[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 165 ECM question, "single fire" vs "double fire"
- To: gmecm@diy-efi.org
- Subject: Re: 165 ECM question, "single fire" vs "double fire"
- From: Rick Lindstedt <rick@mafb.org>
- Date: Fri, 05 May 2000 12:12:05 -0400
Michael Davis wrote:
>My reading of the code is that unless single-fire mode is turned
>on by bit1 of address 0xC014, that double fire mode will be the
>default.. In the ARAP base I use, bit1 is turned off and double-fire
>inj settings should be used..
Yep..in my 89 vette code base that I use... the double-fire is defaulted...
Rick