[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Scope vs reported + 02 as reported



How (where) did you zap the code to correct the readings?  My concern is
using the 7749 (SyTy PROM) w/ a *three* bar sensor - errors are probably
compounded doing this.

Thanks - Barry

At 07:14 AM 5/14/00 -0400, you wrote:
>Turns out that GM does not do the two bar to one bar MAP conversion
>correctly in the Turbo Grand Prix.  Got the code changed and all
>is well now.  DIACOM does interpret the one bar MAP correctly.
>Scot Sealander