[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Turbo Tuning
At 10:05 PM 4/18/00, you wrote:
>I need to correct myself on the turbo rating, it is LB/MIN (use to injector
>ratings ;-). Now, most guys ask what PSI I run, that is not a good
>indicator of power making. Then they ask what CFM, not the best rating yet
>but closer. The best way to rate a turbo's potential to start is by mass
>air, i.e. LB/MIN or pounds of air flow per minute. At Garrett's web sight,
>they rate their turbos by Compressor Flow LB/MIN and all those values you
>indicate come up with this and the map, as you know ;-). I hope that helps?
>
Makes Mucho sense now!
===========================================================
David Cooley N5XMT Internet: N5XMT@bellsouth.net
Packet: N5XMT@KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
We are Borg... Prepare to be assimilated!
===========================================================