[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Fuel injector cleaning system?
We routinely use Delco X66 , also helps loosen crustaceans from back of
valves
and upper Cyl areas. The scheme you mention gets it done.
Len
>I run a full service repair shop & have been around several injector cleaning
>systems. Nothing I've seen seems to work better than a 1/3 Delco X66 & 2/3
>gasoline mixture run through the pressure test port with the return line
>blocked off. I've seen factory systems & homemade systems alike. It's all a
>matter of hooking up a reservoir for the liquid with enough pressure to feed
>the system (13 to 45 psi depending on vehicle) & coming up with a way to tie
>into the fuel rail. Biggest advantage I find with the factory units is plenty
>of adapters. Wallace O.