Re: Heat crazed mad scientist

["Bruce Plecan" <nacelp@bright.net>]

Seen em in fuel cells, radiators, radiator hoses (like the old COs Pellet
guns used), under seats, behind false bulkheads, hollowed out batteries, and
a couple really hard to find places <g>...
   Also is just easier getting it near the air filter rather then ducting to
the manifold.
Bruce



> > There is a machinist here(the best in town) that does something to
carbs.
> He
> > won't tell you what and during tech tear down it is invisible(it is
> illegal
> > in roundy round racin')but it makes a big differance. Has something to
do
> > with smoothing the surfaces, thats all he will tell you.
> > "if ya ain't cheatin', ya ain't tryin'"
>
> Yea, rounding the surfaces of the little NOS bottle installed in the
valley
> pan ;-) I've seen nos bottles in the gas tank, but never one in the valley
> pan he hee.
>
> >
> > Btw the same guy builds remote control cars that run 60+ miles per hour
> > using weed eater engines. He wins every race without fail!
>
> I had an ELECTRIC RC car that we clocked at 65 mph in a bronco. 8 cells
and
> a small DC motor. clean and green ;-) it used 96-strand 10 guage wire and
> rechargable matched-cells that put out 1.55vdc each, 3000MaH packs.
> www.towerhobbies.com
>
>

>