747 & 4cyls

["Andrew Plunkett" <aplunkett@home.com>]

Ok, I've been reading some more about this stuff now.  I have another couple
questions.  Can the 747 be used with a 4 cyl?  And, can it be used with high
impedance (12-16 ohm) injectors, such as the PI ones on my soob @ 260 cc/min
each?

What I am looking for is something that can utilize some of the stock Soob
stuff.  I already tested the TPS and it gives the same signal as the GM, so
I can use my Soob TB.

Andy Plunkett

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org