Mail Thread Index
- Hey, what happened to the lights?,
TK
- Re: 16176424 PCM pinouts,
Matt Tomlins
- Subject: [admin] List services (automated monthly post),
jsg
- Re: Prom ID with 16198262 ECM,
Bruce Plecan
- Att. Bruce here is the Bin File,
James Wilson
- Re: DIS Module component ID,
Peter Gargano
- Re: knock knock goes the jeep....,
Ross Myers
- GM Marine 10-pin DLC?,
Andrew K. Mattei
- EGR and MAP,
Dave Williams
- Re: 1227165.. apyu bcc HELP!,
Bruce Plecan
- 730/727,
Bja1078
- <Possible follow-ups>
- Re: 730/727,
Ward
- Re: 730/727,
Bja1078
- Re: 730/727,
Bja1078
- Re: 730/727,
James Wilson
- Re: 730/727,
Dave Williams
- Re: 730/727,
Squash
- Re: 730/727,
Pat Ford
- Re: 730/727,
Dave Williams
- Re: 730/727,
Pat Ford
- Re: 730/727,
Dave Williams
- Re: 730/727,
Dave Williams
- Re: 730/727,
Dave Williams
- Re: 730/727,
Dave Williams
- Re: 730/727,
ECMnut
- Re: 730/727,
ECMnut
- Re: 730/727,
Dave Williams
- Re: 730/727,
Dave Williams
- Re: 730/727,
ECMnut
- Re: Few questions with regard to programming 101-Big Picture,
Shannen Durphey
- DIS ?.,
Bruce Plecan
- V6 / 730 ALDL datastream,
Bob Valentine
- Nissan Pulsar Exa 195 ECU Pinouts,
Andrew Wakeling
- Re[2]: 7730 memory locations,
Geoff Richards
- Information for converting old carburated systems,
Ch-complat
- sample documented 68hc11 for single point injectio,
Ch-complat
- W32/NewApt virus,
hmacneal
- Wanted M68HC11EVB- Evaluation Board,
PHXSYS
- plenum volume,
Kevin Reynolds
- re: 7747 "shaking" the vechile?!,
Mika Helander
- Odp: GM Marine 10-pin DLC?,
Marek Skrzypiec
- 94/95 GM PCM + M6 tranny question,
Dave Hempstead
- update on knock knock goes the jeep....,
John S. Gwynne
- Mike bumping into things,
Pat Ford
- Need help on 87 2.8v6,
Mike Rolica
- How to read E6 eeprom while programming ?,
PHXSYS
- Spk747_3.ecu,
Jon Fedock
- CarBytes v2,
Paul Blackmore
- Mapedit? - http://www.uq.net.au/~zzchack/smapedit.html,
Christian Hack
- EST,
Barry Tisdale
- RE: 89 MAF Volt to freq conversion,
Mike Rolica
- Re: .ecu,
cwagner
- Re: .ecu,
Mike Swayze
- <Possible follow-ups>
- RE: .ecu,
Mike Rolica
- RE: .ecu,
Mike Rolica
- RE: .ecu,
cwagner
- Re: .ecu,
Mike Swayze
- Re: .ecu,
Bruce Plecan
- Re: .ecu,
Mike Swayze
- Re: .ecu/prom masks, some variants,
Bruce Plecan
- Re: .ecu/prom masks, some variants,
Mike Swayze
- Re: .ecu/prom masks, some variants,
cwagner
- Re: .ecu/prom masks, some variants,
Ludis Langens
- Re: .ecu,
cwagner
- RE: .ecu,
cwagner
- P4 and on Memory Mapping,
Ross Myers
- Re: 165 to late MAF,
Thomas Matthews
- sitepage(previously 89 MAF Volt...),
Mike Swayze
- Archives,
Geoff Richards
- Re: Archives,
Bruce Plecan
- Re: Archives,
Scott Knight
- <Possible follow-ups>
- Re: Archives,
Greg Hermann
- Re: Archives,
Dave Williams
- RE: Archives,
Mike Rolica
- RE: Archives,
Mike Rolica
- Re: Archives,
ECMnut
- Re: Archives,
Dave Williams
- Re: Archives,
Dave Williams
- Re: Archives,
Dave Williams
- Re: Archives,
ECMnut
- archives,
Robert W. Hughes
- Archives,
Programmer
- Re: Archives,
Programmer
- ARCHIVES,
Mike Rolica
- More stunning news from CSH, HQ,
Bruce Plecan
- New GM web site,
Ross Myers
- Re: New to the group..,
Ross Myers
- 730 DIS,
Dave Williams
- Re: 730 DIS,
Bruce Plecan
- <Possible follow-ups>
- RE: 730 DIS,
Mike Rolica
- Re: 730 DIS,
Douglas Ratcliffe
- Re: 730 DIS,
Douglas Ratcliffe
- Re: 730 DIS,
Douglas Ratcliffe
- Re: 730 DIS,
Qeskimeaux
- Re: 730 DIS,
Dave Williams
- Re: 730 DIS,
John T. Martin
- Re: 730 DIS,
Dave Williams
- Re: 730 DIS,
Bob Valentine
- more DIS questions,
Mike Swayze
- Re: more DIS questions,
Shannen Durphey
- <Possible follow-ups>
- Re: more DIS questions,
Bob Valentine
- Re: more DIS questions,
Greg Hermann
- Re: more DIS questions,
Greg Hermann
- Re: more DIS questions,
Greg Hermann
- Re: more DIS questions,
Ward
- Re: more DIS questions,
Bruce Plecan
- Freighting an engine.,
TK
- Re: Freighting an engine.,
Clive Apps Techno-Logicals 416 510 0020
- Re: Freighting an engine.,
TK
- Re: Freighting an engine.,
Dave Zug
- Re: Freighting an engine.,
TK
- Re: Freighting an engine.,
Shannen Durphey
- Re: Freighting an engine.,
gene l. clifford
- Re: Freighting an engine.,
TK
- Re: Freighting an engine.,
Clive Apps Techno-Logicals 416 510 0020
- RE: Freighting an engine.,
Carl Summers
- x-fire pinouts,
Kevin Reynolds
- Datasheet for MC33199,
Andrew Mattei
- Re: X-fire,
Ross Myers
- Re: Airbag DIag, was: re: Mike bumping into things,
Qeskimeaux
- Opel Barina Pin-outs,
Richard Wakeling
- VSS output,
Shawn R. Lin
- Odp: Datasheet for MC33199,
Marek Skrzypiec
- Timing Jump on 165/TPI System,
Craig Moates
- Re: Timing Jump on 165/TPI System,
Bruce Plecan
- <Possible follow-ups>
- Re: Timing Jump on 165/TPI System,
John T. Martin
- Re: Timing Jump on 165/TPI System,
Qeskimeaux
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Mark Romans
- RE: Timing Jump on 165/TPI System,
Mike Rolica
- RE: Timing Jump on 165/TPI System,
Mike Rolica
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Mark Romans
- RE: Timing Jump on 165/TPI System,
Mike Rolica
- Re: Timing Jump on 165/TPI System,
Mark Romans
- Re: Timing Jump on 165/TPI System,
Mark Romans
- L -plates,
Paul Smith
- DIS Tach signal,
Shawn R. Lin
- 4 Cyl 730,
Bruce Plecan
- Snap On Scan Tool,
Andrew K. Mattei
- Re: Freighting an engine.,
Qeskimeaux
- Emulating... the pros,
Shannen Durphey
- IAC Orifice,
Mike Swayze
- LT1 manifold question (sort of NOT ECM related),
Marteney, Steven J.
- Crank Angle Sensors,
Rich Vandervoort
- dead simple recap,
Dave Williams
- VSS on 730,
Dave Williams
- prom emulator circuit--PCAD,
Mike Swayze
- Ken & Shannon re:Crossfire to 7747 pinout,
Kevin Reynolds
- 68HC11 Disassembler...,
Donald Whisnant
- another Xfire to 7747 wiring question.,
Kevin Reynolds
- Odp: OBDII cable source,
Marek Skrzypiec
- injectors,
cwagner
- MC6803U4 info?,
Daniel R. Henriksson
- again:eprom emulator circuits-pcad,
Swayze
- Dual injector select on crossfire injection.,
Kevin Reynolds
- ECM Bench kelp needed,
Bruce Plecan
- Hi and just joined this group,
Team ZR1
- 7747 AC connection.,
Kevin Reynolds
- Introduction,
Sam Stratton
- Memcals,
Geoff Richards
- Re: Memcals,
Bruce Plecan
- <Possible follow-ups>
- Re: Memcals,
JTesta1966
- Re: Memcals,
Swayze
- Re: Memcals,
Bruce Plecan
- Re: Memcals,
Geoff Richards
- Re: Memcals,
Bruce Plecan
- Re: Memcals,
steve ravet
- Re: Memcals,
Dave Zug
- What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Shannen Durphey
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Scott Knight
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Daniel Ciobota
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Team ZR1
- RE;Re: What model ECM is this ?,
Swayze
- Re: RE;Re: What model ECM is this ?,
Team ZR1
- Re: RE;Re: What model ECM is this ?,
Swayze
- Re: What model ECM is this ?,
Shannen Durphey
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Bruce Plecan
- Re: What model ECM is this ?,
Ludis Langens
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Shannen Durphey
- Re: What model ECM is this ?,
Team ZR1
- Re: What model ECM is this ?,
Scot Sealander
- Re: Memcals,
Bruce Plecan
- Re: Memcals,
Swayze
- Re: Memcals,
Dave Zug
- Re: Memcals,
Swayze
- Re: Memcals,
Ludis Langens
- Re: Memcals,
Swayze
- Re: Memcals,
Swayze
- Re: Memcals,
Ludis Langens
- Re: Memcals,
Swayze
- Re: Memcals,
Swayze
- High Flow MAF revisited - (Porsche 928 voltage MAF),
Davis
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Dave Zug
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Thomas Matthews
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Bruce Plecan
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Thomas Matthews
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Dave Zug
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
alexpeper
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
alexpeper
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Swayze
- Re: Memcals,
Andrew K. Mattei
- Re: Memcals,
Andrew K. Mattei
- Re: Memcals,
Pat Ford
- Re: Memcals,
Walter Sherwin
- Re: Memcals,
Dave Williams
- Re: Memcals,
Dave Williams
- Re:memcals,
DBonnes
- Re: memcals,
DBonnes
- Re: memcals,
DBonnes
- CR Util,
Dave Zug.
- Re: What model ECM is this ?,
Mark Romans
- starting point L-plates,
Paul Smith
- [no subject],
Paul Blackmore
- 1227165 89 and Burst knock,
Bruce Plecan
- Re;Re: What model ECM is this ?,
Swayze
- Gummy Chryslers,
Programmer
- Clues needed,
Bruce Plecan
- BBC ACFB?,
Bruce Plecan
- OFF SUBJECT re: WHAY ECM IS THIS,
Swayze
- I'm new...test,
ronald . j . selberg
- ECM data logging w/new laptop,
James P Hunt
- Re: GMECM Digest V2 #20,
Paul Blackmore
- bin needed,
Shannen Durphey
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF),
Mark Romans
- Bin recieved...,
Shannen Durphey
- 730 .ecu file,
James P Hunt
- Re: Fw: 747 programing,
Dave Zug
- CarBytes V2 now on GM-ECM ftp site,
Paul Blackmore
- Red Alert, Bin needed,
Bruce Plecan
- Syncing crossfire injection,
Kevin Reynolds
- Re: .bin file needed..,
Walter Sherwin
- MAF conversion revisited,
Swayze
- Software request,
Ch-complat
- LT5 Info.., and 1228331 stuff in general.,
Bruce Plecan
- Re: LT5 Info.., and 1228331 stuff in general.,
Daniel Ciobota
- Re: LT5 Info.., and 1228331 stuff in general.,
Marc Randolph
- Re: LT5 Info.., and 1228331 stuff in general.,
Bruce Plecan
- Re: LT5 Info.., and 1228331 stuff in general.,
Marc Randolph
- Re: LT5 Info.., and 1228331 stuff in general.,
Ken Kelly
- Re: LT5 Info.., and 1228331 stuff in general.,
Marc Randolph
- Re: LT5 Info.., and 1228331 stuff in general.,
Swayze
- Re: LT5 Info.., and 1228331 stuff in general.,
Team ZR1
- Re: LT5 Info.., and 1228331 stuff in general.,
Tom Sharpe
- Re: LT5 Info.., and 1228331 stuff in general.,
Bruce Plecan
- Re: LT5 Info.., and 1228331 stuff in general.,
Team ZR1
- Re: LT5 Info.., and 1228331 stuff in general.,
Bruce Plecan
- <Possible follow-ups>
- Re: LT5 Info.., and 1228331 stuff in general.,
Mark Romans
- Re: LT5 Info.., and 1228331 stuff in general.,
Squash
- Re: LT5 Info.., and 1228331 stuff in general.,
Squash
- RE: LT5 Info.., and 1228331 stuff in general.,
Mark M. Pikas
- Re: LT5 Info.., and 1228331 stuff in general.,
ECMnut
- Re: LT5 Info.., and 1228331 stuff in general.,
Squash
- Just a little follow up to LT5 posting,
Bruce Plecan
- Scantool for '93 4.3L?,
Jared Tschetter
- Uploading Stuff To FTP Incoming,
Walter Sherwin
- Re: '730 ecu,
Programmer
- Vette serial data and scan tool communications,
Shannen Durphey
- Re: VSS question,
Mark Romans
- Prom burning,
JN
- fuel pump for GM TPI,
Vinnie Moscaritolo
- 'Nother pinout needed..,
Shannen Durphey
- 454SS Truck ".bin" File,
Walter Sherwin
- [ADMIN] Lists are moving!,
Orin Eman
- New to the list...,
C and T
- Re: Car bytes newbie question,
Programmer
- IAT MAT differences,
Bruce Plecan
- Corvette ECM,
JN
- 7730v2 ecu file,
cwagner
- [ADMIN] test - ignore,
Orin
- IAC parameters,
Barry Tisdale
- [admin] test 2,
John S. Gwynne
- [ADMIN] The Move,
Orin
- HOORAY! and bigMaF,
Dave Zug
- CarBytes v2 toolbar problem,
Paul Blackmore
- 7730v3 ecu file,
cwagner
- DIS ?????s,
Bruce Plecan
- 89 Corvette ECM,
JN
- Knock Sensor Tidbit,
Ludis Langens
- Knock sensor pins,
Barry Tisdale
- ftp site,
steve ravet
- Disguised scan tool,
Shannen Durphey
- Send pics,
Mark Huffman
- Knock sensors,
Geoff Richards
- 7170.ecu help,
James P Hunt
- How do I do a quick test of a 730,
Eric Aos
- TGB Adaptation Help?,
Rex Weatherford
- TB Adaptation Help?,
Rex Weatherford
- Crossfire SES driver & 7747,
Kevin Reynolds
- TPI Vacuum at idle,
gabe
- 88 quad-4,
cwagner
- Re: 88 quad-4,
Shannen Durphey
- <Possible follow-ups>
- Re: 88 quad-4,
ECMnut
- Re: 88 quad-4,
ECMnut
- Re: 88 quad-4,
ECMnut
- Re: 88 quad-4,
ECMnut
- Re: 88 quad-4,
ECMnut
- Re: 88 quad-4,
cwagner
- Re: 88 quad-4,
Bruce Plecan
- Re: 88 quad-4,
Richard Wakeling
- new to list and question,
Charles A. Fair
- Re: new to list and question,
Shannen Durphey
- Re: new to list and question,
Charles A. Fair
- Re: 88 quad-4,
cwagner
- Re: 88 quad-4,
Bruce Plecan
- Re: 88 quad-4,
cwagner
- Re: 88 quad-4,
Ludis Langens
- Re: 88 quad-4,
Charles A. Fair
- Re: 88 quad-4,
Bruce Plecan
- Re: 88 quad-4,
Charles A. Fair
- Re: 88 quad-4,
Shannen Durphey
- Re: 88 quad-4,
Charles A. Fair
- Re: 88 quad-4,
Programmer
- More user friendly, please..,
Shannen Durphey
- Re: 7148 -> 7783 table locs,
JTesta1966
- RE: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?,
Michael Adams
- Sorry for Mis-Post Re: Oil,
Michael Adams
- Mobil1 vs. Non-Synthetic vs. Red Line?,
Greg Hermann
- Northstar DIS,
Scott Knight
- Fw: Water injection (tech refs),
Bruce Plecan
- Greddy air-fuel ratio meter,
Bruce Plecan
- 3.1L turbo vin V schematics uploaded,
steve ravet
- [no subject],
Mike Rolica
- Crossfire mod.. plenum volume or enlarged TBIs first?,
Kevin Reynolds
- Anyone have a burner, eraser, or eproms they want to sell?,
Kevin Reynolds
- Public Thanks,
Bruce Plecan
- Question from newbie,
JN
- Carputing software,
Programmer
- Quad 4 .bin file,
ronald . j . selberg
- Re: Archives? [was Greddy air-fuel ratio meter],
Greg Hermann
- EFI332 Archives,
Robert W. Hughes
- Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents),
Roger Heflin
- 1227165 Questions,
JN
- Any broken ECM's out there?,
Michael Davis
- Attn. Richard,
ronald . j . selberg
- Tech 1 Questions,
Richard Wakeling
- Lost at CSH, HQ,
Bruce Plecan
- 727+LT1Conectr.jpg,
Shannen Durphey
- Too hot 7805,
Bruce Plecan
- Adapting GM ECM to Chrysler Turbo,
Thomas McCabe
- Re: Too hot 7805,
Scot Sealander
- Re: Too hot 7805,
Barry Tisdale
- Re: Too hot 7805,
Peter D. Hipson
- Re: Too hot 7805,
Ludis Langens
- <Possible follow-ups>
- RE: Too hot 7805,
Mika . Helander
- RE: Too hot 7805,
Frederic Breitwieser
- RE: Too hot 7805,
Frederic Breitwieser
- RE: Too hot 7805,
Don . F . Broadus
- RE: Too hot 7805,
Sam Stratton
- Re: Too hot 7805,
Bill Shaw
- Re: Adapting GM ECM to Chrysler Turbo,
ECMnut
- Confuzin signals,
Bruce Plecan
- Dribbles, and drabbles yes EFI,
Bruce Plecan
- Re: Dribbles, and drabbles yes EFI,
Tom Sharpe
- <Possible follow-ups>
- Re: Dribbles, and drabbles yes EFI,
Ward
- Re: Dribbles, and drabbles yes EFI,
Squash
- Re: Dribbles, and drabbles yes EFI,
Squash
- Dribbles, and drabbles yes EFI,
Dave Williams
- Re: Dribbles, and drabbles yes EFI,
Dave Williams
- High Freq MAF Problem,
Scot Sealander
- V-Maf Differences for Part #s,
Dave Zug.
- DIS ????,
Bruce Plecan
- EFI - Terminology and acronyms,
Paul Blackmore
- New Member here,
olbap
- Questions about chips,
FstAssBlzr
- Re: Greddy air-fuel ratio meter, really ALDL messages,
Dave Hempstead
- Re: 2 bar map sensor,
steve ravet
- New Member, LT1 Questions,
Dave Plummer
- Re: New Member, LT1 Questions,
Dave Zug
- Re: New Member, LT1 Questions,
Glen Beard
- <Possible follow-ups>
- Re: New Member, LT1 Questions,
Bja1078
- Re: New Member, LT1 Questions,
Peter Fenske
- Re: New Member, LT1 Questions,
Chipsbyal
- Re: New Maf, a thought,
Peter Fenske
- MAF to MAP (speed density),
Programmer
- Greetings from a "new" member,
Dig
- Re: Auto learn code-Where?,
Jeff M
- Re: When asking ecm questions,
Jeff M
- Injector sizes?,
Rex Weatherford
- Recommended books for burning???,
Kevin Reynolds
- Fw: LT1 with boost.,
nacelp
- Re: Wide band o2,
Walter Sherwin
- test, delete please,
kgil1
- Re: Maf to Map again,
Peter Fenske
- Re: [Re: Greetings from a "new" member],
Dig
- Newbie questions and intro.,
Keith
- Can anybody Identify these Components,
Richard Wakeling
- EPROM Burner (Modular Circuit Technology, MOD-MEP-1C) F.S.,
Keith
- Using 28F256 in a 747 instead of 2732A??????????,
Kevin Reynolds
- Crossfire injectors.,
Kevin Reynolds
- Re: Crossfire injectors.,
nacelp
- Re: Crossfire injectors.,
Kevin Reynolds
- Re: Crossfire injectors.,
Nico Over
- RE: Crossfire injectors.,
Ken Kelly
- Re: Crossfire injectors.,
Nico Over
- Re: Crossfire injectors.,
Kevin Reynolds
- RE: Crossfire injectors.,
Ken Kelly
- RE: Crossfire injectors.,
Carl Summers
- Re: Crossfire injectors.,
Brent Obermiller
- Re: Crossfire injectors.,
nacelp
- Re: Crossfire injectors.,
Gregory A. Parmer
- Re: Crossfire injectors.,
nacelp
- <Possible follow-ups>
- Re: Crossfire injectors.,
John_Calabrese
- Re: Crossfire injectors.,
Programmer
- Re: Crossfire injectors.,
Squash
- Re: Crossfire injectors.,
Bob Valentine
- Re: Crossfire injectors.,
Programmer
- Re: Crossfire injectors.,
Programmer
- Re: Crossfire injectors.,
Squash
- Re: Crossfire injectors.,
Fran and Bud
- Delta ?,
Geoff Richards
- Audible knock detectors,
Dave Plummer
- Big Injectors,
Walter Sherwin
- MAF and Calculated VE,
Scot Sealander
- 2732As any recommended speed or brand?,
Kevin Reynolds
- Application for ASMJ Broadcast code,
James Wilson
- Re: [Re: Using 28F256 in a 747 instead of 2732A??????????],
Dig
- GM training manuals,
steve ravet
- Ignition timing question,
Barry Tisdale
- Re: [Re: [Re: Using 28F256 in a 747 instead of 2732A??????????]],
Dig
- '165 ACWS,
Bob Valentine
- EPROM -> NVRAM, ALDL mode-11,
John S. Gwynne
- syclone bin,
John S. Gwynne
- Timing, revisited....,
Barry Tisdale
- Re: [syclone bin],
Dig
- Rev Limiter,
Squash
- Re: [Re: [syclone bin]],
Dig
- Re: Performance Parts,
Jason Bonie
- '165 to '730,
Davis
- injectors --- > liquidation,
Marc Piccioni
- rats! vats!,
Kelly Parker
- Does anyone have an ALD file for a 730?,
Eric Aos
- VATS elimination,
Dan Plaskett
- Tools that work,
nacelp
- Reading/Study Material EFI,
nacelp
- LO3 TBI Total timing advance, how much?,
olbap
- TBI injector flow vs pressure and demand,
olbap
- DP Ram Emulator...,
Eric Aos
- Re: xfire injectors now gas tanks,
Programmer
- Weather proofing electronics.,
Kevin Reynolds
- How to identify eprom,
Dan Plaskett
- Re: harness special,
BBBDLGCON
- GM ZZ4 chip ?,
C and T
- 727,730,injectors,
Swayze
- Re: the GN [no EFI],
ECMnut
- X-Ram Crossfire intake,
Chipsbyal
- GM ECM transplant or fuel enrichment,
Jon Watts
- To the HC11 Number Gurus,
Andrew Wakeling
- Group purchase of harness- was Re: harness special,
Thomas Matthews
- Re: Group purchase of harness- was Re: harness special,
Ludis Langens
- Re: Group purchase of harness- was Re: harness special,
Shannen Durphey
- RE: Group purchase of harness- was Re: harness special,
Carl Summers
- Re: Group purchase of harness- was Re: harness special,
Nico Over
- Re: Group purchase of harness- was Re: harness special,
David
- <Possible follow-ups>
- Re: Group purchase of harness- was Re: harness special,
Mark Romans
- Re: Group purchase of harness- was Re: harness special,
Bob Valentine
- Re: Group purchase of harness- was Re: harness special,
David
- Re: Group purchase of harness- was Re: harness special,
ECMnut
- Re: Group purchase of harness- was Re: harness special,
Kelly Parker
- LM3914???,
John_Calabrese
- LM3914 jameco part #,
John_Calabrese
- Re: Group purchase of wiring harness,
Don Asetta
- 88 TBI issue,
Eric Deslauriers
- RE: 88 TBI issue,
Carl Summers
Disassembler info: (was Syclone bin),
Dig
'727/'730 v-8 .bin EGR,
Swayze
Fuel Pump (was [Re: Crossfire injectors.]),
Dig
Guidance:I am a beginer !!,
VAIDYA AJAY ASHOK
ecm bench,
Bja1078
- Re: ecm bench,
Shannen Durphey
- Re: ecm bench,
PCMdoc
- Re: ecm bench,
Jennifer Green & Scott Peitzsch
- V8 '165 harness modifications,
Ernst denBroeder
- Re: V8 '165 harness modifications,
Gabe
- Re: V8 '165 harness modifications,
John S. Gwynne
- Re: V8 '165 harness modifications,
Jeff M
- Message not available
- Re: V8 '165 harness modifications,
Ernst denBroeder
- Re: V8 '165 harness modifications,
John S. Gwynne
- Re: V8 '165 harness modifications,
SPECTRO COATING CORP.
- Re: V8 '165 harness modifications,
Brent Obermiller
- Re: V8 '165 harness modifications,
Shannen Durphey
- Re: V8 '165 harness modifications,
SPECTRO COATING CORP.
- Re: V8 '165 harness modifications,
Ernst denBroeder
- Re: V8 '165 harness modifications,
Shannen Durphey
- Re: V8 '165 harness modifications,
Eric Deslauriers
- Re: V8 '165 harness modifications,
gabe
- Re: ecm bench,
nacelp
<Possible follow-ups>
Re: ecm bench,
Ward
ECM Bench,
nacelp
Re: Group purchase of harness fizzled,
Ross Myers
Odp: LM3914???,
Marek Skrzypiec
Need help on 87 GM Buick GN ESC pin-out...,
Iestyn Guest
Anyone notice Grumpy has been MIA..??,
ECMnut
How do you get chips out of the darn holder??,
Kevin Reynolds
Re: O2 sensor/tailpipe adapter?,
Bob Valentine
someone is selling Diacom compatible cables,
ECMnut
RE: V8 '165 harness modifications,
Mike rolica
Test only,
kojab
tbi:454 vs. 350,
cwagner
Heated O2 sensors,
Shawn R. Lin
Re: was rats! vats! now nostalgia,
Programmer
RE: nostalgia,
Eric Aos
- Re: nostalgia,
Kevin Reynolds
- Speedometer Scaling,
Dave Plummer
- <Possible follow-ups>
- Re: nostalgia,
Fran and Bud
- Re: nostalgia,
Sam Stratton
- Re: nostalgia,
Ross Myers
- Re: nostalgia,
ECMnut
- RE: nostalgia,
Frederic Breitwieser
- Re: nostalgia,
Programmer
- RE: nostalgia,
Frederic Breitwieser
- Re: Nostalgia,
Dig
- Re: nostalgia,
Bill Shaw
Re: Fuel Pump,
Bja1078
Diacom: Is anyones selling theirs?,
Eric Deslauriers
Conversion table,
Ramsey Foster
EPROM BCC decode,
Michael Davis
PE mode questions.,
Kevin Reynolds
programming specs for N821s181,
Kevin Reynolds
Re: Diacom problems on Thinkpads (Was Re: 88 TBI issue),
Squash
Need help with spark map's in 747.,
Kevin Reynolds
mail delivery,
Marc Piccioni
PING,
Swayze
747 aldl,
Jeremy Gonyou
7747 Aldl Communication,
Jeremy Gonyou
Nother ALDL grabbing method,
Dave Zug
ALDL (8192) command timing (sort of longish),
Dig
OH - PS:,
Dave Zug
[ADMIN] Server troubles.,
Jon V.
Site Down?,
nacelp
Need help with PE mode questions.,
Kevin Reynolds
[ADMIN] When it rains...,
Jon V.
[no subject],
Paul Blackmore
[no subject],
Paul Blackmore
Revised QBasic ALDL program for 165 with MAX232 on incoming,
Craig Moates
Re: AKFM 2174 bin,
Programmer
Thinkpad 755C for sale,
Craig Moates
Cheap Programmers\Erasers,
jweir
Re: O2 Sensors - Output Graphs?,
Regnirps
RE: Newbie question,
jacobss
Emulator boards,
David Cooley
Re: GMECM Digest V2 #71,
Dig
Re: IAC motors,
Ross Myers
knock sensor readout,
John_Calabrese
knock sensor/solid cam,
Jeffrey Scott
Building PCB's,
Marc Randolph
SLP Harness,
Squash
Justa test ignore,
nacelp
Still looking for bins,
nacelp
Re: XDE Documents,
Walter Sherwin
Newbie,
BBadMonkey
more nother ALDL,
Dave Zug
Debugger board for P4 ECMs,
Ludis Langens
P4 Cylinder Select,
Ludis Langens
Are my posts making it? was Speedometer Scaling,
Dave Plummer
MAP data...was Re: 48 +1 and sensor data,
John S. Gwynne
Desensitizing GM knock sensors,
Jim Wilson
Re: Fuel prices / efficiency,
JTesta1966
Re: GMECM Digest V2 #78,
Jody Shapiro
Re: Debugger board for P4 ECMs,
Swayze
Data I/O 29B device programmer for sale,
steve ravet
don't read, just a test.,
Kevin Reynolds
2.0/2.2/2.5 DIS pinouts,
Shannen Durphey
Now Emulator was ---->RE: Debugger board for P4 ECMs,
Eric Aos
Turbo bin uploaded to incoming,
Ludis Langens
LT1 boost retard??,
Shannen Durphey
Help with stupid question.,
Kevin Reynolds
H*lp with stupid question.,
Kevin Reynolds
1227748 schematic updated,
Ludis Langens
Re: Australia based GM .ecu files,
Daniel N
[no subject],
DAVID THOMAS
cheap eprom burner group purchase,
Bob Valentine
Selling 68HC11 stuff,
Regnirps
Dummy guestion,
nacelp
2-bar MAP snensor,
John S. Gwynne
h*lp maps question,
Paul Smith
BPW numbers,
Programmer
Any Dead MAFs ?,
Davis
93 F-Body M6 BIN,
Eric Clark
Selectable chips & boost programming,
Douglas Ratcliffe
- Re: Selectable chips & boost programming,
David Cooley
- <Possible follow-ups>
- Re: Selectable chips & boost programming,
Programmer
- Re: Selectable chips & boost programming,
Programmer
- Re: Selectable chips & boost programming,
Programmer
- Re: Selectable chips & boost programming,
Programmer
- Re: Selectable chips & boost programming,
BBadMonkey
- Re: Selectable chips & boost programming,
Programmer
- Re: Selectable chips & boost programming,
Programmer
- RE: Selectable chips & boost programming,
Marteney, Steven J.
cjkw1922_AUST.BIN,
Sutcliffe, Peter
Motorola S code to binary conversion program/utility,
Jason R. Haines
ABS-OFF TOPIC-OFFLIST,
Mike Swayze
Mysterious rogue connector,
Marteney, Steven J.
Speedometer,
cwagner
Analog Cadillac/Bendix to'730,
Russ Harms
Newbie to list,
MdntRdr1
Re: Speedometer - transparent first-surface reflector needed!,
mike mager
re:speedo-heads up disply was: speedometer-transparent first surface reflector needed,
Swayze
Troublesome Eprom,
Shannen Durphey
MEMCAL swap '88 to '89 (identical cars),
Shawn R. Lin
Odp: ABS-OFF TOPIC-OFFLIST,
Marek Skrzypiec
eprom carriers,
NickG
lost 27 emails,
Programmer
need corvette bin file,
NickG
Re: Using 28F256 ...,
Jeremy Gonyou
reprogramming MAF xfer function in '165 ECM,
NickG
LS1 Pinouts,
Ross Myers
New files on FTP site,
Shannen Durphey
Motorola chip and more,
Carl Summers
fast chip,
Pat Ford
Schematic proofreader needed,
Ludis Langens
curious about sfi,
Mike Swayze
305-350CAM,
Programmer
Re: Selectable chips & boost programming (thanks),
Douglas Ratcliffe
Lt1 Optispark,
Douglas Ratcliffe
Flow Chart,
nacelp
ALDL Communications,
Jeremy Gonyou
'727('730) sfi was:Re: curious about sfi,
Mike Swayze
DIS again--sensor interface,
Mike Swayze
New .bins on ftp site,
Shannen Durphey
fastchips,
Pat Ford
Rom Changers,
Christian Hack
Frederic Breitwieser is famous!! (noefi),
John_Calabrese
To NOP, or not to NOP...,
Shannen Durphey
Plug reading,
David Cooley
- Re: Plug reading,
nacelp
- <Possible follow-ups>
- Re: Plug reading,
Programmer
- Re: Plug reading,
Programmer
- Re: Plug reading,
David Cooley
- Re: Plug reading,
Programmer
- Re: Plug reading,
Programmer
- Plug Reading,
Bruce Plecan
- RE: Plug Reading,
Mike Rolica
- RE: Plug Reading,
Mike Rolica
- RE: Plug Reading,
Mike Rolica
- RE: Plug Reading,
David Cooley
- RE: Plug Reading,
Mike Rolica
- Plug reading,
Bruce Plecan
Flow rates on injectors 2.8 & 3.1 engines,
Dan Plaskett
1227730/1227749 Schematic,
Ludis Langens
VR Sensors,
Bill Shaw
algrippocode.zip,
Swayze
2 bar axxc bin for '7730,
John S. Gwynne
List member virus alert,
Mike Pitts
Fw: Dummy at CSH, HQ,
nacelp
305 to 350,
Jeremy Gonyou
.Bin needed,
Shannen Durphey
#INTRO: New List Member,
Webmaster
Fwd: *ALERT* Worm Virus Spreading thru Buick community,
JTesta1966
injector flow (links and question),
Mike Swayze
GM Powertrain,
303print
Lotus carlton ECU?,
Dave Evans
VATS,
Keith Lund
Administrivia,
Orin
Signal generator for ecm bench,
Scott Knight
89 F-body ECU file = 89 Y-body ECU file?,
Marteney, Steven J.
- Re: 89 F-body ECU file = 89 Y-body ECU file?,
nacelp
- <Possible follow-ups>
- RE: 89 F-body ECU file = 89 Y-body ECU file?,
Marteney, Steven J.
- RE: 89 F-body ECU file = 89 Y-body ECU file?,
Marteney, Steven J.
- RE: 89 F-body ECU file = 89 Y-body ECU file?,
Mike rolica
- RE: 89 F-body ECU file = 89 Y-body ECU file?,
Marteney, Steven J.
- RE: 89 F-body ECU file = 89 Y-body ECU file?,
Mike Rolica
- RE: 89 F-body ECU file = 89 Y-body ECU file?,
Mike Rolica
- 89 F-body ECU file = 89 Y-body ECU file?,
Mark Romans
- RE: 89 F-body ECU file = 89 Y-body ECU file?,
Mike rolica
Big cams are better,
joe boucher
Re: 4L60E Trans controller,
Ward
- Re: 4L60E Trans controller/Ward,
gene l. clifford
- <Possible follow-ups>
- RE: 4L60E Trans controller,
Scott Parkhurst
- Re: 4L60E Trans controller,
nacelp
- Re: 4L60E Trans controller,
nacelp
- Re: 4L60E Trans controller,
Scott Knight
- Re: 4L60E Trans controller,
gene l. clifford
- dumb & dumber,
gene l. clifford
- Re: dumb & dumber,
Swayze
- Re: dumb & dumber,
David Cooley
- Re: dumb & dumber,
Shannen Durphey
- Re: dumb & dumber,
Swayze
- Re: dumb & dumber,
Swayze
- Re: dumb & dumber,
Shannen Durphey
- Re: dumb & dumber,
Swayze
- Re: dumb & dumber,
nacelp
- Re: dumb & dumber,
steve ravet
- RE: dumb & dumber,
Carl Summers
- Re: dumb & dumber,
nacelp
- Re: dumb & dumber/bad #,
gene l. clifford
- Re: dumb & dumber/bad #,
nacelp
- Re: dumb & dumber/bad #,
Shannen Durphey
- Re: dumb & dumber/bad #,
C. Brooks
- Re: dumb & dumber,
nacelp
- 700R4 TCC Solenoid bad? (limited EFI content),
Peter Gargano
- Re: 700R4 TCC Solenoid bad? (limited EFI content),
David Cooley
- Re: 700R4 TCC Solenoid bad? (limited EFI content),
steve ravet
- Re: 700R4 TCC Solenoid bad? (limited EFI content),
nacelp
- Re: dumb & dumber,
Shannen Durphey
- Re: dumb & dumber,
Shannen Durphey
- Re: dumb & dumber,
gene l. clifford
- Re: dumb & dumber,
steve ravet
- Re: dumb & dumber,
Shannen Durphey
- Re: 4L60E Trans controller,
Shannen Durphey
- RE: 4L60E Trans controller,
Scott Parkhurst
- RE: 4L60E Trans controller,
Scott Parkhurst
- RE: 4L60E Trans controller,
Scott Parkhurst
- RE: 4L60E Trans controller,
Greg Hermann
- RE: 4L60E Trans controller,
alexpeper
- RE: 4L60E Trans controller,
Greg Hermann
- Re: 4L60E Trans controller,
Greg Hermann
- RE: 4L60E Trans controller,
Scott Parkhurst
- RE: 4L60E Trans controller,
Scott Parkhurst
- RE: 4L60E Trans controller,
Scott Parkhurst
- RE: 4L60E Trans controller,
alexpeper
Idle richness with 7747.,
Kevin Reynolds
RN Carriers for 2732A EPROMS,
Craig Marcho
O2 voltage on Diacom,
Marteney, Steven J.
Intro and a Request!,
Craig Marcho
CYCLONE 700R4 AWD VSS,
Swayze
Re: 4L60E Trans controller/Ward,
Ward
Re: AWWH and AWUP,
Walter Sherwin
Re: 4L60E trans controller,
Nykyforuk
730/727 instead of 7747... Has it been done?,
olbap
VE stability,
John S. Gwynne
HEI,
Guenther,Max [ASCO/PA]
missed digest 106,
Nykyforuk
Re: MAP signal dampening,
Ward
- <Possible follow-ups>
- Re: MAP signal dampening,
Ward
- RE: MAP signal dampening,
alexpeper
- RE: MAP signal dampening,
Mike rolica
- RE: MAP signal dampening,
alexpeper
- RE: MAP signal dampening,
Greg Hermann
- Re: MAP signal dampening,
Programmer
- RE: Map Signal Dampening,
Michael Adams
- Re: MAP signal dampening,
Programmer
- Re: MAP signal dampening,
Programmer
- Re: MAP signal dampening,
Programmer
Bosch ecm,
Geoff Campbell
Dumping beyond $FFFF,
Ross Myers
BBC TB Needed,
nacelp
'747 top end fuel leanout,
NickG
thermistor time was: 89 F-body ECU file = 89 Y-body ECU file?,
alexpeper
Re: MAP signal damping,
Gerald Pelnar
engine simulator,
nacelp
Re: MAP signal damping/more cam help,
JTesta1966
91 Lotus Carlton ECU,
Webmaster
ANHT,
Guenther,Max [ASCO/PA]
7730ALDL,
cwagner
VSS differences for 746 to 730 swap,
olbap
Wacky idea to force Alpha-n on a SD gm ecm.. a silly idea for thoes with map woes,
olbap
ALDL, ANHT,
cwagner
Ford to GM swap...,
David Cooley
Horsepower!!!,
David Cooley
RE: dumb & dumber (from the dumbest :-),
Marteney, Steven J.
Paddle Shifters - Electronic Trans Controller,
Walter Sherwin
PCM min for tranny oper,
nacelp
1226156,
Programmer
Re: 700R4 TCC Solenoid bad? (limited EFI content),
mike mager
Re: AWWH and AWUP (and BAMY),
Walter Sherwin
MAP sensors,
Mike Swayze
Fw: 12497316,
gene l. clifford
RE: dumb & dumber,
Scott Parkhurst
Ignition Simulator,
nacelp
Re: TCC lockup on 700R4,
Dig
Delco,
black maj
Re: 12497316/ fax copy,
Jeff Kopp
Re: Wacky idea to force Alpha-n on a SD gm ecm,
olbap
TCom_MAP EFax,
Mike Swayze
PCM Questions,
Shawn R. Lin
My turn for a conversion,
JTesta1966
1228331 (16157364?),
Mike Swayze
Color Tune - Safety Warning !,
Mike (Perth, Western Australia)
Cam tuning,
Douglas Ratcliffe
- Re: Cam tuning,
nacelp
- Re: Cam tuning,
Roger Heflin
- <Possible follow-ups>
- Re: Cam tuning,
Jim Wilson
- Re: Cam tuning,
Douglas Ratcliffe
- Re: Cam tuning,
Jim Wilson
- Re: Cam tuning,
Jim Wilson
- RE: Cam tuning,
Douglas Ratcliffe
- cam tuning,
Jim Wilson
- Re: Cam tuning,
Jim Wilson
- Re: Cam tuning,
Douglas Ratcliffe
- Re: Cam tuning,
Roger Heflin
- Re: Cam tuning,
Barry Tisdale
- Re: Cam tuning,
nacelp
- Re: Cam tuning,
Scott Knight
- Re: Cam tuning,
Shannen Durphey
- Re: Cam tuning,
Scott Knight
- Re: Cam tuning,
Shannen Durphey
- Re: Cam tuning,
Scott Knight
- Driving an HEI Module with other signals,
Peter Gargano
- Re: Driving an HEI Module with other signals,
Shannen Durphey
- Re: Driving an HEI Module with other signals,
Brent Obermiller
- Re: Driving an HEI Module with other signals,
nacelp
- Re: Driving an HEI Module with other signals,
nacelp
- HEI Module versions?,
Peter Gargano
- Re: HEI Module versions?,
nacelp
- E-prom ereaser& burner,
gene l. clifford
- RE: E-prom ereaser& burner,
Craig Marcho
- Re: E-prom ereaser& burner,
Brent Obermiller
- Re: E-prom ereaser& burner,
nacelp
- Re: E-prom ereaser& burner,
gene l. clifford
- Re: E-prom ereaser& burner,
gene l. clifford
- Re: E-prom ereaser& burner,
nacelp
- Re: E-prom ereaser& burner,
Keith
- Archives,
Keith
- Re: E-prom ereaser& burner,
Shawn R. Lin
- Re: E-prom ereaser& burner,
Dr.Acacio
- Re: E-prom ereaser& burner,
Shawn R. Lin
- Re: E-prom ereaser& burner,
David Cooley
- Re: E-prom ereaser& burner,
JN
- Re: E-prom ereaser& burner,
gene l. clifford
- Re: E-prom ereaser& burner,
nacelp
- Re: E-prom ereaser& burner,
gene l. clifford
- Re: Cam tuning,
Shannen Durphey
- Re: Cam tuning,
nacelp
- Re: Cam tuning,
Scott Knight
- Re: Cam tuning,
nacelp
- Re: Cam tuning,
Ludis Langens
- Re: Cam tuning,
Jim Wilson
- Re: Cam tuning,
ECMnut
LS1 in 64 Impala SS,
Dave & Irina Eicher
E(E)PROM pn and speeds,
Bob Valentine
TPI 747,
nacelp
7747 Bin needed,
Jeremy Gonyou
power towers ??,
Programmer
DIS again,
Swayze
Newbies, and archives,
nacelp
added baro sensor to 730,
jsg
Speedo scaler,
nacelp
TBI vs Port Injected,
Rich Vandervoort
MAF part no needed 88 vin C,
nacelp
Re: 88 asd super chip,
Mark Romans
Re: Driving an HEI Module with other signals,
Bob Valentine
A/F gauges and O2 sensors.,
Kevin Reynolds
RE: Distributor Machine/Ignition Tests,
Mike Veldman
RE: HEI Module versions?,
Don . F . Broadus
Re: E-prom ereaser& burner,
black maj
VE table 1 & 2 relationship, and BLMs past 3600rpm.,
Kevin Reynolds
Reconditioned PB10s $40 off was E-prom burner & eraser.,
Kevin Reynolds
ECMS for sale,
nacelp
BLM collection!?,
Kevin Reynolds
Emulator,
Barry Tisdale
- <Possible follow-ups>
- Emulator,
Barry Tisdale
First GN chip,
nacelp
Checksum questions,
Bob Valentine
Did I miss something?,
BBadMonkey
New member with VE table Q's,
Joe Shuhy
ND 1181281,
Swayze
ECM compatibility,
C and T
Quad-4 (1228707 ECM) Rough Idle Problem,
Will Remaklus
- <Possible follow-ups>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
ECMnut
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
ECMnut
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
david garnier
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Will Remaklus
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
nacelp
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Will Remaklus
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Shannen Durphey
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
nacelp
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
remaklus
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Shannen Durphey
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Brent Obermiller
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Shannen Durphey
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
remaklus
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Rex Weatherford
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
Mark Romans (ICQ#66838770)
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
mike mager
- Re: Quad-4 (1228707 ECM) Rough Idle Problem,
mike mager
48T group wheel buy status ???,
Marc Piccioni
Xeltek EPROM Programmers (Pls Read),
Ross Myers
52 Lb injectors,
DC Smith
Re: Injector Problem,
Walter Sherwin
[no subject],
Paul Blackmore
Scanners vs Diacom (and recording scanners),
nacelp
new subscriber please help ecm problem,
Ed Stoll
GM Alternate fuel service manuals,
PHXSYS
- Re: GM Alternate fuel service manuals,
kb4mxo
- Re: GM Alternate fuel service manuals,
Mike (Perth, Western Australia)
- <Possible follow-ups>
- Re: GM Alternate fuel service manuals,
PHXSYS
- Re: GM Alternate fuel service manuals,
PHXSYS
- Re: GM Alternate fuel service manuals,
Chipsbyal
- Re: GM Alternate fuel service manuals,
Dig
- Re: GM Alternate fuel service manuals,
PHXSYS
- Re: GM Alternate fuel service manuals,
Ross Myers
- Re: GM Alternate fuel service manuals,
PHXSYS
- Re: GM Alternate fuel service manuals,
John T. Martin
- Re: GM Alternate fuel service manuals,
Ross Myers
Wastegate Controller,
nacelp
Boost controller,
nacelp
Re: Bosch ABS info,
Ross Myers
7749 guru needed....,
Barry Tisdale
- Re: 7749 guru needed....,
nacelp
- Re: 7749 guru needed....,
Ludis Langens
- Re: 7749 guru needed....,
nacelp
- Re: 7749 guru needed....,
Barry Tisdale
- Re: 7749 guru needed....,
nacelp
- Re: 7749 guru needed....,
Barry Tisdale
- Re: 7749 guru needed....,
nacelp
- Re: 7749 guru needed....,
Barry Tisdale
- Re: 7749 guru needed....,
Ludis Langens
- Re: 7749 guru needed....,
Barry Tisdale
- RE: 7749 guru needed....,
Jim Sloan
- RE: 7749 guru needed....,
Barry Tisdale
- Re: 7749 guru needed....,
TK
- Re: 7749 guru needed....,
Ludis Langens
- Re: 7749 guru needed....,
Ludis Langens
- Re: 7749 guru needed....,
Green
- Re: 7749 guru needed....,
Scot Sealander
- Re: 7749 guru needed....,
Green
- Re: 7749 guru needed....,
TK
Bins are us,
nacelp
- Re: Bins are us,
steve ravet
- <Possible follow-ups>
- RE: Bins are us,
Webmaster
- Bins are us,
nacelp
- RE: Bins are us,
Marteney, Steven J.
- Re: Bins are us,
Programmer
- RE: Bins are us,
Guenther,Max [ASCO/PA]
- Re: Bins are us,
Bob Valentine
- Re: Bins are us,
Ross Myers
- Re: Bins are us,
Ross Myers
- RE: Bins are us,
Webmaster
- Re: Bins are us,
Programmer
- Re: Bins are us,
Walter Sherwin
V6 ALDL Communications,
Jeremy Gonyou
GM 4 cylinder DIS,
Jurgen Hartwig
Non efi, ecm, CCC (Really OLD ECM!),
Mark Romans (ICQ#66838770)
77 caddy manual,
Swayze
RE: spking of octane was Re: Bins are us,
Marteney, Steven J.
GM Eprom Bin file,
Todd Burkard
Re: Pocket Programmer,
JTesta1966
Re: Pocket Programmer , brain fade,
John T. Martin
Re: Pocket Programmer/thanks,
JTesta1966
Fw: MSD sellin Crap Still,
nacelp
What is the dynamic range of the AFR sweeps across stoichiometric?,
mike mager
Quick question on coolant temp sensors,
Marteney, Steven J.
ignition map,
John_Calabrese
Stupid question on fuel pressure,
Marteney, Steven J.
Re: basic chevy tbi question,
Hotrodderzzz
Maps, and newbie stuff,
nacelp
Novice Question,
Todd Burkard
Calpak,
Jeff Flanary
Emulator Software,
Todd Burkard
Knock @ 1975 RPMs,
Barry Tisdale
Re: Pocket Programmer & Emulator,
JTesta1966
Second O2 sensor guestion,
nacelp
EGR,
Rich Vandervoort
Disposable meter,
nacelp
Knock sensor selection for 383 SBC,
Dave Zug
Turbo MAP & MAT interaction,
Webmaster
- Re: Turbo MAP & MAT interaction,
Scot Sealander
- Re: Turbo MAP & MAT interaction,
Jeff M
- <Possible follow-ups>
- RE: Turbo MAP & MAT interaction,
Webmaster
- Re: Turbo MAP & MAT interaction,
Scot Sealander
- manifold machining,
Thomas Matthews
- Re: manifold machining,
nacelp
- Re: manifold machining,
David Cooley
- Re: manifold machining,
nacelp
- Re: manifold machining,
Thomas Matthews
- efi chevy in a old ford,
Mike
- Re: manifold machining,
Frederic Breitwieser
- Re: manifold machining,
Frederic Breitwieser
- Re: Turbo MAP & MAT interaction,
nacelp
- Re: Turbo MAP & MAT interaction,
Scot Sealander
- RE: Turbo MAP & MAT interaction,
Webmaster
- RE: Turbo MAP & MAT interaction,
Webmaster
- RE: Turbo MAP & MAT interaction,
Malcolm Robb, LC 0112G
CCC Pinout needed,
nacelp
eprom,
Todd Burkard
2000 RPM knock,
Barry Tisdale
Re: GMECM Digest V2 #149,
Dig
Sensitivity of GM Knock Sensors,
Jim Wilson
Re: manifold machining,
cbrooks1
Fw: Need help with Opel...,
Ron Gregory
Bowling for scripts:,
Shannen Durphey
ever heard of this ECM?,
NickG
ONE WIRE O2 TO HEATED O2,
Todd Burkard
Sensitivity of GM Knock Sensors.,
Jim Wilson
Hardware/software questions...,
Steve Cauffiel
Programming Voltage,
Jeff Flanary
Digital Speedometer,
cwagner
another Memcal ?,
Todd Burkard
4.3L S10 questions,
Douglas Ratcliffe
Re: Hardware/software,
Steve Cauffiel
PROGRAMING QUESTION,
Todd Burkard
1228331 ECU Processor,
Malcolm Robb, LC 0112G
2.8 maf to ad conversion.,
Kevin Reynolds
TBI to TPI Conversion,
Todd Burkard
Quad 4 W41 binary file,
ronald . j . selberg
ECM in an Olds Bravada?,
Douglas Ratcliffe
Memcal ESC Filter Numbers,
Scot Sealander
CarBytes v3 is to be released as EFIlive v3,
Paul Blackmore
Old code 41,
nacelp
Re: Emissions and Chip Burning,
Peter Fenske
oscilloscope for windows,
Swayze
ebay TPI system,
Marc Piccioni
1227730 ECM on Ebay,
Shawn R. Lin
RE: 1228331 ECU Processor (P4 processor info),
Malcolm Robb, LC 0112G
Re: ASBX code is AMXY,
Pat Ford
free schematic software,
steve ravet
Carprom vs. Promedit,
Andrew K. Mattei
Re: ASBX code is AMXY - memory emulator,
mike mager
PID B/L INT,
nacelp
AED Vehicle Controller Interface and software for sale - calibration equipment,
Jason R. Haines
RE: Updated '747 ignition info,
nacelp
*ECU FILE FOR 165,
Todd Burkard
Re: Turbo_P4_Doc.pdf & BKZO,
ECMnut
AZTY BCC,
rr
Re: Memory Emulator (was ASBX code is AMXY),
mike mager
Re: Low Impedance Injector driver info,
JTesta1966
(no subject),
gloz
PID control stategy book?,
Jason R. Haines
Re: Turbo_P4_Doc.pdf,
Ron Gregory
Eprom???,
Jeff Flanary
PCM connectors,
nacelp
B/L INT Numbers,
nacelp
EFI POWWOW,
nacelp
165 to 730 conversion in F-body,
Marteney, Steven J.
Re: GMECM Digest V2 #166,
Dig
101,
Geoff Richards
Did I just learn something? - 8051,
mike mager
Re: 6811 Disassembler (was Memory Emulator, which was ASBX code is AMXY),
Donald Whisnant
Vortec TPI Manifold on the way,
Bob Groger
Conversion program,
Geoff Richards
Burning,
black maj
Re: 6811 Disassembler,
Donald Whisnant
MC68332 disassembler ?,
Daniel Henriksson
EFI - Does it really work like that ?,
Malcolm Robb, LC 0112G
MAF to speed density?,
Kelly Parker
It's alive!,
rr
adjusting fuel for gearing...,
Shane Buss
TBI Injector Rates,
Jeremy Gonyou
GM EFI parts for sale,
tim ganger
RE: Disassemblers - Generate compiler code-x's source code?,
Malcolm Robb, LC 0112G
BCC's for Australian apps,
Matt Tomlins
Trouble with Pocket Programmer,
Jeff Kopp
Where's Winbin?,
Andrew K. Mattei
ZIP Cleaning,
nacelp
30# injectors,
Marc Piccioni
generic question,
Ken & Rae Bauman
GM EFI parts,
J. T. Spilman
FYI - More cam-less engine news,
Marteney, Steven J.
Fuel pressure question, again,
Marteney, Steven J.
intersting link,
Mike Swayze
VSS,
black maj
Temp sensor,
nacelp
ALDL,
Jeff Flanary
one step back = one step up...,
Shannen Durphey
vortec distributor pn 1104051,
Marc Piccioni
build your own MAF???,
Kelly Parker
BLM cell boarder values,
Dave Zug.
- Re: BLM cell boarder values,
Ludis Langens
- <Possible follow-ups>
- RE: BLM cell boarder values,
Marteney, Steven J.
- Re: BLM cell boarder values,
Wayne Johnson
- RE: BLM cell boarder values,
Marteney, Steven J.
- RE: BLM cell boarder values,
Wayne Johnson
- Re: BLM cell boarder values,
turbo31 v6
- RE: BLM cell boarder values,
Marteney, Steven J.
- RE: BLM cell boarder values,
Marteney, Steven J.
- RE: BLM cell boarder values,
Wayne Johnson
My Blm Question,
Dave Zug.
Test please delete,
turbo31 v6
Turbo Tuning,
turbo31 v6
VE#1 + VE#2 can I zero ve#2 until 3200 rpm??,
olbap
Re: Turbo Tuning/VE,
Jeremy Gonyou
turbo tuning posts,
NickG
unsubscribing,
mike mager
16196911,
Jeff Flanary
TCC question in '165,
Marteney, Steven J.
Wide Range O2, Throttle by wire, Cat Conv, and EGR,
Rich Vandervoort
compiling/programing,
Mike Rolica
Notable stuff,
nacelp
POW WOW tenitive date,
nacelp
Re: Turbo Tuning author,
Jeremy Gonyou
Timing computations,
nacelp
MAF Mess,
Bill Shaw
Re: AXDH0179?,
ECMnut
FILTMPH,
Dig
source for junkyard pulls,
Swayze
Test bench,
Geoff Richards
ecm_testbench,
nacelp
2532 EPROM,
Jeff Flanary
Asynch vs Synch Injection,
Jeremy Gonyou
2532,
Jeff Flanary
Sorry no efi, National Organ, and tissue awaremess week,
nacelp
- RE: Sorry no efi, National Organ, and tissue awaremess week,
Carl Summers
- Re: Sorry no efi, National Organ, and tissue awaremess week,
Jeff M
- Re: Sorry no efi, National Organ, and tissue awaremess week,
Dave Zug.
- <Possible follow-ups>
- Re: Sorry no efi, National Organ, and tissue awaremess week,
David Cooley
- Re: Sorry no efi, National Organ, and tissue awaremess week,
Mark Romans (ICQ#66838770)
Re: Turbo tuning reviesed/injectors,
ECMnut
Meter,
nacelp
Favorite things about these lists...,
Steve Cauffiel
ECM's Exchange? Can a 1227303 replace 1227165?,
Mark Romans (ICQ#66838770)
- Re: ECM's Exchange? Can a 1227303 replace 1227165?,
Peter Gargano
- <Possible follow-ups>
- Re: ECM's Exchange? Can a 1227303 replace 1227165?,
Bob Valentine
- Re: ECM's Exchange? Can a 1227303 replace 1227165?,
Mark Romans (ICQ#66838770)
- Re: ECM's Exchange? Can a 1227303 replace 1227165?,
Peter Gargano
- 1227xxx --> 165, 277, 303, 752, 808, etc...,
Peter Gargano
- Re: 1227xxx --> 165, 277, 303, 752, 808, etc...,
Swayze
- 1227165 solder side scan of PCB?,
Peter Gargano
- Re: 1227165 solder side scan of PCB?,
Peter Gargano
BLM numbers,
Mark Romans (ICQ#66838770)
Newbie needs advice,
akallotte
'747 IAC stuff,
rr
Re: Source of PCM crimp "Micro-Pack" connectors,
Ross Myers
MAF sensor,
cwagner
ALDL connector,
Jeff Flanary
- Re: ALDL connector,
Swayze
- Re: ALDL connector,
Andrew Mattei
- '7429, first crack at it!,
Ernst denBroeder
- Re: '7429, first crack at it!,
Gregory A. Parmer
- Re: '7429, first crack at it!,
Ernst denBroeder
- Help!,
Ernst denBroeder
- Re: Help!,
nacelp
- Re: Help!,
rr
- [no subject],
Carl Summers
- Re: ALDL connector,
Shannen Durphey
- Re: ALDL connector,
Craig Marcho
- Re: ALDL connector,
Shawn R. Lin
- Re: ALDL connector,
steve ravet
- <Possible follow-ups>
- ALDL Connector,
Swayze
- ALDL Connector,
Mike Swayze
[no subject],
Pat Ford
Fw: Asynch/asynch,
nacelp
Re: Odp: Source of PCM crimp "Micro-Pack" connectors,
Bja1078
Re: '7429, first crack at it!,
Ernst denBroeder
The Turbo Shop URL,
nacelp
Illegal Operations,
Shawn R. Lin
Re: GMECM Digest V2 #183,
Alex Bratovic
RE: Illegal operation,
Dave Hempstead
87 to 89 ECM,
akallotte
7749 question,
Barry Tisdale
EFIlive v3 is due out this weekend,
Paul Blackmore
cal pak ID,
Dave Zug
Howell TPI book on Ebay,
Dave Zug
Re: GMECM Digest V2 #181,
Dig
Re: Crossfire Injection Question,
Ross Myers
TPI 327 Timing,
Todd Burkard
book,
Jeff Flanary
RedHat Linux Mentions Engine Controller in Embedded Systems PR,
Carl Summers
Air temps and fuel,
nacelp
'7727 on ebay $6,
Dave Zug
ECM's,
Todd Burkard
- <Possible follow-ups>
- RE: ECM's,
Eric Aos
- ecm's,
Matt Walters
- Re: ecm's,
Todd Burkard
- Re: ecm's,
timsiford
- Re: ecm's,
timsiford
- Re: ecm's,
donburns
- Re: ecm's,
donburns
- RE: ecm's,
Bob Valentine
- Re: ecm's,
WEG1192
- Re: ecm's,
ECMnut
- Re: ecm's,
Jeremy Gonyou
[No EFI] ABS Help Needed,
Mike Turner/ENGR/HQ/KEMET/US
- Re: [No EFI] ABS Help Needed,
Len sabatine
- Re: [No EFI] ABS Help Needed,
Shannen Durphey
- <Possible follow-ups>
- Re: [No EFI] ABS Help Needed,
Programmer
- Re: [No EFI] ABS Help Needed,
PHXSYS
- Re: [No EFI] ABS Help Needed,
Programmer
- Re: [No EFI] ABS Help Needed,
Programmer
- Re: [No EFI] ABS Help Needed,
Len sabatine
- Re: [No EFI] ABS Help Needed,
Rich Vandervoort
- RE: [No EFI] ABS Help Needed,
Malcolm Robb, LC 0112G
Messages,
Romans, Mark
GM ECM to run a rotary engine,
Jason R. Haines
Got my Brainmaster today....,
C and T
EFIlive v3 evaluation version is available at...,
Paul Blackmore
Another GM EFI link,
Ross Myers
ECM #,
nacelp
Big part sale,
nacelp
Re: CATS Disassembler comments,
Donald Whisnant
Need help: power programming eprom,
93 Formula
Re: ECM #,
Wayne Johnson
- Re: ECM #,
nacelp
- '90 Calpaks and PROMs,
TRAX
- Re: '90 Calpaks and PROMs,
Roger Heflin
- Re: '90 Calpaks and PROMs,
eclark
- Re: '90 Calpaks and PROMs,
Peter Gargano
- Re: '90 Calpaks and PROMs,
Peter Gargano
- Re: '90 Calpaks and PROMs,
TRAX
- Home Dyno,
Craig Marcho
- Re: Home Dyno,
Doug Dayson
- Re: Home Dyno,
Roger Heflin
- Re: Home Dyno,
Doug Dayson
- Re: Home Dyno,
Jason Weir
- Re: Home Dyno,
Rex Weatherford
- Re: '90 Calpaks and PROMs,
Roger Heflin
- Re: '90 Calpaks and PROMs,
TRAX
- Re: '90 Calpaks and PROMs,
Roger Heflin
- Re: '90 Calpaks and PROMs,
Peter Gargano
- Re: '90 Calpaks and PROMs,
TRAX
- Re: '90 Calpaks and PROMs,
Keith
- Re: '90 Calpaks and PROMs,
TK
- Erasing EPROMs - was Re: '90 Calpaks and PROMs,
Peter Gargano
- Re: '90 Calpaks and PROMs,
Roger Heflin
- ESC filters and Re: '90 Calpaks and PROMs,
Marc Randolph
- Re: ESC filters,
Peter Gargano
- Re: '90 Calpaks and PROMs,
Shannen Durphey
- Re: ECM #,
Shannen Durphey
- <Possible follow-ups>
- Re: ECM #,
Wayne Johnson
Re: Need help: Thanks & Other Software,
93 Formula
leaky injectors??,
John S. Gwynne
Running a 305 with '747,
Kurek, Larry
Re: 400 sbc in place of 350, 747 ecm,
Hotrodderzzz
Re: '90 Calpaks and PROMs,
Bob Valentine
2 bar MAP on a ZR1?,
Jason R. Haines
Re: GMECM Digest V2 #192,
Dig
bin uploaded,
Wayne Johnson
Re: DirectScan "RAM Scan Tool",
Christian Hack
Re: Home Dyno,
John_Calabrese
ID 1227747,
Omer N Ozkul
o2 Switching extremes, '165,
Dave Zug
IAT Sensor,
nacelp
Dead PB-10,
nacelp
Archives seem to be down,
Eric Deslauriers
- Re: Archives seem to be down,
Swayze
- Turbo V6 Tuniing continued,
Jeff M
- Re: Turbo V6 Tuniing continued,
Barry Tisdale
- Re: Turbo V6 Tuniing continued/Intronics Emulator update,
Jeff M
- Re: Turbo V6 Tuniing continued/Intronics Emulator update,
nacelp
- RE: Turbo V6 Tuniing continued/Intronics Emulator update,
Rudi Machilek
- Re: Turbo V6 Tuniing continued/Intronics Emulator update/checksum,
Jeff M
- Re: Turbo V6 Tuniing continued/Intronics Emulator update,
nacelp
- Re: Turbo V6 Tuniing continued,
Jeff M
- Re: Turbo V6 Tuniing continued,
Barry Tisdale
- Re: Turbo V6 Tuniing continued,
Jeff M
- Re: Turbo V6 Tuniing continued,
TK
- Re: Turbo V6 Tuniing continued,
Ludis Langens
- Re: Turbo V6 Tuniing continued + Benchtop ECU,
Barry Tisdale
- Re: Turbo V6 Tuniing continued + Benchtop ECU,
Jeff M
- Re: Turbo V6 Tuniing continued,
Jeff M
- Re: Turbo V6 Tuniing continued,
nacelp
- Re: Turbo V6 Tuniing continued,
Barry Tisdale
- Scanner sw for a '94 LT1 caprice.,
Rodney Fulk
- Re: Archives seem to be down,
steve ravet
blue streak 727,
Swayze
Voltage MAF with 1227730,
Ludis Langens
Spark Plugs....,
Rex Weatherford
- Re: Spark Plugs....,
nacelp
- <Possible follow-ups>
- Re: Spark Plugs....,
John_Calabrese
- Re: Spark Plugs....,
Programmer
- Re: Spark Plugs....,
Programmer
- Re: Spark Plugs....,
John_Calabrese
- Re: Spark Plugs....,
Gabe
- Re: Spark Plugs....,
Nico Over
- RE: Spark Plugs....torquemasters,
Carl Summers
- Re: Spark Plugs....torquemasters,
nacelp
- Spark Plugs...Indexing,
Romans, Mark
- Re: Spark Plugs...Indexing,
Mike from West Australia
- Re: Spark Plugs...Indexing,
nacelp
- Re: Spark Plugs...Indexing,
Romans, Mark
- Re: Spark Plugs...Indexing,
nacelp
- Re: Spark Plugs....,
nacelp
- RE: Spark Plugs....,
Rodney Fulk
- Re: Spark Plugs....,
John_Calabrese
Re: Turbo V6 Tuniing continued,
JTesta1966
Virus Warning,
Todd Burkard
165 ECM question, "single fire" vs "double fire",
Rick Lindstedt
- Re: 165 ECM question, "single fire" vs "double fire",
Romans, Mark
- Re: 165 ECM question, "single fire" vs "double fire",
Kevin Crain
- Re: 165 ECM question, "single fire" vs "double fire",
Romans, Mark
- Re: 165 ECM question, "single fire" vs "double fire",
Peter Gargano
- Re: 165 ECM question, "single fire" vs "double fire",
nacelp
- Re: 165 ECM question, "single fire" vs "double fire",
Swayze
- Re: 165 ECM question, "single fire" vs "double fire",
nacelp
- Re: 165 ECM question, "single fire" vs "double fire",
Peter Gargano
- Re: 165 ECM question, "single fire" vs "double fire",
Ludis Langens
- Re: 165 ECM question, "single fire" vs "double fire",
Kevin Crain
- Re: 165 ECM question, "single fire" vs "double fire",
Michael Davis
- Re: 165 ECM question, "single fire" vs "double fire",
Rick Lindstedt
- <Possible follow-ups>
- Re: 165 ECM question, "single fire" vs "double fire",
ECMnut
Re: Scanner sw for a '94 LT1 caprice.,
Kelly Parker
Seeking '749,
Bill Shaw
Re: 1981 Cadillac Fleetwood Brougham d'Elegance,
ECMnut
diacom on 95 3.1,
Wayne Johnson
Gal/Hr and Grm/Sec Info,
JTesta1966
Intercooler temps (again),
nacelp
IAT / MATs,
nacelp
Re :Intercooler/o2 volts/Injector constant,
Dig
Filtmph and boost tables followup,
Dig
16bit MAF xfer function in '165,
NickG
DIACOM Errors,
Scot Sealander
Re: Spark Plugs....now could be marelli computer,
Programmer
Intercooler info.,
nacelp
Trans Computer,
Rodney Fulk
Fun times. . .,
rr
RE: New ALDL 2 transistor circuit (critique),
Malcolm Robb, LC 0112G
'165 o2 switching v/s WOT level,
Dave Zug.
Problem reading original EPROM,
Marteney, Steven J.
- Re: Problem reading original EPROM,
Patrick G. Moore
- Re: Problem reading original EPROM,
Roger Heflin
- Re: Problem reading original EPROM,
Shannen Durphey
- Re: Problem reading original EPROM,
Romans, Mark
- <Possible follow-ups>
- RE: Problem reading original EPROM,
Marteney, Steven J.
- Re: Problem reading original EPROM,
Jeff Kopp
- Re: Problem reading original EPROM,
Programmer
- RE: Problem reading original EPROM,
Marteney, Steven J.
Quad4 Update (off topic),
Rex Weatherford
Re: 2 transistor interface,
Dig
Idle Learn,
Jeff Flanary
Cheap, (But is it crap?) GM Code reader F.S.,
Ross Myers
Benchtop ECU question,
Barry Tisdale
First chip ready,
Todd Burkard
Trinoic Engine Management System,
Jeremy Gonyou
Re: first chip done,
Russ Harms
Test - Ignore,
Walter Sherwin
Changing Injector Constant,
93 Formula
Burner for sale,
nacelp
91 Pont Brain Teaser,
Todd Burkard
Reorted O2 volts,
nacelp
Looking at Diacom,
nacelp
Looking for .bin,
Shannen Durphey
Base Pulse Widths,
nacelp
.Bin found,
Shannen Durphey
code 13 on 89 cavalier.. 730 ecm,
Mike Rolica
[no subject],
rrauscher
Diacom Help,
Rex Weatherford
Re:,
Jeremy Gonyou
16141470 ECU,
Scott Flanagan
Re:,
rrauscher
Re: EPROM won't program correctly,
Jim Wilson
Re:,
rrauscher
eprom id,
fat slug
DTC pop quiz,
Kelly Parker
EPROM Reader Problems Deleting Chip? EMERGENCY,
Scott Flanagan
ION Plugs,
Romans, Mark
The Physics of Racing,
Garfield Willis
Automobile Ride, Handling, and Suspension,
nacelp
Re: fuel pressure vs altitude,
nacelp
7747 Spark Map ?,
Marvin Johnson
Scope vs reported,
Barry Tisdale
Quad 4 code,
cwagner
0-25d C MAT IAT,
nacelp
A few lt1 ?'s,
Mike
EPROMs are programming AOK,
TRAX
Re: ALDL Reported BPW,
ECMnut
TPS Style Connectors: Where to find?,
Tom Meagher
PWs & misc.,
Roseanna Tisdale
Injector duty cycle formula?,
Rex Weatherford
- Re: Injector duty cycle formula?,
nacelp
- Re: Injector duty cycle formula?,
nacelp
- Re: Injector duty cycle formula?,
Rex Weatherford
- Re: Injector duty cycle formula? Graphing diagnostics,
nacelp
- Re: Injector duty cycle formula? Graphing diagnostics,
Rex Weatherford
- Re: Injector duty cycle formula? Graphing diagnostics,
nacelp
- Re: Injector duty cycle formula? Graphing diagnostics,
Rex Weatherford
- Re: Injector duty cycle formula? Graphing diagnostics,
nacelp
- Re: Injector duty cycle formula? Graphing diagnostics,
Rex Weatherford
- Re: Injector duty cycle formula? Graphing diagnostics,
nacelp
- Re: Injector duty cycle formula? Graphing diagnostics,
Rex Weatherford
- Re: Injector duty cycle formula? Graphing diagnostics,
nacelp
- Re: Injector duty cycle formula? Graphing diagnostics,
Rex Weatherford
RE: ecm newbie,
Daniel E. Griffin
ECM Code reader,
Dave Zug
Flying Cow?,
Garfield Willis
CPU Register Serial Data Readings.,
Ross Myers
Re: Scope vs reported + 02 as reported,
ECMnut
Whatsa 2732DC?,
nacelp
7749 ECU PW musings.....,
Roseanna Tisdale
EGOR Sneek Peek,
Garfield Willis
New 4-cyl 1227727 bin,
Ludis Langens
s2bin converter,
nacelp
Finding direction without a MAP...,
Shannen Durphey
Archive info,
Squash
749 questions,
Bill Shaw
ebay '727,
Swayze
Re: 730 ecm,
Daniel E. Griffin
ANLX-5474 update?,
Mika . Helander
RE: Astro Van PCM was--->Running a 305 with '747,
Kurek, Larry
Re: ANLX-5474 update?YES,
Chipsbyal
Piggy backing 165 ECM chips,
Rick Lindstedt
Coil Connector Question,
Squash
EPROM Switching,
nacelp
O2 volts diacom and the 1227148,
nacelp
Re: Delco controllers,
Pat Ford
Fabulous Service @ Needhams,
nacelp
.LT1 to .bin conversion,
Kelly Parker
Just soo obvious,
nacelp
Fuel Injector Connector - *the MALE side* ?,
Garfield Willis
- Re: Fuel Injector Connector - *the MALE side* ?,
nacelp
- Re: Fuel Injector Connector - *the MALE side* ?,
Garfield Willis
- Re: Fuel Injector Connector - *the MALE side* ?,
Jeff M
- Re: Fuel Injector Connector - *the MALE side* ?,
Garfield Willis
- Re: Fuel Injector Connector - *the MALE side* ?,
Jeff M
- Suppliers,
Garfield Willis
- Re: Suppliers,
Jeff M
- Re: Suppliers,
C. Brooks
- Re: Suppliers,
nacelp
- Re: Suppliers fyresleeving,
Jeff M
- Re: Suppliers fyresleeving,
Dave Zug
- Re: Suppliers fyresleeving,
Swayze
- Re: Suppliers fyresleeving,
Jeff M
- Re: Suppliers fyresleeving,
Jeff M
- Re: Fuel Injector Connector - *the MALE side* ?,
Garfield Willis
- Re: Fuel Injector Connector - *the MALE side* ?,
Thomas McCabe
- <Possible follow-ups>
- Re: Fuel Injector Connector - *the MALE side* ?,
ECMnut
- Re: Fuel Injector Connector - *the MALE side* ?,
Garfield Willis
- Re: Fuel Injector Connector - *the MALE side* ?,
Len sabatine
- P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface/Accel VIC,
Jeff M
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Swayze
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Len sabatine
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Len sabatine
- Re: P&H Injector Interface,
Swayze
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Romans, Mark
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Len sabatine
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Romans, Mark
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- P&H Injector Interface,
Romans, Mark
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Brent Obermiller
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Swayze
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Swayze
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- DataStream Definition,
Andy Whittaker - Chester UK
- Re: P&H Injector Interface,
Swayze
- Underhood Temperatures,
Garfield Willis
- Re: Underhood Temperatures,
Swayze
- Re: Underhood Temperatures,
Garfield Willis
- Re: P&H Injector Interface - the "Package"?,
Garfield Willis
- Re: P&H Injector Interface - the "Package"?,
Swayze
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Len sabatine
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Shannen Durphey
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Laura & Neil
- Re: P&H Injector Interface,
nacelp
- Re: P&H Injector Interface,
Garfield Willis
- Re: P&H Injector Interface,
Len sabatine
- Re: Fuel Injector Connector - *the MALE side* ?,
Rich Vandervoort
- Re: Fuel Injector Connector - *the MALE side* ?,
Rich Vandervoort
- Re: Fuel Injector Connector - *the MALE side* ?,
Walter Sherwin
Faulty Injector - Clues,
Dave Zug
akdx2088 vs akmh1143,
Marvin Johnson
pic of memcal,
Pat Ford
Nice Cheap Essential Tool for SMT work...,
Garfield Willis
pcm controlled nitrous,
Kelly Parker
RE: P&H Injector Interface,
Eric Aos
CSH, HQ closed for a few days,
nacelp
Not as OT as it might seem :),
Eric Aos
Prom Carriers,
nacelp
Chip upgrades,
KasaRyan
coil repair harness #'s,
Shannen Durphey
Back to Diacom,
nacelp
Software and ALDL,
MdntRdr1
EFIlive & SyTys,
Barry Tisdale
Re: Apologies,
Peter Gargano
request for ecu.files,
dkubus
PD: request for ecu.files,
dkubus
Simulator error??,
Shannen Durphey
Re: Convert 6 cyl tacho for use with 4 cyl,
black maj
re; p&h injector driver,
KasaRyan
Is this a good deal?,
Bob Valentine
tbi size,
KasaRyan
ecu files,
dkubus
Injectors: P&H and SAT - Part 1,
Garfield Willis
Injectors: P&H and SAT - Part 2,
Garfield Willis
Injectors: P&H and SAT - Part 3,
Garfield Willis
Injectors: P&H and SAT - Part 4,
Garfield Willis
Need help understanding Fuel tables.,
Kevin Reynolds
'87 Vette .bin needed,
NickG
New Member to List: Heads-Up Display Q's,
Dan Gentry
Re: Injector driver,
KasaRyan
Im going CRAZY, WOT tuning is being a bastard! Running out offuel,
olbap
Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel,
ECMnut
RE: Heads up display,
Dave Hempstead
<Possible follow-ups>
Re: Heads up display,
Kelly Parker
Re: Heads up display,
Kelly Parker
RE: Heads up display,
Mike Rolica
Re: Heads up display,
JTesta1966
Chip ID,
Todd Burkard
Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel,
olbap
RE: Im going CRAZY, WOT tuning is being a bastard! Running outoff uel,
Mike Rolica
RE: Im going CRAZY, WOT tuning is being a bastard! Running outoffuel,
olbap
RE: Im going CRAZY, WOT tuning is being a bastard! Runningoutoffu el,
Mike Rolica
RE: Im going CRAZY, WOT tuning is being a bastard! Runningoutoffuel,
olbap
RE: Im going CRAZY, WOT tuning is being a bastard! Running outoffuel,
olbap
fuel pump info,
steve ravet
Fuel, Fuel, Fuel... why dont I have enough,
olbap
Another VSS question,
John D. Bachman
Got some new injectors! Best way to rescale?>,
olbap
Let me clarify on my last injector post,
olbap
[Fwd: DIY_EFI_WWW],
steve ravet
cts,
Omer N Ozkul
Bigger injectors didnt fix it :(,
olbap
Re: cts mounting -,
KasaRyan
'165 switching both fans from the ECM?,
Kevin Crain
- Re: '165 switching both fans from the ECM?,
Shannen Durphey
- Re: '165 switching both fans from the ECM?,
Kevin Crain
- Re: '165 switching both fans from the ECM?,
Shannen Durphey
- Re: '165 switching both fans from the ECM?,
Kevin Crain
- Re: '165 switching both fans from the ECM?,
Shannen Durphey
- Re: '165 switching both fans from the ECM?,
Kevin Crain
- Re: '165 switching both fans from the ECM?,
Kevin Crain
- Re: '165 switching both fans from the ECM?,
Kevin Crain
- Re: '165 switching both fans from the ECM?,
Peter Gargano
- Re: '165 switching both fans from the ECM?,
Bruce Plecan
- Re: '165 switching both fans from the ECM?,
Kevin Crain
- Re: '165 switching both fans from the ECM?,
David C. Allen
- Re: '165 switching both fans from the ECM?,
Shannen Durphey
- Re: '165 switching both fans from the ECM?,
Peter Gargano
- Re: '165 switching both fans from the ECM?,
Shannen Durphey
- Intro,
Oliver Scholz
- <Possible follow-ups>
- Re: '165 switching both fans from the ECM?,
Jim Wilson
- Re: '165 switching both fans from the ECM?,
Kevin Crain
re;re;P&H injector interface,
Swayze
alfa turbo using gm,
Peter Gargano
Re: P&H Injector Interface - Wiring Approach,
Walter Sherwin
EGT,
Dave Zug
Re: Bigger injectors didnt fix it / injector sizing,
KasaRyan
Stumped at CSH, HQ,
Bruce Plecan
- Re: Stumped at CSH, HQ,
Len sabatine
- Re: Stumped at CSH, HQ,
Dave Zug
- <Possible follow-ups>
- Re: Stumped at CSH, HQ,
Bob Valentine
- Re: Stumped at CSH, HQ,
JTesta1966
- Re: Stumped at CSH, HQ,
JTesta1966
- RE: Stumped at CSH, HQ,
Mike Rolica
Another Intro,
D. Barry Stubbs
UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850,
olbap
RE: VSS Questions,
John D. Bachman
749 for sale,
cwagner
When to swap injectors,
trax
RE: Low O2 readings in Diacom at WOT.... please help!,
Marteney, Steven J.
Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
Bruce Plecan
- Re: Two barrel TBI must have a flaw, I give up.,
rr
- Re: Two barrel TBI must have a flaw, I give up.,
Scot Sealander
- <Possible follow-ups>
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
Bob Valentine
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- Re: Two barrel TBI must have a flaw, I give up.,
Dave Williams
- Re: Two barrel TBI must have a flaw, I give up.,
MdntRdr1
- Re: Two barrel TBI must have a flaw, I give up.,
olbap
- RE: Two barrel TBI must have a flaw, I give up.,
Mark M. Pikas
- RE: Two barrel TBI must have a flaw, I give up.,
Mark M. Pikas
- RE: Two barrel TBI must have a flaw, I give up.,
black maj
Re: UPDATE, Swapped to carb to rule out ignition.. and pseudo-intro..,
Tedscj
Re: UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850,
olbap
Re: UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850,
Tedscj
Re: UPDATE, Swapped to carb to rule out ignition.. and pseudo-intro..,
olbap
Fuel Trim Cell 18???,
Jody Shapiro
Knock sensor woes,
D Kunnath
Subject: Re: UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850,
Marvin Johnson
RE: UPDATE, Swapped to carb to rule out ignition.. and pseudo-int ro..,
Marteney, Steven J.
Injector Duty Cycle,
trax
Re: GMECM Digest V2 #245,
Mikepoore
Injector flow,
cwagner
TPI injectors for sale,
Marc Piccioni
References for Bosch Injection system and Direct injection system,
SiregarAbdi
References of Direct and indirect injection system for gasoline and diesel engine,
SiregarAbdi
Heat crazed mad scientist,
Kelly Parker
- Re: Heat crazed mad scientist,
Bruce Plecan
- Re: Heat crazed mad scientist,
Dave Zug
- Re: Heat crazed mad scientist,
Dave Zug
- Re: Heat crazed mad scientist,
SPECTRO COATING CORP.
- <Possible follow-ups>
- Re: Heat crazed mad scientist,
Andrew K. Mattei
- Re: Heat crazed mad scientist,
Kelly Parker
- Re: Heat crazed mad scientist,
Kelly Parker
- Re: Heat crazed mad scientist,
Programmer
- Re: Heat crazed mad scientist,
Kelly Parker
- Re: Heat crazed mad scientist,
Kelly Parker
- RE: Heat crazed mad scientist,
Marteney, Steven J.
- RE: Heat crazed mad scientist,
Mark M. Pikas
- RE: Heat crazed mad scientist,
Marteney, Steven J.
- RE: Heat crazed mad scientist,
John_Calabrese
- RE: Heat crazed mad scientist,
Mike Rolica
- RE: Heat crazed mad scientist,
John_Calabrese
- Re: Heat crazed mad scientist,
Kelly Parker
- RE: Heat crazed mad scientist,
Mike Rolica
- Re: Heat crazed mad scientist,
John_Calabrese
mopar conversion.mpfi using gmecm,
Mike Rolica
IAT range,
Marc Ethier
That a joke,
Bruce Plecan
1998 4L60E & ECM,
lpwcruzr
Fw: gas,
Bruce Plecan
Re: gas Grumpy rant,
MdntRdr1
Mefi, Mefi, Mefi....,
Shannen Durphey
Good Weekend,
Bruce Plecan
Someone was using CATS stuff?,
Marteney, Steven J.
RE: 4.6L Ford MAF was Re: Heat crazed mad scientist,
Mike Rolica
1997 Chev Chip Advice,
Jeffrey Scott
Cruise control and 92EFI,
Vinnie Moscaritolo
Re: wooden spacers,
Hotrodderzzz
Rev Limiter on '87 Corvette,
Aaron G Kallotte
- Re: Rev Limiter on '87 Corvette,
Dave Zug
- <Possible follow-ups>
- Re: Rev Limiter on '87 Corvette,
Jeremy Gonyou
- RE: Rev Limiter on '87 Corvette,
Mike Rolica
- RE: Rev Limiter on '87 Corvette,
Mike Rolica
- RE: Rev Limiter on '87 Corvette,
Marteney, Steven J.
- Re: Rev Limiter on '87 Corvette,
Aaron G Kallotte
- RE: Rev Limiter on '87 Corvette,
Jeremy Gonyou
- RE: Rev Limiter on '87 Corvette,
Mike Rolica
- RE: Rev Limiter on '87 Corvette,
Jeremy Gonyou
Mad scientist VS. The info highway,
Kelly Parker
MAP Sensor Pinouts,
Berg Family
RE: 4.6L Ford MAF,
Mike Rolica
tpi intakes,
Mike Rolica
1998 O2 sensor,
lpwcruzr
PASSlock system bypass?,
lpwcruzr
Microsoft Outlook 8.5 PROBLEMS,
Orin
[Admin] Plain Text Main only please,
Orin
Lambda sensors - Where, Why and how Much ?,
Malcolm Robb, LC 0112G
- <Possible follow-ups>
- Re: Lambda sensors - Where, Why and how Much ?,
Squash
- RE: Lambda sensors - Where, Why and how Much ?,
Malcolm Robb, LC 0112G
- RE: Lambda sensors - Where, Why and how Much ?,
KasaRyan
- RE: Lambda sensors - Where, Why and how Much ?,
Malcolm Robb, LC 0112G
- Re: Lambda sensors - Where, Why and how Much ?,
Squash
- Re: Lambda sensors - Where, Why and how Much ?,
Squash
- Re: Lambda sensors - Where, Why and how Much ?,
Squash
- RE: Lambda sensors - Where, Why and how Much ?,
Eric Bryant
- FW: Lambda sensors - Where, Why and how Much ?,
Paul Murphy
'84 Corvette .bin and/or ecu file needed,
Craig Marcho
Pump Shot,
trax
Ford New mailing list,
Bruce Plecan
730 4 cyl wiring ?,
Bruce Plecan
checksum error last byte,
Kelly Parker
Re: checksum error part two,
Kelly Parker
[Admin] Someone has return-receipt on,
Orin
AFDY/6022 .bin in incoming,
Shannen Durphey
Re: ODBD II ECM's in older cars?,
BBBDLGCON
727 ECU limits,
Dave Williams
- Re: 727 ECU limits,
Bruce Plecan
- Re: 727 ECU limits,
Bruce Plecan
- <Possible follow-ups>
- Re: 727 ECU limits,
ECMnut
- Re: 727 ECU limits,
KasaRyan
- Re: 727 ECU limits,
Dave Williams
- Re: 727 ECU limits,
Dave Williams
- Re: 727 ECU limits,
Dave Williams
- Re: 727 ECU limits,
Dave Williams
- Re: 727 ECU limits,
ECMnut
- Re: 727 ECU limits,
Dave Williams
- Re: 727 ECU limits,
Dave Williams
- Re: 727 ECU limits,
Dave Williams
Re: krazy ed,
KasaRyan
Memcal needed,
Dan Kunnath
ecm disassembly,
cwagner
turbo seca - maf>turbo,
KasaRyan
maf temps,
KasaRyan
Re: Memcal needed "got one",
Chipsbyal
.bin request,
D. Barry Stubbs
List - up?,
Bruce Plecan
Can a header collector leak make the o2 readings innacurate?,
olbap
Non EFI..Organ transplants..giving blood,
Mike Rolica
Idle Block Learn Cell ??,
Squash
PCM and Trannies,
Bruce Plecan
Min Cool for Closed Loop Fuel,
trax
Min Cool for CLF ...,
trax
'747 FL1&2 .ecu entries,
rr
Somewhat off topic: WTB: Old Laptop,
D. Barry Stubbs
Re: Somewhat off topic: WTB: Old Laptop,
Jeremy Gonyou
Re: ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??],
Squash
maf systems..,
Mike Rolica
Mustang stuff for sale/trade,
steve ravet
Re: Can a header collector leak make the o2 readings innacurate? - YES!,
KasaRyan
General tuning question - fuel economy,
Marteney, Steven J.
- Re: General tuning question - fuel economy,
Bruce Plecan
- <Possible follow-ups>
- Re: General tuning question - fuel economy,
JTesta1966
- RE: General tuning question - fuel economy,
Mike Rolica
- RE: General tuning question - fuel economy,
Marteney, Steven J.
- Re: General tuning question - fuel economy,
Squash
- RE: General tuning question - fuel economy,
Marteney, Steven J.
- RE: General tuning question - fuel economy,
Marteney, Steven J.
- RE: General tuning question - fuel economy,
Marteney, Steven J.
BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
rr
- <Possible follow-ups>
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
rrauscher
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
rrauscher
- RE: BPW and Cylinder Vol.?,
Pat Ford
- Re: BPW and Cylinder Vol.?,
Pat Ford
- RE: BPW and Cylinder Vol.?,
Mike Rolica
- RE: BPW and Cylinder Vol.?,
Pat Ford
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
rrauscher
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
rrauscher
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
Squash
- Re: BPW and Cylinder Vol.?,
Squash
Wide Band Oxygen Sensor - Request For Comments(Updated June 14 2000),
Paul
Fw: Kalmaker software,
Bruce Plecan
Wide Range OX sensor,
bcroe
Bosch (Leaded Fuel) 4 wire oxygen sensor PB-11,
Paul
Re: lb/hr calculation in ERROR (TunerCat vs. WinBin),
Squash
Can an ECM "learn" how to start the car better?,
Marteney, Steven J.
165 puzzling me again...,
Mike Rolica
EGT gauges,
Roger Heflin
winbin,
Mike Rolica
BIG WinBin vs TunerCat discrepencies,
trax
Spark Advance discrepency somewhat figured out,
trax
off topic question?,
Dave Evans
ALDL <--> PC interface,
D. Barry Stubbs
Another .bin request,
D. Barry Stubbs
Any other GM comms speeds?,
Ross Myers
- <Possible follow-ups>
- RE: Any other GM comms speeds?,
Malcolm Robb, LC 0112G
- RE: Any other GM comms speeds?,
Malcolm Robb, LC 0112G
- RE: Any other GM comms speeds?,
Malcolm Robb, LC 0112G
- Re: Any other GM comms speeds?,
Ross Myers
- RE: Any other GM comms speeds?,
Malcolm Robb, LC 0112G
- Re: Any other GM comms speeds?,
Ross Myers
Re: WinBin vs TunerCat ... VE (fuel tables) ... Eric ...,
Squash
Diacom frame save?,
Squash
Ludis, can I get info on your debug board,
Pat Ford
Changing 165 fuel delivery was "General tuning question - fuel ec onomy",
Marteney, Steven J.
Re: Changing 165 fuel delivery was "General tuning question - fuel economy",
Rick Lindstedt
RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Marteney, Steven J.
- <Possible follow-ups>
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Mike Rolica
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Marteney, Steven J.
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Marteney, Steven J.
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Mike Rolica
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Mike Rolica
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Marteney, Steven J.
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Mike Rolica
- Re: Changing 165 fuel delivery was "General tuning question - fuel economy",
Bruce Plecan
- Re: Changing 165 fuel delivery was "General tuning question - fuel economy",
Shannen Durphey
- Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy",
Shannen Durphey
- Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy",
Bruce Plecan
- Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy",
Shannen Durphey
- Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy",
Bruce Plecan
- Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy",
Brent Obermiller
- Re: Changing 165 fuel delivery,
Garfield Willis
- Re: Changing 165 fuel delivery,
Shannen Durphey
- Re: Changing 165 fuel delivery,
Garfield Willis
- Re: Changing 165 fuel delivery,
Rob Higgins
- Re: Changing 165 fuel delivery,
Bruce Plecan
- Re: Changing 165 fuel delivery,
Garfield Willis
ECM part numbers?,
steve ravet
RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Rick Lindstedt
RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Marteney, Steven J.
Vauxhall/Opel Broadcast codes.,
Malcolm Robb, LC 0112G
RE: Changing 165 fuel delivery was "General tuning question -fuel economy",
Mike Rolica
RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Squash
Honda/NGK O2 sensor part # versus Horiba/NGK O2 sensor part #s,
Jason R. Haines
RE: Changing 165 fuel delivery was "General tuning question - fue l economy",
Squash
Update,
Kelly Parker
1226870/1227165 conversion,
Jeff Kopp
727 RPM limit,
Dave Williams
MAF use and calibration,
NickG
Re: Changing 165 fuel delivery,
Aaron G Kallotte
730 ECM ..??,
Rick Lindstedt
factory remanufactured... ?,
Sean879
EPROM burning,
Dan Plaskett
AXSH2423 differences,
Malcolm Robb, LC 0112G
Re: Improper DIY_EFI behaviour-or BS from the sidelines,
Bruce Plecan
Fuel Filters,
Squash
Re: Improper DIY_EFI behaviour,
Bruce Plecan
MAP vs MAF FAQ,
Bruce Plecan
Re: MAP vs MAF FAQ,
John S. Gwynne
GARFIELD IS WAY WAY OUT OF LINE RE: EGOR, oxygen sensor, O2 sensor, wide band oxygen sensor,
Paul
Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
olbap
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
Bruce Plecan
- <Possible follow-ups>
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
KasaRyan
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
KasaRyan
- RE: Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
Mike Rolica
- RE: Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
olbap
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
KasaRyan
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's,
olbap
Truely sad news,
Bruce Plecan
Enough about Gar,
Bruce Plecan
You guys don't need to be warned do you?,
Kelly Parker
Info on Honda/NTK wide band oxygen sensors,
Paul
Chrysler ROMs (But EFI!!),
Ross Myers
Talented DIYer EE needed,
Bruce Plecan
TBI tuning headache,
olbap
Dwell meter on injectors,
olbap
microcontrollers slightly more powerful than a pic?,
Roger Heflin
Vortec FI,
Tedscj
manifold spacers,
Tedscj
ECM Selection FAQ,
Bruce Plecan
Abbrviations General EFI,
Bruce Plecan
- Message not available
- Re: Abbrviations General EFI,
D. Barry Stubbs
- <Possible follow-ups>
- Re: Abbrviations General EFI,
Chipsbyal
- Re:Abbrviations General EFI,
Gerald Pelnar
- RE: Abbrviations General EFI,
Mike Rolica
- Re: Abbrviations General EFI,
JTesta1966
- Re: Abbrviations General EFI,
black maj
- Re: Abbrviations General EFI,
black maj
- Re: Abbrviations General EFI,
black maj
- Re: Abbrviations General EFI,
Dave Williams
- Re: Abbrviations General EFI,
Squash
808 Hac,
Bruce Plecan
- Message not available
- <Possible follow-ups>
- Re: 808 Hac,
black maj
EPROM identification,
Jeff Kopp
'84 G-body with carbureted CCC,
gerhardr
big block fi,
Mike
Better suited for DIY_EFI??,
Shannen Durphey
FAQ ideas,
Bruce Plecan
- Re: FAQ ideas,
Shannen Durphey
- Re: FAQ ideas,
Ernst denBroeder
- <Possible follow-ups>
- Re: FAQ ideas,
BBBDLGCON
- FAQ ideas,
Dave Williams
- RE: FAQ ideas,
Mike Rolica
- Re: FAQ ideas,
Dave Williams
- Re: FAQ ideas,
Bob Valentine
- RE: FAQ ideas,
Marteney, Steven J.
- RE: FAQ ideas,
Mike Rolica
Web sites,
MdntRdr1
LS1 Air Mass Meters,
Ross Myers
DANGEROUS PRANK - NO EFI CONTENT,
John_Calabrese
165 Startup learning?,
Marteney, Steven J.
4 pin HEI interface ( I know it's old hat, Sorry),
Marvin Johnson
Re: ECM Selection FAQ,
Jeremy Gonyou
FAQ,
Jeremy Gonyou
- <Possible follow-ups>
- RE: FAQ,
Parker, Mark
- FAQ,
Bruce Plecan
Re: BIN differences,
John S. Gwynne
MAX232 chip is...,
Eric Deslauriers
This year's archives,
Orin
Fw: Kalmaker software Long, and boring FWIW,
Bruce Plecan
Re: J & L bodies, was ECM Selection FAQ,
Sean879
ECM # 16181333,
Peacock, Ken
383 TBI,
lpwcruzr
RE: Changing 165 fuel delivery was "General tuning,
Shannen
RE: Changing 165 / Nother Q,
Mike Rolica
? about forced induction,
Aaron G Kallotte
RE: MAF Flowbench (was Changing 165 / Nother Q),
Eric Aos
Back after needed break...tryna catch up,
Garfield Willis
.bin .ecu info,
black maj
Dead EPROM programmer,
Ludis Langens
Re: FAQ ideas and update on TPI 327 project,
Todd Burkard
Re: 383 TBI -air cleaner size,
KasaRyan
TBI pressure regulator mod,
Eric Deslauriers
Ground Loops (non aviation),
Bruce Plecan
RE: @#$@#$ Changing 165 fuel delivery was "General tuning questio n - fuel economy",
Marteney, Steven J.
gm altenators...and efi,
Mike Rolica
1999 GMC 5.3 liter Vortec,
c y k
Basic Stamp 2 / ALDL?,
Dan Gentry
How to get the LV8?,
Marteney, Steven J.
Re: Dead EPROM programmer, and question,
FieroMania
Heated or not O2 sensor,
lpwcruzr
Re: 1999 GMC 5.3 liter Vortec -,
KasaRyan
IGNORE - TEST,
Eric Deslauriers
Re: Knock Sensor Question,
Jim Wilson
- Re: Knock Sensor Question,
D Kunnath
- Re: Knock Sensor Question,
Craig Marcho
- Re: Knock Sensor Question,
Bruce Plecan
- Re: Knock Sensor Question,
D Kunnath
- Re: Knock Sensor Question,
Bruce Plecan
- Re: Knock Sensor Question,
D Kunnath
- Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Shannen Durphey
- Re: Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Shannen Durphey
- Re: Mods to '85 GM TPI ECM,
Ludis Langens
- Re: Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Bruce Plecan
- Re: Mods to '85 GM TPI ECM,
Shannen Durphey
- RE: Mods to '85 GM TPI ECM,
Craig Marcho
- Re: Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Romans, Mark
- Re: Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Romans, Mark
- Re: Mods to '85 GM TPI ECM,
Jim and Sharon Brady
- Re: Mods to '85 GM TPI ECM,
Ludis Langens
- Re: Mods to '85 GM TPI ECM,
Romans, Mark
- Re: Mods to '85 GM TPI ECM,
Bruce Plecan
- Re: Knock Sensor Question,
Barry Tisdale
- Re: Knock Sensor Question,
Bruce Plecan
- <Possible follow-ups>
- Re: Knock Sensor Question,
Squash
Fw: SOFTWARE LAWS,
Bruce Plecan
I tire of bruce plecans childish threats,
olbap
- Re: I tire of bruce plecans childish threats,
Bruce Plecan
- Re: I tire of bruce plecans JUST BE QUITE AND GO AWAY, PLEASE,
Jeff M
- Re: I tire of bruce plecans childish threats,
David Cooley
- Re: Then ignore it,
Shannen Durphey
- Re: I tire of bruce plecans childish threats,
Len Sabatine
- <Possible follow-ups>
- Re: I tire of bruce plecans childish threats,
Walter Sherwin
- Re: I tire of bruce plecans childish threats,
Jeff Kopp
- Re: I tire of bruce plecans childish threats,
ECMnut
- RE: I tire of bruce plecans childish threats,
Mike Rolica
- Re: I tire of bruce plecans childish threats,
Programmer
[Fwd: TBI pressure regulator mod],
Eric Deslauriers
Re: Mods to '85 GM TPI ECM,
Chipsbyal
GM Authorized????,
Shannen Durphey
Re: I tire of bruce plecans childish threats- just a clarification,
olbap
- Re: I tire of bruce plecan,
Garfield Willis
- UBB forum, was Re: I tire,
Ludis Langens
- Re: UBB forum, was Re: I tire,
Peter Gargano
- Re: UBB forum, was Re: I tire,
Craig Marcho
- Re: UBB forum, was Re: I tire,
gene l. clifford
- Re: SD (was UBB forum, was Re: I tire,
Andrew Mattei
- State/Federal Tax - was Re: Scoggin-Dickey,
Peter Gargano
- Re: State/Federal Tax - was Re: Scoggin-Dickey,
Dave Plummer
- Re: UBB forum, was Re: I tire,
Len Sabatine
- Re: I tire of bruce plecans childish threats- just a clarification,
Orin
- Re: I tire of bruce plecans childish threats- just a clarification,
David Cooley
- <Possible follow-ups>
- Re: I tire of bruce plecans childish threats- just a clarification,
Pat Ford
RE: Just ignore it,
Guenther,Max [ASCO/PA]
How to do 165 to 730,
Aaron G Kallotte
- <Possible follow-ups>
- RE: How to do 165 to 730,
Mike Rolica
- Re: How to do 165 to 730,
Jim and Sharon Brady
- Re: How to do 165 to 730,
Bruce Plecan
- Re: How to do 165 to 730,
Romans, Mark
- Re: How to do 165 to 730,
Bruce Plecan
- Re: How to do 165 to 730,
Romans, Mark
- Re: How to do 165 to 730,
Shannen Durphey
- Re: How to do 165 to 730,
Romans, Mark
- Re: How to do 165 to 730,
Bruce Plecan
- Re: How to do 165 to 730,
Romans, Mark
- Re: How to do 165 to 730,
Shannen Durphey
- Re: How to do 165 to 730,
Bob Valentine
- RE: How to do 165 to 730,
Mike Rolica
A small victory,
Marteney, Steven J.
GN coil ebay auction,
John_Calabrese
FOR SALE: LPE auction items on ebay,
Jason R. Haines
Automotive Circuit Protection - Part 1,
Garfield Willis
testing O2 sensor,
KasaRyan
eprom programers,
Mike Rolica
RE: Finding TDC (sorry, a bit off topic),
Mike Rolica
TBI fuel Pumps,
Bruce Plecan
Automotive Circuit Protection - Part 2,
Garfield Willis
Vendors Policies, Joke,
Bruce Plecan
Fuel Pressure Sensor,
Scott Flanagan
Interesting,
Bruce Plecan
GM Wiper circuit question,
Vinnie Moscaritolo
1999 5.3 liter Vortec V-8,
hi 50
- Re: 1999 5.3 liter Vortec V-8,
Bruce Plecan
- <Possible follow-ups>
- Re: 1999 5.3 liter Vortec V-8,
Chipsbyal
- Re: 1999 5.3 liter Vortec V-8,
Chipsbyal
- Re: 1999 5.3 liter Vortec V-8,
Chipsbyal
- Re: 1999 5.3 liter Vortec V-8,
ECMnut
- Re: 1999 5.3 liter Vortec V-8,
Chipsbyal
- Re: 1999 5.3 liter Vortec V-8,
hi 50
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
Chipsbyal
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
Chipsbyal
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
c y k
- Re: 1999 5.3 liter Vortec V-8,
Programmer
Archive idea,
Bruce Plecan
Automotive Circuit Protection - Part 3,
Garfield Willis
1999 5.3 liter Vortec V-8-B/S,
c y k
Trials and tribulations,
rr
EFI ramblings,
rr
'151 from a turbo sunbird?,
Tedscj
Programming 101,
MdntRdr1
Re: State/Federal Tax - was Re: Scoggin-Dickey,
Pat Ford
Interesting Diddy,
Bruce Plecan
Strange ALDL Blather,
Jeremy Gonyou
[ADMIN] Out of order messages,
Orin
RE: FAQ ideas, shifting gears, fuel pump thingy, 1st reply, no e fi of signifigance,
Marteney, Steven J.
RE: FAQ ideas, shifting gears, fuel pump thingy, 1st reply, no e fi of signifigance,
Mike Rolica
TBI SPACER ?,
Todd Burkard
Benching a '165,
Andrew Mattei
Duty Cycle and VE ??,
Squash
Miss under pressure....,
Shannen Durphey
Re: Peugots using GM ECUs?,
Ross Myers
Quick OBD-II question, I think,
Marteney, Steven J.
- Re: Quick OBD-II question, I think,
Andrew Mattei
- <Possible follow-ups>
- Re: Quick OBD-II question, I think,
Len Sabatine
- RE: Quick OBD-II question, I think,
Marteney, Steven J.
- RE: Quick OBD-II question, I think,
Len Sabatine
- Re: Quick OBD-II question, I think,
David Cooley
TC lockup problems,
TRAX
305 vs. 350 TPI 730 EPROMs,
TRAX
EGOR Pricing Announcement (Commercial),
Garfield Willis
Re: Technical Questions,
Andrew K. Mattei
89 memcal chip#'s, the other ones...,
Shannen Durphey
Closed loop tuning,
rr
How to read the anht_hac...,
TRAX
GM Performance EPROMS,
TRAX
web site help,
Jeffery Green
RE: Tailpipe Probing of EGO,
Mike Rolica
Newbie seeking advise,
Niinikoski, Juha
Seeking an '808 '165 hack,
black maj
Speed Density ECM,
Eric Norgard
Anyone know anything about negotiating severance packages?,
Kevin R
sending ecms,
Bruce Plecan
How to send,
Bruce Plecan
I was invited to, min EFI content,
Bruce Plecan
Re: TC lockup problems - 305 spark,
KasaRyan
EBAY tidbit,
Tedscj
Mystery .bin at incoming,
Shannen Durphey
Update from CSH, HQ No EFI Why Grumpy,
Bruce Plecan
AKSN1175,
Shannen Durphey
EFIinfo.doc,
Bruce Plecan
400 RPM Diacom,
Squash
OFF-LIST: Non-efi question,
Marteney, Steven J.
749 question -,
Barry Tisdale
source for bins,
Aaron G Kallotte
Electric Air Pump wanted,
terry_kelley
16198267 ID?,
Jon Fedock
VSS question (off topic),
Jeffery Green
Vortec 8 bolt to 12 bolt conversion,
Brent Obermiller
Re: ECM's MAF or MAP,
Daniel E. Griffin
New Definition Update,
Bruce Plecan
Q-Jet sec size,
rr
Re: 749 Question,
Dig
ECM interchangability?,
Daniel Houlton
New email...,
David Cooley
Re: Propane EFI,
Bruce Plecan
non - efi AFR heads for sale,
Marc Piccioni
Ambidextrous software,
Ludis Langens
ECM for sale..,
Marc Piccioni
Vortec Problem #2,
Brent Obermiller
bad .bin on FTP server,
NickG
Re: On The Fly Tuning (OTFT),
GM injection
PCM's measuring torque.,
Ross Myers
MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Scot Sealander
- Re: MAF BLM based tuning,
Romans, Mark
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Dan Plaskett
- Re: MAF BLM based tuning,
Dave Zug.
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Ludis Langens
- Re: MAF BLM based tuning,
Jim and Sharon Brady
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Romans, Mark
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Romans, Mark
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Ludis Langens
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Jim and Sharon Brady
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Jim and Sharon Brady
- Re: MAF BLM based tuning,
Bruce Plecan
- 255 MAF? (was blm based tuning),
Dave Zug
- Re: 255 MAF? (was blm based tuning),
Bruce Plecan
- Re: 255 MAF? (was blm based tuning),
Dave Zug
- Re: 255 MAF? (was blm based tuning),
Bruce Plecan
- Re: 255 MAF? (was blm based tuning),
Shannen Durphey
- Re: 255 MAF? (was blm based tuning),
Dave Zug
- Re: MAF BLM based tuning,
Jim and Sharon Brady
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Shannen Durphey
- Re: MAF BLM based tuning,
Bruce Plecan
- Re: MAF BLM based tuning,
Dave Zug
- Re: MAF BLM based tuning,
Bruce Plecan
- <Possible follow-ups>
- RE: MAF BLM based tuning,
Mike Rolica
Crankshaft sensor,
K.E. Towle
BINs needed,
K.E. Towle
persnickety '747s,
rr
PI closed loop algorithm for 1227747 ECU?,
Scott Lundahl
Re: bad .bins on FTP server,
NickG
Broken timing gear,
BBBDLGCON
Bench tests needed...,
Shannen Durphey
GM Efi to Rover 3.5,
Niinikoski, Juha
RE: ECM for forced induction,
Malcolm Robb, LC 0112G
FOR SALE: misc. calibration parts and a modified GM ECM on ebay,
Jason R. Haines
730 Memcal was... RE: MAF BLM based tuning,
Marteney, Steven J.
165 Main spark table,
Marteney, Steven J.
ECM info sought...,
Oliver Scholz
Ha, '747 anti-flood,
rr
Anyone else interested in Rochester FI??,
Shannen Durphey
Mandatory TC Lockup,
TRAX
- Re: Mandatory TC Lockup,
Roger Heflin
- Re: Mandatory TC Lockup,
Shannen Durphey
- Re: Mandatory TC Lockup,
TK
- Re: Mandatory TC Lockup,
Dave Zug
- Re: Mandatory TC Lockup,
Edmond
- Question about MAP,
Edmond
- Re: Question about MAP,
Bruce Plecan
- Re: Question about MAP,
Edmond
- ALDL stream recycle time,
Dave Zug.
- Re: ALDL stream recycle time,
John S. Gwynne
- Re: ALDL stream recycle time,
Dave Zug
- Re: ALDL stream recycle time,
Ludis Langens
- Re: ALDL stream recycle time,
Dave Zug.
- Re: ALDL stream recycle time,
Bruce Plecan
- Re: ALDL stream recycle time,
Dave Zug
- 2 bar 730 V8 was: Re: ALDL stream recycle time,
Dave Zug
- Re: 2 bar 730 V8 was: Re: ALDL stream recycle time,
Bruce Plecan
- Re: 2 bar 730 V8 was: Re: ALDL stream recycle time,
John S. Gwynne
- 730 ECM Swap,
Dan Townsend
- Re: 730 ECM Swap,
Dave Zug
- Re: 730 ECM Swap,
Bruce Plecan
- Re: 730 ECM Swap,
Michael Davis
- Re: 730 ECM Swap,
Bruce Plecan
- Re: 730 ECM Swap,
Dan Townsend
- Re: 730 ECM Swap,
Ludis Langens
- Re: ALDL stream recycle time,
John S. Gwynne
- Re: ALDL stream recycle time,
Dave Zug
- Re: ALDL stream recycle time,
John S. Gwynne
- Re: ALDL stream recycle time,
Dave Zug
- Re: Question about MAP,
rr
- Re: Mandatory TC Lockup,
TK
- Re: Mandatory TC Lockup,
Bruce Plecan
Inverted flight EFI?,
ECMnut
Thanks for the help,
K.E. Towle
puzzled by almighty memcal.,
Mike Rolica
engine control unit,
Don . F . Broadus
O2 Inte delays,
Bruce Plecan
new bins uploaded,
steve ravet
Connector Pins for '747 ECU,
Scott Lundahl
VSS ?,
Scott Lundahl
LTD1 Emulator,
Bruce Plecan
Delivery failure (shannen@grolen.com),
postmaster
Inline VSS,
Bob Valentine
LT1 Comp,
Programmer
Wierd TCC lockup ... can u explain it?,
TRAX
Anyone with X-fires for sale?,
Kevin R
Re: pt 2, new bins uploaded,
Shannen Durphey
RE: Abbreviations General EFI,
Mike Rolica
Hiway mode spark and fuel ??,
Squash
butterfly whistle, and cure,
Bruce Plecan
CCC Mods,
Bruce Plecan
Misc pics,,
Bruce Plecan
LT1 files ?,
Programmer
open loop non-cat bins,
Marc Piccioni
BCC ID help...,
FieroMania
Hello,
Rodney Fulk
Re: Format of WinBin .ECU file - tutorial/help page?,
Programmer
RE: Inverted flight EFI? (Grumpy's inna mood) Fuel temp,
Mike Rolica
RE: Archive utility,
Christian Hack
RE: LT1 files,
Speartech
EFI POW WOW,
Bruce Plecan
- RE: EFI POW WOW,
Rudi Machilek
- <Possible follow-ups>
- Re: EFI POW WOW,
Jeffrey Scott
- RE: EFI POW WOW,
Mike Rolica
- EFI POW WOW,
Bruce Plecan
- RE: EFI POW WOW,
Mike Rolica
- RE: EFI POW WOW,
Eric Aos
- RE: EFI POW WOW,
Squash
- EFI Pow wow,
Bruce Plecan
- EFI POW WOW,
Bruce Plecan
- Re: EFI POW WOW,
Bob Valentine
- Re: EFI POW WOW,
Scott Pearson
- Re: EFI POW WOW,
Jeffrey Scott
- Re: EFI POW WOW,
Scott Pearson
- Re: EFI POW WOW,
Programmer
- EFI Pow Wow,
Bruce Plecan
'747 and Proportional Stuff,
rr
GM Injector 17109596 ID,
Bob Valentine
1999 5.3 liter Vortec V-8-antitheft,
c y k
True definition of Knock,
Bruce Plecan
- Re: True definition of Knock,
Len Sabatine
- RE: True definition of Knock,
Carl Summers
- Huntington to Catalina,
Garfield Willis
- RE: Huntington to Catalina,
Carl Summers
- Re: Huntington to Catalina,
Garfield Willis
- RE: Huntington to Catalina,
Carl Summers
- Re: Huntington to Catalina,
Bruce Plecan
- Re: Huntington to Catalina,
Garfield Willis
- RE: Huntington to Catalina,
Carl Summers
- Re: Huntington to Catalina,
Bruce Plecan
- RE: Huntington to Catalina,
Carl Summers
- Re: Huntington to Catalina,
Garfield Willis
- RE: True definition of Knock,
Len Sabatine
- RE: True definition of Knock,
Carl Summers
- RE: True definition of Knock,
Carl Summers
- Re: True definition of Knock,
Bruce Plecan
- Re: True definition of Knock,
Len Sabatine
- Re: True definition of Knock,
Shannen Durphey
- <Possible follow-ups>
- Re: True definition of Knock,
Squash
- RE: True definition of Knock,
Eric Aos
- Re: True definition of Knock,
Squash
- Re: True definition of Knock,
Squash
- Re: True definition of Knock,
Bruce Plecan
- Re: True definition of Knock,
Dan Plaskett
- Memcal ESC Filter Numbers, was Re: True definition of Knock,
Ludis Langens
- Re: True definition of Knock,
Dan Plaskett
- Tuning a 727 or 730 with a Supercharger,
Dan Plaskett
- Re: Tuning a 727 or 730 with a Supercharger,
Bruce Plecan
- Re: Tuning a 727 or 730 with a Supercharger,
Dan Plaskett
- Re: Tuning a 727 or 730 with a Supercharger,
Bruce Plecan
- Re: Tuning a 727 or 730 with a Supercharger,
Dave Zug
- Re: True definition of Knock,
Dave Zug
- RE: True definition of Knock,
Squash
- RE: True definition of Knock,
Mike Rolica
Buyin Parts,
Bruce Plecan
Robbins Nugent chip holders for the 2732,
ECMnut
- Re: Robbins Nugent chip holders for the 2732,
Craig Marcho
- <Possible follow-ups>
- Re: Robbins Nugent chip holders for the 2732,
JTesta1966
- Re: Robbins Nugent chip holders for the 2732,
Programmer
- Re: Robbins Nugent chip holders for the 2732,
JTesta1966
- Re: Robbins Nugent chip holders for the 2732,
Mike Dillon
- Re: Robbins Nugent chip holders for the 2732,
JTesta1966
- Re: Robbins Nugent chip holders for the 2732,
JTesta1966
- Re: Robbins Nugent chip holders for the 2732,
Squash
- Re: Robbins Nugent chip holders for the 2732,
Squash
- Re: Robbins Nugent chip holders for the 2732,
Programmer
- Re: Re: Robbins Nugent chip holders for the 2732,
Mike Dillon
- Re: Robbins Nugent chip holders for the 2732,
ECMnut
Re: Tuning a 727 or 730 with a Supercharger,
Programmer
Re: LS1 Hack?,
Programmer
Aftermarket Bin dir,
Ross Myers
nother car dead..sorta efi...not really gm..ford parts for sale,
Mike Rolica
RE: nother car dead..sorta efi...not really gm..ford parts for sa le,
Mike Rolica
Engine swap computer & wiring question,
Tim De Coster
- Re: Engine swap computer & wiring question,
steve ravet
- Re: Engine swap computer & wiring question,
Tim De Coster
- Re: Engine swap computer & wiring question,
Bruce Plecan
- Re: Engine swap computer & wiring question,
Tim De Coster
- Re: Engine swap computer & wiring question,
Bruce Plecan
- Re: Engine swap computer & wiring question,
alexpeper
- Re: Engine swap computer & wiring question,
steve ravet
- Re: Engine swap computer & wiring question,
Tim De Coster
- Re: Engine swap computer & wiring question,
Shannen Durphey
- Re: Engine swap computer & wiring question,
Tim De Coster
- Re: Engine swap computer & wiring question,
Shannen Durphey
- Re: Engine swap computer & wiring question,
Ludis Langens
- Re: Engine swap computer & wiring question (& 3800SC),
Tim De Coster
- Re: Engine swap computer & wiring question (& 3800SC),
David Cooley
- Re: Engine swap computer & wiring question,
Shawn R. Lin
- <Possible follow-ups>
- RE: Engine swap computer & wiring question,
Don . F . Broadus
- Re: Engine swap computer & wiring question,
Jeremy Gonyou
- Re: Engine swap computer & wiring question,
Jeremy Gonyou
- Re: Engine swap computer & wiring question,
Programmer
- Re: Engine swap computer & wiring question,
K.E. Towle
time delay = degrees,
Don . F . Broadus
Fwd: RE: Oxygen Sensors,
David Cooley
Re: FYI - (or maybe not),
Squash
Chatting with a 730,
D. Barry Stubbs
Limited Duration Extra Turbo Boost,
Malcolm Robb, LC 0112G
Re: diy'er causing a recall,
KasaRyan
332 based ecms,
Mike Turner/ENGR/HQ/KEMET/US
'92 Y-body LT1 bin file needed.,
Craig Marcho
GM book on TPI/ Gas tank venting on TPI,
Vinnie Moscaritolo
4L60e transmission question,
Marvin Johnson
TCC lower temp,
lpwcruzr
Re: nother car dead..sorta efi...not really gm..ford parts for sale,
Fran and Bud
Commercial posting policy,
Orin
747 Rom Emulator,
Niinikoski, Juha
need help with '165 in Vette,
NickG
89 305 favorite?.,
Bruce Plecan
Casting Numbers,
Bruce Plecan
[no subject],
Paul Blackmore
reading flash chips... was: Re: Looking for a 16149396 ECM,
ECMnut
- Re: reading flash chips... was: Re: Looking for a 16149396 ECM,
Shawn R. Lin
- Re: reading flash chips... was: Re: Looking for a 16149396 ECM,
Scot Sealander
- <Possible follow-ups>
- Re: reading flash chips... was: Re: Looking for a 16149396 ECM,
ECMnut
- 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Romans, Mark
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Dave Zug
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Shannen Durphey
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Michael Davis
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Romans, Mark
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Jim and Sharon Brady
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Romans, Mark
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
TK
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Bruce Plecan
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Bruce Plecan
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Jim and Sharon Brady
prom,
Rich Baxter
Injector sizing for S/C applications,
Bruce Plecan
Accel DFI help maybe?,
J. T. Spilman
efi bin's cross reference,
Marc Piccioni
Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN,
Chipsbyal
Mode $0a on 7730,
D. Barry Stubbs
Dizzy to Coil pack,
black maj
It works,
Todd Burkard
Lean Cruise.,
Ross Myers
[no subject],
Pat Ford
ALDL on 747,
Squash
Numeric BCCs,
Bruce Plecan
427 ecu file?,
KasaRyan
HT502-Retro-Kit BIN Needed,
Walter Sherwin
Buick 3800 ECM's,
Speartech
Another Newbie Question,
c y k
aumh bin uploaded,
Bob Valentine
Saturn stuff,
Gerald Pelnar
RE: the 9th injector...,
Mike Rolica
- <Possible follow-ups>
- RE: the 9th injector...,
Ernst denBroeder
- RE: the 9th injector...,
Squash
- RE: the 9th injector...,
Mike Rolica
- Re: the 9th injector...,
Pat Ford
- RE: the 9th injector...,
Mike Rolica
- Re: the 9th injector...,
Pat Ford
- Re: the 9th injector...,
Pat Ford
- RE: the 9th injector...,
Mike Rolica
- Re: the 9th injector...,
Pat Ford
- RE: the 9th injector...,
Mike Rolica
- RE: the 9th injector...,
Pat Ford
- Re: the 9th injector...,
Pat Ford
- Re: the 9th injector...,
Pat Ford
- RE: the 9th injector...,
Mike Turner/ENGR/HQ/KEMET/US
- RE: the 9th injector...,
Mike Rolica
165 ECM idle question,
Rick Lindstedt
Re:3800 ECM's,
Speartech
Rev Limiter in AUJP,
Squash
2.8v6 tpi and a 730,
Ernst denBroeder
- Re: 2.8v6 tpi and a 730,
Bruce Plecan
- Re: 2.8v6 tpi and a 730,
rr
- Re: 2.8v6 tpi and a 730,
Ludis Langens
- <Possible follow-ups>
- RE: 2.8v6 tpi and a 730,
Mike Rolica
- RE: 2.8v6 tpi and a 730,
Mike Rolica
- RE: 2.8v6 tpi and a 730,
Mike Rolica
- RE: 2.8v6 tpi and a 730,
David Cooley
- RE: 2.8v6 tpi and a 730,
Mike Rolica
- RE: 2.8v6 tpi and a 730,
Mike Rolica
- RE: 2.8v6 tpi and a 730,
Mike Rolica
- Re: 2.8v6 tpi and a 730,
ECMnut
Another Newbie Question, part II,
hi 50
- Re: Another Newbie Question, part II,
Bruce Plecan
- Re: Another Newbie Question, part II,
Shannen Durphey
- Re: Another Newbie Question, part II,
Dave Zug
- <Possible follow-ups>
- Re: Another Newbie Question, part II,
Tedscj
- RE: Another Newbie Question, part II,
Mike Rolica
- RE: Another Newbie Question, part II,
Ernst denBroeder
Grand Prix digital dash [non efi],
Bob Valentine
[ADMIN] Attachments,
Orin
RE: was MAF BLM based tuning now cab manifold to port injection,
Mike Rolica
- Re: was MAF BLM based tuning now cab manifold to port injection,
Dave Zug.
- Re: was MAF BLM based tuning now cab manifold to port injection,
Jim and Sharon Brady
- <Possible follow-ups>
- RE: was MAF BLM based tuning now cab manifold to port injection,
Mike Rolica
- TPI '165 pulling timing after Cold start,
Gabe
- Re: TPI '165 pulling timing after Cold start,
Bruce Plecan
- Re: TPI '165 pulling timing after Cold start,
Gabe
- Re: TPI '165 pulling timing after Cold start,
Bruce Plecan
- Re: TPI '165 pulling timing after Cold start,
Gabe
- Re: TPI '165 pulling timing after Cold start,
Craig Marcho
- Re: TPI '165 pulling timing after Cold start,
Gabe
- Re: TPI '165 pulling timing after Cold start,
Bruce Plecan
- Re: TPI '165 pulling timing after Cold start,
Ludis Langens
- Re: TPI '165 pulling timing after Cold start,
Gabe
- Re: TPI '165 pulling timing after Cold start,
Bruce Plecan
- Re: TPI '165 pulling timing after Cold start,
Gabe
- Re: TPI '165 pulling timing after Cold start,
Bruce Plecan
- 2732 and 2732A programming Q's,
Craig Marcho
- Re: 2732 and 2732A programming Q's,
David Cooley
- Re: 2732 and 2732A programming Q's,
Len Sabatine
- Re: TPI '165 pulling timing after Cold start,
Romans, Mark
- Re: TPI '165 pulling timing after Cold start,
Bruce Plecan
- Re: TPI '165 pulling timing after Cold start,
Dan Plaskett
- Re: TPI '165 pulling timing after Cold start,
Bruce Plecan
- FreeScan 2.0.0,
Andy Whittaker - Chester UK
- Re: TPI '165 pulling timing after Cold start,
Gabe
- Re: TPI '165 pulling timing after Cold start,
Romans, Mark
- RE: was MAF BLM based tuning now cab manifold to port injection,
Mike Rolica
Buick ECM Trivia,
Ludis Langens
Re: ADDX 1657,
Pat Ford
Re: First quote in on chip carriers (Ouch),
Mike Dillon
C3 with 8192 ALDL,
Ludis Langens
Quick ECM ID,
Marteney, Steven J.
EPROM manufacturer and device IDs,
Ludis Langens
Another Newbie Question, part III,
hi 50
A post from the newbie brigade - I'm getting closer (1 of many),
KasaRyan
RE: A post from the newbie brigade - I'm getting closer (1 of man y),
Mike Rolica
Re: Mike V-> turbocharged z24 (was Re: 2.8v6 tpi and a 730),
ECMnut
ECU Bin Bytes 0x8000-0x8008,
Malcolm Robb, LC 0112G
Re: Mike V-> turbocharged z24 (was Re: 2.8v6 tpi a,
Shannen
95 S-blazer base timeing,
Matt S Bower
RE: TPI '165 pulling timing after Cold start,
Marteney, Steven J.
Re: Chip carrier buy for less than the price of a new car.,
Mike Dillon
Got VSS . . .,
Scott Lundahl
After Market Harness,
bcroe
Was Chip carrier now sockets,
Marc Piccioni
Hi,
black maj
- <Possible follow-ups>
- Re: Hi,
black maj
Need info/help on gm ecm conversion,
Mike Rolica
Calcing diff ratios ?,
Programmer
Injector R+R,
Bruce Plecan
spare ecm's '7730 & '7748,
Marc Piccioni
What the max rpms anyones used a gmecm on?,
Bruce Plecan
Injector Duty cycle calculations,
timsiford
- Re: Injector Duty cycle calculations,
Bruce Plecan
- Re: Injector Duty cycle calculations,
Roger Heflin
- Re: Injector Duty cycle calculations,
Scott Knight
- Re: Injector Duty cycle calculations,
Scot Sealander
- Re: Injector Duty cycle calculations,
Scott Knight
- <Possible follow-ups>
- Re: Injector Duty cycle calculations,
timsiford
- Re: Injector Duty cycle calculations,
timsiford
- Re: Injector Duty cycle calculations,
timsiford
- RE: Injector Duty cycle calculations,
Marc Piccioni
- Re: Injector Duty cycle calculations,
timsiford
- Re: Injector Duty cycle calculations,
timsiford
- Re: Injector Duty cycle calculations,
timsiford
- Re: Injector Duty cycle calculations,
ECMnut
- RE: Injector Duty cycle calculations,
Mike Rolica
- RE: Injector Duty cycle calculations,
Mike Rolica
- RE: Injector Duty cycle calculations,
Mike Rolica
- RE: Injector Duty cycle calculations,
Mike Rolica
- RE: Injector Duty cycle calculations,
Mike Rolica
- RE: Injector Duty cycle calculations,
Mike Rolica
- Re: Injector Duty cycle calculations,
timsiford
ATTN Scott: Re: Injector Duty cycle calculations,
timsiford
Injector PWs - was duty cycle,
Barry Tisdale
Re: Considering Injector Change..,
timsiford
big inch SBC EFI intake mainfold,
Marc Piccioni
- Re: big inch SBC EFI intake mainfold,
Bruce Plecan
- Re: big inch SBC EFI intake mainfold,
Garfield Willis
- <Possible follow-ups>
- Re: big inch SBC EFI intake mainfold,
ECMnut
- RE: big inch SBC EFI intake mainfold,
Marc Piccioni
- Re: big inch SBC EFI intake mainfold,
ECMnut
- RE: big inch SBC EFI intake mainfold,
Mike Rolica
- RE: big inch SBC EFI intake mainfold,
Mike Rolica
- RE: big inch SBC EFI intake mainfold,
Marteney, Steven J.
- RE: big inch SBC EFI intake mainfold,
Len Sabatine
- RE: big inch SBC EFI intake mainfold,
Squash
- Re: big inch SBC EFI intake mainfold,
WEG1192
- RE: big inch SBC EFI intake mainfold,
Mike Rolica
- RE: big inch SBC EFI intake mainfold,
Marteney, Steven J.
FS: TIF 1500 Printer/scanner,
Peter D. Hipson
Re: big inch SBC,
KasaRyan
2-Bar 730/AUJP,
Squash
RE: Kwarm Kickdown Enabled??,
Mike Rolica
Re: sbc in place of lt1,
Hotrodderzzz
2 Questions,
Rodney Fulk
1228707 ECM,
Bob Valentine
Re: more details sbc in place of lt1,
Hotrodderzzz
- Re: more details sbc in place of lt1,
Bruce Plecan
- Re: more details sbc in place of lt1,
Len Sabatine
- <Possible follow-ups>
- Re: more details sbc in place of lt1,
Andrew K. Mattei
- Re: more details sbc in place of lt1,
Scott & Jennifer Peitzsch
- Re: more details sbc in place of lt1,
Garfield Willis
- Re: more details sbc in place of lt1,
Bruce Plecan
- Re: more details sbc in place of lt1,
Garfield Willis
- Re: more details sbc in place of lt1,
Shannen Durphey
- Re: more details sbc in place of lt1,
Andrew Mattei
- Re: more details sbc in place of lt1,
Bruce Plecan
- Re: more details sbc in place of lt1,
Len Sabatine
- Re: Opti musings... (was Re: more details sbc in place of lt1),
Shannen Durphey
- Re: more details sbc in place of lt1,
Garfield Willis
- Re: more details sbc in place of lt1,
Len Sabatine
- Re: more details sbc in place of lt1,
Garfield Willis
- Re: more details sbc in place of lt1,
Len Sabatine
- Re: more details sbc in place of lt1,
Roger Heflin
- Re: more details sbc in place of lt1,
bcroe
- Re: more details sbc in place of lt1,
Ross Myers
Distrib needed,
Bruce Plecan
Re: Len Sabatine optispark to sbc,
Hotrodderzzz
turbo wastegate solenoid and MAP sensor,
NickG
EEPROM Code gurus,
John T. Martin
305 TPI bins,
Marteney, Steven J.
747 Rom Emulator / status,
Niinikoski, Juha
Up-n-running...,
Shannen Durphey
RE: 747 Rom Emulator / design,
Niinikoski, Juha
- Re: 747 Rom Emulator / design,
steve ravet
- Re: 747 Rom Emulator / design,
Steven Ciciora
- Message not available
- Re: 747 Rom Emulator / design,
thergen
- Re: 747 Rom Emulator / design,
rr
- Re: 747 Rom Emulator / design,
Steven Ciciora
- Re: 747 Rom Emulator / design,
rr
- Re: 747 Rom Emulator / design,
Steven Ciciora
- Re: 747 Rom Emulator / design,
Shannen Durphey
- TPI/SFI article,
Thomas Matthews
- Re: TPI/SFI article,
Kevin Crain
- Re: TPI/SFI article,
Dan Plaskett
- Re: TPI/SFI article,
Garfield Willis
- Re: 747 Rom Emulator / design,
steve ravet
- Re: 747 Rom Emulator / design,
rr
- Re: 747 Rom Emulator / design,
Ludis Langens
- <Possible follow-ups>
- RE: 747 Rom Emulator / design,
Eric Aos
- RE: 747 Rom Emulator / design,
Squash
- RE: 747 Rom Emulator / design,
Pat Ford
- RE: 747 Rom Emulator / design,
Eric Aos
- Re: 747 Rom Emulator / design,
rrauscher
- Re: 747 Rom Emulator / design,
Daniel N
RE: 747 checksum,
Niinikoski, Juha
Re: Nitrous Explosion,
Greg Hermann
730 to Nissan,
Bruce Plecan
Re: Up-n-running...vortec heads,
KasaRyan
Hello and help please,
David Posea
Diferent emulator projects,
Niinikoski, Juha
Writting to memcals,
Bruce Plecan
hotter plugs on hopped rebuild,
lpwcruzr
Bon Voyage, maties,
Garfield Willis
ecm upgrade,
Daniel E. Griffin
Can a GM ECM be tuned,
David Posea
Up-n-running, pt 2,
Shannen Durphey
Re: alternate plugs for al heads,
KasaRyan
Engine light on getting code 12,
Keith
TBI Fuel Pressure,
Brent Obermiller
EPROM SIMULATOR,
Swayze
1971/350 C10 EFI question,
Paul Beam
Bendix efi,
Phil Rickard
Male 12 PIN ALDL,
black maj
GM calibration stuff,
Bruce Plecan
GM 8-Pin Module,
WEG1192
Bin Library,
Bruce Plecan
methanol/ethanol/gas 730/727 bins,
Mike Swayze
EPROM Programming,
WEG1192
- Re: EPROM Programming,
rr
- Re: EPROM Programming,
Bruce Plecan
- Re: EPROM Programming,
Shannen Durphey
- <Possible follow-ups>
- RE: EPROM Programming,
Mike Rolica
- Re: EPROM Programming,
David Posea
- Re: EPROM Programming,
David Posea
- Re: EPROM Programming,
David Posea
- Re: EPROM Programming,
David Posea
- Re: EPROM Programming,
WEG1192
- Re: EPROM Programming,
WEG1192
- Re: EPROM Programming,
WEG1192
- Re: EPROM Programming,
WEG1192
- RE: EPROM Programming,
Mike Rolica
- RE: EPROM Programming,
Mike Rolica
- Re: EPROM Programming,
David Posea
- Re: EPROM Programming,
WEG1192
- Re: EPROM Programming,
WEG1192
- RE: EPROM Programming,
Mike Rolica
- Re: EPROM Programming,
WEG1192
- Re: EPROM Programming,
David Posea
- Re: EPROM Programming,
Programmer
- Re: EPROM Programming,
David Posea
- RE: EPROM Programming,
Mike Rolica
- RE: EPROM Programming,
Marteney, Steven J.
Fuel Hoses, Found,
Bob Valentine
- Re: Fuel Hoses, Found,
Shannen Durphey
- Re: Fuel Hoses, Found,
Brent Obermiller
- Re: Fuel Hoses, Found,
Bruce Plecan
- Re: Fuel Hoses, Found,
Shannen Durphey
- Re: Fuel Hoses, Found,
Brent Obermiller
- Re: Fuel Hoses, Found,
Jim Yeagley
- Re: Fuel Hoses, Found,
steve ravet
- archive location (was: Fuel Hoses, Found),
Glen Beard
- WBO2 question NTK box,
Carl Summers
- a/f ratio, conventional engines,
Frank F Parker
- Re: archive location (was: Fuel Hoses, Found),
Shannen Durphey
- Re: Fuel Hoses, Found,
rr
- <Possible follow-ups>
- Re: Fuel Hoses, Found,
WEG1192
archives slim efi content,
Mike Swayze
EPROM in place of BPROM,
Andrew Mattei
BFTP on 16191947, and 7730 for auction,
D. Barry Stubbs
Re: GM calibration stuff (college comp.),
Gregg Gruen
Kit Car Mag SFI,
Brent Obermiller
BCC help,
Bruce Plecan
90 or 91 Corvette wiring diagram,
Dan Plaskett
747 crossfire conversion question.,
Kevin R
Spark Plug Analysis,
Bruce Plecan
Re: EPROM Programmer,
WEG1192
NTK o2 sensor identification,
Phil Rickard
Re: 2000 Archives?,
WEG1192
BCC DAs,
Bruce Plecan
Re: backward injektors??,
David Posea
Re: EPROM tuning head start,
WEG1192
- Re: EPROM tuning head start,
Bruce Plecan
- Re: EPROM tuning head start,
Ludis Langens
- <Possible follow-ups>
- Re: EPROM tuning head start,
NickG
- Re: EPROM tuning head start,
WEG1192
- Re: EPROM tuning head start,
WEG1192
- Re: EPROM tuning head start,
WEG1192
- Re: EPROM tuning head start,
WEG1192
- Re: EPROM tuning head start,
NickG
- RE: EPROM tuning head start,
Marteney, Steven J.
- Re: EPROM tuning head start,
WEG1192
- Re: EPROM tuning head start,
WEG1192
RE: BLM cell boundaries, Was: EPROM Programming,
Mika . Helander
Macintosh Scantool Software...,
reizner
1227747 question,
Jeff Kopp
Pin functions determined by PROM?,
D. Barry Stubbs
Injector sizes / Rover 3.5 efi conversion,
Niinikoski, Juha
Test Only.,
Richard Wakeling
Re: Injector opening time,
bcroe
RE: tbi identified/ Injector sizes / Rover 3.5 efi conversion,
Niinikoski, Juha
Off Topic: How to manually solder SMD chips?,
Jose Carlos Felicio Rublescki
- Re: Off Topic: How to manually solder SMD chips?,
Matt S Bower
- Re: Off Topic: How to manually solder SMD chips?,
Andrew Mattei
- Re: Off Topic: How to manually solder SMD chips?,
steve ravet
- Re: Off Topic: How to manually solder SMD chips?,
Ernst denBroeder
- Re: Off Topic: How to manually solder SMD chips?,
Orin
- <Possible follow-ups>
- RE: Off Topic: How to manually solder SMD chips?,
Marteney, Steven J.
- RE: Off Topic: How to manually solder SMD chips?,
Marc Piccioni
- Re: Off Topic: How to manually solder SMD chips?,
Pat Ford
- Re:Off Topic: How to manually solder SMD chips?,
Dig
Changing PROM w/ batt connected,
D. Barry Stubbs
Re: ECMs interchangable?,
WEG1192
RE ecm upgrade,
Daniel E. Griffin
RE bcc help,
Daniel E. Griffin
bcc decodes please,
Michael Davis
TBI flow rate data clips from DIY-EFI,
Fran and Bud
Flex hoses for TBI's,
Fran and Bud
Factory no VATS chip ?,
Programmer
ECM calibrations for upgraded Xfire,
Dominic Sorresso
- Re: ECM calibrations for upgraded Xfire,
Bruce Plecan
- Re: ECM calibrations for upgraded Xfire,
Dominic Sorresso
- Re: ECM calibrations for upgraded Xfire,
Bruce Plecan
- Re: ECM calibrations for upgraded Xfire,
Dominic Sorresso
- Re: ECM calibrations for upgraded Xfire,
Bruce Plecan
- Re: ECM calibrations for upgraded Xfire,
Dominic Sorresso
- Re: ECM calibrations for upgraded Xfire,
Bruce Plecan
- Re: ECM calibrations for upgraded Xfire,
Dominic Sorresso
- Using the GMECM List - was Re: ECM calibr..,
Peter Gargano
- Re: Using the GMECM List - was Re: ECM calibr..,
Bruce Plecan
- Re: ECM calibrations for upgraded Xfire,
Bruce Plecan
- Re: ECM calibrations for upgraded Xfire,
Dominic Sorresso
- Re: ECM calibrations for upgraded Xfire,
Steven Ciciora
- Re: ECM calibrations for upgraded Xfire,
Dominic Sorresso
- Re: ECM calibrations for upgraded Xfire,
Bruce Plecan
- <Possible follow-ups>
- RE: ECM calibrations for upgraded Xfire,
Mike Rolica
- RE: ECM calibrations for upgraded Xfire,
Mike Rolica
- RE: ECM calibrations for upgraded Xfire,
Mike Rolica
- RE: ECM calibrations for upgraded Xfire,
Gorden Jennings
7747calibrations,
Dominic Sorresso
laptop scantool.,
Gregg Gruen
165 connectors,
Marteney, Steven J.
single vs double batch fire,
NickG
RE: Ford Codes,
Mike Rolica
hp-48G --slim efi content,
Mike Swayze
Return Receipt,
Thomas McCabe
Re: Haltech E6GM Questions,
WEG1192
ignition module,
chetwagner
Editing proms,
Bruce Plecan
- Re: Editing proms,
JN
- Re: Editing proms,
Jeff Kopp
- Gmepro,
TK
- <Possible follow-ups>
- Re: Editing proms,
timsiford
- RE: Editing proms,
Marteney, Steven J.
- RE: Editing proms,
David Cooley
- Re: Editing proms,
timsiford
- Re: Editing proms,
Bruce Plecan
- Re: Editing proms,
Dominic Sorresso
- Shorty plugs (off topic),
Dave Zug
- Re: Shorty plugs (off topic),
Bruce Plecan
- Re: Shorty plugs (off topic),
Shannen Durphey
- Re: Shorty plugs (off topic),
Dave Zug
- Re: Editing proms (editorial),
Bruce Plecan
- Re: Editing proms (editorial),
Dominic Sorresso
- Re: Editing proms (editorial),
Bruce Plecan
- Re: Editing proms (editorial),
Dominic Sorresso
- Re: Editing proms (editorial),
Kevin R
- Re: Editing proms (editorial),
Ludis Langens
- RE: Editing proms (editorial),
Carl Summers
- Re: Editing proms (editorial),
Kevin R
- Re: Editing proms (editorial),
Ludis Langens
- Re: Editing proms (editorial),
Kevin R
- Re: Editing proms (editorial),
Ludis Langens
- 89 YB vs FB Prom Problem with AC,
Romans, Mark
- Re: 89 YB vs FB Prom Problem with AC,
Shannen Durphey
- Re: 89 YB vs FB Prom Problem with AC,
Dan Townsend
- Re: Editing proms,
JTesta1966
Re: BCC help again,
WEG1192
Help! Peak-hold injector driver design,
Lou
Cold 350 TBI,
Guenther,Max [ASCO/PA]
looking for a bin,
Pat Ford
Re: Gmepro,
black maj
Some basic questions, please read,
JN
MAF and 89 Vet stuff,
Romans, Mark
- Re: MAF and 89 Vet stuff,
TK
- Re: MAF and 89 Vet stuff,
Romans, Mark
- Re: MAF and 89 Vet stuff,
Romans, Mark
- Re: MAF and 89 Vet stuff,
Bruce Plecan
- Dual EGT on Ebay,
Dave Zug
- Re: Dual EGT on Ebay,
Bruce Plecan
- Re: Dual EGT on Ebay(LINK),
Dave Zug
- Re: MAF and 89 Vet stuff,
Shannen Durphey
- RE: MAF and 89 Vet stuff,
J. T. Spilman
- Re: MAF and 89 Vet stuff,
Shannen Durphey
- Re: MAF and 89 Vet stuff,
Dominic Sorresso
- Re: MAF and 89 Vet stuff,
Romans, Mark
- Re: MAF and 89 Vet stuff,
Dominic Sorresso
- Re: MAF and 89 Vet stuff,
Romans, Mark
- Re: MAF and 89 Vet stuff,
Dominic Sorresso
- Re: MAF and 89 Vet stuff,
Shannen Durphey
- Re: MAF and 89 Vet stuff,
Dominic Sorresso
- Re: MAF and 89 Vet stuff,
JN
- <Possible follow-ups>
- Re: MAF and 89 Vet stuff,
NickG
Re: Ported MAF,
WEG1192
Re: 7730 ECM and Holley Projection,
WEG1192
Vortec Throttle Body,
Jeff Kopp
Re: ECM 1228746 Help,
WEG1192
VETTE Communication Problem.,
John Smith
2 Bar map sensor and 730 BIN,
timsiford
1227165 CTS trouble,
John Bachman
Re: Re: TPS boosters?,
rweatherford
Leading guestions,
Bruce Plecan
RE: Leading guestions+1,
Mike Rolica
ALDL European version,
Bert de Boer
She's alive,
Bruce Plecan
FW: question,
Mike Rolica
Rich in closed loop idle,
JN
O2 threads,
Bruce Plecan
- Re: O2 threads,
Matt S Bower
- RE: O2 threads,
Carl Summers
- Re: O2 threads,
Roger Heflin
- Re: O2 threads,
Shannen Durphey
- Re: O2 threads,
Scott Lundahl
- <Possible follow-ups>
- RE: O2 threads,
Mike Rolica
- Re: O2 threads,
Greg Hermann
- RE: O2 threads,
Squash
- RE: O2 threads,
Squash
- RE: O2 threads,
Niinikoski, Juha
- RE: O2 threads,
Mike Rolica
- RE: O2 threads,
Mike Rolica
Re: Tuning Eproms (was ECM 1228746 Help),
WEG1192
4wd range selector / vss in 747 application,
Niinikoski, Juha
305 TPI 4 Sale,
Bruce Plecan
Re: Mercury balancing,
KasaRyan
Fuel injector cleaning system?,
Gabe
Ford injectors,
Eric Norgard
- Re: Ford injectors,
Bruce Plecan
- Re: Ford injectors,
Dan Townsend
- Re: Ford injectors,
Jim and Sharon Brady
- <Possible follow-ups>
- Re: Ford injectors,
WEG1192
- Re: Ford injectors,
timsiford
- Re: Ford injectors,
timsiford
- Re: Ford injectors,
Bob Valentine
- Re: Ford injectors,
Dan Townsend
- Re: Ford injectors,
Bruce Plecan
- Re: Ford injectors,
Rick Lindstedt
- Re: Ford injectors,
Bruce Plecan
- Re: Ford injectors,
Rick Lindstedt
- Re: Ford injectors,
Kevin Crain
- Re: Ford injectors,
Bruce Plecan
- Re: Ford injectors,
Kevin Crain
- Re: Ford injectors,
Len Sabatine
- Re: Ford injectors,
Roger Heflin
- Re: Ford injectors (& Question),
Dave Zug
- Re: Ford injectors (& Question),
Romans, Mark
- Re: Ford injectors (& Question),
Roger Heflin
- Re: Ford injectors (& Question),
Dave Zug.
- Re: Ford injectors (& Question),
Roger Heflin
- Re: Ford injectors (& Question),
Dave Zug
- Re: Ford injectors (& Question) MORE,
Dave Zug
- RE: Ford injectors (& Question) MORE,
Carl Summers
- Re: Ford injectors (& Question) MORE,
Dave Zug
- RE: Ford injectors (& Question) MORE,
Carl Summers
- Re: Ford injectors (& Question) MORE,
Dave Zug.
- Re: Ford injectors (& Question) MORE,
Bruce Plecan
- Re: Ford injectors (& Question) MORE,
Roger Heflin
- Re: Ford injectors (& Question) MORE,
Dave Zug
- Re: Ford injectors (& Question) MORE,
Bruce Plecan
- Re: Ford injectors (& Question) MORE,
Dave Zug
- Re: Ford injectors (& Question) MORE,
Bruce Plecan
- Re: Ford injectors (& Question) MORE,
Dave Zug.
- Re: Ford injectors (& Question) MORE,
Bruce Plecan
- Re: Ford injectors (& Question) MORE,
Roger Heflin
- Re: Ford injectors (& Question) MORE,
Dave Zug
- Re: Ford injectors (& Question) MORE,
Roger Heflin
- Need Laptop,
Dan Townsend
- Re: Ford injectors (& Question) MORE,
Dave Zug.
- RE: Ford injectors (& Question) MORE,
Carl Summers
- Compiler?,
Kevin Crain
- Re: Compiler?,
Peter Gargano
- Re: Compiler?,
Scot Sealander
- Re: Compiler?,
Roger Heflin
- Re: Compiler?,
Peter Gargano
- Re: Compiler?,
Kevin \"Pass the Prozak\" Crain
- Re: Compiler?,
Dave Zug
- Re: Compiler?,
Scot Sealander
- Remanufactured GM code - was Re: Compiler?,
Peter Gargano
- Re: Remanufactured GM code - was Re: Compiler?,
Scot Sealander
- Re: Remanufactured GM code - was Re: Compiler?,
rr
- Re: Compiler?,
Dave Zug
- Re: Ford injectors (& Question),
Mark
- RE: Ford injectors (& Question),
Carl Summers
- Re: Ford injectors,
John S. Gwynne
- Re: Ford injectors,
Shannen Durphey
- Re: Ford injectors,
NickG
- RE: Ford injectors,
Mike Rolica
Re: Off idle transistions,
Shannen Durphey
Fw: Rich in closed loop idle (3rd post),
JN
7730/ANHT code problem,
chetwagner
RE: teknickle difikulty,
Mike Rolica
RE: Ford injectors (& Question),
Mike Rolica
Tweaking fueling values.,
Ross Myers
Injectors and AFPR,
Aaron G Kallotte
Re: teknickle difikulty V6,
Chipsbyal
PROMEDIT,
Mike Rolica
gmecm oN 383 mopar,
BBBDLGCON
Re: Closed Loop Disable,
WEG1192
Re: GMEpro question,
WEG1192
4L60e,
Brent Obermiller
Re: Editing proms (editorial),
ECMnut
newby,
Andrew Plunkett
SBC TPI,
Bruce Plecan
TPI,
Bruce Plecan
1226519 ECM,
Louis Baiani
Old,
Gerald Pelnar
Clarification on Memcal issues,
Tedscj
16183247,
Programmer
02 Voltage Calculation,
Berg Family
'749 questions,
Bill Shaw
Needed to measure AFR,
Bruce Plecan
reprogramming '747 limp home mode,
NickG
Digest Format?,
Scott Lundahl
C3 series or '7747 ECM for port fuel injection?,
Scott Lundahl
RamJet 350 spec/install instructions,
Jeff Kopp
Fuel filter # found...,
Shannen Durphey
ALDL info for 84 TBI Vette,
Louis Baiani
Plug colors,
Bruce Plecan
too much timing - past 45 crank degrees,
KasaRyan
I finally took the leap - general tuning questions,
KasaRyan
baffling turbo..,
Mike Rolica
165-730 conversion,
Mike Rolica
- Re: 165-730 conversion,
John S. Gwynne
- Re: 165-730 conversion,
Dave Zug
- 747 & 4cyls,
Andrew Plunkett
- Re: 747 & 4cyls,
Garfield Willis
- Re: 747 & 4cyls,
Bruce Plecan
- Re: 747 & 4cyls,
Garfield Willis
- Re: 747 & 4cyls,
Bruce Plecan
- Re: 747 & 4cyls,
Garfield Willis
- Re: 747 & 4cyls,
Scot Sealander
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls),
Andrew Plunkett
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls),
Bruce Plecan
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls),
Andrew Plunkett
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls),
Bruce Plecan
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls),
Garfield Willis
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls),
Bruce Plecan
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls),
Garfield Willis
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls),
Patrick G. Moore
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls),
Garfield Willis
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls),
Garfield Willis
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls),
Bruce Plecan
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls),
Shannen Durphey
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls),
Garfield Willis
RE: 89 YB vs FB Prom Problem with AC,
Mike Rolica
LT1 Editors,
Heelandtoe
ECM Availability,
Garfield Willis
- Re: ECM Availability,
Bruce Plecan
- Re: ECM Availability,
Garfield Willis
- Re: ECM Availability,
Bruce Plecan
- Re: ECM Availability,
Garfield Willis
- RE: ECM Availability,
Carl Summers
- Re: ECM Availability,
Garfield Willis
- RE: ECM Availability,
Carl Summers
- Re: ECM Availability,
Garfield Willis
- Re: ECM Availability,
Len Sabatine
- Re: ECM Availability,
Garfield Willis
- Re: ECM Availability,
Bruce Plecan
- Re: ECM Availability,
Len Sabatine
- Re: ECM Availability,
Garfield Willis
- Re: ECM Availability,
Frank F Parker
- Message not available
- Re: ECM Availability,
David Cooley
- Re: ECM Availability,
Len Sabatine
<Possible follow-ups>
Re: ECM Availability,
Squash
solid model,
Mike Rolica
Re: 332 Stim board - was '749 questions,
Bill Shaw
Firewall holes,
Bob Valentine
RE: Ford injectors (& Question) MORE,
Mike Rolica
Re: Need Laptop,
93 Formula
New Bin,
David Cooley
EPROM Emulator,
WEG1192
165.ecu file,
timsiford
Booster delete and MAF,
Bruce Plecan
Last injector question... probably,
akallotte
Apologies, Re: Distrib needed,
FieroMania
Strategy difference auto / man,
Niinikoski, Juha
Tuning MAF based cars in terms of Fueling,
timsiford
Re: Tuning in Open Loop for Newby,
WEG1192
injector drivers? what this?,
Mike Swayze
Errr Ford ?,
Bruce Plecan
pfi & 747's,
rr
Re: ECM for 4cyl aircraft,
KasaRyan
edelbrock bin,
KasaRyan
Voltage based MAF device,
Andrew K. Mattei
Re: ECM for 4cyl &Altitude (was 747 & 4cyls),
BBBDLGCON
FOR SALE: F-body rearend assy.,
Phil Rickard
RE: Errr Ford?,
Speartech
RE: 747 & 4cyls,
Mike Rolica
Re: Booster delete -electric vacuum pumps,
KasaRyan
eproms.,
Mike Rolica
Since were talking injectors......,
JN
1226519 ECM 160 baud ALDL output,
Louis Baiani
Re: ECM for 4cyl and altitude.,
Programmer
Simple fuel cut question.,
Ross Myers
O2 sensor placement,
Bruce Plecan
EFI POWWOW,
Bruce Plecan
Late MAFs,
Bruce Plecan
Cable and other help needed,
Scott Pearson
how do I read this chip?,
KasaRyan
Seeking 8051,
Bill Shaw
read problem solved,
KasaRyan
New Software,
Berg Family
[Fwd: Seeking 8051],
Bill Shaw
CarChat and cable ...,
timsiford
blm addys,
DenniS Zacek
- Re: blm addys,
Bruce Plecan
- <Possible follow-ups>
- Re: blm addys,
DenniS Zacek
- Re: blm addys,
Ross Myers
- Re: blm addys,
Programmer
- Re: blm addys,
Shannen Durphey
- 5.7L Y body 6 spd binary?,
TK
- Re: 5.7L Y body 6 spd binary?,
Shannen Durphey
- Re: 5.7L Y body 6 spd binary?,
Bruce Plecan
- Re: 5.7L Y body 6 spd binary?,
TK
- Re: 5.7L Y body 6 spd binary?,
Bruce Plecan
- Re: 5.7L Y body 6 spd binary?,
Shannen Durphey
- Re: 5.7L Y body 6 spd binary?,
David Cooley
- Re: 5.7L Y body 6 spd binary?,
Bruce Plecan
- Re: 5.7L Y body 6 spd binary?,
TK
- Re: 5.7L Y body 6 spd binary?,
TK
- Re: 5.7L Y body 6 spd binary?,
Ludis Langens
- Re: 5.7L Y body 6 spd binary?,
TK
- Re: 5.7L Y body 6 spd binary?,
Bruce Plecan
- Anyone need some 2532 eproms?,
TK
- Re: 5.7L Y body 6 spd binary?,
JN
- Re: blm addys,
Programmer
CCC stuff for sale,
Bruce Plecan
Frequency Maf,
Matt S Bower
Still having problems,
Louis Baiani
CarChat V1.1,
Rob Berg
TBI injectors,
chetwagner
Re: MAF vs. MAP,
WEG1192
Piggyback adapters for CalPak,
timsiford
New spark plugs,
David Cooley
Dead O2 sensor,
Ludis Langens
Re: Low RPM roughness,
KasaRyan
Off: Shoulda had ABS on the Hard Drive,
Shannen Durphey
403 Olds FI lives,
Bob Valentine
dual tbi on a big block,
ZZZ Temp-Gold
Found my 8051,
Bill Shaw
Diacom reports 23 battery volts?,
Jim Sloan
wiring diagram for 87 camaro - *no EFI* please help!!,
John_Calabrese
Mustang runnin a 730,
Bruce Plecan
AXAT9713.bin,
Jim Sloan
1227847,
Bruce Plecan
non efi SBC hyd. roller cam for sale,
Marc Piccioni
Fwd: Howto: Excel does binary/octal/hex/dec conversions,
Ernst denBroeder
Switching on P4 O/P's.,
Ross Myers
SBC intake center bolt holes,
KasaRyan
injecting oldsmobiles,
KasaRyan
ANWP3746.bin,
Jim Sloan
still going lean,
DenniS Zacek
BINs,
MdntRdr1
1227747 bins,
Bruce Plecan
1991 Y body 6 speed bin file,
Dan Plaskett
Re: Anyone need some 2532 eproms?,
JTesta1966
'7730 and nitromethane,
Phil Rickard
Cam Position Sensor,
Bruce Plecan
aldl cable/program,
chetwagner
Re: Mass,
Gerald Pelnar
Export .bin file for 16188051 (94/95 F-body),
Chris Bennight
Ebay Buick ECM,
WEG1192
aussie,
Daniel Collins
spark data on 1993 TBI 5.7 engine,
Jason R. Haines
Just FYI: numbers off PROM,
D. Barry Stubbs
Whattza C.A.R.S. ??,
Bruce Plecan
started the faq.,
steve ravet
scan toolz,
Mike Rolica
aldl cable,
Mike Rolica
Prom IDs,
Dan Plaskett
reprogramming TPIS chip,
Dan Plaskett
ALDL data,
Jason R. Haines
Ol Buick (or when Grumpy goes to play),
Bruce Plecan
scan tool progresss,
Mike Rolica
FWIW,
Bruce Plecan
HEi module output,
Louis Baiani
Re: Datamaster program,
WEG1192
Binary image for CRY or CRZ,
Peter Gargano
Carbytes (was: scan tool progresss),
Bill Shaw
ALDL interface diagnostic program,
Paul Blackmore
- Re: ALDL interface diagnostic program,
Peter Gargano
- Re: ALDL interface diagnostic program,
Dave Zug
- RE: ALDL interface diagnostic program,
Carl Summers
- Re: ALDL interface diagnostic program,
Dave Zug
- Re: ALDL interface diagnostic program,
Peter Gargano
- Re: ALDL interface diagnostic program,
Dave Zug
- Re: ALDL interface diagnostic program,
Andrew K. Mattei
- Re: ALDL interface diagnostic program,
Dave Zug
- RE: ALDL interface diagnostic program,
Carl Summers
- Re: ALDL interface diagnostic program,
Dave Zug
- Re: ALDL interface diagnostic program,
Ludis Langens
- B Codes,
Dave Zug
- Re: B Codes,
Steven Ciciora
- Re: B Codes,
Dave Zug
- Re: B Codes,
Ludis Langens
Prom ID,
Fran and Bud
Prom ID reminder,
Fran and Bud
Automotive Calculations,
Bruce Plecan
Re: vr ecu mapedit,
Daniel Collins
Re: Prom Burner,
WEG1192
Re: B Codes,
WEG1192
carbytes and carchat,
Mike Rolica
Re: LT-1 Heads,
WEG1192
CSH, HQ closin for a few days,
Bruce Plecan
- Re: CSH, HQ closin for a few days,
TK
- Re: CSH, HQ closin for a few days,
Romans, Mark
- Re: CSH, HQ closin for a few days,
Mike
- <Possible follow-ups>
- Re: CSH, HQ closin for a few days,
Programmer
- Re: CSH, HQ closin for a few days,
Programmer
Re: Prom Burner & EEPROM's,
Bob Valentine
1227429,
Bob Valentine
disassembly of 6803 code,
Arnaud Westenberg
Re: Carchat and scan tools.,
Rob Berg
AUJP Cold startup,
Squash
Beretta PROM use...,
Mike Frels
Bruce's e-addr at VA Hosp?,
Garfield Willis
quick EFI harness question,
Vinnie Moscaritolo
Re: DFI and Haltech,
WEG1192
RE: 4l60e or 4l80e ecm?,
Niinikoski, Juha
Dumb ALDL Question No. 432,
Scott Lundahl
7749 data,
chetwagner
Recommended reading...,
Shannen Durphey
Need some Help - 747 vs 288 PCM and Need 4.3 CPI Parts/Diagram,
LarryK5907
Parts for Sale AND question on calibrators,
Kurek, Larry
use of MAP in FI calcs,
Heelandtoe
Re: Promedit help,
WEG1192
acceleration stumble,
chetwagner
Introduction and 2 questions,
Mark Grave
Re: scope - was Dumb ALDL Question No. 432,
KasaRyan
Getting started,
Scott Pearson
Optoisolated ALDL Interface,
Ludis Langens
ECM Calibrators - FTP,
Kurek, Larry
CSH near reopening,
Bruce Plecan
map sensor id,
Mike Swayze
RE: Calibrators,
Kurek, Larry
Re: Calibrators - DRACS- whatever,
KasaRyan
High Order of the CSH wearers,
Bruce Plecan
CTS dampening,
Bruce Plecan
Re: 749 data,
Bill Shaw
hex editors & 8051 Qs,
Bill Shaw
GN injectors,
Scott & Jennifer Peitzsch
HEX TO DECIMAL,
Daniel Collins
747 bins ?,
Mike Dillon
Re: Programming questions,
WEG1192
AMRW bin application,
Brent Obermiller
my speedo is happy now,
KasaRyan
3300 dis = 3800 dis?,
david garnier
Re: GMECM Digest V2 #484,
Mike Dillon
N.O.S. Relay,
Phil Rickard
DIS+inj_timing...,
Shannen Durphey
Tuning - Fuel vs. Spark, questions,
Bob Valentine
why the big difference in ECUs?,
KasaRyan
CSH Road Trip,
Bruce Plecan
manual replacing auto tranny,
Washburn
Re: More tuning questions- 4.3 TBI,
Bob Valentine
TCC lock/unlock tuning,
Bob Valentine
Pump Shot table for 730,
timsiford
GM's move to CalPaks,
timsiford
- Re: GM's move to CalPaks,
steve ravet
- Re: GM's move to CalPaks,
Ludis Langens
- <Possible follow-ups>
- Re: GM's move to CalPaks,
thom358
- Re: GM's move to CalPaks,
Squash
- Re: GM's move to CalPaks,
David Cooley
- Re: GM's move to CalPaks,
steve ravet
- Re: GM's move to CalPaks,
David Cooley
- RE: GM's move to CalPaks,
Jim Sloan
- Re: GM's move to CalPaks,
Shannen Durphey
- RE: GM's move to CalPaks,
Carl Summers
- RE: GM's move to CalPaks,
David Cooley
- Re: GM's move to CalPaks,
thergen
- Re: GM's move to CalPaks,
Walter Sherwin
- Re: GM's move to CalPaks,
Shannen Durphey
- Re: GM's move to CalPaks,
Bruce Plecan
- Re: GM's move to CalPaks,
Walter Sherwin
- Re: GM's move to CalPaks,
Ludis Langens
- Re: GM's move to CalPaks,
steve ravet
- Re: GM's move to CalPaks,
ECMnut
- Re: GM's move to CalPaks,
Programmer
- Re: GM's move to CalPaks,
Ross Myers
- Re: GM's move to CalPaks,
Bill Shaw
Baud rates of ECMs,
timsiford
EFI stuff for sale,
Bruce Plecan
TBI injector pulse width range,
Scott Lundahl
2" butterflies on crossfire,
Kevin R
GM 2.8L V6 ALDL,
Shawn R. Lin
- Re: GM 2.8L V6 ALDL,
Peter Gargano
- Re: GM 2.8L V6 ALDL,
Scot Sealander
- Re: GM 2.8L V6 ALDL,
Shawn R. Lin
- Re: GM 2.8L V6 ALDL,
Scot Sealander
- Re: GM 2.8L V6 ALDL,
Shawn R. Lin
- Re: GM 2.8L V6 ALDL,
Peter Gargano
- Re: GM 2.8L V6 ALDL,
Shawn R. Lin
- Re: GM 2.8L V6 ALDL - Carbytes,
Dale Klein
- Re: GM 2.8L V6 ALDL - Carbytes,
Shawn R. Lin
- Re: GM 2.8L V6 ALDL,
Scot Sealander
- Re: GM 2.8L V6 ALDL,
Barry Tisdale
- Re: GM 2.8L V6 ALDL,
Shawn R. Lin
- Re: GM 2.8L V6 ALDL,
Dale Klein
- <Possible follow-ups>
- Re: GM 2.8L V6 ALDL,
s. douglas taylor
- Re: GM 2.8L V6 ALDL,
Ross Myers
- Re: GM 2.8L V6 ALDL,
Bill Shaw
- Re: GM 2.8L V6 ALDL,
Dig
New bin and Qs...,
Bill Shaw
Another strange injector question,
Scott Lundahl
SS10 Help,
Dr.Acacio
29C256 Flash works great!,
Shawn R. Lin
Impala SS PCM,
Bill Shaw
Re: knock sensor installation,
s. douglas taylor
68 Pontiac Firebird Downunder,
Daniel Collins
Catalytic Converters,
Bruce Plecan
"OLDPA3" question,
Niinikoski, Juha
Re: Diagnostics,
Bill Shaw
TBI with TPI ecm???,
Kevin R
Re: TBI throttle bore restriction,
WEG1192
WTB: Used EPROM burner and eraser,
D. Barry Stubbs
egr algorithm,
Daniel Collins
Re: EGR tube/exhaust manifold boss question,
Rich Vandervoort
Re: Main spark bias,
WEG1192
Re: Used EPROM burner and eraser,
akallotte
Connector pin spacing,
Marteney, Steven J.
2 730 Memcals for sale,
Marteney, Steven J.
Re: Driver Boards,
Garfield Willis
Re: 4.3L Throttle body and ECMs,
WEG1192
Re: Tuning 7747,
WEG1192
Lincoln - GM EFI Conversion,
Ross Myers
ALDL timing (was GM 2.8L V6 ALDL),
Paul Blackmore
aldl stuff,
Mike Swayze
Injector & Coil Driver Board Group Buy,
Bill Shaw
Traction Control,
Bill Shaw
MAP sensor location,
Scott Lundahl
RFD Keeper Thread, Anyone?,
Garfield Willis
EDI Distributor,
Matt S Bower
Re: Driver Boards (Cherry Driver Load Resistor),
David Rhoads II
Re: added to Introduction,
Brent
CSH, GN Update,
Bruce Plecan
Promgrammer an JRE,
Shannen Durphey
Fw: Bin File,
Bruce Plecan
Date: Wed, 20 Sep 2000 22:11:43 -0400,
Rich Vandervoort
eprom size?,
Daniel Collins
Dave Hempsteads address needed,
Bruce Plecan
would like to see a modded spark table.,
KasaRyan
MAF tables have a max of 255,
timsiford
Fw: LT-1,
Bruce Plecan
Re: 7747 tuning again,
WEG1192
- Re: 7747 tuning again,
Ludis Langens
- <Possible follow-ups>
- Re: 7747 tuning again,
WEG1192
- Re: 7747 tuning again,
WEG1192
- Re: 7747 tuning again,
WEG1192
- Re: 7747 tuning again,
WEG1192
- Re: 7747 tuning again,
WEG1192
- Re: 7747 tuning again,
NickG
- Re: 7747 tuning again,
Bob Valentine
- Re: 7747 tuning again,
rrauscher
- Re: 7747 tuning again,
Walter Sherwin
- Re: 7747 tuning again,
rr
- Re: 7747 tuning again,
Bruce Plecan
- Re: 7747 tuning again,
rr
- Re: 7747 tuning again,
Walter Sherwin
- Jet Performance scam?,
Reid Bishop
- Re: Jet Performance scam?,
TK
- Re: Jet Performance scam?,
Shannen Durphey
- Re: Jet Performance scam?,
Walter Sherwin
- Re: 7747 tuning again,
Kevin R
- RE: 7747 tuning again,
Reid Bishop
- Re: 7747 tuning again,
Ludis Langens
- Re: 7747 tuning again,
Walter Sherwin
- RE: 7747 tuning again,
Carl Summers
- RE: 7747 tuning again,
Mika . Helander
- Re: 7747 tuning again,
rrauscher
Part Throttle tuning for MAF (was MAF tables have a max of 255),
timsiford
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255),
Romans, Mark
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255),
JN
- <Possible follow-ups>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255),
timsiford
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255),
timsiford
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255),
timsiford
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255),
Daniel Collins
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255),
Daniel Collins
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255),
Daniel Collins
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255),
timsiford
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255),
timsiford
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255),
timsiford
Reading hex,
Kevin R
LTFC Values,
Ross Myers
Re: EFI POW WOW-photos,
Scott Pearson
Unswitched +5vdc in 730,
Squash
Off, worm to treasure:,
Shannen Durphey
RE: Mopar / 6803,
Geoff Allan
Data tables for a software tool,
Ludis Langens
RE: Part Throttle tuning for MAF (was MAF tables have a max of 25 5),
Marteney, Steven J.
ATTN: Gar or Bruce..exotic fuel AFR question.,
Phil Rickard
BCC decodes,
D. Barry Stubbs
747 wiring questions.,
Kevin R
Re: Scan tool question,
WEG1192
730 Spark Advance,
Bob Valentine
749 question(s),
Barry Tisdale
- <Possible follow-ups>
- Re: 749 question(s),
ECMnut
- Re: 749 question(s),
Dig
- Re: 749 question(s),
ECMnut
- Re: 749 question(s),
Lou
- Re: 749 question(s),
ECMnut
- Re: 749 question(s),
ECMnut
- Re: 749 question(s),
ECMnut
- Re: 749 question(s),
ECMnut
- RE: 749 question(s),
Eric Aos
- Re: 749 question(s),
Ross Myers
Re: quickie tuning method,
WEG1192
Re: Gar or Bruce..exotic fuel AFR question.,
ECMnut
Re: Spark advance tuning made simple and quick?,
WEG1192
Programming 808,
Daniel Collins
EFI Pow Wow... and 60+2 wheel pickup,
John S. Gwynne
93 LT1 Firebird,
chetwagner
Diacom Communication with a '7730,
Matt Charazinski
burner software improvements?,
Shannen Durphey
ALDL Stuff the ubiquitous connector,
Mike
Re: Jet Performance scam?,
Programmer
In flight,
Bruce Plecan
'165, '730 address space,
Dave Zug
GTech as a testing device,
D. Barry Stubbs
Re: Jet Performance scam? / now portable dyno,
ECMnut
Re: Jet Performance scam and others,
Programmer
Modifying VE Tables,
Ross Myers
EFI Pow Wow, Wow,
Bruce Plecan
- Re: EFI Pow Wow, Wow,
Kevin Crain
- <Possible follow-ups>
- Re: EFI Pow Wow, Wow,
Scott Pearson
- Re: EFI Pow Wow, Wow,
Squash
- RE: EFI Pow Wow, Wow,
Carl Summers
- Re: EFI Pow Wow, Wow,
Bruce Plecan
- Re: EFI Pow Wow, Wow,
Garfield Willis
- Re: EFI Pow Wow, Wow,
Bruce Plecan
- Re: EFI Pow Wow, Wow,
Bruce Plecan
- Calculating VE from MAF and MAP sensors,
Chris Bennight
- Re: Calculating VE from MAF and MAP sensors,
Bruce Plecan
- Re: Calculating VE from MAF and MAP sensors,
Chris Bennight
- Re: Calculating VE from MAF and MAP sensors,
Bruce Plecan
- Re: Calculating VE from MAF and MAP sensors,
Scot Sealander
- Re: Calculating VE from MAF and MAP sensors,
Chris Bennight
- Re: Calculating VE from MAF and MAP sensors,
Scot Sealander
- Re: EFI Pow Wow, Wow,
Dave Williams
Injector followup,
akallotte
Re: PCV valve for TPI,
WEG1192
EFI Pow wow (summary),
Bruce Plecan
Re: 7747 vs 8062,
s. douglas taylor
O2 voltages,
Bruce Plecan
Ho ho ho Bin library,
Bruce Plecan
Re: Calculating VE from MAF and MAP sensors,
Heelandtoe
Re: Long, and related to EFI ( was Re: PCV valve for TPI),
WEG1192
Re: SHORT, and related to EFI ( was Re: PCV valve for TPI),
ECMnut
- <Possible follow-ups>
- Re: SHORT, and related to EFI ( was Re: PCV valve for TPI),
WEG1192
- RE: SHORT, and related to EFI ( was Re: PCV valve for TPI),
Marteney, Steven J.
- Re: SHORT, and related to EFI ( was Re: PCV valve for TPI),
Greg Hermann
- Re: SHORT, and related to EFI ( was Re: PCV valve for TPI),
WEG1192
- Re: SHORT, and related to EFI ( was Re: PCV valve for TPI),
WEG1192
- Re: SHORT, and related to EFI ( was Re: PCV valve for TPI),
Scott Pearson
new ALDL project,
steve ravet
P+H Drivers,
Bruce Plecan
727 definition files,
DBonnes
text messages,
KasaRyan
Re: some longish lessons I do read! - 8625 anyone?,
KasaRyan
749 conversion,
chetwagner
My web page updated,
Ross Myers
Other vehicle manufacturer data dumps,
Louis Baiani
new 7730 ecu file,
steve ravet
DIY WB,
Bruce Plecan
AFR measurement was Re: O2 voltages,
Dave Williams
Nother thought,
Bruce Plecan
- RE: Nother thought,
Carl Summers
- Re: Nother thought,
Dave Zug.
- <Possible follow-ups>
- Re: Nother thought,
timsiford
- Re: Nother thought,
Squash
- Re: Nother thought,
timsiford
- Re: Nother thought,
timsiford
- Re: Nother thought,
timsiford
- Re: Nother thought,
JTesta1966
- Re: Nother thought,
JTesta1966
- Re: Nother thought,
timsiford
- Re: Nother thought,
Greg Hermann
- Re: Nother thought,
timsiford
anti-theft chips ?,
Programmer
Re:converting from lbs per hour,
DBonnes
Introduction to the List....,
OneSS2NV
CSH Closing temp,
Bruce Plecan
GM Development Stuff,
Kurek, Larry
Datamaster and emulator at the same time,
Keith
Re: injector size (was Nother thought),
NickG
Re: EGR tuning,
Programmer
749 conversion from 730??,
Jeffrey Scott
Buick turbo fiting?,
Scott Lundahl
CSH-HQ,
Mike Swayze
chysler obdii,
KasaRyan
Cold startup,
Squash
Re: '165 wanted,
ECMnut
Dragstrip Plus,
timsiford
where to buy EPROMs,
Keith
8051 disassembly,
Dale Klein
Cold-start craziness?,
OneSS2NV
16233396PCM - 51862 chip ?,
Daniel Henriksson
Re: 350 vs. 383,
DBonnes
350TPI Fuel Consump Problem,
Don Burns
New setup....need some help!,
David Tuschhoff
reading a Knock Sensor,
Keith
Fuel Econ and Hiway Mode,
Bob Valentine
- <Possible follow-ups>
- Re: Fuel Econ and Hiway Mode,
timsiford
- Re: Fuel Econ and Hiway Mode,
JTesta1966
- Re: Fuel Econ and Hiway Mode,
JTesta1966
- Re: Fuel Econ and Hiway Mode,
JTesta1966
- Re: Fuel Econ and Hiway Mode,
JTesta1966
- Re: Fuel Econ and Hiway Mode,
Programmer
- RE: Fuel Econ and Hiway Mode,
Guenther, Max [ASCO/PA]
- RE: Fuel Econ and Hiway Mode,
Jeremy Gonyou
- Re: Fuel Econ and Hiway Mode,
JTesta1966
- Re: Fuel Econ and Hiway Mode,
Tedscj
- Re: Fuel Econ and Hiway Mode,
Jeremy Gonyou
- Re: Fuel Econ and Hiway Mode,
Jeremy Gonyou
- RE: Fuel Econ and Hiway Mode,
Guenther, Max [ASCO/PA]
- RE: Fuel Econ and Hiway Mode,
Jeremy Gonyou
- Re: Fuel Econ and Hiway Mode,
Tedscj
- Re: Fuel Econ and Hiway Mode,
Tedscj
VIRUS FOUND IN DIY-EFI DIGEST,
Mike Swayze
16149396 ECM,
Jeremy Gonyou
flash programming,
DBonnes
Re:95 lt1 pcm,
Bill Shaw
1228746 vats and speed limiter,
UnderDogRS
747 spark over run,
Kevin R
EGR Q's (was: Fuel Econ and Hiway Mode),
Tim Welden
FW: Help- Idle is driving me NUTS!,
Reid Bishop
Pocket programmer users...,
David Tuschhoff
test? is the list still around?,
Pat Ford
Re: Way OT, now cam Q ( was EGR Q's (was: Fuel Econ and Hiway Mode)),
Rich Vandervoort
hi-way fuel and mask 88h,
rr
Closing Date for Combo Driver Buy,
DRhoads2
CSH, HQ Grand re-re- opening,
Bruce Plecan
EGR on/off temp,
Kevin R
RE: EGR Q's (was...),
Tim Welden
730 Pump Shot,
timsiford
- Re: 730 Pump Shot,
Bruce Plecan
- <Possible follow-ups>
- Re: 730 Pump Shot,
timsiford
- Re: 730 Pump Shot,
Squash
- Re: 730 Pump Shot,
timsiford
- Re: 730 Pump Shot,
timsiford
- Re: 730 Pump Shot,
Squash
- re: 730 Pump Shot,
NickG
- re: 730 Pump Shot,
timsiford
- Re: 730 Pump Shot,
timsiford
- re: 730 Pump Shot,
Squash
- re: 730 Pump Shot,
Bob Valentine
- re: 730 Pump Shot,
Heelandtoe
- re: 730 Pump Shot,
timsiford
- Re: 730 Pump Shot,
timsiford
- re: 730 Pump Shot,
Squash
- re: 730 Pump Shot,
timsiford
- re: 730 Pump Shot,
Squash
- Re: 730 Pump Shot,
Bob Valentine
- Re: 730 Pump Shot,
Programmer
- Re: 730 Pump Shot,
Squash
- Re: 730 Pump Shot,
timsiford
- Re: 730 Pump Shot,
timsiford
RE: EGR Q's (re Bruce..),
Tim Welden
- Newbie help,
Andrew McRory
- Re: Newbie help,
Shannen Durphey
- Re: Newbie help,
Bruce Plecan
- Re: Newbie help,
Andrew McRory
- Re: Newbie help,
rr
- Re: Newbie help,
Bruce Plecan
- Re: Newbie help,
Shannen Durphey
- Re: Newbie help,
Andrew McRory
- Re: Newbie help,
Bruce Plecan
- Re: Newbie help,
Andrew McRory
- Re: Newbie help,
Bruce Plecan
- Re: Newbie help,
Shannen Durphey
- Re: Newbie help,
Andrew McRory
- Re: Newbie help,
Ludis Langens
- Re: Newbie help,
D. Barry Stubbs
- Re: Newbie help,
Ludis Langens
- <Possible follow-ups>
- RE: EGR Q's (re Bruce..),
Bob Valentine
- RE: EGR Q's (re Bruce..),
Marteney, Steven J.
- RE: EGR Q's (re Bruce..),
Bob Valentine
- RE: EGR Q's (re Bruce..),
Marteney, Steven J.
EGR disabled and Knocking,
Brent
commenting of disassembled code,
Dale Klein
Weird problem - any ideas?,
Roger Heflin
Tuning question for 730 ECM,
Edmond
Scanning software,
Todd Burkard
Re: tuning q for 730 ecm,
KasaRyan
Broken Combo driver buy page,
DRhoads2
Oxygen Sensor Replacement,
Louis Baiani
Re: Newbie help,
WEG1192
Pre 1999 Archives,
timsiford
Programmer choices....,
D. Barry Stubbs
Re: Injector DC again/N2O,
timsiford
GM 3 wire O2 sensor dilemma,
ECMnut
7747 spark control questions.,
Kevin R
- Re: 7747 spark control questions.,
Shannen Durphey
- Re: 7747 spark control questions.,
rr
- <Possible follow-ups>
- Re: 7747 spark control questions.,
Programmer
- Re: 7747 spark control questions.,
Programmer
- Re: 7747 spark control questions.,
Programmer
- Re: 7747 spark control questions.,
Shannen Durphey
- Re: 7747 spark control questions.,
rr
- Re: 7747 spark control questions.,
Walter Sherwin
- Re: 7747 spark control questions.,
Bruce Plecan
- Re: 7747 spark control questions.,
Walter Sherwin
- Re: 7747 spark control questions.,
Bruce Plecan
- Re: 7747 spark control questions.,
Shannen Durphey
- Re: 7747 spark control questions.,
Len Sabatine
- Re: 7747 spark control questions.,
Walter Sherwin
- Re: 7747 spark control questions.,
Bruce Plecan
- Re: 7747 spark control questions.,
Kevin R
- Re: 7747 spark control questions.,
Walter Sherwin
- Re: 7747 spark control questions.,
Bruce Plecan
- Hmm....,
Edmond
- Re: 7747 spark control questions.,
Squash
- Re: 7747 spark control questions.,
Programmer
- Re: 7747 spark control questions.,
Programmer
- Re: 7747 spark control questions.,
Programmer
- Re: 7747 spark control questions.,
ECMnut
- Re: 7747 spark control questions.,
Programmer
- Re: 7747 spark control questions.,
rrauscher
- Re: 7747 spark control questions.,
Squash
- Re: 7747 spark control questions.,
Squash
- Re: 7747 spark control questions.,
Squash
- Re: 7747 spark control questions.,
Squash
- Re: 7747 spark control questions.,
Squash
- Re: 7747 spark control questions.,
Squash
ABTD 0731 Memcal,
Bob Valentine
howell730 bin file,
chetwagner
Re: TCC Stuff,
OneSS2NV
TC lockup & 749 ECU,
Barry Tisdale
A few questions.....,
David Tuschhoff
Re: Inverted flight EFI?/HPTV,
Dave Zug
Other readings,
Todd Burkard
Re: Question about MAP,
timsiford
Re: TC lockup,
timsiford
Re: heater o2,
KasaRyan
ot: toytoa ecms,
Pat Ford
Re: Oxygen Sensor Replacement - Try A Redundant Ground Lead,
Walter Sherwin
BOUNCE gmecm@lists.diy-efi.org: Admin request of type /^\s*config\b/i at line 5 (fwd),
Orin
two new papers, '747 stuff.,
rr
- Re: two new papers, '747 stuff.,
Bruce Plecan
- RE: two new papers, '747 stuff.,
Reid Bishop
- Re: two new papers, '747 stuff.,
steve ravet
- <Possible follow-ups>
- RE: two new papers, '747 stuff.,
rrauscher
- Re: two new papers, '747 stuff.,
ECMnut
FREE efi stuff,
Bob Valentine
Re: ALDL stream recycle time,
Ross Myers
Re: toytoa ecms,
Ross Myers
GN injector offset,
Scott & Jennifer Peitzsch
AKFU bin,
Programmer
749 ( typhoon ) Code in a 730 ECU with a V8,
Gorden Jennings
Caddy-Olds TB,
Swayze
new paper,
steve ravet
Hypertech type carrier,
akallotte
700R4 rebuild document,
Ed Hilker
RE: Hmm....,
Don . F . Broadus
1227727 INJ.DRV.,
Swayze
Hypertech connector,
akallotte
Problem with 3.1V6 (Ignition related),
Scott Feaver
3.1 v6 in Chevy Lumina 1227727 ecm with AMAS 7004 PROM,
Lafferty, John
Utility testers needed...,
Anders Hogrelius SdU
Possible error at CSH, HQ,
Bruce Plecan
- Laptop Question,
Dan Townsend
- Re: Laptop Question,
Roger Heflin
- Re: Laptop Question,
Bruce Plecan
- Re: Laptop Question,
Dan Townsend
- Re: Laptop Question,
Dan Townsend
- Re: Laptop Question,
Bruce Plecan
- Re: Laptop Question,
Roger Heflin
- Re: Laptop Question,
Bruce Plecan
- Re: Laptop Question,
Roger Heflin
- Re: Laptop Question,
TK
- Re: Laptop Question,
Bruce Plecan
- Re: Laptop Question,
Len Sabatine
- Re: Laptop Question,
NRG
- RE: Laptop Question,
Craig Marcho
- Quick question,
NRG
- Re: Quick question,
Shannen Durphey
- Re: Quick question,
Ludis Langens
- Re: Quick question,
Dave Zug
- 730 ECM,
Dan Townsend
- Re: 730 ECM,
Mike Frels
- Re: 730 ECM,
steve ravet
Re: Laptop Question,
Jeffrey Scott
Application for ASCP bin?,
Roger Heflin
Fun with OTC 4000, and 2 questions...,
OneSS2NV
Automotive Oscilloscope,
Daniel Collins
'747 IAC idle reset,
rr
Re: Scam?,
WEG1192
ancient Dos laptops,
Swayze
More on '747 IAC & idle,
rr
Tuning for new injectors,
Scott & Jennifer Peitzsch
Re: TPI 5.7L and SVO injectors,
WEG1192
- Re: TPI 5.7L and SVO injectors,
Dave Zug
- <Possible follow-ups>
- Re: TPI 5.7L and SVO injectors,
timsiford
- Re: TPI 5.7L and SVO injectors,
timsiford
- Re: TPI 5.7L and SVO injectors,
Bruce Plecan
- Re: TPI 5.7L and SVO injectors,
Dave Zug
- Hair Pulling .ECU file problem,
Peter Gargano
- Re: Hair Pulling .ECU file problem,
Mike
- Re: Hair Pulling .ECU file problem,
David Papworth
- Re: Hair Pulling .ECU file problem,
Peter Gargano
- Am I going the wrong direction ?,
NRG
- Re: Am I going the wrong direction ?,
Len Sabatine
- Re: Am I going the wrong direction ?,
NRG
- Re: Am I going the wrong direction ?,
Bruce Plecan
- Re: Am I going the wrong direction ?,
NRG
- Re: Am I going the wrong direction ?,
Len Sabatine
- Re: Am I going the wrong direction ?,
Bruce Plecan
- Re: Am I going the wrong direction ?,
Len Sabatine
- Re: Am I going the wrong direction ?,
NRG
- Re: Am I going the wrong direction ?,
Gerald Pelnar
- Re: Am I going the wrong direction ?,
NRG
- Re: Am I going the wrong direction ?,
Len Sabatine
- Re: Am I going the wrong direction ?,
Craig Moates
- Message not available
- Re: Am I going the wrong direction ?,
NRG
Re: TPI 5.7L and SVO injectors,
OneSS2NV
Re: TPI 5.7L and SVO injectors,
WEG1192
Re: TPI 5.7L and SVO injectors,
timsiford
Re: Need a bin. 3.1L V6 DIS manual transmission,
Jeremy Gonyou
$6D editors,
D. Barry Stubbs
700R4,
sapearso
- <Possible follow-ups>
- Re: 700R4,
Bob Valentine
Relocating IAT sensor?,
OneSS2NV
ecm and diacom help needed,
DBonnes
RE: Quick question,
Marteney, Steven J.
New Version of CarChat 2.2b,
Rob Berg
Re: Speed sensor question,
WEG1192
initial timing,
DBonnes
BLM ON 165,
Todd Burkard
Injector Pricing was RE: initial timing,
Marteney, Steven J.
EPROM carrier,
akallotte
A few newbie questions...,
Rex Weatherford
Gas mileage and headers,
Marteney, Steven J.
- Re: Gas mileage and headers,
Bruce Plecan
- <Possible follow-ups>
- Re: Gas mileage and headers,
Mike Frels
- RE: Gas mileage and headers,
Guenther, Max [ASCO/PA]
- RE: Gas mileage and headers,
Marteney, Steven J.
- RE: Gas mileage and headers,
John_Calabrese
- RE: Gas mileage and headers,
Len Sabatine
- RE: Gas mileage and headers,
Marteney, Steven J.
- Re: Gas mileage and headers,
Programmer
- RE: Gas mileage and headers,
Guenther, Max [ASCO/PA]
- RE: Gas mileage and headers,
John_Calabrese
- Re: Gas mileage and headers,
John_Calabrese
- RE: Gas mileage and headers,
Bob Valentine
- Confusion,
Dan Townsend
- Re: Confusion,
Ludis Langens
- Re: Confusion,
Dan Townsend
- Re: Confusion,
Bruce Plecan
- Re: Confusion,
Dan Townsend
- Re: Confusion,
Bruce Plecan
- Re: Confusion,
Walter Sherwin
- Stock Calpak question,
Craig Marcho
- Re: Stock Calpak question,
Bruce Plecan
- Re: Stock Calpak question,
Gabe
- Re: Stock Calpak question,
ae2598
- Re: Stock Calpak question,
Bruce Plecan
- Prom Question,
Dan Townsend
- Re: Prom Question,
Ludis Langens
- Re: Prom Question,
Dan Townsend
- Re: Prom Question,
Bruce Plecan
- Re: Stock Calpak question,
Ludis Langens
- Re: Stock Calpak question,
Greg Westphal
- RE: Gas mileage and headers,
Marteney, Steven J.
- RE: Gas mileage and headers,
Todd Burkard
88h & hi-way stuff,
rr
P&H interface,
Mike
Pontiac Supercharged 3.8L,
Daniel Collins
Re: Am I going the wrong direction ?,
rrauscher
Running a 88-89 W car PROM in a 90 T(Lumina) with 3.1 v6,
Lafferty, John
petrol tank venting ecu control,
Dave Evans
Re: Confusion,
Lou
EPROM question,
ECMnut
Re: GMECM Diges,
sapearso
MAP voltage to kpa,
Bob Valentine
Low power 5.0 TPI,
Programmer
- Re: Low power 5.0 TPI,
rr
- <Possible follow-ups>
- Re: Low power 5.0 TPI,
timsiford
- Re: Low power 5.0 TPI,
Chipsbyal
- RE: Low power 5.0 TPI,
Marteney, Steven J.
- Re: Low power 5.0 TPI,
Programmer
- Re: Low power 5.0 TPI,
Programmer
- Re: Low power 5.0 TPI,
OneSS2NV
- Re: Low power 5.0 TPI,
Programmer
- Re: Low power 5.0 TPI,
Programmer
- Re: Low power 5.0 TPI,
Programmer
Min idle,
Bruce Plecan
- <Possible follow-ups>
- Re: Min idle,
OneSS2NV
- Re: Min idle,
Bruce Plecan
- 165 ECU File,
NRG
- Re: 165 ECU File,
Bruce Plecan
- Re: 165 ECU File,
NRG
- Re: 165 ECU File,
Len Sabatine
- Re: 165 ECU File,
NRG
- Re: 165 ECU File,
Bruce Plecan
- Re: 165 ECU File,
NRG
- Re: 165 ECU File,
Len Sabatine
- Re: 165 ECU File,
Craig Moates
- Re: Min idle,
rr
- Re: Min idle,
Roger Heflin
Need small IAC,
Eric Norgard
Gas mileage saga continues (Sorry, QUITE LONG),
Marteney, Steven J.
- <Possible follow-ups>
- Re: Gas mileage saga continues (Sorry, QUITE LONG),
Tedscj
- RE: Gas mileage saga continues (Sorry, QUITE LONG),
Marteney, Steven J.
- RE: Gas mileage saga continues (Sorry, QUITE LONG),
Marteney, Steven J.
- RE: Gas mileage saga continues (Sorry, QUITE LONG),
Marteney, Steven J.
Fw: Explorer problems,
Bruce Plecan
Fw: [ma] Sad note,
Dave Zug
List of Lists,
Dave Zug
Re: 165 ECU File,
Programmer
- Re: 165 ECU File,
Dan Townsend
- Re: 165 ECU File,
NRG
- <Possible follow-ups>
- RE: 165 ECU File,
Tim Welden
- Re: 165 ECU File,
Programmer
- Re: 165 ECU File,
Programmer
- Re: 165 ECU File,
timsiford
- Re: 165 ECU File,
timsiford
- Re: 165 ECU File,
timsiford
- Re: 165 ECU File,
Programmer
- Re: 165 ECU File,
Programmer
Re: Auto vs. man for TA MAF setup,
WEG1192
Gen Info,
Bruce Plecan
Fw: TeamZR1 ECM - Class V - Lets cook TM's L89 code,
Romans, Mark
Oops...was Re: List of Lists,
OneSS2NV
749 O/L idle help needed.....,
Barry Tisdale
30 lb FMS Injector ??'s,
Andrew K. Mattei
Re:head gasket,
KasaRyan
DFCO Questions.,
Ross Myers
High Idle Question,
Todd Burkard
Re: Buick GN ECM on Ebay,
WEG1192
Re: Holley 502-1 tbi system,
John_Calabrese
Re: 749 O/L idle help needed,
Dig
Re: 730 ECM Swap,
WEG1192
- Re: 730 ECM Swap,
Dave Zug
- <Possible follow-ups>
- Re: 730 ECM Swap,
Todd Burkard
- Re: 730 ECM Swap,
WEG1192
- RE: 730 ECM Swap,
Marteney, Steven J.
- RE: 730 ECM Swap,
Marteney, Steven J.
- Re: 730 ECM Swap,
WEG1192
- Re: 730 ECM Swap,
Robert Ward
- Re: 730 ECM Swap,
WEG1192
- Re: 730 ECM Swap,
WEG1192
- Re: 730 ECM Swap,
WEG1192
- Re: 730 ECM Swap,
WEG1192
- RE: 730 ECM Swap,
Marteney, Steven J.
- Re: 730 ECM Swap,
timsiford
- Re: 730 ECM Swap,
WEG1192
- Re: 730 ECM Swap,
WEG1192
- Re: 730 ECM Swap,
WEG1192
- Re: 730 ECM Swap,
WEG1192
- Re: 730 ECM Swap,
WEG1192
- RE: 730 ECM Swap,
Marteney, Steven J.
- RE: 730 ECM Swap,
Todd Burkard
- Re: 730 ECM Swap,
Zacek DenniS
- Re: 730 ECM Swap,
Tedscj
- Re: 730 ECM Swap,
Bob Valentine
- Re: 730 ECM Swap,
Programmer
- Re: 730 ECM Swap,
ECMnut
MemCals Needing a Good Home...,
Mike Frels
- <Possible follow-ups>
- Re: MemCals Needing a Good Home...,
WEG1192
- Re: MemCals Needing a Good Home...,
steve ravet
- Re: MemCals Needing a Good Home...,
Walter Sherwin
- Re: MemCals Needing a Good Home...,
ae2598
- Re: MemCals Needing a Good Home...,
Peter Gargano
- Re: MemCals Needing a Good Home...,
Walter Sherwin
- Re: MemCals Needing a Good Home...,
Bruce Plecan
- Re: MemCals Needing a Good Home...,
Ludis Langens
- Re: MemCals Needing RFD Tweeking Before Finding A Home......,
Walter Sherwin
- Re: MemCals Needing RFD Tweeking Before Finding A Home......,
Bruce Plecan
- Re: MemCals Needing RFD Tweeking Before Finding A Home......,
Ludis Langens
- Re: MemCals Needing RFD Tweeking Before Finding A Home......,
ae2598
- Re: MemCals Needing RFD Tweeking Before Finding A Home......,
Walter Sherwin
- Re: MemCals Needing RFD Tweeking Before Finding A Home......,
Walter Sherwin
- Re: MemCals Needing RFD Tweeking Before Finding A Home......,
Ludis Langens
- RE: MemCals Needing a Good Home...,
David Papworth
Gas mileage saga UPDATE (long again, sorry),
Marteney, Steven J.
RealTime on-the-fly modifications of code,
timsiford
'747 + 6 Cyl + Turbo?,
Shane Forster
Halloween HEX Patches,
Walter Sherwin
'749 Promgrammer updates,
Dig
Any Advice on Shorty Plugs?,
OneSS2NV
Call for standards: EPROM/cal editing software,
Dig
- Re: Call for standards: EPROM/cal editing software,
Peter Gargano
- Re: Call for standards: EPROM/cal editing software,
Ludis Langens
- Re: Call for standards: EPROM/cal editing software,
steve ravet
- <Possible follow-ups>
- Re: Call for standards: EPROM/cal editing software,
ECMnut
- Re: Call for standards: EPROM/cal editing software,
Squash
- Re: Call for standards: EPROM/cal editing software,
timsiford
- Re: Call for standards: EPROM/cal editing software,
Programmer
- Re: Call for standards: EPROM/cal editing software,
Ross Myers
- Re: Call for standards: EPROM/cal editing software,
Daniel Collins
- Re: Call for standards: EPROM/cal editing software,
timsiford
- RE: Call for standards: EPROM/cal editing software,
Eric Aos
- Re: Call for standards: EPROM/cal editing software,
timsiford
- Re: Call for standards: EPROM/cal editing software,
Paul Blackmore
- Re: Call for standards: EPROM/cal editing software,
Paul Blackmore
Missing guy,
Programmer
RE: WinBin vs PromEdit - problem with "mulOrDivOrBit",
Eric Aos
Driver board group buy closed.,
DRhoads2
Adding another O2 sensor,
timsiford
When is a heated 02 sensor necessary ?,
Edmond
- Re: When is a heated 02 sensor necessary ?,
David Cooley
- Re: When is a heated 02 sensor necessary ?,
ae2598
- <Possible follow-ups>
- Re: When is a heated 02 sensor necessary ?,
timsiford
- Re: When is a heated 02 sensor necessary ?,
timsiford
- Re: When is a heated 02 sensor necessary ?,
Squash
- Re: When is a heated 02 sensor necessary ?,
Bob Valentine
- Re: When is a heated 02 sensor necessary ?,
Squash
- RE: When is a heated 02 sensor necessary ?,
Marteney, Steven J.
- RE: When is a heated 02 sensor necessary ?,
Marteney, Steven J.
EGOR future...was(Autronic Questions),
Garfield Willis
Another WinBin question,
Carl Ijames
Tuning 101,
Bruce Plecan
Re: REALLY basic newbie ?'s,
Bruce Plecan
HUD?,
Mike
The Original DIY EGOR,
Bruce Plecan
Miniram Tip in Problem,
JN
[no subject],
Mike Martone
Backfire,
Todd Burkard
Re: vette instrument cluster,
Mike Turner/ENGR/HQ/KEMET/US
: Re: LS1 - Flash - Reprogramming,
Speartech
Big Injectors in Little Engine?,
Craig Moates
Re: LS1 - Flash - Reprogramming,
DBonnes
Re: 88-89 Turbo PFI 1.5L Isuzu,
ECMnut
Australian 1227808 ECU data for .ecu file,
Roger Merritt
Re: Call for standards: EPROM/cal editing,
Dig
- <Possible follow-ups>
- Re: Call for standards: EPROM/cal editing,
Dig
- Re: Call for standards: EPROM/cal editing,
Programmer
- Re: Call for standards: EPROM/cal editing,
ECMnut
- Re: Call for standards: EPROM/cal editing,
Ross Myers
- Re: Call for standards: EPROM/cal editing,
WEG1192
- Re: Call for standards: EPROM/cal editing,
Bruce Plecan
- Re: Call for standards: EPROM/cal editing,
TK
- Re: Call for standards: EPROM/cal editing,
Garfield Willis
- New Prom,
Dan Townsend
- Re: New Prom,
Ludis Langens
- non-programmer ??'s,
Chris P.
- Re: non-programmer ??'s,
steve ravet
- Re: non-programmer ??'s,
Chris P.
- Re: New Prom,
Kevin Crain
- Re: New Prom,
Len Sabatine
- Re: New Prom,
Dan Townsend
- 89 '165 Ecu for Winbin - Come and get it,
Dan Townsend
- Re: New Prom,
Len Sabatine
- Re: New Prom,
David Cooley
- News Release - Maybe this will make life a little easier,
Bob
- Re: News Release - Maybe this will make life a little easier,
Bruce Plecan
- Re: News Release - Maybe this will make life a little easier,
Len Sabatine
- Re: Call for standards: EPROM/cal editing,
Dave Zug
- Re: Call for standards: EPROM/cal editing,
JN
- Re: Call for standards: EPROM/cal editing,
WEG1192
- Re: Call for standards: EPROM/cal editing,
ECMnut
- Re: Call for standards: EPROM/cal editing,
Daniel Collins
- RE: Call for standards: EPROM/cal editing,
Eric Aos
- Re: Call for standards: EPROM/cal editing,
ECMnut
- Re: Call for standards: EPROM/cal editing,
ECMnut
- Re: Call for standards: EPROM/cal editing,
WEG1192
- Re: Call for standards: EPROM/cal editing,
Dig
- Re: Call for standards: EPROM/cal editing,
Dig
- Re: Call for standards: EPROM/cal editing,
Programmer
- Re: Call for standards: EPROM/cal editing,
Programmer
- Re: Call for standards: EPROM/cal editing,
Programmer
- Re: Call for standards: EPROM/cal editing,
Programmer
- Re: Call for standards: EPROM/cal editing,
sapearso
- Re: Call for standards: EPROM/cal editing,
Programmer
- Re: Call for standards: EPROM/cal editing,
Programmer
- Re: Call for standards: EPROM/cal editing,
Programmer
Re: GMECM Digest V2 #589,
Dig
Elementary assembly lang question...,
Dale Klein
MEFI 3.0,
Mike Turner/ENGR/HQ/KEMET/US
Combo driver group buy "NAG list",
DRhoads2
shipping addresses for driver board group buy,
David Rhoads II
Part number for heated o2,
Todd Burkard
Engine Analyser,
Bruce Plecan
mask 88h hac'd,
rr
Re: History & $5D Calibration Information?,
Daniel Collins
Edge board scanners,
Bruce Plecan
90 TPI computer and wiring setup question???,
A70Duster
FYI: Fw: Modifying TDF files?,
Craig Moates
Question about BLMs,
Edmond
TBI idle problem,
Brent
Fuel rail vaporization,
Daniel Collins
Message formatting,
Carl Ijames
Re: 89 '165 Ecu for Winbin - Come and get it,
Dan Townsend
Re: DIY_EFI Digest V5 #369,
David Rhoads II
Driver board shipping addresses,
David Rhoads II
AFR calc from Diacom data... was RE: Adding another O2 sensor,
Marteney, Steven J.
O2 sensors,
Bruce Plecan
Re: New Prom,
Programmer
what is an "emulator"?,
DBonnes
[no subject],
Warren Bowley
DIY EGOR,
Bruce Plecan
New for Old TBI intake swap,
Bob Valentine
RE: E vs M ALDL pins,
Marteney, Steven J.
10 LED O2 monitor,
Mathieu Blais
- Re: 10 LED O2 monitor,
Bruce Plecan
- Re: 10 LED O2 monitor,
steve ravet
- Re: 10 LED O2 monitor,
Romans, Mark
- Re: 10 LED O2 monitor,
Bruce Plecan
- Re: 10 LED O2 monitor,
Romans, Mark
- Re: 10 LED O2 monitor,
steve ravet
- Re: 10 LED O2 monitor,
Bruce Plecan
- Re: 10 LED O2 monitor,
Mathieu Blais
- Re: 10 LED O2 monitor,
Mike Martone
- Re: 10 LED O2 monitor,
Bruce Plecan
- Re: 10 LED O2 monitor,
ae2598
- Re: 10 LED O2 monitor,
Bruce Plecan
- Re: 10 LED O2 monitor,
Aron Lopes Petrucci
- Re: 10 LED O2 monitor,
Bruce Plecan
- Re: 10 LED O2 monitor,
Mike Martone
- Re: 10 LED O2 monitor,
Peter Gargano
- Re: 10 LED O2 monitor,
Ludis Langens
- RE: 10 LED O2 monitor,
David Cooley
- <Possible follow-ups>
- RE: 10 LED O2 monitor,
don . broadus
- RE: 10 LED O2 monitor,
Eric Bryant
- RE: 10 LED O2 monitor,
don . broadus
2 & 3 Bar Map Stuff,
Walter Sherwin
argh.,
Warren Bowley
ENTIRECATALOG.pdf,
John Martin
[no subject],
Darryl & Karen Smith
Watch for new round of virii!!!,
Shannen Durphey
89 MANUAL BIN,
Todd Burkard
Bad oxygen sensor ?,
Edmond
- Re: Bad oxygen sensor ?,
David Cooley
- Re: Bad oxygen sensor ?,
Romans, Mark
- Re: Bad oxygen sensor ?,
Walter Sherwin
- <Possible follow-ups>
- Re: Bad oxygen sensor ?,
timsiford
- Re: Bad oxygen sensor ?,
Edmond
- Re: Bad oxygen sensor ?,
David Cooley
- Re: Bad oxygen sensor ?,
Romans, Mark
- Re: Bad oxygen sensor ?,
Bruce Plecan
- Re: Bad oxygen sensor ?,
Edmond
- Re: Bad oxygen sensor ?,
Bruce Plecan
- Re: Bad oxygen sensor ?,
Edmond
- Re: Bad oxygen sensor ?,
Bruce Plecan
- Re: Bad oxygen sensor ?,
Len Sabatine
- Re: Bad oxygen sensor ?,
Edmond
- Re: Bad oxygen sensor ?,
Bruce Plecan
- Re: Bad oxygen sensor ?,
timsiford
- Re: Bad oxygen sensor ?,
Programmer
WinBin Version Next...,
Eric Aos
1227148 ecu ??,
Programmer
Re: 1227148 ecu uploaded,
Programmer
Measuring Altitude,
Ross Myers
J N's MiniRam backfire,
timsiford
- Re: J N's MiniRam backfire,
Bruce Plecan
- Re: J N's MiniRam backfire,
JN
- Re: J N's MiniRam backfire,
Walter Sherwin
- <Possible follow-ups>
- Re: J N's MiniRam backfire,
timsiford
- Re: J N's MiniRam backfire,
rrauscher
- Re: J N's MiniRam backfire,
timsiford
- Re: J N's MiniRam backfire,
timsiford
- Re: J N's MiniRam backfire,
timsiford
- Re: J N's MiniRam backfire,
Bob Valentine
- Re: J N's MiniRam backfire,
Programmer
- Re: J N's MiniRam backfire,
timsiford
- Re: J N's MiniRam backfire,
timsiford
Viruses,
Bruce Plecan
- Re: Viruses,
Swayze
- Re: Viruses,
Rex Weatherford
- RE: Viruses,
David Cooley
- RE: Viruses,
Eric Aos
- Re: Viruses,
Edmond
- Re: Viruses,
Dave Zug
- Re: Viruses,
Kevin R
- Re: Viruses,
Len Sabatine
- <Possible follow-ups>
- Re: Viruses,
Squash
- Re: Viruses,
timsiford
- Re: Viruses,
Bob Valentine
- Re: Viruses,
Chipsbyal
- Re: Viruses,
Squash
- RE: Viruses,
Bill Shaw
- Re: Viruses,
Programmer
- Re: Viruses,
Programmer
- Re: Viruses,
Bob Valentine
XFire Bin,
Bruce Plecan
check sum calculator,
Kevin R
XFire Bin CSH, HQ Special,
Bruce Plecan
JN's Minram Backfire UPDATE!,
JN
head gaskets,
KasaRyan
Timing jump at idle,
Bob Valentine
Aftermarket ROMs,
Ross Myers
Fw: Scope pics...,
Bruce Plecan
scope,
Bruce Plecan
Quick - ECM app help,
akallotte
Looking for a website,
ECMnut
general info,
Mathieu Blais
Question about WOT table in $8D bin,
NRG
- Re: Question about WOT table in $8D bin,
Edmond
- <Possible follow-ups>
- Re: Question about WOT table in $8D bin,
Squash
- Re: Question about WOT table in $8D bin,
Programmer
- Re: Question about WOT table in $8D bin,
timsiford
- Re: Question about WOT table in $8D bin,
timsiford
- Re: Question about WOT table in $8D bin,
rrauscher
- Re: Question about WOT table in $8D bin,
timsiford
- Re: Question about WOT table in $8D bin,
timsiford
- Re: Question about WOT table in $8D bin,
timsiford
- Re: Question about WOT table in $8D bin,
timsiford
- Re: Question about WOT table in $8D bin,
NRGZ28
- Re: Question about WOT table in $8D bin,
Romans, Mark
- Re: Question about WOT table in $8D bin,
NRGZ28
- Re: Question about WOT table in $8D bin,
Romans, Mark
- Re: Question about WOT table in $8D bin,
Bruce Plecan
- Re: Question about WOT table in $8D bin,
Romans, Mark
- Re: Question about WOT table in $8D bin,
Bruce Plecan
- Re: Question about WOT table in $8D bin,
Romans, Mark
- Re: Question about WOT table in $8D bin,
Bruce Plecan
- Re: Question about WOT table in $8D bin,
Len Sabatine
- Re: Question about WOT table in $8D bin,
NRGZ28
- Re: Question about WOT table in $8D bin,
Bruce Plecan
- Re: Question about WOT table in $8D bin,
NRGZ28
- Re: Question about WOT table in $8D bin,
Len Sabatine
- Re: Question about WOT table in $8D bin,
Bruce Plecan
- Re: Question about WOT table in $8D bin,
Bruce Plecan
- Re: Question about WOT table in $8D bin,
timsiford
Re: off-list Re: general info,
Mathieu Blais
Just got my TPI running...questions...,
Tedscj
Re: 165 knock sensor sensitivity,
Programmer
heads are back on - made some runs and tuning,
KasaRyan
Driver board shipping costs update,
DRhoads2
Miniram Backfire Update II,
JN
looking for afdz and/or albk bins,
Pat Ford
DIS Ditty,
Bruce Plecan
Proms bigger than 64K,
Richard Wakeling
Hypertech carrier,
akallotte
Calpack - Where to buy cheap?,
marcho
DIY EGOR plans,
NickG
Re: 165 to 730 Harness - Final Info,
Dan Townsend
base / advance timing - TBI/TPI with distributor,
Marc Piccioni
Re: 165 to 730 Harness - terminal info,
Speartech
89 $6E Code Question,
JN
Re: Analog meters,
A70Duster
I'm ready for Combo Driver payments,
David Rhoads II
Re: I'm ready for Combo Driver payments - webpage,
David Rhoads II
Crane AFPR,
NRGZ28
More DIY EGOR,
Bruce Plecan
Diesel EFI,
sapearso
Re: Question about...,
timsiford
Western union location for Driver brd International pymts,
David Rhoads II
PROM Size on a 165,
Mitch Louole
- Re: PROM Size on a 165,
Bruce Plecan
- Re: PROM Size on a 165,
ae2598
- Re: PROM Size on a 165,
Craig Marcho
- Re: PROM Size on a 165,
Romans, Mark
- Re: PROM Size on a 165,
Gabe
- Re: PROM Size on a 165,
Bruce Plecan
- Re: PROM Size on a 165,
Gabe
- Re: PROM Size on a 165,
Michael Davis
- Re: PROM Size on a 165,
Gabe
- Re: PROM Size on a 165,
Romans, Mark
- Re: PROM Size on a 165,
Craig Marcho
- Re: PROM Size on a 165,
Peter Gargano
- Re: PROM Size on a 165,
Ludis Langens
- <Possible follow-ups>
- Re: PROM Size on a 165,
Brent
- Re: PROM Size on a 165,
Mitch Louole
beginner question,
Mathieu Blais
Re: GMECM Digest V2 #636,
sapearso
ABS ALDL comms,
Dale Klein
Re: GMECM Digest V2 #637,
sapearso
Re: Injector help...,
NickG
More WOT AFR stuff,
timsiford
Laptops,
Jay Carter
Re; ABS ALDL comms,
Rich Vandervoort
Schematic for 1227730 ECM,
donburns
Spark plug data,
KasaRyan
MEFI installation pictures,
Shannen Durphey
Meter testing for ecm work,
Bruce Plecan
Open A/D lines onna '148?,
Dig
Parts available from chevy 3.1L MPFI motor ('727 ECM),
ae2598
Is this the right place?,
Jake Kooser
Re: GMECM Digest V2 #644,
Don Burns
Too many BCCs, too few mask ids,
Ludis Langens
1227808 - Which cars?,
Roger Merritt
Contribution to GMECM (AFR Modifier.exe),
timsiford
- Re: Contribution to GMECM (AFR Modifier.exe),
NRG
- RE: Contribution to GMECM (AFR Modifier.exe),
Bob
- Re: Contribution to GMECM (AFR Modifier.exe),
Dave Zug.
- <Possible follow-ups>
- RE: Contribution to GMECM (AFR Modifier.exe),
timsiford
- Re: Contribution to GMECM (AFR Modifier.exe),
Chipsbyal
- Re: Contribution to GMECM (AFR Modifier.exe),
timsiford
- Re: Contribution to GMECM (AFR Modifier.exe),
timsiford
- Re: Contribution to GMECM (AFR Modifier.exe),
timsiford
- Re: Contribution to GMECM (AFR Modifier.exe),
timsiford
- RE: Contribution to GMECM (AFR Modifier.exe),
timsiford
- Re: Contribution to GMECM (AFR Modifier.exe),
timsiford
- Re: Contribution to GMECM (AFR Modifier.exe),
timsiford
- Re: Contribution to GMECM (AFR Modifier.exe),
timsiford
- Re: Contribution to GMECM (AFR Modifier.exe),
timsiford
Quick sidenote about AFR Modifier.exe,
timsiford
Pump Shot table Question $6E,
JN
DIY EGOR sensor app,
NickG
Re: tbi motor into 400 suburban,
KasaRyan
RE: Some basic questions,
jkooser
89 165 TPI hack?,
Marteney, Steven J.
IAC base count question.,
Kevin R
7747 timing question.,
Kevin R
7747 idle smoothing.,
Kevin R
88 Police 350 specs,
Eric Deslauriers
Any message packrats out there?,
Shannen Durphey
Help 730,
DALE GROAH
help! prbs bldg ALDL interface,
Eric Deslauriers
Shannen, newest digests coming first...,
ECMnut
Re: 730 ECM Swap (group buy),
WEG1192
OBDI and OBDII Scanners?,
Rex Weatherford
Some questions on DIY EGOR schematics,
Marteney, Steven J.
Message Packrats,
Shannen Durphey
AFR Modifier ... bugs reported,
timsiford
Thanksgiving,
Bruce Plecan
BIN Tool Chest,
timsiford
LT1 ECU,
Dave Plummer
Re: Help for Newbies on Spark Timing,
WEG1192
Fwd: ECM for sale...,
D. Barry Stubbs
New bin on incoming,
Ross Myers
c't flasher,
Mike
Fw: Knock Sensor,
Bruce Plecan
eprom for 747,
Mathieu Blais
$32 - '165 ecu file ?,
Programmer
Re:$32 - '165 ecu file ?(LT1/LS1 twist),
Speartech
grams/cfm ?,
Programmer
BinEditor Standard Configs?,
Dig
1994 Truck ECM ??,
Squash
- Re: 1994 Truck ECM ??,
Ludis Langens
- <Possible follow-ups>
- Re: 1994 Truck ECM ??,
Chipsbyal
- Re: 1994 Truck ECM ??,
Programmer
- Re: 1994 Truck ECM ??,
Chipsbyal
- Re: 1994 Truck ECM ??,
Programmer
- Ecm role expanding?,
Dave Zug.
- Re: Ecm role expanding?,
Bruce Plecan
- Re: Ecm role expanding?,
JN
- Re: Ecm role expanding?,
Len Sabatine
- Re: Ecm role expanding?,
Bruce Plecan
- Re: Ecm role expanding?,
Len Sabatine
- Re: Ecm role expanding?,
Shannen Durphey
- RE: Ecm role expanding?,
Jake Kooser
- Re: Ecm role expanding?,
Kevin R
- Re: Ecm role expanding?,
Rex Weatherford
- Re: Ecm role expanding?,
Bruce Plecan
- Re: Ecm role expanding?,
ae2598
- Re: 1994 Truck ECM ??,
Chipsbyal
- Re: 1994 Truck ECM ??,
Speartech
Auto Power Environment,
Mike Turner/ENGR/HQ/KEMET/US
- Re: Auto Power Environment,
ae2598
- <Possible follow-ups>
- RE: Auto Power Environment,
Eric Bryant
- RE: Auto Power Environment,
Tim Welden
- RE: Auto Power Environment,
Eric Bryant
- RE: Auto Power Environment,
Marteney, Steven J.
- Re: Auto Power Environment,
John_Calabrese
- RE: Auto Power Environment,
don . broadus
- RE: Auto Power Environment,
Tim Welden
- RE: Auto Power Environment,
Marc Piccioni
Re: Ecm role expanding?,
JTesta1966
- <Possible follow-ups>
- RE: Ecm role expanding?,
Marteney, Steven J.
- RE: Ecm role expanding?,
Rich Vandervoort
- Re: Ecm role expanding?,
Jeremy Gonyou
- Re: Ecm role expanding?,
Jeremy Gonyou
- RE: Ecm role expanding?,
Eric Bryant
- RE: Ecm role expanding?,
Eric Bryant
- Re: Ecm role expanding?,
Squash
- Re: Ecm role expanding?,
Bob Valentine
- Re: Ecm role expanding?,
sapearso
- Re: Ecm role expanding?,
Jeremy Gonyou
- RE: Ecm role expanding?,
Eric Bryant
- RE: Ecm role expanding?,
Eric Bryant
- RE: Ecm role expanding?,
Marteney, Steven J.
- RE: Ecm role expanding?,
jkooser
- RE: Ecm role expanding?,
Eric Bryant
- RE: Ecm role expanding?,
Marteney, Steven J.
- Re: Ecm role expanding?,
Rich Vandervoort
- Re: Ecm role expanding?,
sapearso
Injector question,
Todd Burkard
Re: Bruce's Car of the Month...,
OneSS2NV
drive by wire and 42V,
KasaRyan
7747 related questions,
Ross Myers
Re: Distributorless ignition (I'm new around here),
Daniel Collins
- Re: Distributorless ignition (I'm new around here),
steve ravet
- Re: Distributorless ignition (I'm new around here),
Bruce Plecan
- <Possible follow-ups>
- Re: Distributorless ignition (I'm new around here),
Drew Skinner
- RE: Distributorless ignition (I'm new around here),
Eric Bryant
- Re: Distributorless ignition (I'm new around here),
Drew Skinner
- RE: Distributorless ignition (I'm new around here),
Guenther, Max [ASCO/PA]
- Re: Distributorless ignition (I'm new around here),
Speartech
- Re: Distributorless ignition (I'm new around here),
Len Sabatine
- Re: Distributorless ignition (I'm new around here),
RDwoo10
Compilers (human) needed,
Ludis Langens
PWMs... What are they?,
Richard Wakeling
All set with digests,
Shannen Durphey
Injector Size on Chevy 3.1 V6,
Jeremy Gonyou
Winbin problems,
Mathieu Blais
RE: Transez. was:New bin...,
Marteney, Steven J.
Quick update of AFRModifier,
timsiford
Fuel Injector list?,
Rex Weatherford
Anyone working with this one?,
Rex Weatherford
PWMs, 3FXXs and personal opinions.,
Richard Wakeling
- Re: PWMs, 3FXXs and personal opinions.,
Len Sabatine
- Re: PWMs, 3FXXs and personal opinions..,
Kevin R
- <Possible follow-ups>
- Re: PWMs, 3FXXs and personal opinions.,
rrauscher
- RE: PWMs, 3FXXs and personal opinions.,
Marteney, Steven J.
- Re: PWMs, 3FXXs and personal opinions.,
Ross Myers
- RE: PWMs, 3FXXs and personal opinions.,
Len Sabatine
- RE: PWMs, 3FXXs and personal opinions.,
Marteney, Steven J.
Re: Ecm role expanding?Re: GMECM Digest V2 #667,
Swayze
AYSZ bin,
Jeremy Gonyou
Reading Plugs,
timsiford
Re: The Honda O2 sensor. Wide band module.,
Bruce Plecan
CheckSum calculation ... ATTN Dave Zug,
timsiford
Need a 7165 ECM,
JN
- Re: Need a 7165 ECM,
ae2598
- Re: Need a 7165 ECM,
Dan Townsend
- Re: Need a 7165 ECM,
JN
- Re: Need a 7165 ECM,
steve ravet
- Re: Need a 7165 ECM,
Bruce Plecan
- Re: Need a 7165 ECM,
Dan Townsend
- Re: Need a 7165 ECM,
Romans, Mark
- Re: Need a 7165 ECM,
Bruce Plecan
- Re: Need a 7165 ECM,
Romans, Mark
- Re: Need a 7165 ECM,
Bruce Plecan
- Re: Need a 7165 ECM,
ae2598
- Re: Need a 7165 ECM,
Craig Marcho
- Re: Need a 7165 ECM,
Bruce Plecan
- Re: Need a 7165 ECM,
Programmer
- Re: Need a 7165 ECM,
Ludis Langens
- <Possible follow-ups>
- Re: Need a 7165 ECM,
WEG1192
[ADMIN] Expectations of privacy,
Orin
Policy letter, at CSH, HQ,
Bruce Plecan
Emulator gone bonkers,
Keith
jumps to memory - LT1 8051 T side,
Dale Klein
WB O2 Calibrations,
Bruce Plecan
off-list Re: Anyone working with this one?,
Bob Valentine
Boost,
Bob Wooten
contribution: APFN, GM8746,
Mark G.
Recent archives?,
Daniel Houlton
Part 2: Reading Plugs, pistons, and valves (with Pics),
timsiford
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Bruce Plecan
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Programmer
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Shannen Durphey
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Dave Zug
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Bruce Plecan
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Dave Zug
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Bruce Plecan
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Len Sabatine
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Bruce Plecan
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
David Papworth
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Len Sabatine
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Len Sabatine
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Dave Zug
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Bruce Plecan
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Barry Tisdale
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Walter Sherwin
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Dave Zug
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
rr
- <Possible follow-ups>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Daniel Collins
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
timsiford
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
timsiford
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
Bob Wooten
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics),
timsiford
- RE: Part 2: Reading Plugs, pistons, and valves (with Pics),
Marteney, Steven J.
- RE: Part 2: Reading Plugs, pistons, and valves (with Pics),
Mike Turner/ENGR/HQ/KEMET/US
Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons, and valves (with Pics)),
Dig
- Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons, and valves (with Pics)),
Bruce Plecan
- <Possible follow-ups>
- RE: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons, and valves (with Pics)),
Bob Wooten
- Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons, and valves (with Pics)),
Bob Wooten
- Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons, and valves (with Pics)),
Bob Wooten
Re: bithoist -- Help for the compiler challenged,
Programmer
DIS for GMECM,
Squash
- Re: DIS for GMECM,
mta228
- <Possible follow-ups>
- Re: DIS for GMECM,
Chipsbyal
- Re: DIS for GMECM,
Squash
- Re: DIS for GMECM,
Bob Valentine
- Re: DIS for GMECM,
Speartech
- Re: DIS for GMECM,
Squash
- Re: DIS for GMECM,
Speartech
- Re: DIS for GMECM,
sapearso
- Re: DIS for GMECM,
Programmer
- Re: DIS for GMECM,
Bob Wooten
- Re: DIS for GMECM,
Len Sabatine
- Re: DIS for GMECM,
Squash
- Re: DIS for GMECM,
Jeremy Gonyou
- Re: DIS for GMECM,
Jeremy Gonyou
- Re: DIS for GMECM,
Speartech
- Re: DIS for GMECM,
Speartech
- Re: DIS for GMECM,
Ross Myers
- Re: DIS for GMECM,
OneSS2NV
- Re: DIS for GMECM,
Chipsbyal
Injector part #5235047,
Tedscj
Open/closed loop,
Bob Wooten
Big thanks to all,
timsiford
CPU's,
Bob Wooten
Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons,,
Dave Williams
LS1 Lean Cruise,
Ross Myers
- Re: LS1 Lean Cruise,
Dale Klein
- <Possible follow-ups>
- Re: LS1 Lean Cruise,
Daniel Collins
- Re: LS1 Lean Cruise,
Ross Myers
- Re: LS1 Lean Cruise,
rrauscher
- Re: LS1 Lean Cruise,
Stephen . Kaminska
- RE: LS1 Lean Cruise,
Mika . Helander
- RE: LS1 Lean Cruise,
rrauscher
- Re: LS1 Lean Cruise,
rrauscher
- Re: LS1 Lean Cruise,
rrauscher
- Re: LS1 Lean Cruise,
rrauscher
- Re: LS1 Lean Cruise,
Bob Wooten
Superchips question,
Craig Marcho
New Bins on Incoming....,
Craig Marcho
looking for a 93 4.3 bin - 9734 BBNT,
ECMnut
what chip is this?,
Craig Marcho
7747 spark control questions,
WEG1192
Decel Enleanment and 7749,
Jeffrey Scott
Suzuki cycle ECUs?,
Eric Bryant
Jargon, Terminology, Terms ....,
timsiford
- Re: Jargon, Terminology, Terms ....,
Shannen Durphey
- Re: Jargon, Terminology, Terms ....,
Bruce Plecan
- <Possible follow-ups>
- Re: Jargon, Terminology, Terms ....,
timsiford
- RE: Jargon, Terminology, Terms ....,
Marteney, Steven J.
- RE: Jargon, Terminology, Terms ....,
Marteney, Steven J.
A new MAF location for the Turbo GNs,
Bruce Plecan
Christmas Wishlist (BCCs),
Jeremy Gonyou
Re: TPI Runner Question,
WEG1192
- Re: TPI Runner Question,
David Papworth
- <Possible follow-ups>
- Re: TPI Runner Question,
A70Duster
- Re: TPI Runner Question,
WEG1192
- Re: TPI Runner Question,
Wayne Johnson
- Re: TPI Runner Question,
timsiford
- Re: TPI Runner Question,
timsiford
- Re: TPI Runner Question,
WEG1192
- Re: TPI Runner Question,
timsiford
- Re: TPI Runner Question,
timsiford
- Re: TPI Runner Question,
Wayne Johnson
- Re: TPI Runner Question,
timsiford
- Re: TPI Runner Question,
Todd Burkard
- Re: TPI Runner Question,
WEG1192
Re: 7747 spark tuning for newbies,
WEG1192
Re: tpi for an early jaguar,
WEG1192
GM8746 program...,
Mark G.
Code 36: Burnoff Diagnostic Fault,
Marteney, Steven J.
my very small contribution to the list.....,
Craig Marcho
Fw: my very small contribution to the list.....correction,
Craig Marcho
ION,
rr
more papers,
rr
Re: GMECM Digest V2 #685,
Bill Shaw
6.5L Diseasal PCM query.,
Ross Myers
TPI for Chevy truck,
sapearso
165 schematics and O2 circuit,
Marteney, Steven J.
ATND bin,
Darryl & Karen Smith
DIY-EGOR schematics,
Marteney, Steven J.
BANF,
Walter Sherwin
Fw: Min. air / minTPS / Holes in Butterflies.,
Bruce Plecan
Hiway for the '747,
rr
b & d body odb1 & 2,
Dale Klein
Injector Sizes All the Same?,
WEG1192
need help Programming '165 Memcal,
Craig Marcho
new papers on gmecm,
steve ravet
Re: converting a GM non computer hei distributor to a computer hei,
Bob Valentine
TC lock/unlock?,
KasaRyan
Re: converting a GM non computer hei distributor to a computer hei,
WEG1192
LT1 DIS or CoilNearPlug Almost here,
Bruce Plecan
what programming voltage?,
Craig Marcho
Misc Info,
Bob Wooten
Re: converting a GM non computer hei distributor to a computer hei,
Bob Valentine
Re: strange check engine light,
WEG1192
Sorry for this simple connector question,
Marteney, Steven J.
Quad4 ANMS and AXRM tables,
Rex Weatherford
Detonation 101,
Bruce Plecan
- Re: Detonation 101,
Bruce Plecan
- Re: Detonation 101,
Matt S Bower
- Re: Detonation 101,
den Broeder, Ernst
- Re: Detonation 101,
Len Sabatine
- <Possible follow-ups>
- Re: Detonation 101,
Todd Burkard
- Re: Detonation 101,
JTesta1966
- Re: Detonation 101,
JTesta1966
- RE: Detonation 101,
Tim Welden
- Re: Detonation 101,
A70Duster
- Re: Detonation 101,
sapearso
This just in,
Bruce Plecan
Mapping a v6 MAF...,
Shannen Durphey
Re: 4L60E - was new bin,
KasaRyan
'730 in a '73,
A70Duster
Ramjet,
Darryl & Karen Smith
Programmer questions... which brand?,
Craig Marcho
747 VSS Question,
Bob Valentine
Was Ramjet now L31,
Marc Piccioni
MEFI,
John Martin
Request for Diagnostic help (sorta NC),
Brent
Re: Request for Diagnostic help (sorta NC),
Daniel E. Griffin
vortec heads,
KasaRyan
Olds 350 donor,
Bill Shaw
- Re: Olds 350 donor,
Len Sabatine
- Re: Olds 350 donor,
Romans, Mark
- <Possible follow-ups>
- Re: Olds 350 donor,
Bob Valentine
- Re: Olds 350 donor,
Bill Shaw
- Re: Olds 350 donor,
Bob Valentine
- Re: Olds 350 donor,
Tedscj
- Re: Olds 350 donor,
Bob Valentine
- Re: Olds 350 donor,
Tedscj
- Re: Olds 350 donor,
Tedscj
- Re:Olds 350 donor,
sapearso
Where to find Vortec FI parts?,
Tedscj
MEFI info...,
Shannen Durphey
Caprice motor swap...was Re: Olds 350 donor,
OneSS2NV
GM Connectors,
Mike Turner/ENGR/HQ/KEMET/US
[LIST ADMIN] We appear to be down...,
Orin
Re: fuel pump pressure???,
Bruce Plecan
[ADMIN] status update,
Orin
Re: Questions about a table and Table Headers...,
Jeremy Gonyou
Re: EGR valve for SBC,
Len Sabatine
BBC ECM Applications,
Walter Sherwin
Re: misc tpi questions,
Chipsbyal
Re: Server back/THANK YOU <(©¿©)>,
Shannen Durphey
removable chips,
Darryl & Karen Smith
Follow up,
Bruce Plecan
Re: 730 fuel cutoo - spark?,
Ross Myers
Turbo 3.1 Diagrams,
Jeremy Gonyou
binssss',
gary king
Re: Server back/THANK YOU <( ©¿©)>,
sapearso
Mail converted by MHonArc 2.6.11