[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 730 DIS
Ford 4.6l uses a split DIS setup, 2coils (4-plug wires) mounted over each
cyl head. There is a remote DIS module on the fender that drives all four
coils. Have not researched the signal used for module,must be PIP or crank
trigger? Might be adaptable with a little signal conditioning. Would like to
use ford module with GM coils( can hide ford module) depending on cost, it's
a neat set-up.
John
-----Original Message-----
From: Bruce Plecan <nacelp@bright.net>
To: gmecm@efi332.eng.ohio-state.edu <gmecm@efi332.eng.ohio-state.edu>
Date: Saturday, January 08, 2000 5:36 AM
Subject: Re: 730 DIS
I was in error when I made that statement. The Quad4 uses a dual coil set
up.
Sorry,
Grumpy
|
| -> Some fousrs use 2 coils some use 4 (quad 4 using four)
|
| Hm, so they do. Do they fire each coil individually or as two pair?
| What ECMs came with the Quad 4?
|
|