-fire pinouts
  • From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
• Re: 730 DIS
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: P4 and on Memory Mapping
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: X-fire
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: x-fire pinouts
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Archives
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 165 to late MAF
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 165 to late MAF
  • From: Bja1078@aol.com
• Re: Airbag DIag, was: re: Mike bumping into things
  • From: Qeskimeaux@aol.com
• Re: Archives
  • From: ECMnut@aol.com
• Re: 730 DIS
  • From: Qeskimeaux@aol.com
• Re: x-fire pinouts
  • From: Shannen Durphey <shannen@grolen.com>
• Re: more DIS questions
  • From: Shannen Durphey <shannen@grolen.com>
• Opel Barina Pin-outs
  • From: Richard Wakeling <kojab@ar.com.au>
• Re: 730 DIS
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• VSS output
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: 730 DIS
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 730 DIS
  • From: "John T. Martin" <gmman@eskimo.com>
• Re: 730 DIS
  • From: "TK" <terryk@foothill.net>
• Odp: Datasheet for MC33199
  • From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
• Re: Opel Barina Pin-outs
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: Datasheet for MC33199
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: 730 DIS
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: x-fire pinouts
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: 16176424 PCM pinouts
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: 730 DIS
  • From: Shannen Durphey <shannen@grolen.com>
• Re: more DIS questions
  • From: Bob Valentine <bob@tecmark.com>
• Re: 730 DIS
  • From: Bob Valentine <bob@tecmark.com>
• Re: 730 DIS
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: more DIS questions
  • From: "TK" <terryk@foothill.net>
• Re: more DIS questions
  • From: Shannen Durphey <shannen@grolen.com>
• Re: more DIS questions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: more DIS questions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: more DIS questions
  • From: bearbvd@cmn.net (Greg Hermann)
• 96 LT1
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: 96 LT1
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: 730/727
  • From: cwagner@info2000.net
• RE: 96 LT1
  • From: "the Fredericks" <fredericksk@worldnet.att.net>
• Re: 96 LT1
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: more DIS questions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 730/727
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 730/727
  • From: ECMnut@aol.com
• Re: 730/727
  • From: cwagner@info2000.net
• Re: 730/727
  • From: "Bruce Plecan" <nacelp@bright.net>
• Timing Jump on 165/TPI System
  • From: "Craig Moates" <craig.moates@home.com>
• Re: Timing Jump on 165/TPI System
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 96 LT1
  • From: Shannen Durphey <shannen@grolen.com>
• Re: more DIS questions
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: 96 LT1
  • From: Shannen Durphey <shannen@grolen.com>
• Re: more DIS questions
  • From: Shannen Durphey <shannen@grolen.com>
• Re: VSS output
  • From: Ludis Langens <ludis@cruzers.com>
• Re: .ecu/prom masks, some variants
  • From: Ludis Langens <ludis@cruzers.com>
• Re: New to the group..
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Need help on 87 2.8v6
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 730 DIS
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Archives
  • From: "Geoff Richards" <gerich@one.net.au>
• DIS Tach signal
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: L -plates
  • From: "Bruce Plecan" <nacelp@bright.net>
• 4 Cyl 730
  • From: "Bruce Plecan" <nacelp@bright.net>
• L -plates
  • From: "Paul Smith" <ou8acpu@bigpond.com>
• Snap On Scan Tool
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: more DIS questions
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: Timing Jump on 165/TPI System
  • From: "John T. Martin" <gmman@eskimo.com>
• Re: Timing Jump on 165/TPI System
  • From: Qeskimeaux@aol.com
• Re: Timing Jump on 165/TPI System
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: DIS Tach signal
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EST
  • From: "Programmer" <nwester@eidnet.org>
• Re: EST
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: more DIS questions
  • From: Ward <WSpoonemore@excite.com>
• Re: more DIS questions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EST
  • From: Mark Romans <romans@pacbell.net>
• Re: Timing Jump on 165/TPI System
  • From: Mark Romans <romans@pacbell.net>
• Freighting an engine.
  • From: "TK" <terryk@foothill.net>
• Re: Snap On Scan Tool
  • From: Shannen Durphey <shannen@grolen.com>
• Re: DIS Tach signal
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Timing Jump on 165/TPI System
  • From: Shannen Durphey <shannen@grolen.com>
• Re: EST
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Timing Jump on 165/TPI System
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Timing Jump on 165/TPI System
  • From: Mark Romans <romans@pacbell.net>
• Re: Timing Jump on 165/TPI System
  • From: Mark Romans <romans@pacbell.net>
• Re: Freighting an engine.
  • From: Qeskimeaux@aol.com
• Re: Timing Jump on 165/TPI System
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Freighting an engine.
  • From: "TK" <terryk@foothill.net>
• Re: Freighting an engine.
  • From: "TK" <terryk@foothill.net>
• Re: Freighting an engine.
  • From: "TK" <terryk@foothill.net>
• RE: Freighting an engine.
  • From: Carl Summers <InTech@writeme.com>
• Re: Timing Jump on 165/TPI System
  • From: Mark Romans <romans@pacbell.net>
• Re: Freighting an engine.
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Timing Jump on 165/TPI System
  • From: Mark Romans <romans@pacbell.net>
• Emulating... the pros
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Freighting an engine.
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: Emulating... the pros
  • From: "TK" <terryk@foothill.net>
• Re: Freighting an engine.
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Freighting an engine.
  • From: "TK" <terryk@foothill.net>
• Re: Snap On Scan Tool
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Datasheet for MC33199
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• IAC Orifice
  • From: mswayze@truswood.com (Mike Swayze)
• Re: 4 Cyl 730
  • From: Pat Ford <pford@qnx.com>
• 92 LT1 chip and computer
  • From: Carl Summers <InTech@writeme.com>
• Re: 92 LT1 chip and computer
  • From: Roger Heflin <rah@horizon.hit.net>
• RE: 92 LT1 chip and computer
  • From: Carl Summers <InTech@writeme.com>
• RE: 92 LT1 chip and computer
  • From: Roger Heflin <rah@horizon.hit.net>
• LT1 manifold question (sort of NOT ECM related)
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: LT1 manifold question (sort of NOT ECM related)
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: LT1 manifold question (sort of NOT ECM related)
  • From: Andrew Choset <agc3@cornell.edu>
• Re: LT1 manifold question (sort of NOT ECM related)
  • From: Rick Lindstedt <rick@mafb.org>
• Re: LT1 manifold question (sort of NOT ECM related)
  • From: Eric Clark <eclark@hoser.com>
• RE: LT1 manifold question (sort of NOT ECM related)
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: LT1 manifold question (sort of NOT ECM related)
  • From: Rick Lindstedt <rick@mafb.org>
• LT1 manifold adaptation (was question)
  • From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
• Re: 92 LT1 chip and computer
  • From: Shannen Durphey <shannen@grolen.com>
• Re: LT1 manifold question (sort of NOT ECM related)
  • From: Shannen Durphey <shannen@grolen.com>
• Crank Angle Sensors
  • From: "Rich Vandervoort" <richvandervoort@hotmail.com>
• Re: Crank Angle Sensors
  • From: "Bruce Plecan" <nacelp@bright.net>
• Crank Angle Sensors
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: Timing Jump on 165/TPI System
  • From: Mark Romans <romans@pacbell.net>
• Re: Timing Jump on 165/TPI System
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Snap On Scan Tool
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Crank Angle Sensors
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Snap On Scan Tool
  • From: Shannen Durphey <shannen@grolen.com>
• dead simple recap
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• VSS on 730
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• RE: Timing Jump on 165/TPI System
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: EST
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Timing Jump on 165/TPI System
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Snap On Scan Tool
  • From: Shannen Durphey <shannen@grolen.com>
• RE: dead simple recap
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Re: dead simple recap
  • From: Shannen Durphey <shannen@grolen.com>
• Re: dead simple recap
  • From: mswayze@truswood.com (Mike Swayze)
• RE: dead simple recap
  • From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
• prom emulator circuit--PCAD
  • From: mswayze@truswood.com (Mike Swayze)
• RE: prom emulator circuit--PCAD
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: prom emulator circuit--PCAD
  • From: Carl Summers <InTech@writeme.com>
• Re: Timing Jump on 165/TPI System
  • From: Mark Romans <romans@pacbell.net>
• Re: Timing Jump on 165/TPI System
  • From: Mark Romans <romans@pacbell.net>
• Re: Timing Jump on 165/TPI System
  • From: "Bruce Plecan" <nacelp@bright.net>
• Ken & Shannon re:Crossfire to 7747 pinout
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: prom emulator circuit--PCAD
  • From: steve <steve@roundmailingsystems.com>
• Re: VSS on 730
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: dead simple recap
  • From: "Bruce Plecan" <nacelp@bright.net>
• 68HC11 Disassembler...
  • From: Donald Whisnant <dewhisna@ix.netcom.com>
• Re: dead simple recap
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: LT1 manifold question (sort of NOT ECM related)
  • From: "gene l. clifford" <genelc@idworld.net>
• RE: Ken & Shannon re:Crossfire to 7747 pinout
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: Ken & Shannon re:Crossfire to 7747 pinout
  • From: "Kevin Reynolds" <kereyn@gte.net>
• another Xfire to 7747 wiring question.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Snap On Scan Tool
  • From: Thomas McCabe <mccabet@mediaone.net>
• Re: dead simple recap
  • From: Ludis Langens <ludis@cruzers.com>
• Re: VSS on 730
  • From: Ludis Langens <ludis@cruzers.com>
• Odp: OBDII cable source
  • From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
• injectors
  • From: cwagner@info2000.net
• Re: prom emulator circuit--PCAD
  • From: Karon Swayze <kswayze@bellsouth.net>
• Re: dead simple recap
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: VSS on 730
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: injectors
  • From: Richard Wakeling <kojab@ar.com.au>
• Re: VSS on 730
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Snap On Scan Tool
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: another Xfire to 7747 wiring question.
  • From: Shannen Durphey <shannen@grolen.com>
• again:eprom emulator circuits-pcad
  • From: Swayze <kswayze@bellsouth.net>
• Re: Snap On Scan Tool
  • From: Frederic Breitwieser <frederic@xephic.dynip.com>
• Re: Ken & Shannon re:Crossfire to 7747 pinout
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Snap On Scan Tool
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Snap On Scan Tool
  • From: Thomas McCabe <mccabet@mediaone.net>
• Dual injector select on crossfire injection.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: injectors
  • From: cwagner@info2000.net
• Re: Snap On Scan Tool
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: Dual injector select on crossfire injection.
  • From: Ludis Langens <ludis@cruzers.com>
• Re: VSS on 730
  • From: Ludis Langens <ludis@cruzers.com>
• Re: MC6803U4 info?
  • From: Ludis Langens <ludis@cruzers.com>
• ECM Bench kelp needed
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: ECM Bench kelp needed
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: ECM Bench kelp needed
  • From: Matt S Bower <m.s.bower@cummins.com>
• Re: ECM Bench kelp needed
  • From: thergen@svn.net
• RE: Timing Jump on 165/TPI System
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Hi and just joined this group
  • From: Team ZR1 <teamzr1@teamzr1.com>
• RE: ECM Bench kelp needed
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Hi and just joined this group
  • From: Swayze <kswayze@bellsouth.net>
• Re: Hi and just joined this group
  • From: Swayze <kswayze@bellsouth.net>
• Re: Timing Jump on 165/TPI System
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: ECM Bench kelp needed
  • From: thergen@svn.net
• Re: Hi and just joined this group
  • From: Mark Romans <romans@pacbell.net>
• Re: Hi and just joined this group
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Hi and just joined this group
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: Snap On Scan Tool
  • From: "Programmer" <nwester@eidnet.org>
• 7747 AC connection.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Introduction
  • From: "Sam Stratton" <transamsam@hotmail.com>
• Re: Introduction
  • From: "TK" <terryk@foothill.net>
• RE: Snap On Scan Tool
  • From: Marc Piccioni <piccioni@cadvision.com>
• Memcals
  • From: "Geoff Richards" <gerich@one.net.au>
• Re: Memcals
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Memcals
  • From: JTesta1966@aol.com
• Re: Memcals
  • From: Swayze <kswayze@bellsouth.net>
• Re: Snap On Scan Tool
  • From: "Programmer" <nwester@eidnet.org>
• CR Util
  • From: "Dave Zug." <dzug@delanet.com>
• Re: Memcals
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Memcals
  • From: "Geoff Richards" <gerich@one.net.au>
• Re: Memcals
  • From: steve ravet <sravet@arm.com>
• Re: Memcals
  • From: "Bruce Plecan" <nacelp@bright.net>
• What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: What model ECM is this ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Memcals
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: What model ECM is this ?
  • From: Mark Romans <romans@pacbell.net>
• Re: What model ECM is this ?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: What model ECM is this ?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: Memcals
  • From: "Dave Zug" <dzug@delanet.com>
• Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: What model ECM is this ?
  • From: Ludis Langens <ludis@cruzers.com>
• Re: What model ECM is this ?
  • From: Scot Sealander <Sealand@clarityconnect.com>
• 1227165 89 and Burst knock
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: What model ECM is this ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: starting point L-plates
  • From: "Bruce Plecan" <nacelp@bright.net>
• starting point L-plates
  • From: "Paul Smith" <ou8acpu@bigpond.com>
• Re: What model ECM is this ?
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: Memcals
  • From: Swayze <kswayze@bellsouth.net>
• Re;Re: What model ECM is this ?
  • From: Swayze <kswayze@bellsouth.net>
• Gummy Chryslers
  • From: "Programmer" <nwester@eidnet.org>
• Re: Memcals
  • From: Swayze <kswayze@bellsouth.net>
• Re: Gummy Chryslers
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Gummy Chryslers
  • From: Swayze <kswayze@bellsouth.net>
• Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: What model ECM is this ?
  • From: Mark Romans <romans@pacbell.net>
• Re: 1227165 89 and Burst knock
  • From: Mark Romans <romans@pacbell.net>
• Re: Gummy Chryslers
  • From: Swayze <kswayze@bellsouth.net>
• Re: What model ECM is this ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: What model ECM is this ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1227165 89 and Burst knock
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1227165 89 and Burst knock
  • From: Mark Romans <romans@pacbell.net>
• Re: What model ECM is this ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Clues needed
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: Clues needed
  • From: Mark Romans <romans@pacbell.net>
• Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: Clues needed
  • From: PCMdoc <PCMdoc@surfree.com>
• BBC ACFB?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: What model ECM is this ?
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: What model ECM is this ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Clues needed
  • From: "TK" <terryk@foothill.net>
• Re: Memcals
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: Memcals
  • From: "Bruce Plecan" <nacelp@bright.net>
• OFF SUBJECT re: WHAY ECM IS THIS
  • From: Swayze <kswayze@bellsouth.net>
• Re: Clues needed
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Clues needed
  • From: PCMdoc <PCMdoc@surfree.com>
• Re: Clues needed
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: What model ECM is this ?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Clues needed
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: Clues needed
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: Memcals
  • From: "Dave Zug" <dzug@delanet.com>
• Re: What model ECM is this ?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Gummy Chryslers
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Memcals
  • From: Shannen Durphey <shannen@grolen.com>
• I'm new...test
  • From: ronald.j.selberg@exgate.tek.com
• ECM data logging w/new laptop
  • From: James P Hunt <war_machine1@juno.com>
• Re: Memcals
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Memcals
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: Memcals
  • From: Shannen Durphey <shannen@grolen.com>
• Introduction
  • From: ronald.j.selberg@exgate.tek.com
• Re: Gummy Chryslers
  • From: "Programmer" <nwester@eidnet.org>
• Re: Gummy Chryslers
  • From: "Programmer" <nwester@eidnet.org>
• RE: Gummy Chryslers
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: Gummy Chryslers
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Gummy Chryslers
  • From: Jason Weir <jweir@worldnet.att.net>
• High Flow MAF revisited - (Porsche 928 voltage MAF)
  • From: Davis <davis@mail.eecis.udel.edu>
• Re: Gummy Chryslers
  • From: bearbvd@cmn.net (Greg Hermann)
• [no subject]
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Gummy Chryslers
  • From: "Dave Zug" <dzug@delanet.com>
• Re: GMECM Digest V2 #20
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Gummy Chryslers
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: Gummy Chryslers
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• bin needed
  • From: Shannen Durphey <shannen@grolen.com>
• Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Bin recieved...
  • From: Shannen Durphey <shannen@grolen.com>
• Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
  • From: Mark Romans <romans@pacbell.net>
• Re: What model ECM is this ?
  • From: Mark Romans <romans@pacbell.net>
• Re: What model ECM is this ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: Clues needed
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: What model ECM is this ?
  • From: Scott Knight <scott@scottknight.com>
• Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
  • From: "alexpeper" <alexpeper@email.msn.com>
• RE;Re: What model ECM is this ?
  • From: Swayze <kswayze@bellsouth.net>
• Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
  • From: Swayze <kswayze@bellsouth.net>
• 730 .ecu file
  • From: James P Hunt <war_machine1@juno.com>
• Re: RE;Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: What model ECM is this ?
  • From: Mark Romans <romans@pacbell.net>
• Re: What model ECM is this ?
  • From: Mark Romans <romans@pacbell.net>
• Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
  • From: "Dave Zug" <dzug@delanet.com>
• Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
  • From: "Dave Zug" <dzug@delanet.com>
• Re: What model ECM is this ?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: What model ECM is this ?
  • From: Chipsbyal@aol.com
• Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• .bin file needed..
  • From: Mike Wesley <mwesley@mediaone.net>
• Re: 730 .ecu file
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Timing Jump on 165/TPI System
  • From: Mark Romans <romans@pacbell.net>
• Re: 730 .ecu file
  • From: James P Hunt <war_machine1@juno.com>
• Re: 730 .ecu file
  • From: James P Hunt <war_machine1@juno.com>
• Re: .bin file needed..
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: RE;Re: What model ECM is this ?
  • From: Swayze <kswayze@bellsouth.net>
• Re: 730 .ecu file
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Timing Jump on 165/TPI System
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Timing Jump on 165/TPI System
  • From: Mark Romans <romans@pacbell.net>
• Re: 730 .ecu file
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 730 .ecu file
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 730 .ecu file
  • From: "TK" <terryk@foothill.net>
• Re: Fw: 747 programing
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 730 .ecu file
  • From: "Robert W. Hughes" <rwhughe@ev1.net>
• Re: 730 .ecu file
  • From: "TK" <terryk@foothill.net>
• Re: Fw: 747 programing
  • From: "Dave Zug" <dzug@delanet.com>
• Re: starting point L-plates
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• RE: starting point L-plates
  • From: Mika.Helander@softbit.fi
• Spark Reference Angle for 8 pin HEI module
  • From: Stuart Bunning <stuart@kenelec.com.au>
• Re: Spark Reference Angle for 8 pin HEI module
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: What model ECM is this ?
  • From: Daniel Ciobota <dciobota@hiwaay.net>
• Re: What model ECM is this ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: What model ECM is this ?
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: 730 .ecu file
  • From: James P Hunt <war_machine1@juno.com>
• Red Alert, Bin needed
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 730 .ecu file
  • From: James P Hunt <war_machine1@juno.com>
• Re: 730 .ecu file
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 730 .ecu file
  • From: James P Hunt <war_machine1@juno.com>
• Syncing crossfire injection
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: CarBytes V2 now on GM-ECM ftp site
  • From: Daniel Ciobota <dciobota@hiwaay.net>
• Re: Gummy Chryslers
  • From: Swayze <kswayze@bellsouth.net>
• Re: Gummy Chryslers
  • From: "Programmer" <nwester@eidnet.org>
• Re: Gummy Chryslers
  • From: Swayze <kswayze@bellsouth.net>
• Re: Gummy Chryslers
  • From: "Programmer" <nwester@eidnet.org>
• CarBytes V2 now on GM-ECM ftp site
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Re: 730 .ecu file
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Syncing crossfire injection
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Gummy Chryslers
  • From: "Programmer" <nwester@eidnet.org>
• RE: Syncing crossfire injection
  • From: "Ken Kelly" <ken73@houston.rr.com>
• MAF conversion revisited
  • From: Swayze <kswayze@bellsouth.net>
• RE: Syncing crossfire injection
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: .bin file needed..
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• RE: Syncing crossfire injection
  • From: "Ken Kelly" <ken73@houston.rr.com>
• RE: Syncing crossfire injection
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: CarBytes V2 now on GM-ECM ftp site
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Re: Software request
  • From: Swayze <kswayze@bellsouth.net>
• Software request
  • From: Ch-complat@www.dci.co.ir
• CarBytes V2_All.zip now on GM-ECM ftp site (nm)
  • From: "John LeBlanc" <jleblanc@malcams.com>
• Re: starting point L-plates
  • From: "Paul Smith" <ou8acpu@bigpond.com>
• Re: Red Alert, Bin needed
  • From: "Programmer" <nwester@eidnet.org>
• '730 ecu
  • From: Swayze <kswayze@bellsouth.net>
• Re: Red Alert, Bin needed
  • From: "Bruce Plecan" <nacelp@bright.net>
• LT5 Info.., and 1228331 stuff in general.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: '730 ecu
  • From: "Bruce Plecan" <nacelp@bright.net>
• Just a little follow up to LT5 posting
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Marc Randolph <mrand@pobox.com>
• Scantool for '93 4.3L?
  • From: Jared Tschetter <jtschetter@vermeermfg.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Daniel Ciobota <dciobota@hiwaay.net>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Scantool for '93 4.3L?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Scantool for '93 4.3L?
  • From: Jared Tschetter <jtschetter@vermeermfg.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Scantool for '93 4.3L?
  • From: Carl Summers <InTech@writeme.com>
• Re: '730 ecu
  • From: "Programmer" <nwester@eidnet.org>
• Re: '730 ecu
  • From: "Programmer" <nwester@eidnet.org>
• Vette serial data and scan tool communications
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Uploading Stuff To FTP Incoming
  • From: Shannen Durphey <shannen@grolen.com>
• VSS question
  • From: Andrew Choset <agc3@cornell.edu>
• Re: Just a little follow up to LT5 posting
  • From: Shannen Durphey <shannen@grolen.com>
• Got Diacom to work on Snakeskinner
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Shannen Durphey <shannen@grolen.com>
• Re: VSS question
  • From: Mark Romans <romans@pacbell.net>
• Re: VSS question
  • From: "Bruce Plecan" <nacelp@bright.net>
• Uploading Stuff To FTP Incoming
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Hex clue
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: Hex clue
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Syncing crossfire injection
  • From: "Dave Zug" <dzug@delanet.com>
• Re: 1228331 (16157364?)
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: '730 ecu
  • From: Swayze <kswayze@bellsouth.net>
• Re: '730 ecu
  • From: Ludis Langens <ludis@cruzers.com>
• Re: VSS question
  • From: "JN" <jwn@sgi.net>
• Re: '730 ecu
  • From: Swayze <kswayze@bellsouth.net>
• Re: '730 ecu
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Memcals
  • From: Ludis Langens <ludis@cruzers.com>
• Prom burning
  • From: "JN" <jwn@sgi.net>
• Re: '730 ecu
  • From: Swayze <kswayze@bellsouth.net>
• Re: Prom burning
  • From: Rick Lindstedt <rick@mafb.org>
• Re: Memcals
  • From: Swayze <kswayze@bellsouth.net>
• '7429, 2.8tbi v6
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Marc Randolph <mrand@pobox.com>
• Re: .bin file needed..
  • From: Mike Wesley <mwesley@mediaone.net>
• Re: '730 ecu
  • From: "Programmer" <nwester@eidnet.org>
• Re: Prom burning
  • From: "Programmer" <nwester@eidnet.org>
• Re: '730 ecu
  • From: "Programmer" <nwester@eidnet.org>
• Re: Got Diacom to work on Snakeskinner
  • From: Daniel Ciobota <dciobota@hiwaay.net>
• Car bytes newbie question
  • From: Rick Lindstedt <rick@mafb.org>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Ken Kelly <kenkelly@lucent.com>
• Re: Got Diacom to work on Snakeskinner
  • From: Ken Kelly <kenkelly@lucent.com>
• Re: Uploading Stuff To FTP Incoming
  • From: steve ravet <sravet@arm.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Marc Randolph <mrand@pobox.com>
• Re: Got Diacom to work on Snakeskinner
  • From: Daniel Ciobota <dciobota@hiwaay.net>
• Re: Got Diacom to work on Snakeskinner
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Swayze <kswayze@bellsouth.net>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Mark Romans <romans@pacbell.net>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Team ZR1 <teamzr1@teamzr1.com>
• fuel pump for GM TPI
  • From: Vinnie Moscaritolo <vinnie@vmeng.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Swayze <kswayze@bellsouth.net>
• Re: fuel pump for GM TPI
  • From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
• 'Nother pinout needed..
  • From: Shannen Durphey <shannen@grolen.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Got Diacom to work on Snakeskinner
  • From: Shannen Durphey <shannen@grolen.com>
• [ADMIN] Lists are moving!
  • From: Orin Eman <orin@WOLFENET.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: "Bruce Plecan" <nacelp@bright.net>
• New to the list...
  • From: "C and T" <candt@techcom.net>
• Re: fuel pump for GM TPI
  • From: Squash <realsquash@yahoo.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Squash <realsquash@yahoo.com>
• Re: [ADMIN] Lists are moving!
  • From: Shannen Durphey <shannen@grolen.com>
• RE: LT5 Info.., and 1228331 stuff in general.
  • From: "Randy Lyon" <randylyon@home.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Swayze <kswayze@bellsouth.net>
• 454SS Truck ".bin" File
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Swayze <kswayze@bellsouth.net>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Squash <realsquash@yahoo.com>
• Re: Car bytes newbie question
  • From: "Programmer" <nwester@eidnet.org>
• Re: fuel pump for GM TPI
  • From: "Ron Gregory" <syclone@home.com>
• Re: Red Alert, Bin needed
  • From: "Programmer" <nwester@eidnet.org>
• Re: Scantool for '93 4.3L?
  • From: "Programmer" <nwester@eidnet.org>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Team ZR1 <teamzr1@teamzr1.com>
• Re: Red Alert, Bin needed
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: 454SS Truck ".bin" File
  • From: "Mike" <Itsmike@lvcm.com>
• Re: 454SS Truck ".bin" File
  • From: "Programmer" <nwester@eidnet.org>
• Re: Got Diacom to work on Snakeskinner
  • From: Daniel Ciobota <dciobota@hiwaay.net>
• Re: Got Diacom to work on Snakeskinner
  • From: Daniel Ciobota <dciobota@hiwaay.net>
• Re: fuel pump for GM TPI
  • From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
• Re: 'Nother pinout needed..
  • From: cwagner@info2000.net
• Prog 101
  • From: "Todorovic" <todorovic@home.com>
• Re: Prog 101
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Ken Kelly <kenkelly@lucent.com>
• IAT MAT differences
  • From: "Bruce Plecan" <nacelp@bright.net>
• Corvette ECM
  • From: "JN" <jwn@sgi.net>
• 7730v2 ecu file
  • From: cwagner@info2000.net
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Tom Sharpe <twsharpe@mtco.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: "TK" <terryk@foothill.net>
• [ADMIN] test - ignore
  • From: Orin <orin>
• IAC parameters
  • From: Barry Tisdale <btisdale@cybersol.com>
• [admin] test 2
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: "Bruce Plecan" <nacelp@bright.net>
• [ADMIN] The Move
  • From: Orin <orin>
• Re: HOORAY! and bigMaF
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 454SS Truck ".bin" File
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• HOORAY! and bigMaF
  • From: "Dave Zug" <dzug@delanet.com>
• Re: HOORAY! and bigMaF
  • From: "Dave Zug" <dzug@delanet.com>
• 7730v3 ecu file
  • From: cwagner@info2000.net
• Re: [ADMIN] The Move
  • From: steve ravet <sravet@arm.com>
• Re: New to the list...
  • From: steve ravet <sravet@arm.com>
• RE: IAC parameters
  • From: "Jim Sloan" <leroy@sunflower.com>
• Re: IAC parameters
  • From: "Bruce Plecan" <nacelp@bright.net>
• DIS ?????s
  • From: "Bruce Plecan" <nacelp@bright.net>
• 89 Corvette ECM
  • From: "JN" <jwn@sgi.net>
• Re: New to the list...
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: DIS ?????s
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Re: 89 Corvette ECM
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 89 Corvette ECM
  • From: gabe <gellett@earthlink.net>
• Re: 89 Corvette ECM
  • From: "JN" <jwn@sgi.net>
• Re: 89 Corvette ECM
  • From: "JN" <jwn@sgi.net>
• CarBytes v2 toolbar problem
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Knock Sensor Tidbit
  • From: Ludis Langens <ludis@cruzers.com>
• RE: LT5 Info.., and 1228331 stuff in general.
  • From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
• Knock sensor pins
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: 89 Corvette ECM
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: IAT MAT differences
  • From: Scot Sealander <Sealand@clarityconnect.com>
• ftp site
  • From: steve ravet <sravet@arm.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: "TK" <terryk@foothill.net>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: ECMnut@aol.com
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Shannen Durphey <shannen@grolen.com>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: "TK" <terryk@foothill.net>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: IAC parameters
  • From: "Bruce Plecan" <nacelp@bright.net>
• Disguised scan tool
  • From: Shannen Durphey <shannen@grolen.com>
• Re: IAC parameters
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: IAC parameters
  • From: Shannen Durphey <shannen@grolen.com>
• Re: IAC parameters
  • From: Ludis Langens <ludis@cruzers.com>
• Re: IAC parameters
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: IAC parameters
  • From: "Bruce Plecan" <nacelp@bright.net>
• Send pics
  • From: "Mark Huffman" <huffman3@netzero.net>
• RE: Send pics
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Re: LT5 Info.., and 1228331 stuff in general/ KNOCKIN
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Prog 101
  • From: "Todorovic" <todorovic@home.com>
• 7170.ecu help
  • From: James P Hunt <war_machine1@juno.com>
• Knock sensors
  • From: "Geoff Richards" <gerich@one.net.au>
• Re: Knock sensors
  • From: Bob Valentine <bob@tecmark.com>
• Re: 7170.ecu help
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 7170.ecu help
  • From: "TK" <terryk@foothill.net>
• How do I do a quick test of a 730
  • From: "Eric Aos" <Eric@Prototype-Engineering.com>
• Re: How do I do a quick test of a 730
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: How do I do a quick test of a 730
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: How do I do a quick test of a 730
  • From: "Eric Aos" <Eric@Prototype-Engineering.com>
• Re: How do I do a quick test of a 730
  • From: Shannen Durphey <shannen@grolen.com>
• Re: How do I do a quick test of a 730
  • From: "Bruce Plecan" <nacelp@bright.net>
• TGB Adaptation Help?
  • From: Rex Weatherford <rex.weatherford@terraglyph.com>
• Re: TGB Adaptation Help?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Squash <realsquash@yahoo.com>
• TB Adaptation Help?
  • From: Rex Weatherford <rex.weatherford@terraglyph.com>
• RE: TGB Adaptation Help?
  • From: ronald.j.selberg@exgate.tek.com
• Crossfire SES driver & 7747
  • From: "Kevin Reynolds" <kereyn@gte.net>
• 7148 -> 7783 table locs
  • From: "Patrick G. Moore" <pmoore@cmr.gov>
• TPI Vacuum at idle
  • From: gabe <gellett@earthlink.net>
• Re: 7170.ecu help
  • From: James P Hunt <war_machine1@juno.com>
• RE: 7170.ecu help
  • From: Carl Summers <InTech@writeme.com>
• 88 quad-4
  • From: cwagner@info2000.net
• Re: 7148 -> 7783 table locs
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Crossfire SES driver & 7747
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: TGB Adaptation Help?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 88 quad-4
  • From: Shannen Durphey <shannen@grolen.com>
• More user friendly, please..
  • From: Shannen Durphey <shannen@grolen.com>
• Bin Needed
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: TGB Adaptation Help?
  • From: Bja1078@aol.com
• Re: TPI Vacuum at idle
  • From: "Craig Moates" <craig.moates@home.com>
• Re: TPI Vacuum at idle
  • From: Bja1078@aol.com
• Re: 7148 -> 7783 table locs
  • From: JTesta1966@aol.com
• RE: TGB Adaptation Help?
  • From: ronald.j.selberg@exgate.tek.com
• Re: LT5 Info.., and 1228331 stuff in general.
  • From: Tom Sharpe <twsharpe@mtco.com>
• Re: TGB Adaptation Help?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 88 quad-4
  • From: ECMnut@aol.com
• Re: 88 quad-4
  • From: cwagner@info2000.net
• Re: Bin Needed
  • From: "TK" <terryk@foothill.net>
• Re: 88 quad-4
  • From: cwagner@info2000.net
• Re: 88 quad-4
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 88 quad-4
  • From: ECMnut@aol.com
• Re: 88 quad-4
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 88 quad-4
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 88 quad-4
  • From: ECMnut@aol.com
• RE: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
  • From: "Michael Adams" <michaeladams1@compuserve.com>
• Re: 88 quad-4
  • From: ECMnut@aol.com
• Sorry for Mis-Post Re: Oil
  • From: "Michael Adams" <michaeladams1@compuserve.com>
• Mobil1 vs. Non-Synthetic vs. Red Line?
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: 88 quad-4
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
  • From: "Craig Moates" <craig.moates@home.com>
• Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 88 quad-4
  • From: Richard Wakeling <kojab@ar.com.au>
• Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
  • From: PAULMARKAD@aol.com
• Re: 88 quad-4
  • From: cwagner@info2000.net
• Re: 88 quad-4
  • From: cwagner@info2000.net
• Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: 88 quad-4
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 88 quad-4
  • From: Shannen Durphey <shannen@grolen.com>
• Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Too tired, correction to Re: 88 quad-4
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 88 quad-4
  • From: cwagner@info2000.net
• Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
  • From: "C and T" <candt@techcom.net>
• Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
  • From: Bob Valentine <bob@tecmark.com>
• Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
  • From: Mark Romans <romans@pacbell.net>
• RE: 7747 "shaking" the vechile?!
  • From: Mika.Helander@softbit.fi
• Re: More user friendly, please..
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
  • From: "Dave Zug" <dzug@delanet.com>
• Northstar DIS
  • From: Scott Knight <scott@scottknight.com>
• Re: 88 quad-4
  • From: ECMnut@aol.com
• Re: TPI Vacuum at idle
  • From: frels@rosharon.camco.slb.com (Mike Frels)
• Re: TPI Vacuum at idle
  • From: gabe <gellett@earthlink.net>
• Re: TPI Vacuum at idle
  • From: "Bruce & Lisa Wilcox" <wilcoxbl@gte.net>
• Re: Disguised scan tool
  • From: steve ravet <sravet@arm.com>
• RE: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 88 quad-4
  • From: cwagner@info2000.net
• Re: 88 quad-4
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Fw: Water injection (tech refs)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Greddy air-fuel ratio meter
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Greddy air-fuel ratio meter
  • From: "Patrick G. Moore" <pmoore@cmr.gov>
• Re: Greddy air-fuel ratio meter
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: 88 quad-4
  • From: Richard Wakeling <kojab@ar.com.au>
• Re: Greddy air-fuel ratio meter
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: Greddy air-fuel ratio meter
  • From: Frank F Parker <fparker@umich.edu>
• Re: Memcals
  • From: "Swayze" <kswayze@bellsouth.net>
• 3.1L turbo vin V schematics uploaded
  • From: steve ravet <sravet@arm.com>
• new to list and question
  • From: "Charles A. Fair" <chuck@italymail.com>
• Re: Greddy air-fuel ratio meter
  • From: bearbvd@cmn.net (Greg Hermann)
• RE: 3.1L turbo vin V schematics uploaded
  • From: ronald.j.selberg@exgate.tek.com
• Re: 3.1L turbo vin V schematics uploaded
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: 3.1L turbo vin V schematics uploaded
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: Memcals
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 88 quad-4
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 3.1L turbo vin V schematics uploaded
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: 3.1L turbo vin V schematics uploaded
  • From: ronald.j.selberg@exgate.tek.com
• Re: Disguised scan tool
  • From: Shannen Durphey <shannen@grolen.com>
• Re: new to list and question
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Northstar DIS
  • From: Bja1078@aol.com
• Re: Northstar DIS
  • From: Shannen Durphey <shannen@grolen.com>
• RE: Northstar DIS
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Re: Crossfire SES driver & 7747
  • From: "Kevin Reynolds" <kereyn@gte.net>
• [no subject]
  • From: "Mike Rolica" <97005620@lambton.on.ca>
• Re: Crossfire SES driver & 7747
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Northstar DIS
  • From: "Bruce Plecan" <nacelp@bright.net>
• Crossfire mod.. plenum volume or enlarged TBIs first?
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Northstar DIS
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 88 quad-4
  • From: "Programmer" <nwester@eidnet.org>
• Re: Crossfire SES driver & 7747
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Crossfire mod.. plenum volume or enlarged TBIs first?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Crossfire SES driver & 7747
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Greddy air-fuel ratio meter
  • From: Carl Summers <InTech@writeme.com>
• Re: Greddy air-fuel ratio meter
  • From: "Bruce Plecan" <nacelp@bright.net>
• Anyone have a burner, eraser, or eproms they want to sell?
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
  • From: Tom Sharpe <twsharpe@mtco.com>
• Re: Greddy air-fuel ratio meter
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 3.1L turbo vin V schematics uploaded
  • From: "TK" <terryk@foothill.net>
• Re: 88 quad-4
  • From: cwagner@info2000.net
• Re: Greddy air-fuel ratio meter
  • From: "C and T" <candt@techcom.net>
• Re: Greddy air-fuel ratio meter
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: 88 quad-4
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Greddy air-fuel ratio meter
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Northstar DIS
  • From: Bja1078@aol.com
• Re: Northstar DIS
  • From: Bja1078@aol.com
• Re: Crossfire mod.. plenum volume or enlarged TBIs first?
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Disguised scan tool
  • From: Bja1078@aol.com
• Re: Greddy air-fuel ratio meter
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: 88 quad-4
  • From: cwagner@info2000.net
• Re: Crossfire SES driver & 7747
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Crossfire mod.. plenum volume or enlarged TBIs first?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Crossfire SES driver & 7747
  • From: "Bruce Plecan" <nacelp@bright.net>
• Public Thanks
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Northstar DIS
  • From: "Bruce Plecan" <nacelp@bright.net>
• Question from newbie
  • From: "JN" <jwn@sgi.net>
• Re: Question from newbie
  • From: ECMnut@aol.com
• Re: Question from newbie
  • From: "Bruce Plecan" <nacelp@bright.net>
• archives
  • From: "Robert W. Hughes" <rwhughe@ev1.net>
• Re: Crossfire mod.. plenum volume or enlarged TBIs first?
  • From: Brent Obermiller <ober_b@sssnet.com>
• Carputing software
  • From: "Programmer" <nwester@eidnet.org>
• Re: Archives? [was Greddy air-fuel ratio meter]
  • From: Rex Weatherford <rex.weatherford@terraglyph.com>
• Quad 4 .bin file
  • From: ronald.j.selberg@exgate.tek.com
• RE: Crossfire mod.. plenum volume or enlarged TBIs first?
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: Archives? [was Greddy air-fuel ratio meter]
  • From: "Patrick G. Moore" <pmoore@cmr.gov>
• RE: Crossfire mod.. plenum volume or enlarged TBIs first?
  • From: Squash <realsquash@yahoo.com>
• RE: Crossfire mod.. plenum volume or enlarged TBIs first?
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: Archives? [was Greddy air-fuel ratio meter]
  • From: Rex Weatherford <rex.weatherford@terraglyph.com>
• Re: Crossfire SES driver & 7747
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Crossfire mod.. plenum volume or enlarged TBIs first?
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Crossfire mod.. plenum volume or enlarged TBIs first?
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Archives? [was Greddy air-fuel ratio meter]
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: 88 quad-4
  • From: "Charles A. Fair" <chuck@italymail.com>
• Re: Quad 4 .bin file
  • From: Richard Wakeling <kojab@ar.com.au>
• Re: new to list and question
  • From: "Charles A. Fair" <chuck@italymail.com>
• Re: Memcals
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Memcals
  • From: Pat Ford <pford@qnx.com>
• Re: Memcals
  • From: "Swayze" <kswayze@bellsouth.net>
• EFI332 Archives
  • From: "Robert W. Hughes" <rwhughe@ev1.net>
• Re: 88 quad-4
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Crossfire mod.. plenum volume or enlarged TBIs first?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
  • From: Richard Wakeling <kojab@ar.com.au>
• Re: Crossfire mod.. plenum volume or enlarged TBIs first?
  • From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
• Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Crossfire mod.. plenum volume or enlarged TBIs first?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
  • From: Bob Valentine <bob@tecmark.com>
• Re: 88 quad-4
  • From: "Charles A. Fair" <chuck@italymail.com>
• Re: 88 quad-4
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 88 quad-4
  • From: "Charles A. Fair" <chuck@italymail.com>
• Re: Memcals
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: Carputing software
  • From: "Programmer" <nwester@eidnet.org>
• Re: Memcals
  • From: "Swayze" <kswayze@bellsouth.net>
• newbie question
  • From: "John LeBlanc" <jleblanc@malcams.com>
• 1227165 Questions
  • From: "JN" <jwn@sgi.net>
• Re: 1227165 Questions
  • From: ECMnut@aol.com
• Re: 1227165 Questions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1227165 Questions
  • From: gabe <gellett@spam.net>
• Re: 1227165 Questions
  • From: "JN" <jwn@sgi.net>
• Re: 1227165 Questions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1227165 Questions
  • From: Roger Heflin <rah@horizon.hit.net>
• Any broken ECM's out there?
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Attn. Richard
  • From: ronald.j.selberg@exgate.tek.com
• Re: Any broken ECM's out there?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Any broken ECM's out there?
  • From: ECMnut@aol.com
• Tech 1 Questions
  • From: Richard Wakeling <kojab@ar.com.au>
• Lost at CSH, HQ
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Northstar DIS
  • From: Bja1078@aol.com
• Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
  • From: Bja1078@aol.com
• Re: Lost at CSH, HQ
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Northstar DIS
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Northstar DIS
  • From: Scott Knight <scott@scottknight.com>
• Re: Lost at CSH, HQ
  • From: "Bruce Plecan" <nacelp@bright.net>
• 727+LT1Conectr.jpg
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Northstar DIS
  • From: Bja1078@aol.com
• Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
  • From: Bja1078@aol.com
• Too hot 7805
  • From: "Bruce Plecan" <nacelp@bright.net>
• Adapting GM ECM to Chrysler Turbo
  • From: Thomas McCabe <mccabet@mediaone.net>
• Re: Adapting GM ECM to Chrysler Turbo
  • From: ECMnut@aol.com
• Confuzin signals
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Confuzin signals
  • From: Mika.Helander@softbit.fi
• RE: Too hot 7805
  • From: Mika.Helander@softbit.fi
• Re: Too hot 7805
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Too hot 7805
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Too hot 7805
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• RE: Too hot 7805
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• RE: Too hot 7805
  • From: Don.F.Broadus@ucm.com
• RE: Lost at CSH, HQ
  • From: Don.F.Broadus@ucm.com
• Re: Too hot 7805
  • From: Barry Tisdale <btisdale@cybersol.com>
• RE: Too hot 7805
  • From: "Sam Stratton" <transamsam@hotmail.com>
• Re: Too hot 7805
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: Too hot 7805
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: Adapting GM ECM to Chrysler Turbo
  • From: "Programmer" <nwester@eidnet.org>
• Re: Too hot 7805
  • From: Ludis Langens <ludis@cruzers.com>
• IAC Orifice Data
  • From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
• Re: 88 quad-4
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
  • From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
• Oil Filters
  • From: "Dave Zug." <dzug@delanet.com>
• Dribbles, and drabbles yes EFI
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Dribbles, and drabbles yes EFI
  • From: Squash <realsquash@yahoo.com>
• Re: Dribbles, and drabbles yes EFI
  • From: Ward <WSpoonemore@excite.com>
• Re: Dribbles, and drabbles yes EFI
  • From: "Bruce Plecan" <nacelp@bright.net>
• High Freq MAF Problem
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Dribbles, and drabbles yes EFI
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Dribbles, and drabbles yes EFI
  • From: rr <RRauscher@nni.com>
• Re: 7170.ecu help
  • From: James P Hunt <war_machine1@juno.com>
• Re: Too hot 7805
  • From: Bill Shaw <bshaw@connix.com>
• Re: Tech 1 Questions
  • From: "Geoff Richards" <gerich@one.net.au>
• Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Dribbles, and drabbles yes EFI
  • From: Tom Sharpe <twsharpe@mtco.com>
• Re: High Freq MAF Problem
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: Adapting GM ECM to Chrysler Turbo
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: Adapting GM ECM to Chrysler Turbo
  • From: Thomas McCabe <mccabet@mediaone.net>
• Re: Too hot 7805
  • From: "Bruce Plecan" <nacelp@bright.net>
• Dribbles, and drabbles yes EFI
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: Adapting GM ECM to Chrysler Turbo
  • From: "Programmer" <nwester@eidnet.org>
• Re: High Freq MAF Problem
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Dribbles, and drabbles yes EFI
  • From: Squash <realsquash@yahoo.com>
• Re: Dribbles, and drabbles yes EFI
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: High Freq MAF Problem
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: High Freq MAF Problem
  • From: Scot Sealander <Sealand@clarityconnect.com>
• V-Maf Differences for Part #s
  • From: "Dave Zug." <dzug@delanet.com>
• Re: Memcals
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: Dribbles, and drabbles yes EFI
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: V-Maf Differences for Part #s
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Memcals
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: Too hot 7805
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Memcals
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Memcals
  • From: "Bruce Plecan" <nacelp@bright.net>
• DIS ????
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Memcals
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: High Freq MAF Problem
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: more.. DIS ????
  • From: Shannen Durphey <shannen@grolen.com>
• Re: DIS ????
  • From: thergen@svn.net
• Re: Adapting GM ECM to Chrysler Turbo
  • From: Thomas McCabe <mccabet@mediaone.net>
• Re: V-Maf Differences for Part #s
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: V-Maf Differences for Part #s
  • From: Gabe <gellett@earthlink.net>
• Re: DIS ????
  • From: thergen@svn.net
• Re: V-Maf Differences for Part #s
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Dribbles, and drabbles yes EFI
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: V-Maf Differences for Part #s
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Dribbles, and drabbles yes EFI
  • From: "Dave Zug" <dzug@delanet.com>
• New Member here
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: New Member here
  • From: "nacelp" <nacelp@bright.net>
• Re: New Member here
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: V-Maf Differences for Part #s
  • From: Mark Romans <romans@pacbell.net>
• Re: New Member here
  • From: "nacelp" <nacelp@bright.net>
• Re: New Member here
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: EFI - Terminology and acronyms
  • From: "nacelp" <nacelp@bright.net>
• Re: New Member here
  • From: "nacelp" <nacelp@bright.net>
• Questions about chips
  • From: FstAssBlzr@aol.com
• Re: V-Maf Differences for Part #s
  • From: "Dave Zug" <dzug@delanet.com>
• Re: V-Maf Differences for Part #s
  • From: "Dave Zug." <dzug@delanet.com>
• Re: Greddy air-fuel ratio meter, really ALDL messages
  • From: Dave Hempstead <dave_hempstead@agilent.com>
• Re: DIS ????
  • From: Pat Ford <pford@qnx.com>
• EFI - Terminology and acronyms
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Re: 2 bar map sensor
  • From: steve ravet <sravet@arm.com>
• Re: EFI - Terminology and acronyms
  • From: steve ravet <sravet@arm.com>
• New Member, LT1 Questions
  • From: Dave Plummer <davepl@MICROSOFT.com>
• Re: New Member, LT1 Questions
  • From: Bja1078@aol.com
• Re: New Maf, a thought
  • From: "Peter Fenske" <Peter_Fenske@bcit.ca>
• Re: DIY-EFI.ORG (was re: 2 bar map sensor)
  • From: Shannen Durphey <shannen@grolen.com>
• Greetings from a "new" member
  • From: Dig <turbodig@usa.net>
• MAF to MAP (speed density)
  • From: "Programmer" <nwester@eidnet.org>
• DIS-- Some Success
  • From: "nacelp" <nacelp@bright.net>
• Re: New Member, LT1 Questions
  • From: Glen Beard <gbeard1@nycap.rr.com>
• Re: New Member, LT1 Questions
  • From: "Dave Plummer" <davepl@MICROSOFT.com>
• Re: Greetings from a "new" member
  • From: "nacelp" <nacelp@bright.net>
• Re: Greetings from a "new" member
  • From: ECMnut@aol.com
• Re: New Member, LT1 Questions
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Greetings from a "new" member
  • From: "Dave Zug" <dzug@delanet.com>
• Re: New Member, LT1 Questions
  • From: "Peter Fenske" <Peter_Fenske@bcit.ca>
• RE: DIS ????
  • From: "Igor" <brease@public.kharkov.ua>
• Re: Adapting GM ECM to Chrysler Turbo
  • From: "Programmer" <nwester@eidnet.org>
• Archives
  • From: "Programmer" <nwester@eidnet.org>
• Greetings from a "new" member
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: New Member, LT1 Questions
  • From: Ken Kelly <kenkelly@lucent.com>
• Re: When asking ecm questions
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: DIS ????
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Auto learn code-Where?
  • From: "Jeff M" <tystorm@email.msn.com>
• Injector sizes?
  • From: Rex Weatherford <rex.weatherford@terraglyph.com>
• Re: Greetings from a "new" member
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Auto learn code-Where?
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: DIS ????
  • From: "nacelp" <nacelp@bright.net>
• Re: Archives
  • From: "nacelp" <nacelp@bright.net>
• Re: Auto learn code-Where?
  • From: "Jeff M" <tystorm@email.msn.com>
• test, delete please
  • From: kgil1@tampabay.rr.com
• Recommended books for burning???
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Greetings from a "new" member
  • From: "nacelp" <nacelp@bright.net>
• Wide band o2
  • From: "Jeff M" <tystorm@email.msn.com>
• Delta ?
  • From: "Geoff Richards" <gerich@one.net.au>
• Fw: LT1 with boost.
  • From: "nacelp" <nacelp@bright.net>
• RE: Recommended books for burning???
  • From: Dave Plummer <davepl@MICROSOFT.com>
• RE: LT1 with boost.
  • From: Dave Plummer <davepl@MICROSOFT.com>
• Re: Wide band o2
  • From: Frank F Parker <fparker@umich.edu>
• Re: Archives
  • From: "Programmer" <nwester@eidnet.org>
• Re: Tuning, was High Freq MAF Problem
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Archives
  • From: "nacelp" <nacelp@bright.net>
• Re: Maf to Map again
  • From: "Peter Fenske" <Peter_Fenske@bcit.ca>
• Re: [Re: Greetings from a "new" member]
  • From: Dig <turbodig@usa.net>
• Re: Wide band o2
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: Wide band o2
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: Auto learn code-Where?
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Can anybody Identify these Components
  • From: Richard Wakeling <kojab@ar.com.au>
• Re: Maf to Map again
  • From: "nacelp" <nacelp@bright.net>
• Re: LT1 with boost.
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Injector sizes?
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: Maf to Map again
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Maf to Map again
  • From: thergen@svn.net
• Re: Maf to Map again
  • From: thergen@svn.net
• Re: DIY-EFI.ORG (was re: 2 bar map sensor)
  • From: steve ravet <sravet@arm.com>
• Re: Auto learn code-Where?
  • From: Tom Sharpe <twsharpe@mtco.com>
• Re: Auto learn code-Where?
  • From: Tom Sharpe <twsharpe@mtco.com>
• Re: Maf to Map again
  • From: Ludis Langens <ludis@cruzers.com>
• Newbie questions and intro.
  • From: Keith <kgil1@tampabay.rr.com>
• Re: Recommended books for burning???
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: Injector sizes?
  • From: Bob Valentine <bob@tecmark.com>
• Re: Maf to Map again
  • From: JTesta1966@aol.com
• RE: Can anybody Identify these Components
  • From: Don.F.Broadus@ucm.com
• Re: Maf to Map again
  • From: "Programmer" <nwester@eidnet.org>
• Re: Maf to Map again
  • From: Ludis Langens <ludis@cruzers.com>
• Re: EFI - Terminology and acronyms
  • From: gabe <gellett@earthlink.net>
• Re: Maf to Map again
  • From: Rick Lindstedt <rick@mafb.org>
• Re: Maf to Map again
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: Maf to Map again
  • From: Rick Lindstedt <rick@mafb.org>
• Re: Wide band o2
  • From: "Jeff M" <tystorm@email.msn.com>
• Using 28F256 in a 747 instead of 2732A??????????
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Using 28F256 in a 747 instead of 2732A??????????
  • From: Squash <realsquash@yahoo.com>
• EPROM Burner (Modular Circuit Technology, MOD-MEP-1C) F.S.
  • From: Keith <kgil1@tampabay.rr.com>
• Re: Maf to Map again
  • From: "nacelp" <nacelp@bright.net>
• Re: Maf to Map again
  • From: "nacelp" <nacelp@bright.net>
• Crossfire injectors.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Crossfire injectors.
  • From: "nacelp" <nacelp@bright.net>
• Re: Crossfire injectors.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Using 28F256 in a 747 instead of 2732A??????????
  • From: Richard Wakeling <kojab@ar.com.au>
• Re: Delta ?
  • From: Marc Randolph <mrand@pobox.com>
• Re: Using 28F256 in a 747 instead of 2732A??????????
  • From: Shawn Lin <slin01@mail.orion.org>
• Audible knock detectors
  • From: Dave Plummer <davepl@MICROSOFT.com>
• Re: Using 28F256 in a 747 instead of 2732A??????????
  • From: "nacelp" <nacelp@bright.net>
• Re: Audible knock detectors
  • From: "nacelp" <nacelp@bright.net>
• Re: Using 28F256 in a 747 instead of 2732A??????????
  • From: Shawn Lin <slin01@mail.orion.org>
• Re: Audible knock detectors
  • From: "C. Brooks" <cbrooks1@tqci.net>
• Re: Maf to Map again
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Using 28F256 in a 747 instead of 2732A??????????
  • From: "nacelp" <nacelp@bright.net>
• Re: Using 28F256 in a 747 instead of 2732A??????????
  • From: Richard Wakeling <kojab@ar.com.au>
• RE: Audible knock detectors
  • From: Dave Plummer <davepl@MICROSOFT.com>
• Re: Using 28F256 in a 747 instead of 2732A??????????
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: Adapting GM ECM to Chrysler Turbo
  • From: Thomas McCabe <mccabet@mediaone.net>
• Re: Audible knock detectors
  • From: "C. Brooks" <cbrooks1@tqci.net>
• Re: Wide band o2
  • From: Frank F Parker <fparker@umich.edu>
• Re: Audible knock detectors
  • From: Mike Wesley <mwesley@mediaone.net>
• MAF and Calculated VE
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Big Injectors
  • From: ECMnut@aol.com
• Re: Audible knock detectors
  • From: "C and T" <candt@techcom.net>
• Re: Big Injectors
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Maf to Map again
  • From: "Programmer" <nwester@eidnet.org>
• Re: Delta ?
  • From: JTesta1966@aol.com
• Big Injectors
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: Big Injectors
  • From: "nacelp" <nacelp@bright.net>
• Re: Adapting GM ECM to Chrysler Turbo
  • From: "Programmer" <nwester@eidnet.org>
• Re: MAF and Calculated VE
  • From: "nacelp" <nacelp@bright.net>
• 2732As any recommended speed or brand?
  • From: "Kevin Reynolds" <kereyn@gte.net>
• RE: Delta ?
  • From: "Geoff Richards" <gerich@one.net.au>
• Re: Using 28F256 in a 747 instead of 2732A??????????
  • From: Bob Valentine <bob@tecmark.com>
• RE: Using 28F256 in a 747 instead of 2732A??????????
  • From: Mika.Helander@softbit.fi
• Re: Delta ?
  • From: "Dave Zug" <dzug@delanet.com>
• Application for ASMJ Broadcast code
  • From: "James Wilson" <Wilson.James4@worldnet.att.net>
• Re: Delta ?
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Using 28F256 in a 747 instead of 2732A??????????
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: Using 28F256 in a 747 instead of 2732A??????????
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: Using 28F256 in a 747 instead of 2732A??????????
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: 2732As any recommended speed or brand?
  • From: JTesta1966@aol.com
• Re: 2732As any recommended speed or brand?
  • From: ECMnut@aol.com
• Re: Crossfire injectors.
  • From: Nico Over <nicomax@erols.com>
• Re: 2732As any recommended speed or brand?
  • From: ECMnut@aol.com
• Re: 2732As any recommended speed or brand?
  • From: JTesta1966@aol.com
• Re: Delta ?
  • From: Scott Knight <scott@scottknight.com>
• Re: 2732As any recommended speed or brand?
  • From: "nacelp" <nacelp@bright.net>
• Re: Application for ASMJ Broadcast code
  • From: "nacelp" <nacelp@bright.net>
• Re: New Member, LT1 Questions
  • From: Chipsbyal@aol.com
• RE: Crossfire injectors.
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: New Member, LT1 Questions
  • From: "nacelp" <nacelp@bright.net>
• Re: Crossfire injectors.
  • From: Nico Over <nicomax@erols.com>
• Re: [Re: Using 28F256 in a 747 instead of 2732A??????????]
  • From: Dig <turbodig@usa.net>
• GM training manuals
  • From: steve ravet <sravet@arm.com>
• Re: New Member, LT1 Questions/50-55 ponders
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Crossfire injectors.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Using 28F256 in a 747 instead of 2732A??????????
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: Application for ASMJ Broadcast code
  • From: "James Wilson" <Wilson.James4@worldnet.att.net>
• Re: Application for ASMJ Broadcast code
  • From: Ludis Langens <ludis@cruzers.com>
• Re: [Re: Using 28F256 in a 747 instead of 2732A??????????]
  • From: Ludis Langens <ludis@cruzers.com>
• For DIG, no EFI
  • From: "nacelp" <nacelp@bright.net>
• RE: Crossfire injectors.
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: Crossfire injectors.
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: Crossfire injectors.
  • From: "nacelp" <nacelp@bright.net>
• Re: Application for ASMJ Broadcast code
  • From: "Programmer" <nwester@eidnet.org>
• RE: 2 bar map sensor
  • From: "Michael Adams" <michaeladams1@compuserve.com>
• Re: 2732As any recommended speed or brand?
  • From: "Programmer" <nwester@eidnet.org>
• Re: 2732As any recommended speed or brand?
  • From: "Programmer" <nwester@eidnet.org>
• Re: 2 bar map sensor
  • From: "nacelp" <nacelp@bright.net>
• Re: MAF and Calculated VE
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Ignition timing question
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: [Re: [Re: Using 28F256 in a 747 instead of 2732A??????????]]
  • From: Dig <turbodig@usa.net>
• '165 ACWS
  • From: Bob Valentine <bob@tecmark.com>
• Hyp 87 Vette chip EBAY
  • From: "Dave Zug" <dzug@delanet.com>
• RE: 2 bar map sensor
  • From: "Michael Adams" <michaeladams1@compuserve.com>
• GM training manuals
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: Ignition timing question
  • From: "nacelp" <nacelp@bright.net>
• Re: '165 ACWS
  • From: "nacelp" <nacelp@bright.net>
• Re: 2 bar map sensor
  • From: ECMnut@aol.com
• RE: 2 bar map sensor
  • From: John_Calabrese@ENGELHARD.COM
• RE: 2 bar map sensor
  • From: Squash <realsquash@yahoo.com>
• Re: 2 bar map sensor
  • From: Rex Weatherford <rex.weatherford@terraglyph.com>
• Re: 2 bar map sensor
  • From: steve ravet <sravet@arm.com>
• EPROM -> NVRAM, ALDL mode-11
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: Ignition timing question
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Audible knock detectors
  • From: "Jeff M" <tystorm@email.msn.com>
• syclone bin
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• RE: 2 bar map sensor
  • From: John_Calabrese@ENGELHARD.COM
• Re: 2 bar map sensor
  • From: John_Calabrese@ENGELHARD.COM
• Timing, revisited....
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: E85 Trucks
  • From: Rex Weatherford <rex.weatherford@terraglyph.com>
• Re: 2 bar map sensor
  • From: Mark Romans <romans@pacbell.net>
• Re: [syclone bin]
  • From: Dig <turbodig@usa.net>
• Rev Limiter
  • From: Squash <realsquash@yahoo.com>
• Re: Application for ASMJ Broadcast code
  • From: Ludis Langens <ludis@cruzers.com>
• Re: [Re: [Re: Using 28F256 in a 747 instead of 2732A??????????]]
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Crossfire injectors.
  • From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
• Re: [syclone bin]
  • From: steve ravet <sravet@arm.com>
• Re: Timing, revisited....
  • From: "nacelp" <nacelp@bright.net>
• Re: Crossfire injectors.
  • From: "nacelp" <nacelp@bright.net>
• Performance Parts
  • From: Carl Summers <InTech@writeme.com>
• Re: Crossfire injectors.
  • From: John_Calabrese@ENGELHARD.COM
• Re: Rev Limiter
  • From: John_Calabrese@ENGELHARD.COM
• Re: Application for ASMJ Broadcast code
  • From: "Programmer" <nwester@eidnet.org>
• Re: Crossfire injectors.
  • From: "nacelp" <nacelp@bright.net>
• Re: [Re: [syclone bin]]
  • From: Dig <turbodig@usa.net>
• Re: Performance Parts
  • From: "Jason Bonie" <jabonie@hotmail.com>
• Re: MAF and Calculated VE
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: MAF and Calculated VE
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: 2 bar map sensor
  • From: ECMnut@aol.com
• RE: Performance Parts
  • From: Carl Summers <InTech@writeme.com>
• '165 to '730
  • From: Davis <davis@mail.eecis.udel.edu>
• Re: '165 to '730
  • From: Davis <davis@mail.eecis.udel.edu>
• Re: Timing, revisited....
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: '165 to '730
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: '165 to '730
  • From: "Todd Osterbrink" <toddo@dwave.net>
• Re: '165 to '730
  • From: "nacelp" <nacelp@bright.net>
• rats! vats!
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: '165 to '730
  • From: "Dave Zug" <dzug@delanet.com>
• VATS elimination
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Does anyone have an ALD file for a 730?
  • From: "Eric Aos" <Eric@Prototype-Engineering.com>
• Re: Does anyone have an ALD file for a 730?
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: Crossfire injectors.
  • From: Shannen Durphey <shannen@grolen.com>
• Re: VATS elimination
  • From: "James Wilson" <Wilson.James4@worldnet.att.net>
• Re: injectors --- > liquidation
  • From: Shannen Durphey <shannen@grolen.com>
• RE: Does anyone have an ALD file for a 730?
  • From: "Eric Aos" <Eric@Prototype-Engineering.com>
• Re: rats! vats!
  • From: PCMdoc <PCMdoc@surfree.com>
• Re: Reading/Study Material EFI
  • From: kgil1@tampabay.rr.com
• Re: '165 to '730
  • From: "Dave Zug" <dzug@delanet.com>
• Re: '165 to '730
  • From: "Programmer" <nwester@eidnet.org>
• Re: Crossfire injectors.
  • From: "Programmer" <nwester@eidnet.org>
• xfire injectors now gas tanks
  • From: "nacelp" <nacelp@bright.net>
• Re: Crossfire injectors.
  • From: Barry Tisdale <btisdale@cybersol.com>
• Tools that work
  • From: "nacelp" <nacelp@bright.net>
• Reading/Study Material EFI
  • From: "nacelp" <nacelp@bright.net>
• EFI (NC) and tool selection
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: Tools that work
  • From: "C. Brooks" <cbrooks1@tqci.net>
• harness special
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: harness special
  • From: "nacelp" <nacelp@bright.net>
• LO3 TBI Total timing advance, how much?
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Tools that work
  • From: "nacelp" <nacelp@bright.net>
• Re: EFI (NC) and tool selection
  • From: "nacelp" <nacelp@bright.net>
• Re: LO3 TBI Total timing advance, how much?
  • From: "nacelp" <nacelp@bright.net>
• Re: LO3 TBI Total timing advance, how much?
  • From: olbap <olbap@mail.mia.bellsouth.net>
• TBI injector flow vs pressure and demand
  • From: olbap <olbap@mail.mia.bellsouth.net>
• WTB '730 & MEMCAL. Was '165 to '730
  • From: Davis <davis@mail.eecis.udel.edu>
• DP Ram Emulator...
  • From: "Eric Aos" <Eric@Prototype-Engineering.com>
• Re: LO3 TBI Total timing advance, how much?
  • From: "nacelp" <nacelp@bright.net>
• Re: WTB '730 & MEMCAL. Was '165 to '730
  • From: "nacelp" <nacelp@bright.net>
• Re: xfire injectors now gas tanks
  • From: "Programmer" <nwester@eidnet.org>
• Weather proofing electronics.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• How to identify eprom
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: How to identify eprom
  • From: "nacelp" <nacelp@bright.net>
• Re: rats! vats!
  • From: "nacelp" <nacelp@bright.net>
• Re: harness special
  • From: BBBDLGCON@aol.com
• Re: How to identify eprom
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• GM ZZ4 chip ?
  • From: "C and T" <candt@techcom.net>
• Re: GM ZZ4 chip ?
  • From: "nacelp" <nacelp@bright.net>
• Re: the GN [no EFI]
  • From: "nacelp" <nacelp@bright.net>
• RE: the GN [no EFI]
  • From: "the Fredericks" <fredericksk@worldnet.att.net>
• Re: xfire injectors now gas tanks
  • From: Qeskimeaux@aol.com
• Re: the GN [no EFI]
  • From: "Dave Zug" <dzug@delanet.com>
• 727,730,injectors
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: the GN [no EFI]
  • From: ECMnut@aol.com
• Re: Reading/Study Material EFI
  • From: Squash <realsquash@yahoo.com>
• Re: How to identify eprom
  • From: Chipsbyal@aol.com
• X-Ram Crossfire intake
  • From: Chipsbyal@aol.com
• Re: How to identify eprom
  • From: "nacelp" <nacelp@bright.net>
• Re: 727,730,injectors Injector drivers
  • From: "nacelp" <nacelp@bright.net>
• Re: X-Ram Crossfire intake
  • From: "nacelp" <nacelp@bright.net>
• GM ECM transplant or fuel enrichment
  • From: Jon Watts <jonwatts@yahoo.com>
• Re: DP Ram Emulator...
  • From: Bja1078@aol.com
• Re: GM ECM transplant or fuel enrichment
  • From: "nacelp" <nacelp@bright.net>
• To the HC11 Number Gurus
  • From: Andrew Wakeling <kojab@ar.com.au>
• Group purchase of harness- was Re: harness special
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: How to identify eprom
  • From: "nacelp" <nacelp@bright.net>
• Re: GM ECM transplant or fuel enrichment
  • From: Jon Watts <jonwatts@yahoo.com>
• Re: GM ECM transplant or fuel enrichment
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Group purchase of harness- was Re: harness special
  • From: Ludis Langens <ludis@cruzers.com>
• Re: DP Ram Emulator...
  • From: Ludis Langens <ludis@cruzers.com>
• Re: To the HC11 Number Gurus
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Group purchase of harness- was Re: harness special
  • From: Shannen Durphey <shannen@grolen.com>
• RE: Group purchase of harness- was Re: harness special
  • From: Carl Summers <InTech@writeme.com>
• Re: 727,730,injectors Injector drivers
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Group purchase of harness- was Re: harness special
  • From: Nico Over <nicomax@erols.com>
• RE: Weather proofing electronics.
  • From: Carl Summers <InTech@writeme.com>
• Re: Tools that work
  • From: JTesta1966@aol.com
• RE: X-Ram Crossfire intake
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: injectors --- > liquidation
  • From: "JN" <jwn@sgi.net>
• Re: Crossfire injectors.
  • From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
• Re: Does anyone have an ALD file for a 730?
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Re: Crossfire injectors.
  • From: Steve Ciciora <ciciora@edison.chisp.net>
• Re: LM3914???
  • From: clive@problem.org (Clive Apps - 510-0020 )
• LM3914???
  • From: John_Calabrese@ENGELHARD.COM
• Re: Crossfire injectors.
  • From: Squash <realsquash@yahoo.com>
• RE: LM3914???
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: LM3914???
  • From: John_Calabrese@ENGELHARD.COM
• RE: LM3914???
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Re: Group purchase of harness- was Re: harness special
  • From: Mark Romans <romans@pacbell.net>
• RE: LM3914???
  • From: Ernst denBroeder <edenbroe@cisco.com>
• LM3914 jameco part #
  • From: John_Calabrese@ENGELHARD.COM
• RE: LM3914???
  • From: John_Calabrese@ENGELHARD.COM
• RE: MAF and Calculated VE
  • From: Dave Plummer <davepl@MICROSOFT.com>
• Re: the GN [no EFI]
  • From: DC Smith <morepoweral@tetranet.net>
• Re: Crossfire injectors.
  • From: Bob Valentine <bob@tecmark.com>
• Re: Crossfire injectors.
  • From: Ken Kelly <kenkelly@lucent.com>
• Re: Crossfire injectors.
  • From: "Programmer" <nwester@eidnet.org>
• Re: Crossfire injectors.
  • From: "Programmer" <nwester@eidnet.org>
• Re: the GN [no EFI]
  • From: "Dave Zug." <dzug@delanet.com>
• Re: GM ECM transplant or fuel enrichment
  • From: Ward <WSpoonemore@excite.com>
• Re: GM ECM transplant or fuel enrichment
  • From: Jon Watts <jonwatts@yahoo.com>
• Re: Group purchase of wiring harness
  • From: Don Asetta <dasetta@kitfox.anv.net>
• Re: [Re: [syclone bin]]
  • From: Tom Sharpe <twsharpe@mtco.com>
• 88 TBI issue
  • From: Eric Deslauriers <edeslaur@us.oracle.com>
• Re: Group purchase of harness- was Re: harness special
  • From: "David" <David@gardener.com>
• Re: Group purchase of wiring harness
  • From: "Russ Harms" <global.geolab@memlane.com>
• Disassembler info: (was Syclone bin)
  • From: Dig <turbodig@usa.net>
• RE: DP Ram Emulator...
  • From: "Eric Aos" <Eric@Prototype-Engineering.com>
• '727/'730 v-8 .bin EGR
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: 88 TBI issue
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: the GN [no EFI]
  • From: DC Smith <morepoweral@tetranet.net>
• Fuel Pump (was [Re: Crossfire injectors.])
  • From: Dig <turbodig@usa.net>
• '727 connectors prev:Re: How to identify eprom
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: DP Ram Emulator...
  • From: steve ravet <sravet@arm.com>
• Re: welding tanks - was Crossfire injectors.
  • From: Tom Sharpe <twsharpe@mtco.com>
• RE: 88 TBI issue
  • From: Carl Summers <InTech@writeme.com>
• Re: Crossfire injectors.
  • From: Squash <realsquash@yahoo.com>
• Re: Fuel Pump (was [Re: Crossfire injectors.])
  • From: Shannen Durphey <shannen@grolen.com>
• RE: DP Ram Emulator...
  • From: "Eric Aos" <Eric@Prototype-Engineering.com>
• RE: DP Ram Emulator...
  • From: "Eric Aos" <Eric@Prototype-Engineering.com>
• Re: Group purchase of harness- was Re: harness special
  • From: Bob Valentine <bob@tecmark.com>
• RE: LM3914???
  • From: Bob Valentine <bob@tecmark.com>
• Re: LM3914???
  • From: clive@problem.org (Clive Apps - 510-0020 )
• Re: RE: LM3914???
  • From: Regnirps@aol.com
• Re: RE: LM3914???
  • From: Orin <orin>
• Re: DP Ram Emulator...
  • From: Ludis Langens <ludis@cruzers.com>
• Re: '727/'730 v-8 .bin EGR
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Fuel Pump (was [Re: Crossfire injectors.])
  • From: Rex Weatherford <rex.weatherford@terraglyph.com>
• RE: LM3914???
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Re: the GN [no EFI]
  • From: "Dave Zug." <dzug@delanet.com>
• Re: the GN [no EFI]
  • From: "Dave Zug." <dzug@delanet.com>
• RE: DP Ram Emulator...
  • From: Eric Aos <EOA@spartek.com>
• Re: RE: LM3914???
  • From: Regnirps@aol.com
• Re: the GN [no EFI]
  • From: "Dave Zug." <dzug@delanet.com>
• RE: GM ECM transplant or fuel enrichment
  • From: Mike rolica <97005620@lambton.on.ca>
• Guidance:I am a beginer !!
  • From: VAIDYA AJAY ASHOK <aavaidya@me.iitb.ernet.in>
• Re: the GN [no EFI]
  • From: "Dave Zug." <dzug@delanet.com>
• Odp: LM3914???
  • From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
• Re: the GN [no EFI]
  • From: "Patrick G. Moore" <pmoore@cmr.gov>
• Re: the GN [no EFI]
  • From: Keith <kgil1@tampabay.rr.com>
• Re: 88 TBI issue
  • From: Eric Deslauriers <edeslaur@us.oracle.com>
• Re: DP Ram Emulator...
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Guidance:I am a beginer !!
  • From: Swayze <kswayze@bellsouth.net>
• Re: the GN [no EFI]
  • From: "John D. Bachman" <jdbachman@redrose.net>
• RE:Re: Guidance:I am a beginer !!
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: the GN [no EFI]
  • From: "Dave Zug" <dzug@delanet.com>
• RE: Crossfire injectors.
  • From: Carl Summers <InTech@writeme.com>
• ecm bench
  • From: Bja1078@aol.com
• Re: Group purchase of harness- was Re: harness special
  • From: "David" <David@gardener.com>
• Re: ecm bench
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Group purchase of harness- was Re: harness special
  • From: ECMnut@aol.com
• Re: rats! vats!
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Group purchase of harness fizzled
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: Group purchase of harness- was Re: harness special
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: 88 TBI issue
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: Group purchase of harness- was Re: harness special
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: rats! vats!
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Group purchase of harness fizzled
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• RE: Group purchase of harness fizzled
  • From: "J. T. Spilman" <jtstexas@home.com>
• Re: GM training manuals
  • From: "Swayze" <kswayze@bellsouth.net>
• ald file for a '165
  • From: "John D. Bachman" <jdbachman@redrose.net>
• Re: ecm bench
  • From: PCMdoc <PCMdoc@surfree.com>
• Re: rats! vats!
  • From: PCMdoc <PCMdoc@surfree.com>
• O2 sensor/tailpipe adapter?
  • From: "Ken Kelly" <ken73@houston.rr.com>
• RE: Group purchase of harness fizzled
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Re: O2 sensor/tailpipe adapter?
  • From: gabe <gellett@earthlink.net>
• Re: Need help on 87 GM Buick GN ESC pin-out...
  • From: JTesta1966@aol.com
• RE: O2 sensor/tailpipe adapter?
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Anyone notice Grumpy has been MIA..??
  • From: ECMnut@aol.com
• Re: Anyone notice Grumpy has been MIA..??
  • From: Steve Ciciora <ciciora@edison.chisp.net>
• Re: O2 sensor/tailpipe adapter?
  • From: gabe <gellett@earthlink.net>
• How do you get chips out of the darn holder??
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: GM training manuals
  • From: steve ravet <sravet@arm.com>
• RE: Need help on 87 GM Buick GN ESC pin-out...
  • From: Don.F.Broadus@ucm.com
• Re: ecm bench
  • From: Ward <WSpoonemore@excite.com>
• Re: rats! vats!
  • From: Ward <WSpoonemore@excite.com>
• Need help on 87 GM Buick GN ESC pin-out...
  • From: "Iestyn Guest" <iguest@viewlogic.com>
• RE: How do you get chips out of the darn holder??
  • From: Carl Summers <InTech@writeme.com>
• Re: Need help on 87 GM Buick GN ESC pin-out...
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: How do you get chips out of the darn holder??
  • From: JTesta1966@aol.com
• Re: O2 sensor/tailpipe adapter?
  • From: Bob Valentine <bob@tecmark.com>
• Re: O2 sensor/tailpipe adapter?
  • From: "Jason Bonie" <jabonie@hotmail.com>
• Re: O2 sensor/tailpipe adapter?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: O2 sensor/tailpipe adapter?
  • From: Jared Tschetter <jtschetter@vermeermfg.com>
• RE: GM training manuals
  • From: "Geoff Richards" <gerich@one.net.au>
• interesting site
  • From: Swayze <kswayze@bellsouth.net>
• Thanks very much (Was: Need help on 87 GM Buick GN ESC pin-out.)
  • From: "Iestyn Guest" <iguest@viewlogic.com>
• Re: ecm bench
  • From: Jennifer Green & Scott Peitzsch <jlg-sep@mediaone.net>
• someone is selling Diacom compatible cables
  • From: ECMnut@aol.com
• V8 '165 harness modifications
  • From: Ernst denBroeder <edenbroe@cisco.com>
• RE: V8 '165 harness modifications
  • From: Mike rolica <97005620@lambton.on.ca>
• Re: V8 '165 harness modifications
  • From: Gabe <gellett@earthlink.net>
• Re: Crossfire injectors.
  • From: "Fran and Bud" <quest100@gte.net>
• Test only
  • From: kojab@free.net.au
• Re: Group purchase of harness fizzled
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• tbi:454 vs. 350
  • From: cwagner@info2000.net
• Heated O2 sensors
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: rats! vats!
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: Heated O2 sensors
  • From: "Dave Zug." <dzug@delanet.com>
• Re: rats! vats!
  • From: "Dave Zug." <dzug@delanet.com>
• Re: V8 '165 harness modifications
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: rats! vats!
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: V8 '165 harness modifications
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: V8 '165 harness modifications
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: rats! vats!
  • From: "Programmer" <nwester@eidnet.org>
• Re: V8 '165 harness modifications
  • From: gabe <gellett@earthlink.net>
• Re: V8 '165 harness modifications
  • From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
• Re: rats! vats!
  • From: Ken Kelly <kenkelly@lucent.com>
• Re: V8 '165 harness modifications
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: rats! vats!
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: was rats! vats! now nostalgia
  • From: "Programmer" <nwester@eidnet.org>
• Re: rats! vats!
  • From: "Programmer" <nwester@eidnet.org>
• Re: rats! vats!
  • From: PCMdoc <PCMdoc@surfree.com>
• Re: Fuel Pump
  • From: Terry <thartman@fastlane.net>
• Re: rats! vats!
  • From: Shannen Durphey <shannen@grolen.com>
• RE: nostalgia
  • From: "Eric Aos" <Eric@Prototype-Engineering.com>
• Re: Fuel Pump
  • From: Bja1078@aol.com
• Re: V8 '165 harness modifications
  • From: Shannen Durphey <shannen@grolen.com>
• Re: nostalgia
  • From: Shannen Durphey <shannen@grolen.com>
• Re: V8 '165 harness modifications
  • From: Eric Deslauriers <edeslaur@us.oracle.com>
• Re: Diacom: Is anyones selling theirs?
  • From: Shannen Durphey <shannen@grolen.com>
• Diacom: Is anyones selling theirs?
  • From: Eric Deslauriers <edeslaur@us.oracle.com>
• Nostalgia
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: V8 '165 harness modifications
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: V8 '165 harness modifications
  • From: Mark Romans <romans@pacbell.net>
• Re: nostalgia
  • From: William Brennan <STDBoy@worldnet.att.net>
• Re: nostalgia
  • From: "Fran and Bud" <quest100@gte.net>
• Re: nostalgia
  • From: Frederic Breitwieser <frederic@xephic.dynip.com>
• Re: nostalgia
  • From: "Dave Zug" <dzug@delanet.com>
• Re: nostalgia
  • From: "Sam Stratton" <transamsam@hotmail.com>
• Re: nostalgia
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: nostalgia
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: nostalgia
  • From: ECMnut@aol.com
• Re: V8 '165 harness modifications
  • From: JTesta1966@aol.com
• RE: V8 '165 harness modifications
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: rats! vats!
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• RE: nostalgia
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Re: V8 '165 harness modifications
  • From: JTesta1966@aol.com
• RE: V8 '165 harness modifications
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: nostalgia
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: nostalgia
  • From: Mike Veldman <vmike@email.ceat.okstate.edu>
• RE: nostalgia
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• IAC motors
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: nostalgia
  • From: "Programmer" <nwester@eidnet.org>
• Re: Conversion table
  • From: "Programmer" <nwester@eidnet.org>
• EPROM BCC decode
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Re: V8 '165 harness modifications
  • From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
• Re: nostalgia
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: V8 '165 harness modifications
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: IAC motors
  • From: gabe <gellett@earthlink.net>
• Re: IAC motors
  • From: Swayze <kswayze@bellsouth.net>
• Re: Conversion table
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• RE: someone is selling Diacom compatible cables
  • From: Dave Plummer <davepl@MICROSOFT.com>
• Re: Conversion table
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• RE: someone is selling Diacom compatible cables
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Please Ignore my previous plea Re: EPROM BCC decode
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Re: IAC motors
  • From: steve ravet <sravet@arm.com>
• PE mode questions.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• RE: someone is selling Diacom compatible cables
  • From: Bob Valentine <bob@tecmark.com>
• programming specs for N821s181
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Diacom problems on Thinkpads (Was Re: 88 TBI issue)
  • From: "K. Wong" <brougham1@home.com>
• RE: someone is selling Diacom compatible cables
  • From: Eric Clark <eclark@hoser.com>
• RE: programming specs for N821s181
  • From: Carl Summers <InTech@writeme.com>
• Re: IAC motors
  • From: Shannen Durphey <shannen@grolen.com>
• Re: someone is selling Diacom compatible cables
  • From: "David" <David@gardener.com>
• Re: V8 '165 harness modifications
  • From: Shannen Durphey <shannen@grolen.com>
• Re: IAC motors
  • From: rr <RRauscher@nni.com>
• Re: nostalgia
  • From: Bill Shaw <bshaw@connix.com>
• Re: someone is selling Diacom compatible cables
  • From: Frederic Breitwieser <frederic@xephic.dynip.com>
• Re: Diacom problems on Thinkpads (Was Re: 88 TBI issue)
  • From: Barry Tisdale <btisdale@cybersol.com>
• Conversion table
  • From: "Ramsey Foster" <ramsey_foster@mensor.com>
• RE: programming specs for N821s181
  • From: "K. Wong" <brougham1@home.com>
• Re: Nostalgia
  • From: Dig <turbodig@yahoo.com>
• Conversion table
  • From: "Ramsey Foster" <ramsey_foster@mensor.com>
• RE: Conversion table
  • From: "Ramsey Foster" <ramsey_foster@mensor.com>
• ALDL (8192) command timing (sort of longish)
  • From: Dig <turbodig@yahoo.com>
• Re: programming specs for N821s181
  • From: Ludis Langens <ludis@cruzers.com>
• Re: IAC motors
  • From: Ludis Langens <ludis@cruzers.com>
• Re: ecm bench
  • From: "nacelp" <nacelp@bright.net>
• Re: Diacom problems on Thinkpads (Was Re: 88 TBI issue)
  • From: Squash <realsquash@yahoo.com>
• Site Down?
  • From: "nacelp" <nacelp@bright.net>
• Re: PE mode questions.
  • From: Ward <WSpoonemore@excite.com>
• Site Down?
  • From: "nacelp" <nacelp@bright.net>
• Re: someone is selling Diacom compatible cables
  • From: "Dave Plummer" <davepl@MICROSOFT.com>
• Speedometer Scaling
  • From: "Dave Plummer" <davepl@MICROSOFT.com>
• Re: programming specs for N821s181
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Nother ALDL grabbing method
  • From: "Dave Zug" <dzug@delanet.com>
• OH - PS:
  • From: "Dave Zug" <dzug@delanet.com>
• Re: someone is selling Diacom compatible cables
  • From: "Dave Zug" <dzug@delanet.com>
• 7747 Aldl Communication
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: '727/'730 v-8 .bin EGR
  • From: "nacelp" <nacelp@bright.net>
• 747 aldl
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Need help with spark map's in 747.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• PING
  • From: Swayze <kswayze@bellsouth.net>
• Re: '727/'730 v-8 .bin EGR
  • From: Swayze <kswayze@bellsouth.net>
• [ADMIN] Server troubles.
  • From: "Jon V." <jon@valesh.com>
• AKFM 2174 bin
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: Diacom problems on Thinkpads (Was Re: 88 TBI issue)
  • From: Roger Heflin <rah@horizon.hit.net>
• Need help with PE mode questions.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: programming specs for N821s181
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: 747 aldl
  • From: "nacelp" <nacelp@bright.net>
• Re: Need help with PE mode questions.
  • From: JTesta1966@aol.com
• Re: someone is selling Diacom compatible cables
  • From: gabe <gellett@earthlink.net>
• [ADMIN] When it rains...
  • From: "Jon V." <jon@valesh.com>
• Re: Nother ALDL grabbing method
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: ALDL (8192) command timing (sort of longish)
  • From: steve ravet <sravet@arm.com>
• XDEs
  • From: "nacelp" <nacelp@bright.net>
• Re: Nother ALDL grabbing method
  • From: JTesta1966@aol.com
• Re: Site Down?
  • From: "David" <David@gardener.com>
• Re: Nother ALDL grabbing method
  • From: "David" <David@gardener.com>
• Re: Diacom problems on Thinkpads (Was Re: 88 TBI issue)
  • From: "Craig Moates" <craig.moates@home.com>
• Revised QBasic ALDL program for 165 with MAX232 on incoming
  • From: "Craig Moates" <craig.moates@home.com>
• Thinkpad 755C for sale
  • From: "Craig Moates" <craig.moates@home.com>
• Re: Need help with PE mode questions.
  • From: rr <RRauscher@nni.com>
• Re: AKFM 2174 bin
  • From: "Programmer" <nwester@eidnet.org>
• Re: Need help with spark map's in 747.
  • From: rr <RRauscher@nni.com>
• Revised QBasic ALDL program for 165 with MAX232 on incoming
  • From: "Craig Moates" <craig.moates@home.com>
• Re: [ADMIN] When it rains...
  • From: Steve Gorkowski <kb4mxo@mwt.net>
• Re: Need help with spark map's in 747.
  • From: steve ravet <sravet@arm.com>
• Cheap Programmers\Erasers
  • From: jweir@att.net
• Re: nostalgia
  • From: Mike Turner <miketurner@ieee.org>
• O2 Sensors - Output Graphs?
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: O2 Sensors - Output Graphs?
  • From: clive@problem.org (Clive Apps - 510-0020 )
• Re: O2 Sensors - Output Graphs?
  • From: Regnirps@aol.com
• Re: IAC motors
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Nother ALDL grabbing method
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: [ADMIN] Server troubles.
  • From: "Jon V." <jon@valesh.com>
• Re: O2 Sensors - Output Graphs?
  • From: Steve Ciciora <ciciora@edison.chisp.net>
• RE: Thinkpad 755C for sale
  • From: jacobss@greatoaks.com
• RE: Newbie question
  • From: jacobss@greatoaks.com
• [no subject]
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• [no subject]
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Speedometer Scaling
  • From: "Dave Plummer" <davepl@MICROSOFT.com>
• RE: O2 Sensors - Output Graphs?
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Emulator boards
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Nother ALDL grabbing method
  • From: "Dave Zug." <dzug@delanet.com>
• RE: Nother ALDL grabbing method
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: Nother ALDL grabbing method
  • From: "Jason Bonie" <jabonie@hotmail.com>
• RE: Nother ALDL grabbing method
  • From: "Ken Kelly" <ken73@houston.rr.com>
• Re: Emulator boards
  • From: Marc Randolph <mrand@pobox.com>
• Re: Nother ALDL grabbing method
  • From: "Dave Zug." <dzug@delanet.com>
• Re: Nother ALDL grabbing method
  • From: "nacelp" <nacelp@bright.net>
• Re: Nother ALDL grabbing method
  • From: "nacelp" <nacelp@bright.net>
• Re: Need help with spark map's in 747.
  • From: rr <RRauscher@nni.com>
• Re: Thinkpad 755C for sale
  • From: "Craig Moates" <craig.moates@home.com>
• Re: GMECM Digest V2 #71
  • From: Dig <turbodig@yahoo.com>
• RE: O2 Sensors - Output Graphs?
  • From: Bob Valentine <bob@tecmark.com>
• Re: GMECM Digest V2 #71
  • From: steve ravet <sravet@arm.com>
• Re: someone is selling Diacom compatible cables
  • From: "JN" <jwn@sgi.net>
• Re: Nother ALDL grabbing method
  • From: "Dave Zug." <dzug@delanet.com>
• RE: Universal Fuel Injection Two Bolt
  • From: "Jeff M" <tystorm@email.msn.com>
• knock sensor readout
  • From: John_Calabrese@ENGELHARD.COM
• Re: knock sensor readout
  • From: Ken Kelly <kenkelly@lucent.com>
• Re: knock sensor readout
  • From: "nacelp" <nacelp@bright.net>
• Re: AKFM 2174 bin
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: knock sensor readout
  • From: "nacelp" <nacelp@bright.net>
• knock sensor/solid cam
  • From: "Jeffrey Scott" <jws6367@mailcity.com>
• Re: knock sensor/solid cam
  • From: "nacelp" <nacelp@bright.net>
• Building PCB's
  • From: Marc Randolph <mrand@pobox.com>
• SLP Harness
  • From: Squash <realsquash@yahoo.com>
• Re: knock sensor/solid cam
  • From: "Jeffrey Scott" <jws6367@mailcity.com>
• Re: knock sensor/solid cam
  • From: Eric Deslauriers <edeslaur@us.oracle.com>
• Re: knock sensor/solid cam
  • From: "nacelp" <nacelp@bright.net>
• RE: knock sensor/solid cam
  • From: Mike rolica <97005620@lambton.on.ca>
• Re: knock sensor/solid cam
  • From: Eric Clark <eclark@hoser.com>
• Justa test ignore
  • From: "nacelp" <nacelp@bright.net>
• Re: AKFM 2174 bin
  • From: "Programmer" <nwester@eidnet.org>
• RE: knock sensor/solid cam
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Still looking for bins
  • From: "nacelp" <nacelp@bright.net>
• Newbie
  • From: BBadMonkey@aol.com
• Re: Newbie
  • From: "nacelp" <nacelp@bright.net>
• Re: XDE Documents
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• RE: knock sensor/solid cam
  • From: "mike mager" <mikemager@hotmail.com>
• more nother ALDL
  • From: "Dave Zug" <dzug@delanet.com>
• Debugger board for P4 ECMs
  • From: Ludis Langens <ludis@cruzers.com>
• RE: knock sensor/solid cam
  • From: Ernst denBroeder <edenbroe@cisco.com>
• RE: knock sensor/solid cam
  • From: "Jim Sloan" <leroy@sunflower.com>
• P4 Cylinder Select
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Debugger board for P4 ECMs
  • From: steve ravet <sravet@arm.com>
• Re: P4 Cylinder Select Thanks
  • From: "nacelp" <nacelp@bright.net>
• RE: Debugger board for P4 ECMs
  • From: "Bartz, Jamison" <Jamison.Bartz@COMPAQ.com>
• RE: knock sensor/solid cam
  • From: "mike mager" <mikemager@hotmail.com>
• Are my posts making it? was Speedometer Scaling
  • From: Dave Plummer <davepl@MICROSOFT.com>
• Re: Debugger board for P4 ECMs
  • From: "Peter Fenske" <Peter_Fenske@bcit.ca>
• Re: Are my posts making it? was Speedometer Scaling
  • From: "nacelp" <nacelp@bright.net>
• MAP data...was Re: 48 +1 and sensor data
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: Are my posts making it? was Speedometer Scaling
  • From: "Peter Fenske" <Peter_Fenske@bcit.ca>
• Re: Are my posts making it? was Speedometer Scaling
  • From: "Dave Zug." <dzug@delanet.com>
• Re: AKFM 2174 bin
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: Debugger board for P4 ECMs
  • From: Richard Wakeling <kojab@zxmail.com>
• Re: AKFM 2174 bin
  • From: "nacelp" <nacelp@bright.net>
• Re: Debugger board for P4 ECMs
  • From: Steve Ciciora <ciciora@edison.chisp.net>
• Re: AKFM 2174 bin
  • From: Ernst denBroeder <edenbroe@cisco.com>
• RE:debugger board for P4 ECMs
  • From: mswayze@truswood.com (Mike Swayze)
• RE: Debugger board for P4 ECMs
  • From: "Matt Tomlins" <mattpw@ozemail.com.au>
• Help with stupid question.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Debugger board for P4 ECMs
  • From: "nacelp" <nacelp@bright.net>
• Re: AKFM 2174 bin
  • From: "nacelp" <nacelp@bright.net>
• Re: Are my posts making it? was Speedometer Scaling
  • From: Mark Romans <romans@pacbell.net>
• Desensitizing GM knock sensors
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: Desensitizing GM knock sensors
  • From: Shannen Durphey <shannen@grolen.com>
• H*lp with stupid question.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: knock sensor/solid cam
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Desensitizing GM knock sensors
  • From: "nacelp" <nacelp@bright.net>
• Re: Debugger board for P4 ECMs
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Debugger board for P4 ECMs
  • From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
• Re: Debugger board for P4 ECMs
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Debugger board for P4 ECMs
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Desensitizing GM knock sensors
  • From: ECMnut@aol.com
• Re: MAP data...was Re: 48 +1 and sensor data
  • From: dhardin@ovec.com
• Re: Desensitizing GM knock sensors
  • From: dhardin@ovec.com
• Re: Debugger board for P4 ECMs
  • From: steve ravet <sravet@arm.com>
• Re: Desensitizing GM knock sensors
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Desensitizing GM knock sensors
  • From: Roger Heflin <rah@horizon.hit.net>
• RE: Desensitizing GM knock sensors
  • From: Dave Plummer <davepl@MICROSOFT.com>
• RE: Desensitizing GM knock sensors
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Desensitizing GM knock sensors
  • From: "nacelp" <nacelp@bright.net>
• Fuel prices / efficiency
  • From: "Dave Zug." <dzug@delanet.com>
• Re: Fuel prices / efficiency
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Fuel prices / efficiency
  • From: "nacelp" <nacelp@bright.net>
• Re: P4 Cylinder Select
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Fuel prices / efficiency
  • From: JTesta1966@aol.com
• Re: Desensitizing GM knock sensors
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: Fuel prices / efficiency
  • From: Aaron Willis <darkmonahue@awwwsome.com>
• Re: Fuel prices / efficiency
  • From: Daniel Ciobota <dciobota@hiwaay.net>
• Re: Fuel prices / efficiency
  • From: "nacelp" <nacelp@bright.net>
• Re: Desensitizing GM knock sensors
  • From: "nacelp" <nacelp@bright.net>
• Re: GMECM Digest V2 #78
  • From: Jody Shapiro <jshapiro@netgate.net>
• Re: P4 Cylinder Select
  • From: Ludis Langens <ludis@cruzers.com>
• Re: MAP data...was Re: 48 +1 and sensor data
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Debugger board for P4 ECMs
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: Desensitizing GM knock sensors
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Debugger board for P4 ECMs
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Debugger board for P4 ECMs
  • From: "Swayze" <kswayze@bellsouth.net>
• Data I/O 29B device programmer for sale
  • From: steve ravet <sravet@arm.com>
• Re: Desensitizing GM knock sensors
  • From: Mark Romans <romans@pacbell.net>
• RE: Data I/O 29B device programmer for sale
  • From: Carl Summers <InTech@writeme.com>
• don't read, just a test.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• RE: don't read, just a test.
  • From: Carl Summers <InTech@writeme.com>
• 2.0/2.2/2.5 DIS pinouts
  • From: Shannen Durphey <shannen@grolen.com>
• Now Emulator was ---->RE: Debugger board for P4 ECMs
  • From: "Eric Aos" <Eric@Prototype-Engineering.com>
• Turbo bin uploaded to incoming
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Turbo bin uploaded to incoming
  • From: ECMnut@aol.com
• Re: Turbo bin uploaded to incoming
  • From: Richard Wakeling <kojab@zxmail.com>
• Re: Turbo bin uploaded to incoming
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Data I/O 29B device programmer for sale
  • From: steve ravet <sravet@arm.com>
• Re: Turbo bin uploaded to incoming
  • From: steve ravet <sravet@arm.com>
• Re: Turbo bin uploaded to incoming
  • From: Richard Wakeling <kojab@zxmail.com>
• LT1 boost retard??
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Debugger board for P4 ECMs
  • From: Ludis Langens <ludis@cruzers.com>
• 1227748 schematic updated
  • From: Ludis Langens <ludis@cruzers.com>
• Re: LT1 boost retard??
  • From: PCMdoc <PCMdoc@surfree.com>
• Re: LT1 boost retard??
  • From: Roger Heflin <rah@horizon.hit.net>
• [no subject]
  • From: "DAVID THOMAS" <dave@vramp.net>
• Re: Now Emulator was ---->RE: Debugger board for P4 ECMs
  • From: mswayze@truswood.com (Mike Swayze)
• Re: Help with stupid question.
  • From: Ward <WSpoonemore@excite.com>
• Re: 1227748 schematic updated
  • From: steve ravet <sravet@arm.com>
• Re: 1227748 schematic updated
  • From: JTesta1966@aol.com
• Re: 1227748 schematic updated
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 1227748 schematic updated
  • From: steve ravet <sravet@arm.com>
• Re: Australia based GM .ecu files
  • From: "Daniel N" <gmecu@hotmail.com>
• Re: 1227748 schematic updated
  • From: "nacelp" <nacelp@bright.net>
• cheap eprom burner group purchase
  • From: Bob Valentine <bob@tecmark.com>
• Selling 68HC11 stuff
  • From: Regnirps@aol.com
• Re: cheap eprom burner group purchase
  • From: Keith <kgil1@tampabay.rr.com>
• Re: cheap eprom burner group purchase
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Australia based GM .ecu files
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• h*lp maps question
  • From: "Paul Smith" <pauls@mania.com.au>
• Dummy guestion
  • From: "nacelp" <nacelp@bright.net>
• Re: Dummy guestion
  • From: Ken Kelly <kenkelly@lucent.com>
• 2-bar MAP snensor
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: Dummy guestion
  • From: "Programmer" <nwester@eidnet.org>
• Re: Just a question, how bout?
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: MAP data...was Re: 48 +1 and sensor data
  • From: "Dave Zug." <dzug@delanet.com>
• Re: MAP data...was Re: 48 +1 and sensor data
  • From: John_Calabrese@ENGELHARD.COM
• BPW numbers
  • From: "Programmer" <nwester@eidnet.org>
• Any Dead MAFs ?
  • From: Davis <davis@mail.eecis.udel.edu>
• Re: Selling 68HC11 stuff
  • From: PHXSYS@aol.com
• Re: 1227748 schematic updated
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: 2-bar MAP snensor
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: BPW numbers
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Selling 68HC11 stuff
  • From: Regnirps@aol.com
• Re: BPW numbers
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Turbo bin uploaded to incoming
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Any Dead MAFs ?
  • From: John B <jdbachman@redrose.net>
• Re: BPW numbers
  • From: "Programmer" <nwester@eidnet.org>
• 93 F-Body M6 BIN
  • From: Eric Clark <eclark@hoser.com>
• Re: BPW numbers
  • From: "Programmer" <nwester@eidnet.org>
• Re: BPW numbers
  • From: "Dave Zug" <dzug@delanet.com>
• Re: BPW numbers
  • From: "Dave Zug." <dzug@delanet.com>
• Selectable chips & boost programming
  • From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
• Re: Selectable chips & boost programming
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: BPW numbers
  • From: "Programmer" <nwester@eidnet.org>
• Re: BPW numbers
  • From: "Programmer" <nwester@eidnet.org>
• cjkw1922_AUST.BIN
  • From: "Sutcliffe, Peter" <Peter.Sutcliffe@corpmail.telstra.com.au>
• RE: h*lp maps question
  • From: Dig <turbodig@yahoo.com>
• RE: Fuel prices / efficiency
  • From: Mika.Helander@softbit.fi
• Re: Selectable chips & boost programming
  • From: "Frank" <repair@frontiernet.net>
• Motorola S code to binary conversion program/utility
  • From: "Jason R. Haines" <jhaines@lingenfelter.com>
• ABS-OFF TOPIC-OFFLIST
  • From: mswayze@truswood.com (Mike Swayze)
• Re: Selectable chips & boost programming
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Selectable chips & boost programming
  • From: "Programmer" <nwester@eidnet.org>
• Mysterious rogue connector
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Mysterious rogue connector
  • From: Rick Lindstedt <rick@mafb.org>
• Re: Fuel prices / efficiency
  • From: Regnirps@aol.com
• Re: Selectable chips & boost programming
  • From: "Programmer" <nwester@eidnet.org>
• RE: Mysterious rogue connector
  • From: Don.F.Broadus@ucm.com
• Speedometer
  • From: cwagner@info2000.net
• Re: Mysterious rogue connector
  • From: JTesta1966@aol.com
• Re: Selectable chips & boost programming
  • From: cwagner@info2000.net
• Re: Fuel prices / efficiency
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: cjkw1922_AUST.BIN
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Selectable chips & boost programming
  • From: "nacelp" <nacelp@bright.net>
• Analog Cadillac/Bendix to'730
  • From: Russ Harms <global.geolab@memlane.com>
• Newbie to list
  • From: MdntRdr1@aol.com
• Re: Mysterious rogue connector
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Selectable chips & boost programming
  • From: Keith <kgil1@tampabay.rr.com>
• Re: Speedometer - transparent first-surface reflector needed!
  • From: "mike mager" <mikemager@hotmail.com>
• Re: Selectable chips & boost programming
  • From: "Programmer" <nwester@eidnet.org>
• Re: Selectable chips & boost programming
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Newbie to list
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Mysterious rogue connector
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Speedometer - transparent first-surface reflector needed!
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Analog Cadillac/Bendix to'730
  • From: Bob Valentine <bob@tecmark.com>
• Re: re:speedo-heads up disply was: speedometer-transparent first surface reflector needed
  • From: "Frank" <repair@frontiernet.net>
• RE: Speedometer - transparent first-surface reflector needed!
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Speedometer - transparent first-surface reflector needed!
  • From: Ernst denBroeder <ernst@willers.employees.org>
• Re: Speedometer - transparent first-surface reflector needed!
  • From: "C. Brooks" <cbrooks1@tqci.net>
• Re: Analog Cadillac/Bendix to'730
  • From: "Swayze" <kswayze@bellsouth.net>
• Odp: ABS-OFF TOPIC-OFFLIST
  • From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
• Re: h*lp maps question
  • From: "Paul Smith" <pauls@mania.com.au>
• re:speedo-heads up disply was: speedometer-transparent first surface reflector needed
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Selectable chips & boost programming
  • From: "Programmer" <nwester@eidnet.org>
• re:speedo-heads up disply was: speedometer-transparent first surface reflector needed
  • From: cwagner@info2000.net
• Re: Selectable chips & boost programming
  • From: David Cooley <n5xmt@bellsouth.net>
• Troublesome Eprom
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Troublesome Eprom
  • From: Chipsbyal@aol.com
• Re: Troublesome Eprom
  • From: "nacelp" <nacelp@bright.net>
• Re: Troublesome Eprom
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Troublesome Eprom
  • From: Mark Romans <romans@pacbell.net>
• Re: speedo-heads up disply was: speedometer-transparent first surface reflector needed
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• MEMCAL swap '88 to '89 (identical cars)
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• LS1 Pinouts
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: MEMCAL swap '88 to '89 (identical cars)
  • From: "nacelp" <nacelp@bright.net>
• Re: Troublesome Eprom
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Selectable chips & boost programming
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Analog Cadillac/Bendix to'730
  • From: Ludis Langens <ludis@cruzers.com>
• eprom carriers
  • From: "NickG" <nikog@mediaone.net>
• re:MEMCALs was:Re: Analog Cadillac/Bendix to'730
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Troublesome Eprom
  • From: "Programmer" <nwester@eidnet.org>
• lost 27 emails
  • From: "Programmer" <nwester@eidnet.org>
• Re: re:MEMCALs was:Re: Analog Cadillac/Bendix to'730
  • From: "nacelp" <nacelp@bright.net>
• Re: eprom carriers
  • From: "nacelp" <nacelp@bright.net>
• Re: eprom carriers
  • From: Jay Carter <JayC@RebelRednecks.Com>
• Re: eprom carriers
  • From: Ward <WSpoonemore@excite.com>
• Re: eprom carriers
  • From: "nacelp" <nacelp@bright.net>
• Re: Debugger board for P4 ECMs
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: re:MEMCALs
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: eprom carriers
  • From: "Programmer" <nwester@eidnet.org>
• Re: Selectable chips & boost programming
  • From: BBadMonkey@aol.com
• re:speedo-heads up disply was: speedometer-transparent first surface reflector needed
  • From: "Daniel N" <gmecu@hotmail.com>
• Re: eprom carriers
  • From: "NickG" <nikog@mediaone.net>
• need corvette bin file
  • From: "NickG" <nikog@mediaone.net>
• Re: need corvette bin file
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Using 28F256 ...
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• reprogramming MAF xfer function in '165 ECM
  • From: "NickG" <nikog@mediaone.net>
• Re: reprogramming MAF xfer function in '165 ECM
  • From: Mark Romans <romans@pacbell.net>
• Re: Troublesome Eprom
  • From: Shannen Durphey <shannen@grolen.com>
• New files on FTP site
  • From: Shannen Durphey <shannen@grolen.com>
• Motorola chip and more
  • From: Carl Summers <InTech@writeme.com>
• fast chip
  • From: Pat Ford <pford@qnx.com>
• Schematic proofreader needed
  • From: Ludis Langens <ludis@cruzers.com>
• RE: Mysterious rogue connector
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Debugger board for P4 ECMs
  • From: Ludis Langens <ludis@cruzers.com>
• curious about sfi
  • From: mswayze@truswood.com (Mike Swayze)
• Re: Debugger board for P4 ECMs
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: LS1 Pinouts
  • From: John_Calabrese@ENGELHARD.COM
• Re: curious about sfi
  • From: "nacelp" <nacelp@bright.net>
• Re: Selectable chips & boost programming
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: curious about sfi
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Troublesome Eprom
  • From: "Programmer" <nwester@eidnet.org>
• Re: Selectable chips & boost programming
  • From: "Programmer" <nwester@eidnet.org>
• Re: Selectable chips & boost programming
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: fast chip
  • From: "93 Formula" <red93formula@hotmail.com>
• Re: Selectable chips & boost programming
  • From: "Programmer" <nwester@eidnet.org>
• Re: Selectable chips & boost programming (thanks)
  • From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
• Re: fast chip
  • From: "Programmer" <nwester@eidnet.org>
• 305-350CAM
  • From: "Programmer" <nwester@eidnet.org>
• Re: fast chip
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 305-350CAM
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Lt1 Optispark
  • From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
• Re: Lt1 Optispark
  • From: "nacelp" <nacelp@bright.net>
• Re: Lt1 Optispark
  • From: Ward <wspoonemore@excite.com>
• Re: Selectable chips & boost programming (thanks)
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: Turbo bin uploaded to incoming
  • From: Richard Wakeling <kojab@ar.com.au>
• Re: Lt1 Optispark
  • From: Matt S Bower <m.s.bower@cummins.com>
• Re: Lt1 Optispark
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: 305-350CAM
  • From: "Programmer" <nwester@eidnet.org>
• Re: Selectable chips & boost programming
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: reprogramming MAF xfer function in '165 ECM
  • From: Mike Rolica <97005620@lambton.on.ca>
• Re: Selectable chips & boost programming
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Selectable chips & boost programming
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Lt1 Optispark
  • From: "nacelp" <nacelp@bright.net>
• RE: Selectable chips & boost programming
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Flow Chart
  • From: "nacelp" <nacelp@bright.net>
• RE: Selectable chips & boost programming
  • From: Roger Heflin <rah@horizon.hit.net>
• RE: Lt1 Optispark
  • From: Don.F.Broadus@ucm.com
• Re: Lt1 Optispark
  • From: "nacelp" <nacelp@bright.net>
• Re: 2-bar MAP snensor
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: Selectable chips & boost programming
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Lt1 Optispark
  • From: Scott Knight <scott@scottknight.com>
• Re: 2-bar MAP snensor
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• ALDL Communications
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: ALDL Communications
  • From: MdntRdr1@aol.com
• Re: Speedometer - transparent first-surface reflector needed!
  • From: "mike mager" <mikemager@hotmail.com>
• 6in1 EPROM
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: 6in1 EPROM
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• '727('730) sfi was:Re: curious about sfi
  • From: mswayze@truswood.com (Mike Swayze)
• Re: 2-bar MAP sensor
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: 6in1 EPROM
  • From: David Cooley <n5xmt@bellsouth.net>
• New .bins on ftp site
  • From: Shannen Durphey <shannen@grolen.com>
• DIS again--sensor interface
  • From: mswayze@truswood.com (Mike Swayze)
• fastchips
  • From: Pat Ford <pford@qnx.com>
• Rom Changers
  • From: Christian Hack <christianh@edmi.com.au>
• Re: Turbo bin uploaded to incoming
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Debugger board for P4 ECMs
  • From: Ludis Langens <ludis@cruzers.com>
• Re: curious about sfi
  • From: Ludis Langens <ludis@cruzers.com>
• Frederic Breitwieser is famous!! (noefi)
  • From: John_Calabrese@ENGELHARD.COM
• RE: Frederic Breitwieser is famous!! (noefi)
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Re: Debugger board for P4 ECMs
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: curious about sfi
  • From: "Swayze" <kswayze@bellsouth.net>
• RE: Conversion table
  • From: Mike rolica <97005620@lambton.on.ca>
• Re: fast chip
  • From: "93 Formula" <red93formula@hotmail.com>
• RE: Conversion table
  • From: "Ramsey Foster" <ramsey_foster@mensor.com>
• To NOP, or not to NOP...
  • From: Shannen Durphey <shannen@grolen.com>
• Re: To NOP, or not to NOP...
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Debugger board for P4 ECMs
  • From: Ludis Langens <ludis@cruzers.com>
• Re: To NOP, or not to NOP...
  • From: rr <RRauscher@nni.com>
• Plug reading
  • From: David Cooley <n5xmt@bellsouth.net>
• Flow rates on injectors 2.8 & 3.1 engines
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• VR Sensors
  • From: Bill Shaw <bshaw@connix.com>
• 1227730/1227749 Schematic
  • From: Ludis Langens <ludis@cruzers.com>
• algrippocode.zip
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Flow rates on injectors 2.8 & 3.1 engines
  • From: Ward <WSpoonemore@excite.com>
• Re: Flow rates on injectors 2.8 & 3.1 engines
  • From: "Swayze" <kswayze@bellsouth.net>
• 2 bar axxc bin for '7730
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: Plug reading
  • From: "Programmer" <nwester@eidnet.org>
• Re: Plug reading
  • From: David Cooley <n5xmt@bellsouth.net>
• List member virus alert
  • From: "Mike Pitts" <mpitts@emi.net>
• Re: Plug reading
  • From: "nacelp" <nacelp@bright.net>
• Re: Plug reading
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Plug reading
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Plug reading
  • From: "Programmer" <nwester@eidnet.org>
• Fw: Dummy at CSH, HQ
  • From: "nacelp" <nacelp@bright.net>
• Re: Fw: Dummy at CSH, HQ
  • From: David Cooley <n5xmt@bellsouth.net>
• 305 to 350
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Need some injector info
  • From: Carl Summers <InTech@writeme.com>
• Re: 305 to 350
  • From: BBadMonkey@aol.com
• Re: Fw: Dummy at CSH, HQ
  • From: Shannen Durphey <shannen@grolen.com>
• .Bin needed
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 305 to 350
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 305 to 350
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 305 to 350
  • From: "Programmer" <nwester@eidnet.org>
• Re: Plug reading
  • From: "Programmer" <nwester@eidnet.org>
• Re: 305 to 350
  • From: "Programmer" <nwester@eidnet.org>
• Re: Fw: Dummy at CSH, HQ
  • From: "Mike (Perth, WA)" <erazmus@wantree.com.au>
• #INTRO: New List Member
  • From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
• RE: Fw: Dummy at CSH, HQ
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Fwd: *ALERT* Worm Virus Spreading thru Buick community
  • From: JTesta1966@aol.com
• injector flow (links and question)
  • From: mswayze@truswood.com (Mike Swayze)
• Re: Plug reading
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: injector flow (links and question)
  • From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
• Re: injector flow (links and question)
  • From: "Swayze" <kswayze@bellsouth.net>
• GM Powertrain
  • From: 303print <303print@northrim.net>
• Re: injector flow (links and question)
  • From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
• Re: injector flow (links and question)
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: GM Powertrain
  • From: "nacelp" <nacelp@bright.net>
• Re: #INTRO: New List Member
  • From: Ludis Langens <ludis@cruzers.com>
• Lotus carlton ECU?
  • From: Dave Evans <dave@gsicarlton.demon.co.uk>
• Re: Plug reading
  • From: "Programmer" <nwester@eidnet.org>
• Re: #INTRO: New List Member
  • From: ECMnut@aol.com
• Re: Lotus carlton ECU?
  • From: ECMnut@aol.com
• Re: Lotus carlton ECU?
  • From: "nacelp" <nacelp@bright.net>
• Re: injector flow (links and question)
  • From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
• Re: GM Powertrain
  • From: Shannen Durphey <shannen@grolen.com>
• Re: GM Powertrain
  • From: ron harris <harris1@execpc.com>
• VATS
  • From: Keith Lund <keithl@redrocksw.com>
• Re: VATS
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Administrivia
  • From: Orin <orin>
• Re: VATS
  • From: "nacelp" <nacelp@bright.net>
• Re: VATS
  • From: Shannen Durphey <shannen@grolen.com>
• Signal generator for ecm bench
  • From: Scott Knight <scott@scottknight.com>
• RE: VATS
  • From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
• RE: Signal generator for ecm bench
  • From: Don.F.Broadus@ucm.com
• AWWH and AWUP
  • From: "Dr.Acacio" <aortiz@w3ti.com.br>
• 89 F-body ECU file = 89 Y-body ECU file?
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: AWWH and AWUP
  • From: "nacelp" <nacelp@bright.net>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: "nacelp" <nacelp@bright.net>
• 4L60E Trans controller
  • From: "gene l. clifford" <genelc@idworld.net>
• ALDL via the sound card
  • From: Steve Ciciora <ciciora@edison.chisp.net>
• Big cams are better
  • From: joe boucher <gmefigearhead@juno.com>
• Re: 4L60E Trans controller
  • From: Ward <WSpoonemore@excite.com>
• RE: 4L60E Trans controller
  • From: Scott Parkhurst <ScottP@mcmullenargus.com>
• RE: 89 F-body ECU file = 89 Y-body ECU file?
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Idle richness with 7747.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• RN Carriers for 2732A EPROMS
  • From: Craig Marcho <craigmarcho@rocketmail.com>
• Re: Idle richness with 7747.
  • From: "nacelp" <nacelp@bright.net>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: "nacelp" <nacelp@bright.net>
• O2 voltage on Diacom
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: 89 F-body ECU file = 89 Y-body ECU file?
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: O2 voltage on Diacom
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: O2 voltage on Diacom
  • From: "nacelp" <nacelp@bright.net>
• Re: 4L60E Trans controller
  • From: "nacelp" <nacelp@bright.net>
• Re: 4L60E Trans controller
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Signal generator for ecm bench
  • From: Ken Kelly <kenkelly@lucent.com>
• Re: 4L60E Trans controller/Ward
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: 4L60E Trans controller
  • From: "nacelp" <nacelp@bright.net>
• Re: Big cams are better
  • From: "nacelp" <nacelp@bright.net>
• Re: Signal generator for ecm bench
  • From: "nacelp" <nacelp@bright.net>
• Re: 4L60E Trans controller
  • From: Scott Knight <scott@scottknight.com>
• Re: 4L60E Trans controller
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: Big cams are better
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 4L60E Trans controller
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Signal generator for ecm bench
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Idle richness with 7747.
  • From: Shannen Durphey <shannen@grolen.com>
• Intro and a Request!
  • From: "Craig Marcho" <marcho@global101.com>
• Re: Intro and a Request!
  • From: "nacelp" <nacelp@bright.net>
• Re: CYCLONE 700R4 AWD VSS
  • From: Shannen Durphey <shannen@grolen.com>
• CYCLONE 700R4 AWD VSS
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: CYCLONE 700R4 AWD VSS
  • From: "nacelp" <nacelp@bright.net>
• Re: Big cams are better
  • From: Joe Boucher <gmefigearhead@juno.com>
• Re: 305 to 350
  • From: BBadMonkey@aol.com
• Re: 4L60E Trans controller/Ward
  • From: Ward <WSpoonemore@excite.com>
• Re: CYCLONE 700R4 AWD VSS
  • From: ECMnut@aol.com
• Re: CYCLONE 700R4 AWD VSS
  • From: "nacelp" <nacelp@bright.net>
• Re: 4L60E Trans controller/Ward
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: 4L60E Trans controller/Ward
  • From: "nacelp" <nacelp@bright.net>
• Re: Big cams are better
  • From: "nacelp" <nacelp@bright.net>
• Re: 4L60E trans controller
  • From: Nykyforuk <bnyk@oanet.com>
• Re: Idle richness with 7747.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: AWWH and AWUP
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: RN Carriers for 2732A EPROMS
  • From: "Kevin Reynolds" <kereyn@gte.net>
• 730/727 instead of 7747... Has it been done?
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Idle richness with 7747.
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Idle richness with 7747.
  • From: JTesta1966@aol.com
• Re: 305 to 350
  • From: "Programmer" <nwester@eidnet.org>
• RE: 89 F-body ECU file = 89 Y-body ECU file?
  • From: Mike rolica <97005620@lambton.on.ca>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• RE: 4L60E Trans controller
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• RE: 4L60E Trans controller
  • From: Scott Parkhurst <ScottP@mcmullenargus.com>
• RE: 4L60E Trans controller
  • From: Scott Parkhurst <ScottP@mcmullenargus.com>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: "nacelp" <nacelp@bright.net>
• RE: 4L60E Trans controller
  • From: Scott Parkhurst <ScottP@mcmullenargus.com>
• Re: 4L60E Trans controller
  • From: "nacelp" <nacelp@bright.net>
• RE: 4L60E Trans controller
  • From: bearbvd@cmn.net (Greg Hermann)
• RE: 4L60E Trans controller
  • From: bearbvd@cmn.net (Greg Hermann)
• RE: 89 F-body ECU file = 89 Y-body ECU file?
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: 4L60E Trans controller
  • From: bearbvd@cmn.net (Greg Hermann)
• RE: 4L60E Trans controller
  • From: Scott Parkhurst <ScottP@mcmullenargus.com>
• VE stability
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• RE: 4L60E Trans controller
  • From: Scott Parkhurst <ScottP@mcmullenargus.com>
• RE: 4L60E Trans controller
  • From: Scott Parkhurst <ScottP@mcmullenargus.com>
• HEI
  • From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
• RE: 89 F-body ECU file = 89 Y-body ECU file?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• MAP signal dampening
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: MAP signal dampening
  • From: "nacelp" <nacelp@bright.net>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: "nacelp" <nacelp@bright.net>
• Re: VE stability
  • From: "nacelp" <nacelp@bright.net>
• Re: MAP signal dampening
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: VE stability
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: "nacelp" <nacelp@bright.net>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: "nacelp" <nacelp@bright.net>
• Re: MAP signal dampening
  • From: gabe <gellett@earthlink.net>
• RE: 89 F-body ECU file = 89 Y-body ECU file?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: VE stability
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: 4L60E Trans controller
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 4L60E Trans controller
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: "nacelp" <nacelp@bright.net>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: "Swayze" <kswayze@bellsouth.net>
• RE: 4L60E Trans controller
  • From: "alexpeper" <alexpeper@email.msn.com>
• missed digest 106
  • From: Nykyforuk <bnyk@oanet.com>
• RE: MAP signal dampening
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: MAP signal dampening
  • From: Ward <WSpoonemore@excite.com>
• Re: MAP signal dampening
  • From: Ward <WSpoonemore@excite.com>
• Re: VE stability
  • From: "Dave & Irina Eicher" <sailors@mwci.net>
• RE: MAP signal dampening
  • From: Carl Summers <InTech@writeme.com>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: cwagner@info2000.net
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: "nacelp" <nacelp@bright.net>
• Re: VE stability
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Bosch ecm
  • From: Geoff Campbell <campbell@cyberwizards.com.au>
• 89 F-body ECU file = 89 Y-body ECU file?
  • From: Mark Romans <romans@pacbell.net>
• Dumping beyond $FFFF
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Bosch ecm
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• RE: MAP signal dampening
  • From: Carl Summers <InTech@writeme.com>
• Re: VE stability
  • From: JTesta1966@aol.com
• Re: MAP signal dampening
  • From: "Swayze" <kswayze@bellsouth.net>
• BBC TB Needed
  • From: "nacelp" <nacelp@bright.net>
• '747 top end fuel leanout
  • From: "NickG" <nikog@mediaone.net>
• RE: MAP signal dampening
  • From: "Mike (Perth, Western Australia)" <erazmus@wantree.com.au>
• RE: 89 F-body ECU file = 89 Y-body ECU file?
  • From: Mike rolica <97005620@lambton.on.ca>
• RE: MAP signal dampening
  • From: Mike rolica <97005620@lambton.on.ca>
• Re: 89 F-body ECU file = 89 Y-body ECU file?
  • From: "nacelp" <nacelp@bright.net>
• RE: MAP signal dampening
  • From: "alexpeper" <alexpeper@email.msn.com>
• thermistor time was: 89 F-body ECU file = 89 Y-body ECU file?
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: '747 top end fuel leanout
  • From: "nacelp" <nacelp@bright.net>
• Re: '747 top end fuel leanout
  • From: "NickG" <nikog@mediaone.net>
• RE: MAP signal dampening
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: VE stability
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: '747 top end fuel leanout
  • From: "nacelp" <nacelp@bright.net>
• Re: MAP signal dampening
  • From: "Programmer" <nwester@eidnet.org>
• Re: '747 top end fuel leanout
  • From: "Programmer" <nwester@eidnet.org>
• Re: MAP signal damping
  • From: "Gerald Pelnar" <wd0fyf@mpks.net>
• Re: Idle richness with 7747.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Idle richness with 7747.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Bosch ecm
  • From: "Geoff, Kate & Theo Campbell" <campbell@cyberwizards.com.au>
• Re: MAP signal damping
  • From: "nacelp" <nacelp@bright.net>
• Re: MAP signal damping
  • From: "John T. Martin" <gmman@eskimo.com>
• Re: Sensor response times; was 89 F-body ECU
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: Sensor response times; was 89 F-body ECU
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Sensor response times; was 89 F-body ECU
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: Sensor response times; was 89 F-body ECU
  • From: "nacelp" <nacelp@bright.net>
• Re: MAP signal damping
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: Sensor response times; was 89 F-body ECU
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Idle richness with 7747.
  • From: Shannen Durphey <shannen@grolen.com>
• Re: MAP signal damping/more cam help
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: MAP signal damping/more cam help
  • From: "nacelp" <nacelp@bright.net>
• engine simulator
  • From: "nacelp" <nacelp@bright.net>
• Re: engine simulator
  • From: thergen@svn.net
• Re: MAP signal damping/more cam help
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: MAP signal damping/more cam help
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: MAP signal damping/more cam help
  • From: JTesta1966@aol.com
• Re: MAP signal damping/more cam help
  • From: JTesta1966@aol.com
• Re: MAP signal damping/more cam help
  • From: "nacelp" <nacelp@bright.net>
• Re: MAP signal damping/more cam help
  • From: "Jeff M" <tystorm@email.msn.com>
• 91 Lotus Carlton ECU
  • From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: 91 Lotus Carlton ECU
  • From: "nacelp" <nacelp@bright.net>
• ANHT
  • From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
• RE: 91 Lotus Carlton ECU
  • From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: 91 Lotus Carlton ECU
  • From: "nacelp" <nacelp@bright.net>
• Re: ANHT
  • From: cwagner@info2000.net
• 7730ALDL
  • From: cwagner@info2000.net
• Re: 7730ALDL
  • From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
• VSS differences for 746 to 730 swap
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: 7730ALDL
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: 7730ALDL
  • From: gabe <gellett@earthlink.net>
• Re: 7730ALDL
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: ANHT
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: ANHT
  • From: "nacelp" <nacelp@bright.net>
• Re: ANHT
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: VSS differences for 746 to 730 swap
  • From: "nacelp" <nacelp@bright.net>
• Wacky idea to force Alpha-n on a SD gm ecm.. a silly idea for thoes with map woes
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: VSS differences for 746 to 730 swap
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: 7730ALDL
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• Re: VSS differences for 746 to 730 swap
  • From: "nacelp" <nacelp@bright.net>
• AKFL bin - anyone have AMXY?
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: VSS differences for 746 to 730 swap
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: 7730ALDL
  • From: Nico Over <nicomax@erols.com>
• Re: AKFL bin - anyone have AMXY?
  • From: "nacelp" <nacelp@bright.net>
• Re: 7730ALDL
  • From: "Dave & Irina Eicher" <sailors@mwci.net>
• ALDL, ANHT
  • From: cwagner@info2000.net
• Re: VSS differences for 746 to 730 swap
  • From: cwagner@info2000.net
• Re: 91 Lotus Carlton ECU
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 7730ALDL
  • From: Keith <kgil1@tampabay.rr.com>
• Re: 91 Lotus Carlton ECU
  • From: Shannen Durphey <shannen@grolen.com>
• Re: ANHT
  • From: Shannen Durphey <shannen@grolen.com>
• Re: AKFL bin - anyone have AMXY?
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: 91 Lotus Carlton ECU
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 7730ALDL
  • From: "Programmer" <nwester@eidnet.org>
• Re: VSS differences for 746 to 730 swap
  • From: Shannen Durphey <shannen@grolen.com>
• Re: VSS differences for 746 to 730 swap
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: 91 Lotus Carlton ECU
  • From: ECMnut@aol.com
• Re: 91 Lotus Carlton ECU
  • From: ECMnut@aol.com
• Re: VSS differences for 746 to 730 swap
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: MAP signal dampening
  • From: Tom Sharpe <twsharpe@mtco.com>
• Re: VSS differences for 746 to 730 swap
  • From: Shannen Durphey <shannen@grolen.com>
• RE: Map Signal Dampening
  • From: "Michael Adams" <michaeladams1@compuserve.com>
• RE: 4L60E Trans controller
  • From: Carl Summers <InTech@writeme.com>
• RE: Idle richness with 7747.
  • From: Carl Summers <InTech@writeme.com>
• RE: 91 Lotus Carlton ECU
  • From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: AWWH and AWUP
  • From: "Dr.Acacio" <aortiz@w3ti.com.br>
• Re: MAP signal dampening
  • From: "Programmer" <nwester@eidnet.org>
• Ford to GM swap...
  • From: David Cooley <n5xmt@bellsouth.net>
• dumb & dumber
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: Ford to GM swap...
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: dumb & dumber
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: dumb & dumber
  • From: David Cooley <n5xmt@bellsouth.net>
• Horsepower!!!
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: dumb & dumber
  • From: steve ravet <sravet@arm.com>
• RE: Horsepower!!!
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Ford to GM swap...
  • From: Ward <WSpoonemore@excite.com>
• RE: dumb & dumber (from the dumbest :-)
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: Horsepower!!!
  • From: Squash <realsquash@yahoo.com>
• Re: Ford to GM swap...
  • From: David Cooley <n5xmt@bellsouth.net>
• RE: Horsepower!!!
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Ford to GM swap...
  • From: JTesta1966@aol.com
• Re: Ford to GM swap...
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Ford to GM swap...
  • From: JTesta1966@aol.com
• RE: dumb & dumber
  • From: Carl Summers <InTech@writeme.com>
• Re: dumb & dumber
  • From: "nacelp" <nacelp@bright.net>
• Re: dumb & dumber
  • From: "nacelp" <nacelp@bright.net>
• RE: Horsepower!!!
  • From: Dave Plummer <davepl@MICROSOFT.com>
• 700R4 TCC Solenoid bad? (limited EFI content)
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: 700R4 TCC Solenoid bad? (limited EFI content)
  • From: steve ravet <sravet@arm.com>
• Re: 700R4 TCC Solenoid bad? (limited EFI content)
  • From: David Cooley <n5xmt@bellsouth.net>
• RE: Horsepower!!!
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: 700R4 TCC Solenoid bad? (limited EFI content)
  • From: "nacelp" <nacelp@bright.net>
• Re: dumb & dumber/bad #
  • From: "gene l. clifford" <genelc@idworld.net>
• RE: GM Powertrain
  • From: Carl Summers <InTech@writeme.com>
• Re: dumb & dumber/bad #
  • From: "C. Brooks" <cbrooks1@tqci.net>
• RE: Horsepower!!!
  • From: Squash <realsquash@yahoo.com>
• Re: Horsepower!!!
  • From: Tom Sharpe <twsharpe@mtco.com>
• Re: dumb & dumber
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 91 Lotus Carlton ECU
  • From: ECMnut@aol.com
• Re: 700R4 TCC Solenoid bad? (limited EFI content)
  • From: "mike mager" <mikemager@hotmail.com>
• Re: dumb & dumber
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 91 Lotus Carlton ECU
  • From: Shannen Durphey <shannen@grolen.com>
• Re: dumb & dumber
  • From: Shannen Durphey <shannen@grolen.com>
• Re: dumb & dumber/bad #
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Horsepower!!!
  • From: "Dave Zug" <dzug@delanet.com>
• 1226156
  • From: "Programmer" <nwester@eidnet.org>
• HLR0977 - '85 Corvette Export EPROM
  • From: "Craig Marcho" <marcho@global101.com>
• Re: dumb & dumber/bad #
  • From: "nacelp" <nacelp@bright.net>
• HLR0977 - '85 Corvette Export EPROM
  • From: "Craig Marcho" <marcho@global101.com>
• PCM min for tranny oper
  • From: "nacelp" <nacelp@bright.net>
• RE: Horsepower!!!
  • From: Don.F.Broadus@ucm.com
• Re: 700R4 TCC Solenoid bad? (limited EFI content)
  • From: Chipsbyal@aol.com
• RE: Horsepower!!!
  • From: Squash <realsquash@yahoo.com>
• RE: Paddle Shifters - Electronic Trans Controller
  • From: Scott Parkhurst <ScottP@mcmullenargus.com>
• Paddle Shifters - Electronic Trans Controller
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: HLR0977 - '85 Corvette Export EPROM
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: dumb & dumber
  • From: "Swayze" <kswayze@bellsouth.net>
• MAP sensors
  • From: mswayze@truswood.com (Mike Swayze)
• Re: dumb & dumber
  • From: "gene l. clifford" <genelc@idworld.net>
• Fw: 12497316
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: 700R4 TCC Solenoid bad? (limited EFI content)
  • From: "Patrick G. Moore" <pmoore@cmr.gov>
• Re: HLR0977 - '85 Corvette Export EPROM
  • From: "nacelp" <nacelp@bright.net>
• Re: dumb & dumber
  • From: steve ravet <sravet@arm.com>
• Re: 700R4 TCC Solenoid bad? (limited EFI content)
  • From: Roger Heflin <rah@horizon.hit.net>
• RE: dumb & dumber
  • From: Scott Parkhurst <ScottP@mcmullenargus.com>
• Re: MAP sensors
  • From: "nacelp" <nacelp@bright.net>
• Re: 12497316
  • From: "nacelp" <nacelp@bright.net>
• Re: MAP sensors
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: 12497316
  • From: "Swayze" <kswayze@bellsouth.net>
• Ignition Simulator
  • From: "nacelp" <nacelp@bright.net>
• Re: Ignition Simulator
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: 700R4 TCC Solenoid bad? (limited EFI content)
  • From: "Programmer" <nwester@eidnet.org>
• Re: AWWH and AWUP (and BAMY)
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: 12497316/ fax copy
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: dumb & dumber
  • From: Shannen Durphey <shannen@grolen.com>
• Re: HLR0977 - '85 Corvette Export EPROM
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 700R4 TCC Solenoid bad? (limited EFI content)
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 700R4 TCC Solenoid bad? (limited EFI content)
  • From: "John T. Martin" <gmman@eskimo.com>
• Re: TCC lockup on 700R4
  • From: Dig <turbodig@yahoo.com>
• Re: 700R4 TCC Solenoid bad? (limited EFI content)
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: 700R4 TCC Solenoid bad? (limited EFI content)
  • From: "Programmer" <nwester@eidnet.org>
• Delco
  • From: "black maj" <blackmin@hotmail.com>
• RE: GM Powertrain
  • From: "Bob Groger" <monitorguy@eagleserver.com>
• Re: Delco
  • From: "Programmer" <nwester@eidnet.org>
• Re: 1226156
  • From: "Programmer" <nwester@eidnet.org>
• Re: dumb & dumber
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: 12497316/ fax copy
  • From: "Jeff Kopp" <jkopp@direcpc.com>
• Re: Delco
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: MAP signal damping/more cam help
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 91 Lotus Carlton ECU
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Wacky idea to force Alpha-n on a SD gm ecm
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Wacky idea to force Alpha-n on a SD gm ecm
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Delco
  • From: "black maj" <blackmin@hotmail.com>
• Re: 91 Lotus Carlton ECU
  • From: ECMnut@aol.com
• Re: 91 Lotus Carlton ECU
  • From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
• Re: 91 Lotus Carlton ECU
  • From: "Swayze" <kswayze@bellsouth.net>
• TCom_MAP EFax
  • From: mswayze@truswood.com (Mike Swayze)
• Re: TCom_MAP EFax
  • From: "nacelp" <nacelp@bright.net>
• RE: Horsepower!!!
  • From: eclark@hoser.com
• PCM Questions
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• My turn for a conversion
  • From: JTesta1966@aol.com
• 1228331 (16157364?)
  • From: mswayze@truswood.com (Mike Swayze)
• Re: Color Tune - Safety Warning !
  • From: robert.schofield@philips.com
• Re: 1228331 (16157364?)
  • From: "Superior Chevrolet" <superchevyparts@mindspring.com>
• Re: 1228331 (16157364?)
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: 1228331 (16157364?)
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: My turn for a conversion
  • From: "nacelp" <nacelp@bright.net>
• Cam tuning
  • From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
• Re: 1228331 (16157364?)
  • From: "nacelp" <nacelp@bright.net>
• Re: My turn for a conversion
  • From: JTesta1966@aol.com
• Re: Cam tuning
  • From: "nacelp" <nacelp@bright.net>
• Re: My turn for a conversion
  • From: "nacelp" <nacelp@bright.net>
• Re: My turn for a conversion
  • From: JTesta1966@aol.com
• Re: My turn for a conversion
  • From: "nacelp" <nacelp@bright.net>
• Re: My turn for a conversion
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Cam tuning
  • From: Roger Heflin <rah@horizon.hit.net>
• KalMaker experience?
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• RE: GM Powertrain
  • From: Carl Summers <InTech@writeme.com>
• Re: Cam tuning
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: MAP signal dampening
  • From: Tom Sharpe <twsharpe@mtco.com>
• Re: 1228331 (16157364?)
  • From: Shannen Durphey <shannen@grolen.com>
• LS1 in 64 Impala SS
  • From: "Dave & Irina Eicher" <sailors@mwci.net>
• Re: LS1 in 64 Impala SS
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: LS1 in 64 Impala SS
  • From: PCMdoc <PCMdoc@surfree.com>
• Re: 1228331 (16157364?)
  • From: "gene l. clifford" <genelc@idworld.net>
• Color Tune - Safety Warning !
  • From: "Mike (Perth, Western Australia)" <erazmus@wantree.com.au>
• E(E)PROM pn and speeds
  • From: Bob Valentine <bob@tecmark.com>
• Re: dumb & dumber
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 1228331 (16157364?)
  • From: Shannen Durphey <shannen@grolen.com>
• Re: E(E)PROM pn and speeds
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: 1228331 (16157364?)
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: LS1 in 64 Impala SS
  • From: "Dave & Irina Eicher" <sailors@mwci.net>
• TPI 747
  • From: "nacelp" <nacelp@bright.net>
• Re: MAP signal dampening
  • From: "Programmer" <nwester@eidnet.org>
• Re: TPI 747
  • From: "Programmer" <nwester@eidnet.org>
• Re: TPI 747
  • From: rr <RRauscher@nni.com>
• Re: dumb & dumber
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: TPI 747
  • From: "nacelp" <nacelp@bright.net>
• Re: TPI 747
  • From: "nacelp" <nacelp@bright.net>
• Re: dumb & dumber
  • From: "nacelp" <nacelp@bright.net>
• Re: TPI 747
  • From: "Programmer" <nwester@eidnet.org>
• Re: TPI 747
  • From: "nacelp" <nacelp@bright.net>
• Re: PCM Questions
  • From: Ward <WSpoonemore@excite.com>
• Re: LS1 in 64 Impala SS
  • From: "alexpeper" <alexpeper@email.msn.com>
• 7747 Bin needed
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: TPI 747
  • From: rr <RRauscher@nni.com>
• Re: TPI 747
  • From: "nacelp" <nacelp@bright.net>
• Re: 7747 Bin needed
  • From: rr <RRauscher@nni.com>
• Re: PCM Questions
  • From: "nacelp" <nacelp@bright.net>
• Re: LS1 in 64 Impala SS
  • From: "Dave & Irina Eicher" <sailors@mwci.net>
• Re: GM Powertrain
  • From: ron harris <harris1@execpc.com>
• Re: 7747 Bin needed
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Paddle Shifters - Electronic Trans Controller
  • From: "Swayze" <kswayze@bellsouth.net>
• power towers ??
  • From: "Programmer" <nwester@eidnet.org>
• Re: power towers ??
  • From: "nacelp" <nacelp@bright.net>
• Re: MAP signal dampening
  • From: Tom Sharpe <twsharpe@mtco.com>
• Re: MAP signal dampening
  • From: "Programmer" <nwester@eidnet.org>
• Re: power towers ??
  • From: "Programmer" <nwester@eidnet.org>
• Re: power towers ??
  • From: "nacelp" <nacelp@bright.net>
• Re: LS1 in 64 Impala SS
  • From: "alexpeper" <alexpeper@email.msn.com>
• GM circuit numbering
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: GM circuit numbering
  • From: "nacelp" <nacelp@bright.net>
• DIS again
  • From: "Swayze" <kswayze@bellsouth.net>
• Newbies, and archives
  • From: "nacelp" <nacelp@bright.net>
• Re: DIS again
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: 1228331 (16157364?)
  • From: Marc Randolph <mrand@pobox.com>
• Re: LS1 in 64 Impala SS
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: power towers ??
  • From: "Programmer" <nwester@eidnet.org>
• Re: power towers ??
  • From: "nacelp" <nacelp@bright.net>
• RE: Paddle Shifters - Electronic Trans Controller
  • From: Scott Parkhurst <ScottP@mcmullenargus.com>
• Re: GM circuit numbering
  • From: steve ravet <sravet@arm.com>
• Re: LS1 in 64 Impala SS
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: 1228331 (16157364?)
  • From: "superchevy" <superchevyparts@mindspring.com>
• Re: Paddle Shifters - Electronic Trans Controller
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Cam tuning
  • From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
• Re: Newbies, and archives
  • From: Doug Dayson <djdayson@ix.netcom.com>
• Re: Cam tuning
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• RE: Paddle Shifters - Electronic Trans Controller
  • From: Scott Parkhurst <ScottP@mcmullenargus.com>
• Re: Paddle Shifters - Electronic Trans Controller
  • From: "Swayze" <kswayze@bellsouth.net>
• RE: Paddle Shifters - Electronic Trans Controller
  • From: Scott Parkhurst <ScottP@mcmullenargus.com>
• Re: LS1 in 64 Impala SS
  • From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
• Re: Cam tuning
  • From: "nacelp" <nacelp@bright.net>
• Re: Cam tuning
  • From: "nacelp" <nacelp@bright.net>
• Re: Cam tuning
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• RE: Cam tuning
  • From: "the Fredericks" <fredericksk@worldnet.att.net>
• Help with '85 Corvette '870 ECM
  • From: "Craig Marcho" <marcho@global101.com>
• RE: Cam tuning
  • From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
• cam tuning
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: Cam tuning
  • From: "Robert Eickhorst" <rleickho@home.com>
• Re: Cam tuning
  • From: "nacelp" <nacelp@bright.net>
• Re: Cam tuning
  • From: "nacelp" <nacelp@bright.net>
• RE: Cam tuning
  • From: "the Fredericks" <fredericksk@worldnet.att.net>
• added baro sensor to 730
  • From: jsg@jsgpc.mrcday.com
• Speedo scaler
  • From: "nacelp" <nacelp@bright.net>
• RE: Cam tuning
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: PCM Questions
  • From: Ludis Langens <ludis@cruzers.com>
• TBI vs Port Injected
  • From: "Rich Vandervoort" <richvandervoort@hotmail.com>
• Re: Cam tuning
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: Cam tuning
  • From: "nacelp" <nacelp@bright.net>
• Re: Speedo scaler
  • From: PCMdoc <PCMdoc@surfree.com>
• Re: TBI vs Port Injected
  • From: "nacelp" <nacelp@bright.net>
• Re: added baro sensor to 730
  • From: "nacelp" <nacelp@bright.net>
• Re: Speedo scaler
  • From: "nacelp" <nacelp@bright.net>
• Re: TBI vs Port Injected
  • From: Chipsbyal@aol.com
• Re: Speedo scaler
  • From: PCMdoc <PCMdoc@surfree.com>
• Re: 1228331 (16157364?)
  • From: "superchevy" <superchevyparts@mindspring.com>
• Re: 1228331 (16157364?)
  • From: "nacelp" <nacelp@bright.net>
• Re: added baro sensor to 730
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: Cam tuning
  • From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
• Re: TBI vs Port Injected
  • From: Doug Dayson <djdayson@ix.netcom.com>
• Re: Cam tuning
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Speedo scaler
  • From: Ken Kelly <kenkelly@lucent.com>
• Re: Cam tuning
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: Cam tuning
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: Help with '85 Corvette '870 ECM
  • From: "superchevy" <superchevyparts@mindspring.com>
• Re: Help with '85 Corvette '870 ECM
  • From: Gabe <gellett@earthlink.net>
• Re: Speedo scaler
  • From: "nacelp" <nacelp@bright.net>
• RE: Help with '85 Corvette '870 ECM
  • From: "Craig Marcho" <marcho@global101.com>
• Re: added baro sensor to 730
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Help with '85 Corvette '870 ECM
  • From: "nacelp" <nacelp@bright.net>
• Re: added baro sensor to 730
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: 1228331 (16157364?)
  • From: Shannen Durphey <shannen@grolen.com>
• Re: added baro sensor to 730
  • From: "nacelp" <nacelp@bright.net>
• Re: 1228331 (16157364?)
  • From: "Robert Eickhorst" <rleickho@home.com>
• Re: Cam tuning
  • From: "nacelp" <nacelp@bright.net>
• RE: 1228331 (16157364?)
  • From: "the Fredericks" <fredericksk@worldnet.att.net>
• Re: TBI vs Port Injected
  • From: "nacelp" <nacelp@bright.net>
• Re: 1228331 (16157364?)
  • From: "C and T" <candt@techcom.net>
• Re: TBI vs Port Injected
  • From: Ward <WSpoonemore@excite.com>
• Re: Cam tuning
  • From: "nacelp" <nacelp@bright.net>
• Re: Cam tuning
  • From: ECMnut@aol.com
• RE: 1228331 (16157364?)
  • From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
• RE: 1228331 (16157364?)
  • From: Carl Summers <InTech@writeme.com>
• RE: 1228331 (16157364?)
  • From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: 1228331 (16157364?)
  • From: ECMnut@aol.com
• Re: 1228331 (16157364?)
  • From: "superchevy" <superchevyparts@mindspring.com>
• Re: TBI vs Port Injected
  • From: "Rich Vandervoort" <richvandervoort@hotmail.com>
• Re: TBI vs Port Injected
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: TBI vs Port Injected
  • From: ECMnut@aol.com
• Re: TBI vs Port Injected
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: 1228331 (16157364?)
  • From: Tyler Townsley <ttownsley@sprynet.com>
• Re: TBI vs Port Injected
  • From: "nacelp" <nacelp@bright.net>
• Re: Cam tuning
  • From: Scott Knight <scott@scottknight.com>
• MAF part no needed 88 vin C
  • From: "nacelp" <nacelp@bright.net>
• Re: Cam tuning
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Cam tuning
  • From: Scott Knight <scott@scottknight.com>
• Re: Cam tuning
  • From: Shannen Durphey <shannen@grolen.com>
• BLM collection!?
  • From: "Kevin Reynolds" <kereyn@gte.net>
• 88 asd super chip
  • From: "Mike" <Itsmike@lvcm.com>
• Re: Cam tuning
  • From: Scott Knight <scott@scottknight.com>
• Re: 88 asd super chip
  • From: Mark Romans <romans@pacbell.net>
• Driving an HEI Module with other signals
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Driving an HEI Module with other signals
  • From: Bob Valentine <bob@tecmark.com>
• Re: Cam tuning
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Cam tuning
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Driving an HEI Module with other signals
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 88 asd super chip
  • From: "nacelp" <nacelp@bright.net>
• Re: Driving an HEI Module with other signals
  • From: "nacelp" <nacelp@bright.net>
• Re: Driving an HEI Module with other signals
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: Driving an HEI Module with other signals
  • From: "mike mager" <mikemager@hotmail.com>
• RE: Driving an HEI Module with other signals
  • From: Don.F.Broadus@ucm.com
• Re: Driving an HEI Module with other signals
  • From: Mike Veldman <vmike@email.ceat.okstate.edu>
• RE: Driving an HEI Module with other signals
  • From: Don.F.Broadus@ucm.com
• A/F gauges and O2 sensors.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Driving an HEI Module with other signals
  • From: "nacelp" <nacelp@bright.net>
• Re: A/F gauges and O2 sensors.
  • From: "nacelp" <nacelp@bright.net>
• RE: Distributor Machine/Ignition Tests
  • From: Don.F.Broadus@ucm.com
• RE: Distributor Machine/Ignition Tests
  • From: Mike Veldman <vmike@email.ceat.okstate.edu>
• HEI Module versions?
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Cam tuning
  • From: Ludis Langens <ludis@cruzers.com>
• RE: HEI Module versions?
  • From: Don.F.Broadus@ucm.com
• Re: HEI Module versions?
  • From: Ludis Langens <ludis@cruzers.com>
• RE: HEI Module versions?
  • From: Don.F.Broadus@ucm.com
• Re: HEI Module versions?
  • From: "nacelp" <nacelp@bright.net>
• Re: Cam tuning
  • From: "nacelp" <nacelp@bright.net>
• Re: Cam tuning
  • From: Scott Knight <scott@scottknight.com>
• Re: 88 asd super chip
  • From: "Programmer" <nwester@eidnet.org>
• E-prom ereaser& burner
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: E-prom ereaser& burner
  • From: "black maj" <blackmin@hotmail.com>
• RE: E-prom ereaser& burner
  • From: "Craig Marcho" <marcho@global101.com>
• Re: E-prom ereaser& burner
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: E-prom ereaser& burner
  • From: "nacelp" <nacelp@bright.net>
• Re: Cam tuning
  • From: "nacelp" <nacelp@bright.net>
• Re: E-prom ereaser& burner
  • From: "nacelp" <nacelp@bright.net>
• Re: E-prom ereaser& burner
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: E-prom ereaser& burner
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: E-prom ereaser& burner
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: E-prom ereaser& burner
  • From: "nacelp" <nacelp@bright.net>
• Re: E-prom ereaser& burner
  • From: ECMnut@aol.com
• Re: E-prom ereaser& burner
  • From: ECMnut@aol.com
• Re: 88 asd super chip
  • From: Ward <WSpoonemore@excite.com>
• Re: E-prom ereaser& burner
  • From: "NickG" <nikog@mediaone.net>
• VE table 1 & 2 relationship, and BLMs past 3600rpm.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: E-prom ereaser& burner
  • From: Bob Valentine <bob@tecmark.com>
• Re: E-prom ereaser& burner
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: E-prom ereaser& burner
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: E-prom ereaser& burner
  • From: Bob Valentine <bob@tecmark.com>
• Re: E-prom ereaser& burner
  • From: Keith <kgil1@tampabay.rr.com>
• Archives
  • From: Keith <kgil1@tampabay.rr.com>
• Re: E-prom ereaser& burner
  • From: "JN" <jwn@sgi.net>
• Re: E-prom ereaser& burner
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: VE table 1 & 2 relationship, and BLMs past 3600rpm.
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: E-prom ereaser& burner
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: E-prom ereaser& burner
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: E-prom ereaser& burner
  • From: "Programmer" <nwester@eidnet.org>
• Re: E-prom ereaser& burner
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: E-prom ereaser& burner
  • From: steve ravet <sravet@arm.com>
• Reconditioned PB10s $40 off was E-prom burner & eraser.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: VE table 1 & 2 relationship, and BLMs past 3600rpm.
  • From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
• Re: VE table 1 & 2 relationship, and BLMs past 3600rpm.
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: E-prom ereaser& burner
  • From: "nacelp" <nacelp@bright.net>
• Re: E-prom ereaser& burner
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: E-prom ereaser& burner
  • From: "nacelp" <nacelp@bright.net>
• Re: E-prom ereaser& burner
  • From: David Cooley <n5xmt@bellsouth.net>
• ECMS for sale
  • From: "nacelp" <nacelp@bright.net>
• Re: E-prom ereaser& burner
  • From: "Dr.Acacio" <aortiz@w3ti.com.br>
• Emulator
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: VE table 1 & 2 relationship, and BLMs past 3600rpm.
  • From: Ward <WSpoonemore@excite.com>
• Re: BLM collection!?
  • From: "Edward J. Malkiewicz" <krazyed@worldnet.att.net>
• Re: BLM collection!?
  • From: "Edward J. Malkiewicz" <krazyed@worldnet.att.net>
• Re: E-prom ereaser& burner
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• First GN chip
  • From: "nacelp" <nacelp@bright.net>
• Re: BLM collection!?
  • From: JTesta1966@aol.com
• Re: First GN chip
  • From: JTesta1966@aol.com
• Re: First GN chip
  • From: "nacelp" <nacelp@bright.net>
• Re: First GN chip
  • From: DC Smith <morepoweral@tetranet.net>
• Re: E-prom ereaser& burner
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: First GN chip
  • From: "Programmer" <nwester@eidnet.org>
• Checksum questions
  • From: Bob Valentine <bob@tecmark.com>
• Re: First GN chip
  • From: "nacelp" <nacelp@bright.net>
• RE: First GN chip
  • From: "the Fredericks" <fredericksk@worldnet.att.net>
• Re: First GN chip
  • From: "nacelp" <nacelp@bright.net>
• Re: Checksum questions
  • From: "nacelp" <nacelp@bright.net>
• Re: First GN chip
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: First GN chip
  • From: "nacelp" <nacelp@bright.net>
• Re: Checksum questions
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: First GN chip
  • From: "nacelp" <nacelp@bright.net>
• Re: Checksum questions
  • From: "TK" <terryk@foothill.net>
• Re: Checksum questions
  • From: Bob Valentine <bob@tecmark.com>
• Re: First GN chip
  • From: JTesta1966@aol.com
• Re: Checksum questions
  • From: ECMnut@aol.com
• Re: First GN chip
  • From: JTesta1966@aol.com
• Re: First GN chip
  • From: "nacelp" <nacelp@bright.net>
• Re: First GN chip
  • From: "nacelp" <nacelp@bright.net>
• Did I miss something?
  • From: BBadMonkey@aol.com
• Re: Pocket Programmer
  • From: "John T. Martin" <gmman@eskimo.com>
• Re: Pocket Programmer , brain fade
  • From: "John T. Martin" <gmman@eskimo.com>
• Re: GM Alternate fuel service manuals
  • From: "John T. Martin" <gmman@eskimo.com>
• New member with VE table Q's
  • From: Joe Shuhy <shuhy@cfl.rr.com>
• Re: Checksum questions
  • From: Bob Valentine <bob@tecmark.com>
• Re: Checksum questions
  • From: "TK" <terryk@foothill.net>
• Re: Checksum questions
  • From: "nacelp" <nacelp@bright.net>
• Re: New member with VE table Q's
  • From: "nacelp" <nacelp@bright.net>
• Re: Checksum questions
  • From: "nacelp" <nacelp@bright.net>
• ND 1181281
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Checksum questions
  • From: ECMnut@aol.com
• ECM compatibility
  • From: "C and T" <candt@techcom.net>
• Re: Checksum questions
  • From: "nacelp" <nacelp@bright.net>
• Re: ECM compatibility
  • From: "nacelp" <nacelp@bright.net>
• Re: Checksum questions
  • From: ECMnut@aol.com
• Re: Checksum questions
  • From: "TK" <terryk@foothill.net>
• Re: Checksum questions
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Checksum questions
  • From: "nacelp" <nacelp@bright.net>
• Quad-4 (1228707 ECM) Rough Idle Problem
  • From: Will Remaklus <remaklus@attglobal.net>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: ECMnut@aol.com
• Re: Checksum questions
  • From: DC Smith <morepoweral@tetranet.net>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: Will Remaklus <remaklus@attglobal.net>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: ECMnut@aol.com
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: "nacelp" <nacelp@bright.net>
• Re: Did I miss something?
  • From: steve ravet <sravet@arm.com>
• Re: 1228331 (16157364?)
  • From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
• Re: 1228331 (16157364?)
  • From: "Jeff Kopp" <jkopp@direcpc.com>
• Re: Checksum questions
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Checksum questions
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Xeltek EPROM Programmers (Pls Read)
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• mil light
  • From: "Mike" <Itsmike@lvcm.com>
• Re: 1228331 (16157364?)
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: mil light
  • From: "nacelp" <nacelp@bright.net>
• Re: mil light
  • From: PCMdoc <PCMdoc@surfree.com>
• Bosch ABS info
  • From: Stuart Bunning <stuart@kenelec.com.au>
• Re: Xeltek EPROM Programmers (Pls Read)
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Checksum questions
  • From: DC Smith <morepoweral@tetranet.net>
• 52 Lb injectors
  • From: DC Smith <morepoweral@tetranet.net>
• Injector Problem
  • From: Carl Summers <InTech@writeme.com>
• MEFI3 was GM Powertrain
  • From: 303print <303print@northrim.net>
• Re: Injector Problem
  • From: "nacelp" <nacelp@bright.net>
• Re: 1228331 (16157364?)
  • From: "superchevy" <superchevyparts@mindspring.com>
• new subscriber please help ecm problem
  • From: Ed Stoll <edstoll2019@yahoo.com>
• Scanners vs Diacom (and recording scanners)
  • From: "nacelp" <nacelp@bright.net>
• Re: new subscriber please help ecm problem
  • From: PAULMARKAD@aol.com
• Re: Injector Problem
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: Injector Problem
  • From: Shannen Durphey <shannen@grolen.com>
• Re: A/F gauges and O2 sensors.
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: Xeltek EPROM Programmers (Pls Read)
  • From: Bob Valentine <bob@tecmark.com>
• Re: Injector Problem
  • From: PAULMARKAD@aol.com
• GM Alternate fuel service manuals
  • From: PHXSYS@aol.com
• Wastegate Controller
  • From: "nacelp" <nacelp@bright.net>
• Re: new subscriber please help ecm problem
  • From: "nacelp" <nacelp@bright.net>
• Re: Xeltek EPROM Programmers (Pls Read)
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Bosch ABS info
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: Will Remaklus <remaklus@attglobal.net>
• Re: GM Alternate fuel service manuals
  • From: kb4mxo <kb4mxo@mwt.net>
• Re: new subscriber please help ecm problem
  • From: Rex Weatherford <rex.weatherford@terraglyph.com>
• [no subject]
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Re: GM Alternate fuel service manuals
  • From: PHXSYS@aol.com
• Re: GM Alternate fuel service manuals
  • From: PHXSYS@aol.com
• Re: Injector Problem
  • From: "Mike (Perth, Western Australia)" <erazmus@wantree.com.au>
• RE: Wastegate Controller
  • From: "Michael Adams" <michaeladams1@compuserve.com>
• Re: GM Alternate fuel service manuals
  • From: Chipsbyal@aol.com
• Re: new subscriber please help ecm problem
  • From: Shannen Durphey <shannen@grolen.com>
• Re: GM Alternate fuel service manuals
  • From: "Mike (Perth, Western Australia)" <erazmus@wantree.com.au>
• Re: new subscriber please help ecm problem
  • From: "nacelp" <nacelp@bright.net>
• Re: new subscriber please help ecm problem
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: GM Alternate fuel service manuals
  • From: "Mike (Perth, Western Australia)" <erazmus@wantree.com.au>
• Boost controller
  • From: "nacelp" <nacelp@bright.net>
• Re: new subscriber please help ecm problem
  • From: Ed Stoll <edstoll2019@yahoo.com>
• Re: Wastegate Controller
  • From: JTesta1966@aol.com
• 7749 guru needed....
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re:alldata/was new subscriber please help ecm problem
  • From: Mike Rolica <97005620@lambton.on.ca>
• Re: GM Alternate fuel service manuals
  • From: Dig <turbodig@yahoo.com>
• GM Eprom Bin file
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Bins are us
  • From: "nacelp" <nacelp@bright.net>
• Re: 7749 guru needed....
  • From: "nacelp" <nacelp@bright.net>
• Re: GM Alternate fuel service manuals
  • From: PHXSYS@aol.com
• Re: Bins are us
  • From: steve ravet <sravet@arm.com>
• Re: Wastegate Controller
  • From: DC Smith <morepoweral@tetranet.net>
• Re: 7749 guru needed....
  • From: Barry Tisdale <btisdale@cybersol.com>
• V6 ALDL Communications
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: new subscriber please help ecm problem
  • From: "alexpeper" <alexpeper@email.msn.com>
• GM 4 cylinder DIS
  • From: "Jurgen Hartwig" <turbo6bar@hotmail.com>
• Re: GM 4 cylinder DIS
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: GM 4 cylinder DIS
  • From: PAULMARKAD@aol.com
• Non efi, ecm, CCC (Really OLD ECM!)
  • From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
• Re: V6 ALDL Communications
  • From: Ludis Langens <ludis@cruzers.com>
• Re: GM 4 cylinder DIS
  • From: "nacelp" <nacelp@bright.net>
• Re: Non efi, ecm, CCC (Really OLD ECM!)
  • From: "C and T" <candt@techcom.net>
• Re: V6 ALDL Communications
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Bins are us
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: GM 4 cylinder DIS
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: new subscriber please help ecm problem
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: GM Alternate fuel service manuals
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• RE: Bins are us
  • From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: Non efi, ecm, CCC (Really OLD ECM!)
  • From: "nacelp" <nacelp@bright.net>
• Re: Wastegate Controller
  • From: "Jason R. Haines" <jhaines@lingenfelter.com>
• Re: Wastegate Controller
  • From: "nacelp" <nacelp@bright.net>
• Re: GM 4 cylinder DIS
  • From: "Jurgen Hartwig" <turbo6bar@hotmail.com>
• 77 caddy manual
  • From: "Swayze" <kswayze@bellsouth.net>
• Bins are us
  • From: "nacelp" <nacelp@bright.net>
• Re: GM 4 cylinder DIS
  • From: "nacelp" <nacelp@bright.net>
• spking of octane was Re: Bins are us
  • From: "Swayze" <kswayze@bellsouth.net>
• RE: spking of octane was Re: Bins are us
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: Bins are us
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: spking of octane was Re: Bins are us
  • From: "Swayze" <kswayze@bellsouth.net>
• RE: Bins are us
  • From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
• Re: spking of octane was Re: Bins are us
  • From: "nacelp" <nacelp@bright.net>
• Re: Bins are us
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: spking of octane was Re: Bins are us
  • From: "nacelp" <nacelp@bright.net>
• Re: Bins are us
  • From: "Programmer" <nwester@eidnet.org>
• Re: Wastegate Controller
  • From: DC Smith <morepoweral@tetranet.net>
• Re: Bins are us
  • From: Bob Valentine <bob@tecmark.com>
• Re: Bins are us
  • From: "nacelp" <nacelp@bright.net>
• Re: Bins are us
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: V6 ALDL Communications
  • From: "nacelp" <nacelp@bright.net>
• Re: V6 ALDL Communications
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Bins are us
  • From: Shannen Durphey <shannen@grolen.com>
• Re: GM Alternate fuel service manuals
  • From: PHXSYS@aol.com
• RE: Bins are us
  • From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: Bins are us
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 7749 guru needed....
  • From: "nacelp" <nacelp@bright.net>
• Re: GM Eprom Bin file
  • From: "nacelp" <nacelp@bright.net>
• Pocket Programmer
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Bins are us
  • From: "Programmer" <nwester@eidnet.org>
• Re: Pocket Programmer
  • From: JTesta1966@aol.com
• Re: Pocket Programmer/thanks
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Pocket Programmer/thanks
  • From: JTesta1966@aol.com
• Prom ID's
  • From: "TK" <terryk@foothill.net>
• Re: GM Eprom Bin file
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Pocket Programmer
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Pocket Programmer/thanks
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Pocket Programmer
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: 7749 guru needed....
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Bins are us
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 7749 guru needed....
  • From: "nacelp" <nacelp@bright.net>
• Re: GM Alternate fuel service manuals
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: 7749 guru needed....
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: 7749 guru needed....
  • From: "TK" <terryk@foothill.net>
• Re: 7749 guru needed....
  • From: "nacelp" <nacelp@bright.net>
• Re: 7749 guru needed....
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: 7749 guru needed....
  • From: "nacelp" <nacelp@bright.net>
• Re: Pocket Programmer/Finished <(©¿©)>
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: 7749 guru needed....
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 7749 guru needed....
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: 7749 guru needed....
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: Will Remaklus <remaklus@attglobal.net>
• RE: 7749 guru needed....
  • From: "Jim Sloan" <leroy@sunflower.com>
• Re: Pocket Programmer/Finished <(©¿©)>
  • From: DC Smith <morepoweral@tetranet.net>
• RE: 7749 guru needed....
  • From: Barry Tisdale <btisdale@cybersol.com>
• Fw: MSD sellin Crap Still
  • From: "nacelp" <nacelp@bright.net>
• Re: 7749 guru needed....
  • From: "TK" <terryk@foothill.net>
• Re: Fw: MSD sellin Crap Still
  • From: kb4mxo <kb4mxo@mwt.net>
• Re: Fw: MSD sellin Crap Still
  • From: "nacelp" <nacelp@bright.net>
• Re: Fw: MSD sellin Crap Still
  • From: kb4mxo <kb4mxo@mwt.net>
• Re: Fw: MSD sellin Crap Still
  • From: kb4mxo <kb4mxo@mwt.net>
• Re: Fw: MSD sellin Crap Still
  • From: MdntRdr1@aol.com
• Re: Fw: MSD sellin Crap Still
  • From: "nacelp" <nacelp@bright.net>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 7749 guru needed....
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 7749 guru needed....
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: Will Remaklus <remaklus@attglobal.net>
• Re: 7749 guru needed....
  • From: "Green" <green@dsl.telocity.com>
• What is the dynamic range of the AFR sweeps across stoichiometric?
  • From: "mike mager" <mikemager@hotmail.com>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: "nacelp" <nacelp@bright.net>
• Re: What is the dynamic range of the AFR sweeps across stoichiometric?
  • From: "nacelp" <nacelp@bright.net>
• Quick question on coolant temp sensors
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Quick question on coolant temp sensors
  • From: "nacelp" <nacelp@bright.net>
• ignition map
  • From: John_Calabrese@ENGELHARD.COM
• Re: What is the dynamic range of the AFR sweeps across stoichiometric?
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: ignition map
  • From: "nacelp" <nacelp@bright.net>
• Stupid question on fuel pressure
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: basic chevy tbi question
  • From: Hotrodderzzz@aol.com
• RE: ignition map
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: ignition map
  • From: John_Calabrese@ENGELHARD.COM
• Re: basic chevy tbi question
  • From: "nacelp" <nacelp@bright.net>
• Re: ignition map
  • From: "nacelp" <nacelp@bright.net>
• Re: Driving an HEI Module with other signals
  • From: Mike Veldman <vmike@email.ceat.okstate.edu>
• Re: ignition map
  • From: "nacelp" <nacelp@bright.net>
• Re: Stupid question on fuel pressure
  • From: "nacelp" <nacelp@bright.net>
• Maps, and newbie stuff
  • From: "nacelp" <nacelp@bright.net>
• Re: Stupid question on fuel pressure
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Quick question on coolant temp sensors
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• RE: Stupid question on fuel pressure
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Novice Question
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• RE: Novice Question
  • From: Carl Summers <InTech@writeme.com>
• Re: Novice Question
  • From: "Jeff Flanary" <jefff@mounet.com>
• Re: Stupid question on fuel pressure
  • From: Ward <WSpoonemore@excite.com>
• Re: Driving an HEI Module with other signals
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Driving an HEI Module with other signals
  • From: "Programmer" <nwester@eidnet.org>
• RE: Novice Question
  • From: Bob Valentine <bob@tecmark.com>
• Re: Novice Question
  • From: "nacelp" <nacelp@bright.net>
• RE: Novice Question
  • From: Carl Summers <InTech@writeme.com>
• Re: Novice Question
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: 7749 guru needed....
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: 7749 guru needed....
  • From: "Green" <green@dsl.telocity.com>
• Re: Novice Question
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Driving an HEI Module with other signals
  • From: Ward <WSpoonemore@excite.com>
• Re: Driving an HEI Module with other signals
  • From: "Programmer" <nwester@eidnet.org>
• Re: Novice Question
  • From: Ludis Langens <ludis@cruzers.com>
• Calpak
  • From: "Jeff Flanary" <jefff@mounet.com>
• Re: Calpak
  • From: "nacelp" <nacelp@bright.net>
• RE: Novice Question
  • From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
• Re: Novice Question
  • From: "nacelp" <nacelp@bright.net>
• RE: Novice Question
  • From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
• Emulator Software
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• RE: Emulator Software
  • From: Eric Aos <EOA@spartek.com>
• Re: Novice Question
  • From: "nacelp" <nacelp@bright.net>
• Re: Novice Question
  • From: David Cooley <n5xmt@bellsouth.net>
• EMulator checks
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Novice Question
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Novice Question
  • From: Shannen Durphey <shannen@grolen.com>
• Knock @ 1975 RPMs
  • From: Barry Tisdale <btisdale@cybersol.com>
• Pocket Programmer & Emulator
  • From: DC Smith <morepoweral@tetranet.net>
• Re: Knock @ 1975 RPMs
  • From: "nacelp" <nacelp@bright.net>
• Re: Pocket Programmer & Emulator
  • From: JTesta1966@aol.com
• Re: Novice Question
  • From: Pat Ford <pford@qnx.com>
• Re: Pocket Programmer & Emulator
  • From: DC Smith <morepoweral@tetranet.net>
• Re: Knock @ 1975 RPMs
  • From: Barry Tisdale <btisdale@cybersol.com>
• Second O2 sensor guestion
  • From: "nacelp" <nacelp@bright.net>
• Re: Second O2 sensor guestion
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Pocket Programmer & Emulator
  • From: JTesta1966@aol.com
• EGR
  • From: "Rich Vandervoort" <richvandervoort@hotmail.com>
• Re: Pocket Programmer & Emulator
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Re: EGR
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Pocket Programmer & Emulator
  • From: DC Smith <morepoweral@tetranet.net>
• Re: Pocket Programmer & Emulator
  • From: "Jeff Flanary" <jefff@mounet.com>
• Re: Pocket Programmer & Emulator
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Knock @ 1975 RPMs
  • From: "nacelp" <nacelp@bright.net>
• Disposable meter
  • From: "nacelp" <nacelp@bright.net>
• Re: Knock @ 1975 RPMs
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Pocket Programmer & Emulator
  • From: DC Smith <morepoweral@tetranet.net>
• Re: Disposable meter
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Second O2 sensor guestion
  • From: JTesta1966@aol.com
• Re: Second O2 sensor guestion
  • From: JTesta1966@aol.com
• Re: Knock @ 1975 RPMs
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: david garnier <garnierd@uwm.edu>
• Re: Knock sensor selection for 383 SBC
  • From: "nacelp" <nacelp@bright.net>
• Re: Bins are us
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: Knock sensor selection for 383 SBC
  • From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
• Re: EGR
  • From: "Programmer" <nwester@eidnet.org>
• Re: Pocket Programmer & Emulator
  • From: "Jeff M" <tystorm@email.msn.com>
• Knock sensor selection for 383 SBC
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Knock sensor selection for 383 SBC
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• RE: Wastegate Controller
  • From: "Michael Adams" <michaeladams1@compuserve.com>
• Turbo MAP & MAT interaction
  • From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: Turbo MAP & MAT interaction
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: Will Remaklus <remaklus@attglobal.net>
• RE: Turbo MAP & MAT interaction
  • From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
• RE: Knock sensor selection for 383 SBC
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: Turbo MAP & MAT interaction
  • From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: Knock sensor selection for 383 SBC
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Turbo MAP & MAT interaction
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: "nacelp" <nacelp@bright.net>
• CCC Pinout needed
  • From: "nacelp" <nacelp@bright.net>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: Will Remaklus <remaklus@attglobal.net>
• Re: CCC Pinout needed
  • From: John_Calabrese@ENGELHARD.COM
• Re: Knock sensor selection for 383 SBC
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: CCC Pinout needed
  • From: "nacelp" <nacelp@bright.net>
• Re: CCC Pinout needed
  • From: JTesta1966@aol.com
• eprom
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: eprom
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Turbo MAP & MAT interaction
  • From: "nacelp" <nacelp@bright.net>
• Re: CCC Pinout needed
  • From: "nacelp" <nacelp@bright.net>
• Re: Turbo MAP & MAT interaction
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Turbo MAP & MAT interaction
  • From: "nacelp" <nacelp@bright.net>
• Re: eprom
  • From: Andrew Mattei <amattei@mindspring.com>
• 2000 RPM knock
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 2000 RPM knock
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: "nacelp" <nacelp@bright.net>
• Re: 2000 RPM knock
  • From: "nacelp" <nacelp@bright.net>
• Re: 2000 RPM knock
  • From: "Green" <green@dsl.telocity.com>
• Re: GMECM Digest V2 #149
  • From: Dig <turbodig@yahoo.com>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: remaklus@attglobal.net
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: remaklus@attglobal.net
• Re: Turbo MAP & MAT interaction
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: GMECM Digest V2 #149
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Knock sensor selection for 383 SBC
  • From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
• manifold machining
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: manifold machining
  • From: "nacelp" <nacelp@bright.net>
• Re: manifold machining
  • From: Frederic Breitwieser <frederic@xephic.dynip.com>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: "mike mager" <mikemager@hotmail.com>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: "mike mager" <mikemager@hotmail.com>
• Re: Knock sensor selection for 383 SBC
  • From: "Programmer" <nwester@eidnet.org>
• Sensitivity of GM Knock Sensors
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• RE: Turbo MAP & MAT interaction
  • From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: manifold machining
  • From: "cbrooks1 " <cbrooks1@mail.tqci.net>
• Fw: Need help with Opel...
  • From: "Ron Gregory" <syclone@home.com>
• Re: Pocket Programmer & Emulator
  • From: DC Smith <morepoweral@tetranet.net>
• Re: Turbo MAP & MAT interaction
  • From: "nacelp" <nacelp@bright.net>
• Pocket Programmer
  • From: "Jeff Flanary" <jefff@mounet.com>
• Re: manifold machining
  • From: David Cooley <n5xmt@bellsouth.net>
• RE: manifold machining
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Re: manifold machining
  • From: John_Calabrese@ENGELHARD.COM
• RE: manifold machining
  • From: John_Calabrese@ENGELHARD.COM
• Re: manifold machining
  • From: "nacelp" <nacelp@bright.net>
• Re: manifold machining
  • From: "nacelp" <nacelp@bright.net>
• Re: Pocket Programmer
  • From: "Programmer" <nwester@eidnet.org>
• RE: manifold machining
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Re: manifold machining
  • From: "nacelp" <nacelp@bright.net>
• Re: manifold machining
  • From: "nacelp" <nacelp@bright.net>
• RE: manifold machining
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• RE: manifold machining
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Re: Pocket Programmer
  • From: "Jeff Flanary" <jefff@mounet.com>
• Re: Turbo MAP & MAT interaction
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Turbo MAP & MAT interaction
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Bowling for scripts:
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Pocket Programmer
  • From: "Programmer" <nwester@eidnet.org>
• Re: Pocket Programmer
  • From: "nacelp" <nacelp@bright.net>
• ever heard of this ECM?
  • From: "NickG" <nikog@mediaone.net>
• Re: ever heard of this ECM?
  • From: "TK" <terryk@foothill.net>
• Re: ever heard of this ECM?
  • From: ECMnut@aol.com
• Re: ever heard of this ECM?
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: Brent Obermiller <ober_b@sssnet.com>
• RE: Turbo MAP & MAT interaction
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: LS1 Pinouts
  • From: "Jason R. Haines" <jhaines@lingenfelter.com>
• RE: Turbo MAP & MAT interaction
  • From: David Cooley <n5xmt@bellsouth.net>
• TurboLink [was Re: Wastegate Controller]
  • From: "Jason R. Haines" <jhaines@lingenfelter.com>
• ONE WIRE O2 TO HEATED O2
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: Need help with Opel...
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: ONE WIRE O2 TO HEATED O2
  • From: "nacelp" <nacelp@bright.net>
• Re: Sensitivity of GM Knock Sensors
  • From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
• Re: ONE WIRE O2 TO HEATED O2
  • From: "nacelp" <nacelp@bright.net>
• Sensitivity of GM Knock Sensors
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: ONE WIRE O2 TO HEATED O2
  • From: Chipsbyal@aol.com
• Re: ONE WIRE O2 TO HEATED O2
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: ONE WIRE O2 TO HEATED O2
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: ONE WIRE O2 TO HEATED O2
  • From: Shannen Durphey <shannen@grolen.com>
• Re: ONE WIRE O2 TO HEATED O2
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Turbo MAP & MAT interaction
  • From: Scot Sealander <Sealand@clarityconnect.com>
• RE: manifold machining
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: Sensitivity of GM Knock Sensors
  • From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
• Re: manifold machining
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Sensitivity of GM Knock Sensors
  • From: "nacelp" <nacelp@bright.net>
• Re: Sensitivity of GM Knock Sensors
  • From: "nacelp" <nacelp@bright.net>
• Re: manifold machining
  • From: "mike mager" <mikemager@hotmail.com>
• Re: manifold machining
  • From: "nacelp" <nacelp@bright.net>
• Sensitivity of GM Knock Sensors.
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: ONE WIRE O2 TO HEATED O2
  • From: "Mike (Perth, Western Australia)" <erazmus@wantree.com.au>
• Re: manifold machining
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• RE: Sensitivity of GM Knock Sensors
  • From: Carl Summers <InTech@writeme.com>
• Re: manifold machining
  • From: Frederic Breitwieser <frederic@xephic.dynip.com>
• Re: Sensitivity of GM Knock Sensors.
  • From: "nacelp" <nacelp@bright.net>
• Re: Sensitivity of GM Knock Sensors.
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: manifold machining
  • From: David Cooley <n5xmt@bellsouth.net>
• Hardware/software questions...
  • From: "Steve Cauffiel" <cauffiel@erols.com>
• Re: Hardware/software questions...
  • From: "nacelp" <nacelp@bright.net>
• Re: Sensitivity of GM Knock Sensors
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: Sensitivity of GM Knock Sensors
  • From: "nacelp" <nacelp@bright.net>
• Re: Sensitivity of GM Knock Sensors
  • From: "nacelp" <nacelp@bright.net>
• Re: Hardware/software questions...
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Hardware/software questions...
  • From: "Programmer" <nwester@eidnet.org>
• Sensitivity of GM Knock Sensors
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: Hardware/software questions...
  • From: "Dave & Irina Eicher" <sailors@mwci.net>
• Re: Hardware/software questions...
  • From: "John M. Baltz" <jmbaltz@attglobal.net>
• Re: Sensitivity of GM Knock Sensors
  • From: "nacelp" <nacelp@bright.net>
• Re: Hardware/software questions...
  • From: "nacelp" <nacelp@bright.net>
• Programming Voltage
  • From: "Jeff Flanary" <jefff@mounet.com>
• Re: Hardware/software questions...
  • From: "Programmer" <nwester@eidnet.org>
• Digital Speedometer
  • From: cwagner@info2000.net
• RE: Digital Speedometer
  • From: Bob Currey <bcurrey@mediaone.net>
• Re: Programming Voltage
  • From: "nacelp" <nacelp@bright.net>
• Re: Digital Speedometer
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: Digital Speedometer
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: Digital Speedometer
  • From: Ade + Lamb Chop <alaw@mrc.soton.ac.uk>
• another Memcal ?
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: another Memcal ?
  • From: "nacelp" <nacelp@bright.net>
• Re: another Memcal ?
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• 4.3L S10 questions
  • From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
• Re: 4.3L S10 questions
  • From: Charles Morgan <charlesmorgan@home.com>
• Re: Hardware/software questions...
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: 4.3L S10 questions
  • From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
• Re: 4.3L S10 questions
  • From: "nacelp" <nacelp@bright.net>
• Re: 4.3L S10 questions
  • From: "EK" <sk8er@netmost.com>
• Re: 4.3L S10 questions
  • From: Chipsbyal@aol.com
• Re: Pocket Programmer & Emulator
  • From: "Jeff M" <tystorm@email.msn.com>
• Emulator
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: another Memcal ?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Hardware/software
  • From: "Steve Cauffiel" <cauffiel@erols.com>
• Re: manifold machining
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• efi chevy in a old ford
  • From: "Mike" <Itsmike@lvcm.com>
• Re: another Memcal ?
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: manifold machining
  • From: Frederic Breitwieser <frederic@xephic.dynip.com>
• Re: another Memcal ?
  • From: "nacelp" <nacelp@bright.net>
• Re: Hardware/software
  • From: "John M. Baltz" <jmbaltz@attglobal.net>
• PROGRAMING QUESTION
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: Emulator
  • From: "Jeff M" <tystorm@email.msn.com>
• 1228331 ECU Processor
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: 4.3L S10 questions
  • From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
• Re: 1228331 ECU Processor
  • From: steve ravet <sravet@arm.com>
• Re: Quad-4 (1228707 ECM) Rough Idle Problem
  • From: Rex Weatherford <rex.weatherford@mentisys.com>
• 2.8 maf to ad conversion.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Hardware/software
  • From: "Programmer" <nwester@eidnet.org>
• Re: 2.8 maf to ad conversion.
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: 2.8 maf to ad conversion.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: 2.8 maf to ad conversion.
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: 2.8 maf to ad conversion.
  • From: ECMnut@aol.com
• Re: Hardware/software
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: 2.8 maf to ad conversion.
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: 1228331 ECU Processor (P4 processor info)
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: 2.8 maf to ad conversion.
  • From: Chipsbyal@aol.com
• TBI to TPI Conversion
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• RE: Emulator
  • From: Carl Summers <InTech@writeme.com>
• Re: TBI to TPI Conversion
  • From: Chipsbyal@aol.com
• Re: TBI to TPI Conversion
  • From: Andrew Mattei <amattei@mindspring.com>
• Memcal ESC Filter Numbers
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: 1228331 ECU Processor (P4 processor info)
  • From: steve ravet <sravet@arm.com>
• Quad 4 W41 binary file
  • From: ronald.j.selberg@exgate.tek.com
• ASBX code is AMXY
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Digital Speedometer
  • From: cwagner@info2000.net
• Re: TBI to TPI Conversion
  • From: "nacelp" <nacelp@bright.net>
• Re: Emulator
  • From: "nacelp" <nacelp@bright.net>
• Re: 2.8 maf to ad conversion.
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 2.8 maf to ad conversion.
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Hardware/software
  • From: "nacelp" <nacelp@bright.net>
• Re: TBI to TPI Conversion
  • From: "nacelp" <nacelp@bright.net>
• Emissions and Chip Burning
  • From: "Craig Marcho" <marcho@global101.com>
• ECM in an Olds Bravada?
  • From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
• Re: Emissions and Chip Burning
  • From: "nacelp" <nacelp@bright.net>
• Re: ECM in an Olds Bravada?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: ECM in an Olds Bravada?
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: ECM in an Olds Bravada?
  • From: Charles Morgan <charlesmorgan@home.com>
• Re: ECM in an Olds Bravada?
  • From: "TK" <terryk@foothill.net>
• Old code 41
  • From: "nacelp" <nacelp@bright.net>
• Re: Old code 41Handled, Thanks
  • From: "nacelp" <nacelp@bright.net>
• Re: ECM in an Olds Bravada?
  • From: "nacelp" <nacelp@bright.net>
• Re: Hardware/software
  • From: "Programmer" <nwester@eidnet.org>
• Re: Digital Speedometer
  • From: bcurrey@escape.com
• Re: Emissions and Chip Burning
  • From: "Peter Fenske" <Peter_Fenske@bcit.ca>
• oscilloscope for windows
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Memcal ESC Filter Numbers
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Old code 41
  • From: "C and T" <candt@techcom.net>
• 1227730 ECM on Ebay
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: Memcal ESC Filter Numbers
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: ECM in an Olds Bravada?
  • From: thergen@svn.net
• Re: P4 processor info
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• RE: 1228331 ECU Processor (P4 processor info)
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: Programming Voltage
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Calpak
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 1228331 ECU Processor (P4 processor info)
  • From: Ludis Langens <ludis@cruzers.com>
• Re: P4 processor info
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Quad 4 W41 binary file
  • From: Will Remaklus <remaklus@attglobal.net>
• Re: ASBX code is AMXY
  • From: Pat Ford <pford@qnx.com>
• Re: ebay TPI system
  • From: "Dave & Irina Eicher" <sailors@mwci.net>
• Re: ASBX code is AMXY
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: ASBX code is AMXY
  • From: Pat Ford <pford@qnx.com>
• Re: ECM in an Olds Bravada?
  • From: Matt S Bower <m.s.bower@cummins.com>
• Re: CarBytes v3 is to be released as EFIlive v3
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: TBI to TPI Conversion
  • From: Todd Israels <israels@mnsi.net>
• Re: 2.8 maf to ad conversion.
  • From: Steve Ciciora <ciciora@edison.chisp.net>
• CarBytes v3 is to be released as EFIlive v3
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Re: CarBytes v3 is to be released as EFIlive v3
  • From: Barry Tisdale <btisdale@cybersol.com>
• free schematic software
  • From: steve ravet <sravet@arm.com>
• Re: free schematic software
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: free schematic software
  • From: David Cooley <n5xmt@bellsouth.net>
• old code 41
  • From: "Gerald Pelnar" <wd0fyf@mpks.net>
• Re: old code 41
  • From: Chipsbyal@aol.com
• Carprom vs. Promedit
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Newbie
  • From: DarthOlds@aol.com
• Re: Carprom vs. Promedit
  • From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
• Re: 1228331 ECU Processor (P4 processor info)
  • From: Ludis Langens <ludis@cruzers.com>
• Re: What is the dynamic range of the AFR sweeps across stoichiometric?
  • From: Ludis Langens <ludis@cruzers.com>
• Re: ASBX code is AMXY - memory emulator
  • From: "mike mager" <mikemager@hotmail.com>
• Re: free schematic software
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: My turn for a conversion
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Memory Emulator (was ASBX code is AMXY)
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Turbo_P4_Doc.pdf & BKZO
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• AED Vehicle Controller Interface and software for sale - calibration equipment
  • From: "Jason R. Haines" <jhaines@lingenfelter.com>
• Re: Emulator
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Carprom vs. Promedit
  • From: "Programmer" <nwester@eidnet.org>
• PID B/L INT
  • From: "nacelp" <nacelp@bright.net>
• RE: Updated '747 ignition info
  • From: "nacelp" <nacelp@bright.net>
• *ECU FILE FOR 165
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: *ECU FILE FOR 165
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Re: *ECU FILE FOR 165
  • From: "nacelp" <nacelp@bright.net>
• Re: *ECU FILE FOR 165
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: Turbo_P4_Doc.pdf & BKZO
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Turbo_P4_Doc.pdf & BKZO
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Turbo_P4_Doc.pdf & BKZO
  • From: Ludis Langens <ludis@cruzers.com>
• Re: PID B/L INT
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Turbo_P4_Doc.pdf & BKZO
  • From: ECMnut@aol.com
• Re: *ECU FILE FOR 165
  • From: "nacelp" <nacelp@bright.net>
• Re: Turbo_P4_Doc.pdf & BKZO
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• AZTY BCC
  • From: rr <RRauscher@nni.com>
• Updated '747 ignition info
  • From: rr <RRauscher@nni.com>
• Re: Turbo_P4_Doc.pdf & BKZO
  • From: ECMnut@aol.com
• Re: Turbo_P4_Doc.pdf & BKZO
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Turbo_P4_Doc.pdf & BKZO
  • From: Shannen Durphey <shannen@grolen.com>
• ECU file for '870???? Anyone? Bueller?
  • From: "Craig Marcho" <marcho@flash.net>
• Re: Turbo_P4_Doc.pdf & BKZO
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Memory Emulator (was ASBX code is AMXY)
  • From: "mike mager" <mikemager@hotmail.com>
• Re: *ECU FILE FOR 165
  • From: "Programmer" <nwester@eidnet.org>
• Low Impedance Injector driver info
  • From: Keith <kgil1@tampabay.rr.com>
• Re: Updated '747 ignition info
  • From: "mike mager" <mikemager@hotmail.com>
• Re: Low Impedance Injector driver info
  • From: JTesta1966@aol.com
• Re: Low Impedance Injector driver info
  • From: Shannen Durphey <shannen@grolen.com>
• (no subject)
  • From: gloz@techcomm.net
• Re: Low Impedance Injector driver info
  • From: "nacelp" <nacelp@bright.net>
• Re: Low Impedance Injector driver info
  • From: "nacelp" <nacelp@bright.net>
• Re: *ECU FILE FOR 165
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• Re: *ECU FILE FOR 165
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: Turbo_P4_Doc.pdf & BKZO
  • From: ECMnut@aol.com
• Re: Turbo_P4_Doc.pdf & BKZO
  • From: ECMnut@aol.com
• Re: Low Impedance Injector driver info
  • From: ECMnut@aol.com
• PID control stategy book?
  • From: "Jason R. Haines" <jhaines@lingenfelter.com>
• Re: Turbo_P4_Doc.pdf
  • From: "Ron Gregory" <ron_gregory@adc.com>
• Re: Low Impedance Injector driver info
  • From: "Ron Gregory" <ron_gregory@adc.com>
• Re: Memory Emulator (was ASBX code is AMXY)
  • From: "Swayze" <kswayze@bellsouth.net>
• Eprom???
  • From: "Jeff Flanary" <jefff@mounet.com>
• Re: Eprom???
  • From: steve ravet <sravet@arm.com>
• Re: Low Impedance Injector driver info
  • From: "nacelp" <nacelp@bright.net>
• Re: Eprom???
  • From: JTesta1966@aol.com
• Re: Memory Emulator (was ASBX code is AMXY)
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Memory Emulator (was ASBX code is AMXY)
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: PID control stategy book?
  • From: Regnirps@aol.com
• Re: Memory Emulator (was ASBX code is AMXY)
  • From: "nacelp" <nacelp@bright.net>
• Re: Memory Emulator (was ASBX code is AMXY)
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Low Impedance Injector driver info
  • From: Keith <kgil1@tampabay.rr.com>
• PCM connectors
  • From: "nacelp" <nacelp@bright.net>
• Re: Eprom???
  • From: "Jeff Flanary" <jefff@mounet.com>
• B/L INT Numbers
  • From: "nacelp" <nacelp@bright.net>
• Re: PCM connectors
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: B/L INT Numbers
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: PCM connectors
  • From: Chipsbyal@aol.com
• Re: Memory Emulator (was ASBX code is AMXY)
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• RE: B/L INT Numbers
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• EFI POWWOW
  • From: "nacelp" <nacelp@bright.net>
• Re: PCM connectors
  • From: "nacelp" <nacelp@bright.net>
• Re: Eprom???
  • From: JTesta1966@aol.com
• RE: B/L INT Numbers
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: PCM connectors
  • From: Jennifer Green & Scott Peitzsch <jlg-sep@mediaone.net>
• 165 to 730 conversion in F-body
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: 165 to 730 conversion in F-body
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: Eprom???
  • From: "Jeff Flanary" <jefff@mounet.com>
• Re: PCM connectors
  • From: "nacelp" <nacelp@bright.net>
• Re: PCM connectors
  • From: "Jason R. Haines" <jhaines@lingenfelter.com>
• Re: GMECM Digest V2 #166
  • From: Dig <turbodig@yahoo.com>
• Re: PCM connectors
  • From: "nacelp" <nacelp@bright.net>
• RE: EFI POWWOW
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Re: PCM connectors
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: EFI POWWOW
  • From: "nacelp" <nacelp@bright.net>
• Re: B/L INT Numbers
  • From: JTesta1966@aol.com
• RE: EFI POWWOW
  • From: Frederic Breitwieser <Frederic@xephic.dynip.com>
• Re: B/L INT Numbers
  • From: Roger Heflin <rah@horizon.hit.net>
• 101
  • From: "Geoff Richards" <kranky@one.net.au>
• Re: 101
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Did I just learn something? - 8051
  • From: "mike mager" <mikemager@hotmail.com>
• Re: Turbo_P4_Doc.pdf & BKZO
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Eprom???
  • From: Shannen Durphey <shannen@grolen.com>
• LeMans EFI wiring diagram for 1227303?
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: PCM connectors
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 6811 Disassembler (was Memory Emulator, which was ASBX code is AMXY)
  • From: Donald Whisnant <dewhisna@ix.netcom.com>
• Re: Did I just learn something? - 8051
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: Updated '747 ignition info
  • From: rr <RRauscher@nni.com>
• Re: 6811 Disassembler
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: B/L INT Numbers
  • From: rr <RRauscher@nni.com>
• RE: Low Impedance Injector driver info
  • From: "the Fredericks" <fredericksk@worldnet.att.net>
• Vortec TPI Manifold on the way
  • From: "Bob Groger" <monitorguy@mail.eagleserver.com>
• Australian ECM Wiring Diagrams
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Conversion program
  • From: "Geoff Richards" <kranky@one.net.au>
• Re: Conversion program
  • From: "mike mager" <mikemager@hotmail.com>
• Burning
  • From: "black maj" <blackmin@hotmail.com>
• RE: Conversion program
  • From: "Geoff Richards" <kranky@one.net.au>
• Re: Vortec TPI Manifold on the way
  • From: "Jason R. Haines" <jhaines@lingenfelter.com>
• Re: 6811 Disassembler
  • From: Donald Whisnant <dewhisna@ix.netcom.com>
• Re: Burning
  • From: "nacelp" <nacelp@bright.net>
• MC68332 disassembler ?
  • From: Daniel Henriksson <rotax@ludd.luth.se>
• EFI - Does it really work like that ?
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Sensitivity of GM Knock Sensors
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: EFI - Does it really work like that ?
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: EFI - Does it really work like that ?
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Burning
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Sensitivity of GM Knock Sensors
  • From: "nacelp" <nacelp@bright.net>
• MAF to speed density?
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: MAF to speed density?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Quad 4 W41 binary file
  • From: Shannen Durphey <shannen@grolen.com>
• Sensitivity of GM Knock Sensors
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: MAF to speed density?
  • From: PCMdoc <PCMdoc@surfree.com>
• Re: Sensitivity of GM Knock Sensors
  • From: "nacelp" <nacelp@bright.net>
• Re: PCM connectors
  • From: PCMdoc <PCMdoc@surfree.com>
• Re: PCM connectors
  • From: PCMdoc <PCMdoc@surfree.com>
• It's alive!
  • From: rr <RRauscher@nni.com>
• adjusting fuel for gearing...
  • From: "Shane Buss" <shaneb@ev1.net>
• Re: adjusting fuel for gearing...
  • From: David Cooley <n5xmt@bellsouth.net>
• TBI Injector Rates
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: MC68332 disassembler ?
  • From: Donald Whisnant <dewhisna@ix.netcom.com>
• Re: TBI Injector Rates
  • From: "nacelp" <nacelp@bright.net>
• GM EFI parts for sale
  • From: "tim ganger" <tganger@compuserve.com>
• Sensitivity of GM Knock Sensors
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: It's alive!
  • From: "mike mager" <mikemager@hotmail.com>
• Disassemblers - Generate compiler code-x's source code?
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• generic question
  • From: Ken & Rae Bauman <303print@northrim.net>
• Re: GM EFI parts for sale
  • From: "nacelp" <nacelp@bright.net>
• RE: Disassemblers - Generate compiler code-x's source code?
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: Disassemblers - Generate compiler code-x's source code?
  • From: bcurrey@pop.ce.mediaone.net
• RE: Disassemblers - Generate compiler code-x's source code?
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: TBI Injector Rates
  • From: rr <RRauscher@nni.com>
• Re: It's alive!
  • From: "nacelp" <nacelp@bright.net>
• Re: It's alive!
  • From: rr <RRauscher@nni.com>
• Re: It's alive!
  • From: "mike mager" <mikemager@hotmail.com>
• Re: It's alive!
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Disassemblers - Generate compiler code-x's source code?
  • From: "nacelp" <nacelp@bright.net>
• Trouble with Pocket Programmer
  • From: "Jeff Kopp" <jkopp@direcpc.com>
• Re: Trouble with Pocket Programmer
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Trouble with Pocket Programmer
  • From: Roger Heflin <rah@horizon.hit.net>
• Where's Winbin?
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• ZIP Cleaning
  • From: "nacelp" <nacelp@bright.net>
• Re: Trouble with Pocket Programmer
  • From: Shannen Durphey <shannen@grolen.com>
• RE: 30# injectors
  • From: "Craig Marcho" <marcho@flash.net>
• Re: 30# injectors
  • From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
• Re: 30# injectors
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Trouble with Pocket Programmer
  • From: "Edward J. Malkiewicz" <krazyed@worldnet.att.net>
• Re: ZIP Cleaning
  • From: garwillis@msn.com (Garfield Willis)
• Re: Where's Winbin?
  • From: "Programmer" <nwester@eidnet.org>
• Re: Disassemblers - Generate compiler code-x's source code?
  • From: Donald Whisnant <dewhisna@ix.netcom.com>
• Re: generic question
  • From: "mike mager" <mikemager@hotmail.com>
• VSS
  • From: "black maj" <blackmin@hotmail.com>
• BCC's for Australian apps
  • From: "Matt Tomlins" <mattpw@ozemail.com.au>
• Re: Trouble with Pocket Programmer
  • From: "Jeff Kopp" <jkopp@direcpc.com>
• Re: Trouble with Pocket Programmer
  • From: DC Smith <morepoweral@tetranet.net>
• Re: ZIP Cleaning
  • From: Frank F Parker <fparker@umich.edu>
• GM EFI parts
  • From: "J. T. Spilman" <jtstexas@home.com>
• Re: ZIP Cleaning
  • From: "Dave & Irina Eicher" <sailors@mwci.net>
• Re: BCC's for Australian apps
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Trouble with Pocket Programmer
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Disassemblers - Generate compiler code-x's source code?
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: generic question
  • From: David Cooley <n5xmt@bellsouth.net>
• RE: Where's Winbin?
  • From: Eric Aos <EOA@spartek.com>
• FYI - More cam-less engine news
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Fuel pressure question, again
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: GM EFI parts
  • From: "tim ganger" <tganger@compuserve.com>
• Re: TBI Injector Rates
  • From: Ward <WSpoonemore@excite.com>
• intersting link
  • From: mswayze@truswood.com (Mike Swayze)
• Re: GM EFI parts
  • From: "nacelp" <nacelp@bright.net>
• Re: intersting link
  • From: Squash <realsquash@yahoo.com>
• Re: intersting link
  • From: Daniel Ciobota <dciobota@hiwaay.net>
• RE: Where's Winbin?
  • From: "mike mager" <mikemager@hotmail.com>
• Temp sensor
  • From: "nacelp" <nacelp@bright.net>
• unsubscribing
  • From: "mike mager" <mikemager@hotmail.com>
• ALDL
  • From: "Jeff Flanary" <jefff@mounet.com>
• RE: Temp sensor
  • From: Carl Summers <InTech@writeme.com>
• Re: ALDL
  • From: "nacelp" <nacelp@bright.net>
• Re: ALDL
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: 30# injectors
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Temp sensor
  • From: Frank F Parker <fparker@umich.edu>
• Re: ZIP Cleaning
  • From: "Programmer" <nwester@eidnet.org>
• Re: It's alive!
  • From: rr <RRauscher@nni.com>
• Re: It's alive!
  • From: rr <RRauscher@nni.com>
• Re: It's alive!
  • From: rr <RRauscher@nni.com>
• RE: Temp sensor
  • From: "Michael Adams" <michaeladams1@compuserve.com>
• Re: Temp sensor
  • From: Chipsbyal@aol.com
• Re: Temp sensor
  • From: "nacelp" <nacelp@bright.net>
• Re: Temp sensor
  • From: "nacelp" <nacelp@bright.net>
• Re: Temp sensor
  • From: Shannen Durphey <shannen@grolen.com>
• one step back = one step up...
  • From: Shannen Durphey <shannen@grolen.com>
• RE: one step back = one step up...
  • From: "the Fredericks" <fredericksk@worldnet.att.net>
• Re: vortec distributor pn 1104051
  • From: Shannen Durphey <shannen@grolen.com>
• Re: vortec distributor pn 1104051
  • From: "nacelp" <nacelp@bright.net>
• Re: vortec distributor pn 1104051
  • From: Shannen Durphey <shannen@grolen.com>
• Re: vortec distributor pn 1104051
  • From: "nacelp" <nacelp@bright.net>
• Re: Temp sensor
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: MAF to speed density?
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: MAF to speed density?
  • From: Ken Kelly <kenkelly@lucent.com>
• build your own MAF???
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: build your own MAF???
  • From: Ken Kelly <kenkelly@lucent.com>
• Re: Temp sensor
  • From: "nacelp" <nacelp@bright.net>
• BLM cell boarder values
  • From: "Dave Zug." <dzug@delanet.com>
• My Blm Question
  • From: "Dave Zug." <dzug@delanet.com>
• RE: BLM cell boarder values
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: BLM cell boarder values
  • From: "Dave Zug." <dzug@delanet.com>
• Re: My Blm Question
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Temp sensor
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Test please delete
  • From: "turbo31 v6" <turbo31v6@hotmail.com>
• Re: vortec distributor pn 1104051
  • From: "nacelp" <nacelp@bright.net>
• Turbo Tuning
  • From: "turbo31 v6" <turbo31v6@hotmail.com>
• Re: Turbo Tuning
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Turbo Tuning
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• RE: Turbo Tuning
  • From: "the Fredericks" <fredericksk@worldnet.att.net>
• Re: Turbo Tuning
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Turbo Tuning
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Turbo Tuning/VE
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: one step back = one step up...
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Turbo Tuning/VE
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Turbo Tuning
  • From: David Cooley <n5xmt@bellsouth.net>
• VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
  • From: olbap <olbap@mail.mia.bellsouth.net>
• turbo tuning posts
  • From: "NickG" <nikog@mediaone.net>
• Re: Turbo Tuning/VE
  • From: "turbo31 v6" <turbo31v6@hotmail.com>
• RE: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
  • From: Carl Summers <InTech@writeme.com>
• RE: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
  • From: Carl Summers <InTech@writeme.com>
• RE: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
  • From: olbap <olbap@mail.mia.bellsouth.net>
• RE: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: turbo tuning posts
  • From: Ludis Langens <ludis@cruzers.com>
• Re: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
  • From: Ludis Langens <ludis@cruzers.com>
• Re: BLM cell boarder values
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Turbo Tuning
  • From: Scot Sealander <Sealand@clarityconnect.com>
• 16196911
  • From: "Jeff Flanary" <jefff@mounet.com>
• Re: BLM cell boarder values
  • From: "Dave Zug." <dzug@delanet.com>
• Re: 16196911
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Turbo Tuning
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: BLM cell boarder values
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• TCC question in '165
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: BLM cell boarder values
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: vortec distributor pn 1104051
  • From: "nacelp" <nacelp@bright.net>
• Wide Range O2, Throttle by wire, Cat Conv, and EGR
  • From: "Rich Vandervoort" <richvandervoort@hotmail.com>
• Re: TCC question in '165
  • From: "nacelp" <nacelp@bright.net>
• RE: BLM cell boarder values
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• Re: BLM cell boarder values
  • From: "Dave Zug." <dzug@delanet.com>
• Re: TCC question in '165
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• RE: BLM cell boarder values
  • From: Roger Heflin <rah@horizon.hit.net>
• compiling/programing
  • From: "Mike Rolica" <tpiguy@freewwweb.com>
• Notable stuff
  • From: "nacelp" <nacelp@bright.net>
• Re: Turbo Tuning author
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Temp sensor
  • From: "nacelp" <nacelp@bright.net>
• Re: BLM cell boarder values
  • From: "turbo31 v6" <turbo31v6@hotmail.com>
• Re: BLM cell boarder values
  • From: "nacelp" <nacelp@bright.net>
• POW WOW tenitive date
  • From: "nacelp" <nacelp@bright.net>
• RE: BLM cell boarder values
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: TCC question in '165
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: BLM cell boarder values
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: BLM cell boarder values
  • From: "Dave Zug." <dzug@delanet.com>
• Re: Turbo Tuning author
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: BLM cell boarder values
  • From: "Dave Zug." <dzug@delanet.com>
• Re: Temp sensor
  • From: Mike Dillon <mdill@lsil.com>
• Re: TCC question in '165
  • From: "nacelp" <nacelp@bright.net>
• Re: BLM cell boarder values
  • From: "nacelp" <nacelp@bright.net>
• Re: BLM cell boarder values
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: BLM cell boarder values
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Temp sensor
  • From: "nacelp" <nacelp@bright.net>
• Re: BLM cell boarder values
  • From: "nacelp" <nacelp@bright.net>
• Re: Temp sensor
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: Temp sensor
  • From: "nacelp" <nacelp@bright.net>
• Timing computations
  • From: "nacelp" <nacelp@bright.net>
• RE: Temp sensor
  • From: "Rudi Machilek" <Rudi@vnet.net>
• Re: Wide Range O2, Throttle by wire, Cat Conv, and EGR
  • From: Shannen Durphey <shannen@grolen.com>
• AXDH0179?
  • From: "TK" <terryk@foothill.net>
• Re: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: BLM cell boarder values
  • From: Shannen Durphey <shannen@grolen.com>
• Re: AXDH0179?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: AXDH0179?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: AXDH0179?
  • From: "TK" <terryk@foothill.net>
• Re: Turbo Tuning
  • From: "TK" <terryk@foothill.net>
• Re: AXDH0179?
  • From: "nacelp" <nacelp@bright.net>
• Re: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: AXDH0179?
  • From: "TK" <terryk@foothill.net>
• Re: AXDH0179?
  • From: ECMnut@aol.com
• MAF Mess
  • From: Bill Shaw <bshaw@connix.com>
• Re: TCC question in '165
  • From: "Programmer" <nwester@eidnet.org>
• Re: MAF Mess
  • From: "Programmer" <nwester@eidnet.org>
• RE: BLM cell boarder values
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• FILTMPH
  • From: Dig <turbodig@yahoo.com>
• source for junkyard pulls
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: AXDH0179?
  • From: "TK" <terryk@foothill.net>
• Re: Notable stuff
  • From: "Swayze" <kswayze@bellsouth.net>
• Test bench
  • From: "Geoff Richards" <kranky@one.net.au>
• Re: Test bench
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Notable stuff
  • From: "nacelp" <nacelp@bright.net>
• Re: Notable stuff
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Test bench
  • From: Shannen Durphey <shannen@grolen.com>
• ecm_testbench
  • From: "nacelp" <nacelp@bright.net>
• Re: MAF Mess
  • From: Rex Weatherford <rex.weatherford@mentisys.com>
• Re: compiling/programing
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• Re: FILTMPH
  • From: JTesta1966@aol.com
• Re: MAF Mess
  • From: JTesta1966@aol.com
• Re: Temp sensor
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• RE: TCC question in '165
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Temp sensor
  • From: "Swayze" <kswayze@bellsouth.net>
• 2532 EPROM
  • From: "Jeff Flanary" <jefff@mounet.com>
• RE: Notable stuff
  • From: "Mike Rolica" <97005620@lambton.on.ca>
• Re: 2532 EPROM
  • From: "Programmer" <nwester@eidnet.org>
• Re: BLM cell boarder values
  • From: "Dave Zug." <dzug@delanet.com>
• Asynch vs Synch Injection
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Asynch vs Synch Injection
  • From: "nacelp" <nacelp@bright.net>
• 2532
  • From: "Jeff Flanary" <jefff@mounet.com>
• Re: 2532
  • From: "Programmer" <nwester@eidnet.org>
• Re: 2532
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: Asynch vs Synch Injection
  • From: "Dave Zug." <dzug@delanet.com>
• Re: Asynch vs Synch Injection
  • From: steve ravet <sravet@arm.com>
• Re: Asynch vs Synch Injection
  • From: Ken Kelly <kenkelly@lucent.com>
• 2532
  • From: "Jeff Flanary" <jefff@mounet.com>
• Re: Asynch vs Synch Injection
  • From: "Jeffrey Scott" <jws6367@mailcity.com>
• Re: Asynch vs Synch Injection
  • From: "Jim Sloan" <leroy@sunflower.com>
• Re: Asynch vs Synch Injection
  • From: ECMnut@aol.com
• Re: Asynch vs Synch Injection
  • From: "Dave Zug." <dzug@delanet.com>
• Re: Asynch vs Synch Injection
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: TCC question in '165
  • From: Shannen Durphey <shannen@grolen.com>
• Re: BLM cell boarder values
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Asynch vs Synch Injection
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Asynch vs Synch Injection
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Asynch vs Synch Injection
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Asynch vs Synch Injection
  • From: "nacelp" <nacelp@bright.net>
• Re: Asynch vs Synch Injection
  • From: "nacelp" <nacelp@bright.net>
• Re: Asynch vs Synch Injection
  • From: "nacelp" <nacelp@bright.net>
• Re: VSS
  • From: "black maj" <blackmin@hotmail.com>
• Re: Asynch vs Synch Injection
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: VSS
  • From: "nacelp" <nacelp@bright.net>
• Re: VSS
  • From: "black maj" <blackmin@hotmail.com>
• Sorry no efi, National Organ, and tissue awaremess week
  • From: "nacelp" <nacelp@bright.net>
• Re: Asynch vs Synch Injection
  • From: ECMnut@aol.com
• Re: VSS
  • From: "nacelp" <nacelp@bright.net>
• RE: Sorry no efi, National Organ, and tissue awaremess week
  • From: Carl Summers <InTech@writeme.com>
• Re: VSS
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Sorry no efi, National Organ, and tissue awaremess week
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Sorry no efi, National Organ, and tissue awaremess week
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: Sorry no efi, National Organ, and tissue awaremess week
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: BLM cell boarder values: ECM GUY PAGE
  • From: "Dave Zug." <dzug@delanet.com>
• Re: VSS
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: Sorry no efi, National Organ, and tissue awaremess week
  • From: "Dave Zug." <dzug@delanet.com>
• Re: VSS
  • From: "black maj" <blackmin@hotmail.com>
• Re: Notable stuff
  • From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
• Re: Notable stuff
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Notable stuff
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: VSS
  • From: "nacelp" <nacelp@bright.net>
• Turbo tuning reviesed/injectors
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Turbo tuning reviesed/injectors
  • From: ECMnut@aol.com
• Re: Sorry no efi, National Organ, and tissue awaremess week
  • From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
• Re: Turbo tuning reviesed/injectors
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: VSS
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Meter
  • From: "nacelp" <nacelp@bright.net>
• Re: BLM cell boarder values: ECM GUY PAGE
  • From: Shannen Durphey <shannen@grolen.com>
• Source of PCM crimp "Micro-Pack" connectors
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: FILTMPH
  • From: Ludis Langens <ludis@cruzers.com>
• Odp: Source of PCM crimp "Micro-Pack" connectors
  • From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
• Favorite things about these lists...
  • From: "Steve Cauffiel" <cauffiel@erols.com>
• ECM's Exchange? Can a 1227303 replace 1227165?
  • From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
• Re: ECM's Exchange? Can a 1227303 replace 1227165?
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: ECM's Exchange? Can a 1227303 replace 1227165?
  • From: Bob Valentine <bob@tecmark.com>
• LeMans BIN and/or wiring diagram (for 1227303)
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Sorry no efi, National Organ, and tissue awaremess week
  • From: Doug Dayson <djdayson@ix.netcom.com>
• Re: Source of PCM crimp "Micro-Pack" connectors
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Favorite things about these lists...
  • From: Mike from West Australia <erazmus@wantree.com.au>
• Re: VSS
  • From: "black maj" <blackmin@hotmail.com>
• Re: Source of PCM crimp "Micro-Pack" connectors
  • From: ron harris <harris1@execpc.com>
• Re: Source of PCM crimp "Micro-Pack" connectors
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Source of PCM crimp "Micro-Pack" connectors
  • From: "nacelp" <nacelp@bright.net>
• Re: ECM's Exchange? Can a 1227303 replace 1227165?
  • From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
• BLM numbers
  • From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
• Re: ECM's Exchange? Can a 1227303 replace 1227165?
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Odp: Source of PCM crimp "Micro-Pack" connectors
  • From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
• Re: Source of PCM crimp "Micro-Pack" connectors
  • From: JTesta1966@aol.com
• Newbie needs advice
  • From: akallotte@juno.com
• '747 IAC stuff
  • From: rr <RRauscher@nni.com>
• Re: '747 IAC stuff
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Newbie needs advice
  • From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
• Re: Newbie needs advice
  • From: Kevin Crain <kevin@warpten.com>
• MAF sensor
  • From: cwagner@info2000.net
• Re: Source of PCM crimp "Micro-Pack" connectors
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: '747 IAC stuff
  • From: rr <RRauscher@nni.com>
• BUA in source form - was Re: '747 IAC stuff
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: BLM numbers
  • From: "Dave Zug" <dzug@delanet.com>
• 1227xxx --> 165, 277, 303, 752, 808, etc...
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: 1227xxx --> 165, 277, 303, 752, 808, etc...
  • From: "Swayze" <kswayze@bellsouth.net>
• 1227165 solder side scan of PCB?
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: BLM numbers
  • From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
• Re: ALDL connector
  • From: "Swayze" <kswayze@bellsouth.net>
• ALDL connector
  • From: "Jeff Flanary" <jefff@mounet.com>
• Re: ALDL connector
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: ALDL connector
  • From: "Craig Marcho" <test@airmail.net>
• [no subject]
  • From: Pat Ford <pford@qnx.com>
• Fw: Asynch/asynch
  • From: "nacelp" <nacelp@bright.net>
• '7429, first crack at it!
  • From: Ernst denBroeder <ernst@employees.org>
• Re: Asynch/asynch
  • From: "Swayze" <kswayze@bellsouth.net>
• Free Data Acquisition Starter Kit
  • From: Steven Ciciora <ciciora@Ciciora.com>
• Re: ALDL connector
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Odp: Source of PCM crimp "Micro-Pack" connectors
  • From: Bja1078@aol.com
• Re: '7429, first crack at it!
  • From: "Ernst denBroeder" <ernst@employees.org>
• The Turbo Shop URL
  • From: "nacelp" <nacelp@bright.net>
• Re: The Turbo Shop URL
  • From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
• Re: Fw: Asynch/asynch
  • From: thergen@svn.net
• Re: ALDL connector
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Illegal Operations
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: Illegal Operations
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: GMECM Digest V2 #183
  • From: "Alex Bratovic" <alexbratovic@bratspeed.com>
• RE: Illegal Operations
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: Illegal Operations
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: '7429, first crack at it!
  • From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
• RE: Illegal operation
  • From: Dave Hempstead <dave_hempstead@agilent.com>
• Re: '7429, first crack at it!
  • From: Ernst denBroeder <ernst@employees.org>
• Help!
  • From: Ernst denBroeder <ernst@employees.org>
• Crossfire Injection Question
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: Illegal Operations
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Odp: Odp: Source of PCM crimp "Micro-Pack" connectors
  • From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
• 87 to 89 ECM
  • From: akallotte@juno.com
• Re: 87 to 89 ECM
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Re: Source of PCM crimp "Micro-Pack" connectors
  • From: steve ravet <sravet@arm.com>
• Re: 87 to 89 ECM
  • From: "nacelp" <nacelp@bright.net>
• Re: 87 to 89 ECM
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Crossfire Injection Question
  • From: "nacelp" <nacelp@bright.net>
• Re: ALDL connector
  • From: steve ravet <sravet@arm.com>
• Re: 87 to 89 ECM
  • From: "nacelp" <nacelp@bright.net>
• 7749 question
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: 87 to 89 ECM
  • From: "Ernst denBroeder" <ernst@employees.org>
• Re: 7749 question
  • From: "Jim Sloan" <leroy@sunflower.com>
• Re: 87 to 89 ECM
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 7749 question
  • From: "Green" <green@dsl.telocity.com>
• Re: BUA in source form - was Re: '747 IAC stuff
  • From: rr <RRauscher@nni.com>
• Re: 87 to 89 ECM
  • From: rr <RRauscher@nni.com>
• Re: cal pak ID
  • From: "nacelp" <nacelp@bright.net>
• Re: cal pak ID
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 87 to 89 ECM
  • From: "Ernst denBroeder" <ernst@employees.org>
• Re: 87 to 89 ECM
  • From: "Ernst denBroeder" <ernst@employees.org>
• Re: 7749 question
  • From: "TK" <terryk@foothill.net>
• Re: cal pak ID
  • From: Shannen Durphey <shannen@grolen.com>
• Re: GMECM Digest V2 #181
  • From: Dig <turbodig@yahoo.com>
• Re: Howell TPI book on Ebay
  • From: "nacelp" <nacelp@bright.net>
• cal pak ID
  • From: "Dave Zug" <dzug@delanet.com>
• Re: cal pak ID
  • From: "nacelp" <nacelp@bright.net>
• Re: cal pak ID
  • From: "Dave Zug" <dzug@delanet.com>
• Howell TPI book on Ebay
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Crossfire Injection Question
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: GMECM Digest V2 #181
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 1227165 solder side scan of PCB?
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• TPI 327 Timing
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: Crossfire Injection Question
  • From: "nacelp" <nacelp@bright.net>
• Re: cal pak ID
  • From: JTesta1966@aol.com
• book
  • From: "Jeff Flanary" <jefff@mounet.com>
• Re: Help!
  • From: "nacelp" <nacelp@bright.net>
• Re: book
  • From: JTesta1966@aol.com
• Re: TPI 327 Timing
  • From: "nacelp" <nacelp@bright.net>
• Re: book
  • From: "nacelp" <nacelp@bright.net>
• RedHat Linux Mentions Engine Controller in Embedded Systems PR
  • From: Carl Summers <InTech@writeme.com>
• EFIlive v3 is due out this weekend
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Air temps and fuel
  • From: "nacelp" <nacelp@bright.net>
• Re: Odp: Source of PCM crimp "Micro-Pack" connectors
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: Illegal Operations
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: Help!
  • From: rr <RRauscher@nni.com>
• [no subject]
  • From: Carl Summers <InTech@writeme.com>
• Re: '7727 on ebay $6
  • From: ECMnut@aol.com
• Re: Crossfire Injection Question
  • From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
• RE: '7727 on ebay $6
  • From: Carl Summers <InTech@writeme.com>
• '7727 on ebay $6
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Crossfire Injection Question
  • From: "nacelp" <nacelp@bright.net>
• Re: '7727 on ebay $6
  • From: ECMnut@aol.com
• Re: '7727 on ebay $6
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: '7727 on ebay $6
  • From: "Dave Zug." <dzug@delanet.com>
• ECM's
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• RE: ECM's
  • From: Eric Aos <EOA@spartek.com>
• RE: '7727 on ebay $6
  • From: Carl Summers <InTech@writeme.com>
• Re: '7727 on ebay $6
  • From: ECMnut@aol.com
• Re: Air temps and fuel
  • From: Len sabatine <sabatine@epix.net>
• Messages
  • From: romans@starstream.net (Romans, Mark)
• [No EFI] ABS Help Needed
  • From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
• Re: Messages
  • From: Squash <realsquash@yahoo.com>
• Re: Messages
  • From: "nacelp" <nacelp@bright.net>
• Re: [No EFI] ABS Help Needed
  • From: Len sabatine <sabatine@epix.net>
• Re: [No EFI] ABS Help Needed
  • From: "Programmer" <nwester@eidnet.org>
• Re: [No EFI] ABS Help Needed
  • From: "nacelp" <nacelp@bright.net>
• Re: [No EFI] ABS Help Needed
  • From: PHXSYS@aol.com
• GM ECM to run a rotary engine
  • From: "Jason R. Haines" <jhaines@lingenfelter.com>
• Re: GM ECM to run a rotary engine
  • From: David Cooley <n5xmt@bellsouth.net>
• Got my Brainmaster today....
  • From: "C and T" <candt@techcom.net>
• Re: [No EFI] ABS Help Needed
  • From: "Programmer" <nwester@eidnet.org>
• Re: [No EFI] ABS Help Needed
  • From: "Programmer" <nwester@eidnet.org>
• DirectScan "RAM Scan Tool"
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Messages
  • From: romans@starstream.net (Romans, Mark)
• Re: [No EFI] ABS Help Needed
  • From: Shannen Durphey <shannen@grolen.com>
• Re: [No EFI] ABS Help Needed
  • From: Shannen Durphey <shannen@grolen.com>
• Re: DirectScan "RAM Scan Tool"
  • From: DC Smith <morepoweral@tetranet.net>
• Another GM EFI link
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• GM ECM to run a rotary engine
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: [No EFI] ABS Help Needed
  • From: Len sabatine <sabatine@epix.net>
• CATS Disassembler comments
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• EFIlive v3 evaluation version is available at...
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• ECM #
  • From: "nacelp" <nacelp@bright.net>
• Big part sale
  • From: "nacelp" <nacelp@bright.net>
• Re: ECM #
  • From: rr <RRauscher@nni.com>
• Re: ECM #
  • From: ECMnut@aol.com
• Re: ECM #
  • From: rr <RRauscher@nni.com>
• Stock TPI vs Super Ram plenum volume Question
  • From: romans@starstream.net (Romans, Mark)
• Re: Stock TPI vs Super Ram plenum volume Question
  • From: "nacelp" <nacelp@bright.net>
• Re: Stock TPI vs Super Ram plenum volume Question
  • From: romans@starstream.net (Romans, Mark)
• Re: CATS Disassembler comments
  • From: Donald Whisnant <dewhisna@ix.netcom.com>
• Re: ECM #
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Need help: power programming eprom
  • From: "93 Formula" <red93formula@hotmail.com>
• Re: Need help: power programming eprom
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Need help: power programming eprom
  • From: "nacelp" <nacelp@bright.net>
• Re: ECM #
  • From: Shannen Durphey <shannen@grolen.com>
• Re: ECM #
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Need help: power programming eprom
  • From: Shannen Durphey <shannen@grolen.com>
• Re: [No EFI] ABS Help Needed
  • From: Mike Turner <miketurner@ieee.org>
• Re: Need help: power programming eprom
  • From: Bob Valentine <bob@tecmark.com>
• Re: Need help: power programming eprom
  • From: JTesta1966@aol.com
• Re: ECM #
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• Re: Need help: Thanks & Other Software
  • From: "93 Formula" <red93formula@hotmail.com>
• Re: ECM #
  • From: "nacelp" <nacelp@bright.net>
• Re: ECM #
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• '90 Calpaks and PROMs
  • From: "TRAX" <trax@frederickmd.com>
• Re: 2 bar MAP on a ZR1?
  • From: Tyler Townsley <ttownsley@sprynet.com>
• Re: '90 Calpaks and PROMs
  • From: Roger Heflin <rah@horizon.hit.net>
• leaky injectors??
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Running a 305 with '747
  • From: "Kurek, Larry" <lkurek@anl.gov>
• Re: leaky injectors??
  • From: "nacelp" <nacelp@bright.net>
• Re: ECM #
  • From: "nacelp" <nacelp@bright.net>
• Re: '90 Calpaks and PROMs
  • From: eclark@hoser.com
• ESC filters and Re: '90 Calpaks and PROMs
  • From: Marc Randolph <mrand@pobox.com>
• Re: ECM #
  • From: "Programmer" <nwester@eidnet.org>
• Re: leaky injectors??
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: '90 Calpaks and PROMs
  • From: "TRAX" <trax@frederickmd.com>
• Home Dyno
  • From: "Craig Marcho" <test@airmail.net>
• Re: 400 sbc in place of 350, 747 ecm
  • From: Hotrodderzzz@aol.com
• Re: Home Dyno
  • From: Doug Dayson <djdayson@home.com>
• Re: '90 Calpaks and PROMs
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Running a 305 with '747
  • From: "Jeff Flanary" <jefff@mounet.com>
• Re: Home Dyno
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: '90 Calpaks and PROMs
  • From: "TRAX" <trax@frederickmd.com>
• Re: '90 Calpaks and PROMs
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• 2 bar MAP on a ZR1?
  • From: "Jason R. Haines" <jhaines@lingenfelter.com>
• Re: '90 Calpaks and PROMs
  • From: Bob Valentine <bob@tecmark.com>
• Re: Home Dyno
  • From: Doug Dayson <djdayson@home.com>
• Re: '90 Calpaks and PROMs
  • From: Roger Heflin <rah@horizon.hit.net>
• RE: Running a 305 with '747
  • From: "Kurek, Larry" <lkurek@anl.gov>
• Re: ESC filters
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: '90 Calpaks and PROMs
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: ECM #
  • From: Shannen Durphey <shannen@grolen.com>
• Re: leaky injectors??
  • From: Shannen Durphey <shannen@grolen.com>
• Re: '90 Calpaks and PROMs
  • From: Shannen Durphey <shannen@grolen.com>
• Re: '90 Calpaks and PROMs
  • From: "TRAX" <trax@frederickmd.com>
• Re: Need help: Thanks & Other Software
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 400 sbc in place of 350, 747 ecm
  • From: "nacelp" <nacelp@bright.net>
• Re: ECM #
  • From: Shannen Durphey <shannen@grolen.com>
• Re: '90 Calpaks and PROMs
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Running a 305 with '747
  • From: Shannen Durphey <shannen@grolen.com>
• Re: leaky injectors??
  • From: "nacelp" <nacelp@bright.net>
• Re: leaky injectors??
  • From: "nacelp" <nacelp@bright.net>
• Re: [No EFI] ABS Help Needed
  • From: Shannen Durphey <shannen@grolen.com>
• Re: [No EFI] ABS Help Needed
  • From: "Rich Vandervoort" <richvandervoort@hotmail.com>
• Re: Home Dyno
  • From: Jason Weir <jweir@worldnet.att.net>
• Re: Running a 305 with '747
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 400 sbc in place of 350, 747 ecm
  • From: Hotrodderzzz@aol.com
• Re: ECM #
  • From: rr <RRauscher@nni.com>
• Re: ECM #
  • From: rr <RRauscher@nni.com>
• Re: GMECM Digest V2 #192
  • From: Dig <turbodig@yahoo.com>
• Re: ECM #
  • From: "TK" <terryk@foothill.net>
• bin uploaded
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• Re: '90 Calpaks and PROMs
  • From: "TK" <terryk@foothill.net>
• Re: bin uploaded
  • From: "nacelp" <nacelp@bright.net>
• somebody tell me what went wrong.
  • From: "Craig Marcho" <marcho@flash.net>
• Re: somebody tell me what went wrong.
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: '90 Calpaks and PROMs
  • From: Keith <kgil1@tampabay.rr.com>
• Erasing EPROMs - was Re: '90 Calpaks and PROMs
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: DirectScan "RAM Scan Tool"
  • From: Christian Hack <christianh@edmi.com.au>
• Re: DirectScan "RAM Scan Tool"
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• RE: 2 bar MAP on a ZR1?
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• RE: [No EFI] ABS Help Needed
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• RE: 2 bar MAP on a ZR1?
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: ECM #
  • From: Shannen Durphey <shannen@grolen.com>
• Re: [No EFI] ABS Help Needed
  • From: Shannen Durphey <shannen@grolen.com>
• Running a 305 with '747
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: Home Dyno
  • From: Rex Weatherford <rex.weatherford@mentisys.com>
• Re: bin uploaded
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• Re: DirectScan "RAM Scan Tool"
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Running a 305 with '747
  • From: "Jeff Flanary" <jefff@mounet.com>
• Cold Start programming and programming for 24lb injectors
  • From: "trax" <trax@frederickmd.com>
• Re: Home Dyno
  • From: John_Calabrese@ENGELHARD.COM
• Re: DirectScan "RAM Scan Tool"
  • From: JTesta1966@aol.com
• Re: somebody tell me what went wrong.
  • From: romans@starstream.net (Romans, Mark)
• Re: somebody tell me what went wrong.
  • From: Ken Kelly <kenkelly@lucent.com>
• RE: Cold Start programming and programming for 24lb injectors
  • From: Carl Summers <InTech@writeme.com>
• Re: 2 bar MAP on a ZR1?
  • From: steve ravet <sravet@arm.com>
• ID 1227747
  • From: Omer N Ozkul <obond@MIT.EDU>
• Re: 2 bar MAP on a ZR1?
  • From: Tyler Townsley <ttownsley@sprynet.com>
• RE: Cold Start programming and programming for 24lb injectors
  • From: "TRAX" <trax@frederickmd.com>
• Re: somebody tell me what went wrong.
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: '90 Calpaks and PROMs
  • From: Kevin Crain <kevin@warpten.com>
• RE: Cold Start programming and programming for 24lb injectors
  • From: Carl Summers <InTech@writeme.com>
• o2 Switching extremes, '165
  • From: "Dave Zug" <dzug@delanet.com>
• Re: ID 1227747
  • From: Shannen Durphey <shannen@grolen.com>
• ACSP Coolant Sensor?
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• RE: Cold Start programming and programming for 24lb injectors
  • From: "trax" <trax@frederickmd.com>
• Re: ID 1227747
  • From: "Programmer" <nwester@eidnet.org>
• RE: Running a 305 with '747
  • From: "Kurek, Larry" <lkurek@anl.gov>
• Re: leaky injectors??
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: '90 Calpaks and PROMs
  • From: Roger Heflin <rah@horizon.hit.net>
• IAT Sensor
  • From: "nacelp" <nacelp@bright.net>
• Dead PB-10
  • From: "nacelp" <nacelp@bright.net>
• Archives seem to be down
  • From: Eric Deslauriers <edeslaur@us.oracle.com>
• Re: Source of PCM crimp "Micro-Pack" connectors
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Running a 305 with '747
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Archives seem to be down
  • From: "Swayze" <kswayze@bellsouth.net>
• blue streak 727
  • From: "Swayze" <kswayze@bellsouth.net>
• Turbo V6 Tuniing continued
  • From: "Jeff M" <tystorm@email.msn.com>
• Spark Plugs....
  • From: Rex Weatherford <rex.weatherford@mentisys.com>
• Re: blue streak 727
  • From: "nacelp" <nacelp@bright.net>
• Re: Turbo V6 Tuniing continued
  • From: JTesta1966@aol.com
• Re: Spark Plugs....
  • From: "nacelp" <nacelp@bright.net>
• Voltage MAF with 1227730
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Turbo V6 Tuniing continued
  • From: "nacelp" <nacelp@bright.net>
• Re: somebody tell me what went wrong.
  • From: frels@rosharon.camco.slb.com (Mike Frels)
• Re: Turbo V6 Tuniing continued
  • From: JTesta1966@aol.com
• Re: Turbo V6 Tuniing continued
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: Spark Plugs....
  • From: John_Calabrese@ENGELHARD.COM
• Re: Spark Plugs....
  • From: Rex Weatherford <rex.weatherford@mentisys.com>
• Re: Turbo V6 Tuniing continued
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Turbo V6 Tuning continued
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Turbo V6 Tuniing continued
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Turbo V6 Tuniing continued/Intronics Emulator update
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Turbo V6 Tuniing continued
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Archives seem to be down
  • From: steve ravet <sravet@arm.com>
• Re: Spark Plugs....
  • From: "Programmer" <nwester@eidnet.org>
• Re: somebody tell me what went wrong.
  • From: Ken Kelly <kenkelly@lucent.com>
• Re: Turbo V6 Tuniing continued
  • From: "nacelp" <nacelp@bright.net>
• Re: Spark Plugs....
  • From: "nacelp" <nacelp@bright.net>
• Re: Turbo V6 Tuniing continued
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: Turbo V6 Tuniing continued
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: Turbo V6 Tuniing continued/Intronics Emulator update
  • From: "nacelp" <nacelp@bright.net>
• Re: Spark Plugs....
  • From: "nacelp" <nacelp@bright.net>
• Re: Turbo V6 Tuniing continued
  • From: JTesta1966@aol.com
• Re: Turbo V6 Tuniing continued
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Virus Warning
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Scanner sw for a '94 LT1 caprice.
  • From: "Rodney Fulk" <elixir@pathwaynet.com>
• Re: Virus Warning
  • From: frels@rosharon.camco.slb.com (Mike Frels)
• 165 ECM question, "single fire" vs "double fire"
  • From: Rick Lindstedt <rick@mafb.org>
• Re: 165 ECM question, "single fire" vs "double fire"
  • From: romans@starstream.net (Romans, Mark)
• Re: Spark Plugs....
  • From: "Programmer" <nwester@eidnet.org>
• Re: 165 ECM question, "single fire" vs "double fire"
  • From: Kevin Crain <kevin@warpten.com>
• Re: Scanner sw for a '94 LT1 caprice.
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: 165 ECM question, "single fire" vs "double fire"
  • From: romans@starstream.net (Romans, Mark)
• RE: Scanner sw for a '94 LT1 caprice.
  • From: "Rodney Fulk" <elixir@pathwaynet.com>
• Seeking '749
  • From: Bill Shaw <bshaw@connix.com>
• Re: 165 ECM question, "single fire" vs "double fire"
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• 1981 Cadillac Fleetwood Brougham d'Elegance
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Turbo V6 Tuniing continued
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Spark Plugs....
  • From: "nacelp" <nacelp@bright.net>
• Re: Turbo V6 Tuniing continued
  • From: "TK" <terryk@foothill.net>
• Re: 165 ECM question, "single fire" vs "double fire"
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 165 ECM question, "single fire" vs "double fire"
  • From: "nacelp" <nacelp@bright.net>
• Re: 1981 Cadillac Fleetwood Brougham d'Elegance
  • From: "nacelp" <nacelp@bright.net>
• Re: 165 ECM question, "single fire" vs "double fire"
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: 165 ECM question, "single fire" vs "double fire"
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: 165 ECM question, "single fire" vs "double fire"
  • From: "nacelp" <nacelp@bright.net>
• RE: Spark Plugs....now could be marelli computer
  • From: Carl Summers <InTech@writeme.com>
• Re: 1981 Cadillac Fleetwood Brougham d'Elegance
  • From: ECMnut@aol.com
• Re: 165 ECM question, "single fire" vs "double fire"
  • From: ECMnut@aol.com
• Re: 1981 Cadillac Fleetwood Brougham d'Elegance
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: 1981 Cadillac Fleetwood Brougham d'Elegance
  • From: Kevin Wong <brougham1@home.com>
• Re: Turbo V6 Tuniing continued
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Voltage MAF with 1227730
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: 165 ECM question, "single fire" vs "double fire"
  • From: Kevin Crain <warpten@warpten.com>
• Dead PB-10
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: Spark Plugs....
  • From: Rex Weatherford <rex.weatherford@mentisys.com>
• Re: Turbo V6 Tuniing continued + Benchtop ECU
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: Spark Plugs....
  • From: John_Calabrese@ENGELHARD.COM
• Re: Spark Plugs....
  • From: Gabe <gellett@earthlink.net>
• diacom on 95 3.1
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• Re: Spark Plugs....
  • From: "nacelp" <nacelp@bright.net>
• Gal/Hr and Grm/Sec Info
  • From: JTesta1966@aol.com
• Re: Turbo V6 Tuniing continued + Benchtop ECU
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: diacom on 95 3.1
  • From: "nacelp" <nacelp@bright.net>
• Re: diacom on 95 3.1
  • From: Rex Weatherford <rex.weatherford@mentisys.com>
• Re: 165 ECM question, "single fire" vs "double fire"
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Re: diacom on 95 3.1
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• Re: diacom on 95 3.1
  • From: "nacelp" <nacelp@bright.net>
• Re: diacom on 95 3.1
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• Re: diacom on 95 3.1
  • From: Rex Weatherford <rex.weatherford@mentisys.com>
• Re: Spark Plugs....
  • From: John_Calabrese@ENGELHARD.COM
• Re: Spark Plugs....
  • From: "nacelp" <nacelp@bright.net>
• Re: 165 ECM question, "single fire" vs "double fire"
  • From: Rick Lindstedt <rick@mafb.org>
• Re: Spark Plugs....
  • From: Nico Over <nicomax@erols.com>
• 1981 Cadillac Fleetwood Brougham d'Elegance
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• RE: Spark Plugs....torquemasters
  • From: Carl Summers <InTech@writeme.com>
• Re: Spark Plugs....torquemasters
  • From: "nacelp" <nacelp@bright.net>
• Intercooler temps (again)
  • From: "nacelp" <nacelp@bright.net>
• IAT / MATs
  • From: "nacelp" <nacelp@bright.net>
• Re: Intercooler temps (again)
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• RE: IAT / MATs
  • From: Carl Summers <InTech@writeme.com>
• Re: IAT / MATs
  • From: "Jim Sloan" <leroy@sunflower.com>
• Re: IAT / MATs
  • From: "nacelp" <nacelp@bright.net>
• Re: Intercooler temps (again)
  • From: "nacelp" <nacelp@bright.net>
• Re: 1981 Cadillac Fleetwood Brougham d'Elegance
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• RE: Spark Plugs....
  • From: "Rodney Fulk" <elixir@pathwaynet.com>
• Re: Intercooler temps (again)
  • From: ECMnut@aol.com
• Re: Intercooler temps (again)
  • From: "nacelp" <nacelp@bright.net>
• Re: IAT / MATs
  • From: "nacelp" <nacelp@bright.net>
• RE: Intercooler temps (again)
  • From: Carl Summers <InTech@writeme.com>
• Re: Intercooler temps (again)
  • From: ECMnut@aol.com
• Re: Intercooler temps (again)
  • From: "nacelp" <nacelp@bright.net>
• Spark Plugs...Indexing
  • From: romans@starstream.net (Romans, Mark)
• Re :Intercooler/o2 volts/Injector constant
  • From: Dig <turbodig@yahoo.com>
• Filtmph and boost tables followup
  • From: Dig <turbodig@yahoo.com>
• Re: IAT / MATs
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Re :Intercooler/o2 volts/Injector constant
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Re :Intercooler/o2 volts/Injector constant
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: Spark Plugs...Indexing
  • From: Mike from West Australia <erazmus@wantree.com.au>
• RE: Intercooler temps (again)
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: Re :Intercooler/o2 volts/Injector constant
  • From: "nacelp" <nacelp@bright.net>
• Re: Intercooler temps (again)
  • From: "nacelp" <nacelp@bright.net>
• 16bit MAF xfer function in '165
  • From: "NickG" <nikog@mediaone.net>
• Re: Spark Plugs...Indexing
  • From: "nacelp" <nacelp@bright.net>
• Re: Re :Intercooler/o2 volts/Injector constant
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Intercooler temps (again)
  • From: "nacelp" <nacelp@bright.net>
• RE: Intercooler temps (again)
  • From: Michael Hagopian <mhagopia@vt.edu>
• DIACOM Errors
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: DIACOM Errors
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: DIACOM Errors
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Spark Plugs...Indexing
  • From: romans@starstream.net (Romans, Mark)
• Re: Spark Plugs...Indexing
  • From: "nacelp" <nacelp@bright.net>
• Re: Spark Plugs....now could be marelli computer
  • From: "Programmer" <nwester@eidnet.org>
• Intercooler info.
  • From: "nacelp" <nacelp@bright.net>
• Re: 16bit MAF xfer function in '165
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Re :Intercooler/o2 volts/Injector constant
  • From: Mike from West Australia <erazmus@wantree.com.au>
• Re: 16bit MAF xfer function in '165
  • From: romans@starstream.net (Romans, Mark)
• Re: Gal/Hr and Grm/Sec Info
  • From: Ludis Langens <ludis@cruzers.com>
• Trans Computer
  • From: "Rodney Fulk" <elixir@pathwaynet.com>
• Re: 16bit MAF xfer function in '165
  • From: "NickG" <nikog@mediaone.net>
• Re: 16bit MAF xfer function in '165
  • From: "NickG" <nikog@mediaone.net>
• RE: Intercooler temps (again)
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Fun times. . .
  • From: rr <RRauscher@nni.com>
• 16bit MAF xfer function in '165
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• New ALDL 2 transistor circuit (critique)
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• RE: New ALDL 2 transistor circuit (critique)
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: New ALDL 2 transistor circuit (critique)
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• '165 o2 switching v/s WOT level
  • From: "Dave Zug." <dzug@delanet.com>
• Problem reading original EPROM
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Quad4 Update (off topic)
  • From: Rex Weatherford <rex.weatherford@mentisys.com>
• Re: 2 transistor interface
  • From: Dig <turbodig@yahoo.com>
• Re: Problem reading original EPROM
  • From: "Patrick G. Moore" <pmoore@cmr.gov>
• Idle Learn
  • From: "Jeff Flanary" <jefff@mounet.com>
• RE: Problem reading original EPROM
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: 16bit MAF xfer function in '165
  • From: "Dave Zug." <dzug@delanet.com>
• Re: Fun times. . .
  • From: "nacelp" <nacelp@bright.net>
• Re: Problem reading original EPROM
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Idle Learn
  • From: rr <RRauscher@nni.com>
• Re: Fun times. . .
  • From: rr <RRauscher@nni.com>
• Re: Problem reading original EPROM
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Problem reading original EPROM
  • From: romans@starstream.net (Romans, Mark)
• Cheap, (But is it crap?) GM Code reader F.S.
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Cheap, (But is it crap?) GM Code reader F.S.
  • From: Shawn Lin <slin01@mail.orion.org>
• Re: Cheap, (But is it crap?) GM Code reader F.S.
  • From: "cbrooks1 " <cbrooks1@mail.tqci.net>
• Re: Problem reading original EPROM
  • From: "Jeff Kopp" <jkopp@direcpc.com>
• Re: Idle Learn
  • From: "Jeff Flanary" <jefff@mounet.com>
• Re: Cheap, (But is it crap?) GM Code reader F.S.
  • From: "93 Formula" <red93formula@hotmail.com>
• Benchtop ECU question
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: Fun times. . .
  • From: Ernst denBroeder <ernst@employees.org>
• First chip ready
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: First chip ready
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: Fun times. . .
  • From: Doug Dayson <djdayson@home.com>
• RE: First chip ready
  • From: "trax" <trax@frederickmd.com>
• RE: First chip ready
  • From: Pat Ford <pford@qnx.com>
• Trinoic Engine Management System
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Trinoic Engine Management System
  • From: "nacelp" <nacelp@bright.net>
• Re: first chip done
  • From: "Russ Harms" <global.geolab@memlane.com>
• Re: Trinoic Engine Management System
  • From: garwillis@msn.com (Garfield Willis)
• Re: Benchtop ECU question
  • From: "nacelp" <nacelp@bright.net>
• Re: first chip done
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• I/O Ports in Assembler
  • From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
• Re: Fun times. . .
  • From: "nacelp" <nacelp@bright.net>
• Re: Problem reading original EPROM
  • From: "Programmer" <nwester@eidnet.org>
• Re: First chip ready
  • From: "Programmer" <nwester@eidnet.org>
• Re: Fun times. . .
  • From: Shannen Durphey <shannen@grolen.com>
• Re: First chip ready
  • From: Shannen Durphey <shannen@grolen.com>
• Re: First chip ready
  • From: Shannen Durphey <shannen@grolen.com>
• Re: First chip ready
  • From: "nacelp" <nacelp@bright.net>
• Re: First chip ready
  • From: Shannen Durphey <shannen@grolen.com>
• Test - Ignore
  • From: "Walter Sherwin" <wsherwin@idirect.com>
• Re: Idle Learn
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: Benchtop ECU question
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: First chip ready
  • From: "Thomas Matthews" <tmatthew@stny.rr.com>
• Re: Benchtop ECU question
  • From: "nacelp" <nacelp@bright.net>
• Re: Fun times. . .
  • From: Bob Valentine <bob@tecmark.com>
• Changing Injector Constant
  • From: "93 Formula" <red93formula@hotmail.com>
• Re: Trinoic Engine Management System
  • From: Mike from West Australia <erazmus@wantree.com.au>
• Re: I/O Ports in Assembler
  • From: Ludis Langens <ludis@cruzers.com>
• Re: I/O Ports in Assembler
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• RE: First chip ready
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: Problem reading original EPROM
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Changing Injector Constant
  • From: DC Smith <morepoweral@tetranet.net>
• Re: Fun times. . .
  • From: Ernst denBroeder <ernst@employees.org>
• ECM Bench
  • From: "nacelp" <nacelp@bright.net>
• Dayton Hamvention Hamfest
  • From: Steven Ciciora <ciciora@Ciciora.com>
• Burner for sale
  • From: "nacelp" <nacelp@bright.net>
• Re: Dayton Hamvention Hamfest
  • From: "nacelp" <nacelp@bright.net>
• 91 Pont Brain Teaser
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: ECM Bench
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: 91 Pont Brain Teaser
  • From: Squash <realsquash@yahoo.com>
• Re: 91 Pont Brain Teaser
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: 91 Pont Brain Teaser
  • From: "nacelp" <nacelp@bright.net>
• Reorted O2 volts
  • From: "nacelp" <nacelp@bright.net>
• Re: 91 Pont Brain Teaser
  • From: Ed Stoll <edstoll2019@yahoo.com>
• Looking at Diacom
  • From: "nacelp" <nacelp@bright.net>
• Looking for .bin
  • From: Shannen Durphey <shannen@grolen.com>
• Base Pulse Widths
  • From: "nacelp" <nacelp@bright.net>
• Re: ECM Bench
  • From: "nacelp" <nacelp@bright.net>
• Re: Reorted O2 volts
  • From: Bob Valentine <bob@tecmark.com>
• Re: Reorted O2 volts
  • From: Ludis Langens <ludis@cruzers.com>
• Re: I/O Ports in Assembler
  • From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
• .Bin found
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Reported O2 volts
  • From: "nacelp" <nacelp@bright.net>
• Re: Looking at Diacom
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• RE: Looking at Diacom
  • From: "Matt Tomlins" <mattpw@ozemail.com.au>
• EPROM won't program correctly
  • From: "trax" <trax@frederickmd.com>
• Re: 91 Pont Brain Teaser
  • From: Laura & Neil <neilaura@earthlink.net>
• Re: EPROM won't program correctly
  • From: "Jeff Flanary" <jefff@mounet.com>
• code 13 on 89 cavalier.. 730 ecm
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: code 13 on 89 cavalier.. 730 ecm
  • From: JTesta1966@aol.com
• [no subject]
  • From: rrauscher@nni.com
• Diacom Help
  • From: Rex Weatherford <rex.weatherford@mentisys.com>
• Re: Diacom Help
  • From: Kevin Crain <warpten@warpten.com>
• Re:
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Diacom Help
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Diacom Help
  • From: "nacelp" <nacelp@bright.net>
• Re: Diacom Help
  • From: "nacelp" <nacelp@bright.net>
• Re:
  • From: "nacelp" <nacelp@bright.net>
• 16141470 ECU
  • From: "Scott Flanagan" <flanaj@mindspring.com>
• Re: Diacom Help
  • From: Rex Weatherford <rex.weatherford@mentisys.com>
• Re: code 13 on 89 cavalier.. 730 ecm
  • From: Chipsbyal@aol.com
• Re: 16141470 ECU
  • From: "nacelp" <nacelp@bright.net>
• Re: code 13 on 89 cavalier.. 730 ecm
  • From: "nacelp" <nacelp@bright.net>
• Re: EPROM won't program correctly
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: Diacom Help
  • From: "Dave Zug." <dzug@delanet.com>
• Re: Diacom Help
  • From: Roger Heflin <rah@horizon.hit.net>
• Re:
  • From: rrauscher@nni.com
• Re: Diacom Help
  • From: "nacelp" <nacelp@bright.net>
• Re: Diacom Help
  • From: "Dave Zug." <dzug@delanet.com>
• eprom id
  • From: "fat slug" <slowfatslug@hotmail.com>
• Re:
  • From: rrauscher@nni.com
• Re: eprom id
  • From: steve ravet <sravet@arm.com>
• Re: Diacom Help
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Diacom Help
  • From: Barry Tisdale <btisdale@cybersol.com>
• DTC pop quiz
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: DTC pop quiz
  • From: Ken Kelly <PCMdoc@surfree.com>
• Re: DTC pop quiz
  • From: "nacelp" <nacelp@bright.net>
• EPROM Reader Problems Deleting Chip? EMERGENCY
  • From: "Scott Flanagan" <flanaj@mindspring.com>
• ION Plugs
  • From: romans@starstream.net (Romans, Mark)
• Re: EPROM Reader Problems Deleting Chip? EMERGENCY
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Problem at Ludis' site
  • From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
• Re: Diacom Help
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: DTC pop quiz
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Problem at Ludis' site
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Problem at Ludis' site
  • From: "nacelp" <nacelp@bright.net>
• Re: DTC pop quiz, Correction
  • From: "nacelp" <nacelp@bright.net>
• Re: Problem at Ludis' site
  • From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
• RE: eprom id
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: ION Plugs
  • From: "Dave Zug." <dzug@delanet.com>
• RE: eprom id
  • From: "fat slug" <slowfatslug@hotmail.com>
• Re: code 13 on 89 cavalier.. 730 ecm
  • From: "Programmer" <nwester@eidnet.org>
• RE: EPROM Reader Problems Deleting Chip? EMERGENCY
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Automobile Ride, Handling, and Suspension
  • From: "nacelp" <nacelp@bright.net>
• Scope vs reported
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: fuel pressure vs altitude
  • From: "nacelp" <nacelp@bright.net>
• 7747 Spark Map ?
  • From: "Marvin Johnson" <Wdnbtbldr@proaxis.com>
• RE: EPROM Reader Problems Deleting Chip? EMERGENCY
  • From: Squash <realsquash@yahoo.com>
• The Physics of Racing
  • From: garwillis@msn.com (Garfield Willis)
• Re: Fw: MSD sellin Crap Still
  • From: Eric Deslauriers <edeslaur@us.oracle.com>
• Re: 7747 Spark Map ?
  • From: rr <RRauscher@nni.com>
• Re: Automobile Ride, Handling, and Suspension
  • From: garwillis@msn.com (Garfield Willis)
• ALDL Reported BPW
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: Scope vs reported
  • From: ECMnut@aol.com
• Re: Problem at Ludis' site
  • From: Shannen Durphey <shannen@grolen.com>
• Quad 4 code
  • From: cwagner@info2000.net
• Re: Quad 4 code
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Scope vs reported
  • From: "nacelp" <nacelp@bright.net>
• Re: ALDL Reported BPW
  • From: rr <RRauscher@nni.com>
• Re: Quad 4 code
  • From: "nacelp" <nacelp@bright.net>
• Re: Quad 4 code
  • From: "nacelp" <nacelp@bright.net>
• Re: Scope vs reported
  • From: "nacelp" <nacelp@bright.net>
• 0-25d C MAT IAT
  • From: "nacelp" <nacelp@bright.net>
• A few lt1 ?'s
  • From: "Mike" <itsmike@lvcm.com>
• Re: A few lt1 ?'s
  • From: Chipsbyal@aol.com
• EPROMs are programming AOK
  • From: "TRAX" <trax@frederickmd.com>
• Re: ALDL Reported BPW
  • From: ECMnut@aol.com
• Re: Scope vs reported
  • From: ECMnut@aol.com
• Re: A few lt1 ?'s
  • From: "Mike" <itsmike@lvcm.com>
• Re: EPROMs are programming AOK
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: A few lt1 ?'s
  • From: Shannen Durphey <shannen@grolen.com>
• Re: EPROMs are programming AOK
  • From: Shannen Durphey <shannen@grolen.com>
• TPS Style Connectors: Where to find?
  • From: "Tom Meagher" <tmeagher@netropolis.net>
• Re: EPROMs are programming AOK
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Problem at Ludis' site
  • From: Ludis Langens <ludis@cruzers.com>
• Re: TPS Style Connectors: Where to find?
  • From: JTesta1966@aol.com
• Re: A few lt1 ?'s
  • From: Chipsbyal@aol.com
• CPU Register Serial Data Readings.
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• PWs & misc.
  • From: Roseanna Tisdale <rbt1@btc-bci.com>
• Scope vs reported + 02 as reported
  • From: "nacelp" <nacelp@bright.net>
• Re: A few lt1 ?'s
  • From: "Mike" <itsmike@lvcm.com>
• Re: A few lt1 ?'s
  • From: Ken Kelly <PCMdoc@surfree.com>
• Re: A few lt1 ?'s
  • From: Len sabatine <sabatine@epix.net>
• Injector duty cycle formula?
  • From: Rex Weatherford <rweatherford@mindspring.com>
• Re: A few lt1 ?'s
  • From: "Programmer" <nwester@eidnet.org>
• Re: A few lt1 ?'s
  • From: Chipsbyal@aol.com
• Re: A few lt1 ?'s
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: A few lt1 ?'s
  • From: "nacelp" <nacelp@bright.net>
• Re: Injector duty cycle formula?
  • From: "nacelp" <nacelp@bright.net>
• Re: Injector duty cycle formula?
  • From: "David C. Allen" <davida@primenet.com>
• Re: Injector duty cycle formula?
  • From: "nacelp" <nacelp@bright.net>
• Re: Injector duty cycle formula?
  • From: Rex Weatherford <rweatherford@mindspring.com>
• Re: Injector duty cycle formula? Graphing diagnostics
  • From: "nacelp" <nacelp@bright.net>
• Re: Injector duty cycle formula? Graphing diagnostics
  • From: Rex Weatherford <rweatherford@mindspring.com>
• Re: Injector duty cycle formula? Graphing diagnostics
  • From: "nacelp" <nacelp@bright.net>
• RE: ecm newbie
  • From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
• Re: ecm newbie
  • From: "nacelp" <nacelp@bright.net>
• Re: ecm newbie
  • From: "nacelp" <nacelp@bright.net>
• Re: A few lt1 ?'s
  • From: "Mike" <itsmike@lvcm.com>
• Re: A few lt1 ?'s
  • From: "Mike" <itsmike@lvcm.com>
• Re: A few lt1 ?'s
  • From: Chipsbyal@aol.com
• Re: A few lt1 ?'s
  • From: "Mike" <itsmike@lvcm.com>
• Flying Cow?
  • From: garwillis@msn.com (Garfield Willis)
• ECM Code reader
  • From: "Dave Zug" <dzug@delanet.com>
• Re: A few lt1 ?'s
  • From: Ken Kelly <PCMdoc@surfree.com>
• Re: Scope vs reported + 02 as reported
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Scope vs reported + 02 as reported
  • From: ECMnut@aol.com
• Re: TPS Style Connectors: Where to find?
  • From: Squash <realsquash@yahoo.com>
• Re: Scope vs reported + 02 as reported
  • From: "nacelp" <nacelp@bright.net>
• Re: A few lt1 ?'s
  • From: "black maj" <blackmin@hotmail.com>
• Re: Scope vs reported + 02 as reported
  • From: ECMnut@aol.com
• Re: ECM Code reader
  • From: "nacelp" <nacelp@bright.net>
• Whatsa 2732DC?
  • From: "nacelp" <nacelp@bright.net>
• Re: Scope vs reported + 02 as reported
  • From: Roseanna Tisdale <rbt1@btc-bci.com>
• 7749 ECU PW musings.....
  • From: Roseanna Tisdale <rbt1@btc-bci.com>
• Re: 7749 ECU PW musings.....
  • From: "nacelp" <nacelp@bright.net>
• Re: 7749 ECU PW musings.....
  • From: Roseanna Tisdale <rbt1@btc-bci.com>
• Re: A few lt1 ?'s
  • From: "Mike" <itsmike@lvcm.com>
• Re: Whatsa 2732DC?
  • From: thergen@svn.net
• Re: Whatsa 2732DC?
  • From: "nacelp" <nacelp@bright.net>
• Re: EPROMs are programming AOK
  • From: "TRAX" <trax@frederickmd.com>
• Re: EPROMs are programming AOK
  • From: "TRAX" <trax@frederickmd.com>
• Re: A few lt1 ?'s
  • From: Ken Kelly <PCMdoc@surfree.com>
• Re: EPROMs are programming AOK
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Injector duty cycle formula? Graphing diagnostics
  • From: Rex Weatherford <rweatherford@mindspring.com>
• Re: Injector duty cycle formula? Graphing diagnostics
  • From: "nacelp" <nacelp@bright.net>
• EGOR Sneek Peek
  • From: garwillis@msn.com (Garfield Willis)
• Re: 7749 ECU PW musings.....
  • From: ECMnut@aol.com
• New 4-cyl 1227727 bin
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 7749 ECU PW musings.....
  • From: "nacelp" <nacelp@bright.net>
• s2bin converter
  • From: "nacelp" <nacelp@bright.net>
• Finding direction without a MAP...
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Finding direction without a MAP...
  • From: "nacelp" <nacelp@bright.net>
• RE: Finding direction without a MAP...
  • From: "Craig Marcho" <marcho@flash.net>
• Re: Finding direction without a MAP...
  • From: romans@starstream.net (Romans, Mark)
• Re: 7749 ECU PW musings.....
  • From: "Dave Zug" <dzug@delanet.com>
• Re: A few lt1 ?'s
  • From: "Mike" <itsmike@lvcm.com>
• Re: s2bin converter
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Memcal ESC Filter Numbers
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Memcal ESC Filter Numbers
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Finding direction without a MAP...
  • From: Shannen Durphey <shannen@grolen.com>
• Re: A few lt1 ?'s
  • From: Scott Peitzsch <jlg-sep@mediaone.net>
• Bin needed
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Injector duty cycle formula? Graphing diagnostics
  • From: Rex Weatherford <rex.weatherford@mentisys.com>
• Re: Injector duty cycle formula? Graphing diagnostics
  • From: "nacelp" <nacelp@bright.net>
• Re: Bin needed
  • From: "nacelp" <nacelp@bright.net>
• Re: Injector duty cycle formula? Graphing diagnostics
  • From: Rex Weatherford <rex.weatherford@mentisys.com>
• Re: Bin needed
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Bin needed
  • From: "nacelp" <nacelp@bright.net>
• Re: Bin needed
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Injector duty cycle formula? Graphing diagnostics
  • From: "nacelp" <nacelp@bright.net>
• Re: EPROMs are programming AOK
  • From: steve ravet <sravet@arm.com>
• Re: Injector duty cycle formula? Graphing diagnostics
  • From: Rex Weatherford <rex.weatherford@mentisys.com>
• Archive info
  • From: Squash <realsquash@yahoo.com>
• Re: A few lt1 ?'s
  • From: "nacelp" <nacelp@bright.net>
• Re: Archive info
  • From: "Jim Sloan" <leroy@sunflower.com>
• Re: Archive info
  • From: Squash <realsquash@yahoo.com>
• Re: Archive info
  • From: Squash <realsquash@yahoo.com>
• Re: A few lt1 ?'s
  • From: Jennifer Green & Scott Peitzsch <jlg-sep@mediaone.net>
• Re: A few lt1 ?'s
  • From: "nacelp" <nacelp@bright.net>
• RE: Diacom Help
  • From: Dave Plummer <davepl@MICROSOFT.com>
• 749 questions
  • From: Bill Shaw <bshaw@connix.com>
• Re: 749 questions
  • From: Shannen Durphey <shannen@grolen.com>
• ebay '727
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: 730 ecm
  • From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
• Re: Idle Learn
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: 730 ecm
  • From: "nacelp" <nacelp@bright.net>
• ANLX-5474 update?
  • From: Mika.Helander@softbit.fi
• RE: Turbo V6 Tuniing continued/Intronics Emulator update
  • From: "Rudi Machilek" <Rudi@vnet.net>
• Re: A few lt1 ?'s
  • From: "Programmer" <nwester@eidnet.org>
• RE: Astro Van PCM was--->Running a 305 with '747
  • From: "Kurek, Larry" <lkurek@anl.gov>
• Re: 749 questions
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Turbo V6 Tuniing continued
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Turbo V6 Tuniing continued/Intronics Emulator update/checksum
  • From: "Jeff M" <tystorm@email.msn.com>
• RE: EPROMs are programming AOK
  • From: "trax" <trax@frederickmd.com>
• Re: ANLX-5474 update?YES
  • From: Chipsbyal@aol.com
• Piggy backing 165 ECM chips
  • From: Rick Lindstedt <rick@mafb.org>
• Re: Piggy backing 165 ECM chips
  • From: Roger Heflin <rah@horizon.hit.net>
• Coil Connector Question
  • From: Squash <realsquash@yahoo.com>
• Re: Coil Connector Question
  • From: steve ravet <sravet@arm.com>
• Re: EPROMs are programming AOK
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: ANLX-5474 update?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 749 questions
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Coil Connector Question
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 749 questions
  • From: Bill Shaw <bshaw@connix.com>
• Re: Turbo V6 Tuniing continued/Intronics Emulator update
  • From: "nacelp" <nacelp@bright.net>
• Re: 730 ecm
  • From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
• EPROM Switching
  • From: "nacelp" <nacelp@bright.net>
• RE: ANLX-5474 update?
  • From: Mika.Helander@softbit.fi
• RE: EPROMs are programming AOK
  • From: Mika.Helander@softbit.fi
• RE: ANLX-5474 update?YES
  • From: Mika.Helander@softbit.fi
• Re: Coil Connector Question
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Astro Van PCM was--->Running a 305 with '747
  • From: Ludis Langens <ludis@cruzers.com>
• Re: EPROM Switching
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Coil Connector Question
  • From: "Jeff Flanary" <jefff@mounet.com>
• RE: Coil Connector Question
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: Piggy backing 165 ECM chips
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• re: Re: Memory Emulator (was ASBX code is AMXY)
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: ANLX-5474 update?
  • From: "nacelp" <nacelp@bright.net>
• O2 volts diacom and the 1227148
  • From: "nacelp" <nacelp@bright.net>
• Data on 16034984
  • From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
• Re: Delco controllers
  • From: Pat Ford <pford@qnx.com>
• Re: Data on 16034984
  • From: Ludis Langens <ludis@cruzers.com>
• Fabulous Service @ Needhams
  • From: "nacelp" <nacelp@bright.net>
• Re: Fabulous Service @ Needhams
  • From: Chipsbyal@aol.com
• Re: Data on 16034984
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: ECM Code reader
  • From: "Programmer" <nwester@eidnet.org>
• Re: Coil Connector Question
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Fabulous Service @ Needhams
  • From: "Programmer" <nwester@eidnet.org>
• Delco controllers
  • From: Mike from West Australia <erazmus@wantree.com.au>
• Re: Fabulous Service @ Needhams
  • From: "nacelp" <nacelp@bright.net>
• Re: Fabulous Service @ Needhams
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Fabulous Service @ Needhams
  • From: "nacelp" <nacelp@bright.net>
• Re: Fabulous Service @ Needhams
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Fabulous Service @ Needhams
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• .LT1 to .bin conversion
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: .LT1 to .bin conversion
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Just soo obvious
  • From: "nacelp" <nacelp@bright.net>
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: ECMnut@aol.com
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: "nacelp" <nacelp@bright.net>
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: Thomas McCabe <mccabet@mediaone.net>
• Fuel Injector Connector - *the MALE side* ?
  • From: garwillis@msn.com (Garfield Willis)
• akdx2088 vs akmh1143
  • From: "Marvin Johnson" <Wdnbtbldr@proaxis.com>
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: garwillis@msn.com (Garfield Willis)
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: garwillis@msn.com (Garfield Willis)
• Re: Piggy backing 165 ECM chips
  • From: DC Smith <morepoweral@tetranet.net>
• Faulty Injector - Clues
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Faulty Injector - Clues
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Just soo obvious
  • From: Pat Ford <pford@qnx.com>
• pic of memcal
  • From: Pat Ford <pford@qnx.com>
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Faulty Injector - Clues
  • From: "nacelp" <nacelp@bright.net>
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: .LT1 to .bin conversion
  • From: Eric Clark <eclark@hoser.com>
• Re: pic of memcal
  • From: "Programmer" <nwester@eidnet.org>
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: garwillis@msn.com (Garfield Willis)
• pcm controlled nitrous
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• RE: pcm controlled nitrous
  • From: Scott Parkhurst <ScottP@mcmullenargus.com>
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: garwillis@msn.com (Garfield Willis)
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: Len sabatine <sabatine@epix.net>
• Nice Cheap Essential Tool for SMT work...
  • From: garwillis@msn.com (Garfield Willis)
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: "Rich Vandervoort" <richvandervoort@hotmail.com>
• RE: P&H Injector Interface
  • From: Eric Aos <EOA@spartek.com>
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: garwillis@msn.com (Garfield Willis)
• Re: Suppliers
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: P&H Injector Interface/Accel VIC
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: "nacelp" <nacelp@bright.net>
• Re: Suppliers
  • From: "C. Brooks" <cbrooks1@tqci.net>
• CSH, HQ closed for a few days
  • From: "nacelp" <nacelp@bright.net>
• Suppliers
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: CSH, HQ closed for a few days
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: P&H Injector Interface
  • From: Len sabatine <sabatine@epix.net>
• Re: Suppliers
  • From: "nacelp" <nacelp@bright.net>
• Re: CSH, HQ closed for a few days
  • From: JTesta1966@aol.com
• P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: Len sabatine <sabatine@epix.net>
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: "Patrick G. Moore" <pmoore@cmr.gov>
• Not as OT as it might seem :)
  • From: Eric Aos <EOA@spartek.com>
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: "Rich Vandervoort" <richvandervoort@hotmail.com>
• Re: CSH, HQ closed for a few days
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: Suppliers fyresleeving
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Flash mis-wring
  • From: "TK" <terryk@foothill.net>
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: Frank F Parker <fparker@umich.edu>
• Re: CSH, HQ closed for a few days
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: garwillis@msn.com (Garfield Willis)
• Re: Fabulous Service @ Needhams
  • From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
• Re: Fabulous Service @ Needhams
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: Fabulous Service @ Needhams
  • From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
• Re: pic of memcal
  • From: Shawn Lin <slin01@mail.orion.org>
• Re: CSH, HQ closed for a few days
  • From: ECMnut@aol.com
• Re: Suppliers fyresleeving
  • From: "Dave Zug" <dzug@delanet.com>
• Re: CSH, HQ closed for a few days
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Suppliers fyresleeving
  • From: "Swayze" <kswayze@bellsouth.net>
• RE: pcm controlled nitrous
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: pcm controlled nitrous
  • From: "nacelp" <nacelp@bright.net>
• Re: Suppliers fyresleeving
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Suppliers fyresleeving
  • From: "Jeff M" <tystorm@email.msn.com>
• Prom Carriers
  • From: "nacelp" <nacelp@bright.net>
• Re: P&H Injector Interface
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Re: P&H Injector Interface
  • From: romans@starstream.net (Romans, Mark)
• Chip upgrades
  • From: KasaRyan@aol.com
• Re:Prom Carriers
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: P&H Injector Interface
  • From: Len sabatine <sabatine@epix.net>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: romans@starstream.net (Romans, Mark)
• Re: P&H Injector Interface
  • From: Len sabatine <sabatine@epix.net>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Re: P&H Injector Interface
  • From: Laura & Neil <neilaura@earthlink.net>
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Re: P&H Injector Interface
  • From: Len sabatine <sabatine@epix.net>
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• coil repair harness #'s
  • From: Shannen Durphey <shannen@grolen.com>
• Re: P&H Injector Interface
  • From: Shannen Durphey <shannen@grolen.com>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: Prom Carriers
  • From: ECMnut@aol.com
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Back to Diacom
  • From: "nacelp" <nacelp@bright.net>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: coil repair harness #'s
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Software and ALDL
  • From: MdntRdr1@aol.com
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• EFIlive & SyTys
  • From: Barry Tisdale <btisdale@cybersol.com>
• Convert 6 cyl tacho for use with 4 cyl
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• P&H Injector Interface
  • From: romans@starstream.net (Romans, Mark)
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Re: Software and ALDL
  • From: "nacelp" <nacelp@bright.net>
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Re: Software and ALDL
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: Apologies
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• request for ecu.files
  • From: "dkubus" <dkubus@kki.net.pl>
• PD: request for ecu.files
  • From: "dkubus" <dkubus@kki.net.pl>
• Simulator error??
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Convert 6 cyl tacho for use with 4 cyl
  • From: "black maj" <blackmin@hotmail.com>
• Re: Convert 6 cyl tacho for use with 4 cyl
  • From: Shawn Lin <slin01@mail.orion.org>
• Re: Convert 6 cyl tacho for use with 4 cyl
  • From: "black maj" <blackmin@hotmail.com>
• Re: Convert 6 cyl tacho for use with 4 cyl
  • From: Shawn Lin <slin01@mail.orion.org>
• Re: Software and ALDL
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Re: Convert 6 cyl tacho for use with 4 cyl
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: Simulator error??
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: P&H Injector Interface
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Re: P&H Injector Interface
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• Re: Convert 6 cyl tacho for use with 4 cyl
  • From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
• Re: P&H Injector Interface
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: P&H Injector Interface
  • From: "nacelp" <nacelp@bright.net>
• DataStream Definition
  • From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• re; p&h injector driver
  • From: KasaRyan@aol.com
• RE: Convert 6 cyl tacho for use with 4 cyl
  • From: "Scott Feaver" <scott@j-body.com>
• Re: Convert 6 cyl tacho for use with 4 cyl
  • From: Ludis Langens <ludis@cruzers.com>
• Re: re; p&h injector driver
  • From: "nacelp" <nacelp@bright.net>
• Re: re; p&h injector driver
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Convert 6 cyl tacho for use with 4 cyl
  • From: "TK" <terryk@foothill.net>
• RE: re; p&h injector driver
  • From: Carl Summers <InTech@writeme.com>
• Re: re; p&h injector driver
  • From: garwillis@msn.com (Garfield Willis)
• Is this a good deal?
  • From: Bob Valentine <bob@tecmark.com>
• Re: Convert 6 cyl tacho for use with 4 cyl
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: Is this a good deal?
  • From: "nacelp" <nacelp@bright.net>
• Is this a good deal?
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: Is this a good deal?
  • From: Squash <realsquash@yahoo.com>
• Re: Is this a good deal?
  • From: JTesta1966@aol.com
• Re: Is this a good deal?
  • From: Squash <realsquash@yahoo.com>
• Re: Is this a good deal?
  • From: KasaRyan@aol.com
• Re: Is this a good deal?
  • From: Matt S Bower <m.s.bower@cummins.com>
• tbi size
  • From: KasaRyan@aol.com
• ecu files
  • From: "dkubus" <dkubus@kki.net.pl>
• Re: Is this a good deal?
  • From: bearbvd@cmn.net (Greg Hermann)
• RE: Is this a good deal?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Injectors: P&H and SAT - Part 1
  • From: "Swayze" <kswayze@bellsouth.net>
• Injectors: P&H and SAT - Part 1
  • From: garwillis@msn.com (Garfield Willis)
• Injectors: P&H and SAT - Part 2
  • From: garwillis@msn.com (Garfield Willis)
• Re: Injectors: P&H and SAT - Part 1
  • From: garwillis@msn.com (Garfield Willis)
• Injectors: P&H and SAT - Part 3
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: P&H Injector Interface
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Injectors: P&H and SAT - Part 4
  • From: Len sabatine <sabatine@epix.net>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Injectors: P&H and SAT - Part 4
  • From: garwillis@msn.com (Garfield Willis)
• Need help understanding Fuel tables.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: P&H Injector Interface
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: P&H Injector Interface
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• '87 Vette .bin needed
  • From: "NickG" <nikog@mediaone.net>
• Re: '87 Vette .bin needed
  • From: Aaron G Kallotte <akallotte@juno.com>
• Re: '87 Vette .bin needed
  • From: "Jeff Kopp" <superchevyparts@mindspring.com>
• New Member to List: Heads-Up Display Q's
  • From: Dan Gentry <dang@seanet.com>
• Re: Injector driver
  • From: KasaRyan@aol.com
• Re: Need help understanding Fuel tables.
  • From: rr <RRauscher@nni.com>
• Re: Need help understanding Fuel tables.
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Im going CRAZY, WOT tuning is being a bastard! Running out offuel
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
  • From: ECMnut@aol.com
• RE: Heads up display
  • From: Dave Hempstead <dave_hempstead@agilent.com>
• Re: P&H Injector Interface
  • From: "Swayze" <kswayze@bellsouth.net>
• Chip ID
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
  • From: Ernst denBroeder <ernst@employees.org>
• Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
  • From: Len sabatine <sabatine@epix.net>
• Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
  • From: Len sabatine <sabatine@epix.net>
• RE: Im going CRAZY, WOT tuning is being a bastard! Running outoff uel
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Underhood Temperatures
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Im going CRAZY, WOT tuning is being a bastard! Running outoffuel
  • From: Gabe <gellett@earthlink.net>
• RE: Im going CRAZY, WOT tuning is being a bastard! Running outoffuel
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Need help understanding Fuel tables.
  • From: MdntRdr1@aol.com
• Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
  • From: Len sabatine <sabatine@epix.net>
• RE: Im going CRAZY, WOT tuning is being a bastard! Runningoutoffu el
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Need help understanding Fuel tables.
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
  • From: olbap <olbap@mail.mia.bellsouth.net>
• RE: Im going CRAZY, WOT tuning is being a bastard! Runningoutoffuel
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: P&H Injector Interface - the "Package"?
  • From: "Swayze" <kswayze@bellsouth.net>
• Underhood Temperatures
  • From: garwillis@msn.com (Garfield Willis)
• RE: Im going CRAZY, WOT tuning is being a bastard! Running outoffuel
  • From: Len sabatine <sabatine@epix.net>
• Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
  • From: Len sabatine <sabatine@epix.net>
• Re: P&H Injector Interface - the "Package"?
  • From: garwillis@msn.com (Garfield Willis)
• RE: Im going CRAZY, WOT tuning is being a bastard! Running outoffuel
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Underhood Temperatures
  • From: garwillis@msn.com (Garfield Willis)
• fuel pump info
  • From: steve ravet <sravet@arm.com>
• Re: fuel pump info
  • From: garwillis@msn.com (Garfield Willis)
• Fuel, Fuel, Fuel... why dont I have enough
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Heads up display
  • From: Dan Gentry <dang@seanet.com>
• Re: P&H Injector Interface
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Another VSS question
  • From: "John D. Bachman" <jdbachman@redrose.net>
• RE: Another VSS question
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Heads up display
  • From: Dan Gentry <dang@seanet.com>
• Re: Heads up display
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Got some new injectors! Best way to rescale?>
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Let me clarify on my last injector post
  • From: olbap <olbap@mail.mia.bellsouth.net>
• [Fwd: DIY_EFI_WWW]
  • From: steve ravet <sravet@arm.com>
• Re: Heads up display
  • From: Dan Gentry <dang@seanet.com>
• Re: Fuel, Fuel, Fuel... why dont I have enough
  • From: John_Calabrese@ENGELHARD.COM
• cts
  • From: Omer N Ozkul <obond@MIT.EDU>
• Re: Got some new injectors! Best way to rescale?>
  • From: JTesta1966@aol.com
• Re: Heads up display
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: Heads up display
  • From: Ken Kelly <PCMdoc@surfree.com>
• Re: Heads up display
  • From: Dan Gentry <dang@seanet.com>
• Re: Heads up display
  • From: "TK" <terryk@foothill.net>
• Re: Heads up display
  • From: "TK" <terryk@foothill.net>
• Bigger injectors didnt fix it :(
  • From: olbap <olbap@mail.mia.bellsouth.net>
• RE: Heads up display
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Heads up display
  • From: Dan Gentry <dang@seanet.com>
• Re: Heads up display
  • From: JTesta1966@aol.com
• GM Trip Computer
  • From: "Scott Feaver" <scott@j-body.com>
• Re: Heads up display
  • From: Ken Kelly <PCMdoc@surfree.com>
• Re: cts mounting -
  • From: KasaRyan@aol.com
• Re: Heads up display
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: GM Trip Computer
  • From: "TK" <terryk@foothill.net>
• Re: Heads up display
  • From: Ludis Langens <ludis@cruzers.com>
• '165 switching both fans from the ECM?
  • From: Kevin Crain <kevin@warpten.com>
• Re: '165 switching both fans from the ECM?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: '165 switching both fans from the ECM?
  • From: Kevin Crain <kevin@warpten.com>
• Re: cts
  • From: Shannen Durphey <shannen@grolen.com>
• Re: '165 switching both fans from the ECM?
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: '165 switching both fans from the ECM?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Is this a good deal?
  • From: "nacelp" <nacelp@bright.net>
• RE: GM Trip Computer
  • From: "Scott Feaver" <scott@j-body.com>
• Re: cts
  • From: "nacelp" <nacelp@bright.net>
• Re: GM Trip Computer
  • From: "TK" <terryk@foothill.net>
• Re: Injector driver
  • From: Ludis Langens <ludis@cruzers.com>
• Re: '165 switching both fans from the ECM?
  • From: Kevin Crain <kevin@warpten.com>
• Re: '165 switching both fans from the ECM?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: '165 switching both fans from the ECM?
  • From: Kevin Crain <kevin@warpten.com>
• Re: Is this a good deal?
  • From: "nacelp" <nacelp@bright.net>
• Re: Injector driver
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Chip ID
  • From: "nacelp" <nacelp@bright.net>
• Re: '87 Vette .bin needed
  • From: "nacelp" <nacelp@bright.net>
• re;re;P&H injector interface
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: re;re;P&H injector interface
  • From: "nacelp" <nacelp@bright.net>
• Re: '165 switching both fans from the ECM?
  • From: Kevin Crain <kevin@warpten.com>
• Re: '165 switching both fans from the ECM?
  • From: Kevin Crain <kevin@warpten.com>
• Re: '165 switching both fans from the ECM?
  • From: Kevin Crain <kevin@warpten.com>
• Re: '165 switching both fans from the ECM?
  • From: "David C. Allen" <davida@primenet.com>
• Re: P&H Injector Interface
  • From: garwillis@msn.com (Garfield Willis)
• Re: Bigger injectors didnt fix it :(
  • From: Glen Beard <gbeard1@nycap.rr.com>
• Re: alfa turbo using gm
  • From: Peter Gargano <peter@techedge.com.au>
• alfa turbo using gm
  • From: Peter Gargano <turboalfa@excite.com>
• Re: '165 switching both fans from the ECM?
  • From: Kevin Crain <kevin@warpten.com>
• Re: '165 switching both fans from the ECM?
  • From: Peter Gargano <peter@techedge.com.au>
• Re: '165 switching both fans from the ECM?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: cts
  • From: Omer N Ozkul <obond@MIT.EDU>
• Re: cts
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Bigger injectors didnt fix it :(
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: P&H Injector Interface - Wiring Approach
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: P&H Injector Interface - Wiring Approach
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: EGT
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: P&H Injector Interface - Wiring Approach
  • From: garwillis@msn.com (Garfield Willis)
• Re: P&H Injector Interface - Wiring Approach
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: '165 switching both fans from the ECM?
  • From: Shannen Durphey <shannen@grolen.com>
• EGT
  • From: "Dave Zug" <dzug@delanet.com>
• Re: '165 switching both fans from the ECM?
  • From: Peter Gargano <peter@techedge.com.au>
• Re: EGT
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Bigger injectors didnt fix it :(
  • From: "Rob Higgins" <rhiggins@cavva.com.au>
• Re: Bigger injectors didnt fix it :(
  • From: Len sabatine <sabatine@epix.net>
• Re: Bigger injectors didnt fix it :(
  • From: JTesta1966@aol.com
• Re: Bigger injectors didnt fix it / injector sizing
  • From: KasaRyan@aol.com
• Re: EGT
  • From: KasaRyan@aol.com
• Re: EGT
  • From: KasaRyan@aol.com
• Intro
  • From: Oliver Scholz <luke@dagobah.franken.de>
• Re: Bigger injectors didnt fix it / injector sizing
  • From: "Bruce Plecan" <nacelp@bright.net>
• Stumped at CSH, HQ
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Stumped at CSH, HQ
  • From: Bob Valentine <bob@tecmark.com>
• Re: Stumped at CSH, HQ
  • From: JTesta1966@aol.com
• Re: Stumped at CSH, HQ
  • From: JTesta1966@aol.com
• Re: Stumped at CSH, HQ
  • From: Len sabatine <sabatine@epix.net>
• Re: '165 switching both fans from the ECM?
  • From: Shannen Durphey <shannen@grolen.com>
• Another Intro
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: Got some new injectors! Best way to rescale?>
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: Got some new injectors! Best way to rescale?>
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Another Intro
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: GM Trip Computer
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: EGT
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Stumped at CSH, HQ
  • From: "Dave Zug" <dzug@delanet.com>
• UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850
  • From: olbap <olbap@mail.mia.bellsouth.net>
• RE: VSS Questions
  • From: "John D. Bachman" <jdbachman@redrose.net>
• RE: Stumped at CSH, HQ
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: VSS Questions
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: VSS Questions
  • From: John Bachman <jdbachman@redrose.net>
• RE: VSS Questions
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: GM Trip Computer
  • From: "Scott Feaver" <scott@j-body.com>
• Re: Stumped at CSH, HQ
  • From: Eric Clark <eclark@hoser.com>
• Low O2 readings in Diacom at WOT.... please help!
  • From: "Craig Marcho" <test@airmail.net>
• Re: Low O2 readings in Diacom at WOT.... please help!
  • From: "Bruce Plecan" <nacelp@bright.net>
• 749 for sale
  • From: cwagner@info2000.net
• When to swap injectors
  • From: "trax" <trax@frederickmd.com>
• RE: Low O2 readings in Diacom at WOT.... please help!
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Low O2 readings in Diacom at WOT.... please help!
  • From: "Craig Marcho" <test@airmail.net>
• RE: When to swap injectors
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: When to swap injectors
  • From: John_Calabrese@ENGELHARD.COM
• Re: Low O2 readings in Diacom at WOT.... please help!
  • From: rr <RRauscher@nni.com>
• Re: UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: Low O2 readings in Diacom at WOT.... please help!
  • From: "Jeff M" <tystorm@email.msn.com>
• Two barrel TBI must have a flaw, I give up.
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: UPDATE, Swapped to carb to rule out ignition.. and pseudo-intro..
  • From: Tedscj@aol.com
• Re: UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850
  • From: Tedscj@aol.com
• Re: UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: UPDATE, Swapped to carb to rule out ignition.. and pseudo-intro..
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: UPDATE, Swapped to carb to rule out ignition.. and pseudo-intro..
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Low O2 readings in Diacom at WOT.... please help!
  • From: Shannen Durphey <shannen@grolen.com>
• Re: UPDATE, Swapped to carb to rule out ignition.. and pseudo-intro..
  • From: Tedscj@aol.com
• Re: GM Trip Computer
  • From: "TK" <terryk@foothill.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: rr <RRauscher@nni.com>
• Fuel Trim Cell 18???
  • From: Jody Shapiro <jshapiro@netgate.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Got some new injectors! Best way to rescale?>
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: UPDATE, Swapped to carb to rule out ignition.. and pseudo-intro..
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Knock sensor woes
  • From: D Kunnath <djktno@engin.umich.edu>
• Subject: Re: UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850
  • From: "Marvin Johnson" <Wdnbtbldr@proaxis.com>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Low O2 readings in Diacom at WOT.... please help!
  • From: romans@starstream.net (Romans, Mark)
• Re: Knock sensor woes
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Got some new injectors! Best way to rescale?>
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: Bob Valentine <bob@tecmark.com>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: rr <RRauscher@nni.com>
• RE: UPDATE, Swapped to carb to rule out ignition.. and pseudo-int ro..
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Two barrel TBI must have a flaw, I give up
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: Fuel Trim Cell 18???
  • From: Glen Beard <gbeard1@nycap.rr.com>
• Re: Fuel Trim Cell 18???
  • From: Roger Heflin <rah@horizon.hit.net>
• Injector Duty Cycle
  • From: "trax" <trax@frederickmd.com>
• Re: Injector Duty Cycle
  • From: Ken Kelly <kenkelly@lucent.com>
• Re: GMECM Digest V2 #245
  • From: Mikepoore@aol.com
• Re: Two barrel TBI must have a flaw, I give up.
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: 749 for sale
  • From: Keith <kgil1@tampabay.rr.com>
• Injector flow
  • From: cwagner@info2000.net
• Re: GMECM Digest V2 #245
  • From: steve ravet <sravet@arm.com>
• Re: Knock sensor woes
  • From: "Programmer" <nwester@eidnet.org>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
• RE: Injector Duty Cycle
  • From: "trax" <trax@frederickmd.com>
• RE: Injector Duty Cycle
  • From: "J. T. Spilman" <jtstexas@home.com>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: Len Sabatine <sabatine@epix.net>
• TPI injectors for sale
  • From: Marc Piccioni <piccioni@cadvision.com>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: "Bruce Plecan" <nacelp@bright.net>
• References for Bosch Injection system and Direct injection system
  • From: SiregarAbdi@tpj.co.id
• References of Direct and indirect injection system for gasoline and diesel engine
  • From: SiregarAbdi@tpj.co.id
• Re: Two barrel TBI must have a flaw, I give up.
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Heat crazed mad scientist
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: Injector Duty Cycle
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Heat crazed mad scientist
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Injector Duty Cycle ... have data ... need advice
  • From: "TRAX" <trax@frederickmd.com>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: rr <RRauscher@nni.com>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: rr <RRauscher@nni.com>
• Re: Heat crazed mad scientist
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Injector Duty Cycle ... have data ... need advice
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Heat crazed mad scientist
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: Injector Duty Cycle
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Heat crazed mad scientist
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Heat crazed mad scientist
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Heat crazed mad scientist
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Injector Duty Cycle ... have data ... need advice
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Injector Duty Cycle
  • From: Ken Kelly <PCMdoc@surfree.com>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Injector Duty Cycle ... have data ... need advice
  • From: "TRAX" <trax@frederickmd.com>
• Re: Injector Duty Cycle ... have data ... need advice
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• mopar conversion.mpfi using gmecm
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: MdntRdr1@aol.com
• Re: Two barrel TBI must have a flaw, I give up.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Heat crazed mad scientist
  • From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
• IAT range
  • From: "Marc Ethier" <maethier@virtuel.collegebdeb.qc.ca>
• Re: IAT range
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: IAT range
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Heat crazed mad scientist
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: Len Sabatine <sabatine@epix.net>
• Re: Injector Duty Cycle
  • From: "Dave Zug." <dzug@delanet.com>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: IAT range
  • From: "Bruce Plecan" <nacelp@bright.net>
• That a joke
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: That a joke
  • From: MdntRdr1@aol.com
• RE: That a joke
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: That a joke
  • From: "Bruce Plecan" <nacelp@bright.net>
• 1998 4L60E & ECM
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: Two barrel TBI must have a flaw, I give up.
  • From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
• Re: IAT range
  • From: General Motors <a1227ecm@yahoo.com>
• Re: That a joke
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 1998 4L60E & ECM
  • From: KasaRyan@aol.com
• Re: That a joke
  • From: MdntRdr1@aol.com
• Re: That a joke
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: IAT range
  • From: "Marc Ethier" <maethier@virtuel.collegebdeb.qc.ca>
• Re: IAT range
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: IAT range
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: IAT range
  • From: Len Sabatine <sabatine@epix.net>
• Re: IAT range
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: IAT range
  • From: Len Sabatine <sabatine@epix.net>
• Re: IAT range
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Heat crazed mad scientist
  • From: "Programmer" <nwester@eidnet.org>
• Re: 1998 4L60E & ECM
  • From: "Programmer" <nwester@eidnet.org>
• Re: IAT range
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Heat crazed mad scientist
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Heat crazed mad scientist
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: Heat crazed mad scientist
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: IAT range
  • From: "Bruce Plecan" <nacelp@bright.net>
• Fw: gas
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: IAT range
  • From: "Marc Ethier" <maethier@virtuel.collegebdeb.qc.ca>
• Re: That a joke
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: IAT range
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Fw: gas
  • From: MdntRdr1@aol.com
• Re: That a joke
  • From: MdntRdr1@aol.com
• Re: IAT range
  • From: Sean879@aol.com
• Re: IAT range
  • From: "Marc Ethier" <maethier@virtuel.collegebdeb.qc.ca>
• Re: IAT range
  • From: "Bruce Plecan" <nacelp@bright.net>
• gas Grumpy rant
  • From: "Bruce Plecan" <nacelp@bright.net>
• 4.6L Ford MAF was Re: Heat crazed mad scientist
  • From: sswayze@bellsouth.net
• Re: gas Grumpy rant
  • From: MdntRdr1@aol.com
• Re: IAT range
  • From: Sean879@aol.com
• Re: gas Grumpy rant
  • From: MdntRdr1@aol.com
• Re: IAT range
  • From: "black maj" <blackmin@hotmail.com>
• Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: gas Grumpy rant
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: gas Grumpy rant
  • From: "TK" <terryk@foothill.net>
• Re: gas Grumpy rant
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: gas Grumpy rant
  • From: MdntRdr1@aol.com
• Re: gas Grumpy rant
  • From: "TK" <terryk@foothill.net>
• Re: Heat crazed mad scientist
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: gas Grumpy rant
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Heat crazed mad scientist
  • From: Shannen Durphey <shannen@grolen.com>
• Re: gas Grumpy rant
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: gas Grumpy rant
  • From: MdntRdr1@aol.com
• Re: gas Grumpy rant
  • From: Aaron G Kallotte <akallotte@juno.com>
• Re: gas Grumpy rant
  • From: "Bruce Plecan" <nacelp@bright.net>
• Mefi, Mefi, Mefi....
  • From: Shannen Durphey <shannen@grolen.com>
• Good Weekend
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: gas Grumpy rant
  • From: "Dave Zug" <dzug@delanet.com>
• Re: gas Grumpy rant
  • From: MdntRdr1@aol.com
• Re: Good Weekend
  • From: Aaron Willis <darkmonahue@awwwsome.com>
• Re: Good Weekend
  • From: Doug Dayson <djdayson@home.com>
• Re: Good Weekend
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Good Weekend
  • From: Doug Dayson <djdayson@home.com>
• Re: Good Weekend
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Good Weekend
  • From: Doug Dayson <djdayson@home.com>
• Re: Good Weekend
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Good Weekend
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: IAT range
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Good Weekend
  • From: Aaron Willis <darkmonahue@awwwsome.com>
• RE: Heat crazed mad scientist
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
  • From: "Programmer" <nwester@eidnet.org>
• RE: Heat crazed mad scientist
  • From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
• RE: Two barrel TBI must have a flaw, I give up.
  • From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
• RE: Good Weekend
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: Heat crazed mad scientist
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Someone was using CATS stuff?
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: 4.6L Ford MAF was Re: Heat crazed mad scientist
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Heat crazed mad scientist
  • From: John_Calabrese@ENGELHARD.COM
• RE: gas Grumpy rant
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Heat crazed mad scientist
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Heat crazed mad scientist
  • From: Gabe <gellett@earthlink.net>
• Re: Heat crazed mad scientist
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Heat crazed mad scientist
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• RE: Heat crazed mad scientist
  • From: John_Calabrese@ENGELHARD.COM
• Re: Two barrel TBI must have a flaw, I give up.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Heat crazed mad scientist
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Heat crazed mad scientist
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Heat crazed mad scientist
  • From: Len Sabatine <sabatine@epix.net>
• Re: Heat crazed mad scientist
  • From: John_Calabrese@ENGELHARD.COM
• RE: Someone was using CATS stuff?
  • From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
• 1997 Chev Chip Advice
  • From: "Jeffrey Scott" <jws6367@mailcity.com>
• Re: Someone was using CATS stuff?
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Someone was using CATS stuff?
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Heat crazed mad scientist
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Heat crazed mad scientist
  • From: "Bruce Plecan" <nacelp@bright.net>
• Electric Vehicle bragging (was Re: Heat...)
  • From: Steven Ciciora <ciciora@Ciciora.com>
• Re: Heat crazed mad scientist
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Someone was using CATS stuff?
  • From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
• Cruise control and 92EFI
  • From: Vinnie Moscaritolo <vinnie@vmeng.com>
• RE: Two barrel TBI must have a flaw, I give up.
  • From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
• Re: Someone was using CATS stuff?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Someone was using CATS stuff?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Heat crazed mad scientist
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Heat crazed mad scientist
  • From: "Dave Zug" <dzug@delanet.com>
• Re: wooden spacers
  • From: Hotrodderzzz@aol.com
• Re: Heat crazed mad scientist
  • From: "alexpeper" <alexpeper@email.msn.com>
• Rev Limiter on '87 Corvette
  • From: Aaron G Kallotte <akallotte@juno.com>
• Re: wooden spacers
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
  • From: Mike Wesley <mwesley@mediaone.net>
• Mad scientist VS. The info highway
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Rev Limiter on '87 Corvette
  • From: "TK" <terryk@foothill.net>
• Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
  • From: Mike Wesley <mwesley@mediaone.net>
• RE: Two barrel TBI must have a flaw, I give up.
  • From: "black maj" <blackmin@hotmail.com>
• RE: Mad scientist VS. The info highway
  • From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
• MAP Sensor Pinouts
  • From: Berg Family <rgberg@srv.net>
• RE: Mad scientist VS. The info highway
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: Rev Limiter on '87 Corvette
  • From: "Dave Zug" <dzug@delanet.com>
• Re: 4.6L Ford MAF
  • From: garwillis@msn.com (Garfield Willis)
• RE: ANLX-5474 update?YES
  • From: Mika.Helander@softbit.fi
• RE: 4.6L Ford MAF was Re: Heat crazed mad scientist
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: 4.6L Ford MAF was Re: Heat crazed mad scientist
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: 4.6L Ford MAF
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 4.6L Ford MAF
  • From: Mike Wesley <mwesley@mediaone.net>
• Re: wooden spacers
  • From: Hotrodderzzz@aol.com
• tpi intakes
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: wooden spacers
  • From: steve ravet <sravet@arm.com>
• Re: MAP Sensor Pinouts
  • From: steve ravet <sravet@arm.com>
• Re: wooden spacers
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• RE: Mad scientist VS. The info highway
  • From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
• Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
  • From: "NickG" <nikog@mediaone.net>
• Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
  • From: Mike Wesley <mwesley@mediaone.net>
• RE: 4.6L Ford MAF was Re: Heat crazed mad scientist
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Rev Limiter on '87 Corvette
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: wooden spacers
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Rev Limiter on '87 Corvette
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Rev Limiter on '87 Corvette
  • From: "Bruce Plecan" <nacelp@bright.net>
• PASSlock system bypass?
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: tpi intakes
  • From: "Bruce Plecan" <nacelp@bright.net>
• 1998 O2 sensor
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• RE: Rev Limiter on '87 Corvette
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Rev Limiter on '87 Corvette
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 1998 O2 sensor
  • From: "Bruce Plecan" <nacelp@bright.net>
• Microsoft Outlook 8.5 PROBLEMS
  • From: Orin <orin>
• [Admin] Plain Text Main only please
  • From: Orin <orin>
• Re: 1998 O2 sensor
  • From: Eric Clark <eclark@hoser.com>
• RE: tpi intakes
  • From: "Timothy Siford" <timsiford@frederickmd.com>
• FW: tpi intakes
  • From: "trax" <trax@frederickmd.com>
• RE: tpi intakes
  • From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
• Re: 1998 O2 sensor
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• RE: tpi intakes
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: Rev Limiter on '87 Corvette
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: 1997 Chev Chip Advice
  • From: "Programmer" <nwester@eidnet.org>
• RE: 1998 O2 sensor
  • From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
• RE: tpi intakes
  • From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
• Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
  • From: "Programmer" <nwester@eidnet.org>
• Re: tpi intakes
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Rev Limiter on '87 Corvette
  • From: Aaron G Kallotte <akallotte@juno.com>
• Re: tpi intakes
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: tpi intakes
  • From: "trax" <trax@frederickmd.com>
• Re: wooden spacers
  • From: Aaron Willis <darkmonahue@awwwsome.com>
• Re: 1998 O2 sensor
  • From: garwillis@msn.com (Garfield Willis)
• RE: 1998 O2 sensor
  • From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
• RE: wooden spacers
  • From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
• Re: 1998 O2 sensor
  • From: garwillis@msn.com (Garfield Willis)
• Re: [Admin] Plain Text Main only please
  • From: garwillis@msn.com (Garfield Willis)
• RE: tpi intakes
  • From: "J. T. Spilman" <jtstexas@home.com>
• Re: 1998 O2 sensor
  • From: Len Sabatine <sabatine@epix.net>
• Re: PASSlock system bypass?
  • From: Len Sabatine <sabatine@epix.net>
• Re: PASSlock system bypass?
  • From: Chipsbyal@aol.com
• Re: 1998 O2 sensor
  • From: garwillis@msn.com (Garfield Willis)
• Re: PASSlock system bypass?
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: PASSlock system bypass?
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• RE: wooden spacers
  • From: Aaron Willis <darkmonahue@awwwsome.com>
• Re: wooden spacers
  • From: MdntRdr1@aol.com
• Re: ANLX-5474 update?YES
  • From: Shannen Durphey <shannen@grolen.com>
• AFDY/6022 .bin in incoming
  • From: Shannen Durphey <shannen@grolen.com>
• RE: Rev Limiter on '87 Corvette
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• RE: Rev Limiter on '87 Corvette
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Lambda sensors - Where, Why and how Much ?
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: wooden spacers
  • From: steve ravet <sravet@arm.com>
• '84 Corvette .bin and/or ecu file needed
  • From: "Craig Marcho" <test@airmail.net>
• Re: '84 Corvette .bin and/or ecu file needed
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: Lambda sensors - Where, Why and how Much ?
  • From: Squash <realsquash@yahoo.com>
• Cruise control and 92EFI
  • From: Vinnie Moscaritolo <vinnie@vmeng.com>
• RE: Lambda sensors - Where, Why and how Much ?
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• RE: Cruise control and 92EFI
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Lambda sensors - Where, Why and how Much ?
  • From: KasaRyan@aol.com
• Pump Shot
  • From: "trax" <trax@frederickmd.com>
• Re: Pump Shot
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Pump Shot
  • From: "trax" <trax@frederickmd.com>
• RE: 4.6L Ford MAF was Re: Heat crazed mad scientist
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Cruise control and 92EFI
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: '84 Corvette .bin and/or ecu file needed
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Pump Shot
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Ford New mailing list
  • From: "Bruce Plecan" <nacelp@bright.net>
• 730 4 cyl wiring ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: wooden spacers
  • From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
• Re: wooden spacers
  • From: "Swayze" <kswayze@bellsouth.net>
• checksum error last byte
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: checksum error part two
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• RE: '84 Corvette .bin and/or ecu file needed
  • From: "Craig Marcho" <marcho@flash.net>
• [Admin] Someone has return-receipt on
  • From: Orin <orin>
• Re: PASSlock system bypass?
  • From: Chipsbyal@aol.com
• Re: '84 Corvette .bin and/or ecu file needed
  • From: Shannen Durphey <shannen@grolen.com>
• Re: checksum error part two
  • From: Shannen Durphey <shannen@grolen.com>
• Re: ODBD II ECM's in older cars?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: checksum error part two
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: Lambda sensors - Where, Why and how Much ?
  • From: "Edward J. Malkiewicz" <krazyed@worldnet.att.net>
• Re: Lambda sensors - Where, Why and how Much ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: PASSlock system bypass?
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• ODBD II ECM's in older cars?
  • From: Keith <kgil1@tampabay.rr.com>
• Re: ODBD II ECM's in older cars?
  • From: BBBDLGCON@aol.com
• Re: [Admin] Someone has return-receipt on
  • From: Orin <orin>
• Delco chip 16172718?
  • From: Daniel Henriksson <rotax@ludd.luth.se>
• 727 ECU limits
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: Pump Shot
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: ODBD II ECM's in older cars?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Lambda sensors - Where, Why and how Much ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: ODBD II ECM's in older cars?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 730 4 cyl wiring ?
  • From: Pat Ford <pford@qnx.com>
• Re: PASSlock system bypass?
  • From: Chipsbyal@aol.com
• Re: 727 ECU limits
  • From: ECMnut@aol.com
• RE: Pump Shot
  • From: Eric Bryant <BRYANTE@ghsp.com>
• Re: 727 ECU limits
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 727 ECU limits
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Lambda sensors - Where, Why and how Much ?
  • From: Squash <realsquash@yahoo.com>
• Re: ODBD II ECM's in older cars?
  • From: "TK" <terryk@foothill.net>
• Re: Lambda sensors - Where, Why and how Much ?
  • From: Len Sabatine <sabatine@epix.net>
• Re: Lambda sensors - Where, Why and how Much ?
  • From: Squash <realsquash@yahoo.com>
• RE: ODBD II ECM's in older cars?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: ODBD II ECM's in older cars?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Lambda sensors - Where, Why and how Much ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Lambda sensors - Where, Why and how Much ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Lambda sensors - Where, Why and how Much ?
  • From: Squash <realsquash@yahoo.com>
• Re: ODBD II ECM's in older cars?
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Lambda sensors - Where, Why and how Much ?
  • From: Eric Bryant <BRYANTE@ghsp.com>
• Re: krazy ed
  • From: KasaRyan@aol.com
• Re: 730 4 cyl wiring ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 727 ECU limits
  • From: KasaRyan@aol.com
• Re: Lambda sensors - Where, Why and how Much ?
  • From: Len Sabatine <sabatine@epix.net>
• Re: Lambda sensors - Where, Why and how Much ?
  • From: Len Sabatine <sabatine@epix.net>
• RE: Lambda sensors - Where, Why and how Much ?
  • From: Len Sabatine <sabatine@epix.net>
• FW: Lambda sensors - Where, Why and how Much ?
  • From: "Paul Murphy" <paul@vb.co.za>
• Re: Lambda sensors - Where, Why and how Much ?
  • From: garwillis@msn.com (Garfield Willis)
• Re: 727 ECU limits
  • From: Ludis Langens <ludis@cruzers.com>
• Odp: Lambda sensors - Where, Why and how Much ?
  • From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
• Re: GM Trip Computer
  • From: Ludis Langens <ludis@cruzers.com>
• RE: Pump Shot
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: 727 ECU limits
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: 727 ECU limits
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: 727 ECU limits
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: 727 ECU limits
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: 727 ECU limits
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 727 ECU limits
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Fuel Injector Connector - *the MALE side* ?
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: Pump Shot, now SU, no GMECM
  • From: Aaron Willis <darkmonahue@awwwsome.com>
• Re: Lambda sensors - Where, Why and how Much ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 727 ECU limits
  • From: ECMnut@aol.com
• Re: 727 ECU limits
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: 727 ECU limits
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• RE: Rev Limiter on '87 Corvette
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Memcal needed
  • From: Dan Kunnath <dank@noonetime.com>
• Re: Memcal needed
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: '84 Corvette .bin and/or ecu file needed
  • From: "Craig Marcho" <not_valid_email@airmail.net>
• ecm disassembly
  • From: cwagner@info2000.net
• turbo seca - maf>turbo
  • From: KasaRyan@aol.com
• ecm disassembly
  • From: "Paul Murphy" <paul@vb.co.za>
• Re: turbo seca - maf>turbo
  • From: "Bruce Plecan" <nacelp@bright.net>
• maf temps
  • From: KasaRyan@aol.com
• Re: turbo seca - maf>turbo
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Memcal needed "got one"
  • From: Chipsbyal@aol.com
• Re: turbo seca - maf>turbo
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: turbo seca - maf>turbo
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: turbo seca - maf>turbo
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: turbo seca - maf>turbo
  • From: JTesta1966@aol.com
• Re: turbo seca - maf>turbo
  • From: JTesta1966@aol.com
• Re: turbo seca - maf>turbo
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ecm disassembly
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: turbo seca - maf>turbo
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: turbo seca - maf>turbo
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: ecm disassembly
  • From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
• .bin request
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• List - up?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: List - up?
  • From: BBadMonkey@aol.com
• Re: List - up?
  • From: rr <RRauscher@nni.com>
• Can a header collector leak make the o2 readings innacurate?
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Can a header collector leak make the o2 readings innacurate?
  • From: rr <RRauscher@nni.com>
• Re: Can a header collector leak make the o2 readings innacurate?
  • From: Len Sabatine <sabatine@epix.net>
• Re: List - up?
  • From: Bob Valentine <bob@tecmark.com>
• Non EFI..Organ transplants..giving blood
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: ecm disassembly
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Idle Block Learn Cell ??
  • From: Squash <realsquash@yahoo.com>
• RE: Idle Block Learn Cell ??
  • From: "trax" <trax@frederickmd.com>
• RE: Idle Block Learn Cell ??
  • From: Squash <realsquash@yahoo.com>
• Re: Non EFI..Organ transplants..giving blood
  • From: "Bruce Plecan" <nacelp@bright.net>
• PCM and Trannies
  • From: "Bruce Plecan" <nacelp@bright.net>
• Min Cool for Closed Loop Fuel
  • From: "trax" <trax@frederickmd.com>
• Min Cool for CLF ...
  • From: "trax" <trax@frederickmd.com>
• Re: Min Cool for CLF ...
  • From: "Bruce Plecan" <nacelp@bright.net>
• PCM and Trannies
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: ecm disassembly
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Non EFI..Organ transplants..giving blood
  • From: "Programmer" <nwester@eidnet.org>
• Re: Can a header collector leak make the o2 readings innacurate?
  • From: "Gerald Pelnar" <wd0fyf@mpks.net>
• Re: Idle Block Learn Cell ??
  • From: rr <RRauscher@nni.com>
• '747 FL1&2 .ecu entries
  • From: rr <RRauscher@nni.com>
• Somewhat off topic: WTB: Old Laptop
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: Min Cool for Closed Loop Fuel
  • From: romans@starstream.net (Romans, Mark)
• Re: Somewhat off topic: WTB: Old Laptop
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ecm disassembly
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: ecm disassembly
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: Can a header collector leak make the o2 readings innacurate?
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Somewhat off topic: WTB: Old Laptop
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: Somewhat off topic: WTB: Old Laptop
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: Idle Block Learn Cell ??
  • From: Squash <realsquash@yahoo.com>
• Re: Idle Block Learn Cell ??
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??]
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Re: Idle Block Learn Cell ??
  • From: Squash <realsquash@yahoo.com>
• Re: Somewhat off topic: WTB: Old Laptop
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Can a header collector leak make the o2 readings innacurate?
  • From: Len Sabatine <sabatine@epix.net>
• Re: Can a header collector leak make the o2 readings innacurate?
  • From: Len Sabatine <sabatine@epix.net>
• Re: ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??]
  • From: Squash <realsquash@yahoo.com>
• RE: ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??]
  • From: "trax" <trax@frederickmd.com>
• Re: Somewhat off topic: WTB: Old Laptop
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: Idle Block Learn Cell ??
  • From: pcmdoc@surfree.com
• maf systems..
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Somewhat off topic: WTB: Old Laptop
  • From: Hotrodderzzz@aol.com
• Re: Somewhat off topic: WTB: Old Laptop
  • From: "cbrooks1 " <cbrooks1@mail.tqci.net>
• Re: Somewhat off topic: WTB: Old Laptop
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: Somewhat off topic: WTB: Old Laptop
  • From: Gabe <gellett@earthlink.net>
• Re: maf systems..
  • From: romans@starstream.net (Romans, Mark)
• Mustang stuff for sale/trade
  • From: steve ravet <sravet@arm.com>
• Re: Idle Block Learn Cell ??
  • From: Len Sabatine <sabatine@epix.net>
• RE: ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??]
  • From: Squash <realsquash@yahoo.com>
• RE: maf systems..
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: maf systems..
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Somewhat off topic: WTB: Old Laptop
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Somewhat off topic: WTB: Old Laptop
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: Can a header collector leak make the o2 readings innacurate? - YES!
  • From: KasaRyan@aol.com
• Re: Idle Block Learn Cell ??
  • From: Squash <realsquash@yahoo.com>
• Re: ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??]
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• RE: ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??]
  • From: "trax" <trax@frederickmd.com>
• General tuning question - fuel economy
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: General tuning question - fuel economy
  • From: JTesta1966@aol.com
• RE: General tuning question - fuel economy
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: General tuning question - fuel economy
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: General tuning question - fuel economy
  • From: Squash <realsquash@yahoo.com>
• BPW and Cylinder Vol.?
  • From: Squash <realsquash@yahoo.com>
• RE: ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??]
  • From: Squash <realsquash@yahoo.com>
• lb/hr calculation
  • From: "trax" <trax@frederickmd.com>
• Re: General tuning question - fuel economy
  • From: "Bruce Plecan" <nacelp@bright.net>
• Wide Band Oxygen Sensor - Request For Comments(Updated June 14 2000)
  • From: "Paul" <paul@vb.co.za>
• Re: BPW and Cylinder Vol.?
  • From: rr <RRauscher@nni.com>
• Re: lb/hr calculation
  • From: rr <RRauscher@nni.com>
• Re: Somewhat off topic: WTB: Old Laptop
  • From: Shannen Durphey <shannen@grolen.com>
• Fw: Kalmaker software
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: General tuning question - fuel economy
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: General tuning question - fuel economy
  • From: romans@starstream.net (Romans, Mark)
• Re: General tuning question - fuel economy
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: General tuning question - fuel economy
  • From: "Craig Marcho" <marcho@flash.net>
• Re: General tuning question - fuel economy
  • From: Marc Randolph <mrand@pobox.com>
• Wide Range OX sensor
  • From: bcroe@juno.com
• Re: Kalmaker software
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Any other GM comms speeds?
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Fw: Kalmaker software
  • From: Pat Ford <pford@qnx.com>
• Bosch (Leaded Fuel) 4 wire oxygen sensor PB-11
  • From: "Paul" <paul@vb.co.za>
• Re: BPW and Cylinder Vol.?
  • From: Squash <realsquash@yahoo.com>
• lb/hr calculation in ERROR (TunerCat vs. WinBin)
  • From: "trax" <trax@frederickmd.com>
• Re: lb/hr calculation in ERROR (TunerCat vs. WinBin)
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Re: lb/hr calculation in ERROR (TunerCat vs. WinBin)
  • From: Squash <realsquash@yahoo.com>
• RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
  • From: "trax" <trax@frederickmd.com>
• RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: BPW and Cylinder Vol.?
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: General tuning question - fuel economy
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: General tuning question - fuel economy
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
  • From: Eric Aos <EOA@spartek.com>
• RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Can an ECM "learn" how to start the car better?
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Can an ECM "learn" how to start the car better?
  • From: JTesta1966@aol.com
• Re: lb/hr calculation in ERROR (TunerCat vs. WinBin)
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Re: Can an ECM "learn" how to start the car better?
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Can an ECM "learn" how to start the car better?
  • From: "trax" <trax@frederickmd.com>
• Re: General tuning question - fuel economy
  • From: romans@starstream.net (Romans, Mark)
• RE: Can an ECM "learn" how to start the car better?
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: General tuning question - fuel economy
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Can an ECM "learn" how to start the car better?
  • From: "trax" <trax@frederickmd.com>
• RE: General tuning question - fuel economy
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: BPW and Cylinder Vol.?
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: BPW and Cylinder Vol.?
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: BPW and Cylinder Vol.?
  • From: Squash <realsquash@yahoo.com>
• Re: Can an ECM "learn" how to start the car better?
  • From: JTesta1966@aol.com
• Re: BPW and Cylinder Vol.?
  • From: Squash <realsquash@yahoo.com>
• Re: Can an ECM "learn" how to start the car better?
  • From: Len Sabatine <sabatine@epix.net>
• Re: BPW and Cylinder Vol.?
  • From: rrauscher@nni.com
• Re: Fw: Kalmaker software
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: lb/hr calculation in ERROR (TunerCat vs. WinBin)
  • From: rrauscher@nni.com
• 165 puzzling me again...
  • From: Mike Rolica <mrolica@meridian-mag.com>
• EGT gauges
  • From: Roger Heflin <rah@horizon.hit.net>
• RE: Can an ECM "learn" how to start the car better?
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Can an ECM "learn" how to start the car better?
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Can an ECM "learn" how to start the car better?
  • From: Len Sabatine <sabatine@epix.net>
• Re: EGT gauges
  • From: Len Sabatine <sabatine@epix.net>
• RE: Can an ECM "learn" how to start the car better?
  • From: "trax" <trax@frederickmd.com>
• Re: 165 puzzling me again...
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BPW and Cylinder Vol.?
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Can an ECM "learn" how to start the car better?
  • From: Squash <realsquash@yahoo.com>
• Re: 165 puzzling me again...
  • From: "alexpeper" <alexpeper@email.msn.com>
• winbin
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Can an ECM "learn" how to start the car better?
  • From: JTesta1966@aol.com
• RE: 165 puzzling me again...
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: 165 puzzling me again...
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: BPW and Cylinder Vol.?
  • From: rrauscher@nni.com
• RE: winbin
  • From: Eric Aos <EOA@spartek.com>
• Re: 165 puzzling me again...
  • From: Marc Randolph <mrand@pobox.com>
• RE: winbin
  • From: "trax" <trax@frederickmd.com>
• Re: winbin
  • From: Marc Randolph <mrand@pobox.com>
• RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
  • From: "trax" <trax@frederickmd.com>
• RE: winbin
  • From: Eric Aos <EOA@spartek.com>
• Re: EGT gauges
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: winbin
  • From: steve ravet <sravet@arm.com>
• BIG WinBin vs TunerCat discrepencies
  • From: "trax" <trax@frederickmd.com>
• Re: 165 puzzling me again...
  • From: rr <RRauscher@nni.com>
• Spark Advance discrepency somewhat figured out
  • From: "trax" <trax@frederickmd.com>
• Re: EGT gauges
  • From: Len Sabatine <sabatine@epix.net>
• RE: Spark Advance discrepency somewhat figured out
  • From: Eric Aos <EOA@spartek.com>
• off topic question?
  • From: Dave Evans <dave@lotuscarlton.demon.co.uk>
• RE: BIG WinBin vs TunerCat discrepencies
  • From: Eric Aos <EOA@spartek.com>
• Re: off topic question?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Diacom help
  • From: Steven Ciciora <ciciora@Ciciora.com>
• Re: BPW and Cylinder Vol.?
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Diacom help
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: winbin
  • From: "Mike Rolica" <97005620@lambton.on.ca>
• RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
  • From: "Mike Rolica" <97005620@lambton.on.ca>
• RE: BIG WinBin vs TunerCat discrepencies
  • From: "Mike Rolica" <97005620@lambton.on.ca>
• RE: BPW and Cylinder Vol.?
  • From: "Mike Rolica" <97005620@lambton.on.ca>
• Re: BPW and Cylinder Vol.?
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: lb/hr calculation in ERROR (TunerCat vs. WinBin)
  • From: rr <RRauscher@nni.com>
• Re: BPW and Cylinder Vol.?
  • From: rr <RRauscher@nni.com>
• Re: Spark Advance discrepency somewhat figured out
  • From: rr <RRauscher@nni.com>
• RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
  • From: cwagner@info2000.net
• RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
  • From: cwagner@info2000.net
• ALDL <--> PC interface
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Another .bin request
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: General tuning question - fuel economy
  • From: romans@starstream.net (Romans, Mark)
• Re: 165 puzzling me again...
  • From: romans@starstream.net (Romans, Mark)
• RE: Any other GM comms speeds?
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• RE: ALDL <--> PC interface
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: BPW and Cylinder Vol.?
  • From: Ludis Langens <ludis@cruzers.com>
• RE: ALDL <--> PC interface
  • From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
• Re: Any other GM comms speeds?
  • From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
• Re: Any other GM comms speeds?
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: Diacom help
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: EGT gauges
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• RE: Any other GM comms speeds?
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• WinBin vs TunerCat ... VE (fuel tables) ... Eric ...
  • From: "trax" <trax@frederickmd.com>
• Re: WinBin vs TunerCat ... VE (fuel tables) ... Eric ...
  • From: Squash <realsquash@yahoo.com>
• RE: WinBin vs TunerCat ... VE (fuel tables) ... Eric ...
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: BIG WinBin vs TunerCat discrepencies
  • From: Squash <realsquash@yahoo.com>
• RE: BPW and Cylinder Vol.?
  • From: Pat Ford <pford@qnx.com>
• Re: off topic question?
  • From: Aaron G Kallotte <akallotte@juno.com>
• Re: BPW and Cylinder Vol.?
  • From: Pat Ford <pford@qnx.com>
• Re: BIG WinBin vs TunerCat discrepencies
  • From: "Programmer" <nwester@eidnet.org>
• Diacom frame save?
  • From: Squash <realsquash@yahoo.com>
• RE: BPW and Cylinder Vol.?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: BIG WinBin vs TunerCat discrepencies
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: BIG WinBin vs TunerCat discrepencies
  • From: Squash <realsquash@yahoo.com>
• RE: BPW and Cylinder Vol.?
  • From: Pat Ford <pford@qnx.com>
• RE: BPW and Cylinder Vol.?
  • From: Steven Ciciora <ciciora@Ciciora.com>
• RE: Diacom frame save?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: BIG WinBin vs TunerCat discrepencies
  • From: Pat Ford <pford@qnx.com>
• Ludis, can I get info on your debug board
  • From: Pat Ford <pford@qnx.com>
• RE: Diacom frame save?
  • From: Squash <realsquash@yahoo.com>
• Re: BIG WinBin vs TunerCat discrepencies
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: BIG WinBin vs TunerCat discrepencies
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: BIG WinBin vs TunerCat discrepencies
  • From: "Bruce Plecan" <nacelp@bright.net>
• Changing 165 fuel delivery was "General tuning question - fuel ec onomy"
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Changing 165 fuel delivery was "General tuning question - fuel economy"
  • From: Rick Lindstedt <rick@mafb.org>
• RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: Any other GM comms speeds?
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• ECM part numbers?
  • From: steve ravet <sravet@arm.com>
• RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
  • From: Rick Lindstedt <rick@mafb.org>
• Vauxhall/Opel Broadcast codes.
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: Changing 165 fuel delivery was "General tuning question -fuel economy"
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
  • From: Squash <realsquash@yahoo.com>
• Re: ECM part numbers?
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: ECM part numbers?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: ECM part numbers?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Changing 165 fuel delivery was "General tuning question -fuel economy"
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Changing 165 fuel delivery was "General tuning question - fuel economy"
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Odp: Any other GM comms speeds?
  • From: "Marek" <elemark@priv4.onet.pl>
• Re: Ludis, can I get info on your debug board
  • From: Pat Ford <pford@qnx.com>
• Honda/NGK O2 sensor part # versus Horiba/NGK O2 sensor part #s
  • From: "Jason R. Haines" <jhaines@lingenfelter.com>
• Re: BPW and Cylinder Vol.?
  • From: Ludis Langens <ludis@cruzers.com>
• RE: Changing 165 fuel delivery was "General tuning question -fuel economy"
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Odp: Bosch (Leaded Fuel) 4 wire oxygen sensor PB-11
  • From: "Marek" <elemark@priv4.onet.pl>
• RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
  • From: Squash <realsquash@yahoo.com>
• Re: ECM part numbers?
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Changing 165 fuel delivery was "General tuning question - fuel economy"
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Ludis, can I get info on your debug board
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 727 ECU limits
  • From: Ludis Langens <ludis@cruzers.com>
• RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Changing 165 fuel delivery was "General tuning question - fuel economy"
  • From: "Bruce Plecan" <nacelp@bright.net>
• Update
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: ECM part numbers?
  • From: steve ravet <sravet@arm.com>
• Re: ECM part numbers?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Changing 165 fuel delivery was "General tuning question -fuel economy"
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ECM part numbers?
  • From: ECMnut@aol.com
• Changing 165 fuel delivery
  • From: romans@starstream.net (Romans, Mark)
• 727 RPM limit
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• 1226870/1227165 conversion
  • From: "Jeff Kopp" <jkopp@direcpc.com>
• Re: 1226870/1227165 conversion
  • From: rr <RRauscher@nni.com>
• Re: 1226870/1227165 conversion
  • From: romans@starstream.net (Romans, Mark)
• Re: 727 RPM limit
  • From: rr <RRauscher@nni.com>
• Re: 1226870/1227165 conversion
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• MAF use and calibration
  • From: "NickG" <nikog@mediaone.net>
• Re: ECM part numbers?
  • From: Keith <kgil1@tampabay.rr.com>
• RE: MAF use and calibration
  • From: "Mike Rolica" <97005620@lambton.on.ca>
• Re: Honda/NGK O2 sensor part # versus Horiba/NGK O2 sensor part #s
  • From: garwillis@msn.com (Garfield Willis)
• Re: Any other GM comms speeds?
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Vauxhall/Opel Broadcast codes.
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: ECM part numbers?
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 727 RPM limit
  • From: Ludis Langens <ludis@cruzers.com>
• Re: winbin
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Changing 165 fuel delivery
  • From: Aaron G Kallotte <akallotte@juno.com>
• Re: 1226870/1227165 conversion
  • From: "Jeff Kopp" <superchevyparts@mindspring.com>
• 730 ECM ..??
  • From: Rick Lindstedt <rick@mafb.org>
• RE: Any other GM comms speeds?
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: Any other GM comms speeds?
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Fw: Kalmaker software Long, and boring FWIW
  • From: "Bruce Plecan" <nacelp@bright.net>
• factory remanufactured... ?
  • From: Sean879@aol.com
• Wide Band O2 and tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• EPROM burning
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: factory remanufactured... ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM burning
  • From: "Bruce Plecan" <nacelp@bright.net>
• BIN uploaded
  • From: Squash <realsquash@yahoo.com>
• RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Bosch (Leaded Fuel) 4 wire oxygen sensor PB-11
  • From: "Bruce Plecan" <nacelp@bright.net>
• AXSH2423 differences
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: AXSH2423 differences
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: factory remanufactured... ?
  • From: Len Sabatine <sabatine@epix.net>
• Re: Improper DIY_EFI behaviour-or BS from the sidelines
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BIN uploaded
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 727 ECU limits
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: factory remanufactured... ?
  • From: Sean879@aol.com
• Fuel Filters
  • From: Squash <realsquash@yahoo.com>
• Re: factory remanufactured... ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BIN uploaded
  • From: Squash <realsquash@yahoo.com>
• Re: 727 ECU limits
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Improper DIY_EFI behaviour
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1226870/1227165 conversion
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Improper DIY_EFI behaviour
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Odp: Any other GM comms speeds?
  • From: "Marek" <elemark@priv4.onet.pl>
• MAP vs MAF FAQ
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1226870/1227165 conversion
  • From: "Jeff Kopp" <superchevyparts@mindspring.com>
• Re: MAP vs MAF FAQ
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Fw: MAP vs MAF FAQ
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: MAP vs MAF Discussion
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1226870/1227165 conversion
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Fuel Filters
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BIN uploaded
  • From: "Bruce Plecan" <nacelp@bright.net>
• GARFIELD IS WAY WAY OUT OF LINE RE: EGOR, oxygen sensor, O2 sensor, wide band oxygen sensor
  • From: "Paul" <paul@vb.co.za>
• Re: 727 ECU limits
  • From: "Bruce Plecan" <nacelp@bright.net>
• Paul vs Gar, please take off list.
  • From: Shannen Durphey <shannen@grolen.com>
• Re: BIN uploaded
  • From: KasaRyan@aol.com
• Re: Changing 165 fuel delivery
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BIN uploaded
  • From: KasaRyan@aol.com
• Re: BIN uploaded
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1226870/1227165 conversion
  • From: Bob Valentine <bob@tecmark.com>
• Holley 4barrel TBI, 700 cfm or 454 TB? Q's
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
  • From: KasaRyan@aol.com
• Re: ECM part numbers?
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: factory remanufactured... ?
  • From: Sean879@aol.com
• Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1226870/1227165 conversion
  • From: "Jeff Kopp" <jkopp@direcpc.com>
• Re: 727 ECU limits
  • From: rr <RRauscher@nni.com>
• Re: Truely sad news
  • From: Jason Weir <jweir@worldnet.att.net>
• Truely sad news
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Truely sad news
  • From: Kevin Crain <kevin@warpten.com>
• Enough about Gar
  • From: "Bruce Plecan" <nacelp@bright.net>
• You guys don't need to be warned do you?
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: EPROM burning
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: ECM part numbers?
  • From: ECMnut@aol.com
• Re: Truely sad news
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Changing 165 / Nother Q
  • From: "Dave Zug" <dzug@delanet.com>
• Re: MAF use and calibration
  • From: "Dave Zug" <dzug@delanet.com>
• RE: Truely sad news
  • From: Carl Summers <InTech@writeme.com>
• Info on Honda/NTK wide band oxygen sensors
  • From: "Paul" <paul@vb.co.za>
• Chrysler ROMs (But EFI!!)
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Truely sad news
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM burning
  • From: rr <RRauscher@nni.com>
• Re: Truely sad news
  • From: rr <RRauscher@nni.com>
• Re: MAF use and calibration
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM burning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM burning
  • From: Roger Heflin <rah@horizon.hit.net>
• Horiba/NTK and ECM/NTK [was Re: Info on Honda/NTK wide band oxygen sensors]
  • From: "Jason R. Haines" <jhaines@lingenfelter.com>
• Re: EPROM burning
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Talented DIYer EE needed
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1226870/1227165 conversion
  • From: romans@starstream.net (Romans, Mark)
• Re: Truely sad news
  • From: Ken Kelly <PCMdoc@surfree.com>
• Re: Changing 165 / Nother Q
  • From: romans@starstream.net (Romans, Mark)
• Re: Changing 165 / Nother Q
  • From: "Bruce Plecan" <nacelp@bright.net>
• TBI tuning headache
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Dwell meter on injectors
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
  • From: KasaRyan@aol.com
• Re: Truely sad news
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 1226870/1227165 conversion
  • From: Shannen Durphey <shannen@grolen.com>
• microcontrollers slightly more powerful than a pic?
  • From: Roger Heflin <rah@horizon.hit.net>
• Vortec FI
  • From: Tedscj@aol.com
• Re: Vortec FI
  • From: Chipsbyal@aol.com
• manifold spacers
  • From: Tedscj@aol.com
• Re: Vortec FI
  • From: Tedscj@aol.com
• Re: microcontrollers slightly more powerful than a pic?
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: Vortec FI
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: manifold spacers
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Vortec FI
  • From: "C. Brooks" <cbrooks1@tqci.net>
• Re: Dwell meter on injectors
  • From: "Bruce Plecan" <nacelp@bright.net>
• ECM Selection FAQ
  • From: "Bruce Plecan" <nacelp@bright.net>
• Abbrviations General EFI
  • From: "Bruce Plecan" <nacelp@bright.net>
• 808 Hac
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Vortec FI
  • From: Shannen@grolen.com
• EPROM identification
  • From: "Jeff Kopp" <jkopp@direcpc.com>
• Re: EPROM identification
  • From: Shannen Durphey <shannen@grolen.com>
• Re: EPROM identification
  • From: "Bruce Plecan" <nacelp@bright.net>
• manifold spacers
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: manifold spacers
  • From: Tedscj@aol.com
• Re: manifold spacers
  • From: Tedscj@aol.com
• Re: manifold spacers
  • From: Tedscj@aol.com
• Re: Vortec FI
  • From: gerhardr@yahoo.com
• '84 G-body with carbureted CCC
  • From: gerhardr@yahoo.com
• big block fi
  • From: "Mike" <itsmike@lvcm.com>
• Re: microcontrollers slightly more powerful than a pic?
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• LS1 Air Mass Meters
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Tweaking fueling values.
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Vortec FI... pictures
  • From: Shannen Durphey <shannen@grolen.com>
• Better suited for DIY_EFI??
  • From: Shannen Durphey <shannen@grolen.com>
• Re: '84 G-body with carbureted CCC
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: manifold spacers
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: manifold spacers
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: '84 G-body with carbureted CCC
  • From: Chipsbyal@aol.com
• Re: big block fi
  • From: Chipsbyal@aol.com
• Re: Abbrviations General EFI
  • From: "Bruce Plecan" <nacelp@bright.net>
• FAQ ideas
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Abbrviations General EFI
  • From: "wdhcrump" <dabney@dhcrump.com>
• Re: EPROM burning
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: Abbrviations General EFI
  • From: Chipsbyal@aol.com
• Re: big block fi
  • From: "Mike" <itsmike@lvcm.com>
• Re: FAQ ideas
  • From: Shannen Durphey <shannen@grolen.com>
• FAQ ideas
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: FAQ ideas
  • From: BBBDLGCON@aol.com
• Web sites
  • From: MdntRdr1@aol.com
• RE: '84 G-body with carbureted CCC
  • From: gerhardr@yahoo.com
• Re: '84 G-body with carbureted CCC
  • From: gerhardr@yahoo.com
• Re: Abbrviations General EFI
  • From: Ludis Langens <ludis@cruzers.com>
• Re: '84 G-body with carbureted CCC
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: LS1 Air Mass Meters
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ECM Selection FAQ
  • From: Pat Ford <pford@qnx.com>
• Re: Truely sad news
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: manifold spacers
  • From: Pat Ford <pford@qnx.com>
• Re: LS1 Air Mass Meters
  • From: Andrew Mattei <amattei@mindspring.com>
• DANGEROUS PRANK - NO EFI CONTENT
  • From: John_Calabrese@ENGELHARD.COM
• Re: FAQ ideas
  • From: Ernst denBroeder <edenbroe@cisco.com>
• RE: microcontrollers slightly more powerful than a pic?
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: microcontrollers slightly more powerful than a pic?
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: ECM Selection FAQ
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ECM Selection FAQ
  • From: Pat Ford <pford@qnx.com>
• Re: LS1 Air Mass Meters
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ECM Selection FAQ
  • From: "Bruce Plecan" <nacelp@bright.net>
• 165 Startup learning?
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: ECM Selection FAQ
  • From: Pat Ford <pford@qnx.com>
• Re: ECM Selection FAQ
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 165 Startup learning?
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: DANGEROUS PRANK - NO EFI CONTENT
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: 165 Startup learning?
  • From: romans@starstream.net (Romans, Mark)
• RE: DANGEROUS PRANK - NO EFI CONTENT
  • From: Roger Heflin <rah@horizon.hit.net>
• RE: microcontrollers slightly more powerful than a pic?
  • From: Eric Aos <EOA@spartek.com>
• Re: LS1 Air Mass Meters
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: FAQ ideas
  • From: Doug Dayson <djdayson@home.com>
• RE: DANGEROUS PRANK - NO EFI CONTENT
  • From: Dave Plummer <davepl@MICROSOFT.com>
• RE: DANGEROUS PRANK - NO EFI CONTENT
  • From: pcmdoc@surfree.com
• Re: ECM Selection FAQ
  • From: Pat Ford <pford@qnx.com>
• Re: ECM Selection FAQ
  • From: Ludis Langens <ludis@cruzers.com>
• RE: DANGEROUS PRANK - NO EFI CONTENT
  • From: Pat Ford <pford@qnx.com>
• Re: ECM Selection FAQ
  • From: Sean879@aol.com
• Re: DANGEROUS PRANK - NO EFI CONTENT
  • From: Scott Knight <scott@scottknight.com>
• 4 pin HEI interface ( I know it's old hat, Sorry)
  • From: "Marvin Johnson" <Wdnbtbldr@proaxis.com>
• RE: DANGEROUS PRANK - NO EFI CONTENT
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: ECM Selection FAQ
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• FAQ
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• BIN differences
  • From: "trax" <trax@frederickmd.com>
• RE: FAQ
  • From: "Parker, Mark" <MParker@levingston.com>
• Re: BIN differences
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: BIN differences
  • From: "Bruce Plecan" <nacelp@bright.net>
• FAQ
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: BIN differences
  • From: "trax" <trax@frederickmd.com>
• Re: FAQ
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: BIN differences (including howell730.bin)
  • From: Marc Randolph <mrand@pobox.com>
• Re: BIN differences
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• MAX232 chip is...
  • From: Eric Deslauriers <Eric.Deslauriers@oracle.com>
• RE: MAX232 chip is...
  • From: "Rodney Fulk" <elixir@pathwaynet.com>
• Re: MAX232 chip is...
  • From: Peter Gargano <peter@techedge.com.au>
• RE: MAX232 chip is...
  • From: Eric Aos <EOA@spartek.com>
• Re: MAX232 chip is...
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• This year's archives
  • From: Orin <orin>
• Re: Improper DIY_EFI behaviour-or BS from the sidelines
  • From: Orin <orin>
• Re: TPI Conversion?
  • From: "Robert Eickhorst" <rleickho@home.com>
• Re: This year's archives
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: J & L bodies, was ECM Selection FAQ
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: J & L bodies, was ECM Selection FAQ
  • From: Sean879@aol.com
• ECM # 16181333
  • From: "Peacock, Ken" <Ken.Peacock@attcanada.com>
• Re: ECM # 16181333
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ECM # 16181333
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: BIN differences
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ECM # 16181333
  • From: Len Sabatine <sabatine@epix.net>
• Re: 808 Hac
  • From: "black maj" <blackmin@hotmail.com>
• Re:Abbrviations General EFI
  • From: "Gerald Pelnar" <wd0fyf@mpks.net>
• Re: DANGEROUS PRANK - NO EFI CONTENT
  • From: "Dave Zug" <dzug@delanet.com>
• Re: BIN differences
  • From: "Dave Zug" <dzug@delanet.com>
• Back after needed break...tryna catch up
  • From: garwillis@msn.com (Garfield Willis)
• Re: '84 G-body with carbureted CCC
  • From: Ludis Langens <ludis@cruzers.com>
• Re: FAQ ideas
  • From: Ludis Langens <ludis@cruzers.com>
• Re: LS1 Air Mass Meters
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: LS1 Air Mass Meters
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: BIN differences
  • From: Ludis Langens <ludis@cruzers.com>
• Re: MAX232 chip is...
  • From: "John D. Bachman" <jdbachman@redrose.net>
• Re: ECM Selection FAQ
  • From: Todd Israels <israels@mnsi.net>
• RE: Changing 165 fuel delivery
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
  • From: Mike Rolica <mrolica@meridian-mag.com>
• 383 TBI
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Fw: Kalmaker software Long, and boring FWIW
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: BIN differences
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Changing 165 fuel delivery was "General tuning question - fuel economy"
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ECM # 16181333
  • From: Chipsbyal@aol.com
• Re: 383 TBI
  • From: KasaRyan@aol.com
• RE: Changing 165 fuel delivery was "General tuning
  • From: Shannen@grolen.com
• RE: Changing 165 fuel delivery
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Truely sad news
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Changing 165 / Nother Q
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Changing 165 / Nother Q
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Abbrviations General EFI
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: MAF Flowbench (was Changing 165 / Nother Q)
  • From: Andrew Mattei <amattei@mindspring.com>
• ? about forced induction
  • From: Aaron G Kallotte <akallotte@juno.com>
• Re: Abbrviations General EFI
  • From: JTesta1966@aol.com
• Re: MAF Flowbench (was Changing 165 / Nother Q)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ? about forced induction
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Changing 165 / Nother Q
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Truely sad news
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Web sites
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: LS1 Air Mass Meters
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: FAQ ideas
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: MAF Flowbench (was Changing 165 / Nother Q)
  • From: Eric Aos <EOA@spartek.com>
• RE: BIN differences
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: ? about forced induction
  • From: Aaron G Kallotte <akallotte@juno.com>
• Re: '84 G-body with carbureted CCC
  • From: gerhardr@yahoo.com
• RE: ? about forced induction
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: ? about forced induction
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ? about forced induction
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Changing 165 / Nother Q
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 383 TBI
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Kalmaker software Long, and boring FWIW
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Changing 165 fuel delivery was "General tuning question - fuel economy"
  • From: Shannen Durphey <shannen@grolen.com>
• Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy"
  • From: Shannen Durphey <shannen@grolen.com>
• Re: BIN differences
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Changing 165 / Nother Q
  • From: "Dave Zug" <dzug@delanet.com>
• Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy"
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Changing 165 fuel delivery
  • From: Shannen Durphey <shannen@grolen.com>
• .bin .ecu info
  • From: "black maj" <blackmin@hotmail.com>
• Re: FAQ ideas
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy"
  • From: Shannen Durphey <shannen@grolen.com>
• Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy"
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 383 TBI
  • From: MdntRdr1@aol.com
• Re: Changing 165 fuel delivery
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 383 TBI
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Changing 165 fuel delivery
  • From: garwillis@msn.com (Garfield Willis)
• Re: Back after needed break...tryna catch up
  • From: garwillis@msn.com (Garfield Willis)
• Re: 383 TBI
  • From: MdntRdr1@aol.com
• Re: 383 TBI
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: FAQ ideas
  • From: Bob Valentine <bob@tecmark.com>
• Re: Changing 165 fuel delivery
  • From: garwillis@msn.com (Garfield Willis)
• Re: Changing 165 fuel delivery
  • From: garwillis@msn.com (Garfield Willis)
• Re: Changing 165 fuel delivery
  • From: "Rob Higgins" <rhiggins@cavva.com.au>
• Dead EPROM programmer
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Abbrviations General EFI
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: 383 TBI
  • From: Shannen Durphey <shannen@grolen.com>
• Re: FAQ ideas and update on TPI 327 project
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: Changing 165 / Nother Q
  • From: "Dave Zug." <dzug@delanet.com>
• RE: Changing 165 / Nother Q
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: ECM # 16181333
  • From: Ken Kelly <PCMdoc@surfree.com>
• Re: 383 TBI
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: .bin .ecu info
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: FAQ ideas
  • From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
• Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy"
  • From: Brent Obermiller <ober_b@sssnet.com>
• Ground Loops (non aviation)
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: FAQ ideas
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: @#$@#$ Changing 165 fuel delivery was "General tuning questio n - fuel economy"
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• 1999 GMC 5.3 liter Vortec
  • From: "c y k" <ckyk@eudoramail.com>
• Re: bin uploaded
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 383 TBI -air cleaner size
  • From: KasaRyan@aol.com
• TBI pressure regulator mod
  • From: Eric Deslauriers <Eric.Deslauriers@oracle.com>
• Re: 383 TBI
  • From: KasaRyan@aol.com
• gm altenators...and efi
  • From: Mike Rolica <mrolica@meridian-mag.com>
• FW: gm altenators...and efi
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: gm altenators...and efi
  • From: Matt S Bower <m.s.bower@cummins.com>
• Re: gm altenators...and efi
  • From: Matt S Bower <m.s.bower@cummins.com>
• Re: gm altenators...and efi
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: gm altenators...and efi
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: gm altenators...and efi
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: gm altenators...and efi
  • From: rr <RRauscher@nni.com>
• Re: Changing 165 / Nother Q
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Changing 165 / Nother Q
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Changing 165 / Nother Q
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Changing 165 / Nother Q
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Changing 165 / Nother Q
  • From: "TRAX" <trax@frederickmd.com>
• bin uploaded
  • From: cwagner@info2000.net
• Re: mem-cal question
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: gm altenators...and efi
  • From: "Mike Rolica" <97005620@lambton.on.ca>
• mem-cal question
  • From: "TK" <terryk@foothill.net>
• Looking for a 16149396 ECM
  • From: "TK" <terryk@foothill.net>
• Re: mem-cal question
  • From: "TK" <terryk@foothill.net>
• Re: bin uploaded
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Basic Stamp 2 / ALDL?
  • From: Dan Gentry <dang@seanet.com>
• Re: TBI pressure regulator mod
  • From: "Bruce Plecan" <nacelp@bright.net>
• Fw: SOFTWARE LAWS
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Knock Sensor Question
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Fw: SOFTWARE LAWS
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Knock Sensor Question
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Dead EPROM programmer
  • From: "Rob Higgins" <rhiggins@cavva.com.au>
• Re: Knock Sensor Question
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: I tire of bruce plecans childish threats
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: bin uploaded
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: .bin .ecu info
  • From: "black maj" <blackmin@hotmail.com>
• Re: Knock Sensor Question
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Changing 165 / Nother Q
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: gm altenators...and efi
  • From: Ernst denBroeder <edenbroe@cisco.com>
• How to get the LV8?
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Dead EPROM programmer, and question
  • From: FieroMania@aol.com
• RE: How to get the LV8?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Dead EPROM programmer
  • From: Steven Ciciora <ciciora@Ciciora.com>
• RE: Dead EPROM programmer
  • From: Don.F.Broadus@ucm.com
• Re: Dead EPROM programmer, and question
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: gm altenators...and efi
  • From: "Jeff M" <tystorm@email.msn.com>
• RE: gm altenators...and efi
  • From: rrauscher@nni.com
• Re: gm altenators...and efi
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: gm altenators...and efi
  • From: "Jeff M" <tystorm@email.msn.com>
• Heated or not O2 sensor
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• RE: Heated or not O2 sensor
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 1999 GMC 5.3 liter Vortec -
  • From: KasaRyan@aol.com
• Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
  • From: KasaRyan@aol.com
• Re: Heated or not O2 sensor
  • From: KasaRyan@aol.com
• IGNORE - TEST
  • From: Eric Deslauriers <Eric.Deslauriers@oracle.com>
• Re: TBI pressure regulator mod
  • From: Eric Deslauriers <Eric.Deslauriers@oracle.com>
• Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Knock Sensor Question
  • From: "Craig Marcho" <not_valid_email@airmail.net>
• Re: Knock Sensor Question
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: Knock Sensor Question
  • From: D Kunnath <djktno@engin.umich.edu>
• Re: Fw: SOFTWARE LAWS
  • From: JTesta1966@aol.com
• Re: Knock Sensor Question
  • From: "Craig Marcho" <not_valid_email@airmail.net>
• RE: Knock Sensor Question
  • From: "Craig Marcho" <marcho@flash.net>
• Re: bin uploaded
  • From: cwagner@info2000.net
• Re: bin uploaded
  • From: cwagner@info2000.net
• I tire of bruce plecans childish threats
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: Knock Sensor Question
  • From: D Kunnath <djktno@engin.umich.edu>
• [Fwd: TBI pressure regulator mod]
  • From: Eric Deslauriers <Eric.Deslauriers@oracle.com>
• Mods to '85 GM TPI ECM
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: Knock Sensor Question
  • From: D Kunnath <djktno@engin.umich.edu>
• Re: I tire of bruce plecans JUST BE QUITE AND GO AWAY, PLEASE
  • From: "Jeff M" <tystorm@email.msn.com>
• Re: Mods to '85 GM TPI ECM
  • From: Shannen Durphey <shannen@grolen.com>
• Re: I tire of bruce plecans childish threats
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: Heated or not O2 sensor
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Heated or not O2 sensor
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: bin uploaded
  • From: Shannen Durphey <shannen@grolen.com>
• Re: I tire of bruce plecans childish threats
  • From: "Jeff Kopp" <jkopp@direcpc.com>
• RE: I tire of bruce plecans childish threats
  • From: "Craig Marcho" <marcho@flash.net>
• Re: Heated or not O2 sensor
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• RE: Mods to '85 GM TPI ECM
  • From: "Craig Marcho" <marcho@flash.net>
• Re: Mods to '85 GM TPI ECM
  • From: Chipsbyal@aol.com
• Re: Then ignore it
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Heated or not O2 sensor
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Mods to '85 GM TPI ECM
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: Mods to '85 GM TPI ECM
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: I tire of bruce plecans childish threats
  • From: Len Sabatine <sabatine@epix.net>
• Re: Mods to '85 GM TPI ECM
  • From: Shannen Durphey <shannen@grolen.com>
• Re: TBI pressure regulator mod
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: I tire of bruce plecans childish threats
  • From: ECMnut@aol.com
• Re: Heated or not O2 sensor
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: Mods to '85 GM TPI ECM
  • From: ECMnut@aol.com
• Re: Knock Sensor Question
  • From: Barry Tisdale <btisdale@cybersol.com>
• GM Authorized????
  • From: Shannen Durphey <shannen@grolen.com>
• Re: I tire of bruce plecans childish threats
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: Heated or not O2 sensor
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Just ignore it
  • From: romans@starstream.net (Romans, Mark)
• Re: GM Authorized????
  • From: romans@starstream.net (Romans, Mark)
• Re: Mods to '85 GM TPI ECM
  • From: romans@starstream.net (Romans, Mark)
• Re: I tire of bruce plecans childish threats- just a clarification
  • From: olbap <olbap@mail.mia.bellsouth.net>
• Re: testing O2 sensor
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: testing O2 sensor
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Finding TDC (sorry, a bit off topic)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Automotive Circuit Protection - Part 1
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: GM Authorized????
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Mods to '85 GM TPI ECM
  • From: Ludis Langens <ludis@cruzers.com>
• Re: testing O2 sensor
  • From: "Bruce Plecan" <nacelp@bright.net>
• TBI fuel Pumps
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Heated or not O2 sensor
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Knock Sensor Question
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: I tire of bruce plecan
  • From: garwillis@msn.com (Garfield Willis)
• Re: Mods to '85 GM TPI ECM
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Mods to '85 GM TPI ECM
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Just ignore it
  • From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
• Vendors Policies, Joke
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Dead EPROM programmer
  • From: Ludis Langens <ludis@cruzers.com>
• Re: GM Authorized????
  • From: JTesta1966@aol.com
• UBB forum, was Re: I tire
  • From: Ludis Langens <ludis@cruzers.com>
• Re: I tire of bruce plecans childish threats
  • From: DC Smith <morepoweral@tetranet.net>
• Re: Vendors Policies, Joke
  • From: "Bruce Plecan" <nacelp@bright.net>
• Interesting
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Mods to '85 GM TPI ECM
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: How to do 165 to 730
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Mods to '85 GM TPI ECM
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: I tire of bruce plecans childish threats
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Mods to '85 GM TPI ECM
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Heated or not O2 sensor
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Mods to '85 GM TPI ECM
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Finding TDC (sorry, a bit off topic)
  • From: "Bruce Plecan" <nacelp@bright.net>
• How to do 165 to 730
  • From: Aaron G Kallotte <akallotte@juno.com>
• Re: 1999 5.3 liter Vortec V-8
  • From: "Bruce Plecan" <nacelp@bright.net>
• A small victory
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: UBB forum, was Re: I tire
  • From: Peter Gargano <peter@techedge.com.au>
• Re: 1999 5.3 liter Vortec V-8
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: UBB forum, was Re: I tire
  • From: "Craig Marcho" <not_valid_email@airmail.net>
• Re: SD (was UBB forum, was Re: I tire
  • From: Andrew Mattei <amattei@mindspring.com>
• RE: How to do 165 to 730
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: I tire of bruce plecans childish threats- just a clarification
  • From: Pat Ford <pford@qnx.com>
• GN coil ebay auction
  • From: John_Calabrese@ENGELHARD.COM
• Re: UBB forum, was Re: I tire
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: Mods to '85 GM TPI ECM
  • From: "Bruce Plecan" <nacelp@bright.net>
• Archive idea
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: UBB forum, was Re: I tire
  • From: Len Sabatine <sabatine@epix.net>
• Re: 1999 5.3 liter Vortec V-8
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: TBI pressure regulator mod
  • From: "Bruce Plecan" <nacelp@bright.net>
• FOR SALE: LPE auction items on ebay
  • From: "Jason R. Haines" <jhaines@lingenfelter.com>
• testing O2 sensor
  • From: KasaRyan@aol.com
• RE: Automotive Circuit Protection - Part 1
  • From: Mike Rolica <mrolica@meridian-mag.com>
• eprom programers
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Finding TDC (sorry, a bit off topic)
  • From: Steven Ciciora <ciciora@Ciciora.com>
• Re: eprom programers
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: eprom programers
  • From: Roger Heflin <rah@horizon.hit.net>
• RE: testing O2 sensor
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Automotive Circuit Protection - Part 1
  • From: Roger Heflin <rah@horizon.hit.net>
• RE: Automotive Circuit Protection - Part 1
  • From: Eric Aos <EOA@spartek.com>
• Automotive Circuit Protection - Part 1
  • From: garwillis@msn.com (Garfield Willis)
• RE: Finding TDC (sorry, a bit off topic)
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Automotive Circuit Protection - Part 1
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: testing O2 sensor
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Automotive Circuit Protection - Part 1
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Mods to '85 GM TPI ECM
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: Automotive Circuit Protection - Part 1
  • From: garwillis@msn.com (Garfield Willis)
• Re: Mods to '85 GM TPI ECM
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: Mods to '85 GM TPI ECM
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: Mods to '85 GM TPI ECM
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: How to do 165 to 730
  • From: Bob Valentine <bob@tecmark.com>
• Re: Automotive Circuit Protection - Part 1
  • From: garwillis@msn.com (Garfield Willis)
• Re: Automotive Circuit Protection - Part 1
  • From: garwillis@msn.com (Garfield Willis)
• Re: Mods to '85 GM TPI ECM
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: How to do 165 to 730
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• RE: Vendors Policies, Joke
  • From: "Craig Marcho" <marcho@flash.net>
• Re: Vendors Policies, Joke
  • From: "C. Brooks" <cbrooks1@tqci.net>
• Automotive Circuit Protection - Part 2
  • From: garwillis@msn.com (Garfield Willis)
• Fuel Pressure Sensor
  • From: "Scott Flanagan" <flanaj@mindspring.com>
• Re: Automotive Circuit Protection - Part 1
  • From: Shannen Durphey <shannen@grolen.com>
• State/Federal Tax - was Re: Scoggin-Dickey
  • From: Peter Gargano <peter@techedge.com.au>
• Re: Mods to '85 GM TPI ECM
  • From: Shannen Durphey <shannen@grolen.com>
• Re: testing O2 sensor
  • From: Shannen Durphey <shannen@grolen.com>
• Re: eprom programers
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Mods to '85 GM TPI ECM
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Finding TDC (sorry, a bit off topic)
  • From: Chipsbyal@aol.com
• GM Wiper circuit question
  • From: Vinnie Moscaritolo <vinnie@vmeng.com>
• 1999 5.3 liter Vortec V-8
  • From: "hi 50" <ckyk@hotmail.com>
• Re: 1999 5.3 liter Vortec V-8
  • From: Chipsbyal@aol.com
• Re: 1999 5.3 liter Vortec V-8
  • From: Chipsbyal@aol.com
• Re: Mods to '85 GM TPI ECM
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: 1999 5.3 liter Vortec V-8
  • From: Len Sabatine <sabatine@epix.net>
• Re: Automotive Circuit Protection - Part 2
  • From: garwillis@msn.com (Garfield Willis)
• Re: 1999 5.3 liter Vortec V-8
  • From: "c y k" <ckyk@eudoramail.com>
• Re: Mods to '85 GM TPI ECM
  • From: garwillis@msn.com (Garfield Willis)
• Re: Finding TDC (sorry, a bit off topic)
  • From: "black maj" <blackmin@hotmail.com>
• Re: Mods to '85 GM TPI ECM
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: 1999 5.3 liter Vortec V-8
  • From: Chipsbyal@aol.com
• Re: Mods to '85 GM TPI ECM
  • From: garwillis@msn.com (Garfield Willis)
• Re: 1999 5.3 liter Vortec V-8
  • From: ECMnut@aol.com
• Re: Archive idea
  • From: "Bruce Plecan" <nacelp@bright.net>
• Archive idea
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: 1999 5.3 liter Vortec V-8
  • From: "Mike" <itsmike@lvcm.com>
• Re: 1999 5.3 liter Vortec V-8
  • From: Chipsbyal@aol.com
• Re: Archive idea
  • From: Peter Gargano <peter@techedge.com.au>
• Re: Archive idea
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Archive idea
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Archive idea
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Archive idea
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: State/Federal Tax - was Re: Scoggin-Dickey
  • From: "Dave Plummer" <davepl@MICROSOFT.com>
• RE: Archive idea
  • From: Eric Aos <EOA@spartek.com>
• RE: Archive idea
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: Mods to '85 GM TPI ECM
  • From: romans@starstream.net (Romans, Mark)
• Re: I tire of bruce plecan
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Archive idea
  • From: garwillis@msn.com (Garfield Willis)
• Re: Archive idea
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Re: Archive idea
  • From: "Kelly Parker" <bigblockfw@hotmail.com>
• Wide Range OX sensor
  • From: bcroe@juno.com
• Automotive Circuit Protection - Part 3
  • From: garwillis@msn.com (Garfield Willis)
• Re: 1999 5.3 liter Vortec V-8
  • From: "hi 50" <ckyk@hotmail.com>
• Re: Trials and tribulations
  • From: "Bruce Plecan" <nacelp@bright.net>
• 1999 5.3 liter Vortec V-8-B/S
  • From: "c y k" <ckyk@eudoramail.com>
• Re: 1999 5.3 liter Vortec V-8
  • From: "c y k" <ckyk@eudoramail.com>
• Trials and tribulations
  • From: rr <RRauscher@nni.com>
• Re: 1999 5.3 liter Vortec V-8
  • From: "c y k" <ckyk@eudoramail.com>
• Re: 1999 5.3 liter Vortec V-8
  • From: "c y k" <ckyk@eudoramail.com>
• Re: 1999 5.3 liter Vortec V-8-B/S
  • From: Len Sabatine <sabatine@epix.net>
• Re: Trials and tribulations
  • From: garwillis@msn.com (Garfield Willis)
• EFI ramblings
  • From: rr <RRauscher@nni.com>
• Re: EFI ramblings
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Trials and tribulations
  • From: rr <RRauscher@nni.com>
• Re: 1999 5.3 liter Vortec V-8
  • From: Chipsbyal@aol.com
• Re: EFI ramblings
  • From: rr <RRauscher@nni.com>
• Re: 1999 5.3 liter Vortec V-8
  • From: "c y k" <ckyk@eudoramail.com>
• Re: Mods to '85 GM TPI ECM
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: Trials and tribulations
  • From: garwillis@msn.com (Garfield Willis)
• Re: EFI ramblings
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Trials and tribulations
  • From: rr <RRauscher@nni.com>
• Re: EFI ramblings
  • From: rr <RRauscher@nni.com>
• Re: Mods to '85 GM TPI ECM
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Mods to '85 GM TPI ECM
  • From: romans@starstream.net (Romans, Mark)
• Re: Mods to '85 GM TPI ECM
  • From: "Bruce Plecan" <nacelp@bright.net>
• '151 from a turbo sunbird?
  • From: Tedscj@aol.com
• Re: '151 from a turbo sunbird?
  • From: Tedscj@aol.com
• Re: 1999 5.3 liter Vortec V-8
  • From: Chipsbyal@aol.com
• Re: 1999 5.3 liter Vortec V-8
  • From: "c y k" <ckyk@eudoramail.com>
• Re: 1999 5.3 liter Vortec V-8
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Programming 101
  • From: MdntRdr1@aol.com
• Re: Trials and tribulations
  • From: "Rob Higgins" <rhiggins@cavva.com.au>
• RE: GM Wiper circuit question
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: How to do 165 to 730
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Mods to '85 GM TPI ECM
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Mods to '85 GM TPI ECM
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Automotive Circuit Protection - Part 2
  • From: Pat Ford <pford@qnx.com>
• Re: State/Federal Tax - was Re: Scoggin-Dickey
  • From: Pat Ford <pford@qnx.com>
• Re: Automotive Circuit Protection - Part 2
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: Automotive Circuit Protection - Part 2
  • From: garwillis@msn.com (Garfield Willis)
• Re: Automotive Circuit Protection - Part 2
  • From: Pat Ford <pford@qnx.com>
• Re: Automotive Circuit Protection - Part 2
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Automotive Circuit Protection - Part 2
  • From: garwillis@msn.com (Garfield Willis)
• Interesting Diddy
  • From: "Bruce Plecan" <nacelp@bright.net>
• Strange ALDL Blather
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Strange ALDL Blather
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: FAQ ideas
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Automotive Circuit Protection - Part 2
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: FAQ ideas, shifting gears, fuel pump thingy, 1st reply, no efi of signifigance
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Strange ALDL Blather
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Ground Loops (non aviation)
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Battery jumping
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Strange ALDL Blather
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Strange ALDL Blather
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: Strange ALDL Blather
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Interesting Diddy
  • From: Len Sabatine <sabatine@epix.net>
• Re: Ground Loops (non aviation)
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Strange ALDL Blather
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: 1999 5.3 liter Vortec V-8
  • From: romans@starstream.net (Romans, Mark)
• Re: Strange ALDL Blather
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: Ground Loops (non aviation)
  • From: Jennifer Green & Scott Peitzsch <jlg-sep@mediaone.net>
• 730 vs 727 Question
  • From: romans@starstream.net (Romans, Mark)
• CSH required - Re: Battery jumping
  • From: Peter Gargano <peter@techedge.com.au>
• Re: 730 vs 727 Question
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Strange ALDL Blather
  • From: "Rodney Fulk" <elixir@pathwaynet.com>
• [ADMIN] Out of order messages
  • From: Orin <orin>
• RE: FAQ ideas
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Fw: SOFTWARE LAWS
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• RE: FAQ ideas, shifting gears, fuel pump thingy, 1st reply, no e fi of signifigance
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: FAQ ideas, shifting gears, fuel pump thingy, 1st reply, no e fi of signifigance
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 1999 5.3 liter Vortec V-8
  • From: "c y k" <ckyk@eudoramail.com>
• Re: 1999 5.3 liter Vortec V-8
  • From: "c y k" <ckyk@eudoramail.com>
• Re: Ground Loops (non aviation)
  • From: Pat Ford <pford@qnx.com>
• Re: Knock Sensor Question
  • From: Squash <realsquash@yahoo.com>
• TBI SPACER ?
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• RE: TBI SPACER ?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: TBI SPACER ?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: TBI SPACER ?
  • From: Chipsbyal@aol.com
• Re: I tire of bruce plecans childish threats- just a clarification
  • From: Orin <orin>
• Re: TBI SPACER ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Ground Loops (non aviation)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Benching a '165
  • From: Andrew Mattei <amattei@mindspring.com>
• Duty Cycle and VE ??
  • From: Squash <realsquash@yahoo.com>
• Re: How to do 165 to 730
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Benching a '165
  • From: Peter Gargano <peter@techedge.com.au>
• Re: .bin .ecu info
  • From: Peter Gargano <peter@techedge.com.au>
• Peugots using GM ECUs?
  • From: Peter Gargano <peter@techedge.com.au>
• Re: Duty Cycle and VE ??
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Duty Cycle and VE ??
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: 1999 5.3 liter Vortec V-8
  • From: "Programmer" <nwester@eidnet.org>
• Re: big block fi
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: I tire of bruce plecans childish threats- just a clarification
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: How to do 165 to 730
  • From: romans@starstream.net (Romans, Mark)
• Re: How to do 165 to 730
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Benching a '165
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: BPW and Cylinder Vol.?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: How to do 165 to 730
  • From: romans@starstream.net (Romans, Mark)
• Re: BPW and Cylinder Vol.?
  • From: romans@starstream.net (Romans, Mark)
• Re: How to do 165 to 730
  • From: Shannen Durphey <shannen@grolen.com>
• Re: How to do 165 to 730
  • From: Shannen Durphey <shannen@grolen.com>
• Re: How to do 165 to 730
  • From: "Bruce Plecan" <nacelp@bright.net>
• Miss under pressure....
  • From: Shannen Durphey <shannen@grolen.com>
• Re: How to do 165 to 730
  • From: romans@starstream.net (Romans, Mark)
• Re: BPW and Cylinder Vol.?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: How to do 165 to 730
  • From: romans@starstream.net (Romans, Mark)
• Re: BPW and Cylinder Vol.?
  • From: romans@starstream.net (Romans, Mark)
• Re: Miss under pressure....
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Peugots using GM ECUs?
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Quick OBD-II question, I think
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Miss under pressure....
  • From: Len Sabatine <sabatine@epix.net>
• Re: Quick OBD-II question, I think
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: BPW and Cylinder Vol.?
  • From: Squash <realsquash@yahoo.com>
• Re: Duty Cycle and VE ??
  • From: Squash <realsquash@yahoo.com>
• Re: Quick OBD-II question, I think
  • From: Len Sabatine <sabatine@epix.net>
• Re: Miss under pressure....
  • From: JTesta1966@aol.com
• RE: Quick OBD-II question, I think
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: BPW and Cylinder Vol.?
  • From: rrauscher@nni.com
• RE: Quick OBD-II question, I think
  • From: Len Sabatine <sabatine@epix.net>
• Re: 1998 O2 sensor
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: 1999 5.3 liter Vortec V-8
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: BPW and Cylinder Vol.?
  • From: "Bruce Plecan" <nacelp@bright.net>
• TC lockup problems
  • From: "TRAX" <trax@frederickmd.com>
• 305 vs. 350 TPI 730 EPROMs
  • From: "TRAX" <trax@frederickmd.com>
• Re: TC lockup problems
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: TC lockup problems
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: TC lockup problems
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: TC lockup problems
  • From: Rick Lindstedt <rick@mafb.org>
• Re: TC lockup problems
  • From: Roger Heflin <rah@horizon.hit.net>
• RE: TC lockup problems
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 305 vs. 350 TPI 730 EPROMs
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BPW and Cylinder Vol.?
  • From: rr <RRauscher@nni.com>
• Re: 305 vs. 350 TPI 730 EPROMs
  • From: rr <RRauscher@nni.com>
• RE: TC lockup problems
  • From: "TRAX" <trax@frederickmd.com>
• Re: TC lockup problems
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EGOR Pricing Announcement (Commercial)
  • From: Steven Ciciora <ciciora@Ciciora.com>
• Re: Technical Questions
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• RE: EGOR Pricing Announcement (Commercial)
  • From: "Jason Bonie" <gmecmml@cfl.rr.com>
• EGOR Pricing Announcement (Commercial)
  • From: garwillis@msn.com (Garfield Willis)
• Re: Technical Questions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BPW and Cylinder Vol.?
  • From: garwillis@msn.com (Garfield Willis)
• Re: TC lockup problems
  • From: bcroe@juno.com
• RE: TC lockup problems
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: EGOR Pricing Announcement (Commercial)
  • From: garwillis@msn.com (Garfield Willis)
• Re: BPW and Cylinder Vol.?
  • From: Shannen Durphey <shannen@grolen.com>
• 89 memcal chip#'s, the other ones...
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 89 memcal chip#'s, the other ones...
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Quick OBD-II question, I think
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: 1998 O2 sensor
  • From: Len Sabatine <sabatine@epix.net>
• How to read the anht_hac...
  • From: "TRAX" <trax@frederickmd.com>
• Closed loop tuning
  • From: rr <RRauscher@nni.com>
• EFIinfo.doc
  • From: "Bruce Plecan" <nacelp@bright.net>
• GM Performance EPROMS
  • From: "TRAX" <trax@frederickmd.com>
• Re: Miss under pressure....
  • From: Shannen Durphey <shannen@grolen.com>
• Tailpipe Probing of EGO
  • From: garwillis@msn.com (Garfield Willis)
• web site help
  • From: "Jeffery Green" <jlg@bellsouth.net>
• Re: GM Performance EPROMS
  • From: "Bruce Plecan" <nacelp@bright.net>
• Test - Ignore
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: How to read the anht_hac...
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: web site help
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Closed loop tuning
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: 1998 O2 sensor
  • From: garwillis@msn.com (Garfield Willis)
• Re: How to read the anht_hac...
  • From: Marc Randolph <mrand@pobox.com>
• Re: 89 memcal chip#'s, the other ones...
  • From: Ludis Langens <ludis@cruzers.com>
• Re: How to read the anht_hac...
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Technical Questions
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Technical Questions
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 89 memcal chip#'s, the other ones...
  • From: Shannen Durphey <shannen@grolen.com>
• RE: TC lockup problems
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: EGOR Pricing Announcement (Commercial)
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: EGOR Pricing Announcement (Commercial)
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Tailpipe Probing of EGO
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 89 memcal chip#'s, the other ones...
  • From: "Wayne Johnson" <waynejohnson007@hotmail.com>
• Newbie seeking advise
  • From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
• Re: 1998 O2 sensor
  • From: David Cooley <n5xmt@bellsouth.net>
• Seeking an '808 '165 hack
  • From: "black maj" <blackmin@hotmail.com>
• Re: BPW and Cylinder Vol.?
  • From: Squash <realsquash@yahoo.com>
• Re: Seeking an '808 '165 hack
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BPW and Cylinder Vol.?
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: BPW and Cylinder Vol.?
  • From: Squash <realsquash@yahoo.com>
• Re: BPW and Cylinder Vol.?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BPW and Cylinder Vol.?
  • From: Squash <realsquash@yahoo.com>
• Re: BPW and Cylinder Vol.?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BPW and Cylinder Vol.?
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: BPW and Cylinder Vol.?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Speed Density ECM
  • From: Eric Norgard <eric@aztek-eng.com>
• Re: Newbie seeking advise
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BPW and Cylinder Vol.?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BPW and Cylinder Vol.?
  • From: Squash <realsquash@yahoo.com>
• Re: BPW and Cylinder Vol.?
  • From: Squash <realsquash@yahoo.com>
• Re: BPW and Cylinder Vol.?
  • From: rrauscher@nni.com
• Re: EGOR Pricing Announcement (Commercial)
  • From: garwillis@msn.com (Garfield Willis)
• Re: EGOR Pricing Announcement (Commercial)
  • From: garwillis@msn.com (Garfield Willis)
• Re: Tailpipe Probing of EGO
  • From: garwillis@msn.com (Garfield Willis)
• Anyone know anything about negotiating severance packages?
  • From: "Kevin R" <KEReyn@gte.net>
• sending ecms
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1998 O2 sensor
  • From: garwillis@msn.com (Garfield Willis)
• intake robbery - was Re: Tailpipe Probing of EGO
  • From: Peter Gargano <peter@ntserver.techedge.com.au>
• Re: intake robbery - was Re: Tailpipe Probing of EGO
  • From: "Bruce Plecan" <nacelp@bright.net>
• How to send
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1999 5.3 liter Vortec V-8
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: Newbie seeking advise
  • From: BBadMonkey@aol.com
• Re: Newbie seeking advise
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Tailpipe Probing of EGO
  • From: "alexpeper" <alexpeper@email.msn.com>
• I was invited to, min EFI content
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1998 O2 sensor
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: TC lockup problems - 305 spark
  • From: KasaRyan@aol.com
• Re: 1998 O2 sensor
  • From: David Cooley <n5xmt@bellsouth.net>
• Re: I was invited to, min EFI content
  • From: Tedscj@aol.com
• EBAY tidbit
  • From: Tedscj@aol.com
• Re: Newbie seeking advise
  • From: Len Sabatine <sabatine@epix.net>
• Mystery .bin at incoming
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 89 memcal chip#'s, the other ones...
  • From: Shannen Durphey <shannen@grolen.com>
• Update from CSH, HQ No EFI Why Grumpy
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Newbie seeking advise
  • From: Shannen Durphey <shannen@grolen.com>
• AKSN1175
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Speed Density ECM
  • From: "TK" <terryk@foothill.net>
• Re: Newbie seeking advise
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: How to send
  • From: rr <RRauscher@nni.com>
• Re: I was invited to, min EFI content
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1999 5.3 liter Vortec V-8
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: Tailpipe Probing of EGO
  • From: garwillis@msn.com (Garfield Willis)
• Re: How to send
  • From: "Bruce Plecan" <nacelp@bright.net>
• 400 RPM Diacom
  • From: Squash <realsquash@yahoo.com>
• Re: BPW and Cylinder Vol.?
  • From: Squash <realsquash@yahoo.com>
• OFF-LIST: Non-efi question
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: OFF-LIST: Non-efi question
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• 749 question -
  • From: Barry Tisdale <btisdale@cybersol.com>
• source for bins
  • From: Aaron G Kallotte <akallotte@juno.com>
• Re: 749 question -
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: TBI SPACER ?
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Electric Air Pump wanted
  • From: terry_kelley@hp.com
• Re: Electric Air Pump wanted
  • From: Andrew Mattei <amattei@mindspring.com>
• RE: TBI SPACER ?
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: OFF-LIST: Non-efi question
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: OFF-LIST: Non-efi question
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: OFF-LIST: Non-efi question
  • From: Peter Gargano <peter@techedge.com.au>
• Re: source for bins
  • From: Shannen Durphey <shannen@grolen.com>
• ECM's MAF or MAP
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: OFF-LIST: Non-efi question
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: source for bins
  • From: Aaron G Kallotte <akallotte@juno.com>
• Re: ECM's MAF or MAP
  • From: "Bruce Plecan" <nacelp@bright.net>
• 16198267 ID?
  • From: "Jon Fedock" <Galadar@worldnet.att.net>
• Re: source for bins
  • From: Shannen Durphey <shannen@grolen.com>
• Supercharger: MAF or MAP?
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: 16198267 ID?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: OFF-LIST: Non-efi question
  • From: Peter Gargano <peter@techedge.com.au>
• Re: EFIinfo.doc
  • From: Brian L Massey <blocklm@juno.com>
• VSS question (off topic)
  • From: "Jeffery Green" <jlg@bellsouth.net>
• Vortec 8 bolt to 12 bolt conversion
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: ECM's MAF or MAP
  • From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
• Re: Vortec 8 bolt to 12 bolt conversion
  • From: Shannen Durphey <shannen@grolen.com>
• Re: larifying info: Vortec 8 bolt to 12 bolt conversion
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Vortec 8 bolt to 12 bolt conversion
  • From: "Mike" <itsmike@lvcm.com>
• Re: Vortec 8 bolt to 12 bolt conversion
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 749 question -
  • From: "Green" <green@nlenx.com>
• Re: OFF-LIST: Non-efi question
  • From: Peter Gargano <peter@techedge.com.au>
• New Definition Update
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Vortec 8 bolt to 12 bolt conversion
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: OFF-LIST: Non-efi question
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: New Definition Update
  • From: "black maj" <blackmin@hotmail.com>
• Q-Jet sec size
  • From: rr <RRauscher@nni.com>
• Re: New Definition Update
  • From: rr <RRauscher@nni.com>
• Re: New Definition Update
  • From: rr <RRauscher@nni.com>
• RE: OFF-LIST: Non-efi question
  • From: "Mike Rolica" <97005620@lambton.on.ca>
• RE: OFF-LIST: Non-efi question
  • From: "Mike Rolica" <97005620@lambton.on.ca>
• Re: How to send
  • From: Orin <orin>
• Re: Q-Jet sec size
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 16198267 ID?
  • From: "Jon Fedock" <Galadar@worldnet.att.net>
• Re: Speed Density ECM
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Q-Jet sec size
  • From: bcroe@juno.com
• Re: Q-Jet sec size
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: Q-Jet sec size
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 749 Question
  • From: Dig <turbodig@yahoo.com>
• ECM interchangability?
  • From: Daniel Houlton <houlster@user1.inficad.com>
• Re: Speed Density ECM
  • From: "TK" <terryk@foothill.net>
• Re: New Definition Update
  • From: General Motors <a1227ecm@yahoo.com>
• Re: ECM interchangability on a DOHC
  • From: "TK" <terryk@foothill.net>
• Re: ECM interchangability?
  • From: Chipsbyal@aol.com
• New email...
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: ECM interchangability?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Propane EFI
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: OFF-LIST: Non-efi question
  • From: "Kevin R" <KEReyn@gte.net>
• Re: Q-Jet sec size
  • From: bearbvd@cmn.net (Greg Hermann)
• Format of WinBin .ECU file - tutorial/help page?
  • From: Peter Gargano <peter@techedge.com.au>
• Ambidextrous software
  • From: Ludis Langens <ludis@cruzers.com>
• Re: ECM interchangability?
  • From: Ludis Langens <ludis@cruzers.com>
• 8192 baud 1227808 project.
  • From: Peter Gargano <peter@techedge.com.au>
• Re: Q-Jet sec size
  • From: rr <RRauscher@nni.com>
• Re: Q-Jet sec size
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 8192 baud 1227808 project.
  • From: "Bruce Plecan" <nacelp@bright.net>
• On The Fly Tuning (OTFT) - was Re: 8192 baud 1227808 project.
  • From: Peter Gargano <peter@techedge.com.au>
• Re: On The Fly Tuning (OTFT) - was Re: 8192 baud 1227808 project.
  • From: "Bruce Plecan" <nacelp@bright.net>
• ECM for sale..
  • From: Marc Piccioni <piccioni@cadvision.com>
• Re: Format of WinBin .ECU file - tutorial/help page?
  • From: "Programmer" <nwester@eidnet.org>
• RE: I tire of bruce plecans childish threats
  • From: Carl Summers <InTech@writeme.com>
• Re: Ambidextrous software
  • From: thergen@svn.net
• Vortec Problem #2
  • From: Brent Obermiller <ober_b@sssnet.com>
• bad .bin on FTP server
  • From: "NickG" <nikog@mediaone.net>
• RE: Vortec Problem #2
  • From: Carl Summers <InTech@writeme.com>
• Re: On The Fly Tuning (OTFT)
  • From: GM injection <turboalfa@excite.com>
• Re: bad .bin on FTP server
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Vortec Problem #2
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: On The Fly Tuning (OTFT)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Q-Jet sec size
  • From: rr <RRauscher@nni.com>
• PCM's measuring torque.
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Crankshaft sensor
  • From: "K.E. Towle" <karljiml@compuserve.com>
• BINs needed
  • From: "K.E. Towle" <karljiml@compuserve.com>
• Re: Miss under pressure....
  • From: Rodney Davis <rodldavis@home.com>
• MAF BLM based tuning
  • From: "Dave Zug" <dzug@delanet.com>
• MAF BLM based tuning
  • From: "Dave Zug" <dzug@delanet.com>
• Re: PCM's measuring torque.
  • From: "Dave Zug" <dzug@delanet.com>
• Re: PCM's measuring torque.
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Q-Jet sec size
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Miss under pressure....
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Crankshaft sensor
  • From: Shannen Durphey <shannen@grolen.com>
• Re: PCM's measuring torque.
  • From: Shannen Durphey <shannen@grolen.com>
• RE: Crankshaft sensor
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: PCM's measuring torque.
  • From: bcroe@juno.com
• Re: PCM's measuring torque.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Crankshaft sensor
  • From: "Bruce Plecan" <nacelp@bright.net>
• PI closed loop algorithm for 1227747 ECU?
  • From: Scott Lundahl <scott@lumenetics.com>
• Re: I tire of bruce plecans childish threats
  • From: "Programmer" <nwester@eidnet.org>
• Re: bad .bins on FTP server
  • From: "NickG" <nikog@mediaone.net>
• persnickety '747s
  • From: rr <RRauscher@nni.com>
• Re: MAF BLM based tuning
  • From: rr <RRauscher@nni.com>
• Re: Q-Jet sec size
  • From: rr <RRauscher@nni.com>
• Re: bad .bins on FTP server
  • From: Kevin Crain <kevin@warpten.com>
• Re: PI closed loop algorithm for 1227747 ECU?
  • From: rr <RRauscher@nni.com>
• LS1 Hack?
  • From: "Dave & Irina Eicher" <sailors@mwci.net>
• Re: PCM's measuring torque.
  • From: David Cooley <n5xmt@triad.rr.com>
• ECM for forced induction
  • From: "C. Brooks" <cbrooks1@tqci.net>
• Re: bad .bins on FTP server
  • From: Shannen Durphey <shannen@grolen.com>
• Re: PCM's measuring torque.
  • From: Len Sabatine <sabatine@epix.net>
• Re: Q-Jet sec size
  • From: Laderjg@aol.com
• Re: ECM for forced induction
  • From: Shannen Durphey <shannen@grolen.com>
• Re: A little vague...ECM for forced induction
  • From: Shannen Durphey <shannen@grolen.com>
• Re: A little vague...ECM for forced induction
  • From: "Bruce Plecan" <nacelp@bright.net>
• Broken timing gear
  • From: BBBDLGCON@aol.com
• '870 to '165 swap.....
  • From: "Craig Marcho" <marcho@flash.net>
• Re: Broken timing gear
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: bad .bin on FTP server
  • From: steve ravet <sravet@arm.com>
• Bench tests needed...
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Bench tests needed...
  • From: Ludis Langens <ludis@cruzers.com>
• GM Efi to Rover 3.5
  • From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
• RE: ECM for forced induction
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: Bench tests needed...
  • From: Shannen Durphey <shannen@grolen.com>
• Re: PI closed loop algorithm for 1227747 ECU?
  • From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
• Re: GM Efi to Rover 3.5
  • From: Ludis Langens <ludis@cruzers.com>
• Re: ECM for forced induction
  • From: Ludis Langens <ludis@cruzers.com>
• RE: ECM for forced induction
  • From: "cbrooks1 " <cbrooks1@mail.tqci.net>
• Re: PCM's measuring torque.
  • From: "Jason R. Haines" <jhaines@lingenfelter.com>
• FOR SALE: misc. calibration parts and a modified GM ECM on ebay
  • From: "Jason R. Haines" <jhaines@lingenfelter.com>
• RE: ECM for forced induction
  • From: "Jeffrey Scott" <jws6367@mailcity.com>
• 730 Memcal was... RE: MAF BLM based tuning
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• ECM info sought...
  • From: Oliver Scholz <luke@dagobah.franken.de>
• 165 Main spark table
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: PCM's measuring torque.
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Broken timing gear
  • From: KasaRyan@aol.com
• Re: MAF BLM based tuning
  • From: "Dave Zug." <dzug@delanet.com>
• Re: 165 Main spark table
  • From: "Dave Zug." <dzug@delanet.com>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ECM info sought...
  • From: steve ravet <sravet@arm.com>
• Re: Bench tests needed...
  • From: Ludis Langens <ludis@cruzers.com>
• Re: bad .bin on FTP server
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: '870 to '165 swap.....
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: PI closed loop algorithm for 1227747 ECU?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Ha, '747 anti-flood
  • From: rr <RRauscher@nni.com>
• Re: bad .bin on FTP server
  • From: steve ravet <sravet@arm.com>
• Re: 730 Memcal was... RE: MAF BLM based tuning
  • From: Bob Valentine <bob@tecmark.com>
• Re: 730 Memcal was... RE: MAF BLM based tuning
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: Bench tests needed...
  • From: Shannen Durphey <shannen@grolen.com>
• 730 Memcal decode
  • From: Davis <davis@mail.eecis.udel.edu>
• Re: 730 Memcal decode
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 730 Memcal decode
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: MAF BLM based tuning
  • From: Shannen Durphey <shannen@grolen.com>
• Anyone else interested in Rochester FI??
  • From: Shannen Durphey <shannen@grolen.com>
• Re: PI closed loop algorithm for 1227747 ECU?
  • From: Scott Lundahl <scott@lumenetics.com>
• Re: Crankshaft sensor
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: BINs needed
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• RE: '870 to '165 swap.....
  • From: "Craig Marcho" <marcho@flash.net>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: PI closed loop algorithm for 1227747 ECU?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Anyone else interested in Rochester FI??
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: '870 to '165 swap.....
  • From: Shannen Durphey <shannen@grolen.com>
• Re: '870 to '165 swap.....
  • From: "Bruce Plecan" <nacelp@bright.net>
• Mandatory TC Lockup
  • From: "TRAX" <trax@frederickmd.com>
• Re: Mandatory TC Lockup
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: ECM for forced induction
  • From: Bill Shaw <bshaw@connix.com>
• Re: Mandatory TC Lockup
  • From: "TK" <terryk@foothill.net>
• Inverted flight EFI?
  • From: ECMnut@aol.com
• Re: Mandatory TC Lockup
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Mandatory TC Lockup
  • From: "TK" <terryk@foothill.net>
• Re: ECM for forced induction
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Anyone else interested in Rochester FI??
  • From: Len Sabatine <sabatine@epix.net>
• Re: Mandatory TC Lockup
  • From: "TK" <terryk@foothill.net>
• Re: Inverted flight EFI?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Mandatory TC Lockup
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Anyone else interested in Rochester FI??
  • From: Doug Dayson <djdayson@home.com>
• Re: Anyone else interested in Rochester FI??
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: '870 to '165 swap.....
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Bench tests needed...
  • From: Ludis Langens <ludis@cruzers.com>
• Thanks for the help
  • From: "K.E. Towle" <karljiml@compuserve.com>
• Re: 730 Memcal was... RE: MAF BLM based tuning
  • From: "K.E. Towle" <karljiml@compuserve.com>
• RE: Anyone else interested in Rochester FI??
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: Anyone else interested in Rochester FI??
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Bench tests needed...
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Mandatory TC Lockup
  • From: Rick Lindstedt <rick@mafb.org>
• Re: Mandatory TC Lockup
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: BINs needed
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Mandatory TC Lockup
  • From: Rick Lindstedt <rick@mafb.org>
• puzzled by almighty memcal.
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Mandatory TC Lockup
  • From: Rick Lindstedt <rick@mafb.org>
• Re: PI closed loop algorithm for 1227747 ECU?
  • From: Squash <realsquash@yahoo.com>
• RE: Anyone else interested in Rochester FI??
  • From: Don.F.Broadus@ucm.com
• Re: Mandatory TC Lockup
  • From: "Bruce Plecan" <nacelp@bright.net>
• engine control unit
  • From: Don.F.Broadus@ucm.com
• Re: Mandatory TC Lockup
  • From: Rick Lindstedt <rick@mafb.org>
• Re: Anyone else interested in Rochester FI??
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Mandatory TC Lockup
  • From: "TRAX" <trax@frederickmd.com>
• Re: Mandatory TC Lockup
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Mandatory TC Lockup
  • From: "Bruce Plecan" <nacelp@bright.net>
• O2 Inte delays
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: PI closed loop algorithm for 1227747 ECU?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Mandatory TC Lockup
  • From: steve ravet <sravet@arm.com>
• Re: BINs needed
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Anyone else interested in Rochester FI??
  • From: John Bachman <jdbachman@redrose.net>
• Re: BINs needed
  • From: steve ravet <sravet@arm.com>
• new bins uploaded
  • From: steve ravet <sravet@arm.com>
• Re: Inverted flight EFI?
  • From: KasaRyan@aol.com
• BDJS Bin?
  • From: "TK" <terryk@foothill.net>
• Re: BDJS Bin?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: PI closed loop algorithm for 1227747 ECU?
  • From: Scott Lundahl <scott@lumenetics.com>
• Connector Pins for '747 ECU
  • From: Scott Lundahl <lundahls@dusapharma.com>
• VSS ?
  • From: Scott Lundahl <lundahls@dusapharma.com>
• LTD1 Emulator
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: PI closed loop algorithm for 1227747 ECU?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Connector Pins for '747 ECU
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: VSS ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Connector Pins for '747 ECU
  • From: steve ravet <sravet@arm.com>
• Re: ECM for forced induction
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: Inverted flight EFI?
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: PI closed loop algorithm for 1227747 ECU?
  • From: rr <RRauscher@nni.com>
• Re: Anyone else interested in Rochester FI??
  • From: rr <RRauscher@nni.com>
• Inline VSS
  • From: Bob Valentine <bob@tecmark.com>
• Re: VSS ?
  • From: Bob Valentine <bob@tecmark.com>
• Delivery failure (shannen@grolen.com)
  • From: postmaster@postal.grolen.com
• Re: Connector Pins for '747 ECU
  • From: Shannen Durphey <shannen@grolen.com>
• Re: VSS ?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: VSS ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Connector Pins for '747 ECU
  • From: "Kevin R" <KEReyn@gte.net>
• Re: Power Data Graph - Was Re MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Connector Pins for '747 ECU
  • From: "K.E. Towle" <karljiml@compuserve.com>
• VSS ?
  • From: "K.E. Towle" <karljiml@compuserve.com>
• LT1 Comp
  • From: "Programmer" <nwester@eidnet.org>
• Re: ECM for forced induction
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Connector Pins for '747 ECU
  • From: bcroe@juno.com
• Wierd TCC lockup ... can u explain it?
  • From: "TRAX" <trax@frederickmd.com>
• Re: new bins uploaded
  • From: Ludis Langens <ludis@cruzers.com>
• RE: Wierd TCC lockup ... can u explain it?
  • From: Carl Summers <InTech@writeme.com>
• Re: ECM for forced induction
  • From: "black maj" <blackmin@hotmail.com>
• Re: Wierd TCC lockup ... can u explain it?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Connector Pins for '747 ECU
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Connector Pins for '747 ECU
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: VSS ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Abbrviations General EFI
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: Connector Pins for '747 ECU
  • From: Scott Lundahl <scott@lumenetics.com>
• Re: Abbrviations General EFI
  • From: "black maj" <blackmin@hotmail.com>
• Re: Abbrviations General EFI
  • From: "Bruce Plecan" <nacelp@bright.net>
• Power Data Graph - Was Re MAF BLM based tuning
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Connector Pins for '747 ECU
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Abbrviations General EFI
  • From: "Bruce Plecan" <nacelp@bright.net>
• Anyone with X-fires for sale?
  • From: "Kevin R" <KEReyn@gte.net>
• Fw: Anyone with X-fires for sale?
  • From: "Kevin R" <KEReyn@gte.net>
• Re: Abbrviations General EFI
  • From: "black maj" <blackmin@hotmail.com>
• Re: Abbrviations General EFI
  • From: "black maj" <blackmin@hotmail.com>
• Re: Abbreviations General EFI
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: VSS ?
  • From: Bob Valentine <bob@tecmark.com>
• Re: VSS ?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: puzzled by almighty memcal.
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Abbrviations General EFI
  • From: Shannen Durphey <shannen@grolen.com>
• Re: new bins uploaded
  • From: Shannen Durphey <shannen@grolen.com>
• Re: pt 2, new bins uploaded
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Abbrviations General EFI
  • From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
• RE: Inline VSS
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: VSS ?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Abbreviations General EFI
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Abbrviations General EFI
  • From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
• Re: VSS ?
  • From: "Sutcliffe, Peter" <Peter.Sutcliffe@team.telstra.com>
• Re: Abbreviations General EFI
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Abbrviations General EFI
  • From: dave.williams@chaos.lrk.ar.us (Dave Williams)
• Re: Abbrviations General EFI
  • From: Squash <realsquash@yahoo.com>
• Re: new bins uploaded
  • From: steve ravet <sravet@arm.com>
• Hiway mode spark and fuel ??
  • From: Squash <realsquash@yahoo.com>
• Re: Hiway mode spark and fuel ??
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Abbreviations General EFI
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: Hiway mode spark and fuel ??
  • From: Len Sabatine <sabatine@epix.net>
• Re: Hiway mode spark and fuel ??
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: ECM for forced induction
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Inverted flight EFI? (Grumpy's inna mood)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: MAF BLM based tuning
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: ECM interchangability?
  • From: Daniel Houlton <houlster@inficad.com>
• Re: Inverted flight EFI?
  • From: "Dave Zug" <dzug@delanet.com>
• Re: ECM interchangability?
  • From: "TK" <terryk@foothill.net>
• Archive utility (was Re: ECM interchangability?)
  • From: Daniel Houlton <houlster@inficad.com>
• Comment on the "Abbreviations" Thread Tizzy
  • From: garwillis@msn.com (Garfield Willis)
• Re: Hiway mode spark and fuel ??
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Hiway mode spark and fuel ??
  • From: Len Sabatine <sabatine@epix.net>
• Re: puzzled by almighty memcal.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Comment on the "Abbreviations" Thread Tizzy
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: Comment on the "Abbreviations" Thread Tizzy
  • From: garwillis@msn.com (Garfield Willis)
• butterfly whistle, and cure
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ECM for forced induction
  • From: "Bruce Plecan" <nacelp@bright.net>
• Heads-up
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Comment on the "Abbreviations" Thread Tizzy
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ECM for forced induction
  • From: Daniel Houlton <houlster@user1.inficad.com>
• Hello
  • From: "Rodney Fulk" <elixir@pathwaynet.com>
• CCC Mods
  • From: "Bruce Plecan" <nacelp@bright.net>
• Misc pics,
  • From: "Bruce Plecan" <nacelp@bright.net>
• LT1 files ?
  • From: "Programmer" <nwester@eidnet.org>
• Re: Misc pics,
  • From: "Kevin R" <KEReyn@gte.net>
• Re: LT1 files ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Bins needed
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• BCC ID help...
  • From: FieroMania@aol.com
• Re: BCC ID help...
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BCC ID help...
  • From: FieroMania@aol.com
• Re: BCC ID help...
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Inverted flight EFI? (Grumpy's inna mood) Fuel temp
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: LT1 files ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: LT1 files ?
  • From: "Programmer" <nwester@eidnet.org>
• Re: open loop non-cat bins
  • From: "Programmer" <nwester@eidnet.org>
• Re: Inverted flight EFI? (Grumpy's inna mood)
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Misc pics,
  • From: Bob Valentine <bob@tecmark.com>
• Re: BCC ID help...
  • From: Shannen Durphey <shannen@grolen.com>
• Re: LT1 files ?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Inverted flight EFI? (Grumpy's inna mood) Fuel temp
  • From: "Dave Zug" <dzug@delanet.com>
• Re: open loop non-cat bins
  • From: Shannen Durphey <shannen@grolen.com>
• Re: BCC ID help...
  • From: FieroMania@aol.com
• Re: LT1 files ?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Inverted flight EFI? (Grumpy's inna mood) Fuel temp
  • From: garwillis@msn.com (Garfield Willis)
• Re: LT1 files ?
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: LT1 files ?
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• RE: Misc pics,
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: open loop non-cat bins
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Inverted flight EFI? (Grumpy's inna mood) Fuel temp
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Inverted flight EFI? (Grumpy's inna mood) Fuel temp
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Archive utility
  • From: Christian Hack <christianh@pdd.edmi.com.au>
• Re: LT1 files ?
  • From: Len Sabatine <sabatine@epix.net>
• Re: Hello
  • From: Pat Ford <pford@qnx.com>
• Re: open loop non-cat bins
  • From: Pat Ford <pford@qnx.com>
• RE: LT1 files
  • From: Speartech <speartec@iquest.net>
• Re: LT1 files ?
  • From: "Programmer" <nwester@eidnet.org>
• Re: LT1 files ?
  • From: "Programmer" <nwester@eidnet.org>
• Re: LT1 files ?
  • From: Len Sabatine <sabatine@epix.net>
• EFI POW WOW
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: LT1 files ?
  • From: Eric Clark <eclark@hoser.com>
• RE: EFI POW WOW
  • From: "Rudi Machilek" <Rudi@vnet.net>
• Re: EFI POW WOW
  • From: "Jeffrey Scott" <jws6367@mailcity.com>
• Re: EFI POW WOW
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: EFI POW WOW
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: EFI POW WOW
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: LT1 files ?
  • From: Len Sabatine <sabatine@epix.net>
• Re: LT1 files
  • From: "Programmer" <nwester@eidnet.org>
• '747 and Proportional Stuff
  • From: rr <RRauscher@nni.com>
• EFI POW WOW
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: '747 and Proportional Stuff
  • From: Scott Lundahl <scott@lumenetics.com>
• RE: LT1 files
  • From: Speartech <speartec@iquest.net>
• GM Injector 17109596 ID
  • From: Bob Valentine <bob@tecmark.com>
• RE: EFI POW WOW
  • From: Mike Rolica <mrolica@meridian-mag.com>
• 1999 5.3 liter Vortec V-8-antitheft
  • From: "c y k" <ckyk@eudoramail.com>
• programmers and erasers
  • From: "Jim Yeagley" <jyeag@core.com>
• True definition of Knock
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: programmers and erasers
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: True definition of Knock
  • From: Squash <realsquash@yahoo.com>
• RE: EFI POW WOW
  • From: Eric Aos <EOA@spartek.com>
• Re: True definition of Knock
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: True definition of Knock
  • From: Eric Aos <EOA@spartek.com>
• Re: True definition of Knock
  • From: Squash <realsquash@yahoo.com>
• Re: True definition of Knock
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EFI POW WOW
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: True definition of Knock
  • From: Squash <realsquash@yahoo.com>
• Re: LT1 files
  • From: steve ravet <sravet@arm.com>
• Re: True definition of Knock
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: LT1 files
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: LT1 files
  • From: "Programmer" <nwester@eidnet.org>
• Re: True definition of Knock
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• RE: True definition of Knock
  • From: Squash <realsquash@yahoo.com>
• Re: True definition of Knock
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Buyin Parts
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: True definition of Knock
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: '747 and Proportional Stuff
  • From: rr <RRauscher@nni.com>
• Tuning a 727 or 730 with a Supercharger
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Robbins Nugent chip holders for the 2732
  • From: ECMnut@aol.com
• Re: Robbins Nugent chip holders for the 2732
  • From: "Craig Marcho" <not_valid_email@airmail.net>
• Re: Tuning a 727 or 730 with a Supercharger
  • From: "Programmer" <nwester@eidnet.org>
• Re: Tuning a 727 or 730 with a Supercharger
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Robbins Nugent chip holders for the 2732
  • From: JTesta1966@aol.com
• Re: Robbins Nugent chip holders for the 2732
  • From: "Programmer" <nwester@eidnet.org>
• Re: '747 and Proportional Stuff
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: True definition of Knock
  • From: Len Sabatine <sabatine@epix.net>
• Re: Tuning a 727 or 730 with a Supercharger
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: LS1 Hack?
  • From: "Programmer" <nwester@eidnet.org>
• Re: LT1 files
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Tuning a 727 or 730 with a Supercharger
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: True definition of Knock
  • From: Carl Summers <InTech@writeme.com>
• Re: Robbins Nugent chip holders for the 2732
  • From: "Kevin R" <KEReyn@gte.net>
• RE: True definition of Knock
  • From: Len Sabatine <sabatine@epix.net>
• Huntington to Catalina
  • From: garwillis@msn.com (Garfield Willis)
• Re: True definition of Knock
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Tuning a 727 or 730 with a Supercharger
  • From: "Dave Zug" <dzug@delanet.com>
• Aftermarket Bin dir
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Memcal ESC Filter Numbers, was Re: True definition of Knock
  • From: Ludis Langens <ludis@cruzers.com>
• RE: True definition of Knock
  • From: Carl Summers <InTech@writeme.com>
• RE: Huntington to Catalina
  • From: Carl Summers <InTech@writeme.com>
• RE: True definition of Knock
  • From: Carl Summers <InTech@writeme.com>
• nother car dead..sorta efi...not really gm..ford parts for sale
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: True definition of Knock
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: '747 and Proportional Stuff
  • From: Scott Lundahl <scott@lumenetics.com>
• Re: nother car dead..sorta efi...not really gm..ford parts for sale
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: nother car dead..sorta efi...not really gm..ford parts for sale
  • From: ECMnut@aol.com
• FYI - (or maybe not)
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: nother car dead..sorta efi...not really gm..ford parts for sale
  • From: "Programmer" <nwester@eidnet.org>
• Re: Aftermarket Bin dir
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Robbins Nugent chip holders for the 2732
  • From: JTesta1966@aol.com
• RE: nother car dead..sorta efi...not really gm..ford parts for sa le
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: EFI POW WOW
  • From: Squash <realsquash@yahoo.com>
• Engine swap computer & wiring question
  • From: "Tim De Coster" <craz1@softhome.net>
• RE: Huntington to Catalina
  • From: Carl Summers <InTech@writeme.com>
• Re: Huntington to Catalina
  • From: garwillis@msn.com (Garfield Willis)
• Re: Huntington to Catalina
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Engine swap computer & wiring question
  • From: steve ravet <sravet@arm.com>
• Re: Engine swap computer & wiring question
  • From: "Tim De Coster" <craz1@softhome.net>
• Re: True definition of Knock
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Engine swap computer & wiring question
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Engine swap computer & wiring question
  • From: steve ravet <sravet@arm.com>
• Re: nother car dead..sorta efi...not really gm..ford parts for sale
  • From: Eric Clark <eclark@hoser.com>
• Re: Huntington to Catalina
  • From: garwillis@msn.com (Garfield Willis)
• Re: Engine swap computer & wiring question
  • From: "Tim De Coster" <craz1@softhome.net>
• Re: Engine swap computer & wiring question
  • From: "Tim De Coster" <craz1@softhome.net>
• Re: nother car dead..sorta efi...not really gm..ford parts for sale
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Engine swap computer & wiring question
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: '747 and Proportional Stuff
  • From: garwillis@msn.com (Garfield Willis)
• time delay = degrees
  • From: Don.F.Broadus@ucm.com
• Re: True definition of Knock
  • From: Len Sabatine <sabatine@epix.net>
• Fwd: RE: Oxygen Sensors
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Engine swap computer & wiring question
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: RE: Oxygen Sensors
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Engine swap computer & wiring question
  • From: Don.F.Broadus@ucm.com
• Re: Engine swap computer & wiring question
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: nother car dead..sorta efi...not really gm..ford parts for sale
  • From: Eric Clark <eclark@hoser.com>
• Re: nother car dead..sorta efi...not really gm..ford parts for sale
  • From: "Programmer" <nwester@eidnet.org>
• Re: nother car dead..sorta efi...not really gm..ford parts for sale
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Huntington to Catalina
  • From: Carl Summers <InTech@writeme.com>
• TLC
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: True definition of Knock
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Huntington to Catalina
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Huntington to Catalina
  • From: Carl Summers <InTech@writeme.com>
• Re: FYI - (or maybe not)
  • From: Squash <realsquash@yahoo.com>
• Re: Engine swap computer & wiring question
  • From: "Programmer" <nwester@eidnet.org>
• Re: Engine swap computer & wiring question
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: time delay = degrees
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Huntington to Catalina
  • From: garwillis@msn.com (Garfield Willis)
• Re: nother car dead..sorta efi...not really gm..ford parts for sale
  • From: Shannen Durphey <shannen@grolen.com>
• Re: nother car dead..sorta efi...not really gm..ford parts for sale
  • From: "Gerald Pelnar" <wd0fyf@mpks.net>
• Re: nother car dead..sorta efi...not really gm..ford parts for sale
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: nother car dead..sorta efi...not really gm..ford parts for sale
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Engine swap computer & wiring question
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Chatting with a 730
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: Engine swap computer & wiring question
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Engine swap computer & wiring question
  • From: Shannen Durphey <shannen@grolen.com>
• RE: Chatting with a 730
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• RE: nother car dead..sorta efi...not really gm..ford parts for sa le
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: time delay = degrees
  • From: Don.F.Broadus@ucm.com
• RE: Chatting with a 730
  • From: Pat Ford <pford@qnx.com>
• Re: Archive idea
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Chatting with a 730
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Chatting with a 730
  • From: Matt S Bower <m.s.bower@cummins.com>
• Re: Engine swap computer & wiring question
  • From: Todd Israels <israels@mnsi.net>
• Limited Duration Extra Turbo Boost
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: '747 and Proportional Stuff
  • From: garwillis@msn.com (Garfield Willis)
• Re: diy'er causing a recall
  • From: KasaRyan@aol.com
• Re: Limited Duration Extra Turbo Boost
  • From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
• 332 based ecms
  • From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
• '92 Y-body LT1 bin file needed.
  • From: "Craig Marcho" <not_valid_email@airmail.net>
• '92 Y-body LT1 bin file needed.
  • From: "Craig Marcho" <not_valid_email@airmail.net>
• GM book on TPI/ Gas tank venting on TPI
  • From: Vinnie Moscaritolo <vinnie@vmeng.com>
• Re: GM book on TPI/ Gas tank venting on TPI
  • From: Squash <realsquash@yahoo.com>
• Re: Engine swap computer & wiring question
  • From: "Tim De Coster" <craz1@softhome.net>
• Re: '92 Y-body LT1 bin file needed.
  • From: Shannen Durphey <shannen@grolen.com>
• Re: GM book on TPI/ Gas tank venting on TPI
  • From: steve ravet <sravet@arm.com>
• Re: '92 Y-body LT1 bin file needed.
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: 4L60e transmission question
  • From: steve ravet <sravet@arm.com>
• Re: Engine swap computer & wiring question
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 4L60e transmission question
  • From: "Rich Vandervoort" <richvandervoort@hotmail.com>
• Re: 4L60e transmission question
  • From: Shannen Durphey <shannen@grolen.com>
• TCC lower temp
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: '747 and Proportional Stuff
  • From: garwillis@msn.com (Garfield Willis)
• TCC lower temp
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: '747 and Proportional Stuff
  • From: rr <RRauscher@nni.com>
• Re: GM book on TPI/ Gas tank venting on TPI
  • From: rr <RRauscher@nni.com>
• Re: 332 based ecms
  • From: "EK" <sk8er@netmost.com>
• Re: TCC lower temp
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: nother car dead..sorta efi...not really gm..ford parts for sale
  • From: "Fran and Bud" <quest100@gte.net>
• Re: Engine swap computer & wiring question
  • From: "K.E. Towle" <karljiml@compuserve.com>
• Re: '747 and Proportional Stuff
  • From: rr <RRauscher@nni.com>
• Commercial posting policy
  • From: Orin <orin>
• Re: GM book on TPI/ Gas tank venting on TPI
  • From: Shannen Durphey <shannen@grolen.com>
• Re: '747 and Proportional Stuff
  • From: garwillis@msn.com (Garfield Willis)
• RE: Chatting with a 730
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Re: '92 Y-body LT1 bin file needed.
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• 747 Rom Emulator
  • From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
• Re: 747 Rom Emulator
  • From: Steven Ciciora <ciciora@Ciciora.com>
• Re: Engine swap computer & wiring question
  • From: Todd Israels <israels@mnsi.net>
• Conditioned reflexes, min EFI
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Robbins Nugent chip holders for the 2732
  • From: Mike Dillon <mdill@lsil.com>
• Re: Robbins Nugent chip holders for the 2732
  • From: JTesta1966@aol.com
• Re: Robbins Nugent chip holders for the 2732
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Robbins Nugent chip holders for the 2732
  • From: "Craig Marcho" <not_valid_email@airmail.net>
• Re: Robbins Nugent chip holders for the 2732
  • From: JTesta1966@aol.com
• Re: Robbins Nugent chip holders for the 2732
  • From: Squash <realsquash@yahoo.com>
• Re: Robbins Nugent chip holders for the 2732
  • From: Squash <realsquash@yahoo.com>
• Re: Robbins Nugent chip holders for the 2732
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Robbins Nugent chip holders for the 2732
  • From: Shannen Durphey <shannen@grolen.com>
• need help with '165 in Vette
  • From: "NickG" <nikog@mediaone.net>
• Re: need help with '165 in Vette
  • From: "Bruce Plecan" <nacelp@bright.net>
• 89 305 favorite?.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Looking for a 16149396 ECM
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: 89 305 favorite?.
  • From: Len Sabatine <sabatine@epix.net>
• Re: 89 305 favorite?.
  • From: Davis <davis@mail.eecis.udel.edu>
• Re: 89 305 favorite? Follow up
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: need help with '165 in Vette
  • From: Davis <davis@mail.eecis.udel.edu>
• Re: 89 305 favorite?.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Casting Numbers
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 89 305 favorite?.
  • From: Davis <davis@mail.eecis.udel.edu>
• Re: 89 305 favorite?.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Chatting with a 730
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: need help with '165 in Vette
  • From: "Bruce Plecan" <nacelp@bright.net>
• GM Training Manuals
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: GM Training Manuals
  • From: Shannen Durphey <shannen@grolen.com>
• Re: TCC lower temp
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: 1999 5.3 liter Vortec V-8-antitheft
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: Casting Numbers
  • From: Len Sabatine <sabatine@epix.net>
• reading flash chips... was: Re: Looking for a 16149396 ECM
  • From: ECMnut@aol.com
• RE: '92 Y-body LT1 bin file needed.
  • From: "Craig Marcho" <marcho@flash.net>
• RE: '92 Y-body LT1 bin file needed.
  • From: Roger Heflin <rah@horizon.hit.net>
• RE: '92 Y-body LT1 bin file needed.
  • From: "Craig Marcho" <marcho@flash.net>
• Re: Robbins Nugent chip holders for the 2732
  • From: "Programmer" <nwester@eidnet.org>
• Re: Casting Numbers
  • From: "Programmer" <nwester@eidnet.org>
• prom
  • From: Rich Baxter <rcbaxter@snet.net>
• Re: prom
  • From: Chipsbyal@aol.com
• Re: '92 Y-body LT1 bin file needed.
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• Re: need help with '165 in Vette
  • From: "NickG" <nikog@mediaone.net>
• Re: prom
  • From: Ludis Langens <ludis@cruzers.com>
• [no subject]
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Re: Chatting with a 730
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Re: MAF BLM based tuning
  • From: romans@starstream.net (Romans, Mark)
• Re: GM Training Manuals
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: reading flash chips... was: Re: Looking for a 16149396 ECM
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: reading flash chips... was: Re: Looking for a 16149396 ECM
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: reading flash chips... was: Re: Looking for a 16149396 ECM
  • From: Andrew Mattei <amattei@mindspring.com>
• 16149396 ECM - Yep, how much?
  • From: "TK" <terryk@foothill.net>
• Re: 16149396 ECM - Yep, how much?
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Injector sizing for S/C applications
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: reading flash chips... was: Re: Looking for a 16149396 ECM
  • From: ECMnut@aol.com
• Re: Casting Numbers
  • From: "John D. Bachman" <jdbachman@redrose.net>
• Re:
  • From: Rodney Davis <rodldavis@home.com>
• Re: prom
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Accel DFI help maybe?
  • From: "J. T. Spilman" <jtstexas@home.com>
• Re: 16149396 ECM - Yep, how much?
  • From: "TK" <terryk@foothill.net>
• Re: Accel DFI help maybe?
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: Accel DFI help maybe?
  • From: "C. Brooks" <cbrooks1@tqci.net>
• FW: efi bin's cross reference
  • From: Marc Piccioni <piccioni@cadvision.com>
• Re: efi bin's cross reference
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: prom
  • From: Ludis Langens <ludis@cruzers.com>
• RE: Accel DFI help maybe?
  • From: "J. T. Spilman" <jtstexas@home.com>
• Re: efi bin's cross reference
  • From: MdntRdr1@aol.com
• 89 Camaro/Firebird 5.0 5-Speed TPI BIN
  • From: romans@starstream.net (Romans, Mark)
• Re: efi bin's cross reference
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Accel DFI help maybe?
  • From: Chipsbyal@aol.com
• Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
  • From: Chipsbyal@aol.com
• Re: MAF BLM based tuning
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: efi bin's cross reference
  • From: Shannen Durphey <shannen@grolen.com>
• Mode $0a on 7730
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: MAF BLM based tuning
  • From: "Dave Zug" <dzug@delanet.com>
• Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
  • From: "Dave Zug" <dzug@delanet.com>
• Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
  • From: Shannen Durphey <shannen@grolen.com>
• Re: LS1 Hack?
  • From: "Dave & Irina Eicher" <sailors@mwci.net>
• Dizzy to Coil pack
  • From: "black maj" <blackmin@hotmail.com>
• It works
  • From: "Todd Burkard" <toddburkard@pcmc.com>
• Re: LS1 Hack?
  • From: Chipsbyal@aol.com
• RE: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Dizzy to Coil pack
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: LS1 Hack?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
  • From: "Bruce Plecan" <nacelp@bright.net>
• Lean Cruise.
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Re: Lean Cruise.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
  • From: romans@starstream.net (Romans, Mark)
• Re: GM Training Manuals
  • From: steve ravet <sravet@arm.com>
• [no subject]
  • From: Pat Ford <pford@qnx.com>
• ALDL on 747
  • From: Squash <realsquash@yahoo.com>
• RE: ALDL on 747
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Numeric BCCs
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Numeric BCCs
  • From: Chipsbyal@aol.com
• 427 ecu file?
  • From: KasaRyan@aol.com
• Re: 427 ecu file?
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: ALDL on 747
  • From: Squash <realsquash@yahoo.com>
• Re: LS1 Hack?
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: ALDL on 747
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Numeric BCCs
  • From: "Craig Marcho" <not_valid_email@airmail.net>
• Re: ALDL on 747
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Mode $0a on 7730
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: ALDL on 747
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Mode $0a on 7730
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: Accel DFI help maybe?
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• RE: HT502-Retro-Kit BIN Needed
  • From: Carl Summers <InTech@writeme.com>
• Re: MAF BLM based tuning
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Buick 3800 ECM's
  • From: Speartech <speartec@iquest.net>
• HT502-Retro-Kit BIN Needed
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: Mode $0a on 7730
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: Buick 3800 ECM's
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Mode $0a on 7730
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Numeric BCCs
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Another Newbie Question
  • From: "c y k" <ckyk@eudoramail.com>
• Re: Another Newbie Question
  • From: KasaRyan@aol.com
• Re: TPI Conversion?
  • From: "Thomas Matthews" <tmatthew@stny.rr.com>
• Re: Numeric BCCs
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Buick 3800 ECM's
  • From: "TK" <terryk@foothill.net>
• Re: Another Newbie Question
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Numeric BCCs
  • From: Shannen Durphey <shannen@grolen.com>
• aumh bin uploaded
  • From: Bob Valentine <bob@tecmark.com>
• Re: LS1 Hack?
  • From: romans@starstream.net (Romans, Mark)
• Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
  • From: romans@starstream.net (Romans, Mark)
• Re: MAF BLM based tuning
  • From: romans@starstream.net (Romans, Mark)
• Re: MAF BLM based tuning
  • From: romans@starstream.net (Romans, Mark)
• Saturn stuff
  • From: "Gerald Pelnar" <wd0fyf@mpks.net>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
  • From: "TK" <terryk@foothill.net>
• Re: aumh bin uploaded
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Another Newbie Question
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Saturn stuff
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: MAF BLM based tuning
  • From: "Dave Zug" <dzug@delanet.com>
• Re: MAF BLM based tuning
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Another Newbie Question
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Saturn stuff
  • From: Ludis Langens <ludis@cruzers.com>
• RE: Casting Numbers
  • From: Mike Rolica <mrolica@meridian-mag.com>
• the 9th injector...
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: Saturn stuff
  • From: Chipsbyal@aol.com
• Re: Mode $0a on 7730
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• RE: the 9th injector...
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Saturn stuff
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• 165 ECM idle question
  • From: Rick Lindstedt <rick@mafb.org>
• Re:3800 ECM's
  • From: Speartech <speartec@iquest.net>
• Rev Limiter in AUJP
  • From: Squash <realsquash@yahoo.com>
• Re: 165 ECM idle question
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: the 9th injector...
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: Rev Limiter in AUJP
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: the 9th injector...
  • From: Squash <realsquash@yahoo.com>
• RE: the 9th injector...
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Re: Robbins Nugent chip holders for the 2732
  • From: Mike Dillon <mdill@lsil.com>
• 2.8v6 tpi and a 730
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: 2.8v6 tpi and a 730
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Rev Limiter in AUJP
  • From: rrauscher@nni.com
• RE: 2.8v6 tpi and a 730
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: 2.8v6 tpi and a 730
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 2.8v6 tpi and a 730
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Rev Limiter in AUJP
  • From: Squash <realsquash@yahoo.com>
• RE: 2.8v6 tpi and a 730
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: 2.8v6 tpi and a 730
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 2.8v6 tpi and a 730
  • From: rr <RRauscher@nni.com>
• Re: Robbins Nugent chip holders for the 2732
  • From: ECMnut@aol.com
• Re: the 9th injector...
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: MAF BLM based tuning
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: the 9th injector...
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: 2.8v6 tpi and a 730
  • From: Ludis Langens <ludis@cruzers.com>
• Re: MAF BLM based tuning
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: Saturn stuff
  • From: "Gerald Pelnar" <wd0fyf@mpks.net>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Mode $0a on 7730
  • From: "Paul Blackmore" <paul_blackmore@hotmail.com>
• Another Newbie Question, part II
  • From: "hi 50" <ckyk@hotmail.com>
• Re: 255 MAF? (was blm based tuning)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Another Newbie Question, part II
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 2.8v6 tpi and a 730
  • From: Shannen Durphey <shannen@grolen.com>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Another Newbie Question, part II
  • From: Shannen Durphey <shannen@grolen.com>
• Re: MAF BLM based tuning
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 255 MAF? (was blm based tuning)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 255 MAF? (was blm based tuning)
  • From: Shannen Durphey <shannen@grolen.com>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Another Newbie Question, part II
  • From: Shannen Durphey <shannen@grolen.com>
• Grand Prix digital dash [non efi]
  • From: Bob Valentine <bob@tecmark.com>
• 255 MAF? (was blm based tuning)
  • From: "Dave Zug" <dzug@delanet.com>
• Re: MAF BLM based tuning
  • From: "Dave Zug" <dzug@delanet.com>
• Re: MAF BLM based tuning
  • From: "Dave Zug" <dzug@delanet.com>
• Re: MAF BLM based tuning
  • From: "Dave Zug" <dzug@delanet.com>
• Re: MAF BLM based tuning
  • From: "Dave Zug" <dzug@delanet.com>
• Re: MAF BLM based tuning
  • From: "Dave Zug" <dzug@delanet.com>
• Re: MAF BLM based tuning
  • From: "Dave Zug" <dzug@delanet.com>
• Re: MAF BLM based tuning
  • From: "Dave Zug" <dzug@delanet.com>
• Re: 255 MAF? (was blm based tuning)
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Another Newbie Question, part II
  • From: garwillis@msn.com (Garfield Willis)
• Re: Another Newbie Question, part II
  • From: "Dave Zug" <dzug@delanet.com>
• [ADMIN] Attachments
  • From: Orin <orin>
• Re: Another Newbie Question, part II
  • From: "Dave Zug" <dzug@delanet.com>
• Re: 255 MAF? (was blm based tuning)
  • From: "Dave Zug" <dzug@delanet.com>
• Re: the 9th injector...
  • From: Pat Ford <pford@qnx.com>
• Buick ECM Trivia
  • From: Ludis Langens <ludis@cruzers.com>
• Re: the 9th injector...
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: 2.8v6 tpi and a 730
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: the 9th injector...
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: the 9th injector...
  • From: Pat Ford <pford@qnx.com>
• RE: was MAF BLM based tuning now cab manifold to port injection
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: MAF BLM based tuning
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: 2.8v6 tpi and a 730
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: MAF BLM based tuning
  • From: "Dave Zug." <dzug@delanet.com>
• Re: Buick ECM Trivia
  • From: JTesta1966@aol.com
• Re: the 9th injector...
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• ADDX 1657
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: the 9th injector...
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: the 9th injector...
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ADDX 1657
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: ADDX 1657
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: the 9th injector...
  • From: Pat Ford <pford@qnx.com>
• RE: the 9th injector...
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 2.8v6 tpi and a 730
  • From: Ernst denBroeder <edenbroe@cisco.com>
• IAC parameters
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: the 9th injector...
  • From: Pat Ford <pford@qnx.com>
• Re: ADDX 1657
  • From: Pat Ford <pford@qnx.com>
• RE: the 9th injector...
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: the 9th injector...
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: the 9th injector...
  • From: Ernst denBroeder <edenbroe@cisco.com>
• RE: the 9th injector...
  • From: Pat Ford <pford@qnx.com>
• Re: the 9th injector...
  • From: Pat Ford <pford@qnx.com>
• Re: IAC parameters
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: the 9th injector...
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: the 9th injector...
  • From: Pat Ford <pford@qnx.com>
• Re: IAC parameters
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: First quote in on chip carriers (Ouch)
  • From: Mike Dillon <mdill@lsil.com>
• Re: was MAF BLM based tuning now cab manifold to port injection
  • From: "Dave Zug." <dzug@delanet.com>
• RE: the 9th injector...
  • From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
• Re: First quote in on chip carriers (Ouch)
  • From: "Craig Marcho" <not_valid_email@airmail.net>
• Re: First quote in on chip carriers (Ouch)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: the 9th injector...
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: was MAF BLM based tuning now cab manifold to port injection
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: First quote in on chip carriers (Ouch)
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Buick ECM Trivia
  • From: JTesta1966@aol.com
• Re: Engine swap computer & wiring question (& 3800SC)
  • From: "Tim De Coster" <craz1@softhome.net>
• Re: C3 with 8192 ALDL
  • From: Pat Ford <pford@qnx.com>
• Re: Engine swap computer & wiring question
  • From: "Tim De Coster" <craz1@softhome.net>
• Re: Engine swap computer & wiring question
  • From: "Tim De Coster" <craz1@softhome.net>
• Re: First quote in on chip carriers (Ouch)
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Engine swap computer & wiring question
  • From: "Tim De Coster" <craz1@softhome.net>
• Re: Engine swap computer & wiring question (& 3800SC)
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Buick ECM Trivia
  • From: Ludis Langens <ludis@cruzers.com>
• Re: MAF BLM based tuning
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: 1999 5.3 liter Vortec V-8-antitheft
  • From: "Tim De Coster" <craz1@softhome.net>
• C3 with 8192 ALDL
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 2.8v6 tpi and a 730
  • From: "Tim De Coster" <craz1@softhome.net>
• Re: 2.8v6 tpi and a 730
  • From: "Tim De Coster" <craz1@softhome.net>
• Quick ECM ID
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Grand Prix digital dash [non efi]
  • From: "Tim De Coster" <craz1@softhome.net>
• Re: Another Newbie Question, part II
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• RE: 2.8v6 tpi and a 730
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: First quote in on chip carriers (Ouch)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: was MAF BLM based tuning now cab manifold to port injection
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: MAF BLM based tuning
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: 2.8v6 tpi and a 730
  • From: ECMnut@aol.com
• Re: MAF BLM based tuning
  • From: Ludis Langens <ludis@cruzers.com>
• Re: MAF BLM based tuning
  • From: Ludis Langens <ludis@cruzers.com>
• RE: First quote in on chip carriers (Ouch)
  • From: Squash <realsquash@yahoo.com>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Another Newbie Question, part II
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: MAF BLM based tuning
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM manufacturer and device IDs
  • From: thergen@svn.net
• Re: First quote in on chip carriers (Ouch)
  • From: ECMnut@aol.com
• EPROM manufacturer and device IDs
  • From: Ludis Langens <ludis@cruzers.com>
• Re: First quote in on chip carriers (Ouch)
  • From: ECMnut@aol.com
• Re: Buick ECM Trivia
  • From: JTesta1966@aol.com
• Re: Buick ECM Trivia
  • From: Ludis Langens <ludis@cruzers.com>
• The Factory harness...is good!
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: MAF BLM based tuning
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Another Newbie Question, part III
  • From: "hi 50" <ckyk@hotmail.com>
• Re: Another Newbie Question, part III
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Another Newbie Question, part II
  • From: Tedscj@aol.com
• Re: Another Newbie Question, part II
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Another Newbie Question, part III
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: Another Newbie Question, part III
  • From: Squash <realsquash@yahoo.com>
• Re: Engine swap computer & wiring question
  • From: Shannen Durphey <shannen@grolen.com>
• Re: C3 with 8192 ALDL
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Mike V-> turbocharged z24 (was Re: 2.8v6 tpi and a 730)
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 1999 5.3 liter Vortec V-8-antitheft
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: Another Newbie Question, part III
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: Another Newbie Question, part II
  • From: "TK" <terryk@foothill.net>
• A post from the newbie brigade - I'm getting closer (1 of many)
  • From: KasaRyan@aol.com
• Re: A post from the newbie brigade - I'm getting closer (1 of many)
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: C3 with 8192 ALDL
  • From: Ludis Langens <ludis@cruzers.com>
• Re: EPROM manufacturer and device IDs
  • From: Ludis Langens <ludis@cruzers.com>
• Re: C3 with 8192 ALDL
  • From: Shannen Durphey <shannen@grolen.com>
• Re: A post from the newbie brigade - I'm getting closer (1 of many)
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Another Newbie Question, part II
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: was MAF BLM based tuning now cab manifold to port injection
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: EPROM manufacturer and device IDs
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Another Newbie Question, part II
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: A post from the newbie brigade - I'm getting closer (1 of man y)
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Mike V-> turbocharged z24 (was Re: 2.8v6 tpi and a 730)
  • From: ECMnut@aol.com
• RE: Another Newbie Question, part II
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: Mike V-> turbocharged z24 (was Re: 2.8v6 tpi and a 730)
  • From: ECMnut@aol.com
• Re: Another Newbie Question, part II
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Another Newbie Question, part III
  • From: Squash <realsquash@yahoo.com>
• Re: Mike V-> turbocharged z24 (was Re: 2.8v6 tpi and a 730)
  • From: Sean879@aol.com
• TPI '165 pulling timing after Cold start
  • From: Gabe <gellett@earthlink.net>
• ECU Bin Bytes 0x8000-0x8008
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• RE: EPROM manufacturer and device IDs
  • From: Shannen@grolen.com
• Re: Mike V-> turbocharged z24 (was Re: 2.8v6 tpi a
  • From: Shannen@grolen.com
• Re: ECU Bin Bytes 0x8000-0x8008
  • From: Marc Randolph <mrand@pobox.com>
• 95 S-blazer base timeing
  • From: Matt S Bower <m.s.bower@cummins.com>
• RE: EPROM manufacturer and device IDs
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: TPI '165 pulling timing after Cold start
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: TPI '165 pulling timing after Cold start
  • From: Gabe <gellett@earthlink.net>
• RE: TPI '165 pulling timing after Cold start
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: A post from the newbie brigade - I'm getting closer (1 of many)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: TPI '165 pulling timing after Cold start
  • From: Gabe <gellett@earthlink.net>
• Re: TPI '165 pulling timing after Cold start
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 95 S-blazer base timeing
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: TPI '165 pulling timing after Cold start
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: TPI '165 pulling timing after Cold start
  • From: Gabe <gellett@earthlink.net>
• Re: TPI '165 pulling timing after Cold start
  • From: "Craig Marcho" <not_valid_email@airmail.net>
• Re: ECU Bin Bytes 0x8000-0x8008
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: TPI '165 pulling timing after Cold start
  • From: Gabe <gellett@earthlink.net>
• Re: Chip carrier buy for less than the price of a new car.
  • From: Mike Dillon <mdill@lsil.com>
• Got VSS . . .
  • From: Scott Lundahl <scott@lumenetics.com>
• Re: 95 S-blazer base timeing
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: EPROM manufacturer and device IDs
  • From: bcroe@juno.com
• After Market Harness
  • From: bcroe@juno.com
• Re: TPI '165 pulling timing after Cold start
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: TPI '165 pulling timing after Cold start
  • From: Ludis Langens <ludis@cruzers.com>
• Re: TPI '165 pulling timing after Cold start
  • From: Ludis Langens <ludis@cruzers.com>
• Re: ECU Bin Bytes 0x8000-0x8008
  • From: Ludis Langens <ludis@cruzers.com>
• Hi
  • From: "black maj" <blackmin@hotmail.com>
• Re: Hi
  • From: "black maj" <blackmin@hotmail.com>
• Re: Got VSS . . .
  • From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
• Re: IAC parameters
  • From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
• Re: 95 S-blazer base timeing
  • From: Chipsbyal@aol.com
• Re: EPROM manufacturer and device IDs
  • From: thergen@svn.net
• Re: TPI '165 pulling timing after Cold start
  • From: Gabe <gellett@earthlink.net>
• Re: IAC parameters
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Got VSS . . .
  • From: "TK" <terryk@foothill.net>
• Re: Got VSS . . .
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Was Chip carrier now sockets
  • From: Ludis Langens <ludis@cruzers.com>
• Re: EPROM manufacturer and device IDs
  • From: Ludis Langens <ludis@cruzers.com>
• Re: TPI '165 pulling timing after Cold start
  • From: "John D. Bachman" <jdbachman@redrose.net>
• Re: TPI '165 pulling timing after Cold start
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM manufacturer and device IDs
  • From: Matt S Bower <m.s.bower@cummins.com>
• RE: TPI '165 pulling timing after Cold start
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: ECU Bin Bytes 0x8000-0x8008
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• RE: ECU Bin Bytes 0x8000-0x8008
  • From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
• Re: ECU Bin Bytes 0x8000-0x8008
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: TPI '165 pulling timing after Cold start
  • From: Gabe <gellett@earthlink.net>
• Re: Got VSS . . .
  • From: rrauscher@nni.com
• Need info/help on gm ecm conversion
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: TPI '165 pulling timing after Cold start
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Need info/help on gm ecm conversion
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Need info/help on gm ecm conversion
  • From: Carl Summers <InTech@writeme.com>
• Re: TPI '165 pulling timing after Cold start
  • From: Ludis Langens <ludis@cruzers.com>
• Re: TPI '165 pulling timing after Cold start
  • From: romans@starstream.net (Romans, Mark)
• Re: Need info/help on gm ecm conversion
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Need info/help on gm ecm conversion
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: TPI '165 pulling timing after Cold start
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Need info/help on gm ecm conversion
  • From: "Programmer" <nwester@eidnet.org>
• Calcing diff ratios ?
  • From: "Programmer" <nwester@eidnet.org>
• Re: Need info/help on gm ecm conversion
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: TPI '165 pulling timing after Cold start
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: TPI '165 pulling timing after Cold start
  • From: Squash <realsquash@yahoo.com>
• Re: Need info/help on gm ecm conversion
  • From: Shannen Durphey <shannen@grolen.com>
• Re: TPI '165 pulling timing after Cold start
  • From: "Bruce Plecan" <nacelp@bright.net>
• FreeScan 2.0.0
  • From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
• Re: TPI '165 pulling timing after Cold start
  • From: romans@starstream.net (Romans, Mark)
• Re: TPI '165 pulling timing after Cold start
  • From: Gabe <gellett@earthlink.net>
• Re: EPROM manufacturer and device IDs
  • From: "Jeff M" <tystorm@email.msn.com>
• Injector R+R
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Injector R+R
  • From: Steven Ciciora <ciciora@Ciciora.com>
• Re: Injector R+R
  • From: ECMnut@aol.com
• Re: Injector R+R
  • From: ECMnut@aol.com
• Re: Injector R+R
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Injector R+R
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Injector R+R
  • From: garwillis@msn.com (Garfield Willis)
• Re: Injector R+R
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: spare ecm's '7730 & '7748
  • From: rr <RRauscher@nni.com>
• Re: Injector R+R
  • From: rr <RRauscher@nni.com>
• Re: spare ecm's '7730 & '7748
  • From: rr <RRauscher@nni.com>
• Re: Injector R+R
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: Injector R+R
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Injector R+R
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: Injector R+R
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: Injector R+R
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Injector R+R
  • From: "Bruce Plecan" <nacelp@bright.net>
• What the max rpms anyones used a gmecm on?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Injector R+R
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: What the max rpms anyones used a gmecm on?
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Injector R+R
  • From: garwillis@msn.com (Garfield Willis)
• Re: spare ecm's '7730 & '7748
  • From: "Bruce Plecan" <nacelp@bright.net>
• Injector Duty cycle calculations
  • From: timsiford@hushmail.com
• Re: Injector Duty cycle calculations
  • From: timsiford@hushmail.com
• Re: Injector Duty cycle calculations
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Injector Duty cycle calculations
  • From: timsiford@hushmail.com
• Re: Injector Duty cycle calculations
  • From: timsiford@hushmail.com
• ATTN Scott: Re: Injector Duty cycle calculations
  • From: timsiford@hushmail.com
• Injector PWs - was duty cycle
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: Injector Duty cycle calculations
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Injector Duty cycle calculations
  • From: romans@starstream.net (Romans, Mark)
• Re: Injector Duty cycle calculations
  • From: timsiford@hushmail.com
• Re: ATTN Scott: Re: Injector Duty cycle calculations
  • From: timsiford@hushmail.com
• Re: Injector Duty cycle calculations
  • From: timsiford@hushmail.com
• Re: Injector Duty cycle calculations
  • From: timsiford@hushmail.com
• Re: Injector Duty cycle calculations
  • From: Scott Knight <scott@scottknight.com>
• Re: Injector Duty cycle calculations
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Injector Duty cycle calculations
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Injector Duty cycle calculations
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Injector Duty cycle calculations
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: ATTN Scott: Re: Injector Duty cycle calculations
  • From: Scott Knight <scott@scottknight.com>
• Re: Injector Duty cycle calculations
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Considering Injector Change..
  • From: timsiford@hushmail.com
• Re: Injector PWs - was duty cycle
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Injector Duty cycle calculations
  • From: Roger Heflin <rah@horizon.hit.net>
• Considering Injector Change..
  • From: "Rodney Fulk" <elixir@pathwaynet.com>
• Re: Injector Duty cycle calculations
  • From: ECMnut@aol.com
• RE: Considering Injector Change..
  • From: "the Fredericks" <fredericksk@worldnet.att.net>
• Re: Considering Injector Change..
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Considering Injector Change..
  • From: "Rodney Fulk" <elixir@pathwaynet.com>
• RE: Considering Injector Change..
  • From: "Rodney Fulk" <elixir@pathwaynet.com>
• Re: Considering Injector Change..
  • From: Len Sabatine <sabatine@epix.net>
• Re: Considering Injector Change..
  • From: ECMnut@aol.com
• Re: big inch SBC EFI intake mainfold
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: big inch SBC EFI intake mainfold
  • From: ECMnut@aol.com
• Re: big inch SBC EFI intake mainfold
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: big inch SBC EFI intake mainfold
  • From: ECMnut@aol.com
• Re: Injector Duty cycle calculations
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: big inch SBC EFI intake mainfold
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Considering Injector Change..
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: big inch SBC EFI intake mainfold
  • From: garwillis@msn.com (Garfield Willis)
• RE: Injector Duty cycle calculations
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: big inch SBC EFI intake mainfold
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Injector Duty cycle calculations
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: big inch SBC EFI intake mainfold
  • From: Mike Rolica <mrolica@meridian-mag.com>
• FS: TIF 1500 Printer/scanner
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: Injector Duty cycle calculations
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Injector Duty cycle calculations
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Injector Duty cycle calculations
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Injector Duty cycle calculations
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: the 9th injector...
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: Injector Duty cycle calculations
  • From: "Bruce Plecan" <nacelp@bright.net>
• Kwarm Kickdown Enabled??
  • From: Gabe <gellett@earthlink.net>
• RE: Injector Duty cycle calculations
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: big inch SBC
  • From: KasaRyan@aol.com
• Re: Injector Duty cycle calculations
  • From: "Bruce Plecan" <nacelp@bright.net>
• 2-Bar 730/AUJP
  • From: Squash <realsquash@yahoo.com>
• RE: Injector Duty cycle calculations
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Kwarm Kickdown Enabled??
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 2-Bar 730/AUJP
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: Kwarm Kickdown Enabled??
  • From: garwillis@msn.com (Garfield Willis)
• Re: 2-Bar 730/AUJP
  • From: Gabe <gellett@earthlink.net>
• RE: Considering Injector Change..
  • From: "the Fredericks" <fredericksk@worldnet.att.net>
• Re: sbc in place of lt1
  • From: Hotrodderzzz@aol.com
• Re: 2-Bar 730/AUJP
  • From: Squash <realsquash@yahoo.com>
• Re: sbc in place of lt1
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Kwarm Kickdown Enabled??
  • From: garwillis@msn.com (Garfield Willis)
• Re: Injector Duty cycle calculations
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: sbc in place of lt1
  • From: Chipsbyal@aol.com
• Re: sbc in place of lt1
  • From: Len Sabatine <sabatine@epix.net>
• Re: Injector Duty cycle calculations
  • From: "Jeff M" <tystorm@email.msn.com>
• 2 Questions
  • From: "Rodney Fulk" <elixir@pathwaynet.com>
• Re: 2 Questions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: sbc in place of lt1
  • From: romans@starstream.net (Romans, Mark)
• 1228707 ECM
  • From: Bob Valentine <bob@tecmark.com>
• Re: 2 Questions
  • From: John_Calabrese@ENGELHARD.COM
• Re: Considering Injector Change..
  • From: ECMnut@aol.com
• Re: 2 Questions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 2 Questions
  • From: Len Sabatine <sabatine@epix.net>
• Re: sbc in place of lt1
  • From: Len Sabatine <sabatine@epix.net>
• Re: 2 Questions
  • From: Len Sabatine <sabatine@epix.net>
• Re: more details sbc in place of lt1
  • From: Hotrodderzzz@aol.com
• Re: more details sbc in place of lt1
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: more details sbc in place of lt1
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: sbc in place of lt1
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: more details sbc in place of lt1
  • From: Scott & Jennifer Peitzsch <jlg-sep@mediaone.net>
• Re: more details sbc in place of lt1
  • From: Len Sabatine <sabatine@epix.net>
• ARCHIVES
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: more details sbc in place of lt1
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: more details sbc in place of lt1
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: Was Chip carrier now sockets
  • From: steve ravet <sravet@arm.com>
• Re: more details sbc in place of lt1
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Injector R+R
  • From: steve ravet <sravet@arm.com>
• Re: more details sbc in place of lt1
  • From: Len Sabatine <sabatine@epix.net>
• Distrib needed
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: more details sbc in place of lt1
  • From: garwillis@msn.com (Garfield Willis)
• Re: ARCHIVES
  • From: garwillis@msn.com (Garfield Willis)
• Re: more details sbc in place of lt1
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: more details sbc in place of lt1
  • From: bcroe@juno.com
• Re: Len Sabatine optispark to sbc
  • From: Hotrodderzzz@aol.com
• Re: more details sbc in place of lt1
  • From: garwillis@msn.com (Garfield Willis)
• Re: more details sbc in place of lt1
  • From: Len Sabatine <sabatine@epix.net>
• Re: more details sbc in place of lt1
  • From: Len Sabatine <sabatine@epix.net>
• Re: more details sbc in place of lt1
  • From: garwillis@msn.com (Garfield Willis)
• Re: Len Sabatine optispark to sbc
  • From: Len Sabatine <sabatine@epix.net>
• Re: more details sbc in place of lt1
  • From: garwillis@msn.com (Garfield Willis)
• RE: Considering Injector Change..
  • From: "the Fredericks" <fredericksk@worldnet.att.net>
• turbo wastegate solenoid and MAP sensor
  • From: "NickG" <nikog@mediaone.net>
• EEPROM Code gurus
  • From: "John T. Martin" <gm.man@gte.net>
• Re: turbo wastegate solenoid and MAP sensor
  • From: "Green" <green@nlenx.com>
• Re: more details sbc in place of lt1
  • From: Shannen Durphey <shannen@grolen.com>
• Re: more details sbc in place of lt1
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Opti musings... (was Re: more details sbc in place of lt1)
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Was Chip carrier now sockets
  • From: "Edward J. Malkiewicz" <krazyed@worldnet.att.net>
• Re: Considering Injector Change..
  • From: ECMnut@aol.com
• Re: EEPROM Code gurus
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: more details sbc in place of lt1
  • From: Len Sabatine <sabatine@epix.net>
• Re: Injector R+R
  • From: Bob Valentine <bob@tecmark.com>
• Re: more details sbc in place of lt1
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Injector R+R
  • From: Kevin Crain <warpten@warpten.com>
• RE: Distrib needed
  • From: Don.F.Broadus@ucm.com
• Re: turbo wastegate solenoid and MAP sensor
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• 305 TPI bins
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: more details sbc in place of lt1
  • From: Len Sabatine <sabatine@epix.net>
• Re: 305 TPI bins
  • From: Gabe <gellett@earthlink.net>
• Re: 305 TPI bins
  • From: Chipsbyal@aol.com
• Re: turbo wastegate solenoid and MAP sensor
  • From: "Tim De Coster" <craz1@softhome.net>
• RE: 305 TPI bins
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: 305 TPI bins
  • From: Len Sabatine <sabatine@epix.net>
• 747 Rom Emulator / status
  • From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
• Re: 747 Rom Emulator / status
  • From: steve ravet <sravet@arm.com>
• Re: 2-Bar 730/AUJP
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: 747 Rom Emulator / status
  • From: "Programmer" <nwester@eidnet.org>
• Re: 2-Bar 730/AUJP
  • From: Squash <realsquash@yahoo.com>
• Re: 2-Bar 730/AUJP
  • From: ECMnut@aol.com
• Up-n-running...
  • From: Shannen Durphey <shannen@grolen.com>
• RE: 747 Rom Emulator / design
  • From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
• RE: 747 checksum
  • From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
• Re: more details sbc in place of lt1
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Up-n-running...
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 747 Rom Emulator / design
  • From: steve ravet <sravet@arm.com>
• Re: Up-n-running...
  • From: John_Calabrese@ENGELHARD.COM
• Re: Up-n-running...
  • From: ECMnut@aol.com
• Re: 747 Rom Emulator / design
  • From: Steven Ciciora <ciciora@Ciciora.com>
• Re: Up-n-running...
  • From: Len Sabatine <sabatine@epix.net>
• Re: 747 Rom Emulator / design
  • From: Len Sabatine <sabatine@epix.net>
• RE: 747 Rom Emulator / design
  • From: Eric Aos <EOA@spartek.com>
• RE: 747 Rom Emulator / design
  • From: Steven Ciciora <ciciora@Ciciora.com>
• RE: 747 Rom Emulator / design
  • From: Squash <realsquash@yahoo.com>
• Re: 747 Rom Emulator / design
  • From: thergen@svn.net
• RE: 747 Rom Emulator / design
  • From: Pat Ford <pford@qnx.com>
• Nitrous Explosion
  • From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
• RE: 747 Rom Emulator / design
  • From: Eric Aos <EOA@spartek.com>
• Re: Nitrous Explosion
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: Nitrous Explosion
  • From: Rick Lindstedt <rick@mafb.org>
• Re: Nitrous Explosion
  • From: "Chris Bennight" <Christopher_Bennight@baylor.edu>
• Re: Nitrous Explosion
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Nitrous Explosion
  • From: Rick Lindstedt <rick@mafb.org>
• RE: Nitrous Explosion
  • From: "Michael Adams" <michaeladams1@compuserve.com>
• Re: Nitrous Explosion
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: 747 Rom Emulator / design
  • From: rr <RRauscher@nni.com>
• Re: Nitrous Explosion
  • From: rr <RRauscher@nni.com>
• Re: 747 Rom Emulator / design
  • From: rr <RRauscher@nni.com>
• RE: Nitrous Explosion
  • From: Len Sabatine <sabatine@epix.net>
• Re: 747 Rom Emulator / design
  • From: Steven Ciciora <ciciora@Ciciora.com>
• Re: 747 Rom Emulator / status
  • From: Bill Shaw <bshaw@connix.com>
• Re: Up-n-running...
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Up-n-running...
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 747 Rom Emulator / design
  • From: steve ravet <sravet@arm.com>
• Re: Up-n-running...
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 747 checksum
  • From: "Programmer" <nwester@eidnet.org>
• 730 to Nissan
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 747 Rom Emulator / design
  • From: rr <RRauscher@nni.com>
• Re: 747 Rom Emulator / design
  • From: rr <RRauscher@nni.com>
• Re: 747 checksum
  • From: rr <RRauscher@nni.com>
• Re: Up-n-running...vortec heads
  • From: KasaRyan@aol.com
• Hello and help please
  • From: "David Posea" <dposea@mindspring.com>
• Re: 747 Rom Emulator / status
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Diferent emulator projects
  • From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
• Re: Nitrous Explosion
  • From: Pat Ford <pford@qnx.com>
• Re: Hello and help please
  • From: Len Sabatine <sabatine@epix.net>
• Re: Hello and help please
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Nitrous Explosion
  • From: Don.F.Broadus@ucm.com
• Re: 747 checksum
  • From: "Programmer" <nwester@eidnet.org>
• RE: Hello and help please
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Hello and help please
  • From: "David Posea" <dposea@mindspring.com>
• Re: 747 Rom Emulator / design
  • From: Steven Ciciora <ciciora@Ciciora.com>
• Re: Nitrous Explosion
  • From: "Jeff Flanary" <jefff@mounet.com>
• RE: Nitrous Explosion
  • From: Don.F.Broadus@ucm.com
• Re: Nitrous Explosion
  • From: bearbvd@cmn.net (Greg Hermann)
• RE: Nitrous Explosion
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: 747 Rom Emulator / design
  • From: rrauscher@nni.com
• BCC for Chips
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: Nitrous Explosion
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BCC for Chips
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Nitrous Explosion
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• RE: Nitrous Explosion
  • From: Len Sabatine <sabatine@epix.net>
• Re: Hello and help please
  • From: Len Sabatine <sabatine@epix.net>
• Re: Nitrous Explosion
  • From: Len Sabatine <sabatine@epix.net>
• Writting to memcals
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Hello and help please
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: Hello and help please
  • From: "David Posea" <dposea@mindspring.com>
• Re: Hello and help please
  • From: "David Posea" <dposea@mindspring.com>
• Re: Nitrous Explosion
  • From: garwillis@msn.com (Garfield Willis)
• RE: Writting to memcals
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Writting to memcals
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Writting to memcals
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Nitrous Explosion
  • From: "Jeff Flanary" <jefff@mounet.com>
• RE: Nitrous Explosion
  • From: Don.F.Broadus@ucm.com
• Re: Hello and help please
  • From: Len Sabatine <sabatine@epix.net>
• Memcal needed
  • From: Tedscj@aol.com
• ECM Identification
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: ECM Identification
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ECM Identification
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: ECM Identification
  • From: Shannen Durphey <shannen@grolen.com>
• Re: ECM Identification
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Memcal needed
  • From: Shannen Durphey <shannen@grolen.com>
• Re: ECM Identification
  • From: "TK" <terryk@foothill.net>
• Re: 747 Rom Emulator / design
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Memcal needed
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Memcal needed
  • From: Tedscj@aol.com
• Re: Memcal needed
  • From: Chipsbyal@aol.com
• Re: Memcal needed
  • From: "David Posea" <dposea@mindspring.com>
• hotter plugs on hopped rebuild
  • From: "lpwcruzr" <lpwcruzr@netzero.net>
• Re: hotter plugs on hopped rebuild
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: Nitrous Explosion
  • From: garwillis@msn.com (Garfield Willis)
• Bon Voyage, maties
  • From: garwillis@msn.com (Garfield Willis)
• Re: hotter plugs on hopped rebuild
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Memcal needed
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Memcal needed
  • From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
• ecm upgrade
  • From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
• Re: hotter plugs on hopped rebuild
  • From: "gene l. clifford" <genelc@idworld.net>
• Re: hotter plugs on hopped rebuild
  • From: "Programmer" <nwester@eidnet.org>
• Re: hotter plugs on hopped rebuild
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: hotter plugs on hopped rebuild
  • From: Len Sabatine <sabatine@epix.net>
• Re: Memcal needed
  • From: Len Sabatine <sabatine@epix.net>
• Re: Writting to memcals
  • From: ECMnut@aol.com
• Re: Writting to memcals
  • From: ECMnut@aol.com
• Re: ECM Identification
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• TPI/SFI article
  • From: "Thomas Matthews" <tmatthew@stny.rr.com>
• Re: TPI/SFI article
  • From: Kevin Crain <kevin@warpten.com>
• Re: hotter plugs on hopped rebuild
  • From: Shannen Durphey <shannen@grolen.com>
• Re: TPI/SFI article
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: hotter plugs on hopped rebuild
  • From: "alexpeper" <alexpeper@email.msn.com>
• Can a GM ECM be tuned
  • From: "David Posea" <dposea@mindspring.com>
• Re: TPI/SFI article
  • From: garwillis@msn.com (Garfield Willis)
• Up-n-running, pt 2
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Up-n-running, pt 2
  • From: "Thomas Matthews" <tmatthew@stny.rr.com>
• Re: hotter plugs on hopped rebuild
  • From: ECMnut@aol.com
• Re: hotter plugs on hopped rebuild
  • From: ECMnut@aol.com
• Re: alternate plugs for al heads
  • From: KasaRyan@aol.com
• Re: Injector R+R
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Up-n-running, pt 2
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Can a GM ECM be tuned
  • From: David Cooley <n5xmt@triad.rr.com>
• TBI Fuel Pressure
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: Can a GM ECM be tuned
  • From: "David Posea" <dposea@mindspring.com>
• RE: Engine light on getting code 12
  • From: "Jim Sloan" <leroy@sunflower.com>
• Re: Engine light on getting code 12
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Can a GM ECM be tuned
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: TBI Fuel Pressure
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Can a GM ECM be tuned
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: Can a GM ECM be tuned
  • From: "David Posea" <dposea@mindspring.com>
• Re: Can a GM ECM be tuned
  • From: "David Posea" <dposea@mindspring.com>
• Engine light on getting code 12
  • From: Keith <kgil1@tampabay.rr.com>
• Re: Can a GM ECM be tuned
  • From: ECMnut@aol.com
• Re: Can a GM ECM be tuned
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: Can a GM ECM be tuned
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Engine light on getting code 12
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Engine light on getting code 12
  • From: Keith <kgil1@tampabay.rr.com>
• EPROM SIMULATOR
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Engine light on getting code 12
  • From: Keith <kgil1@tampabay.rr.com>
• Re: Writting to memcals
  • From: rr <RRauscher@nni.com>
• Re: Engine light on getting code 12
  • From: Keith <kgil1@tampabay.rr.com>
• Re: Can a GM ECM be tuned
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: Can a GM ECM be tuned
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: Can a GM ECM be tuned
  • From: "Dave & Irina Eicher" <sailors@mwci.net>
• RE: Nitrous Explosion
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: hotter plugs on hopped rebuild
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Writting to memcals
  • From: David Cooley <n5xmt@triad.rr.com>
• RE: Engine light on getting code 12
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Can a GM ECM be tuned
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• Re: Nitrous Explosion
  • From: garwillis@msn.com (Garfield Willis)
• 1971/350 C10 EFI question
  • From: Paul Beam <pbeam@elkproducts.com>
• Re: 1971/350 C10 EFI question
  • From: KasaRyan@aol.com
• Re: 1971/350 C10 EFI question
  • From: steve ravet <sravet@arm.com>
• Odp: Can a GM ECM be tuned
  • From: "Marek" <elemark@priv4.onet.pl>
• Re: TBI Fuel Pressure
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: Engine light on getting code 12
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 1971/350 C10 EFI question
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 1971/350 C10 EFI question
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 1971/350 C10 EFI question
  • From: "Bruce Plecan" <nacelp@bright.net>
• re-calibration software
  • From: "Phil Rickard" <vettebuilder@skyenet.net>
• Re: re-calibration software
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: re-calibration software
  • From: "Phil Rickard" <vettebuilder@skyenet.net>
• Bendix efi
  • From: "Phil Rickard" <vettebuilder@skyenet.net>
• Re: Bendix efi
  • From: bcroe@juno.com
• Male 12 PIN ALDL
  • From: "black maj" <blackmin@hotmail.com>
• Re: big inch SBC EFI intake mainfold
  • From: Tom Sharpe <twsharpe@mtco.com>
• Re: Male 12 PIN ALDL
  • From: Peter Gargano <peter@techedge.com.au>
• Re: Male 12 PIN ALDL
  • From: "black maj" <blackmin@hotmail.com>
• RE: big inch SBC EFI intake mainfold
  • From: "the Fredericks" <fredericksk@worldnet.att.net>
• Re: big inch SBC EFI intake mainfold
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: big inch SBC EFI intake mainfold
  • From: "Bruce Plecan" <nacelp@bright.net>
• Ecu Identification needed.
  • From: Richard Wakeling <kojab@ar.com.au>
• Re: Ecu Identification needed.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Ecu Identification needed.
  • From: steve ravet <sravet@arm.com>
• 2732 and 2732A programming Q's
  • From: "Craig Marcho" <not_valid_email@airmail.net>
• Re: more details sbc in place of lt1
  • From: Scott Knight <scott@scottknight.com>
• Re: 2732 and 2732A programming Q's
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: more details sbc in place of lt1
  • From: Len Sabatine <sabatine@epix.net>
• Re: more details sbc in place of lt1
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 2732 and 2732A programming Q's
  • From: Len Sabatine <sabatine@epix.net>
• GM calibration stuff
  • From: "Bruce Plecan" <nacelp@bright.net>
• GM 8-Pin Module
  • From: WEG1192@aol.com
• Re: GM calibration stuff
  • From: John_Calabrese@ENGELHARD.COM
• Re: more details sbc in place of lt1
  • From: Scott Knight <scott@scottknight.com>
• Re: more details sbc in place of lt1
  • From: Scott Knight <scott@scottknight.com>
• Re: GM 8-Pin Module
  • From: steve ravet <sravet@arm.com>
• Bin Library
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: GM calibration stuff
  • From: "Gregg Gruen" <gruegre@hotmail.com>
• Re: Bin Library
  • From: "Programmer" <nwester@eidnet.org>
• methanol/ethanol/gas 730/727 bins
  • From: mswayze@truswood.com (Mike Swayze)
• EPROM Programming
  • From: WEG1192@aol.com
• Re: Bin Library
  • From: rweatherford@mindspring.com
• RE: EPROM Programming
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: ECM Identification
  • From: Ludis Langens <ludis@cruzers.com>
• Re: EPROM Programming
  • From: "David Posea" <dposea@mindspring.com>
• Re: ecm upgrade
  • From: Ludis Langens <ludis@cruzers.com>
• Re: EPROM Programming
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM Programming
  • From: "David Posea" <dposea@mindspring.com>
• Re: 747 Rom Emulator / design
  • From: Ludis Langens <ludis@cruzers.com>
• Re: EPROM Programming
  • From: rr <RRauscher@nni.com>
• Re: EPROM Programming
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM Programming
  • From: Shannen Durphey <shannen@grolen.com>
• Re: EPROM Programming
  • From: "David Posea" <dposea@mindspring.com>
• Re: EPROM Programming
  • From: "David Posea" <dposea@mindspring.com>
• Re: GM calibration stuff
  • From: romans@starstream.net (Romans, Mark)
• Re: EPROM Programming
  • From: WEG1192@aol.com
• Re: EPROM Programming
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM Programming
  • From: WEG1192@aol.com
• Re: EPROM Programming
  • From: romans@starstream.net (Romans, Mark)
• Re: EPROM Programming
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM Programming
  • From: WEG1192@aol.com
• Re: Was Chip carrier now sockets
  • From: Ludis Langens <ludis@cruzers.com>
• Re: EPROM Programming
  • From: romans@starstream.net (Romans, Mark)
• Re: EPROM Programming
  • From: WEG1192@aol.com
• Re: 747 Rom Emulator / design
  • From: thergen@svn.net
• Fuel Hoses, Found
  • From: Bob Valentine <bob@tecmark.com>
• Re: Fuel Hoses, Found
  • From: WEG1192@aol.com
• Off.. questions too basic?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: EPROM Programming
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Fuel Hoses, Found
  • From: Shannen Durphey <shannen@grolen.com>
• Re: ECM Identification
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• RE: EPROM Programming
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: EPROM Programming
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: EPROM Programming
  • From: Mike Rolica <mrolica@meridian-mag.com>
• archives slim efi content
  • From: mswayze@truswood.com (Mike Swayze)
• EPROM in place of BPROM
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: FPGA pricing
  • From: Marc Randolph <mrand@pobox.com>
• Re: FPGA pricing
  • From: Len Sabatine <sabatine@epix.net>
• BFTP on 16191947, and 7730 for auction
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: EPROM Programming
  • From: romans@starstream.net (Romans, Mark)
• Re: EPROM Programming
  • From: Len Sabatine <sabatine@epix.net>
• Re: EPROM Programming
  • From: Len Sabatine <sabatine@epix.net>
• Re: archives slim efi content
  • From: steve ravet <sravet@arm.com>
• Re: GM calibration stuff (college comp.)
  • From: "Gregg Gruen" <gruegre@hotmail.com>
• Re: EPROM Programming
  • From: "David Posea" <dposea@mindspring.com>
• Re: EPROM Programming
  • From: WEG1192@aol.com
• Re: EPROM Programming
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM Programming
  • From: WEG1192@aol.com
• Re: EPROM Programming
  • From: Shannen Durphey <shannen@grolen.com>
• ADLD Data Stream Info Required
  • From: Peter Gargano <peter@techedge.com.au>
• Re: ADLD Data Stream Info Required
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ADLD Data Stream Info Required
  • From: Peter Gargano <peter@techedge.com.au>
• Re: EPROM Programming
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Fuel Hoses, Found
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: Fuel Hoses, Found
  • From: "Bruce Plecan" <nacelp@bright.net>
• Kit Car Mag SFI
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: Fuel Hoses, Found
  • From: Shannen Durphey <shannen@grolen.com>
• Re: EPROM Programming
  • From: WEG1192@aol.com
• Re: EPROM Programming
  • From: "David Posea" <dposea@mindspring.com>
• Re: EPROM Programming
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM Programming
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM Programming
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Fuel Hoses, Found
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: EPROM Programming
  • From: romans@starstream.net (Romans, Mark)
• Re: EPROM Programming
  • From: Shannen Durphey <shannen@grolen.com>
• Re: EPROM Programming
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Fuel Hoses, Found
  • From: "Jim Yeagley" <jyeag@core.com>
• Re: EPROM Programming
  • From: Len Sabatine <sabatine@epix.net>
• Re: EPROM Programming
  • From: Len Sabatine <sabatine@epix.net>
• Re: EPROM Programming
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: ADLD Data Stream Info Required
  • From: Peter Gargano <peter@techedge.com.au>
• Re: Fuel Hoses, Found
  • From: rr <RRauscher@nni.com>
• Re: EPROM Programming
  • From: "Programmer" <nwester@eidnet.org>
• Re: EPROM Programming
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: EPROM Programming
  • From: rr <RRauscher@nni.com>
• BCC help
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM Programming
  • From: "David Posea" <dposea@mindspring.com>
• Re: BLM cell boundaries, Was: EPROM Programming
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: EPROM Programming
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: ADLD Data Stream Info Required
  • From: "Peter D. Hipson" <mail@darkstar.mv.com>
• Re: Fuel Hoses, Found
  • From: steve ravet <sravet@arm.com>
• Re: BCC help
  • From: steve ravet <sravet@arm.com>
• Re: BCC help
  • From: WEG1192@aol.com
• Re: BCC help
  • From: Shannen Durphey <shannen@grolen.com>
• 90 or 91 Corvette wiring diagram
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: 90 or 91 Corvette wiring diagram
  • From: Shannen Durphey <shannen@grolen.com>
• 747 crossfire conversion question.
  • From: "Kevin R" <KEReyn@gte.net>
• Re: 747 crossfire conversion question.
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 747 crossfire conversion question.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BCC help
  • From: "Rob Higgins" <rhiggins@cavva.com.au>
• archive location (was: Fuel Hoses, Found)
  • From: Glen Beard <gbeard1@nycap.rr.com>
• WBO2 question NTK box
  • From: Carl Summers <InTech@writeme.com>
• Re: 747 crossfire conversion question.
  • From: "Kevin R" <KEReyn@gte.net>
• Re: 747 crossfire conversion question.
  • From: WEG1192@aol.com
• RE: 747 crossfire conversion question.
  • From: Carl Summers <InTech@writeme.com>
• RE: BCC help
  • From: Carl Summers <InTech@writeme.com>
• Re: 747 crossfire conversion question.
  • From: WEG1192@aol.com
• RE: 747 crossfire conversion question.
  • From: Carl Summers <InTech@writeme.com>
• Re: 747 crossfire conversion question.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 747 crossfire conversion question.
  • From: Shannen Durphey <shannen@grolen.com>
• Re: archive location (was: Fuel Hoses, Found)
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 747 crossfire conversion question.
  • From: rr <RRauscher@nni.com>
• Re: BLM cell boundaries, Was: EPROM Programming
  • From: rr <RRauscher@nni.com>
• EFI Pow wow
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 747 crossfire conversion question.
  • From: Shannen Durphey <shannen@grolen.com>
• Spark Plug Analysis
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 747 crossfire conversion question.
  • From: WEG1192@aol.com
• Re: 747 crossfire conversion question.
  • From: "Kevin R" <KEReyn@gte.net>
• Re: 747 crossfire conversion question.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 747 crossfire conversion question.
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM Programmer
  • From: WEG1192@aol.com
• Re: 747 crossfire conversion question.
  • From: "David Posea" <dposea@mindspring.com>
• RE: 747 crossfire conversion question.
  • From: thergen@svn.net
• NTK o2 sensor identification
  • From: "Phil Rickard" <vettebuilder@skyenet.net>
• Re: 747 Rom Emulator / design
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: NTK o2 sensor identification
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 2000 Archives?
  • From: WEG1192@aol.com
• Off Topic: How to manually solder SMD chips?
  • From: "Jose Carlos Felicio Rublescki" <rublesck@portoweb.com.br>
• Re: NTK o2 sensor identification
  • From: "Phil Rickard" <vettebuilder@skyenet.net>
• BCC DAs
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: NTK o2 sensor identification
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: backward injektors??
  • From: Shannen Durphey <shannen@grolen.com>
• Re: backward injektors??
  • From: "David Posea" <dposea@mindspring.com>
• Re: BCC help
  • From: WEG1192@aol.com
• Re: BCC help
  • From: Shannen Durphey <shannen@grolen.com>
• Re: BCC help
  • From: Shannen Durphey <shannen@grolen.com>
• Re: BCC help
  • From: "Shawn R. Lin" <slin01@mail.orion.org>
• Re: EPROM tuning head start
  • From: WEG1192@aol.com
• Re: BCC help
  • From: WEG1192@aol.com
• Re: BCC help
  • From: Ludis Langens <ludis@cruzers.com>
• Re: BCC help
  • From: Shannen Durphey <shannen@grolen.com>
• Re: BCC help
  • From: Shannen Durphey <shannen@grolen.com>
• RE: BLM cell boundaries, Was: EPROM Programming
  • From: Mika.Helander@softbit.fi
• Re: NTK o2 sensor identification
  • From: "Phil Rickard" <vettebuilder@skyenet.net>
• Re: EPROM tuning head start
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: backward injektors??
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: backward injektors??
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Spark Plug Analysis
  • From: John_Calabrese@ENGELHARD.COM
• Re: Spark Plug Analysis
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BCC help
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Spark Plug Analysis
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: BCC help
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: 747 Rom Emulator / design
  • From: "Daniel N" <gmecu@hotmail.com>
• Re: Spark Plug Analysis
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: BCC help
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: BCC help
  • From: "Bruce Plecan" <nacelp@bright.net>
• Macintosh Scantool Software...
  • From: reizner@enteract.com
• Re: BCC help
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: BCC help
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Spark Plug Analysis
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Spark Plug Analysis
  • From: John_Calabrese@ENGELHARD.COM
• 1227747 question
  • From: "Jeff Kopp" <superchevyparts@mindspring.com>
• Re: Spark Plug Analysis
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: 1227747 question
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: 1227747 question
  • From: "Jeff Kopp" <superchevyparts@mindspring.com>
• pollution control device was :Re: Spark Plug Analysis
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: BCC help
  • From: Shannen@grolen.com
• Re: 747 Rom Emulator / design
  • From: rr <RRauscher@nni.com>
• Re: Macintosh Scantool Software...
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: 1227747 question
  • From: rr <RRauscher@nni.com>
• Pin functions determined by PROM?
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: 1227747 question
  • From: Richard Wakeling <kojab@ar.com.au>
• 4L60e transmission question
  • From: "Marvin Johnson" <Wdnbtbldr@proaxis.com>
• Re: Pin functions determined by PROM?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Injector sizes / Rover 3.5 efi conversion
  • From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
• Re: 747 Rom Emulator / design
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Injector sizes / Rover 3.5 efi conversion
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 747 Rom Emulator / design
  • From: "Bruce Plecan" <nacelp@bright.net>
• Test Only.
  • From: Richard Wakeling <kojab@zxmail.com>
• Re: Injector sizes / Rover 3.5 efi conversion
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Pin functions determined by PROM?
  • From: "Jeremy Gonyou" <jgonyou@hotmail.com>
• Re: Injector sizes / Rover 3.5 efi conversion
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Pin functions determined by PROM?
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: tbi identified/ Injector sizes / Rover 3.5 efi conversion
  • From: Shannen Durphey <shannen@grolen.com>
• Re: EPROM tuning head start
  • From: "NickG" <nikog@mediaone.net>
• Re: Injector opening time
  • From: bcroe@juno.com
• Re: pollution control device was :Re: Spark Plug Analysis
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: EPROM tuning head start
  • From: WEG1192@aol.com
• Re: 747 Rom Emulator / design
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Pin functions determined by PROM?
  • From: Ludis Langens <ludis@cruzers.com>
• Re: EPROM tuning head start
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM tuning head start
  • From: WEG1192@aol.com
• RE: EPROM tuning head start
  • From: Carl Summers <InTech@writeme.com>
• RE: tbi identified/ Injector sizes / Rover 3.5 efi conversion
  • From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
• Re: EPROM tuning head start
  • From: Shannen Durphey <shannen@grolen.com>
• Re: EPROM tuning head start
  • From: Shannen Durphey <shannen@grolen.com>
• Re: EPROM tuning head start
  • From: WEG1192@aol.com
• Re: EPROM tuning head start
  • From: WEG1192@aol.com
• Re: tbi identified/ Injector sizes / Rover 3.5 efi conversion
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Injector opening time
  • From: "Mike" <kswayze@bellsouth.net>
• Re: tbi identified/ Injector sizes / Rover 3.5 efi conversion
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 747 Rom Emulator / design
  • From: Steve Lamb <lambsr@optushome.com.au>
• Re: EPROM tuning head start
  • From: "NickG" <nikog@mediaone.net>
• RE: EPROM Programming
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: backward injektors??
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Injector sizes / Rover 3.5 efi conversion
  • From: steve ravet <sravet@arm.com>
• RE: EPROM Programming
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: EPROM tuning head start
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: big inch SBC EFI intake mainfold
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Injector opening time
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: backward injektors??
  • From: Len Sabatine <sabatine@epix.net>
• RE: big inch SBC EFI intake mainfold
  • From: Len Sabatine <sabatine@epix.net>
• RE: big inch SBC EFI intake mainfold
  • From: Squash <realsquash@yahoo.com>
• Re: Injector opening time
  • From: Frank F Parker <fparker@umich.edu>
• Re: Injector opening time
  • From: rrauscher@nni.com
• Re: EPROM tuning head start
  • From: WEG1192@aol.com
• RE: Off Topic: How to manually solder SMD chips?
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Off Topic: How to manually solder SMD chips?
  • From: Matt S Bower <m.s.bower@cummins.com>
• Re: Off Topic: How to manually solder SMD chips?
  • From: Andrew Mattei <amattei@mindspring.com>
• RE: Off Topic: How to manually solder SMD chips?
  • From: Marc Piccioni <piccioni@cadvision.com>
• Re: Off Topic: How to manually solder SMD chips?
  • From: Pat Ford <pford@qnx.com>
• Re: Off Topic: How to manually solder SMD chips?
  • From: steve ravet <sravet@arm.com>
• Re: Off Topic: How to manually solder SMD chips?
  • From: "Swayze" <kswayze@bellsouth.net>
• RE: Off Topic: How to manually solder SMD chips?
  • From: Steven Ciciora <ciciora@Ciciora.com>
• Re: Injector opening time
  • From: rr <RRauscher@nni.com>
• Changing PROM w/ batt connected
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: Changing PROM w/ batt connected
  • From: JTesta1966@aol.com
• Re: Off Topic: How to manually solder SMD chips?
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: big inch SBC EFI intake mainfold
  • From: WEG1192@aol.com
• Re: Was Chip carrier now sockets
  • From: Steven Ciciora <ciciora@Ciciora.com>
• Re: Injector opening time
  • From: Peter Gargano <peter@techedge.com.au>
• Re: Changing PROM w/ batt connected
  • From: rr <RRauscher@nni.com>
• Bin Library
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Was Chip carrier now sockets
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Bin Library
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: Bin Library
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: ECMs interchangable?
  • From: WEG1192@aol.com
• Re: Bin Library
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Bin Library
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE ecm upgrade
  • From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
• RE bcc help
  • From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
• Re: Was Chip carrier now sockets
  • From: steve ravet <sravet@arm.com>
• Re: Bin Library
  • From: "Jeff Kopp" <jkopp@direcpc.com>
• Re: ECMs interchangable?
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Was Chip carrier now sockets
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: big inch SBC EFI intake mainfold
  • From: "Phil Rickard" <vettebuilder@skyenet.net>
• Re: big inch SBC EFI intake mainfold
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: RE bcc help
  • From: Ludis Langens <ludis@cruzers.com>
• Re: RE bcc help
  • From: ECMnut@aol.com
• Re: Injector opening time
  • From: bcroe@juno.com
• Re: big inch SBC EFI intake mainfold
  • From: "Phil Rickard" <vettebuilder@skyenet.net>
• Re: Was Chip carrier now sockets
  • From: "TK" <terryk@foothill.net>
• Re: Injector opening time
  • From: "Mike" <kswayze@bellsouth.net>
• Re: Was Chip carrier now sockets
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Injector opening time
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: big inch SBC EFI intake mainfold
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Bin Library
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Injector opening time
  • From: "Swayze" <kswayze@bellsouth.net>
• RE: Was Chip carrier now sockets
  • From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
• bcc decodes please
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Re: big inch SBC EFI intake mainfold
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: bcc decodes please
  • From: Pat Ford <pford@qnx.com>
• Re: bcc decodes please
  • From: Michael Davis <davis@mail.eecis.udel.edu>
• Re: bcc decodes please
  • From: "Jeff Kopp" <superchevyparts@mindspring.com>
• TBI flow rate data clips from DIY-EFI
  • From: "Fran and Bud" <quest100@gte.net>
• Re: bcc decodes please
  • From: Pat Ford <pford@qnx.com>
• Flex hoses for TBI's
  • From: "Fran and Bud" <quest100@gte.net>
• Factory no VATS chip ?
  • From: "Programmer" <nwester@eidnet.org>
• RE: Factory no VATS chip ?
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Flex hoses for TBI's
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• RE: TBI flow rate data clips from DIY-EFI
  • From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
• Re: ADLD Data Stream Info Required
  • From: Peter Gargano <peter@techedge.com.au>
• Re: Injector opening time
  • From: rr <RRauscher@nni.com>
• Re: RE ecm upgrade
  • From: rr <RRauscher@nni.com>
• Re: EPROM tuning head start
  • From: Shannen Durphey <shannen@grolen.com>
• Re: EPROM tuning head start
  • From: WEG1192@aol.com
• Re: EPROM tuning head start
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Off Topic: How to manually solder SMD chips?
  • From: Orin <orin>
• laptop scantool.
  • From: "Gregg Gruen" <gruegre@hotmail.com>
• Re: RE ecm upgrade
  • From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
• ECM calibrations for upgraded Xfire
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: ECM calibrations for upgraded Xfire
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re:Off Topic: How to manually solder SMD chips?
  • From: Dig <turbodig@yahoo.com>
• 7747calibrations
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: ECM calibrations for upgraded Xfire
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: ECM calibrations for upgraded Xfire
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: EPROM tuning head start
  • From: Ludis Langens <ludis@cruzers.com>
• RE: ECM calibrations for upgraded Xfire
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: laptop scantool.
  • From: ECMnut@aol.com
• 165 connectors
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: laptop scantool.
  • From: Chipsbyal@aol.com
• Re: ECM calibrations for upgraded Xfire
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: ECM calibrations for upgraded Xfire
  • From: "Dominic Sorresso" <surrexi2@home.com>
• RE: ECM calibrations for upgraded Xfire
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: ECM calibrations for upgraded Xfire
  • From: "Dominic Sorresso" <surrexi2@home.com>
• RE: ECM calibrations for upgraded Xfire
  • From: Mike Rolica <mrolica@meridian-mag.com>
• single vs double batch fire
  • From: "NickG" <nikog@mediaone.net>
• RE: ECM calibrations for upgraded Xfire
  • From: Gorden Jennings <gjennings@extremenetworks.com>
• Ford Codes
  • From: Gabe <gellett@earthlink.net>
• posting methods...
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Ford Codes
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: single vs double batch fire
  • From: romans@starstream.net (Romans, Mark)
• RE: Ford Codes
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: single vs double batch fire
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: ECM calibrations for upgraded Xfire
  • From: "Bruce Plecan" <nacelp@bright.net>
• hp-48G --slim efi content
  • From: mswayze@truswood.com (Mike Swayze)
• Re: ECM calibrations for upgraded Xfire
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: big inch SBC EFI intake mainfold
  • From: Scott Knight <scott@scottknight.com>
• Re: ECM calibrations for upgraded Xfire
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Return Receipt
  • From: Thomas McCabe <mccabet@mediaone.net>
• Re: big inch SBC EFI intake mainfold
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ECM calibrations for upgraded Xfire
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ECM calibrations for upgraded Xfire
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: big inch SBC EFI intake mainfold
  • From: Scott Knight <scott@scottknight.com>
• 1227747 question
  • From: Shannen@grolen.com
• Re: big inch SBC EFI intake mainfold
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ECM calibrations for upgraded Xfire
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: ECM calibrations for upgraded Xfire
  • From: Steven Ciciora <ciciora@Ciciora.com>
• Re: big inch SBC EFI intake mainfold
  • From: Scott Knight <scott@scottknight.com>
• Using the GMECM List - was Re: ECM calibr..
  • From: Peter Gargano <peter@techedge.com.au>
• Re: ECM calibrations for upgraded Xfire
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: ECM calibrations for upgraded Xfire
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: big inch SBC EFI intake mainfold
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Injector Duty cycle calculations
  • From: Scott Knight <scott@scottknight.com>
• Re: Using the GMECM List - was Re: ECM calibr..
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ECM calibrations for upgraded Xfire
  • From: "Bruce Plecan" <nacelp@bright.net>
• Help! Peak-hold injector driver design
  • From: "Lou" <lfaustini@atlantech.net>
• Re: Haltech E6GM Questions
  • From: WEG1192@aol.com
• ignition module
  • From: chetwagner@uswest.net
• Re: Haltech E6GM Questions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: single vs double batch fire
  • From: romans@starstream.net (Romans, Mark)
• Re: ignition module
  • From: "Bruce Plecan" <nacelp@bright.net>
• Editing proms
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: BCC help again
  • From: WEG1192@aol.com
• RE: ignition module
  • From: Carl Summers <InTech@writeme.com>
• Re: BCC help again
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Editing proms
  • From: "JN" <jwn@sgi.net>
• Re: Injector Duty cycle calculations
  • From: timsiford@hushmail.com
• Cold 350 TBI
  • From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
• RE: single vs double batch fire
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Editing proms
  • From: timsiford@hushmail.com
• Re: Editing proms
  • From: "Jeff Kopp" <superchevyparts@mindspring.com>
• Re: Editing proms
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Cold 350 TBI
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Editing proms
  • From: "Craig Marcho" <not_valid_email@airmail.net>
• Re: Editing proms
  • From: "Thomas Matthews" <tmatthew@stny.rr.com>
• Re: ECM calibrations for upgraded Xfire
  • From: "Dominic Sorresso" <surrexi2@home.com>
• GMEPro was Re: Editing proms
  • From: Rick Lindstedt <rick@mafb.org>
• Re: Editing proms
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Cold 350 TBI
  • From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
• Re: Editing proms
  • From: "JN" <jwn@sgi.net>
• RE: big inch SBC EFI intake mainfold
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• RE: Editing proms
  • From: "Marteney, Steven J." <smarteney@xlvision.com>
• Re: Editing proms
  • From: timsiford@hushmail.com
• Re: Cold 350 TBI
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: Editing proms
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: Editing proms
  • From: "Craig Marcho" <not_valid_email@airmail.net>
• RE: Editing proms
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Help! Peak-hold injector driver design
  • From: steve ravet <sravet@arm.com>
• Re: Cold 350 TBI
  • From: Andrew Mattei <amattei@mindspring.com>
• Re: Editing proms
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Cold 350 TBI
  • From: "Bruce Plecan" <nacelp@bright.net>
• looking for a bin
  • From: Pat Ford <pford@qnx.com>
• RE: Cold 350 TBI
  • From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
• Re: looking for a bin
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Editing proms
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: looking for a bin
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Editing proms
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: looking for a bin
  • From: Pat Ford <pford@qnx.com>
• Re: Editing proms (editorial)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Shorty plugs (off topic)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: looking for a bin
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: looking for a bin
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Editing proms
  • From: JTesta1966@aol.com
• Shorty plugs (off topic)
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Editing proms (editorial)
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: Editing proms (editorial)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: looking for a bin
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Shorty plugs (off topic)
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Cold 350 TBI
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Editing proms (editorial)
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: hp-48G --slim efi content
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: GMEPro was Re: Editing proms
  • From: Shannen Durphey <shannen@grolen.com>
• Re: hp-48G --slim efi content
  • From: "TK" <terryk@foothill.net>
• Gmepro
  • From: "TK" <terryk@foothill.net>
• Re: Editing proms (editorial)
  • From: "Kevin R" <KEReyn@gte.net>
• Re: Gmepro
  • From: "black maj" <blackmin@hotmail.com>
• Some basic questions, please read
  • From: "JN" <jwn@sgi.net>
• Re: Some basic questions, please read
  • From: "Andrew K. Mattei" <amattei@mindspring.com>
• MAF and 89 Vet stuff
  • From: romans@starstream.net (Romans, Mark)
• Re: Shorty plugs (off topic)
  • From: "Dave Zug" <dzug@delanet.com>
• Re: hp-48G --slim efi content
  • From: "Mike" <kswayze@bellsouth.net>
• Re: Gmepro
  • From: "Mike" <kswayze@bellsouth.net>
• Re: MAF and 89 Vet stuff
  • From: "TK" <terryk@foothill.net>
• Re: MAF and 89 Vet stuff
  • From: romans@starstream.net (Romans, Mark)
• Re: MAF and 89 Vet stuff
  • From: romans@starstream.net (Romans, Mark)
• Re: Ported MAF
  • From: WEG1192@aol.com
• Re: Ported MAF
  • From: Ken Kelly <PCMdoc@surfree.com>
• Re: Bin Library
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: Pin functions determined by PROM?
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: Gmepro
  • From: Richard Wakeling <kojab@ar.com.au>
• Re: Pin functions determined by PROM?
  • From: "D. Barry Stubbs" <z24man@earthlink.net>
• Re: MAF and 89 Vet stuff
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Ported MAF
  • From: Carl Summers <InTech@writeme.com>
• Re: Ported MAF
  • From: romans@starstream.net (Romans, Mark)
• Re: Dual EGT on Ebay
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Ported MAF
  • From: Carl Summers <InTech@writeme.com>
• Re: MAF and 89 Vet stuff
  • From: Shannen Durphey <shannen@grolen.com>
• RE: MAF and 89 Vet stuff
  • From: "J. T. Spilman" <jtstexas@home.com>
• Dual EGT on Ebay
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Dual EGT on Ebay(LINK)
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Gmepro
  • From: "Ross Myers" <ponty@axis.jeack.com.au>
• Re: Gmepro
  • From: "TK" <terryk@foothill.net>
• Re: Gmepro
  • From: "TK" <terryk@foothill.net>
• Re: Editing proms (editorial)
  • From: Ludis Langens <ludis@cruzers.com>
• RE: Editing proms (editorial)
  • From: Carl Summers <InTech@writeme.com>
• Re: MAF and 89 Vet stuff
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Ported MAF
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: Ported MAF
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Ported MAF
  • From: Peter Gargano <peter@techedge.com.au>
• Re: MAF and 89 Vet stuff
  • From: "NickG" <nikog@mediaone.net>
• Re: MAF and 89 Vet stuff
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: Bin Library
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: Gmepro
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: MAF and 89 Vet stuff
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Bin Library
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Ported MAF
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: MAF and 89 Vet stuff
  • From: romans@starstream.net (Romans, Mark)
• Re: MAF and 89 Vet stuff
  • From: romans@starstream.net (Romans, Mark)
• Re: MAF and 89 Vet stuff
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 7730 ECM and Holley Projection
  • From: WEG1192@aol.com
• Re: MAF and 89 Vet stuff
  • From: "Dan Townsend" <xybertron@cox-internet.com>
• Re: Gmepro
  • From: "TK" <terryk@foothill.net>
• Re: Gmepro
  • From: "TK" <terryk@foothill.net>
• Re: 1227747 question
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: MAF and 89 Vet stuff
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: 7730 ECM and Holley Projection
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: MAF and 89 Vet stuff
  • From: romans@starstream.net (Romans, Mark)
• Re: MAF and 89 Vet stuff
  • From: "Bruce Plecan" <nacelp@bright.net>
• Vortec Throttle Body
  • From: "Jeff Kopp" <jkopp@direcpc.com>
• Re: MAF and 89 Vet stuff
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: 7730 ECM and Holley Projection
  • From: KasaRyan@aol.com
• MEFI Controller
  • From: romans@starstream.net (Romans, Mark)
• Re: MEFI Controller
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 7730 ECM and Holley Projection
  • From: ECMnut@aol.com
• Re: MAF and 89 Vet stuff
  • From: Shannen Durphey <shannen@grolen.com>
• Re: MAF and 89 Vet stuff
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Vortec Throttle Body
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Editing proms (editorial)
  • From: "Kevin R" <KEReyn@gte.net>
• Re: MEFI Controller
  • From: Shannen Durphey <shannen@grolen.com>
• Re: MEFI Controller
  • From: Shannen Durphey <shannen@grolen.com>
• Re: MEFI Controller
  • From: Shannen Durphey <shannen@grolen.com>
• Re: ECM 1228746 Help
  • From: WEG1192@aol.com
• Re: Vortec Throttle Body
  • From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
• VETTE Communication Problem.
  • From: John Smith <kojab@zxmail.com>
• 2 Bar map sensor and 730 BIN
  • From: timsiford@hushmail.com
• Re: Help! Peak-hold injector driver design
  • From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
• Re: Vortec Throttle Body
  • From: "Jeff Kopp" <superchevyparts@mindspring.com>
• Re: Vortec Throttle Body
  • From: "Jeff Kopp" <superchevyparts@mindspring.com>
• Re: Vortec Throttle Body
  • From: ECMnut@aol.com
• Re: Vortec Throttle Body
  • From: "Jeff Kopp" <superchevyparts@mindspring.com>
• Re: MAF and 89 Vet stuff
  • From: "JN" <jwn@sgi.net>
• VETTE Communication Problem.
  • From: Richard Wakeling <kojab@ar.com.au>
• 1227165 CTS trouble
  • From: John Bachman <jdbachman@redrose.net>
• Re: 1227165 CTS trouble
  • From: "Bruce Plecan" <nacelp@bright.net>
• TPS boosters?
  • From: "Thomas Matthews" <tmatthew@stny.rr.com>
• Re: 1227165 CTS trouble
  • From: Chipsbyal@aol.com
• Re: TPS boosters?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: TPS boosters?
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: TPS boosters?
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: Re: TPS boosters?
  • From: rweatherford@mindspring.com
• Off idle transistions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1227165 CTS trouble
  • From: Peter Gargano <peter@techedge.com.au>
• Re: 1227165 CTS trouble
  • From: Chipsbyal@aol.com
• Re: 1227165 CTS trouble
  • From: Len Sabatine <sabatine@epix.net>
• Leading guestions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Leading guestions
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 1227165 CTS trouble
  • From: Peter Gargano <peter@techedge.com.au>
• RE: MAF and 89 Vet stuff
  • From: Carl Summers <InTech@writeme.com>
• Re: 1227165 CTS trouble
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Leading guestions+1
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: Leading guestions
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Leading guestions+1
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Leading guestions+1
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Leading guestions+1
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Leading guestions
  • From: "Bruce Plecan" <nacelp@bright.net>
• ALDL European version
  • From: "Bert de Boer" <bert@autotaal.nl>
• She's alive
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: She's alive
  • From: JTesta1966@aol.com
• Re: ALDL European version
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: MAF and 89 Vet stuff
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: Off idle transistions
  • From: "Dominic Sorresso" <surrexi2@home.com>
• RE: She's alive
  • From: Mike Rolica <mrolica@meridian-mag.com>
• FW: question
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: She's alive
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: She's alive
  • From: Gorden Jennings <gjennings@extremenetworks.com>
• Re: She's alive
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: She's alive
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: FW: question
  • From: chetwagner@uswest.net
• Re: Off idle transistions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: ALDL European version
  • From: "alexpeper" <alexpeper@email.msn.com>
• Rich in closed loop idle
  • From: "JN" <jwn@sgi.net>
• O2 threads
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: O2 threads
  • From: Matt S Bower <m.s.bower@cummins.com>
• RE: O2 threads
  • From: Carl Summers <InTech@writeme.com>
• Re: O2 threads
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: O2 threads
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: O2 threads
  • From: bearbvd@cmn.net (Greg Hermann)
• Re: O2 threads
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: ALDL European version
  • From: Peter Gargano <peter@techedge.com.au>
• RE: O2 threads
  • From: "J. T. Spilman" <jtstexas@home.com>
• Re: ALDL European version
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: O2 threads
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Off idle transistions
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Off idle transistions
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: Off idle transistions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: O2 threads
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Off idle transistions
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: O2 threads
  • From: Scott Lundahl <scott@lumenetics.com>
• Re: ALDL European version
  • From: Peter Gargano <peter@techedge.com.au>
• Plug Reading
  • From: "Bruce Plecan" <nacelp@bright.net>
• RE: O2 threads
  • From: Squash <realsquash@yahoo.com>
• RE: O2 threads
  • From: Squash <realsquash@yahoo.com>
• RE: O2 threads
  • From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
• Re: Tuning Eproms (was ECM 1228746 Help)
  • From: WEG1192@aol.com
• Re: O2 threads
  • From: Peter Gargano <peter@techedge.com.au>
• RE: Injector sizes / Rover 3.5 efi conversion
  • From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
• 4wd range selector / vss in 747 application
  • From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
• Re: ALDL European version
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: Injector sizes / Rover 3.5 efi conversion
  • From: "phil" <phil@muts.freeserve.co.uk>
• Re: Tuning Eproms (was ECM 1228746 Help)
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Injector sizes / Rover 3.5 efi conversion
  • From: "Mike" <kswayze@bellsouth.net>
• Re: 4wd range selector / vss in 747 application
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 4wd range selector / vss in 747 application
  • From: "Bruce Plecan" <nacelp@bright.net>
• Fw: Rich in closed loop idle
  • From: "JN" <jwn@sgi.net>
• Re: Tuning Eproms (was ECM 1228746 Help)
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Fw: Rich in closed loop idle
  • From: JTesta1966@aol.com
• RE: Plug Reading
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: O2 threads
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: O2 threads
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Plug Reading
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Fw: Rich in closed loop idle
  • From: "JN" <jwn@sgi.net>
• RE: Plug Reading
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Plug Reading
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: She's alive
  • From: DC Smith <morepoweral@tetranet.net>
• Re: Off idle transistions
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: Plug Reading
  • From: "Bruce Plecan" <nacelp@bright.net>
• 305 TPI 4 Sale
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: She's alive
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Plug Reading
  • From: Ernst denBroeder <edenbroe@cisco.com>
• Re: Plug Reading
  • From: "Dominic Sorresso" <surrexi2@home.com>
• RE: Plug Reading
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Plug Reading
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Plug Reading
  • From: Len Sabatine <sabatine@epix.net>
• Re: Plug Reading
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Plug Reading
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: Mercury balancing
  • From: KasaRyan@aol.com
• RE: Plug Reading
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Plug Reading
  • From: "Rudi M. Machilek" <rmachilek@nc.rr.com>
• Tuning Tips questions
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: Plug Reading
  • From: "Bruce Plecan" <nacelp@bright.net>
• Fuel injector cleaning system?
  • From: Gabe <gellett@earthlink.net>
• Odp: ALDL European version
  • From: "Marek" <elemark@priv4.onet.pl>
• Re: Tuning Tips questions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Plug Reading
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Plug Reading
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Plug Reading
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Ford injectors
  • From: Eric Norgard <eric@aztek-eng.com>
• Re: Plug Reading
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Plug Reading
  • From: "Swayze" <kswayze@bellsouth.net>
• Fw: Rich in closed loop idle (3rd post)
  • From: "JN" <jwn@sgi.net>
• Re: Ford injectors
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Off idle transistions
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Tuning Tips questions
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: Off idle transistions
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: Off idle transistions
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Ford injectors
  • From: "Dan Townsend" <xybertron@cox-internet.com>
• Re: Ford injectors
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: Tuning Tips questions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Off idle transistions
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: Fuel injector cleaning system?
  • From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
• Re: Ford injectors
  • From: WEG1192@aol.com
• RE: Ford injectors
  • From: "Craig Marcho" <marcho@flash.net>
• Re: Mercury balancing
  • From: Barry Tisdale <btisdale@cybersol.com>
• Re: Ford injectors
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: Tuning Tips questions
  • From: "Dominic Sorresso" <surrexi2@home.com>
• RE: Plug Reading
  • From: Len Sabatine <sabatine@epix.net>
• Re: Plug Reading
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Fuel injector cleaning system?
  • From: Gabe <gellett@earthlink.net>
• Re: Ford injectors
  • From: "Dan Townsend" <xybertron@cox-internet.com>
• Re: Leading guestions+1
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Ford injectors
  • From: timsiford@hushmail.com
• Re: Ford injectors
  • From: timsiford@hushmail.com
• RE: Mercury balancing
  • From: "Rudi M. Machilek" <rmachilek@nc.rr.com>
• Re: 2 Bar map sensor and 730 BIN
  • From: timsiford@hushmail.com
• Re: ALDL European version
  • From: "alexpeper" <alexpeper@email.msn.com>
• Re: Mercury balancing
  • From: "Swayze" <kswayze@bellsouth.net>
• Re: 2 Bar map sensor and 730 BIN
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: Ford injectors
  • From: "JN" <jwn@sgi.net>
• Re: Ford injectors
  • From: Bob Valentine <bob@tecmark.com>
• Odp: ALDL European version
  • From: "Marek" <elemark@priv4.onet.pl>
• Re: Ford injectors
  • From: "Dan Townsend" <xybertron@cox-internet.com>
• Re: turbo manifolds, (was 2 Bar map sensor and 730 BIN)
  • From: "Jim Yeagley" <jyeag@core.com>
• Re: Ford injectors
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Ford injectors
  • From: Rick Lindstedt <rick@mafb.org>
• Re: Ford injectors
  • From: Kevin Crain <warpten@warpten.com>
• Re: Ford injectors
  • From: Rick Lindstedt <rick@mafb.org>
• Re: Ford injectors
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Ford injectors
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Ford injectors
  • From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
• Re: Ford injectors
  • From: Kevin Crain <warpten@warpten.com>
• Re: 4wd range selector / vss in 747 application
  • From: "Programmer" <nwester@eidnet.org>
• Re: Ford injectors
  • From: Len Sabatine <sabatine@epix.net>
• Re: Ford injectors
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Ford injectors
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: 4wd range selector / vss in 747 application
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Ford injectors
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Ford injectors
  • From: "NickG" <nikog@mediaone.net>
• 7730/ANHT code problem
  • From: chetwagner@uswest.net
• Re: 7730/ANHT code problem
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 7730/ANHT code problem
  • From: romans@starstream.net (Romans, Mark)
• Re: 7730/ANHT code problem
  • From: Peter Gargano <peter@techedge.com.au>
• Re: 7730/ANHT code problem
  • From: chetwagner@uswest.net
• Re: Ford injectors (& Question)
  • From: romans@starstream.net (Romans, Mark)
• RE: 7730/ANHT code problem
  • From: "Gorden Jennings" <gjennings@ixpres.com>
• teknickle difikulty
  • From: Carl Summers <InTech@writeme.com>
• Re: Ford injectors (& Question)
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: Ford injectors (& Question)
  • From: "Dave Zug" <dzug@delanet.com>
• Re: Ford injectors (& Question)
  • From: Mark <jamesc@venturalink.net>
• Re: 7730/ANHT code problem
  • From: Ludis Langens <ludis@cruzers.com>
• RE: Ford injectors (& Question)
  • From: Carl Summers <InTech@writeme.com>
• Re: Editing proms (editorial)
  • From: Ludis Langens <ludis@cruzers.com>
• Re: teknickle difikulty
  • From: Shannen Durphey <shannen@grolen.com>
• RE: teknickle difikulty
  • From: Carl Summers <InTech@writeme.com>
• RE: Ford injectors
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: 7730/ANHT code problem
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: teknickle difikulty
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: Ford injectors (& Question)
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: teknickle difikulty
  • From: JTesta1966@aol.com
• Re: Tweaking fueling values.
  • From: "phil" <phil@muts.freeserve.co.uk>
• Odp: Leading guestions+1
  • From: "Marek" <elemark@priv4.onet.pl>
• Injectors and AFPR
  • From: Aaron G Kallotte <akallotte@juno.com>
• Re: Editing proms (editorial)
  • From: "Kevin R" <KEReyn@gte.net>
• Re: Tweaking fueling values.
  • From: "Dave Zug." <dzug@delanet.com>
• RE: Injectors and AFPR
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: teknickle difikulty
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Injectors and AFPR
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Injectors and AFPR
  • From: Squash <realsquash@yahoo.com>
• Re: teknickle difikulty V6
  • From: Chipsbyal@aol.com
• Re: Injectors and AFPR
  • From: "Dan Townsend" <xybertron@cox-internet.com>
• Re: Ford injectors (& Question)
  • From: "Dave Zug." <dzug@delanet.com>
• PROMEDIT
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Injectors and AFPR
  • From: "Dave Zug." <dzug@delanet.com>
• Re: PROMEDIT
  • From: Squash <realsquash@yahoo.com>
• RE: PROMEDIT
  • From: Mike Rolica <mrolica@meridian-mag.com>
• RE: PROMEDIT
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Injectors and AFPR
  • From: "Dominic Sorresso" <surrexi2@home.com>
• gmecm oN 383 mopar
  • From: BBBDLGCON@aol.com
• Re: teknickle difikulty
  • From: "Dominic Sorresso" <surrexi2@home.com>
• Re: teknickle difikulty
  • From: "Walter Sherwin" <wsherwin@home.com>
• Re: Injectors and AFPR
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: teknickle difikulty
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Odp: Leading guestions+1
  • From: jamesc@venturalink.net
• Re: Odp: Leading guestions+1
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Ford injectors (& Question)
  • From: Roger Heflin <rah@horizon.hit.net>
• Re: 4wd range selector / vss in 747 application
  • From: "Programmer" <nwester@eidnet.org>
• Re: Closed Loop Disable
  • From: WEG1192@aol.com
• Re: GMEpro question
  • From: WEG1192@aol.com
• Re: Odp: Leading guestions+1
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 4wd range selector / vss in 747 application
  • From: Shannen Durphey <shannen@grolen.com>
• Re: PROMEDIT
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: 4wd range selector / vss in 747 application
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 4wd range selector / vss in 747 application
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 4wd range selector / vss in 747 application
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: GMEpro question
  • From: "Bruce Plecan" <nacelp@bright.net>
• 4L60e
  • From: Brent Obermiller <ober_b@sssnet.com>
• Re: teknickle difikulty
  • From: KasaRyan@aol.com
• Re: Fuel injector cleaning system?
  • From: Qeskimeaux@aol.com
• Re: Closed Loop Disable
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Closed Loop Disable
  • From: ECMnut@aol.com
• Re: Editing proms (editorial)
  • From: ECMnut@aol.com
• Re: Editing proms (editorial)
  • From: ECMnut@aol.com
• Re: Editing proms (editorial)
  • From: "Kevin R" <KEReyn@gte.net>
• newby
  • From: "Andrew Plunkett" <aplunkett@home.com>
• Re: Editing proms (editorial)
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Ford injectors (& Question)
  • From: "Dave Zug" <dzug@delanet.com>
• Re: newby
  • From: "Bruce Plecan" <nacelp@bright.net>
• SBC TPI
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: newby
  • From: bearbvd@cmn.net (Greg Hermann)
• TPI
  • From: "Bruce Plecan" <nacelp@bright.net>
• 1226519 ECM
  • From: Louis Baiani <neptilou@attcanada.net>
• Re: 4L60e
  • From: Len Sabatine <sabatine@epix.net>
• Re: 1226519 ECM
  • From: ECMnut@aol.com
• Re: Fuel injector cleaning system?
  • From: Len Sabatine <sabatine@epix.net>
• Re: Fuel injector cleaning system?
  • From: Shannen Durphey <shannen@grolen.com>
• Re: GMEpro question
  • From: Len Sabatine <sabatine@epix.net>
• Re: newby
  • From: "Andrew Plunkett" <aplunkett@home.com>
• Re: newby
  • From: "Andrew Plunkett" <aplunkett@home.com>
• Re: newby
  • From: KasaRyan@aol.com
• Re: GMEpro question
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Fuel injector cleaning system?
  • From: Len Sabatine <sabatine@epix.net>
• Old
  • From: "Gerald Pelnar" <wd0fyf@mpks.net>
• Re: Old
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: newby
  • From: "Bruce Plecan" <nacelp@bright.net>
• Clarification on Memcal issues
  • From: Tedscj@aol.com
• Re: newby
  • From: Shannen Durphey <shannen@grolen.com>
• 16183247
  • From: "Programmer" <nwester@eidnet.org>
• Re: Old
  • From: "Programmer" <nwester@eidnet.org>
• 02 Voltage Calculation
  • From: Berg Family <rgberg@srv.net>
• Re: Clarification on Memcal issues
  • From: Scot Sealander <Sealand@clarityconnect.com>
• Re: Old
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: newby
  • From: "Andrew Plunkett" <aplunkett@home.com>
• Re: Fuel injector cleaning system?
  • From: Qeskimeaux@aol.com
• Re: newby
  • From: "Andrew Plunkett" <aplunkett@home.com>
• Re: newby
  • From: "Andrew Plunkett" <aplunkett@home.com>
• RPM limit on 94-95 LT1 pcm's
  • From: "Chris Bennight" <Christopher_Bennight@baylor.edu>
• Re: 1226519 ECM
  • From: Ludis Langens <ludis@cruzers.com>
• Re: 02 Voltage Calculation
  • From: Ludis Langens <ludis@cruzers.com>
• Re: newby
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: newby
  • From: "Andrew Plunkett" <aplunkett@home.com>
• '749 questions
  • From: Bill Shaw <bshaw@connix.com>
• Re: '749 questions
  • From: Shannen Durphey <shannen@grolen.com>
• Re: Old
  • From: "Bruce Plecan" <nacelp@bright.net>
• Needed to measure AFR
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Old
  • From: "Programmer" <nwester@eidnet.org>
• Re: Needed to measure AFR
  • From: bearbvd@cmn.net (Greg Hermann)
• Prom image to .ecu
  • From: "Andrew Plunkett" <aplunkett@home.com>
• Re: newby
  • From: "Andrew Plunkett" <aplunkett@home.com>
• 332 Stim board - was '749 questions
  • From: Peter Gargano <peter@techedge.com.au>
• Re: newby
  • From: Ludis Langens <ludis@cruzers.com>
• Re: Prom image to .ecu
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: newby
  • From: Ludis Langens <ludis@cruzers.com>
• a/f ratio, conventional engines
  • From: Frank F Parker <fparker@umich.edu>
• reprogramming '747 limp home mode
  • From: "NickG" <nikog@mediaone.net>
• Re: 02 Voltage Calculation
  • From: "Dan Plaskett" <dynastydan@worldnet.att.net>
• Re: Needed to measure AFR
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 1226519 ECM
  • From: Louis Baiani <neptilou@attcanada.net>
• Digest Format?
  • From: Scott Lundahl <scott@lumenetics.com>
• C3 series or '7747 ECM for port fuel injection?
  • From: Scott Lundahl <scott@lumenetics.com>
• Re: C3 series or '7747 ECM for port fuel injection?
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 16183247
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: 16183247
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: 16183247
  • From: David Cooley <n5xmt@triad.rr.com>
• RamJet 350 spec/install instructions
  • From: "Jeff Kopp" <jkopp@direcpc.com>
• 89 YB vs FB Prom Problem with AC
  • From: romans@starstream.net (Romans, Mark)
• Re: 89 YB vs FB Prom Problem with AC
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 89 YB vs FB Prom Problem with AC
  • From: "Dan Townsend" <xybertron@cox-internet.com>
• Fuel filter # found...
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 332 Stim board - was '749 questions
  • From: Bill Shaw <bshaw@connix.com>
• Re: GMEpro question
  • From: WEG1192@aol.com
• Re: 332 Stim board - was '749 questions
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Fuel filter # found...
  • From: Bob Valentine <bob@tecmark.com>
• ALDL info for 84 TBI Vette
  • From: Louis Baiani <neptilou@attcanada.net>
• Plug colors
  • From: "Bruce Plecan" <nacelp@bright.net>
• Re: Fuel filter # found...
  • From: "Jeff Kopp" <jkopp@direcpc.com>
• Re: 16183247
  • From: "Programmer" <nwester@eidnet.org>
• Re: 16183247
  • From: "Programmer" <nwester@eidnet.org>
• Re: 16183247
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: 16183247
  • From: "Programmer" <nwester@eidnet.org>
• Re: 16183247
  • From: David Cooley <n5xmt@triad.rr.com>
• Re: Fuel filter # found...
  • From: Shannen Durphey <shannen@grolen.com>
• Re: 16183247
  • From: "Programmer" <nwester@eidnet.org>
• too much timing - past 45 crank degrees
  • From: KasaRyan@aol.com
• Re: 16183247
  • From: Ludis Langens <ludis@cruzers.com>
• Re: ALDL info for 84 TBI Vette
  • From: Ludis Langens <ludis@cruzers.com>
• Re: GMEpro question
  • From: Ludis Langens <ludis@cruzers.com>
• Re: reprogramming '747 limp home mode
  • From: Ludis Langens <ludis@cruzers.com>
• Re: ALDL info for 84 TBI Vette
  • From: "TK" <terryk@foothill.net>
• I finally took the leap - general tuning questions
  • From: KasaRyan@aol.com
• baffling turbo..
  • From: Mike Rolica <mrolica@meridian-mag.com>
• Re: Dual injector select on crossfire injection.
  • From: "Kevin Reynolds" <kereyn@gte.net>
• Re: vortec distributor pn 1104051
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: another Memcal ?
  • From: "Thomas Matthews" <tmatthew@stny.lrun.com>
• Re: 1227165.. apyu bcc HELP!
  • From: "Clive Apps Techno-Logicals 416 510 0020" <clive@problem.org>
• Re: Freighting an engine.
  • From: "Clive Apps Techno-Logicals 416 510 0020" <clive@problem.org>
• Re: Freighting an engine.
  • From: "Clive Apps Techno-Logicals 416 510 0020" <clive@problem.org>
• MC6803U4 info?
  • From: "Daniel R. Henriksson" <rotax@ludd.luth.se>
• Re: MC6803U4 info?
  • From: "Daniel R. Henriksson" <rotax@ludd.luth.se>