Re: V6 ALDL Communications

["Ross Myers" <ponty@axis.jeack.com.au>]

>I'm fairly certain that
>the car is looking for a 3.9 k resistor.  However when I set my cable to
>such the car goes beserk!  3000 rpm idle.  Codes 33 and 35, and still no
>data.  The car will barely run with this resitor!


I don't know what is going on Jeremy, but I've seen this with my 83 T/A,
I've had Diacom on this car a few times and after several minutes the car
idles at 2500RPM!!.
Pull the cable out and it's fine?.

Ross Myers