Re: lb/hr calculation in ERROR (TunerCat vs. WinBin)

[rr <RRauscher@nni.com>]

I was playing with this and found the same thing. The way the .ecu file parsing
is setup, you can't do this complex an equation. The best that can be done is to
put the factor in for a secs/gms entry: 0.00078125, the inverse of 1280.

BobR.

Squash wrote:

> Well it isn't winbin, it's the ECU file your using.  Whoever created that file did simple math to
> find the multiplier that is in there and only tested it on 22 #/hr, and that's why it works with
> that.  I don't think you can just use a simple multiplier like someone stated, the aujp wants
> sec/gram, not grams/sec.  Hence, 1/(#hr/3600*453.59237)*1280 is what you need.  For 22.1#/hr, it
> comes out to 459.67 (460).
>
> Squash
>
> --- trax <trax@frederickmd.com> wrote:
> > Guys,
> >
> > There HAS to be a discrepency between using WinBin with the 7730v3.ecu file
> > and using TunerCats.
> >

> <snip>