Re: 2 Bar map sensor and 730 BIN

[timsiford@hushmail.com]

--Hushpart_boundary_VlzagqPUGltSnuRSRcWhSQAmscJDIFtQ
Content-type: text/plain

John,

Thanks for the update.  I am hoping to use your modifications when I supercharge 
(or turbocharge) my car.  I'd love to got the dual turbo route but the Gale 
Banks turbo manifolds are impossible to find :-(

Tim

At Thu, 17 Aug 2000 10:28:17 -0400, "John S. Gwynne" <jsg@jsgpc.mrcday.com> 
wrote:

>
>
>
>| I believe somebody here modified the 730bin for use with a 2 bar map 
>(i.e. 
>| supercharged applications).  Any and all info concerning this bin,
> where 
>| it is located, and the modifications surrounding the conversion to 
>the bin 
>| for the 2bar map would be greatly appreciated.  
>
>
>yes, it at <ftp://jsgpc.mrcday.com/pub/gmecm/axxc.S_032000> and 
>axxc.bin_032000. 
>
>It currently only reports MAP over 1-bar for recording through the
>aldl and changes the way BARO is calculated. I was traveling the week
>before last and worked a couple of evenings on incorporating MAP over
>1-bar into the fuel and spark tables... all in time....
>
>john gwynne
>
>--------------------------------------------------------------------

>
--Hushpart_boundary_VlzagqPUGltSnuRSRcWhSQAmscJDIFtQ--


IMPORTANT NOTICE:  If you are not using HushMail, this message could have been read easily by the many people who have access to your open personal email messages.
Get your FREE, totally secure email address at http://www.hushmail.com.