Re: LT1 files ?

[Len Sabatine <sabatine@epix.net>]

    Yep , additional pin on '95 serves dual duty [ Functions] A4 or M6
     Depending on which SW is in place.
     Len

>I found out the external harness is different too when I converted from
>4L60E to a t56 in my 94.  The pin for this is used for the reverse lockout
>in m6 applications, but was not even wired on the pcm connector on my 94
>A4 harness.
>
>Eric
>
>------
>94 Trans Am GT M6 - !A4, !CAT, !EGR, !AIR, 300+, LS1 Brakes
>66 Impala LT1-A4 - !fuel system
>
>On Mon, 10 Jul 2000, Len Sabatine wrote:
>
> >      '95  has PWM capable Pump + Internal harness is different than '94,
> >       and SAE J1962 [ 16 pin ]  DLC in '95 F Bodys. No Prob for folks
> >       AWARE of mixing  incompatible HW - SW . The changes on the run
> >      can bite where it hurts, not to mention  a screen full of DTCs or 
> History
> >      Code DTCs.
> >        Len
>