[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: O2 threads
I believe they are 18x1.5 mm. This is also a standard oil pan drain plug
size; I used a "replacement" drain plug from the local auto parts place to
fill the extra O2 bung on my exhaust system. Works great (even came with a
copper crush gasket).
Scott
At 03:21 PM 8/15/00 -0400, you wrote:
>GM O2 sensor, what size are the threads?.
>14mm is too small, 16 or 18?.
>Bruce
>Got 4 irons in the fire, two of which are about hot.
>
>