[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

'727/'730 v-8 .bin EGR

To: <gmecm@diy-efi.org>
Subject: '727/'730 v-8 .bin EGR
From: "Swayze" <kswayze@bellsouth.net>
Date: Mon, 7 Feb 2000 22:10:42 -0500

In looking at the various pinouts for '727 and '730 applications I noticed that the v-8 '730 app has an EGR solenoid(aujp.bin?) and was wondering in using a '727 with aujp.bin where this 'pin' would be? the '727 I have been reviewing have been for 3.1L (digital egr)and 2.5L (vacuum egr?). I would like to be able to 'switch on/off ' a vacuum controlled EGR. I checked Ludis pages but did not see EGR as one of the pinouts. Is there a significant difference in the pinouts for a '727 v-8  vs. a '730 v-8 aside from the obvious connector differences? off to the archives........
byE
Mike
Swayze
mswayze@truswood.com
kswayze@bellsouth.net

Prev by Date: RE: DP Ram Emulator...
Next by Date: Re: 88 TBI issue
Previous by thread: Disassembler info: (was Syclone bin)
Next by thread: Re: '727/'730 v-8 .bin EGR
Index(es):
- Date
- Thread