[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Closed Loop Disable
In a message dated 8/18/00 8:19:35 PM Eastern Daylight Time, WEG1192@aol.com
writes:
<<
How do you get the ECM to not use closed loop without a scanner? I
disconnected the O2 sensor but was told that that would put the ECM into
limp
home mode, not open loop. My understanding was that if the ECM did not get
the O2 cross counts, that it would stay in open loop.
>>
Find the "closed loop enable temp" and max it out. (FF)
HTH, Mike V