[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Saturn stuff
If it's done the same way as it is here, then you use a program on the CD
rom (called TIS - Technical Information System) to download the bin file
into the Tech1/2, and then you use the Tech1/2 to send the bin to the ECU.
However, you need to know a dealer password (or key) to get into the bit of
the TIS program that downloads the code into the Tech1.
Cheers,
Malcolm Robb LC 0112G
-----Original Message-----
From: Chipsbyal@aol.com [SMTP:Chipsbyal@aol.com]
Sent: Tuesday, July 18, 2000 2:28 PM
To: gmecm@diy-efi.org
Subject: Re: Saturn stuff
If the cd is anything like the GM cd, all the calibrations are zipped and
just partial
files. There is no complete bin files in there. You need to know more about
how the software is transfered to the vehicle. Is a Tech2 used or is it
piped
directly to the car?