Mail Index
- Hey, what happened to the lights?
- From: "TK" <terryk@foothill.net>
- Re: 16176424 PCM pinouts
- From: "Matt Tomlins" <mattpw@ozemail.com.au>
- Re: 16176424 PCM pinouts
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Subject: [admin] List services (automated monthly post)
- From: jsg@esl.eng.ohio-state.edu
- Re: Prom ID with 16198262 ECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Att. Bruce here is the Bin File
- From: "James Wilson" <Wilson.James4@worldnet.att.net>
- Re: Hey, what happened to the lights?
- From: "Dave Zug" <dzug@delanet.com>
- Re: 16176424 PCM pinouts
- From: Richard Wakeling <kojab@ar.com.au>
- Re: DIS Module component ID
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: 16176424 PCM pinouts
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: 16176424 PCM pinouts
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: knock knock goes the jeep....
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- GM Marine 10-pin DLC?
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- EGR and MAP
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: EGR and MAP
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: knock knock goes the jeep....
- From: Terry <thartman@fastlane.net>
- Re: knock knock goes the jeep....
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: GM Marine 10-pin DLC?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: knock knock goes the jeep....
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1227165.. apyu bcc HELP!
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: knock knock goes the jeep....
- 730/727
- Re: GM Marine 10-pin DLC?
- Re: knock knock goes the jeep....
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: DIS Module component ID
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: 730/727
- From: Ward <WSpoonemore@excite.com>
- Re: knock knock goes the jeep....
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730/727
- From: "Dave Zug" <dzug@delanet.com>
- Re: Few questions with regard to programming 101-Big Picture
- From: Shannen Durphey <shannen@grolen.com>
- Re: GM Marine 10-pin DLC?
- From: Shannen Durphey <shannen@grolen.com>
- Re: 730/727
- From: "TK" <terryk@foothill.net>
- DIS ?.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730/727
- From: cwagner@info2000.net
- V6 / 730 ALDL datastream
- From: Bob Valentine <bob@tecmark.com>
- Re: DIS ?.
- From: Frederic Breitwieser <frederic@xephic.dynip.com>
- Re: 730/727
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIS ?.
- From: "Bruce Plecan" <nacelp@bright.net>
- Is someone here disassembling the 3.4L DOHC chip?
- From: bcurrey@pop.ce.mediaone.net
- Re: Is someone here disassembling the 3.4L DOHC chip?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730/727
- From: cwagner@info2000.net
- Nissan Pulsar Exa 195 ECU Pinouts
- From: Andrew Wakeling <kojab@ar.com.au>
- Re[2]: 7730 memory locations
- From: Geoff Richards <gerich@one.net.au>
- Re: Prom ID with 16198262 ECM
- From: "Programmer" <nwester@eidnet.org>
- Re: V6 / 730 ALDL datastream
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: 730/727
- From: Ludis Langens <ludis@cruzers.com>
- Information for converting old carburated systems
- From: Ch-complat@www.dci.co.ir
- sample documented 68hc11 for single point injectio
- From: Ch-complat@www.dci.co.ir
- Re: Information for converting old carburated systems
- From: Shannen Durphey <shannen@grolen.com>
- Re: Is someone here disassembling the 3.4L DOHC chip?
- From: Ludis Langens <ludis@cruzers.com>
- Re: EGR and MAP
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- W32/NewApt virus
- From: hmacneal@allegro.net
- Re: EGR and MAP
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730/727
- From: "TK" <terryk@foothill.net>
- Re: V6 / 730 ALDL datastream
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Wanted M68HC11EVB- Evaluation Board
- Re: DIS ?.
- Re: Prom ID with 16198262 ECM
- From: "James Wilson" <Wilson.James4@worldnet.att.net>
- RE: DIS ?.
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- Re: DIS ?.
- plenum volume
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: DIS ?.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: plenum volume
- From: "Bruce Plecan" <nacelp@bright.net>
- 89 MAF Volt to freq conversion
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: Few questions with regard to programming 101-Big Picture
- From: Shannen Durphey <shannen@grolen.com>
- Re: 730/727
- Re: 730/727
- Re: 730/727
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730/727
- From: Ludis Langens <ludis@cruzers.com>
- Re: plenum volume
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: 730/727
- From: "James Wilson" <Wilson.James4@worldnet.att.net>
- re: 7747 "shaking" the vechile?!
- From: "Mika Helander" <mika_helander@hotmail.com>
- Odp: GM Marine 10-pin DLC?
- From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
- Re: 7747 "shaking" the vechile?!
- RE: 1227165.. apyu bcc HELP!
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: 1227165.. apyu bcc HELP!
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- 94/95 GM PCM + M6 tranny question
- From: Dave Hempstead <dave_hempstead@agilent.com>
- RE: 1227165.. apyu bcc HELP!
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: 1227165.. apyu bcc HELP!
- Re: 94/95 GM PCM + M6 tranny question
- From: Marc Randolph <mrand@pobox.com>
- RE: 1227165.. apyu bcc HELP!
- From: Mike Rolica <mrolica@meridian-mag.com>
- update on knock knock goes the jeep....
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: 94/95 GM PCM + M6 tranny question
- From: Roger Heflin <rah@horizon.hit.net>
- Re: 730/727
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 730/727
- From: Squash <realsquash@yahoo.com>
- Mike bumping into things
- From: Pat Ford <pford@qnx.com>
- Re: 730/727
- From: Pat Ford <pford@qnx.com>
- RE: Mike bumping into things
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Mike bumping into things
- From: Pat Ford <pford@qnx.com>
- RE: Mike bumping into things
- From: Mike Rolica <mrolica@meridian-mag.com>
- Need help on 87 2.8v6
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: 1227165.. apyu bcc HELP!
- From: "Clive Apps Techno-Logicals 416 510 0020" <clive@problem.org>
- Re: 94/95 GM PCM + M6 tranny question
- From: Eric Clark <eclark@hoser.com>
- How to read E6 eeprom while programming ?
- Re: Need help on 87 2.8v6
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: plenum volume
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Need help on 87 2.8v6
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: 730/727
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 730/727
- From: Pat Ford <pford@qnx.com>
- Re: 730/727
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1227165.. apyu bcc HELP!
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Spk747_3.ecu
- From: "Jon Fedock" <Galadar@worldnet.att.net>
- Re: 730/727
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 730/727
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 730/727
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: 730/727
- From: "the Fredericks" <fredericksk@worldnet.att.net>
- Re: 730/727
- From: Shannen Durphey <shannen@grolen.com>
- CarBytes v2
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- Re: 1227165.. apyu bcc HELP!
- From: Tom Sharpe <twsharpe@mtco.com>
- Airbag DIag, was: re: Mike bumping into things
- From: "Dave Zug" <dzug@delanet.com>
- Re: 730/727
- From: "Dave Zug" <dzug@delanet.com>
- New to the group..
- From: "Ken Kelly" <ken73@houston.rr.com>
- Mapedit? - http://www.uq.net.au/~zzchack/smapedit.html
- From: Christian Hack <christianh@edmi.com.au>
- Re: 730/727
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 730/727
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 730/727
- Re: 730/727
- Re: New to the group..
- From: Shannen Durphey <shannen@grolen.com>
- Re: Mapedit? - http://www.uq.net.au/~zzchack/smapedit.html
- From: cwagner@info2000.net
- Re: Need help on 87 2.8v6
- From: Bob Valentine <bob@tecmark.com>
- RE: 7747 "shaking" the vechile?!
- From: Mika.Helander@softbit.fi
- Re: 730/727
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: New to the group..
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: 730/727
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: New to the group..
- From: Shannen Durphey <shannen@grolen.com>
- RE: Need help on 87 2.8v6
- From: Mike Rolica <mrolica@meridian-mag.com>
- EST
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: CarBytes v2
- From: Daniel Ciobota <dciobota@hiwaay.net>
- Re: 730/727
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 89 MAF Volt to freq conversion
- From: DC Smith <morepoweral@tetranet.net>
- RE: 89 MAF Volt to freq conversion
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Need help on 87 2.8v6
- From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
- Re: Need help on 87 2.8v6
- From: Shannen Durphey <shannen@grolen.com>
- Re: .ecu
- From: cwagner@info2000.net
- RE: .ecu
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: .ecu
- From: mswayze@truswood.com (Mike Swayze)
- RE: .ecu
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: .ecu
- From: cwagner@info2000.net
- RE: .ecu
- From: cwagner@info2000.net
- Re: .ecu
- From: mswayze@truswood.com (Mike Swayze)
- Re: 730/727
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EST
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: .ecu
- From: "Bruce Plecan" <nacelp@bright.net>
- P4 and on Memory Mapping
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: P4 and on Memory Mapping
- From: Ward <wspoonemore@excite.com>
- Re: P4 and on Memory Mapping
- From: Roger Heflin <rah@horizon.hit.net>
- Re: 89 MAF Volt to freq conversion
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: 165 to late MAF
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- RE: New to the group..
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: 89 MAF Volt to freq conversion
- From: Mark Romans <romans@pacbell.net>
- Re: 89 MAF Volt to freq conversion
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: 165 to late MAF
- From: PCMdoc <PCMdoc@surfree.com>
- RE: 89 MAF Volt to freq conversion
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: 165 to late MAF
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: 89 MAF Volt to freq conversion
- From: DC Smith <morepoweral@tetranet.net>
- Re: 89 MAF Volt to freq conversion
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 89 MAF Volt to freq conversion
- From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
- Re: 89 MAF Volt to freq conversion
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: 89 MAF Volt to freq conversion
- From: Carl Summers <InTech@writeme.com>
- sitepage(previously 89 MAF Volt...)
- From: mswayze@truswood.com (Mike Swayze)
- RE: 89 MAF Volt to freq conversion
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: 89 MAF Volt to freq conversion
- From: "Bruce Plecan" <nacelp@bright.net>
- Archives
- From: "Geoff Richards" <gerich@one.net.au>
- Re: Archives
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Archives
- From: digi <digi@saturn.terahertz.net>
- Re: Archives
- From: "Geoff Richards" <gerich@one.net.au>
- Re: Archives
- From: "Geoff Richards" <gerich@one.net.au>
- Re: Archives
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Archives
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Archives
- From: Eric Clark <eclark@hoser.com>
- Re: Archives
- From: digi <digi@saturn.terahertz.net>
- Re: Archives
- From: Shannen Durphey <shannen@grolen.com>
- Re: Need help on 87 2.8v6
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: Archives
- From: Scott Knight <sknight@mich.com>
- Re: Archives
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: .ecu
- From: mswayze@truswood.com (Mike Swayze)
- Re: .ecu/prom masks, some variants
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Archives
- From: "Bruce Plecan" <nacelp@bright.net>
- More stunning news from CSH, HQ
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: 89 MAF Volt to freq conversion
- From: "the Fredericks" <fredericksk@worldnet.att.net>
- Re: Archives
- From: bearbvd@cmn.net (Greg Hermann)
- Re: Archives
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 165 to late MAF
- From: PCMdoc <PCMdoc@surfree.com>
- Re: Archives
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Archives
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: P4 and on Memory Mapping
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- New GM web site
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: New to the group..
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- 730 DIS
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- RE: 165 to late MAF
- From: "Ken Kelly" <ken73@houston.rr.com>
- X-fire
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: 165 to late MAF
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: X-fire
- From: Shannen Durphey <shannen@grolen.com>
- Re: Archives
- From: Scott Knight <sknight@mich.com>
- Re: Archives
- From: Scott Knight <sknight@mich.com>
- X-fire
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: X-fire
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 DIS
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: 165 to late MAF
- From: "Ken Kelly" <ken73@houston.rr.com>
- RE: X-fire
- From: "Ken Kelly" <ken73@houston.rr.com>
- RE: X-fire
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: X-fire
- From: Shannen Durphey <shannen@grolen.com>
- Re: X-fire
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 165 to late MAF
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: .ecu
- From: cwagner@info2000.net
- Re: Archives
- From: "Geoff Richards" <gerich@one.net.au>
- Re: 165 to late MAF
- From: PCMdoc <PCMdoc@surfree.com>
- Re: 165 to late MAF
- From: PCMdoc <PCMdoc@surfree.com>
- Re: 165 to late MAF
- From: PCMdoc <PCMdoc@surfree.com>
- RE: Archives
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Archives
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Archives
- Re: Archives
- From: Scott Knight <sknight@mich.com>
- RE: 730 DIS
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: 165 to late MAF
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: 730 DIS
- From: Marc Randolph <mrand@pobox.com>
- Re: .ecu/prom masks, some variants
- From: mswayze@truswood.com (Mike Swayze)
- Re: Archives
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: Archives
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: Archives
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- more DIS questions
- From: mswayze@truswood.com (Mike Swayze)
- Re: 730 DIS
- From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
- Re: 730 DIS
- From: mswayze@truswood.com (Mike Swayze)
- Re: P4 and on Memory Mapping
- From: Ward <WSpoonemore@excite.com>
- Re: 730 DIS
- From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
- x-fire pinouts
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: 730 DIS
- From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
- Re: .ecu/prom masks, some variants
- From: cwagner@info2000.net
- Datasheet for MC33199
- From: Andrew Mattei <amattei@mindspring.com>
- Re: 730 DIS
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 DIS
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 DIS
- From: mswayze@truswood.com (Mike Swayze)
- Re: 730 DIS
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: x-fire pinouts
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 DIS
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: x-fire pinouts
- From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
- Re: P4 and on Memory Mapping
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: X-fire
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: x-fire pinouts
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Archives
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 165 to late MAF
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 165 to late MAF
- Re: Airbag DIag, was: re: Mike bumping into things
- Re: Archives
- Re: 730 DIS
- Re: x-fire pinouts
- From: Shannen Durphey <shannen@grolen.com>
- Re: more DIS questions
- From: Shannen Durphey <shannen@grolen.com>
- Opel Barina Pin-outs
- From: Richard Wakeling <kojab@ar.com.au>
- VSS output
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: 730 DIS
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 730 DIS
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 DIS
- From: "John T. Martin" <gmman@eskimo.com>
- Re: 730 DIS
- From: "TK" <terryk@foothill.net>
- Odp: Datasheet for MC33199
- From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
- Re: Opel Barina Pin-outs
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: Datasheet for MC33199
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: x-fire pinouts
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: 16176424 PCM pinouts
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: 730 DIS
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: more DIS questions
- From: Bob Valentine <bob@tecmark.com>
- Re: 730 DIS
- From: Bob Valentine <bob@tecmark.com>
- Re: 730 DIS
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 DIS
- From: Shannen Durphey <shannen@grolen.com>
- Re: more DIS questions
- From: "TK" <terryk@foothill.net>
- Re: more DIS questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: more DIS questions
- From: Shannen Durphey <shannen@grolen.com>
- Re: more DIS questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: more DIS questions
- From: bearbvd@cmn.net (Greg Hermann)
- 96 LT1
- From: "gene l. clifford" <genelc@idworld.net>
- Re: 96 LT1
- From: Roger Heflin <rah@horizon.hit.net>
- RE: 96 LT1
- From: "the Fredericks" <fredericksk@worldnet.att.net>
- Re: 730/727
- From: cwagner@info2000.net
- Re: 96 LT1
- From: "gene l. clifford" <genelc@idworld.net>
- Re: more DIS questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730/727
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730/727
- Re: 730/727
- From: cwagner@info2000.net
- Re: 730/727
- From: "Bruce Plecan" <nacelp@bright.net>
- Timing Jump on 165/TPI System
- From: "Craig Moates" <craig.moates@home.com>
- Re: Timing Jump on 165/TPI System
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 96 LT1
- From: Shannen Durphey <shannen@grolen.com>
- Re: more DIS questions
- From: bearbvd@cmn.net (Greg Hermann)
- Re: 96 LT1
- From: Shannen Durphey <shannen@grolen.com>
- Re: more DIS questions
- From: Shannen Durphey <shannen@grolen.com>
- Re: VSS output
- From: Ludis Langens <ludis@cruzers.com>
- Re: .ecu/prom masks, some variants
- From: Ludis Langens <ludis@cruzers.com>
- Re: New to the group..
- From: Ludis Langens <ludis@cruzers.com>
- Re: Need help on 87 2.8v6
- From: Ludis Langens <ludis@cruzers.com>
- Re: 730 DIS
- From: Ludis Langens <ludis@cruzers.com>
- Re: Archives
- From: "Geoff Richards" <gerich@one.net.au>
- L -plates
- From: "Paul Smith" <ou8acpu@bigpond.com>
- DIS Tach signal
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: L -plates
- From: "Bruce Plecan" <nacelp@bright.net>
- 4 Cyl 730
- From: "Bruce Plecan" <nacelp@bright.net>
- Snap On Scan Tool
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: more DIS questions
- From: bearbvd@cmn.net (Greg Hermann)
- Re: Timing Jump on 165/TPI System
- From: "John T. Martin" <gmman@eskimo.com>
- Re: Timing Jump on 165/TPI System
- Re: Timing Jump on 165/TPI System
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIS Tach signal
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EST
- From: "Programmer" <nwester@eidnet.org>
- Re: EST
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: more DIS questions
- From: Ward <WSpoonemore@excite.com>
- Re: more DIS questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EST
- From: Mark Romans <romans@pacbell.net>
- Re: Timing Jump on 165/TPI System
- From: Mark Romans <romans@pacbell.net>
- Freighting an engine.
- From: "TK" <terryk@foothill.net>
- Re: Freighting an engine.
- From: "Clive Apps Techno-Logicals 416 510 0020" <clive@problem.org>
- Re: Snap On Scan Tool
- From: Shannen Durphey <shannen@grolen.com>
- Re: EST
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Timing Jump on 165/TPI System
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIS Tach signal
- From: Shannen Durphey <shannen@grolen.com>
- Re: Timing Jump on 165/TPI System
- From: Shannen Durphey <shannen@grolen.com>
- Re: Timing Jump on 165/TPI System
- From: Mark Romans <romans@pacbell.net>
- Re: Timing Jump on 165/TPI System
- From: Mark Romans <romans@pacbell.net>
- Re: Freighting an engine.
- Re: Freighting an engine.
- From: "Dave Zug" <dzug@delanet.com>
- Re: Timing Jump on 165/TPI System
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Freighting an engine.
- From: "TK" <terryk@foothill.net>
- Re: Freighting an engine.
- From: "TK" <terryk@foothill.net>
- Re: Freighting an engine.
- From: "TK" <terryk@foothill.net>
- RE: Freighting an engine.
- From: Carl Summers <InTech@writeme.com>
- Re: Timing Jump on 165/TPI System
- From: Mark Romans <romans@pacbell.net>
- Re: Freighting an engine.
- From: Shannen Durphey <shannen@grolen.com>
- Re: Timing Jump on 165/TPI System
- From: Mark Romans <romans@pacbell.net>
- Emulating... the pros
- From: Shannen Durphey <shannen@grolen.com>
- Re: Freighting an engine.
- From: "gene l. clifford" <genelc@idworld.net>
- Re: Emulating... the pros
- From: "TK" <terryk@foothill.net>
- Re: Freighting an engine.
- From: "TK" <terryk@foothill.net>
- Re: Freighting an engine.
- From: "Clive Apps Techno-Logicals 416 510 0020" <clive@problem.org>
- IAC Orifice
- From: mswayze@truswood.com (Mike Swayze)
- Re: 4 Cyl 730
- From: Pat Ford <pford@qnx.com>
- 92 LT1 chip and computer
- From: Carl Summers <InTech@writeme.com>
- Re: Snap On Scan Tool
- From: "Programmer" <nwester@eidnet.org>
- Re: 92 LT1 chip and computer
- From: Roger Heflin <rah@horizon.hit.net>
- RE: 92 LT1 chip and computer
- From: Carl Summers <InTech@writeme.com>
- RE: 92 LT1 chip and computer
- From: Roger Heflin <rah@horizon.hit.net>
- LT1 manifold question (sort of NOT ECM related)
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: LT1 manifold question (sort of NOT ECM related)
- From: Roger Heflin <rah@horizon.hit.net>
- Re: LT1 manifold question (sort of NOT ECM related)
- From: Rick Lindstedt <rick@mafb.org>
- Re: LT1 manifold question (sort of NOT ECM related)
- From: Andrew Choset <agc3@cornell.edu>
- Re: LT1 manifold question (sort of NOT ECM related)
- From: Eric Clark <eclark@hoser.com>
- RE: LT1 manifold question (sort of NOT ECM related)
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: LT1 manifold question (sort of NOT ECM related)
- From: Rick Lindstedt <rick@mafb.org>
- LT1 manifold adaptation (was question)
- From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
- Re: 92 LT1 chip and computer
- From: Shannen Durphey <shannen@grolen.com>
- Re: LT1 manifold question (sort of NOT ECM related)
- From: Shannen Durphey <shannen@grolen.com>
- Crank Angle Sensors
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- RE: Freighting an engine.
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: Crank Angle Sensors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Timing Jump on 165/TPI System
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Timing Jump on 165/TPI System
- From: Mark Romans <romans@pacbell.net>
- Re: Snap On Scan Tool
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Datasheet for MC33199
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Crank Angle Sensors
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: Snap On Scan Tool
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Crank Angle Sensors
- From: Shannen Durphey <shannen@grolen.com>
- Re: Snap On Scan Tool
- From: Shannen Durphey <shannen@grolen.com>
- RE: Timing Jump on 165/TPI System
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: EST
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Timing Jump on 165/TPI System
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Snap On Scan Tool
- From: Shannen Durphey <shannen@grolen.com>
- dead simple recap
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- VSS on 730
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- RE: dead simple recap
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- Re: dead simple recap
- From: Shannen Durphey <shannen@grolen.com>
- Re: dead simple recap
- From: mswayze@truswood.com (Mike Swayze)
- RE: dead simple recap
- From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
- prom emulator circuit--PCAD
- From: mswayze@truswood.com (Mike Swayze)
- RE: prom emulator circuit--PCAD
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: prom emulator circuit--PCAD
- From: Carl Summers <InTech@writeme.com>
- Re: Timing Jump on 165/TPI System
- From: Mark Romans <romans@pacbell.net>
- Re: Timing Jump on 165/TPI System
- From: "Bruce Plecan" <nacelp@bright.net>
- Ken & Shannon re:Crossfire to 7747 pinout
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Timing Jump on 165/TPI System
- From: Mark Romans <romans@pacbell.net>
- Re: prom emulator circuit--PCAD
- From: steve <steve@roundmailingsystems.com>
- Re: VSS on 730
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: dead simple recap
- From: "Bruce Plecan" <nacelp@bright.net>
- 68HC11 Disassembler...
- From: Donald Whisnant <dewhisna@ix.netcom.com>
- Re: dead simple recap
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: LT1 manifold question (sort of NOT ECM related)
- From: "gene l. clifford" <genelc@idworld.net>
- RE: Ken & Shannon re:Crossfire to 7747 pinout
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: Ken & Shannon re:Crossfire to 7747 pinout
- From: "Kevin Reynolds" <kereyn@gte.net>
- another Xfire to 7747 wiring question.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Snap On Scan Tool
- From: Thomas McCabe <mccabet@mediaone.net>
- Re: dead simple recap
- From: Ludis Langens <ludis@cruzers.com>
- Re: VSS on 730
- From: Ludis Langens <ludis@cruzers.com>
- Odp: OBDII cable source
- From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
- injectors
- From: cwagner@info2000.net
- Re: prom emulator circuit--PCAD
- From: Karon Swayze <kswayze@bellsouth.net>
- MC6803U4 info?
- From: "Daniel R. Henriksson" <rotax@ludd.luth.se>
- Re: injectors
- From: Richard Wakeling <kojab@ar.com.au>
- Re: Snap On Scan Tool
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: dead simple recap
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: VSS on 730
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: VSS on 730
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Snap On Scan Tool
- From: "Programmer" <nwester@eidnet.org>
- Re: injectors
- From: "Programmer" <nwester@eidnet.org>
- again:eprom emulator circuits-pcad
- From: Swayze <kswayze@bellsouth.net>
- Re: another Xfire to 7747 wiring question.
- From: Shannen Durphey <shannen@grolen.com>
- Re: Snap On Scan Tool
- From: Frederic Breitwieser <frederic@xephic.dynip.com>
- Re: Ken & Shannon re:Crossfire to 7747 pinout
- From: Shannen Durphey <shannen@grolen.com>
- Re: Snap On Scan Tool
- From: Shannen Durphey <shannen@grolen.com>
- Re: Snap On Scan Tool
- From: Thomas McCabe <mccabet@mediaone.net>
- Dual injector select on crossfire injection.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: injectors
- From: cwagner@info2000.net
- Re: Dual injector select on crossfire injection.
- From: Ludis Langens <ludis@cruzers.com>
- Re: VSS on 730
- From: Ludis Langens <ludis@cruzers.com>
- Re: MC6803U4 info?
- From: Ludis Langens <ludis@cruzers.com>
- Re: Snap On Scan Tool
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- ECM Bench kelp needed
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: ECM Bench kelp needed
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: ECM Bench kelp needed
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: ECM Bench kelp needed
- RE: Timing Jump on 165/TPI System
- From: Mike Rolica <mrolica@meridian-mag.com>
- Hi and just joined this group
- From: Team ZR1 <teamzr1@teamzr1.com>
- RE: ECM Bench kelp needed
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Hi and just joined this group
- From: Swayze <kswayze@bellsouth.net>
- Re: Hi and just joined this group
- From: Swayze <kswayze@bellsouth.net>
- Re: Dual injector select on crossfire injection.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Timing Jump on 165/TPI System
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: ECM Bench kelp needed
- Re: Hi and just joined this group
- From: Mark Romans <romans@pacbell.net>
- Re: Hi and just joined this group
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Hi and just joined this group
- From: Team ZR1 <teamzr1@teamzr1.com>
- 7747 AC connection.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Introduction
- From: "Sam Stratton" <transamsam@hotmail.com>
- Re: Introduction
- From: "TK" <terryk@foothill.net>
- RE: Snap On Scan Tool
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: MC6803U4 info?
- From: "Daniel R. Henriksson" <rotax@ludd.luth.se>
- Memcals
- From: "Geoff Richards" <gerich@one.net.au>
- Re: Memcals
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Memcals
- Re: Memcals
- From: Swayze <kswayze@bellsouth.net>
- Re: Snap On Scan Tool
- From: "Programmer" <nwester@eidnet.org>
- Re: Snap On Scan Tool
- From: "Programmer" <nwester@eidnet.org>
- CR Util
- From: "Dave Zug." <dzug@delanet.com>
- Re: Memcals
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Memcals
- From: "Geoff Richards" <gerich@one.net.au>
- Re: Memcals
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Memcals
- From: steve ravet <sravet@arm.com>
- Re: Memcals
- From: "Dave Zug" <dzug@delanet.com>
- What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Memcals
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
- From: Mark Romans <romans@pacbell.net>
- Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
- From: Shannen Durphey <shannen@grolen.com>
- Re: What model ECM is this ?
- From: Shannen Durphey <shannen@grolen.com>
- Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
- From: Ludis Langens <ludis@cruzers.com>
- starting point L-plates
- From: "Paul Smith" <ou8acpu@bigpond.com>
- Re: What model ECM is this ?
- From: Scot Sealander <Sealand@clarityconnect.com>
- [no subject]
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- 1227165 89 and Burst knock
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: What model ECM is this ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: starting point L-plates
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: What model ECM is this ?
- From: bearbvd@cmn.net (Greg Hermann)
- Re: Memcals
- From: Swayze <kswayze@bellsouth.net>
- Re;Re: What model ECM is this ?
- From: Swayze <kswayze@bellsouth.net>
- Gummy Chryslers
- From: "Programmer" <nwester@eidnet.org>
- Re: Memcals
- From: Swayze <kswayze@bellsouth.net>
- Re: Gummy Chryslers
- From: Swayze <kswayze@bellsouth.net>
- Re: Gummy Chryslers
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: Gummy Chryslers
- From: Swayze <kswayze@bellsouth.net>
- Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
- From: Mark Romans <romans@pacbell.net>
- Re: What model ECM is this ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: What model ECM is this ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1227165 89 and Burst knock
- From: Mark Romans <romans@pacbell.net>
- Re: 1227165 89 and Burst knock
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: What model ECM is this ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1227165 89 and Burst knock
- From: Mark Romans <romans@pacbell.net>
- Clues needed
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Clues needed
- From: Mark Romans <romans@pacbell.net>
- Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- BBC ACFB?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Clues needed
- From: PCMdoc <PCMdoc@surfree.com>
- Re: What model ECM is this ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: What model ECM is this ?
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: Clues needed
- From: "TK" <terryk@foothill.net>
- Re: Memcals
- From: "Dave Zug" <dzug@delanet.com>
- Re: Memcals
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- OFF SUBJECT re: WHAY ECM IS THIS
- From: Swayze <kswayze@bellsouth.net>
- Re: Memcals
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Clues needed
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Clues needed
- From: PCMdoc <PCMdoc@surfree.com>
- Re: Memcals
- From: "Dave Zug" <dzug@delanet.com>
- Re: Clues needed
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: What model ECM is this ?
- From: Shannen Durphey <shannen@grolen.com>
- Re: Clues needed
- From: bearbvd@cmn.net (Greg Hermann)
- Re: Clues needed
- From: bearbvd@cmn.net (Greg Hermann)
- Re: What model ECM is this ?
- From: Shannen Durphey <shannen@grolen.com>
- Re: Gummy Chryslers
- From: Shannen Durphey <shannen@grolen.com>
- Re: Memcals
- From: Shannen Durphey <shannen@grolen.com>
- I'm new...test
- From: ronald.j.selberg@exgate.tek.com
- ECM data logging w/new laptop
- From: James P Hunt <war_machine1@juno.com>
- Re: Memcals
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: Memcals
- From: Shannen Durphey <shannen@grolen.com>
- Introduction
- From: ronald.j.selberg@exgate.tek.com
- Re: Gummy Chryslers
- From: "Programmer" <nwester@eidnet.org>
- Re: Gummy Chryslers
- From: "Programmer" <nwester@eidnet.org>
- RE: Gummy Chryslers
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: Gummy Chryslers
- From: Shannen Durphey <shannen@grolen.com>
- Re: Gummy Chryslers
- From: Jason Weir <jweir@worldnet.att.net>
- High Flow MAF revisited - (Porsche 928 voltage MAF)
- From: Davis <davis@mail.eecis.udel.edu>
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
- From: "Dave Zug" <dzug@delanet.com>
- Re: Gummy Chryslers
- From: bearbvd@cmn.net (Greg Hermann)
- Re: Gummy Chryslers
- From: "Dave Zug" <dzug@delanet.com>
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: GMECM Digest V2 #20
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Gummy Chryslers
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: Gummy Chryslers
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- bin needed
- From: Shannen Durphey <shannen@grolen.com>
- Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
- From: Mark Romans <romans@pacbell.net>
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
- From: Mark Romans <romans@pacbell.net>
- Bin recieved...
- From: Shannen Durphey <shannen@grolen.com>
- Re: What model ECM is this ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
- From: David Cooley <n5xmt@bellsouth.net>
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
- From: "Dave Zug" <dzug@delanet.com>
- Re: What model ECM is this ?
- From: Scott Knight <scott@scottknight.com>
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
- From: "Dave Zug" <dzug@delanet.com>
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: Clues needed
- From: "alexpeper" <alexpeper@email.msn.com>
- RE;Re: What model ECM is this ?
- From: Swayze <kswayze@bellsouth.net>
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
- From: Swayze <kswayze@bellsouth.net>
- Re: RE;Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: High Flow MAF revisited - (Porsche 928 voltage MAF)
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
- From: Mark Romans <romans@pacbell.net>
- Re: What model ECM is this ?
- From: Mark Romans <romans@pacbell.net>
- Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: What model ECM is this ?
- From: Shannen Durphey <shannen@grolen.com>
- Re: What model ECM is this ?
- Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- 730 .ecu file
- From: James P Hunt <war_machine1@juno.com>
- .bin file needed..
- From: Mike Wesley <mwesley@mediaone.net>
- Re: 730 .ecu file
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 .ecu file
- From: James P Hunt <war_machine1@juno.com>
- Re: 730 .ecu file
- From: James P Hunt <war_machine1@juno.com>
- Re: Timing Jump on 165/TPI System
- From: Mark Romans <romans@pacbell.net>
- Re: RE;Re: What model ECM is this ?
- From: Swayze <kswayze@bellsouth.net>
- Re: .bin file needed..
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 .ecu file
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Timing Jump on 165/TPI System
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Timing Jump on 165/TPI System
- From: Mark Romans <romans@pacbell.net>
- Re: 730 .ecu file
- From: Shannen Durphey <shannen@grolen.com>
- Re: Fw: 747 programing
- From: "Dave Zug" <dzug@delanet.com>
- Re: 730 .ecu file
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 .ecu file
- From: "TK" <terryk@foothill.net>
- Re: Fw: 747 programing
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 .ecu file
- From: "Robert W. Hughes" <rwhughe@ev1.net>
- CarBytes V2 now on GM-ECM ftp site
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- Re: 730 .ecu file
- From: "TK" <terryk@foothill.net>
- RE: starting point L-plates
- From: Mika.Helander@softbit.fi
- Spark Reference Angle for 8 pin HEI module
- From: Stuart Bunning <stuart@kenelec.com.au>
- Re: Spark Reference Angle for 8 pin HEI module
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: What model ECM is this ?
- From: Daniel Ciobota <dciobota@hiwaay.net>
- Re: What model ECM is this ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: What model ECM is this ?
- From: Team ZR1 <teamzr1@teamzr1.com>
- Red Alert, Bin needed
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 .ecu file
- From: James P Hunt <war_machine1@juno.com>
- Re: 730 .ecu file
- From: James P Hunt <war_machine1@juno.com>
- Re: 730 .ecu file
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 .ecu file
- From: James P Hunt <war_machine1@juno.com>
- Re: CarBytes V2 now on GM-ECM ftp site
- From: Daniel Ciobota <dciobota@hiwaay.net>
- Re: Gummy Chryslers
- From: "Programmer" <nwester@eidnet.org>
- Syncing crossfire injection
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Gummy Chryslers
- From: "Programmer" <nwester@eidnet.org>
- Re: Gummy Chryslers
- From: Swayze <kswayze@bellsouth.net>
- Re: Gummy Chryslers
- From: Swayze <kswayze@bellsouth.net>
- Re: 730 .ecu file
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Syncing crossfire injection
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: .bin file needed..
- From: "Walter Sherwin" <wsherwin@idirect.com>
- RE: Syncing crossfire injection
- From: "Ken Kelly" <ken73@houston.rr.com>
- MAF conversion revisited
- From: Swayze <kswayze@bellsouth.net>
- RE: Syncing crossfire injection
- From: bearbvd@cmn.net (Greg Hermann)
- RE: Syncing crossfire injection
- From: "Ken Kelly" <ken73@houston.rr.com>
- RE: Syncing crossfire injection
- From: bearbvd@cmn.net (Greg Hermann)
- Software request
- From: Ch-complat@www.dci.co.ir
- Re: starting point L-plates
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: CarBytes V2 now on GM-ECM ftp site
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- Re: starting point L-plates
- From: "Paul Smith" <ou8acpu@bigpond.com>
- Re: Software request
- From: Swayze <kswayze@bellsouth.net>
- CarBytes V2_All.zip now on GM-ECM ftp site (nm)
- From: "John LeBlanc" <jleblanc@malcams.com>
- Re: Gummy Chryslers
- From: "Programmer" <nwester@eidnet.org>
- Re: Red Alert, Bin needed
- From: "Programmer" <nwester@eidnet.org>
- '730 ecu
- From: Swayze <kswayze@bellsouth.net>
- Re: Red Alert, Bin needed
- From: "Bruce Plecan" <nacelp@bright.net>
- LT5 Info.., and 1228331 stuff in general.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '730 ecu
- From: "Bruce Plecan" <nacelp@bright.net>
- Just a little follow up to LT5 posting
- From: "Bruce Plecan" <nacelp@bright.net>
- Scantool for '93 4.3L?
- From: Jared Tschetter <jtschetter@vermeermfg.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Daniel Ciobota <dciobota@hiwaay.net>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Scantool for '93 4.3L?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Marc Randolph <mrand@pobox.com>
- Re: Scantool for '93 4.3L?
- From: Jared Tschetter <jtschetter@vermeermfg.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Scantool for '93 4.3L?
- From: Carl Summers <InTech@writeme.com>
- Uploading Stuff To FTP Incoming
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: '730 ecu
- From: "Programmer" <nwester@eidnet.org>
- Re: '730 ecu
- From: "Programmer" <nwester@eidnet.org>
- Vette serial data and scan tool communications
- From: Shannen Durphey <shannen@grolen.com>
- VSS question
- From: Andrew Choset <agc3@cornell.edu>
- Re: Uploading Stuff To FTP Incoming
- From: Shannen Durphey <shannen@grolen.com>
- Got Diacom to work on Snakeskinner
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: Just a little follow up to LT5 posting
- From: Shannen Durphey <shannen@grolen.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Shannen Durphey <shannen@grolen.com>
- Re: VSS question
- From: Mark Romans <romans@pacbell.net>
- Re: Syncing crossfire injection
- From: "Dave Zug" <dzug@delanet.com>
- Re: VSS question
- From: "Bruce Plecan" <nacelp@bright.net>
- Hex clue
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: Hex clue
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '730 ecu
- From: Swayze <kswayze@bellsouth.net>
- Re: '730 ecu
- From: Ludis Langens <ludis@cruzers.com>
- Re: '730 ecu
- From: Swayze <kswayze@bellsouth.net>
- Re: VSS question
- Re: '730 ecu
- From: Ludis Langens <ludis@cruzers.com>
- Re: Memcals
- From: Ludis Langens <ludis@cruzers.com>
- Prom burning
- Re: '730 ecu
- From: Swayze <kswayze@bellsouth.net>
- Re: Memcals
- From: Swayze <kswayze@bellsouth.net>
- Re: Prom burning
- From: Rick Lindstedt <rick@mafb.org>
- '7429, 2.8tbi v6
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: '730 ecu
- From: "Programmer" <nwester@eidnet.org>
- Re: Prom burning
- From: "Programmer" <nwester@eidnet.org>
- Re: .bin file needed..
- From: Mike Wesley <mwesley@mediaone.net>
- Re: '730 ecu
- From: "Programmer" <nwester@eidnet.org>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Marc Randolph <mrand@pobox.com>
- Car bytes newbie question
- From: Rick Lindstedt <rick@mafb.org>
- Re: Got Diacom to work on Snakeskinner
- From: Daniel Ciobota <dciobota@hiwaay.net>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Ken Kelly <kenkelly@lucent.com>
- Re: Got Diacom to work on Snakeskinner
- From: Ken Kelly <kenkelly@lucent.com>
- Re: Uploading Stuff To FTP Incoming
- From: steve ravet <sravet@arm.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Marc Randolph <mrand@pobox.com>
- Re: Got Diacom to work on Snakeskinner
- From: Daniel Ciobota <dciobota@hiwaay.net>
- Re: Got Diacom to work on Snakeskinner
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Swayze <kswayze@bellsouth.net>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Mark Romans <romans@pacbell.net>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Team ZR1 <teamzr1@teamzr1.com>
- fuel pump for GM TPI
- From: Vinnie Moscaritolo <vinnie@vmeng.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Swayze <kswayze@bellsouth.net>
- Re: fuel pump for GM TPI
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- 'Nother pinout needed..
- From: Shannen Durphey <shannen@grolen.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: "Bruce Plecan" <nacelp@bright.net>
- 454SS Truck ".bin" File
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: Got Diacom to work on Snakeskinner
- From: Shannen Durphey <shannen@grolen.com>
- [ADMIN] Lists are moving!
- From: Orin Eman <orin@WOLFENET.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: "Bruce Plecan" <nacelp@bright.net>
- New to the list...
- From: "C and T" <candt@techcom.net>
- Re: fuel pump for GM TPI
- From: Squash <realsquash@yahoo.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Squash <realsquash@yahoo.com>
- Re: [ADMIN] Lists are moving!
- From: Shannen Durphey <shannen@grolen.com>
- RE: LT5 Info.., and 1228331 stuff in general.
- From: "Randy Lyon" <randylyon@home.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Swayze <kswayze@bellsouth.net>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Swayze <kswayze@bellsouth.net>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Squash <realsquash@yahoo.com>
- Re: Car bytes newbie question
- From: "Programmer" <nwester@eidnet.org>
- Re: Red Alert, Bin needed
- From: "Programmer" <nwester@eidnet.org>
- Re: Scantool for '93 4.3L?
- From: "Programmer" <nwester@eidnet.org>
- Re: fuel pump for GM TPI
- From: "Ron Gregory" <syclone@home.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Team ZR1 <teamzr1@teamzr1.com>
- Re: Red Alert, Bin needed
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: 454SS Truck ".bin" File
- From: "Mike" <Itsmike@lvcm.com>
- Re: 454SS Truck ".bin" File
- From: "Programmer" <nwester@eidnet.org>
- Re: Got Diacom to work on Snakeskinner
- From: Daniel Ciobota <dciobota@hiwaay.net>
- Re: Got Diacom to work on Snakeskinner
- From: Daniel Ciobota <dciobota@hiwaay.net>
- Re: fuel pump for GM TPI
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- Re: 'Nother pinout needed..
- From: cwagner@info2000.net
- Prog 101
- From: "Todorovic" <todorovic@home.com>
- Re: Prog 101
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Ken Kelly <kenkelly@lucent.com>
- IAT MAT differences
- From: "Bruce Plecan" <nacelp@bright.net>
- Corvette ECM
- 7730v2 ecu file
- From: cwagner@info2000.net
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: "TK" <terryk@foothill.net>
- [ADMIN] test - ignore
- IAC parameters
- From: Barry Tisdale <btisdale@cybersol.com>
- [admin] test 2
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: "Bruce Plecan" <nacelp@bright.net>
- [ADMIN] The Move
- Re: 454SS Truck ".bin" File
- From: "Walter Sherwin" <wsherwin@idirect.com>
- HOORAY! and bigMaF
- From: "Dave Zug" <dzug@delanet.com>
- CarBytes v2 toolbar problem
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- Re: HOORAY! and bigMaF
- From: "Dave Zug" <dzug@delanet.com>
- Re: HOORAY! and bigMaF
- From: Shannen Durphey <shannen@grolen.com>
- 7730v3 ecu file
- From: cwagner@info2000.net
- Re: [ADMIN] The Move
- From: steve ravet <sravet@arm.com>
- Re: New to the list...
- From: steve ravet <sravet@arm.com>
- RE: IAC parameters
- From: "Jim Sloan" <leroy@sunflower.com>
- Re: IAC parameters
- From: "Bruce Plecan" <nacelp@bright.net>
- DIS ?????s
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: New to the list...
- From: "Bruce Plecan" <nacelp@bright.net>
- 89 Corvette ECM
- RE: DIS ?????s
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- Re: 89 Corvette ECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 89 Corvette ECM
- From: gabe <gellett@earthlink.net>
- Re: 89 Corvette ECM
- Re: 89 Corvette ECM
- Knock Sensor Tidbit
- From: Ludis Langens <ludis@cruzers.com>
- RE: LT5 Info.., and 1228331 stuff in general.
- From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
- Knock sensor pins
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: 89 Corvette ECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: IAT MAT differences
- From: Scot Sealander <Sealand@clarityconnect.com>
- ftp site
- From: steve ravet <sravet@arm.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: "TK" <terryk@foothill.net>
- Re: LT5 Info.., and 1228331 stuff in general.
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Shannen Durphey <shannen@grolen.com>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: "TK" <terryk@foothill.net>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: IAC parameters
- From: "Bruce Plecan" <nacelp@bright.net>
- Disguised scan tool
- From: Shannen Durphey <shannen@grolen.com>
- Re: IAC parameters
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: IAC parameters
- From: Shannen Durphey <shannen@grolen.com>
- Re: IAC parameters
- From: Ludis Langens <ludis@cruzers.com>
- Re: IAC parameters
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: IAC parameters
- From: "Bruce Plecan" <nacelp@bright.net>
- Send pics
- From: "Mark Huffman" <huffman3@netzero.net>
- RE: Send pics
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- Re: LT5 Info.., and 1228331 stuff in general/ KNOCKIN
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Prog 101
- From: "Todorovic" <todorovic@home.com>
- Knock sensors
- From: "Geoff Richards" <gerich@one.net.au>
- Re: Knock sensors
- From: Bob Valentine <bob@tecmark.com>
- 7170.ecu help
- From: James P Hunt <war_machine1@juno.com>
- Re: 7170.ecu help
- From: Ludis Langens <ludis@cruzers.com>
- Re: 7170.ecu help
- From: "TK" <terryk@foothill.net>
- How do I do a quick test of a 730
- From: "Eric Aos" <Eric@Prototype-Engineering.com>
- Re: How do I do a quick test of a 730
- From: Andrew Mattei <amattei@mindspring.com>
- Re: How do I do a quick test of a 730
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: How do I do a quick test of a 730
- From: "Eric Aos" <Eric@Prototype-Engineering.com>
- Re: How do I do a quick test of a 730
- From: Shannen Durphey <shannen@grolen.com>
- Re: How do I do a quick test of a 730
- From: "Bruce Plecan" <nacelp@bright.net>
- TGB Adaptation Help?
- From: Rex Weatherford <rex.weatherford@terraglyph.com>
- Re: TGB Adaptation Help?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Squash <realsquash@yahoo.com>
- TB Adaptation Help?
- From: Rex Weatherford <rex.weatherford@terraglyph.com>
- RE: TGB Adaptation Help?
- From: ronald.j.selberg@exgate.tek.com
- Crossfire SES driver & 7747
- From: "Kevin Reynolds" <kereyn@gte.net>
- 7148 -> 7783 table locs
- From: "Patrick G. Moore" <pmoore@cmr.gov>
- Re: 7170.ecu help
- From: James P Hunt <war_machine1@juno.com>
- RE: 7170.ecu help
- From: Carl Summers <InTech@writeme.com>
- TPI Vacuum at idle
- From: gabe <gellett@earthlink.net>
- Re: 7148 -> 7783 table locs
- From: "Bruce Plecan" <nacelp@bright.net>
- 88 quad-4
- From: cwagner@info2000.net
- Re: Crossfire SES driver & 7747
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TGB Adaptation Help?
- From: Shannen Durphey <shannen@grolen.com>
- Bin Needed
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: 88 quad-4
- From: Shannen Durphey <shannen@grolen.com>
- More user friendly, please..
- From: Shannen Durphey <shannen@grolen.com>
- Re: TPI Vacuum at idle
- From: "Craig Moates" <craig.moates@home.com>
- Re: TGB Adaptation Help?
- Re: TPI Vacuum at idle
- Re: 7148 -> 7783 table locs
- RE: TGB Adaptation Help?
- From: ronald.j.selberg@exgate.tek.com
- Re: LT5 Info.., and 1228331 stuff in general.
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: TGB Adaptation Help?
- From: Shannen Durphey <shannen@grolen.com>
- Re: 88 quad-4
- Re: Bin Needed
- From: "TK" <terryk@foothill.net>
- Re: 88 quad-4
- From: cwagner@info2000.net
- Re: 88 quad-4
- From: cwagner@info2000.net
- Re: 88 quad-4
- Re: 88 quad-4
- From: Shannen Durphey <shannen@grolen.com>
- Re: 88 quad-4
- From: Shannen Durphey <shannen@grolen.com>
- Re: 88 quad-4
- From: Shannen Durphey <shannen@grolen.com>
- Re: 88 quad-4
- RE: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
- From: "Michael Adams" <michaeladams1@compuserve.com>
- Re: 88 quad-4
- Sorry for Mis-Post Re: Oil
- From: "Michael Adams" <michaeladams1@compuserve.com>
- Mobil1 vs. Non-Synthetic vs. Red Line?
- From: bearbvd@cmn.net (Greg Hermann)
- Re: 88 quad-4
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
- From: "Craig Moates" <craig.moates@home.com>
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
- Re: 88 quad-4
- From: cwagner@info2000.net
- Re: 88 quad-4
- From: cwagner@info2000.net
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
- From: Shannen Durphey <shannen@grolen.com>
- Re: 88 quad-4
- From: Richard Wakeling <kojab@ar.com.au>
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
- From: "gene l. clifford" <genelc@idworld.net>
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 88 quad-4
- From: Shannen Durphey <shannen@grolen.com>
- Too tired, correction to Re: 88 quad-4
- From: Shannen Durphey <shannen@grolen.com>
- Re: 88 quad-4
- From: cwagner@info2000.net
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
- From: Bob Valentine <bob@tecmark.com>
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
- From: "Dave Zug" <dzug@delanet.com>
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
- From: "C and T" <candt@techcom.net>
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
- From: Mark Romans <romans@pacbell.net>
- Re: 88 quad-4
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: 7747 "shaking" the vechile?!
- From: Mika.Helander@softbit.fi
- Northstar DIS
- From: Scott Knight <scott@scottknight.com>
- Re: 88 quad-4
- Re: TPI Vacuum at idle
- From: frels@rosharon.camco.slb.com (Mike Frels)
- Re: TPI Vacuum at idle
- From: "Bruce & Lisa Wilcox" <wilcoxbl@gte.net>
- Re: TPI Vacuum at idle
- From: gabe <gellett@earthlink.net>
- Re: Disguised scan tool
- From: steve ravet <sravet@arm.com>
- RE: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: 88 quad-4
- From: cwagner@info2000.net
- Re: 88 quad-4
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
- From: Mike Rolica <mrolica@meridian-mag.com>
- Fw: Water injection (tech refs)
- From: "Bruce Plecan" <nacelp@bright.net>
- Greddy air-fuel ratio meter
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Greddy air-fuel ratio meter
- From: "Patrick G. Moore" <pmoore@cmr.gov>
- Re: Greddy air-fuel ratio meter
- From: bearbvd@cmn.net (Greg Hermann)
- Re: Greddy air-fuel ratio meter
- From: bearbvd@cmn.net (Greg Hermann)
- Re: Memcals
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Greddy air-fuel ratio meter
- From: Frank F Parker <fparker@umich.edu>
- Re: 88 quad-4
- From: Richard Wakeling <kojab@ar.com.au>
- 3.1L turbo vin V schematics uploaded
- From: steve ravet <sravet@arm.com>
- new to list and question
- From: "Charles A. Fair" <chuck@italymail.com>
- Re: Greddy air-fuel ratio meter
- From: bearbvd@cmn.net (Greg Hermann)
- RE: 3.1L turbo vin V schematics uploaded
- From: ronald.j.selberg@exgate.tek.com
- Re: 3.1L turbo vin V schematics uploaded
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: 3.1L turbo vin V schematics uploaded
- From: bearbvd@cmn.net (Greg Hermann)
- Re: Memcals
- From: Ludis Langens <ludis@cruzers.com>
- Re: 88 quad-4
- From: Ludis Langens <ludis@cruzers.com>
- Re: 3.1L turbo vin V schematics uploaded
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: 3.1L turbo vin V schematics uploaded
- From: ronald.j.selberg@exgate.tek.com
- Re: Northstar DIS
- RE: Northstar DIS
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- [no subject]
- From: "Mike Rolica" <97005620@lambton.on.ca>
- Re: Northstar DIS
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Disguised scan tool
- From: Shannen Durphey <shannen@grolen.com>
- Re: new to list and question
- From: Shannen Durphey <shannen@grolen.com>
- Re: Northstar DIS
- From: Shannen Durphey <shannen@grolen.com>
- Re: Crossfire SES driver & 7747
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Crossfire SES driver & 7747
- From: "Kevin Reynolds" <kereyn@gte.net>
- Crossfire mod.. plenum volume or enlarged TBIs first?
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: 88 quad-4
- From: "Programmer" <nwester@eidnet.org>
- Re: Northstar DIS
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Crossfire SES driver & 7747
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Crossfire SES driver & 7747
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Greddy air-fuel ratio meter
- From: Carl Summers <InTech@writeme.com>
- Re: Greddy air-fuel ratio meter
- From: "Bruce Plecan" <nacelp@bright.net>
- Anyone have a burner, eraser, or eproms they want to sell?
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: [VN] New Mobil1 vs. Old Mobil1 vs. Non-Synthetic?
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: Greddy air-fuel ratio meter
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 3.1L turbo vin V schematics uploaded
- From: "TK" <terryk@foothill.net>
- Re: 88 quad-4
- From: cwagner@info2000.net
- Re: Greddy air-fuel ratio meter
- From: "C and T" <candt@techcom.net>
- Re: 88 quad-4
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Greddy air-fuel ratio meter
- From: Andrew Mattei <amattei@mindspring.com>
- Re: Greddy air-fuel ratio meter
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Northstar DIS
- Re: Northstar DIS
- Re: Disguised scan tool
- Re: 88 quad-4
- From: cwagner@info2000.net
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Crossfire SES driver & 7747
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Crossfire SES driver & 7747
- From: "Bruce Plecan" <nacelp@bright.net>
- Public Thanks
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Northstar DIS
- From: "Bruce Plecan" <nacelp@bright.net>
- Question from newbie
- Re: Question from newbie
- Re: Question from newbie
- From: "Bruce Plecan" <nacelp@bright.net>
- archives
- From: "Robert W. Hughes" <rwhughe@ev1.net>
- Carputing software
- From: "Programmer" <nwester@eidnet.org>
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: Archives? [was Greddy air-fuel ratio meter]
- From: Rex Weatherford <rex.weatherford@terraglyph.com>
- Quad 4 .bin file
- From: ronald.j.selberg@exgate.tek.com
- RE: Crossfire mod.. plenum volume or enlarged TBIs first?
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: Archives? [was Greddy air-fuel ratio meter]
- From: "Patrick G. Moore" <pmoore@cmr.gov>
- RE: Crossfire mod.. plenum volume or enlarged TBIs first?
- From: Squash <realsquash@yahoo.com>
- Re: Archives? [was Greddy air-fuel ratio meter]
- From: Rex Weatherford <rex.weatherford@terraglyph.com>
- RE: Crossfire mod.. plenum volume or enlarged TBIs first?
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: Crossfire SES driver & 7747
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Archives? [was Greddy air-fuel ratio meter]
- From: bearbvd@cmn.net (Greg Hermann)
- Re: 88 quad-4
- From: "Charles A. Fair" <chuck@italymail.com>
- Re: new to list and question
- From: "Charles A. Fair" <chuck@italymail.com>
- Re: Memcals
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Memcals
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Memcals
- From: Pat Ford <pford@qnx.com>
- EFI332 Archives
- From: "Robert W. Hughes" <rwhughe@ev1.net>
- Re: 88 quad-4
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Quad 4 .bin file
- From: Richard Wakeling <kojab@ar.com.au>
- Re: Memcals
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?
- From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
- Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
- From: Bob Valentine <bob@tecmark.com>
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Crossfire mod.. plenum volume or enlarged TBIs first?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
- From: Richard Wakeling <kojab@ar.com.au>
- Re: 88 quad-4
- From: "Charles A. Fair" <chuck@italymail.com>
- Re: 88 quad-4
- From: Shannen Durphey <shannen@grolen.com>
- Re: 88 quad-4
- From: "Charles A. Fair" <chuck@italymail.com>
- Re: Carputing software
- From: "Programmer" <nwester@eidnet.org>
- Re: Memcals
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Greddy air-fuel ratio meter
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: More user friendly, please..
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- newbie question
- From: "John LeBlanc" <jleblanc@malcams.com>
- 1227165 Questions
- Re: 1227165 Questions
- Re: 1227165 Questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1227165 Questions
- Re: 1227165 Questions
- From: gabe <gellett@spam.net>
- Re: 1227165 Questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1227165 Questions
- From: Roger Heflin <rah@horizon.hit.net>
- Any broken ECM's out there?
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Attn. Richard
- From: ronald.j.selberg@exgate.tek.com
- Re: Any broken ECM's out there?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Any broken ECM's out there?
- Tech 1 Questions
- From: Richard Wakeling <kojab@ar.com.au>
- Lost at CSH, HQ
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Northstar DIS
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
- Re: Lost at CSH, HQ
- From: Ludis Langens <ludis@cruzers.com>
- Re: Northstar DIS
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Northstar DIS
- From: Scott Knight <scott@scottknight.com>
- Re: Lost at CSH, HQ
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
- From: Roger Heflin <rah@horizon.hit.net>
- 727+LT1Conectr.jpg
- From: Shannen Durphey <shannen@grolen.com>
- Re: Northstar DIS
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
- Too hot 7805
- From: "Bruce Plecan" <nacelp@bright.net>
- Adapting GM ECM to Chrysler Turbo
- From: Thomas McCabe <mccabet@mediaone.net>
- Re: Adapting GM ECM to Chrysler Turbo
- Confuzin signals
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Confuzin signals
- From: Mika.Helander@softbit.fi
- RE: Too hot 7805
- From: Mika.Helander@softbit.fi
- Re: Too hot 7805
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Too hot 7805
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Too hot 7805
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- RE: Too hot 7805
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- RE: Too hot 7805
- From: Don.F.Broadus@ucm.com
- RE: Lost at CSH, HQ
- From: Don.F.Broadus@ucm.com
- Re: Too hot 7805
- From: Barry Tisdale <btisdale@cybersol.com>
- RE: Too hot 7805
- From: "Sam Stratton" <transamsam@hotmail.com>
- Re: Too hot 7805
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: Too hot 7805
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: Adapting GM ECM to Chrysler Turbo
- From: "Programmer" <nwester@eidnet.org>
- IAC Orifice Data
- From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
- From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
- Re: Too hot 7805
- From: Ludis Langens <ludis@cruzers.com>
- Re: 88 quad-4
- From: Ludis Langens <ludis@cruzers.com>
- Oil Filters
- From: "Dave Zug." <dzug@delanet.com>
- Dribbles, and drabbles yes EFI
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Dribbles, and drabbles yes EFI
- From: Ward <WSpoonemore@excite.com>
- Re: Dribbles, and drabbles yes EFI
- From: Squash <realsquash@yahoo.com>
- Re: Dribbles, and drabbles yes EFI
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Dribbles, and drabbles yes EFI
- From: "Bruce Plecan" <nacelp@bright.net>
- High Freq MAF Problem
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Dribbles, and drabbles yes EFI
- From: rr <RRauscher@nni.com>
- Re: Tech 1 Questions
- From: "Geoff Richards" <gerich@one.net.au>
- Re: Where to get 1-2 fuel injectors (Ford SVO 30lb equivalents)
- From: Shannen Durphey <shannen@grolen.com>
- Re: Too hot 7805
- From: Bill Shaw <bshaw@connix.com>
- Re: Dribbles, and drabbles yes EFI
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: High Freq MAF Problem
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: Adapting GM ECM to Chrysler Turbo
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: Adapting GM ECM to Chrysler Turbo
- From: Thomas McCabe <mccabet@mediaone.net>
- Re: Too hot 7805
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Adapting GM ECM to Chrysler Turbo
- From: "Programmer" <nwester@eidnet.org>
- Re: High Freq MAF Problem
- From: Ludis Langens <ludis@cruzers.com>
- Re: Dribbles, and drabbles yes EFI
- From: Squash <realsquash@yahoo.com>
- Dribbles, and drabbles yes EFI
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: High Freq MAF Problem
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Dribbles, and drabbles yes EFI
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: High Freq MAF Problem
- From: Scot Sealander <Sealand@clarityconnect.com>
- V-Maf Differences for Part #s
- From: "Dave Zug." <dzug@delanet.com>
- Re: V-Maf Differences for Part #s
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Memcals
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: Too hot 7805
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Memcals
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Dribbles, and drabbles yes EFI
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: Memcals
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: Memcals
- From: "Bruce Plecan" <nacelp@bright.net>
- DIS ????
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Memcals
- From: "Swayze" <kswayze@bellsouth.net>
- Re: High Freq MAF Problem
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIS ????
- Re: more.. DIS ????
- From: Shannen Durphey <shannen@grolen.com>
- Re: Adapting GM ECM to Chrysler Turbo
- From: Thomas McCabe <mccabet@mediaone.net>
- Re: V-Maf Differences for Part #s
- From: "Dave Zug" <dzug@delanet.com>
- Re: V-Maf Differences for Part #s
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: V-Maf Differences for Part #s
- From: Gabe <gellett@earthlink.net>
- Re: DIS ????
- Re: V-Maf Differences for Part #s
- From: "Dave Zug" <dzug@delanet.com>
- Re: Dribbles, and drabbles yes EFI
- From: "Dave Zug" <dzug@delanet.com>
- Re: Dribbles, and drabbles yes EFI
- From: "Bruce Plecan" <nacelp@bright.net>
- EFI - Terminology and acronyms
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- New Member here
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: New Member here
- From: "nacelp" <nacelp@bright.net>
- Re: New Member here
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: V-Maf Differences for Part #s
- From: "Dave Zug" <dzug@delanet.com>
- Re: V-Maf Differences for Part #s
- From: Mark Romans <romans@pacbell.net>
- Re: New Member here
- From: "nacelp" <nacelp@bright.net>
- Re: EFI - Terminology and acronyms
- From: "nacelp" <nacelp@bright.net>
- Re: New Member here
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: New Member here
- From: "nacelp" <nacelp@bright.net>
- Questions about chips
- Re: V-Maf Differences for Part #s
- From: "Dave Zug." <dzug@delanet.com>
- Re: Greddy air-fuel ratio meter, really ALDL messages
- From: Dave Hempstead <dave_hempstead@agilent.com>
- Re: DIS ????
- From: Pat Ford <pford@qnx.com>
- Re: 2 bar map sensor
- From: steve ravet <sravet@arm.com>
- Re: EFI - Terminology and acronyms
- From: steve ravet <sravet@arm.com>
- New Member, LT1 Questions
- From: Dave Plummer <davepl@MICROSOFT.com>
- Re: New Member, LT1 Questions
- Re: New Maf, a thought
- From: "Peter Fenske" <Peter_Fenske@bcit.ca>
- Re: 7170.ecu help
- From: James P Hunt <war_machine1@juno.com>
- MAF to MAP (speed density)
- From: "Programmer" <nwester@eidnet.org>
- Greetings from a "new" member
- From: Dig <turbodig@usa.net>
- Re: DIY-EFI.ORG (was re: 2 bar map sensor)
- From: Shannen Durphey <shannen@grolen.com>
- Re: New Member, LT1 Questions
- From: "Dave Zug" <dzug@delanet.com>
- Re: Greetings from a "new" member
- From: "Dave Zug" <dzug@delanet.com>
- Re: New Member, LT1 Questions
- From: Glen Beard <gbeard1@nycap.rr.com>
- DIS-- Some Success
- From: "nacelp" <nacelp@bright.net>
- Re: New Member, LT1 Questions
- From: "Dave Plummer" <davepl@MICROSOFT.com>
- Re: Greetings from a "new" member
- From: "nacelp" <nacelp@bright.net>
- Re: Greetings from a "new" member
- Re: New Member, LT1 Questions
- From: "Peter Fenske" <Peter_Fenske@bcit.ca>
- RE: DIS ????
- From: "Igor" <brease@public.kharkov.ua>
- Re: Adapting GM ECM to Chrysler Turbo
- From: "Programmer" <nwester@eidnet.org>
- Archives
- From: "Programmer" <nwester@eidnet.org>
- Re: New Member, LT1 Questions
- From: Ken Kelly <kenkelly@lucent.com>
- Greetings from a "new" member
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: DIS ????
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Auto learn code-Where?
- From: "Jeff M" <tystorm@email.msn.com>
- Re: When asking ecm questions
- From: "Jeff M" <tystorm@email.msn.com>
- Injector sizes?
- From: Rex Weatherford <rex.weatherford@terraglyph.com>
- Re: Greetings from a "new" member
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Auto learn code-Where?
- From: Roger Heflin <rah@horizon.hit.net>
- Re: DIS ????
- From: "nacelp" <nacelp@bright.net>
- Re: Archives
- From: "nacelp" <nacelp@bright.net>
- Recommended books for burning???
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Greetings from a "new" member
- From: "nacelp" <nacelp@bright.net>
- Re: Auto learn code-Where?
- From: "Jeff M" <tystorm@email.msn.com>
- Wide band o2
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Injector sizes?
- From: Bob Valentine <bob@tecmark.com>
- Fw: LT1 with boost.
- From: "nacelp" <nacelp@bright.net>
- RE: Recommended books for burning???
- From: Dave Plummer <davepl@MICROSOFT.com>
- RE: LT1 with boost.
- From: Dave Plummer <davepl@MICROSOFT.com>
- Re: Wide band o2
- From: Frank F Parker <fparker@umich.edu>
- Re: Wide band o2
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: Wide band o2
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: Archives
- From: "Programmer" <nwester@eidnet.org>
- Re: Auto learn code-Where?
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: LT1 with boost.
- From: "Dave Zug" <dzug@delanet.com>
- Re: Tuning, was High Freq MAF Problem
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Archives
- From: "nacelp" <nacelp@bright.net>
- Re: Injector sizes?
- From: "Walter Sherwin" <wsherwin@idirect.com>
- test, delete please
- From: kgil1@tampabay.rr.com
- Re: Maf to Map again
- From: "Peter Fenske" <Peter_Fenske@bcit.ca>
- Re: [Re: Greetings from a "new" member]
- From: Dig <turbodig@usa.net>
- Re: Maf to Map again
- From: "nacelp" <nacelp@bright.net>
- Newbie questions and intro.
- From: Keith <kgil1@tampabay.rr.com>
- Re: Maf to Map again
- Re: Maf to Map again
- Can anybody Identify these Components
- From: Richard Wakeling <kojab@ar.com.au>
- Re: Maf to Map again
- From: Shannen Durphey <shannen@grolen.com>
- Re: DIY-EFI.ORG (was re: 2 bar map sensor)
- From: steve ravet <sravet@arm.com>
- Re: Auto learn code-Where?
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: Auto learn code-Where?
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: Maf to Map again
- From: Ludis Langens <ludis@cruzers.com>
- Re: Recommended books for burning???
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: Maf to Map again
- RE: Can anybody Identify these Components
- From: Don.F.Broadus@ucm.com
- Re: Maf to Map again
- From: "Programmer" <nwester@eidnet.org>
- EPROM Burner (Modular Circuit Technology, MOD-MEP-1C) F.S.
- From: Keith <kgil1@tampabay.rr.com>
- Re: Maf to Map again
- From: Ludis Langens <ludis@cruzers.com>
- Re: EFI - Terminology and acronyms
- From: gabe <gellett@earthlink.net>
- Re: Maf to Map again
- From: Rick Lindstedt <rick@mafb.org>
- Re: Maf to Map again
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: Maf to Map again
- From: Rick Lindstedt <rick@mafb.org>
- Re: Wide band o2
- From: "Jeff M" <tystorm@email.msn.com>
- Using 28F256 in a 747 instead of 2732A??????????
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Using 28F256 in a 747 instead of 2732A??????????
- From: Squash <realsquash@yahoo.com>
- Re: Maf to Map again
- From: "nacelp" <nacelp@bright.net>
- Re: Maf to Map again
- From: "nacelp" <nacelp@bright.net>
- Crossfire injectors.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Crossfire injectors.
- From: "nacelp" <nacelp@bright.net>
- Re: Crossfire injectors.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Delta ?
- From: "Geoff Richards" <gerich@one.net.au>
- Re: Using 28F256 in a 747 instead of 2732A??????????
- From: Shawn Lin <slin01@mail.orion.org>
- Re: Delta ?
- From: Marc Randolph <mrand@pobox.com>
- Audible knock detectors
- From: Dave Plummer <davepl@MICROSOFT.com>
- Re: Using 28F256 in a 747 instead of 2732A??????????
- From: "nacelp" <nacelp@bright.net>
- Re: Audible knock detectors
- From: "nacelp" <nacelp@bright.net>
- Re: Using 28F256 in a 747 instead of 2732A??????????
- From: Shawn Lin <slin01@mail.orion.org>
- Re: Audible knock detectors
- From: "C. Brooks" <cbrooks1@tqci.net>
- Re: Using 28F256 in a 747 instead of 2732A??????????
- From: Richard Wakeling <kojab@ar.com.au>
- Re: Maf to Map again
- From: Shannen Durphey <shannen@grolen.com>
- Big Injectors
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: Using 28F256 in a 747 instead of 2732A??????????
- From: "nacelp" <nacelp@bright.net>
- RE: Audible knock detectors
- From: Dave Plummer <davepl@MICROSOFT.com>
- Re: Using 28F256 in a 747 instead of 2732A??????????
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: Adapting GM ECM to Chrysler Turbo
- From: Thomas McCabe <mccabet@mediaone.net>
- Re: Wide band o2
- From: Frank F Parker <fparker@umich.edu>
- Re: Audible knock detectors
- From: "C. Brooks" <cbrooks1@tqci.net>
- Re: Audible knock detectors
- From: Mike Wesley <mwesley@mediaone.net>
- MAF and Calculated VE
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Using 28F256 in a 747 instead of 2732A??????????
- From: Richard Wakeling <kojab@ar.com.au>
- Re: Big Injectors
- Re: Audible knock detectors
- From: "C and T" <candt@techcom.net>
- Re: Big Injectors
- From: Shannen Durphey <shannen@grolen.com>
- Re: Maf to Map again
- From: "Programmer" <nwester@eidnet.org>
- Re: Adapting GM ECM to Chrysler Turbo
- From: "Programmer" <nwester@eidnet.org>
- Re: Delta ?
- Re: Big Injectors
- From: "nacelp" <nacelp@bright.net>
- Re: Delta ?
- From: "Dave Zug" <dzug@delanet.com>
- Re: MAF and Calculated VE
- From: "nacelp" <nacelp@bright.net>
- Re: Delta ?
- From: "Dave Zug" <dzug@delanet.com>
- 2732As any recommended speed or brand?
- From: "Kevin Reynolds" <kereyn@gte.net>
- RE: Delta ?
- From: "Geoff Richards" <gerich@one.net.au>
- Re: Using 28F256 in a 747 instead of 2732A??????????
- From: Bob Valentine <bob@tecmark.com>
- RE: Using 28F256 in a 747 instead of 2732A??????????
- From: Mika.Helander@softbit.fi
- Application for ASMJ Broadcast code
- From: "James Wilson" <Wilson.James4@worldnet.att.net>
- Re: Using 28F256 in a 747 instead of 2732A??????????
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: Using 28F256 in a 747 instead of 2732A??????????
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: Using 28F256 in a 747 instead of 2732A??????????
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: 2732As any recommended speed or brand?
- Re: 2732As any recommended speed or brand?
- Re: Crossfire injectors.
- From: Nico Over <nicomax@erols.com>
- Re: 2732As any recommended speed or brand?
- Re: 2732As any recommended speed or brand?
- Re: 2732As any recommended speed or brand?
- From: "nacelp" <nacelp@bright.net>
- Re: Delta ?
- From: Scott Knight <scott@scottknight.com>
- Re: Application for ASMJ Broadcast code
- From: "nacelp" <nacelp@bright.net>
- Re: New Member, LT1 Questions
- RE: Crossfire injectors.
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: New Member, LT1 Questions
- From: "nacelp" <nacelp@bright.net>
- Re: Crossfire injectors.
- From: Nico Over <nicomax@erols.com>
- Re: [Re: Using 28F256 in a 747 instead of 2732A??????????]
- From: Dig <turbodig@usa.net>
- GM training manuals
- From: steve ravet <sravet@arm.com>
- Re: New Member, LT1 Questions/50-55 ponders
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Crossfire injectors.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Using 28F256 in a 747 instead of 2732A??????????
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: Application for ASMJ Broadcast code
- From: "James Wilson" <Wilson.James4@worldnet.att.net>
- Re: Application for ASMJ Broadcast code
- From: Ludis Langens <ludis@cruzers.com>
- Re: [Re: Using 28F256 in a 747 instead of 2732A??????????]
- From: Ludis Langens <ludis@cruzers.com>
- For DIG, no EFI
- From: "nacelp" <nacelp@bright.net>
- RE: Crossfire injectors.
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: Crossfire injectors.
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: Application for ASMJ Broadcast code
- From: "Programmer" <nwester@eidnet.org>
- Re: 2732As any recommended speed or brand?
- From: "Programmer" <nwester@eidnet.org>
- Re: 2732As any recommended speed or brand?
- From: "Programmer" <nwester@eidnet.org>
- Re: Crossfire injectors.
- From: "nacelp" <nacelp@bright.net>
- RE: 2 bar map sensor
- From: "Michael Adams" <michaeladams1@compuserve.com>
- Hyp 87 Vette chip EBAY
- From: "Dave Zug" <dzug@delanet.com>
- Re: 2 bar map sensor
- From: "nacelp" <nacelp@bright.net>
- Re: MAF and Calculated VE
- From: Scot Sealander <Sealand@clarityconnect.com>
- Ignition timing question
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: [Re: [Re: Using 28F256 in a 747 instead of 2732A??????????]]
- From: Dig <turbodig@usa.net>
- '165 ACWS
- From: Bob Valentine <bob@tecmark.com>
- RE: 2 bar map sensor
- From: "Michael Adams" <michaeladams1@compuserve.com>
- Re: Ignition timing question
- From: "nacelp" <nacelp@bright.net>
- Re: '165 ACWS
- From: "nacelp" <nacelp@bright.net>
- GM training manuals
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 2 bar map sensor
- RE: 2 bar map sensor
- From: John_Calabrese@ENGELHARD.COM
- RE: 2 bar map sensor
- From: Squash <realsquash@yahoo.com>
- Re: 2 bar map sensor
- From: Rex Weatherford <rex.weatherford@terraglyph.com>
- Re: 2 bar map sensor
- From: steve ravet <sravet@arm.com>
- EPROM -> NVRAM, ALDL mode-11
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: Ignition timing question
- From: "Jeff M" <tystorm@email.msn.com>
- syclone bin
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- RE: 2 bar map sensor
- From: John_Calabrese@ENGELHARD.COM
- Re: 2 bar map sensor
- From: John_Calabrese@ENGELHARD.COM
- Timing, revisited....
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: E85 Trucks
- From: Rex Weatherford <rex.weatherford@terraglyph.com>
- Re: Audible knock detectors
- From: "Jeff M" <tystorm@email.msn.com>
- Re: 2 bar map sensor
- From: Mark Romans <romans@pacbell.net>
- Re: [syclone bin]
- From: Dig <turbodig@usa.net>
- Re: Application for ASMJ Broadcast code
- From: Ludis Langens <ludis@cruzers.com>
- Re: [Re: [Re: Using 28F256 in a 747 instead of 2732A??????????]]
- From: Ludis Langens <ludis@cruzers.com>
- Re: Crossfire injectors.
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- Rev Limiter
- From: Squash <realsquash@yahoo.com>
- Re: Timing, revisited....
- From: "nacelp" <nacelp@bright.net>
- Re: [syclone bin]
- From: steve ravet <sravet@arm.com>
- Re: Crossfire injectors.
- From: "nacelp" <nacelp@bright.net>
- Performance Parts
- From: Carl Summers <InTech@writeme.com>
- Re: Crossfire injectors.
- From: John_Calabrese@ENGELHARD.COM
- Re: Rev Limiter
- From: John_Calabrese@ENGELHARD.COM
- Re: Application for ASMJ Broadcast code
- From: "Programmer" <nwester@eidnet.org>
- Re: Crossfire injectors.
- From: "nacelp" <nacelp@bright.net>
- Re: [Re: [syclone bin]]
- From: Dig <turbodig@usa.net>
- Re: Performance Parts
- From: "Jason Bonie" <jabonie@hotmail.com>
- Re: MAF and Calculated VE
- From: "Walter Sherwin" <wsherwin@idirect.com>
- RE: Rev Limiter
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: MAF and Calculated VE
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: 2 bar map sensor
- RE: Performance Parts
- From: Carl Summers <InTech@writeme.com>
- '165 to '730
- From: Davis <davis@mail.eecis.udel.edu>
- Re: '165 to '730
- From: Davis <davis@mail.eecis.udel.edu>
- Re: '165 to '730
- From: "Dave Zug" <dzug@delanet.com>
- injectors --- > liquidation
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: Timing, revisited....
- From: "Jeff M" <tystorm@email.msn.com>
- Re: '165 to '730
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: '165 to '730
- From: "Todd Osterbrink" <toddo@dwave.net>
- Re: '165 to '730
- From: "nacelp" <nacelp@bright.net>
- rats! vats!
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Does anyone have an ALD file for a 730?
- From: "Eric Aos" <Eric@Prototype-Engineering.com>
- VATS elimination
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: Does anyone have an ALD file for a 730?
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: Crossfire injectors.
- From: Shannen Durphey <shannen@grolen.com>
- Re: VATS elimination
- From: "James Wilson" <Wilson.James4@worldnet.att.net>
- Re: injectors --- > liquidation
- From: Shannen Durphey <shannen@grolen.com>
- RE: Does anyone have an ALD file for a 730?
- From: "Eric Aos" <Eric@Prototype-Engineering.com>
- Re: rats! vats!
- From: PCMdoc <PCMdoc@surfree.com>
- Re: '165 to '730
- From: "Dave Zug" <dzug@delanet.com>
- Re: '165 to '730
- From: "Programmer" <nwester@eidnet.org>
- Re: Crossfire injectors.
- From: "Programmer" <nwester@eidnet.org>
- xfire injectors now gas tanks
- From: "nacelp" <nacelp@bright.net>
- Tools that work
- From: "nacelp" <nacelp@bright.net>
- Reading/Study Material EFI
- From: "nacelp" <nacelp@bright.net>
- Re: Crossfire injectors.
- From: Barry Tisdale <btisdale@cybersol.com>
- EFI (NC) and tool selection
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- harness special
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: Tools that work
- From: "C. Brooks" <cbrooks1@tqci.net>
- Re: harness special
- From: "nacelp" <nacelp@bright.net>
- LO3 TBI Total timing advance, how much?
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Tools that work
- From: "nacelp" <nacelp@bright.net>
- Re: EFI (NC) and tool selection
- From: "nacelp" <nacelp@bright.net>
- Re: LO3 TBI Total timing advance, how much?
- From: "nacelp" <nacelp@bright.net>
- Re: LO3 TBI Total timing advance, how much?
- From: olbap <olbap@mail.mia.bellsouth.net>
- TBI injector flow vs pressure and demand
- From: olbap <olbap@mail.mia.bellsouth.net>
- DP Ram Emulator...
- From: "Eric Aos" <Eric@Prototype-Engineering.com>
- WTB '730 & MEMCAL. Was '165 to '730
- From: Davis <davis@mail.eecis.udel.edu>
- Re: LO3 TBI Total timing advance, how much?
- From: "nacelp" <nacelp@bright.net>
- Re: Reading/Study Material EFI
- From: kgil1@tampabay.rr.com
- Re: WTB '730 & MEMCAL. Was '165 to '730
- From: "nacelp" <nacelp@bright.net>
- Re: xfire injectors now gas tanks
- From: "Programmer" <nwester@eidnet.org>
- Weather proofing electronics.
- From: "Kevin Reynolds" <kereyn@gte.net>
- How to identify eprom
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: How to identify eprom
- From: "nacelp" <nacelp@bright.net>
- Re: rats! vats!
- From: "nacelp" <nacelp@bright.net>
- Re: harness special
- GM ZZ4 chip ?
- From: "C and T" <candt@techcom.net>
- Re: How to identify eprom
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: Does anyone have an ALD file for a 730?
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- Re: GM ZZ4 chip ?
- From: "nacelp" <nacelp@bright.net>
- Re: the GN [no EFI]
- From: "Dave Zug" <dzug@delanet.com>
- Re: the GN [no EFI]
- From: "nacelp" <nacelp@bright.net>
- RE: the GN [no EFI]
- From: "the Fredericks" <fredericksk@worldnet.att.net>
- Re: xfire injectors now gas tanks
- 727,730,injectors
- From: "Swayze" <kswayze@bellsouth.net>
- Re: the GN [no EFI]
- Re: Reading/Study Material EFI
- From: Squash <realsquash@yahoo.com>
- Re: How to identify eprom
- X-Ram Crossfire intake
- Re: How to identify eprom
- From: "nacelp" <nacelp@bright.net>
- Re: 727,730,injectors Injector drivers
- From: "nacelp" <nacelp@bright.net>
- Re: X-Ram Crossfire intake
- From: "nacelp" <nacelp@bright.net>
- GM ECM transplant or fuel enrichment
- From: Jon Watts <jonwatts@yahoo.com>
- Re: DP Ram Emulator...
- Re: GM ECM transplant or fuel enrichment
- From: "nacelp" <nacelp@bright.net>
- To the HC11 Number Gurus
- From: Andrew Wakeling <kojab@ar.com.au>
- Group purchase of harness- was Re: harness special
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: How to identify eprom
- From: "nacelp" <nacelp@bright.net>
- Re: GM ECM transplant or fuel enrichment
- From: Jon Watts <jonwatts@yahoo.com>
- Re: GM ECM transplant or fuel enrichment
- From: Ludis Langens <ludis@cruzers.com>
- Re: Group purchase of harness- was Re: harness special
- From: Ludis Langens <ludis@cruzers.com>
- Re: DP Ram Emulator...
- From: Ludis Langens <ludis@cruzers.com>
- Re: To the HC11 Number Gurus
- From: Ludis Langens <ludis@cruzers.com>
- Re: 727,730,injectors Injector drivers
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Group purchase of harness- was Re: harness special
- From: Shannen Durphey <shannen@grolen.com>
- RE: Group purchase of harness- was Re: harness special
- From: Carl Summers <InTech@writeme.com>
- Re: Group purchase of harness- was Re: harness special
- From: Nico Over <nicomax@erols.com>
- RE: Weather proofing electronics.
- From: Carl Summers <InTech@writeme.com>
- Re: Tools that work
- RE: X-Ram Crossfire intake
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: injectors --- > liquidation
- Re: Crossfire injectors.
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- Re: Crossfire injectors.
- From: Steve Ciciora <ciciora@edison.chisp.net>
- LM3914???
- From: John_Calabrese@ENGELHARD.COM
- Re: LM3914???
- From: clive@problem.org (Clive Apps - 510-0020 )
- RE: LM3914???
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: LM3914???
- From: John_Calabrese@ENGELHARD.COM
- Re: Crossfire injectors.
- From: Squash <realsquash@yahoo.com>
- RE: LM3914???
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- Re: Group purchase of harness- was Re: harness special
- From: Mark Romans <romans@pacbell.net>
- RE: LM3914???
- From: Ernst denBroeder <edenbroe@cisco.com>
- LM3914 jameco part #
- From: John_Calabrese@ENGELHARD.COM
- RE: LM3914???
- From: John_Calabrese@ENGELHARD.COM
- Re: the GN [no EFI]
- From: DC Smith <morepoweral@tetranet.net>
- RE: MAF and Calculated VE
- From: Dave Plummer <davepl@MICROSOFT.com>
- Re: Crossfire injectors.
- From: Bob Valentine <bob@tecmark.com>
- Re: Crossfire injectors.
- From: Ken Kelly <kenkelly@lucent.com>
- Re: Crossfire injectors.
- From: "Programmer" <nwester@eidnet.org>
- Re: Crossfire injectors.
- From: "Programmer" <nwester@eidnet.org>
- Re: the GN [no EFI]
- From: "Dave Zug." <dzug@delanet.com>
- Re: GM ECM transplant or fuel enrichment
- From: Ward <WSpoonemore@excite.com>
- Re: GM ECM transplant or fuel enrichment
- From: Jon Watts <jonwatts@yahoo.com>
- Re: Group purchase of wiring harness
- From: Don Asetta <dasetta@kitfox.anv.net>
- 88 TBI issue
- From: Eric Deslauriers <edeslaur@us.oracle.com>
- Re: [Re: [syclone bin]]
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: Group purchase of wiring harness
- From: "Russ Harms" <global.geolab@memlane.com>
- Disassembler info: (was Syclone bin)
- From: Dig <turbodig@usa.net>
- RE: DP Ram Emulator...
- From: "Eric Aos" <Eric@Prototype-Engineering.com>
- '727/'730 v-8 .bin EGR
- From: "Swayze" <kswayze@bellsouth.net>
- Re: 88 TBI issue
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: the GN [no EFI]
- From: DC Smith <morepoweral@tetranet.net>
- Fuel Pump (was [Re: Crossfire injectors.])
- From: Dig <turbodig@usa.net>
- '727 connectors prev:Re: How to identify eprom
- From: "Swayze" <kswayze@bellsouth.net>
- Re: welding tanks - was Crossfire injectors.
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: DP Ram Emulator...
- From: steve ravet <sravet@arm.com>
- RE: 88 TBI issue
- From: Carl Summers <InTech@writeme.com>
- Re: Crossfire injectors.
- From: Squash <realsquash@yahoo.com>
- Re: Fuel Pump (was [Re: Crossfire injectors.])
- From: Shannen Durphey <shannen@grolen.com>
- RE: DP Ram Emulator...
- From: "Eric Aos" <Eric@Prototype-Engineering.com>
- RE: DP Ram Emulator...
- From: "Eric Aos" <Eric@Prototype-Engineering.com>
- Re: Group purchase of harness- was Re: harness special
- From: Bob Valentine <bob@tecmark.com>
- RE: LM3914???
- From: Bob Valentine <bob@tecmark.com>
- Re: LM3914???
- From: clive@problem.org (Clive Apps - 510-0020 )
- Re: RE: LM3914???
- Re: RE: LM3914???
- Re: DP Ram Emulator...
- From: Ludis Langens <ludis@cruzers.com>
- Re: '727/'730 v-8 .bin EGR
- From: Ludis Langens <ludis@cruzers.com>
- Re: Fuel Pump (was [Re: Crossfire injectors.])
- From: Rex Weatherford <rex.weatherford@terraglyph.com>
- RE: LM3914???
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- Re: the GN [no EFI]
- From: "Dave Zug." <dzug@delanet.com>
- Re: the GN [no EFI]
- From: "Dave Zug." <dzug@delanet.com>
- RE: DP Ram Emulator...
- From: Eric Aos <EOA@spartek.com>
- Re: the GN [no EFI]
- From: Keith <kgil1@tampabay.rr.com>
- Re: RE: LM3914???
- Re: the GN [no EFI]
- From: "Dave Zug." <dzug@delanet.com>
- Guidance:I am a beginer !!
- From: VAIDYA AJAY ASHOK <aavaidya@me.iitb.ernet.in>
- Re: the GN [no EFI]
- From: "Dave Zug." <dzug@delanet.com>
- RE: GM ECM transplant or fuel enrichment
- From: Mike rolica <97005620@lambton.on.ca>
- Re: the GN [no EFI]
- From: "Patrick G. Moore" <pmoore@cmr.gov>
- Re: Group purchase of harness- was Re: harness special
- From: "David" <David@gardener.com>
- Re: 88 TBI issue
- From: Eric Deslauriers <edeslaur@us.oracle.com>
- Re: DP Ram Emulator...
- From: Ludis Langens <ludis@cruzers.com>
- Re: Guidance:I am a beginer !!
- From: Swayze <kswayze@bellsouth.net>
- Re: the GN [no EFI]
- From: "John D. Bachman" <jdbachman@redrose.net>
- Re: the GN [no EFI]
- From: "Dave Zug" <dzug@delanet.com>
- RE:Re: Guidance:I am a beginer !!
- From: "Swayze" <kswayze@bellsouth.net>
- RE: Crossfire injectors.
- From: Carl Summers <InTech@writeme.com>
- ecm bench
- Re: Group purchase of harness- was Re: harness special
- From: "David" <David@gardener.com>
- Re: ecm bench
- From: Shannen Durphey <shannen@grolen.com>
- Re: Group purchase of harness- was Re: harness special
- Re: rats! vats!
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Group purchase of harness fizzled
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: Group purchase of harness- was Re: harness special
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: 88 TBI issue
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: Group purchase of harness- was Re: harness special
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: rats! vats!
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Group purchase of harness fizzled
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Odp: LM3914???
- From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
- RE: Group purchase of harness fizzled
- From: "J. T. Spilman" <jtstexas@home.com>
- Re: GM training manuals
- From: "Swayze" <kswayze@bellsouth.net>
- ald file for a '165
- From: "John D. Bachman" <jdbachman@redrose.net>
- Re: ecm bench
- From: PCMdoc <PCMdoc@surfree.com>
- Re: rats! vats!
- From: PCMdoc <PCMdoc@surfree.com>
- O2 sensor/tailpipe adapter?
- From: "Ken Kelly" <ken73@houston.rr.com>
- RE: Group purchase of harness fizzled
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- Re: O2 sensor/tailpipe adapter?
- From: gabe <gellett@earthlink.net>
- Need help on 87 GM Buick GN ESC pin-out...
- From: "Iestyn Guest" <iguest@viewlogic.com>
- Re: Need help on 87 GM Buick GN ESC pin-out...
- RE: O2 sensor/tailpipe adapter?
- From: "Ken Kelly" <ken73@houston.rr.com>
- Anyone notice Grumpy has been MIA..??
- Re: Anyone notice Grumpy has been MIA..??
- From: Steve Ciciora <ciciora@edison.chisp.net>
- Re: O2 sensor/tailpipe adapter?
- From: gabe <gellett@earthlink.net>
- How do you get chips out of the darn holder??
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: GM training manuals
- From: steve ravet <sravet@arm.com>
- RE: Need help on 87 GM Buick GN ESC pin-out...
- From: Don.F.Broadus@ucm.com
- Re: ecm bench
- From: Ward <WSpoonemore@excite.com>
- Re: rats! vats!
- From: Ward <WSpoonemore@excite.com>
- RE: How do you get chips out of the darn holder??
- From: Carl Summers <InTech@writeme.com>
- Re: Need help on 87 GM Buick GN ESC pin-out...
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: How do you get chips out of the darn holder??
- Thanks very much (Was: Need help on 87 GM Buick GN ESC pin-out.)
- From: "Iestyn Guest" <iguest@viewlogic.com>
- Re: O2 sensor/tailpipe adapter?
- From: Bob Valentine <bob@tecmark.com>
- Re: O2 sensor/tailpipe adapter?
- From: "Jason Bonie" <jabonie@hotmail.com>
- RE: GM training manuals
- From: "Geoff Richards" <gerich@one.net.au>
- Re: O2 sensor/tailpipe adapter?
- From: Jared Tschetter <jtschetter@vermeermfg.com>
- Re: O2 sensor/tailpipe adapter?
- From: Shannen Durphey <shannen@grolen.com>
- interesting site
- From: Swayze <kswayze@bellsouth.net>
- Re: ecm bench
- From: Jennifer Green & Scott Peitzsch <jlg-sep@mediaone.net>
- someone is selling Diacom compatible cables
- V8 '165 harness modifications
- From: Ernst denBroeder <edenbroe@cisco.com>
- RE: V8 '165 harness modifications
- From: Mike rolica <97005620@lambton.on.ca>
- Re: V8 '165 harness modifications
- From: Gabe <gellett@earthlink.net>
- Re: Crossfire injectors.
- From: "Fran and Bud" <quest100@gte.net>
- Test only
- Re: Group purchase of harness fizzled
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- tbi:454 vs. 350
- From: cwagner@info2000.net
- Heated O2 sensors
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: rats! vats!
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: Heated O2 sensors
- From: "Dave Zug." <dzug@delanet.com>
- Re: rats! vats!
- From: "Dave Zug." <dzug@delanet.com>
- Re: V8 '165 harness modifications
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: rats! vats!
- From: "Jeff M" <tystorm@email.msn.com>
- Re: rats! vats!
- From: "Programmer" <nwester@eidnet.org>
- Re: V8 '165 harness modifications
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: V8 '165 harness modifications
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: V8 '165 harness modifications
- From: gabe <gellett@earthlink.net>
- Re: V8 '165 harness modifications
- From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
- Re: rats! vats!
- From: Ken Kelly <kenkelly@lucent.com>
- Re: V8 '165 harness modifications
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: rats! vats!
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: was rats! vats! now nostalgia
- From: "Programmer" <nwester@eidnet.org>
- Re: nostalgia
- From: "Dave Zug" <dzug@delanet.com>
- Re: Fuel Pump
- From: Terry <thartman@fastlane.net>
- RE: nostalgia
- From: "Eric Aos" <Eric@Prototype-Engineering.com>
- Re: rats! vats!
- From: Shannen Durphey <shannen@grolen.com>
- Re: Fuel Pump
- Re: rats! vats!
- From: "Programmer" <nwester@eidnet.org>
- Re: rats! vats!
- From: PCMdoc <PCMdoc@surfree.com>
- Re: V8 '165 harness modifications
- From: Shannen Durphey <shannen@grolen.com>
- Re: V8 '165 harness modifications
- From: Eric Deslauriers <edeslaur@us.oracle.com>
- Re: nostalgia
- From: Shannen Durphey <shannen@grolen.com>
- Diacom: Is anyones selling theirs?
- From: Eric Deslauriers <edeslaur@us.oracle.com>
- Re: Diacom: Is anyones selling theirs?
- From: Shannen Durphey <shannen@grolen.com>
- Nostalgia
- From: "Jeff M" <tystorm@email.msn.com>
- Re: V8 '165 harness modifications
- From: "Jeff M" <tystorm@email.msn.com>
- Re: V8 '165 harness modifications
- From: Mark Romans <romans@pacbell.net>
- Re: nostalgia
- From: William Brennan <STDBoy@worldnet.att.net>
- Re: nostalgia
- From: "Fran and Bud" <quest100@gte.net>
- Re: nostalgia
- From: Frederic Breitwieser <frederic@xephic.dynip.com>
- Re: nostalgia
- From: "Sam Stratton" <transamsam@hotmail.com>
- Re: nostalgia
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: nostalgia
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: nostalgia
- Re: V8 '165 harness modifications
- Conversion table
- From: "Ramsey Foster" <ramsey_foster@mensor.com>
- RE: V8 '165 harness modifications
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: nostalgia
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- Re: V8 '165 harness modifications
- RE: V8 '165 harness modifications
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: nostalgia
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: nostalgia
- From: Mike Veldman <vmike@email.ceat.okstate.edu>
- Re: nostalgia
- From: "Programmer" <nwester@eidnet.org>
- Re: Conversion table
- From: "Programmer" <nwester@eidnet.org>
- RE: nostalgia
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- IAC motors
- From: "Ken Kelly" <ken73@houston.rr.com>
- Conversion table
- From: "Ramsey Foster" <ramsey_foster@mensor.com>
- Re: Conversion table
- From: "Walter Sherwin" <wsherwin@idirect.com>
- EPROM BCC decode
- From: Michael Davis <davis@mail.eecis.udel.edu>
- RE: Conversion table
- From: "Ramsey Foster" <ramsey_foster@mensor.com>
- Re: V8 '165 harness modifications
- From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
- Re: Conversion table
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: V8 '165 harness modifications
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: IAC motors
- From: gabe <gellett@earthlink.net>
- Re: IAC motors
- From: Swayze <kswayze@bellsouth.net>
- Re: nostalgia
- From: Brent Obermiller <ober_b@sssnet.com>
- RE: someone is selling Diacom compatible cables
- From: Dave Plummer <davepl@MICROSOFT.com>
- RE: someone is selling Diacom compatible cables
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- Please Ignore my previous plea Re: EPROM BCC decode
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Re: IAC motors
- From: steve ravet <sravet@arm.com>
- RE: someone is selling Diacom compatible cables
- From: Bob Valentine <bob@tecmark.com>
- Diacom problems on Thinkpads (Was Re: 88 TBI issue)
- From: "K. Wong" <brougham1@home.com>
- PE mode questions.
- From: "Kevin Reynolds" <kereyn@gte.net>
- programming specs for N821s181
- From: "Kevin Reynolds" <kereyn@gte.net>
- RE: someone is selling Diacom compatible cables
- From: Eric Clark <eclark@hoser.com>
- Re: IAC motors
- From: Shannen Durphey <shannen@grolen.com>
- Re: IAC motors
- From: rr <RRauscher@nni.com>
- Re: V8 '165 harness modifications
- From: Shannen Durphey <shannen@grolen.com>
- RE: programming specs for N821s181
- From: Carl Summers <InTech@writeme.com>
- Re: someone is selling Diacom compatible cables
- From: "David" <David@gardener.com>
- Re: someone is selling Diacom compatible cables
- From: Frederic Breitwieser <frederic@xephic.dynip.com>
- Re: Diacom problems on Thinkpads (Was Re: 88 TBI issue)
- From: Squash <realsquash@yahoo.com>
- Need help with spark map's in 747.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: IAC motors
- From: Ludis Langens <ludis@cruzers.com>
- Re: programming specs for N821s181
- From: Ludis Langens <ludis@cruzers.com>
- Re: rats! vats!
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: PE mode questions.
- From: Ward <WSpoonemore@excite.com>
- Re: '727/'730 v-8 .bin EGR
- From: "nacelp" <nacelp@bright.net>
- Re: programming specs for N821s181
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- RE: programming specs for N821s181
- From: "K. Wong" <brougham1@home.com>
- mail delivery
- From: Marc Piccioni <piccioni@cadvision.com>
- PING
- From: Swayze <kswayze@bellsouth.net>
- 747 aldl
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: '727/'730 v-8 .bin EGR
- From: Swayze <kswayze@bellsouth.net>
- 7747 Aldl Communication
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Nother ALDL grabbing method
- From: "Dave Zug" <dzug@delanet.com>
- ALDL (8192) command timing (sort of longish)
- From: Dig <turbodig@yahoo.com>
- OH - PS:
- From: "Dave Zug" <dzug@delanet.com>
- [ADMIN] Server troubles.
- From: "Jon V." <jon@valesh.com>
- Re: Diacom problems on Thinkpads (Was Re: 88 TBI issue)
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: someone is selling Diacom compatible cables
- From: "Dave Zug" <dzug@delanet.com>
- AKFM 2174 bin
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: Diacom problems on Thinkpads (Was Re: 88 TBI issue)
- From: Roger Heflin <rah@horizon.hit.net>
- Re: ecm bench
- From: "nacelp" <nacelp@bright.net>
- Site Down?
- From: "nacelp" <nacelp@bright.net>
- Site Down?
- From: "nacelp" <nacelp@bright.net>
- Need help with PE mode questions.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: programming specs for N821s181
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: 747 aldl
- From: "nacelp" <nacelp@bright.net>
- Re: someone is selling Diacom compatible cables
- From: "Dave Plummer" <davepl@MICROSOFT.com>
- Speedometer Scaling
- From: "Dave Plummer" <davepl@MICROSOFT.com>
- Re: Need help with PE mode questions.
- Re: someone is selling Diacom compatible cables
- From: gabe <gellett@earthlink.net>
- Re: Nostalgia
- From: Dig <turbodig@yahoo.com>
- [ADMIN] When it rains...
- From: "Jon V." <jon@valesh.com>
- Re: Nother ALDL grabbing method
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: ALDL (8192) command timing (sort of longish)
- From: steve ravet <sravet@arm.com>
- [no subject]
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- [no subject]
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- Re: nostalgia
- From: Bill Shaw <bshaw@connix.com>
- XDEs
- From: "nacelp" <nacelp@bright.net>
- Re: Nother ALDL grabbing method
- Re: Site Down?
- From: "David" <David@gardener.com>
- Re: Diacom problems on Thinkpads (Was Re: 88 TBI issue)
- From: "Craig Moates" <craig.moates@home.com>
- Re: Nother ALDL grabbing method
- From: "David" <David@gardener.com>
- Revised QBasic ALDL program for 165 with MAX232 on incoming
- From: "Craig Moates" <craig.moates@home.com>
- Re: AKFM 2174 bin
- From: "Programmer" <nwester@eidnet.org>
- Re: Need help with PE mode questions.
- From: rr <RRauscher@nni.com>
- Re: Need help with spark map's in 747.
- From: rr <RRauscher@nni.com>
- Thinkpad 755C for sale
- From: "Craig Moates" <craig.moates@home.com>
- Revised QBasic ALDL program for 165 with MAX232 on incoming
- From: "Craig Moates" <craig.moates@home.com>
- Re: [ADMIN] When it rains...
- From: Steve Gorkowski <kb4mxo@mwt.net>
- Re: nostalgia
- From: Mike Turner <miketurner@ieee.org>
- Re: Need help with spark map's in 747.
- From: steve ravet <sravet@arm.com>
- Cheap Programmers\Erasers
- O2 Sensors - Output Graphs?
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: O2 Sensors - Output Graphs?
- From: clive@problem.org (Clive Apps - 510-0020 )
- Re: O2 Sensors - Output Graphs?
- Re: [ADMIN] Server troubles.
- From: "Jon V." <jon@valesh.com>
- Re: O2 Sensors - Output Graphs?
- From: Steve Ciciora <ciciora@edison.chisp.net>
- RE: Thinkpad 755C for sale
- From: jacobss@greatoaks.com
- RE: Newbie question
- From: jacobss@greatoaks.com
- Speedometer Scaling
- From: "Dave Plummer" <davepl@MICROSOFT.com>
- RE: O2 Sensors - Output Graphs?
- From: "Ken Kelly" <ken73@houston.rr.com>
- Emulator boards
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Nother ALDL grabbing method
- From: "Dave Zug." <dzug@delanet.com>
- RE: Nother ALDL grabbing method
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Nother ALDL grabbing method
- From: "Jason Bonie" <jabonie@hotmail.com>
- Re: Emulator boards
- From: Marc Randolph <mrand@pobox.com>
- RE: Nother ALDL grabbing method
- From: "Ken Kelly" <ken73@houston.rr.com>
- Re: Nother ALDL grabbing method
- From: "Dave Zug." <dzug@delanet.com>
- Re: Nother ALDL grabbing method
- From: "nacelp" <nacelp@bright.net>
- Re: Nother ALDL grabbing method
- From: "nacelp" <nacelp@bright.net>
- Re: Need help with spark map's in 747.
- From: rr <RRauscher@nni.com>
- Re: Thinkpad 755C for sale
- From: "Craig Moates" <craig.moates@home.com>
- Re: GMECM Digest V2 #71
- From: Dig <turbodig@yahoo.com>
- RE: O2 Sensors - Output Graphs?
- From: Bob Valentine <bob@tecmark.com>
- Re: GMECM Digest V2 #71
- From: steve ravet <sravet@arm.com>
- Re: Nother ALDL grabbing method
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: IAC motors
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: someone is selling Diacom compatible cables
- Re: Nother ALDL grabbing method
- From: "Dave Zug." <dzug@delanet.com>
- RE: Universal Fuel Injection Two Bolt
- From: "Jeff M" <tystorm@email.msn.com>
- knock sensor readout
- From: John_Calabrese@ENGELHARD.COM
- Re: knock sensor readout
- From: Ken Kelly <kenkelly@lucent.com>
- Re: knock sensor readout
- From: "nacelp" <nacelp@bright.net>
- Re: knock sensor readout
- From: "nacelp" <nacelp@bright.net>
- Re: AKFM 2174 bin
- From: Ernst denBroeder <edenbroe@cisco.com>
- knock sensor/solid cam
- From: "Jeffrey Scott" <jws6367@mailcity.com>
- Re: knock sensor/solid cam
- From: "nacelp" <nacelp@bright.net>
- Building PCB's
- From: Marc Randolph <mrand@pobox.com>
- SLP Harness
- From: Squash <realsquash@yahoo.com>
- Re: knock sensor/solid cam
- From: "Jeffrey Scott" <jws6367@mailcity.com>
- Re: knock sensor/solid cam
- From: Eric Deslauriers <edeslaur@us.oracle.com>
- Re: knock sensor/solid cam
- From: "nacelp" <nacelp@bright.net>
- RE: knock sensor/solid cam
- From: Mike rolica <97005620@lambton.on.ca>
- Re: knock sensor/solid cam
- From: Eric Clark <eclark@hoser.com>
- Re: AKFM 2174 bin
- From: "Programmer" <nwester@eidnet.org>
- Justa test ignore
- From: "nacelp" <nacelp@bright.net>
- RE: knock sensor/solid cam
- From: Ernst denBroeder <edenbroe@cisco.com>
- Still looking for bins
- From: "nacelp" <nacelp@bright.net>
- Re: XDE Documents
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Newbie
- Re: Newbie
- From: "nacelp" <nacelp@bright.net>
- more nother ALDL
- From: "Dave Zug" <dzug@delanet.com>
- RE: knock sensor/solid cam
- From: "mike mager" <mikemager@hotmail.com>
- Debugger board for P4 ECMs
- From: Ludis Langens <ludis@cruzers.com>
- RE: knock sensor/solid cam
- From: Ernst denBroeder <edenbroe@cisco.com>
- RE: knock sensor/solid cam
- From: "Jim Sloan" <leroy@sunflower.com>
- P4 Cylinder Select
- From: Ludis Langens <ludis@cruzers.com>
- Re: Debugger board for P4 ECMs
- From: steve ravet <sravet@arm.com>
- Re: P4 Cylinder Select Thanks
- From: "nacelp" <nacelp@bright.net>
- RE: Debugger board for P4 ECMs
- From: "Bartz, Jamison" <Jamison.Bartz@COMPAQ.com>
- RE: knock sensor/solid cam
- From: "mike mager" <mikemager@hotmail.com>
- Are my posts making it? was Speedometer Scaling
- From: Dave Plummer <davepl@MICROSOFT.com>
- Re: Debugger board for P4 ECMs
- From: "Peter Fenske" <Peter_Fenske@bcit.ca>
- Re: Are my posts making it? was Speedometer Scaling
- From: "nacelp" <nacelp@bright.net>
- MAP data...was Re: 48 +1 and sensor data
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: Are my posts making it? was Speedometer Scaling
- From: "Peter Fenske" <Peter_Fenske@bcit.ca>
- Re: Are my posts making it? was Speedometer Scaling
- From: "Dave Zug." <dzug@delanet.com>
- Re: AKFM 2174 bin
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: Debugger board for P4 ECMs
- From: Richard Wakeling <kojab@zxmail.com>
- Re: AKFM 2174 bin
- From: "nacelp" <nacelp@bright.net>
- Re: Debugger board for P4 ECMs
- From: Steve Ciciora <ciciora@edison.chisp.net>
- Re: AKFM 2174 bin
- From: Ernst denBroeder <edenbroe@cisco.com>
- RE: Debugger board for P4 ECMs
- From: "Matt Tomlins" <mattpw@ozemail.com.au>
- RE:debugger board for P4 ECMs
- From: mswayze@truswood.com (Mike Swayze)
- Re: Debugger board for P4 ECMs
- From: "nacelp" <nacelp@bright.net>
- Re: AKFM 2174 bin
- From: "nacelp" <nacelp@bright.net>
- Re: Are my posts making it? was Speedometer Scaling
- From: Mark Romans <romans@pacbell.net>
- Desensitizing GM knock sensors
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: Desensitizing GM knock sensors
- From: Shannen Durphey <shannen@grolen.com>
- Re: knock sensor/solid cam
- From: Ludis Langens <ludis@cruzers.com>
- Re: Desensitizing GM knock sensors
- From: "nacelp" <nacelp@bright.net>
- Re: Debugger board for P4 ECMs
- From: Ludis Langens <ludis@cruzers.com>
- Re: Debugger board for P4 ECMs
- From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
- Re: Debugger board for P4 ECMs
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Debugger board for P4 ECMs
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Desensitizing GM knock sensors
- Re: MAP data...was Re: 48 +1 and sensor data
- Re: Desensitizing GM knock sensors
- Re: Debugger board for P4 ECMs
- From: steve ravet <sravet@arm.com>
- Re: Desensitizing GM knock sensors
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Desensitizing GM knock sensors
- From: Roger Heflin <rah@horizon.hit.net>
- RE: Desensitizing GM knock sensors
- From: Dave Plummer <davepl@MICROSOFT.com>
- RE: Desensitizing GM knock sensors
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Desensitizing GM knock sensors
- From: "nacelp" <nacelp@bright.net>
- Fuel prices / efficiency
- From: "Dave Zug." <dzug@delanet.com>
- Re: Fuel prices / efficiency
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Fuel prices / efficiency
- From: "nacelp" <nacelp@bright.net>
- Re: P4 Cylinder Select
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Fuel prices / efficiency
- Re: Fuel prices / efficiency
- From: Aaron Willis <darkmonahue@awwwsome.com>
- Re: Desensitizing GM knock sensors
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: Fuel prices / efficiency
- From: "nacelp" <nacelp@bright.net>
- Re: Fuel prices / efficiency
- From: Daniel Ciobota <dciobota@hiwaay.net>
- Re: Desensitizing GM knock sensors
- From: "nacelp" <nacelp@bright.net>
- Re: Debugger board for P4 ECMs
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: GMECM Digest V2 #78
- From: Jody Shapiro <jshapiro@netgate.net>
- Re: MAP data...was Re: 48 +1 and sensor data
- From: Ludis Langens <ludis@cruzers.com>
- Re: P4 Cylinder Select
- From: Ludis Langens <ludis@cruzers.com>
- RE: Debugger board for P4 ECMs
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: Desensitizing GM knock sensors
- From: Shannen Durphey <shannen@grolen.com>
- Re: Debugger board for P4 ECMs
- From: Ludis Langens <ludis@cruzers.com>
- Re: Debugger board for P4 ECMs
- From: "Swayze" <kswayze@bellsouth.net>
- Data I/O 29B device programmer for sale
- From: steve ravet <sravet@arm.com>
- Re: Desensitizing GM knock sensors
- From: Mark Romans <romans@pacbell.net>
- RE: Data I/O 29B device programmer for sale
- From: Carl Summers <InTech@writeme.com>
- don't read, just a test.
- From: "Kevin Reynolds" <kereyn@gte.net>
- RE: don't read, just a test.
- From: Carl Summers <InTech@writeme.com>
- 2.0/2.2/2.5 DIS pinouts
- From: Shannen Durphey <shannen@grolen.com>
- Now Emulator was ---->RE: Debugger board for P4 ECMs
- From: "Eric Aos" <Eric@Prototype-Engineering.com>
- Turbo bin uploaded to incoming
- From: Ludis Langens <ludis@cruzers.com>
- Re: Turbo bin uploaded to incoming
- Re: Turbo bin uploaded to incoming
- From: Richard Wakeling <kojab@zxmail.com>
- Re: Turbo bin uploaded to incoming
- From: Ludis Langens <ludis@cruzers.com>
- Re: Data I/O 29B device programmer for sale
- From: steve ravet <sravet@arm.com>
- Re: Turbo bin uploaded to incoming
- From: steve ravet <sravet@arm.com>
- LT1 boost retard??
- From: Shannen Durphey <shannen@grolen.com>
- Re: Turbo bin uploaded to incoming
- From: Richard Wakeling <kojab@zxmail.com>
- Help with stupid question.
- From: "Kevin Reynolds" <kereyn@gte.net>
- H*lp with stupid question.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Debugger board for P4 ECMs
- From: Ludis Langens <ludis@cruzers.com>
- 1227748 schematic updated
- From: Ludis Langens <ludis@cruzers.com>
- Re: Australia based GM .ecu files
- From: "Daniel N" <gmecu@hotmail.com>
- Re: LT1 boost retard??
- From: PCMdoc <PCMdoc@surfree.com>
- Re: LT1 boost retard??
- From: Roger Heflin <rah@horizon.hit.net>
- [no subject]
- From: "DAVID THOMAS" <dave@vramp.net>
- Re: Now Emulator was ---->RE: Debugger board for P4 ECMs
- From: mswayze@truswood.com (Mike Swayze)
- Re: Help with stupid question.
- From: Ward <WSpoonemore@excite.com>
- Re: 1227748 schematic updated
- From: steve ravet <sravet@arm.com>
- Re: 1227748 schematic updated
- Re: 1227748 schematic updated
- From: Ludis Langens <ludis@cruzers.com>
- Re: 1227748 schematic updated
- From: steve ravet <sravet@arm.com>
- Re: 1227748 schematic updated
- From: "nacelp" <nacelp@bright.net>
- cheap eprom burner group purchase
- From: Bob Valentine <bob@tecmark.com>
- Re: cheap eprom burner group purchase
- From: Keith <kgil1@tampabay.rr.com>
- Selling 68HC11 stuff
- Re: cheap eprom burner group purchase
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Dummy guestion
- From: "nacelp" <nacelp@bright.net>
- Re: Dummy guestion
- From: Ken Kelly <kenkelly@lucent.com>
- Re: Dummy guestion
- From: "Programmer" <nwester@eidnet.org>
- 2-bar MAP snensor
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: Just a question, how bout?
- From: "Jeff M" <tystorm@email.msn.com>
- Re: MAP data...was Re: 48 +1 and sensor data
- From: "Dave Zug." <dzug@delanet.com>
- Re: MAP data...was Re: 48 +1 and sensor data
- From: John_Calabrese@ENGELHARD.COM
- h*lp maps question
- From: "Paul Smith" <pauls@mania.com.au>
- Re: 2-bar MAP snensor
- From: "Walter Sherwin" <wsherwin@idirect.com>
- BPW numbers
- From: "Programmer" <nwester@eidnet.org>
- Any Dead MAFs ?
- From: Davis <davis@mail.eecis.udel.edu>
- Re: Selling 68HC11 stuff
- Re: 1227748 schematic updated
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: BPW numbers
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Selling 68HC11 stuff
- Re: BPW numbers
- From: "Dave Zug" <dzug@delanet.com>
- Re: Australia based GM .ecu files
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Turbo bin uploaded to incoming
- From: Ludis Langens <ludis@cruzers.com>
- Re: BPW numbers
- From: "Programmer" <nwester@eidnet.org>
- Re: Any Dead MAFs ?
- From: John B <jdbachman@redrose.net>
- 93 F-Body M6 BIN
- From: Eric Clark <eclark@hoser.com>
- Re: BPW numbers
- From: "Programmer" <nwester@eidnet.org>
- Re: BPW numbers
- From: "Dave Zug" <dzug@delanet.com>
- Re: BPW numbers
- From: "Dave Zug." <dzug@delanet.com>
- Selectable chips & boost programming
- From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
- Re: BPW numbers
- From: "Programmer" <nwester@eidnet.org>
- Re: BPW numbers
- From: "Programmer" <nwester@eidnet.org>
- Re: Selectable chips & boost programming
- From: David Cooley <n5xmt@bellsouth.net>
- RE: h*lp maps question
- From: Dig <turbodig@yahoo.com>
- cjkw1922_AUST.BIN
- From: "Sutcliffe, Peter" <Peter.Sutcliffe@corpmail.telstra.com.au>
- RE: Fuel prices / efficiency
- From: Mika.Helander@softbit.fi
- Motorola S code to binary conversion program/utility
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- ABS-OFF TOPIC-OFFLIST
- From: mswayze@truswood.com (Mike Swayze)
- Re: Selectable chips & boost programming
- From: "Programmer" <nwester@eidnet.org>
- Re: Selectable chips & boost programming
- From: David Cooley <n5xmt@bellsouth.net>
- Mysterious rogue connector
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Mysterious rogue connector
- From: Rick Lindstedt <rick@mafb.org>
- Re: Fuel prices / efficiency
- Re: Selectable chips & boost programming
- From: "Programmer" <nwester@eidnet.org>
- Re: Selectable chips & boost programming
- From: Keith <kgil1@tampabay.rr.com>
- RE: Mysterious rogue connector
- From: Don.F.Broadus@ucm.com
- Re: Mysterious rogue connector
- Speedometer
- From: cwagner@info2000.net
- Re: Selectable chips & boost programming
- From: cwagner@info2000.net
- Re: Fuel prices / efficiency
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: cjkw1922_AUST.BIN
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Selectable chips & boost programming
- From: "nacelp" <nacelp@bright.net>
- Analog Cadillac/Bendix to'730
- From: Russ Harms <global.geolab@memlane.com>
- Re: Selectable chips & boost programming
- From: "Frank" <repair@frontiernet.net>
- Newbie to list
- Re: Mysterious rogue connector
- From: Shannen Durphey <shannen@grolen.com>
- Re: Selectable chips & boost programming
- From: "Dave Zug" <dzug@delanet.com>
- Re: Newbie to list
- From: "Dave Zug" <dzug@delanet.com>
- Re: Speedometer - transparent first-surface reflector needed!
- From: "mike mager" <mikemager@hotmail.com>
- Re: Mysterious rogue connector
- From: "Dave Zug" <dzug@delanet.com>
- Re: Selectable chips & boost programming
- From: "Programmer" <nwester@eidnet.org>
- Re: Speedometer - transparent first-surface reflector needed!
- From: "Dave Zug" <dzug@delanet.com>
- Re: Analog Cadillac/Bendix to'730
- From: Bob Valentine <bob@tecmark.com>
- Re: h*lp maps question
- From: "Paul Smith" <pauls@mania.com.au>
- RE: Speedometer - transparent first-surface reflector needed!
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Speedometer - transparent first-surface reflector needed!
- From: Ernst denBroeder <ernst@willers.employees.org>
- Re: Analog Cadillac/Bendix to'730
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Speedometer - transparent first-surface reflector needed!
- From: "C. Brooks" <cbrooks1@tqci.net>
- re:speedo-heads up disply was: speedometer-transparent first surface reflector needed
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Selectable chips & boost programming
- From: "Programmer" <nwester@eidnet.org>
- re:speedo-heads up disply was: speedometer-transparent first surface reflector needed
- From: cwagner@info2000.net
- Re: Selectable chips & boost programming
- From: David Cooley <n5xmt@bellsouth.net>
- Re: re:speedo-heads up disply was: speedometer-transparent first surface reflector needed
- From: "Frank" <repair@frontiernet.net>
- Troublesome Eprom
- From: Shannen Durphey <shannen@grolen.com>
- Re: Troublesome Eprom
- Re: Troublesome Eprom
- From: "nacelp" <nacelp@bright.net>
- Re: Troublesome Eprom
- From: Shannen Durphey <shannen@grolen.com>
- Re: Troublesome Eprom
- From: Mark Romans <romans@pacbell.net>
- re:speedo-heads up disply was: speedometer-transparent first surface reflector needed
- From: "Daniel N" <gmecu@hotmail.com>
- Re: speedo-heads up disply was: speedometer-transparent first surface reflector needed
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- MEMCAL swap '88 to '89 (identical cars)
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Odp: ABS-OFF TOPIC-OFFLIST
- From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
- Re: MEMCAL swap '88 to '89 (identical cars)
- From: "nacelp" <nacelp@bright.net>
- Re: Troublesome Eprom
- From: Ludis Langens <ludis@cruzers.com>
- Re: Selectable chips & boost programming
- From: Ludis Langens <ludis@cruzers.com>
- Re: Analog Cadillac/Bendix to'730
- From: Ludis Langens <ludis@cruzers.com>
- eprom carriers
- From: "NickG" <nikog@mediaone.net>
- re:MEMCALs was:Re: Analog Cadillac/Bendix to'730
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Troublesome Eprom
- From: "Programmer" <nwester@eidnet.org>
- lost 27 emails
- From: "Programmer" <nwester@eidnet.org>
- Re: re:MEMCALs was:Re: Analog Cadillac/Bendix to'730
- From: "nacelp" <nacelp@bright.net>
- Re: eprom carriers
- From: "nacelp" <nacelp@bright.net>
- Re: eprom carriers
- From: Jay Carter <JayC@RebelRednecks.Com>
- Re: eprom carriers
- From: Ward <WSpoonemore@excite.com>
- Re: eprom carriers
- From: "nacelp" <nacelp@bright.net>
- Re: Debugger board for P4 ECMs
- From: "Swayze" <kswayze@bellsouth.net>
- Re: re:MEMCALs
- From: "Swayze" <kswayze@bellsouth.net>
- Re: eprom carriers
- From: "Programmer" <nwester@eidnet.org>
- Re: Selectable chips & boost programming
- Re: eprom carriers
- From: "NickG" <nikog@mediaone.net>
- need corvette bin file
- From: "NickG" <nikog@mediaone.net>
- Re: need corvette bin file
- From: Shannen Durphey <shannen@grolen.com>
- Re: Using 28F256 ...
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- reprogramming MAF xfer function in '165 ECM
- From: "NickG" <nikog@mediaone.net>
- Re: reprogramming MAF xfer function in '165 ECM
- From: Mark Romans <romans@pacbell.net>
- LS1 Pinouts
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Troublesome Eprom
- From: Shannen Durphey <shannen@grolen.com>
- New files on FTP site
- From: Shannen Durphey <shannen@grolen.com>
- Motorola chip and more
- From: Carl Summers <InTech@writeme.com>
- fast chip
- From: Pat Ford <pford@qnx.com>
- Schematic proofreader needed
- From: Ludis Langens <ludis@cruzers.com>
- RE: Mysterious rogue connector
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Debugger board for P4 ECMs
- From: Ludis Langens <ludis@cruzers.com>
- curious about sfi
- From: mswayze@truswood.com (Mike Swayze)
- Re: Debugger board for P4 ECMs
- From: "Swayze" <kswayze@bellsouth.net>
- Re: LS1 Pinouts
- From: John_Calabrese@ENGELHARD.COM
- Re: curious about sfi
- From: "nacelp" <nacelp@bright.net>
- Re: Troublesome Eprom
- From: "Programmer" <nwester@eidnet.org>
- Re: Selectable chips & boost programming
- From: "Programmer" <nwester@eidnet.org>
- Re: Selectable chips & boost programming
- From: David Cooley <n5xmt@bellsouth.net>
- Re: curious about sfi
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Selectable chips & boost programming
- From: David Cooley <n5xmt@bellsouth.net>
- Re: fast chip
- From: "93 Formula" <red93formula@hotmail.com>
- Re: Selectable chips & boost programming
- From: "Programmer" <nwester@eidnet.org>
- Re: fast chip
- From: "Programmer" <nwester@eidnet.org>
- 305-350CAM
- From: "Programmer" <nwester@eidnet.org>
- Re: Selectable chips & boost programming (thanks)
- From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
- Re: fast chip
- From: Shannen Durphey <shannen@grolen.com>
- Lt1 Optispark
- From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
- Re: 305-350CAM
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Lt1 Optispark
- From: "nacelp" <nacelp@bright.net>
- Re: Lt1 Optispark
- From: Ward <wspoonemore@excite.com>
- Re: Selectable chips & boost programming (thanks)
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: Turbo bin uploaded to incoming
- From: Richard Wakeling <kojab@ar.com.au>
- Re: Lt1 Optispark
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: Lt1 Optispark
- From: "Swayze" <kswayze@bellsouth.net>
- Re: 305-350CAM
- From: "Programmer" <nwester@eidnet.org>
- Re: reprogramming MAF xfer function in '165 ECM
- From: Mike Rolica <97005620@lambton.on.ca>
- Re: Selectable chips & boost programming
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Selectable chips & boost programming
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Selectable chips & boost programming
- From: Shannen Durphey <shannen@grolen.com>
- Re: Lt1 Optispark
- From: "nacelp" <nacelp@bright.net>
- RE: Selectable chips & boost programming
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Flow Chart
- From: "nacelp" <nacelp@bright.net>
- Re: Lt1 Optispark
- From: "nacelp" <nacelp@bright.net>
- RE: Selectable chips & boost programming
- From: Roger Heflin <rah@horizon.hit.net>
- RE: Lt1 Optispark
- From: Don.F.Broadus@ucm.com
- Re: 2-bar MAP snensor
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: Selectable chips & boost programming
- From: Ludis Langens <ludis@cruzers.com>
- Re: 2-bar MAP snensor
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: Lt1 Optispark
- From: Scott Knight <scott@scottknight.com>
- ALDL Communications
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: ALDL Communications
- Re: Speedometer - transparent first-surface reflector needed!
- From: "mike mager" <mikemager@hotmail.com>
- 6in1 EPROM
- From: David Cooley <n5xmt@bellsouth.net>
- Re: 6in1 EPROM
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- '727('730) sfi was:Re: curious about sfi
- From: mswayze@truswood.com (Mike Swayze)
- Re: 2-bar MAP sensor
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: 6in1 EPROM
- From: David Cooley <n5xmt@bellsouth.net>
- DIS again--sensor interface
- From: mswayze@truswood.com (Mike Swayze)
- New .bins on ftp site
- From: Shannen Durphey <shannen@grolen.com>
- fastchips
- From: Pat Ford <pford@qnx.com>
- Rom Changers
- From: Christian Hack <christianh@edmi.com.au>
- Re: Turbo bin uploaded to incoming
- From: Ludis Langens <ludis@cruzers.com>
- Re: Debugger board for P4 ECMs
- From: Ludis Langens <ludis@cruzers.com>
- Re: curious about sfi
- From: Ludis Langens <ludis@cruzers.com>
- Frederic Breitwieser is famous!! (noefi)
- From: John_Calabrese@ENGELHARD.COM
- RE: Frederic Breitwieser is famous!! (noefi)
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- RE: Conversion table
- From: "Ramsey Foster" <ramsey_foster@mensor.com>
- Re: Debugger board for P4 ECMs
- From: "Swayze" <kswayze@bellsouth.net>
- Re: curious about sfi
- From: "Swayze" <kswayze@bellsouth.net>
- RE: Conversion table
- From: Mike rolica <97005620@lambton.on.ca>
- Re: fast chip
- From: "93 Formula" <red93formula@hotmail.com>
- To NOP, or not to NOP...
- From: Shannen Durphey <shannen@grolen.com>
- Re: To NOP, or not to NOP...
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Debugger board for P4 ECMs
- From: Ludis Langens <ludis@cruzers.com>
- Re: To NOP, or not to NOP...
- From: rr <RRauscher@nni.com>
- Plug reading
- From: David Cooley <n5xmt@bellsouth.net>
- Flow rates on injectors 2.8 & 3.1 engines
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- 1227730/1227749 Schematic
- From: Ludis Langens <ludis@cruzers.com>
- VR Sensors
- From: Bill Shaw <bshaw@connix.com>
- algrippocode.zip
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Flow rates on injectors 2.8 & 3.1 engines
- From: Ward <WSpoonemore@excite.com>
- Re: Flow rates on injectors 2.8 & 3.1 engines
- From: "Swayze" <kswayze@bellsouth.net>
- 2 bar axxc bin for '7730
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: Plug reading
- From: "Programmer" <nwester@eidnet.org>
- Re: Plug reading
- From: David Cooley <n5xmt@bellsouth.net>
- List member virus alert
- From: "Mike Pitts" <mpitts@emi.net>
- Re: Plug reading
- From: "nacelp" <nacelp@bright.net>
- Re: Plug reading
- From: "Programmer" <nwester@eidnet.org>
- Re: Plug reading
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Plug reading
- From: David Cooley <n5xmt@bellsouth.net>
- Fw: Dummy at CSH, HQ
- From: "nacelp" <nacelp@bright.net>
- Re: Fw: Dummy at CSH, HQ
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Fw: Dummy at CSH, HQ
- From: "Mike (Perth, WA)" <erazmus@wantree.com.au>
- 305 to 350
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Need some injector info
- From: Carl Summers <InTech@writeme.com>
- Re: 305 to 350
- Re: Fw: Dummy at CSH, HQ
- From: Shannen Durphey <shannen@grolen.com>
- Re: 305 to 350
- From: "Programmer" <nwester@eidnet.org>
- Re: Plug reading
- From: "Programmer" <nwester@eidnet.org>
- Re: 305 to 350
- From: "Programmer" <nwester@eidnet.org>
- .Bin needed
- From: Shannen Durphey <shannen@grolen.com>
- Re: 305 to 350
- From: Shannen Durphey <shannen@grolen.com>
- Re: 305 to 350
- From: Shannen Durphey <shannen@grolen.com>
- #INTRO: New List Member
- From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
- RE: Fw: Dummy at CSH, HQ
- From: Mike Rolica <mrolica@meridian-mag.com>
- Fwd: *ALERT* Worm Virus Spreading thru Buick community
- injector flow (links and question)
- From: mswayze@truswood.com (Mike Swayze)
- Re: Plug reading
- From: David Cooley <n5xmt@bellsouth.net>
- Re: injector flow (links and question)
- From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
- Re: injector flow (links and question)
- From: "Swayze" <kswayze@bellsouth.net>
- GM Powertrain
- From: 303print <303print@northrim.net>
- Re: injector flow (links and question)
- From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
- Re: injector flow (links and question)
- From: "Swayze" <kswayze@bellsouth.net>
- Re: GM Powertrain
- From: "nacelp" <nacelp@bright.net>
- Re: #INTRO: New List Member
- From: Ludis Langens <ludis@cruzers.com>
- Lotus carlton ECU?
- From: Dave Evans <dave@gsicarlton.demon.co.uk>
- Re: Plug reading
- From: "Programmer" <nwester@eidnet.org>
- Re: #INTRO: New List Member
- Re: Lotus carlton ECU?
- Re: Lotus carlton ECU?
- From: "nacelp" <nacelp@bright.net>
- Re: injector flow (links and question)
- From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
- Re: GM Powertrain
- From: Shannen Durphey <shannen@grolen.com>
- Re: GM Powertrain
- From: ron harris <harris1@execpc.com>
- VATS
- From: Keith Lund <keithl@redrocksw.com>
- Re: VATS
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Administrivia
- Re: VATS
- From: "nacelp" <nacelp@bright.net>
- Re: VATS
- From: Shannen Durphey <shannen@grolen.com>
- Signal generator for ecm bench
- From: Scott Knight <scott@scottknight.com>
- RE: VATS
- From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
- RE: Signal generator for ecm bench
- From: Don.F.Broadus@ucm.com
- AWWH and AWUP
- From: "Dr.Acacio" <aortiz@w3ti.com.br>
- 89 F-body ECU file = 89 Y-body ECU file?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: AWWH and AWUP
- From: "nacelp" <nacelp@bright.net>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: "nacelp" <nacelp@bright.net>
- 4L60E Trans controller
- From: "gene l. clifford" <genelc@idworld.net>
- ALDL via the sound card
- From: Steve Ciciora <ciciora@edison.chisp.net>
- Big cams are better
- From: joe boucher <gmefigearhead@juno.com>
- Re: 4L60E Trans controller
- From: Ward <WSpoonemore@excite.com>
- RE: 4L60E Trans controller
- From: Scott Parkhurst <ScottP@mcmullenargus.com>
- RE: 89 F-body ECU file = 89 Y-body ECU file?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Idle richness with 7747.
- From: "Kevin Reynolds" <kereyn@gte.net>
- RN Carriers for 2732A EPROMS
- From: Craig Marcho <craigmarcho@rocketmail.com>
- Re: Idle richness with 7747.
- From: "nacelp" <nacelp@bright.net>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: "nacelp" <nacelp@bright.net>
- O2 voltage on Diacom
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: O2 voltage on Diacom
- From: Roger Heflin <rah@horizon.hit.net>
- RE: 89 F-body ECU file = 89 Y-body ECU file?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: O2 voltage on Diacom
- From: "nacelp" <nacelp@bright.net>
- Re: 4L60E Trans controller
- From: "nacelp" <nacelp@bright.net>
- Re: 4L60E Trans controller
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Signal generator for ecm bench
- From: Ken Kelly <kenkelly@lucent.com>
- Re: 4L60E Trans controller
- From: "nacelp" <nacelp@bright.net>
- Re: 4L60E Trans controller/Ward
- From: "gene l. clifford" <genelc@idworld.net>
- Re: Big cams are better
- From: "nacelp" <nacelp@bright.net>
- Re: Signal generator for ecm bench
- From: "nacelp" <nacelp@bright.net>
- Re: 4L60E Trans controller
- From: Scott Knight <scott@scottknight.com>
- Re: 4L60E Trans controller
- From: "gene l. clifford" <genelc@idworld.net>
- Re: Big cams are better
- From: Shannen Durphey <shannen@grolen.com>
- Re: 4L60E Trans controller
- From: Shannen Durphey <shannen@grolen.com>
- Re: Signal generator for ecm bench
- From: Ludis Langens <ludis@cruzers.com>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: Shannen Durphey <shannen@grolen.com>
- Re: Idle richness with 7747.
- From: Shannen Durphey <shannen@grolen.com>
- Intro and a Request!
- From: "Craig Marcho" <marcho@global101.com>
- Re: Intro and a Request!
- From: "nacelp" <nacelp@bright.net>
- CYCLONE 700R4 AWD VSS
- From: "Swayze" <kswayze@bellsouth.net>
- Re: CYCLONE 700R4 AWD VSS
- From: Shannen Durphey <shannen@grolen.com>
- Re: CYCLONE 700R4 AWD VSS
- From: "nacelp" <nacelp@bright.net>
- Re: Big cams are better
- From: Joe Boucher <gmefigearhead@juno.com>
- Re: 305 to 350
- Re: CYCLONE 700R4 AWD VSS
- Re: 4L60E Trans controller/Ward
- From: Ward <WSpoonemore@excite.com>
- Re: CYCLONE 700R4 AWD VSS
- From: "nacelp" <nacelp@bright.net>
- Re: 4L60E Trans controller/Ward
- From: "gene l. clifford" <genelc@idworld.net>
- Re: 4L60E Trans controller/Ward
- From: "nacelp" <nacelp@bright.net>
- Re: Big cams are better
- From: "nacelp" <nacelp@bright.net>
- Re: AWWH and AWUP
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: 4L60E trans controller
- From: Nykyforuk <bnyk@oanet.com>
- Re: Idle richness with 7747.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: RN Carriers for 2732A EPROMS
- From: "Kevin Reynolds" <kereyn@gte.net>
- 730/727 instead of 7747... Has it been done?
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Idle richness with 7747.
- From: Shannen Durphey <shannen@grolen.com>
- Re: Idle richness with 7747.
- Re: 305 to 350
- From: "Programmer" <nwester@eidnet.org>
- RE: 89 F-body ECU file = 89 Y-body ECU file?
- From: Mike rolica <97005620@lambton.on.ca>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: Michael Davis <davis@mail.eecis.udel.edu>
- RE: 4L60E Trans controller
- From: Scott Parkhurst <ScottP@mcmullenargus.com>
- RE: 4L60E Trans controller
- From: Scott Parkhurst <ScottP@mcmullenargus.com>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: "nacelp" <nacelp@bright.net>
- RE: 4L60E Trans controller
- From: Scott Parkhurst <ScottP@mcmullenargus.com>
- Re: 4L60E Trans controller
- From: "nacelp" <nacelp@bright.net>
- RE: 4L60E Trans controller
- From: bearbvd@cmn.net (Greg Hermann)
- RE: 4L60E Trans controller
- From: "alexpeper" <alexpeper@email.msn.com>
- RE: 4L60E Trans controller
- From: bearbvd@cmn.net (Greg Hermann)
- RE: 89 F-body ECU file = 89 Y-body ECU file?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: 4L60E Trans controller
- From: bearbvd@cmn.net (Greg Hermann)
- RE: 4L60E Trans controller
- From: Scott Parkhurst <ScottP@mcmullenargus.com>
- RE: 4L60E Trans controller
- From: Scott Parkhurst <ScottP@mcmullenargus.com>
- VE stability
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- RE: 4L60E Trans controller
- From: Scott Parkhurst <ScottP@mcmullenargus.com>
- RE: 89 F-body ECU file = 89 Y-body ECU file?
- From: Mike Rolica <mrolica@meridian-mag.com>
- HEI
- From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
- MAP signal dampening
- From: "Swayze" <kswayze@bellsouth.net>
- Re: MAP signal dampening
- From: "nacelp" <nacelp@bright.net>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: "nacelp" <nacelp@bright.net>
- Re: VE stability
- From: "nacelp" <nacelp@bright.net>
- Re: MAP signal dampening
- From: "Swayze" <kswayze@bellsouth.net>
- Re: VE stability
- From: Roger Heflin <rah@horizon.hit.net>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: "nacelp" <nacelp@bright.net>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: "nacelp" <nacelp@bright.net>
- Re: MAP signal dampening
- From: gabe <gellett@earthlink.net>
- RE: 89 F-body ECU file = 89 Y-body ECU file?
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: "nacelp" <nacelp@bright.net>
- Re: 4L60E Trans controller
- From: Shannen Durphey <shannen@grolen.com>
- Re: 4L60E Trans controller
- From: Shannen Durphey <shannen@grolen.com>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: David Cooley <n5xmt@bellsouth.net>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: "Swayze" <kswayze@bellsouth.net>
- Re: VE stability
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: VE stability
- From: Scot Sealander <Sealand@clarityconnect.com>
- missed digest 106
- From: Nykyforuk <bnyk@oanet.com>
- Re: MAP signal dampening
- From: Ward <WSpoonemore@excite.com>
- Re: MAP signal dampening
- From: Ward <WSpoonemore@excite.com>
- RE: 4L60E Trans controller
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: VE stability
- From: "Dave & Irina Eicher" <sailors@mwci.net>
- RE: MAP signal dampening
- From: "alexpeper" <alexpeper@email.msn.com>
- RE: MAP signal dampening
- From: Carl Summers <InTech@writeme.com>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: "nacelp" <nacelp@bright.net>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: cwagner@info2000.net
- Bosch ecm
- From: Geoff Campbell <campbell@cyberwizards.com.au>
- RE: MAP signal dampening
- From: "Mike (Perth, Western Australia)" <erazmus@wantree.com.au>
- 89 F-body ECU file = 89 Y-body ECU file?
- From: Mark Romans <romans@pacbell.net>
- Dumping beyond $FFFF
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Bosch ecm
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: VE stability
- Re: MAP signal dampening
- From: "Swayze" <kswayze@bellsouth.net>
- BBC TB Needed
- From: "nacelp" <nacelp@bright.net>
- '747 top end fuel leanout
- From: "NickG" <nikog@mediaone.net>
- RE: MAP signal dampening
- From: Mike rolica <97005620@lambton.on.ca>
- RE: 89 F-body ECU file = 89 Y-body ECU file?
- From: Mike rolica <97005620@lambton.on.ca>
- Re: 89 F-body ECU file = 89 Y-body ECU file?
- From: "nacelp" <nacelp@bright.net>
- Re: '747 top end fuel leanout
- From: "nacelp" <nacelp@bright.net>
- RE: MAP signal dampening
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: '747 top end fuel leanout
- From: "NickG" <nikog@mediaone.net>
- RE: MAP signal dampening
- From: bearbvd@cmn.net (Greg Hermann)
- Re: '747 top end fuel leanout
- From: "nacelp" <nacelp@bright.net>
- Re: VE stability
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: MAP signal dampening
- From: "Programmer" <nwester@eidnet.org>
- thermistor time was: 89 F-body ECU file = 89 Y-body ECU file?
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: '747 top end fuel leanout
- From: "Programmer" <nwester@eidnet.org>
- RE: MAP signal dampening
- From: Carl Summers <InTech@writeme.com>
- Re: MAP signal damping
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Re: Idle richness with 7747.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Idle richness with 7747.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Bosch ecm
- From: "Geoff, Kate & Theo Campbell" <campbell@cyberwizards.com.au>
- Re: MAP signal damping
- From: "nacelp" <nacelp@bright.net>
- Re: MAP signal damping
- From: "John T. Martin" <gmman@eskimo.com>
- Re: Sensor response times; was 89 F-body ECU
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Sensor response times; was 89 F-body ECU
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: Sensor response times; was 89 F-body ECU
- From: "nacelp" <nacelp@bright.net>
- Re: Sensor response times; was 89 F-body ECU
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: MAP signal damping
- From: bearbvd@cmn.net (Greg Hermann)
- Re: Sensor response times; was 89 F-body ECU
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Idle richness with 7747.
- From: Shannen Durphey <shannen@grolen.com>
- Re: MAP signal damping/more cam help
- From: "Jeff M" <tystorm@email.msn.com>
- Re: MAP signal damping/more cam help
- From: "nacelp" <nacelp@bright.net>
- engine simulator
- From: "nacelp" <nacelp@bright.net>
- Re: engine simulator
- Re: MAP signal damping/more cam help
- From: "Jeff M" <tystorm@email.msn.com>
- Re: MAP signal damping/more cam help
- From: David Cooley <n5xmt@bellsouth.net>
- Re: MAP signal damping/more cam help
- Re: MAP signal damping/more cam help
- Re: MAP signal damping/more cam help
- From: "nacelp" <nacelp@bright.net>
- Re: MAP signal damping/more cam help
- From: "Jeff M" <tystorm@email.msn.com>
- 91 Lotus Carlton ECU
- From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: 91 Lotus Carlton ECU
- From: "nacelp" <nacelp@bright.net>
- ANHT
- From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
- RE: 91 Lotus Carlton ECU
- From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: 91 Lotus Carlton ECU
- From: "nacelp" <nacelp@bright.net>
- Re: ANHT
- From: cwagner@info2000.net
- 7730ALDL
- From: cwagner@info2000.net
- Re: 7730ALDL
- From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
- VSS differences for 746 to 730 swap
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: 7730ALDL
- From: gabe <gellett@earthlink.net>
- Re: 7730ALDL
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: 7730ALDL
- From: "Swayze" <kswayze@bellsouth.net>
- Re: ANHT
- From: "Swayze" <kswayze@bellsouth.net>
- Re: ANHT
- From: "nacelp" <nacelp@bright.net>
- Re: ANHT
- From: "Swayze" <kswayze@bellsouth.net>
- Re: VSS differences for 746 to 730 swap
- From: "nacelp" <nacelp@bright.net>
- Re: 7730ALDL
- From: Keith <kgil1@tampabay.rr.com>
- Wacky idea to force Alpha-n on a SD gm ecm.. a silly idea for thoes with map woes
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: VSS differences for 746 to 730 swap
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: 7730ALDL
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- Re: VSS differences for 746 to 730 swap
- From: "nacelp" <nacelp@bright.net>
- AKFL bin - anyone have AMXY?
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: AKFL bin - anyone have AMXY?
- From: "nacelp" <nacelp@bright.net>
- Re: 7730ALDL
- From: Nico Over <nicomax@erols.com>
- Re: VSS differences for 746 to 730 swap
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: 7730ALDL
- From: "Dave & Irina Eicher" <sailors@mwci.net>
- ALDL, ANHT
- From: cwagner@info2000.net
- Re: VSS differences for 746 to 730 swap
- From: cwagner@info2000.net
- Re: 91 Lotus Carlton ECU
- From: Shannen Durphey <shannen@grolen.com>
- Re: 91 Lotus Carlton ECU
- From: Shannen Durphey <shannen@grolen.com>
- Re: 7730ALDL
- From: "Programmer" <nwester@eidnet.org>
- Re: AKFL bin - anyone have AMXY?
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: ANHT
- From: Shannen Durphey <shannen@grolen.com>
- Re: 91 Lotus Carlton ECU
- From: Shannen Durphey <shannen@grolen.com>
- Re: VSS differences for 746 to 730 swap
- From: Shannen Durphey <shannen@grolen.com>
- Re: 91 Lotus Carlton ECU
- Re: VSS differences for 746 to 730 swap
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: 91 Lotus Carlton ECU
- Re: VSS differences for 746 to 730 swap
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: MAP signal dampening
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: VSS differences for 746 to 730 swap
- From: Shannen Durphey <shannen@grolen.com>
- RE: Map Signal Dampening
- From: "Michael Adams" <michaeladams1@compuserve.com>
- RE: 4L60E Trans controller
- From: Carl Summers <InTech@writeme.com>
- RE: Idle richness with 7747.
- From: Carl Summers <InTech@writeme.com>
- RE: 91 Lotus Carlton ECU
- From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: AWWH and AWUP
- From: "Dr.Acacio" <aortiz@w3ti.com.br>
- Ford to GM swap...
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Ford to GM swap...
- From: "Swayze" <kswayze@bellsouth.net>
- dumb & dumber
- From: "gene l. clifford" <genelc@idworld.net>
- Re: dumb & dumber
- From: "Swayze" <kswayze@bellsouth.net>
- Re: dumb & dumber
- From: David Cooley <n5xmt@bellsouth.net>
- Horsepower!!!
- From: David Cooley <n5xmt@bellsouth.net>
- Re: dumb & dumber
- From: steve ravet <sravet@arm.com>
- RE: Horsepower!!!
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Ford to GM swap...
- From: Ward <WSpoonemore@excite.com>
- RE: dumb & dumber (from the dumbest :-)
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Horsepower!!!
- From: Squash <realsquash@yahoo.com>
- Re: Ford to GM swap...
- From: David Cooley <n5xmt@bellsouth.net>
- RE: Horsepower!!!
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Ford to GM swap...
- Re: Ford to GM swap...
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Ford to GM swap...
- RE: dumb & dumber
- From: Carl Summers <InTech@writeme.com>
- Re: dumb & dumber
- From: "nacelp" <nacelp@bright.net>
- Re: dumb & dumber
- From: "nacelp" <nacelp@bright.net>
- RE: Horsepower!!!
- From: Dave Plummer <davepl@MICROSOFT.com>
- 700R4 TCC Solenoid bad? (limited EFI content)
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: 700R4 TCC Solenoid bad? (limited EFI content)
- From: David Cooley <n5xmt@bellsouth.net>
- RE: Horsepower!!!
- From: David Cooley <n5xmt@bellsouth.net>
- Re: 700R4 TCC Solenoid bad? (limited EFI content)
- From: steve ravet <sravet@arm.com>
- Re: 700R4 TCC Solenoid bad? (limited EFI content)
- From: "nacelp" <nacelp@bright.net>
- Re: dumb & dumber/bad #
- From: "gene l. clifford" <genelc@idworld.net>
- RE: GM Powertrain
- From: Carl Summers <InTech@writeme.com>
- Paddle Shifters - Electronic Trans Controller
- From: "Walter Sherwin" <wsherwin@idirect.com>
- RE: Horsepower!!!
- From: Don.F.Broadus@ucm.com
- PCM min for tranny oper
- From: "nacelp" <nacelp@bright.net>
- HLR0977 - '85 Corvette Export EPROM
- From: "Craig Marcho" <marcho@global101.com>
- Re: dumb & dumber/bad #
- From: "nacelp" <nacelp@bright.net>
- HLR0977 - '85 Corvette Export EPROM
- From: "Craig Marcho" <marcho@global101.com>
- 1226156
- From: "Programmer" <nwester@eidnet.org>
- Re: MAP signal dampening
- From: "Programmer" <nwester@eidnet.org>
- Re: dumb & dumber
- From: Shannen Durphey <shannen@grolen.com>
- Re: 91 Lotus Carlton ECU
- Re: dumb & dumber
- From: Shannen Durphey <shannen@grolen.com>
- Re: dumb & dumber/bad #
- From: Shannen Durphey <shannen@grolen.com>
- Re: 700R4 TCC Solenoid bad? (limited EFI content)
- From: "mike mager" <mikemager@hotmail.com>
- Re: 91 Lotus Carlton ECU
- From: Shannen Durphey <shannen@grolen.com>
- Re: dumb & dumber
- From: Shannen Durphey <shannen@grolen.com>
- Re: Horsepower!!!
- From: Tom Sharpe <twsharpe@mtco.com>
- RE: Horsepower!!!
- From: Squash <realsquash@yahoo.com>
- Re: Horsepower!!!
- From: "Dave Zug" <dzug@delanet.com>
- Re: dumb & dumber/bad #
- From: "C. Brooks" <cbrooks1@tqci.net>
- Re: 700R4 TCC Solenoid bad? (limited EFI content)
- RE: Paddle Shifters - Electronic Trans Controller
- From: Scott Parkhurst <ScottP@mcmullenargus.com>
- RE: Horsepower!!!
- From: Squash <realsquash@yahoo.com>
- Re: dumb & dumber
- From: "Swayze" <kswayze@bellsouth.net>
- Re: AWWH and AWUP (and BAMY)
- From: "Walter Sherwin" <wsherwin@idirect.com>
- MAP sensors
- From: mswayze@truswood.com (Mike Swayze)
- Re: dumb & dumber
- From: "gene l. clifford" <genelc@idworld.net>
- Fw: 12497316
- From: "gene l. clifford" <genelc@idworld.net>
- Re: HLR0977 - '85 Corvette Export EPROM
- From: "nacelp" <nacelp@bright.net>
- Re: HLR0977 - '85 Corvette Export EPROM
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: 700R4 TCC Solenoid bad? (limited EFI content)
- From: "Patrick G. Moore" <pmoore@cmr.gov>
- Re: 700R4 TCC Solenoid bad? (limited EFI content)
- From: Roger Heflin <rah@horizon.hit.net>
- Re: dumb & dumber
- From: steve ravet <sravet@arm.com>
- RE: dumb & dumber
- From: Scott Parkhurst <ScottP@mcmullenargus.com>
- Re: MAP sensors
- From: "nacelp" <nacelp@bright.net>
- Re: 12497316
- From: "nacelp" <nacelp@bright.net>
- Ignition Simulator
- From: "nacelp" <nacelp@bright.net>
- Re: MAP sensors
- From: "Swayze" <kswayze@bellsouth.net>
- Re: 12497316
- From: "Swayze" <kswayze@bellsouth.net>
- Re: 700R4 TCC Solenoid bad? (limited EFI content)
- From: "Programmer" <nwester@eidnet.org>
- Re: Ignition Simulator
- From: David Cooley <n5xmt@bellsouth.net>
- Re: 12497316/ fax copy
- From: "gene l. clifford" <genelc@idworld.net>
- Re: dumb & dumber
- From: Shannen Durphey <shannen@grolen.com>
- Re: HLR0977 - '85 Corvette Export EPROM
- From: Shannen Durphey <shannen@grolen.com>
- Re: 700R4 TCC Solenoid bad? (limited EFI content)
- From: Shannen Durphey <shannen@grolen.com>
- Re: 700R4 TCC Solenoid bad? (limited EFI content)
- From: "John T. Martin" <gmman@eskimo.com>
- Re: TCC lockup on 700R4
- From: Dig <turbodig@yahoo.com>
- Re: 700R4 TCC Solenoid bad? (limited EFI content)
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: 700R4 TCC Solenoid bad? (limited EFI content)
- From: "Programmer" <nwester@eidnet.org>
- Delco
- From: "black maj" <blackmin@hotmail.com>
- Re: Delco
- From: "Programmer" <nwester@eidnet.org>
- Re: 1226156
- From: "Programmer" <nwester@eidnet.org>
- RE: GM Powertrain
- From: "Bob Groger" <monitorguy@eagleserver.com>
- Re: dumb & dumber
- From: "Swayze" <kswayze@bellsouth.net>
- Re: 12497316/ fax copy
- From: "Jeff Kopp" <jkopp@direcpc.com>
- Re: Delco
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: MAP signal damping/more cam help
- From: Ludis Langens <ludis@cruzers.com>
- Re: 91 Lotus Carlton ECU
- From: Ludis Langens <ludis@cruzers.com>
- Re: Wacky idea to force Alpha-n on a SD gm ecm
- From: Ludis Langens <ludis@cruzers.com>
- Re: Wacky idea to force Alpha-n on a SD gm ecm
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Delco
- From: "black maj" <blackmin@hotmail.com>
- Re: 91 Lotus Carlton ECU
- Re: 91 Lotus Carlton ECU
- From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
- Re: 91 Lotus Carlton ECU
- From: "Swayze" <kswayze@bellsouth.net>
- TCom_MAP EFax
- From: mswayze@truswood.com (Mike Swayze)
- Re: TCom_MAP EFax
- From: "nacelp" <nacelp@bright.net>
- RE: Horsepower!!!
- PCM Questions
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- My turn for a conversion
- 1228331 (16157364?)
- From: mswayze@truswood.com (Mike Swayze)
- Color Tune - Safety Warning !
- From: "Mike (Perth, Western Australia)" <erazmus@wantree.com.au>
- Re: Color Tune - Safety Warning !
- From: robert.schofield@philips.com
- Re: 1228331 (16157364?)
- From: "Superior Chevrolet" <superchevyparts@mindspring.com>
- Re: 1228331 (16157364?)
- From: "gene l. clifford" <genelc@idworld.net>
- Re: 1228331 (16157364?)
- From: "Swayze" <kswayze@bellsouth.net>
- Re: My turn for a conversion
- From: "nacelp" <nacelp@bright.net>
- Cam tuning
- From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
- Re: 1228331 (16157364?)
- From: "nacelp" <nacelp@bright.net>
- Re: My turn for a conversion
- Re: Cam tuning
- From: "nacelp" <nacelp@bright.net>
- Re: My turn for a conversion
- From: "nacelp" <nacelp@bright.net>
- Re: My turn for a conversion
- Re: My turn for a conversion
- From: "nacelp" <nacelp@bright.net>
- Re: My turn for a conversion
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Cam tuning
- From: Roger Heflin <rah@horizon.hit.net>
- KalMaker experience?
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- RE: GM Powertrain
- From: Carl Summers <InTech@writeme.com>
- Re: Cam tuning
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: MAP signal dampening
- From: Tom Sharpe <twsharpe@mtco.com>
- LS1 in 64 Impala SS
- From: "Dave & Irina Eicher" <sailors@mwci.net>
- Re: 1228331 (16157364?)
- From: Shannen Durphey <shannen@grolen.com>
- Re: LS1 in 64 Impala SS
- From: PCMdoc <PCMdoc@surfree.com>
- Re: 1228331 (16157364?)
- From: "gene l. clifford" <genelc@idworld.net>
- Re: LS1 in 64 Impala SS
- From: "alexpeper" <alexpeper@email.msn.com>
- E(E)PROM pn and speeds
- From: Bob Valentine <bob@tecmark.com>
- Re: dumb & dumber
- From: Shannen Durphey <shannen@grolen.com>
- Re: E(E)PROM pn and speeds
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: 1228331 (16157364?)
- From: Shannen Durphey <shannen@grolen.com>
- Re: LS1 in 64 Impala SS
- From: "Dave & Irina Eicher" <sailors@mwci.net>
- TPI 747
- From: "nacelp" <nacelp@bright.net>
- Re: MAP signal dampening
- From: "Programmer" <nwester@eidnet.org>
- Re: TPI 747
- From: "Programmer" <nwester@eidnet.org>
- Re: TPI 747
- From: rr <RRauscher@nni.com>
- Re: TPI 747
- From: "nacelp" <nacelp@bright.net>
- Re: TPI 747
- From: "nacelp" <nacelp@bright.net>
- Re: dumb & dumber
- From: "Swayze" <kswayze@bellsouth.net>
- Re: dumb & dumber
- From: "nacelp" <nacelp@bright.net>
- Re: TPI 747
- From: "Programmer" <nwester@eidnet.org>
- Re: TPI 747
- From: "nacelp" <nacelp@bright.net>
- Re: PCM Questions
- From: Ward <WSpoonemore@excite.com>
- 7747 Bin needed
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: LS1 in 64 Impala SS
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: TPI 747
- From: rr <RRauscher@nni.com>
- Re: 7747 Bin needed
- From: rr <RRauscher@nni.com>
- Re: TPI 747
- From: "nacelp" <nacelp@bright.net>
- Re: PCM Questions
- From: "nacelp" <nacelp@bright.net>
- Re: LS1 in 64 Impala SS
- From: "Dave & Irina Eicher" <sailors@mwci.net>
- Re: GM Powertrain
- From: ron harris <harris1@execpc.com>
- Re: 7747 Bin needed
- From: Shannen Durphey <shannen@grolen.com>
- Re: Paddle Shifters - Electronic Trans Controller
- From: "Swayze" <kswayze@bellsouth.net>
- power towers ??
- From: "Programmer" <nwester@eidnet.org>
- Re: power towers ??
- From: "nacelp" <nacelp@bright.net>
- Re: MAP signal dampening
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: MAP signal dampening
- From: "Programmer" <nwester@eidnet.org>
- Re: power towers ??
- From: "Programmer" <nwester@eidnet.org>
- Re: power towers ??
- From: "nacelp" <nacelp@bright.net>
- Re: LS1 in 64 Impala SS
- From: "alexpeper" <alexpeper@email.msn.com>
- GM circuit numbering
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: GM circuit numbering
- From: "nacelp" <nacelp@bright.net>
- DIS again
- From: "Swayze" <kswayze@bellsouth.net>
- Newbies, and archives
- From: "nacelp" <nacelp@bright.net>
- Re: 1228331 (16157364?)
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: DIS again
- From: David Cooley <n5xmt@bellsouth.net>
- Re: 1228331 (16157364?)
- From: Marc Randolph <mrand@pobox.com>
- Re: LS1 in 64 Impala SS
- From: David Cooley <n5xmt@bellsouth.net>
- Re: power towers ??
- From: "Programmer" <nwester@eidnet.org>
- Re: power towers ??
- From: "nacelp" <nacelp@bright.net>
- RE: Paddle Shifters - Electronic Trans Controller
- From: Scott Parkhurst <ScottP@mcmullenargus.com>
- Re: GM circuit numbering
- From: steve ravet <sravet@arm.com>
- Re: 1228331 (16157364?)
- From: "superchevy" <superchevyparts@mindspring.com>
- Re: Paddle Shifters - Electronic Trans Controller
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Cam tuning
- From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
- Re: LS1 in 64 Impala SS
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: Newbies, and archives
- From: Doug Dayson <djdayson@ix.netcom.com>
- Re: Cam tuning
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- RE: Paddle Shifters - Electronic Trans Controller
- From: Scott Parkhurst <ScottP@mcmullenargus.com>
- Re: Paddle Shifters - Electronic Trans Controller
- From: "Swayze" <kswayze@bellsouth.net>
- RE: Paddle Shifters - Electronic Trans Controller
- From: Scott Parkhurst <ScottP@mcmullenargus.com>
- Re: LS1 in 64 Impala SS
- From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
- Re: Cam tuning
- From: "nacelp" <nacelp@bright.net>
- Re: Cam tuning
- From: "nacelp" <nacelp@bright.net>
- Re: Cam tuning
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- RE: Cam tuning
- From: "the Fredericks" <fredericksk@worldnet.att.net>
- RE: Cam tuning
- From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
- cam tuning
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: Cam tuning
- From: "Robert Eickhorst" <rleickho@home.com>
- Re: Cam tuning
- From: "nacelp" <nacelp@bright.net>
- Re: Cam tuning
- From: "nacelp" <nacelp@bright.net>
- RE: Cam tuning
- From: "the Fredericks" <fredericksk@worldnet.att.net>
- added baro sensor to 730
- From: jsg@jsgpc.mrcday.com
- Speedo scaler
- From: "nacelp" <nacelp@bright.net>
- RE: Cam tuning
- From: Roger Heflin <rah@horizon.hit.net>
- Re: PCM Questions
- From: Ludis Langens <ludis@cruzers.com>
- Re: 1228331 (16157364?)
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- TBI vs Port Injected
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- Re: Cam tuning
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: Cam tuning
- From: "nacelp" <nacelp@bright.net>
- Re: Speedo scaler
- From: PCMdoc <PCMdoc@surfree.com>
- Re: TBI vs Port Injected
- From: "nacelp" <nacelp@bright.net>
- Re: added baro sensor to 730
- From: "nacelp" <nacelp@bright.net>
- Re: Speedo scaler
- From: "nacelp" <nacelp@bright.net>
- Re: TBI vs Port Injected
- Re: Speedo scaler
- From: PCMdoc <PCMdoc@surfree.com>
- Re: 1228331 (16157364?)
- From: "superchevy" <superchevyparts@mindspring.com>
- Re: 1228331 (16157364?)
- From: "nacelp" <nacelp@bright.net>
- Re: added baro sensor to 730
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: Cam tuning
- From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
- Re: TBI vs Port Injected
- From: Doug Dayson <djdayson@ix.netcom.com>
- Re: Cam tuning
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Speedo scaler
- From: Ken Kelly <kenkelly@lucent.com>
- Help with '85 Corvette '870 ECM
- From: "Craig Marcho" <marcho@global101.com>
- Re: Help with '85 Corvette '870 ECM
- From: "superchevy" <superchevyparts@mindspring.com>
- Re: Cam tuning
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: Speedo scaler
- From: "nacelp" <nacelp@bright.net>
- Re: Help with '85 Corvette '870 ECM
- From: Gabe <gellett@earthlink.net>
- Re: Cam tuning
- From: Barry Tisdale <btisdale@cybersol.com>
- RE: Help with '85 Corvette '870 ECM
- From: "Craig Marcho" <marcho@global101.com>
- Re: added baro sensor to 730
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Help with '85 Corvette '870 ECM
- From: "nacelp" <nacelp@bright.net>
- Re: added baro sensor to 730
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: 1228331 (16157364?)
- From: Shannen Durphey <shannen@grolen.com>
- Re: added baro sensor to 730
- From: "nacelp" <nacelp@bright.net>
- Re: 1228331 (16157364?)
- From: "Robert Eickhorst" <rleickho@home.com>
- Re: Cam tuning
- From: "nacelp" <nacelp@bright.net>
- Re: TBI vs Port Injected
- From: "nacelp" <nacelp@bright.net>
- Re: 1228331 (16157364?)
- From: "C and T" <candt@techcom.net>
- RE: 1228331 (16157364?)
- From: "the Fredericks" <fredericksk@worldnet.att.net>
- Re: TBI vs Port Injected
- From: Ward <WSpoonemore@excite.com>
- Re: Cam tuning
- From: "nacelp" <nacelp@bright.net>
- Re: Cam tuning
- RE: 1228331 (16157364?)
- From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
- RE: 1228331 (16157364?)
- From: Carl Summers <InTech@writeme.com>
- RE: 1228331 (16157364?)
- From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: 1228331 (16157364?)
- Re: 1228331 (16157364?)
- From: "superchevy" <superchevyparts@mindspring.com>
- Re: TBI vs Port Injected
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- Re: TBI vs Port Injected
- From: David Cooley <n5xmt@bellsouth.net>
- Re: TBI vs Port Injected
- Re: TBI vs Port Injected
- From: David Cooley <n5xmt@bellsouth.net>
- Re: TBI vs Port Injected
- From: "nacelp" <nacelp@bright.net>
- Re: Cam tuning
- From: Scott Knight <scott@scottknight.com>
- MAF part no needed 88 vin C
- From: "nacelp" <nacelp@bright.net>
- Re: 1228331 (16157364?)
- From: Tyler Townsley <ttownsley@sprynet.com>
- Re: Cam tuning
- From: Shannen Durphey <shannen@grolen.com>
- Re: Cam tuning
- From: Scott Knight <scott@scottknight.com>
- Re: Cam tuning
- From: Shannen Durphey <shannen@grolen.com>
- Re: Cam tuning
- From: Scott Knight <scott@scottknight.com>
- 88 asd super chip
- From: "Mike" <Itsmike@lvcm.com>
- Re: 88 asd super chip
- From: Mark Romans <romans@pacbell.net>
- Driving an HEI Module with other signals
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Driving an HEI Module with other signals
- From: Bob Valentine <bob@tecmark.com>
- Re: Cam tuning
- From: Shannen Durphey <shannen@grolen.com>
- Re: 88 asd super chip
- From: "nacelp" <nacelp@bright.net>
- Re: Driving an HEI Module with other signals
- From: Shannen Durphey <shannen@grolen.com>
- Re: Driving an HEI Module with other signals
- From: "nacelp" <nacelp@bright.net>
- Re: Driving an HEI Module with other signals
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: Driving an HEI Module with other signals
- From: "mike mager" <mikemager@hotmail.com>
- Re: Driving an HEI Module with other signals
- From: Mike Veldman <vmike@email.ceat.okstate.edu>
- RE: Driving an HEI Module with other signals
- From: Don.F.Broadus@ucm.com
- RE: Driving an HEI Module with other signals
- From: Don.F.Broadus@ucm.com
- A/F gauges and O2 sensors.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Driving an HEI Module with other signals
- From: "nacelp" <nacelp@bright.net>
- RE: Distributor Machine/Ignition Tests
- From: Mike Veldman <vmike@email.ceat.okstate.edu>
- Re: A/F gauges and O2 sensors.
- From: "nacelp" <nacelp@bright.net>
- RE: Distributor Machine/Ignition Tests
- From: Don.F.Broadus@ucm.com
- HEI Module versions?
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- RE: HEI Module versions?
- From: Don.F.Broadus@ucm.com
- Re: Cam tuning
- From: Ludis Langens <ludis@cruzers.com>
- Re: Cam tuning
- From: Ludis Langens <ludis@cruzers.com>
- Re: HEI Module versions?
- From: Ludis Langens <ludis@cruzers.com>
- RE: HEI Module versions?
- From: Don.F.Broadus@ucm.com
- Re: HEI Module versions?
- From: "nacelp" <nacelp@bright.net>
- Re: Cam tuning
- From: "nacelp" <nacelp@bright.net>
- Re: 88 asd super chip
- From: "Programmer" <nwester@eidnet.org>
- Re: Cam tuning
- From: Scott Knight <scott@scottknight.com>
- E-prom ereaser& burner
- From: "gene l. clifford" <genelc@idworld.net>
- Re: E-prom ereaser& burner
- From: "black maj" <blackmin@hotmail.com>
- RE: E-prom ereaser& burner
- From: "Craig Marcho" <marcho@global101.com>
- Re: E-prom ereaser& burner
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: E-prom ereaser& burner
- From: "nacelp" <nacelp@bright.net>
- Re: Cam tuning
- From: "nacelp" <nacelp@bright.net>
- Re: E-prom ereaser& burner
- From: "nacelp" <nacelp@bright.net>
- Re: E-prom ereaser& burner
- From: "gene l. clifford" <genelc@idworld.net>
- Re: E-prom ereaser& burner
- From: "gene l. clifford" <genelc@idworld.net>
- Re: E-prom ereaser& burner
- From: "gene l. clifford" <genelc@idworld.net>
- Re: E-prom ereaser& burner
- From: "nacelp" <nacelp@bright.net>
- Re: E-prom ereaser& burner
- Re: E-prom ereaser& burner
- Re: E-prom ereaser& burner
- From: Keith <kgil1@tampabay.rr.com>
- Archives
- From: Keith <kgil1@tampabay.rr.com>
- Re: 88 asd super chip
- From: Ward <WSpoonemore@excite.com>
- Re: E-prom ereaser& burner
- From: "NickG" <nikog@mediaone.net>
- VE table 1 & 2 relationship, and BLMs past 3600rpm.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: E-prom ereaser& burner
- From: Bob Valentine <bob@tecmark.com>
- Re: E-prom ereaser& burner
- From: "gene l. clifford" <genelc@idworld.net>
- Re: E-prom ereaser& burner
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: E-prom ereaser& burner
- From: Bob Valentine <bob@tecmark.com>
- Re: E-prom ereaser& burner
- Re: E-prom ereaser& burner
- From: Roger Heflin <rah@horizon.hit.net>
- Re: VE table 1 & 2 relationship, and BLMs past 3600rpm.
- From: Roger Heflin <rah@horizon.hit.net>
- Re: E-prom ereaser& burner
- From: "Programmer" <nwester@eidnet.org>
- Re: E-prom ereaser& burner
- From: "gene l. clifford" <genelc@idworld.net>
- Re: E-prom ereaser& burner
- From: "gene l. clifford" <genelc@idworld.net>
- Re: E-prom ereaser& burner
- From: Roger Heflin <rah@horizon.hit.net>
- Re: E-prom ereaser& burner
- From: steve ravet <sravet@arm.com>
- Reconditioned PB10s $40 off was E-prom burner & eraser.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: VE table 1 & 2 relationship, and BLMs past 3600rpm.
- From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
- Re: VE table 1 & 2 relationship, and BLMs past 3600rpm.
- From: Roger Heflin <rah@horizon.hit.net>
- Re: E-prom ereaser& burner
- From: "nacelp" <nacelp@bright.net>
- Re: E-prom ereaser& burner
- From: Roger Heflin <rah@horizon.hit.net>
- Re: E-prom ereaser& burner
- From: "nacelp" <nacelp@bright.net>
- Re: E-prom ereaser& burner
- From: David Cooley <n5xmt@bellsouth.net>
- ECMS for sale
- From: "nacelp" <nacelp@bright.net>
- BLM collection!?
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: E-prom ereaser& burner
- From: "Dr.Acacio" <aortiz@w3ti.com.br>
- Emulator
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: VE table 1 & 2 relationship, and BLMs past 3600rpm.
- From: Ward <WSpoonemore@excite.com>
- Re: BLM collection!?
- From: "Edward J. Malkiewicz" <krazyed@worldnet.att.net>
- Re: BLM collection!?
- From: "Edward J. Malkiewicz" <krazyed@worldnet.att.net>
- Re: E-prom ereaser& burner
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- First GN chip
- From: "nacelp" <nacelp@bright.net>
- Re: BLM collection!?
- Re: First GN chip
- Re: First GN chip
- From: "nacelp" <nacelp@bright.net>
- Re: First GN chip
- From: DC Smith <morepoweral@tetranet.net>
- Re: First GN chip
- From: "Programmer" <nwester@eidnet.org>
- Re: E-prom ereaser& burner
- From: David Cooley <n5xmt@bellsouth.net>
- Checksum questions
- From: Bob Valentine <bob@tecmark.com>
- Re: First GN chip
- From: "nacelp" <nacelp@bright.net>
- RE: First GN chip
- From: "the Fredericks" <fredericksk@worldnet.att.net>
- Re: First GN chip
- From: "nacelp" <nacelp@bright.net>
- Re: Checksum questions
- From: "nacelp" <nacelp@bright.net>
- Re: First GN chip
- From: David Cooley <n5xmt@bellsouth.net>
- Re: First GN chip
- From: "nacelp" <nacelp@bright.net>
- Re: First GN chip
- From: "nacelp" <nacelp@bright.net>
- Re: Checksum questions
- From: "TK" <terryk@foothill.net>
- Re: Checksum questions
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Checksum questions
- From: Bob Valentine <bob@tecmark.com>
- Re: First GN chip
- Re: Checksum questions
- Re: First GN chip
- Re: First GN chip
- From: "nacelp" <nacelp@bright.net>
- Re: First GN chip
- From: "nacelp" <nacelp@bright.net>
- Did I miss something?
- New member with VE table Q's
- From: Joe Shuhy <shuhy@cfl.rr.com>
- Re: Checksum questions
- From: Bob Valentine <bob@tecmark.com>
- Re: Checksum questions
- From: "nacelp" <nacelp@bright.net>
- Re: Checksum questions
- From: "TK" <terryk@foothill.net>
- Re: New member with VE table Q's
- From: "nacelp" <nacelp@bright.net>
- Re: Checksum questions
- From: "nacelp" <nacelp@bright.net>
- ND 1181281
- From: "Swayze" <kswayze@bellsouth.net>
- ECM compatibility
- From: "C and T" <candt@techcom.net>
- Re: Checksum questions
- Re: Checksum questions
- From: "nacelp" <nacelp@bright.net>
- Re: ECM compatibility
- From: "nacelp" <nacelp@bright.net>
- Re: Checksum questions
- Re: Checksum questions
- From: "TK" <terryk@foothill.net>
- Re: Checksum questions
- From: Shannen Durphey <shannen@grolen.com>
- Re: Checksum questions
- From: "nacelp" <nacelp@bright.net>
- Quad-4 (1228707 ECM) Rough Idle Problem
- From: Will Remaklus <remaklus@attglobal.net>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- Re: Checksum questions
- From: DC Smith <morepoweral@tetranet.net>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: Will Remaklus <remaklus@attglobal.net>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: "nacelp" <nacelp@bright.net>
- Re: Did I miss something?
- From: steve ravet <sravet@arm.com>
- Re: 1228331 (16157364?)
- From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
- Re: 1228331 (16157364?)
- From: "Jeff Kopp" <jkopp@direcpc.com>
- 48T group wheel buy status ???
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: Checksum questions
- From: Ludis Langens <ludis@cruzers.com>
- mil light
- From: "Mike" <Itsmike@lvcm.com>
- Re: mil light
- From: "nacelp" <nacelp@bright.net>
- Re: 1228331 (16157364?)
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Checksum questions
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Xeltek EPROM Programmers (Pls Read)
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: mil light
- From: PCMdoc <PCMdoc@surfree.com>
- Bosch ABS info
- From: Stuart Bunning <stuart@kenelec.com.au>
- Re: Xeltek EPROM Programmers (Pls Read)
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Checksum questions
- From: DC Smith <morepoweral@tetranet.net>
- 52 Lb injectors
- From: DC Smith <morepoweral@tetranet.net>
- Injector Problem
- From: Carl Summers <InTech@writeme.com>
- MEFI3 was GM Powertrain
- From: 303print <303print@northrim.net>
- Re: Injector Problem
- From: "nacelp" <nacelp@bright.net>
- Re: Injector Problem
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: 1228331 (16157364?)
- From: "superchevy" <superchevyparts@mindspring.com>
- [no subject]
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- Re: A/F gauges and O2 sensors.
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Scanners vs Diacom (and recording scanners)
- From: "nacelp" <nacelp@bright.net>
- new subscriber please help ecm problem
- From: Ed Stoll <edstoll2019@yahoo.com>
- Re: new subscriber please help ecm problem
- Re: Injector Problem
- From: Shannen Durphey <shannen@grolen.com>
- Re: Xeltek EPROM Programmers (Pls Read)
- From: Bob Valentine <bob@tecmark.com>
- Re: Injector Problem
- Re: Injector Problem
- From: "Mike (Perth, Western Australia)" <erazmus@wantree.com.au>
- GM Alternate fuel service manuals
- Wastegate Controller
- From: "nacelp" <nacelp@bright.net>
- Re: new subscriber please help ecm problem
- From: "nacelp" <nacelp@bright.net>
- Re: Xeltek EPROM Programmers (Pls Read)
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: Will Remaklus <remaklus@attglobal.net>
- Re: GM Alternate fuel service manuals
- From: kb4mxo <kb4mxo@mwt.net>
- Re: new subscriber please help ecm problem
- From: Rex Weatherford <rex.weatherford@terraglyph.com>
- Re: GM Alternate fuel service manuals
- From: "Mike (Perth, Western Australia)" <erazmus@wantree.com.au>
- Re: GM Alternate fuel service manuals
- Re: GM Alternate fuel service manuals
- Re: GM Alternate fuel service manuals
- From: "Mike (Perth, Western Australia)" <erazmus@wantree.com.au>
- RE: Wastegate Controller
- From: "Michael Adams" <michaeladams1@compuserve.com>
- Re: GM Alternate fuel service manuals
- Re: new subscriber please help ecm problem
- From: Shannen Durphey <shannen@grolen.com>
- Re: new subscriber please help ecm problem
- From: "nacelp" <nacelp@bright.net>
- Re: new subscriber please help ecm problem
- From: "Jeff M" <tystorm@email.msn.com>
- Boost controller
- From: "nacelp" <nacelp@bright.net>
- Re: Bosch ABS info
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: new subscriber please help ecm problem
- From: Ed Stoll <edstoll2019@yahoo.com>
- Re: Wastegate Controller
- 7749 guru needed....
- From: Barry Tisdale <btisdale@cybersol.com>
- Re:alldata/was new subscriber please help ecm problem
- From: Mike Rolica <97005620@lambton.on.ca>
- Re: GM Alternate fuel service manuals
- From: Dig <turbodig@yahoo.com>
- Bins are us
- From: "nacelp" <nacelp@bright.net>
- Re: 7749 guru needed....
- From: "nacelp" <nacelp@bright.net>
- Re: GM Alternate fuel service manuals
- Re: Bins are us
- From: steve ravet <sravet@arm.com>
- Re: Wastegate Controller
- From: DC Smith <morepoweral@tetranet.net>
- V6 ALDL Communications
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- GM 4 cylinder DIS
- From: "Jurgen Hartwig" <turbo6bar@hotmail.com>
- Re: new subscriber please help ecm problem
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: GM 4 cylinder DIS
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: GM 4 cylinder DIS
- Non efi, ecm, CCC (Really OLD ECM!)
- From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
- Re: V6 ALDL Communications
- From: Ludis Langens <ludis@cruzers.com>
- Re: GM 4 cylinder DIS
- From: "nacelp" <nacelp@bright.net>
- RE: Non efi, ecm, CCC (Really OLD ECM!)
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: Non efi, ecm, CCC (Really OLD ECM!)
- From: "C and T" <candt@techcom.net>
- RE: Bins are us
- From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: Non efi, ecm, CCC (Really OLD ECM!)
- From: "nacelp" <nacelp@bright.net>
- Re: Wastegate Controller
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- Re: Wastegate Controller
- From: "nacelp" <nacelp@bright.net>
- Re: GM 4 cylinder DIS
- From: "Jurgen Hartwig" <turbo6bar@hotmail.com>
- 77 caddy manual
- From: "Swayze" <kswayze@bellsouth.net>
- Bins are us
- From: "nacelp" <nacelp@bright.net>
- Re: GM 4 cylinder DIS
- From: "nacelp" <nacelp@bright.net>
- spking of octane was Re: Bins are us
- From: "Swayze" <kswayze@bellsouth.net>
- RE: spking of octane was Re: Bins are us
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Bins are us
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: spking of octane was Re: Bins are us
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Bins are us
- From: "Programmer" <nwester@eidnet.org>
- Re: spking of octane was Re: Bins are us
- From: "nacelp" <nacelp@bright.net>
- RE: Bins are us
- From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
- Re: Bins are us
- From: "Swayze" <kswayze@bellsouth.net>
- Re: spking of octane was Re: Bins are us
- From: "nacelp" <nacelp@bright.net>
- Re: Wastegate Controller
- From: DC Smith <morepoweral@tetranet.net>
- Re: Bins are us
- From: Bob Valentine <bob@tecmark.com>
- Re: Bins are us
- From: "nacelp" <nacelp@bright.net>
- Re: GM 4 cylinder DIS
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: GM Alternate fuel service manuals
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: V6 ALDL Communications
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Bins are us
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: new subscriber please help ecm problem
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Bins are us
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: V6 ALDL Communications
- From: "nacelp" <nacelp@bright.net>
- Re: V6 ALDL Communications
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Bins are us
- From: Shannen Durphey <shannen@grolen.com>
- Re: GM Alternate fuel service manuals
- GM Eprom Bin file
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: 7749 guru needed....
- From: Barry Tisdale <btisdale@cybersol.com>
- RE: Bins are us
- From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: Bins are us
- From: Shannen Durphey <shannen@grolen.com>
- Re: 7749 guru needed....
- From: "nacelp" <nacelp@bright.net>
- Re: Bins are us
- From: "Programmer" <nwester@eidnet.org>
- Pocket Programmer
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Pocket Programmer
- Re: Pocket Programmer
- From: "John T. Martin" <gmman@eskimo.com>
- Re: Pocket Programmer , brain fade
- From: "John T. Martin" <gmman@eskimo.com>
- Re: GM Alternate fuel service manuals
- From: "John T. Martin" <gmman@eskimo.com>
- Re: Pocket Programmer/thanks
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Pocket Programmer/thanks
- Prom ID's
- From: "TK" <terryk@foothill.net>
- Re: GM Eprom Bin file
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Pocket Programmer
- From: Shannen Durphey <shannen@grolen.com>
- Re: Pocket Programmer/thanks
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Pocket Programmer
- From: "gene l. clifford" <genelc@idworld.net>
- Re: 7749 guru needed....
- From: Ludis Langens <ludis@cruzers.com>
- Re: Bins are us
- From: Ludis Langens <ludis@cruzers.com>
- Re: 7749 guru needed....
- From: "nacelp" <nacelp@bright.net>
- Re: GM Alternate fuel service manuals
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: 7749 guru needed....
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: 7749 guru needed....
- From: "TK" <terryk@foothill.net>
- Re: 7749 guru needed....
- From: "nacelp" <nacelp@bright.net>
- Re: 7749 guru needed....
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: GM Eprom Bin file
- From: "nacelp" <nacelp@bright.net>
- Re: 7749 guru needed....
- From: "nacelp" <nacelp@bright.net>
- Re: Pocket Programmer/Finished <(©¿©)>
- From: "Jeff M" <tystorm@email.msn.com>
- Re: 7749 guru needed....
- From: Ludis Langens <ludis@cruzers.com>
- Re: 7749 guru needed....
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: 7749 guru needed....
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: Will Remaklus <remaklus@attglobal.net>
- RE: 7749 guru needed....
- From: "Jim Sloan" <leroy@sunflower.com>
- Re: Pocket Programmer/Finished <(©¿©)>
- From: DC Smith <morepoweral@tetranet.net>
- RE: 7749 guru needed....
- From: Barry Tisdale <btisdale@cybersol.com>
- Fw: MSD sellin Crap Still
- From: "nacelp" <nacelp@bright.net>
- Re: 7749 guru needed....
- From: "TK" <terryk@foothill.net>
- Re: Fw: MSD sellin Crap Still
- From: kb4mxo <kb4mxo@mwt.net>
- Re: Fw: MSD sellin Crap Still
- From: "nacelp" <nacelp@bright.net>
- Re: Fw: MSD sellin Crap Still
- From: kb4mxo <kb4mxo@mwt.net>
- Re: Fw: MSD sellin Crap Still
- From: kb4mxo <kb4mxo@mwt.net>
- Re: Fw: MSD sellin Crap Still
- Re: Fw: MSD sellin Crap Still
- From: "nacelp" <nacelp@bright.net>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: Ludis Langens <ludis@cruzers.com>
- Re: 7749 guru needed....
- From: Ludis Langens <ludis@cruzers.com>
- Re: 7749 guru needed....
- From: Ludis Langens <ludis@cruzers.com>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: Will Remaklus <remaklus@attglobal.net>
- Re: 7749 guru needed....
- From: "Green" <green@dsl.telocity.com>
- What is the dynamic range of the AFR sweeps across stoichiometric?
- From: "mike mager" <mikemager@hotmail.com>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: "nacelp" <nacelp@bright.net>
- Re: What is the dynamic range of the AFR sweeps across stoichiometric?
- From: "nacelp" <nacelp@bright.net>
- Quick question on coolant temp sensors
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Quick question on coolant temp sensors
- From: "nacelp" <nacelp@bright.net>
- ignition map
- From: John_Calabrese@ENGELHARD.COM
- Re: What is the dynamic range of the AFR sweeps across stoichiometric?
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: ignition map
- From: "nacelp" <nacelp@bright.net>
- Stupid question on fuel pressure
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: basic chevy tbi question
- From: Hotrodderzzz@aol.com
- RE: ignition map
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: ignition map
- From: John_Calabrese@ENGELHARD.COM
- Re: Driving an HEI Module with other signals
- From: Mike Veldman <vmike@email.ceat.okstate.edu>
- Re: basic chevy tbi question
- From: "nacelp" <nacelp@bright.net>
- Re: ignition map
- From: "nacelp" <nacelp@bright.net>
- Re: ignition map
- From: "nacelp" <nacelp@bright.net>
- Re: Stupid question on fuel pressure
- From: "nacelp" <nacelp@bright.net>
- Maps, and newbie stuff
- From: "nacelp" <nacelp@bright.net>
- Re: Stupid question on fuel pressure
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Quick question on coolant temp sensors
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- RE: Stupid question on fuel pressure
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Novice Question
- From: "Todd Burkard" <toddburkard@pcmc.com>
- RE: Novice Question
- From: Carl Summers <InTech@writeme.com>
- Re: Novice Question
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: Driving an HEI Module with other signals
- From: "Programmer" <nwester@eidnet.org>
- Re: Stupid question on fuel pressure
- From: Ward <WSpoonemore@excite.com>
- Re: Driving an HEI Module with other signals
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- RE: Novice Question
- From: Bob Valentine <bob@tecmark.com>
- Re: Novice Question
- From: "nacelp" <nacelp@bright.net>
- Re: Novice Question
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- RE: Novice Question
- From: Carl Summers <InTech@writeme.com>
- Re: 7749 guru needed....
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: 7749 guru needed....
- From: "Green" <green@dsl.telocity.com>
- Re: Novice Question
- From: Shannen Durphey <shannen@grolen.com>
- Re: Driving an HEI Module with other signals
- From: Ward <WSpoonemore@excite.com>
- Re: Driving an HEI Module with other signals
- From: "Programmer" <nwester@eidnet.org>
- Calpak
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: Calpak
- From: "nacelp" <nacelp@bright.net>
- RE: Novice Question
- From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
- Re: Novice Question
- From: "nacelp" <nacelp@bright.net>
- Emulator Software
- From: "Todd Burkard" <toddburkard@pcmc.com>
- RE: Novice Question
- From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
- RE: Emulator Software
- From: Eric Aos <EOA@spartek.com>
- Re: Novice Question
- From: Ludis Langens <ludis@cruzers.com>
- Re: Novice Question
- From: "nacelp" <nacelp@bright.net>
- Re: Novice Question
- From: David Cooley <n5xmt@bellsouth.net>
- EMulator checks
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Novice Question
- From: Shannen Durphey <shannen@grolen.com>
- Re: Novice Question
- From: Shannen Durphey <shannen@grolen.com>
- Knock @ 1975 RPMs
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Novice Question
- From: Pat Ford <pford@qnx.com>
- Re: Knock @ 1975 RPMs
- From: "nacelp" <nacelp@bright.net>
- Pocket Programmer & Emulator
- From: DC Smith <morepoweral@tetranet.net>
- Re: Pocket Programmer & Emulator
- Re: Pocket Programmer & Emulator
- From: DC Smith <morepoweral@tetranet.net>
- Second O2 sensor guestion
- From: "nacelp" <nacelp@bright.net>
- Re: Second O2 sensor guestion
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Pocket Programmer & Emulator
- Re: Knock @ 1975 RPMs
- From: Barry Tisdale <btisdale@cybersol.com>
- EGR
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- Re: Pocket Programmer & Emulator
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Re: EGR
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Pocket Programmer & Emulator
- From: DC Smith <morepoweral@tetranet.net>
- Re: Pocket Programmer & Emulator
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: Pocket Programmer & Emulator
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Knock @ 1975 RPMs
- From: "nacelp" <nacelp@bright.net>
- Disposable meter
- From: "nacelp" <nacelp@bright.net>
- Re: Knock @ 1975 RPMs
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Bins are us
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: Pocket Programmer & Emulator
- From: DC Smith <morepoweral@tetranet.net>
- Re: Disposable meter
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Second O2 sensor guestion
- Re: Second O2 sensor guestion
- Re: Knock @ 1975 RPMs
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: david garnier <garnierd@uwm.edu>
- Knock sensor selection for 383 SBC
- From: "Dave Zug" <dzug@delanet.com>
- Re: Knock sensor selection for 383 SBC
- From: "nacelp" <nacelp@bright.net>
- Re: Knock sensor selection for 383 SBC
- From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
- Re: EGR
- From: "Programmer" <nwester@eidnet.org>
- Re: Pocket Programmer & Emulator
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Knock sensor selection for 383 SBC
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- RE: Wastegate Controller
- From: "Michael Adams" <michaeladams1@compuserve.com>
- Turbo MAP & MAT interaction
- From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: Turbo MAP & MAT interaction
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: Will Remaklus <remaklus@attglobal.net>
- RE: Turbo MAP & MAT interaction
- From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: Knock sensor selection for 383 SBC
- From: "Dave Zug" <dzug@delanet.com>
- RE: Knock sensor selection for 383 SBC
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Turbo MAP & MAT interaction
- From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: Turbo MAP & MAT interaction
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: "nacelp" <nacelp@bright.net>
- CCC Pinout needed
- From: "nacelp" <nacelp@bright.net>
- Re: CCC Pinout needed
- From: John_Calabrese@ENGELHARD.COM
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: Will Remaklus <remaklus@attglobal.net>
- Re: Knock sensor selection for 383 SBC
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: CCC Pinout needed
- From: "nacelp" <nacelp@bright.net>
- Re: CCC Pinout needed
- eprom
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: Turbo MAP & MAT interaction
- From: "nacelp" <nacelp@bright.net>
- Re: eprom
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: CCC Pinout needed
- From: "nacelp" <nacelp@bright.net>
- Re: Turbo MAP & MAT interaction
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Turbo MAP & MAT interaction
- From: "nacelp" <nacelp@bright.net>
- Re: eprom
- From: Andrew Mattei <amattei@mindspring.com>
- 2000 RPM knock
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: Shannen Durphey <shannen@grolen.com>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: Shannen Durphey <shannen@grolen.com>
- Re: 2000 RPM knock
- From: Shannen Durphey <shannen@grolen.com>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: "nacelp" <nacelp@bright.net>
- Re: 2000 RPM knock
- From: "nacelp" <nacelp@bright.net>
- Re: 2000 RPM knock
- From: "Green" <green@dsl.telocity.com>
- Re: GMECM Digest V2 #149
- From: Dig <turbodig@yahoo.com>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: remaklus@attglobal.net
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: remaklus@attglobal.net
- Re: Turbo MAP & MAT interaction
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: GMECM Digest V2 #149
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Knock sensor selection for 383 SBC
- From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: Shannen Durphey <shannen@grolen.com>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
- manifold machining
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: manifold machining
- From: "nacelp" <nacelp@bright.net>
- Re: manifold machining
- From: Frederic Breitwieser <frederic@xephic.dynip.com>
- Re: Knock sensor selection for 383 SBC
- From: "Programmer" <nwester@eidnet.org>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: "mike mager" <mikemager@hotmail.com>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: "mike mager" <mikemager@hotmail.com>
- Sensitivity of GM Knock Sensors
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- RE: Turbo MAP & MAT interaction
- From: Webmaster <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: manifold machining
- From: "cbrooks1 " <cbrooks1@mail.tqci.net>
- Fw: Need help with Opel...
- From: "Ron Gregory" <syclone@home.com>
- Re: Pocket Programmer & Emulator
- From: DC Smith <morepoweral@tetranet.net>
- Pocket Programmer
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: Turbo MAP & MAT interaction
- From: "nacelp" <nacelp@bright.net>
- Re: manifold machining
- From: David Cooley <n5xmt@bellsouth.net>
- RE: manifold machining
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- Re: manifold machining
- From: John_Calabrese@ENGELHARD.COM
- RE: manifold machining
- From: John_Calabrese@ENGELHARD.COM
- Re: Pocket Programmer
- From: "Programmer" <nwester@eidnet.org>
- Re: manifold machining
- From: "nacelp" <nacelp@bright.net>
- Re: manifold machining
- From: "nacelp" <nacelp@bright.net>
- RE: manifold machining
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- Re: manifold machining
- From: "nacelp" <nacelp@bright.net>
- Re: manifold machining
- From: "nacelp" <nacelp@bright.net>
- RE: manifold machining
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- RE: manifold machining
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- Re: Pocket Programmer
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: Turbo MAP & MAT interaction
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Turbo MAP & MAT interaction
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Pocket Programmer
- From: "Programmer" <nwester@eidnet.org>
- Bowling for scripts:
- From: Shannen Durphey <shannen@grolen.com>
- Re: Pocket Programmer
- From: "nacelp" <nacelp@bright.net>
- ever heard of this ECM?
- From: "NickG" <nikog@mediaone.net>
- Re: ever heard of this ECM?
- From: "TK" <terryk@foothill.net>
- Re: ever heard of this ECM?
- Re: ever heard of this ECM?
- From: Ludis Langens <ludis@cruzers.com>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: LS1 Pinouts
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- RE: Turbo MAP & MAT interaction
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- RE: Turbo MAP & MAT interaction
- From: David Cooley <n5xmt@bellsouth.net>
- TurboLink [was Re: Wastegate Controller]
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- ONE WIRE O2 TO HEATED O2
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: ONE WIRE O2 TO HEATED O2
- From: "nacelp" <nacelp@bright.net>
- Re: Need help with Opel...
- From: "Swayze" <kswayze@bellsouth.net>
- Re: ONE WIRE O2 TO HEATED O2
- From: "Mike (Perth, Western Australia)" <erazmus@wantree.com.au>
- Re: Sensitivity of GM Knock Sensors
- From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
- Sensitivity of GM Knock Sensors
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: ONE WIRE O2 TO HEATED O2
- Re: ONE WIRE O2 TO HEATED O2
- From: David Cooley <n5xmt@bellsouth.net>
- Re: ONE WIRE O2 TO HEATED O2
- From: David Cooley <n5xmt@bellsouth.net>
- Re: ONE WIRE O2 TO HEATED O2
- From: Shannen Durphey <shannen@grolen.com>
- Re: ONE WIRE O2 TO HEATED O2
- From: Shannen Durphey <shannen@grolen.com>
- Re: Turbo MAP & MAT interaction
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Sensitivity of GM Knock Sensors
- From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
- RE: manifold machining
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: manifold machining
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Sensitivity of GM Knock Sensors
- From: "nacelp" <nacelp@bright.net>
- Re: Sensitivity of GM Knock Sensors
- From: "nacelp" <nacelp@bright.net>
- Re: manifold machining
- From: "mike mager" <mikemager@hotmail.com>
- Re: manifold machining
- From: "nacelp" <nacelp@bright.net>
- Sensitivity of GM Knock Sensors.
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: manifold machining
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- RE: Sensitivity of GM Knock Sensors
- From: Carl Summers <InTech@writeme.com>
- Re: manifold machining
- From: Frederic Breitwieser <frederic@xephic.dynip.com>
- Re: Sensitivity of GM Knock Sensors.
- From: "nacelp" <nacelp@bright.net>
- Re: manifold machining
- From: David Cooley <n5xmt@bellsouth.net>
- Hardware/software questions...
- From: "Steve Cauffiel" <cauffiel@erols.com>
- Re: Hardware/software questions...
- From: "nacelp" <nacelp@bright.net>
- Re: Sensitivity of GM Knock Sensors.
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Sensitivity of GM Knock Sensors
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: Sensitivity of GM Knock Sensors
- From: "nacelp" <nacelp@bright.net>
- Re: Sensitivity of GM Knock Sensors
- From: "nacelp" <nacelp@bright.net>
- Re: Hardware/software questions...
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Hardware/software questions...
- From: "Programmer" <nwester@eidnet.org>
- Sensitivity of GM Knock Sensors
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: Hardware/software questions...
- From: "Dave & Irina Eicher" <sailors@mwci.net>
- Re: Hardware/software questions...
- From: "John M. Baltz" <jmbaltz@attglobal.net>
- Re: Sensitivity of GM Knock Sensors
- From: "nacelp" <nacelp@bright.net>
- Re: Hardware/software questions...
- From: "nacelp" <nacelp@bright.net>
- Programming Voltage
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: Hardware/software questions...
- From: "Programmer" <nwester@eidnet.org>
- Digital Speedometer
- From: cwagner@info2000.net
- RE: Digital Speedometer
- From: Bob Currey <bcurrey@mediaone.net>
- Re: Digital Speedometer
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: Programming Voltage
- From: "nacelp" <nacelp@bright.net>
- Re: Digital Speedometer
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- another Memcal ?
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: another Memcal ?
- From: "nacelp" <nacelp@bright.net>
- Re: another Memcal ?
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: another Memcal ?
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: Digital Speedometer
- From: Ade + Lamb Chop <alaw@mrc.soton.ac.uk>
- 4.3L S10 questions
- From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
- Re: 4.3L S10 questions
- From: Charles Morgan <charlesmorgan@home.com>
- Re: Hardware/software questions...
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: 4.3L S10 questions
- From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
- Re: 4.3L S10 questions
- From: "nacelp" <nacelp@bright.net>
- Re: 4.3L S10 questions
- From: "EK" <sk8er@netmost.com>
- Re: 4.3L S10 questions
- Re: Pocket Programmer & Emulator
- From: "Jeff M" <tystorm@email.msn.com>
- Re: another Memcal ?
- From: Shannen Durphey <shannen@grolen.com>
- Re: Hardware/software
- From: "Steve Cauffiel" <cauffiel@erols.com>
- Re: manifold machining
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- efi chevy in a old ford
- From: "Mike" <Itsmike@lvcm.com>
- Re: another Memcal ?
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: manifold machining
- From: Frederic Breitwieser <frederic@xephic.dynip.com>
- Re: another Memcal ?
- From: "nacelp" <nacelp@bright.net>
- Re: Hardware/software
- From: "John M. Baltz" <jmbaltz@attglobal.net>
- Emulator
- From: Barry Tisdale <btisdale@cybersol.com>
- PROGRAMING QUESTION
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: Emulator
- From: "Jeff M" <tystorm@email.msn.com>
- 1228331 ECU Processor
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: 4.3L S10 questions
- From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
- Re: Quad-4 (1228707 ECM) Rough Idle Problem
- From: Rex Weatherford <rex.weatherford@mentisys.com>
- Re: 1228331 ECU Processor
- From: steve ravet <sravet@arm.com>
- 2.8 maf to ad conversion.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: Hardware/software
- From: "Programmer" <nwester@eidnet.org>
- Re: 2.8 maf to ad conversion.
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: 2.8 maf to ad conversion.
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: 2.8 maf to ad conversion.
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: 2.8 maf to ad conversion.
- Re: Hardware/software
- From: David Cooley <n5xmt@bellsouth.net>
- Re: 2.8 maf to ad conversion.
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: 1228331 ECU Processor (P4 processor info)
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: 2.8 maf to ad conversion.
- TBI to TPI Conversion
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: TBI to TPI Conversion
- RE: Emulator
- From: Carl Summers <InTech@writeme.com>
- Re: TBI to TPI Conversion
- From: Andrew Mattei <amattei@mindspring.com>
- Re: 1228331 ECU Processor (P4 processor info)
- From: steve ravet <sravet@arm.com>
- Quad 4 W41 binary file
- From: ronald.j.selberg@exgate.tek.com
- ASBX code is AMXY
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: 2.8 maf to ad conversion.
- From: Ludis Langens <ludis@cruzers.com>
- Re: Digital Speedometer
- From: cwagner@info2000.net
- Re: TBI to TPI Conversion
- From: Todd Israels <israels@mnsi.net>
- Re: TBI to TPI Conversion
- From: "nacelp" <nacelp@bright.net>
- Re: Emulator
- From: "nacelp" <nacelp@bright.net>
- Re: Hardware/software
- From: "nacelp" <nacelp@bright.net>
- Re: TBI to TPI Conversion
- From: "nacelp" <nacelp@bright.net>
- Re: 2.8 maf to ad conversion.
- From: Shannen Durphey <shannen@grolen.com>
- Emissions and Chip Burning
- From: "Craig Marcho" <marcho@global101.com>
- ECM in an Olds Bravada?
- From: "Douglas Ratcliffe" <dratclif@mail.ucf.edu>
- Re: Emissions and Chip Burning
- From: "nacelp" <nacelp@bright.net>
- Re: ECM in an Olds Bravada?
- From: Shannen Durphey <shannen@grolen.com>
- Memcal ESC Filter Numbers
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: ECM in an Olds Bravada?
- From: David Cooley <n5xmt@bellsouth.net>
- Re: ECM in an Olds Bravada?
- From: Charles Morgan <charlesmorgan@home.com>
- CarBytes v3 is to be released as EFIlive v3
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- Old code 41
- From: "nacelp" <nacelp@bright.net>
- Re: ECM in an Olds Bravada?
- From: "TK" <terryk@foothill.net>
- Re: Old code 41Handled, Thanks
- From: "nacelp" <nacelp@bright.net>
- Re: ECM in an Olds Bravada?
- From: "nacelp" <nacelp@bright.net>
- Re: Digital Speedometer
- Re: Hardware/software
- From: "Programmer" <nwester@eidnet.org>
- Re: Emissions and Chip Burning
- From: "Peter Fenske" <Peter_Fenske@bcit.ca>
- Re: Memcal ESC Filter Numbers
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- oscilloscope for windows
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Old code 41
- From: "C and T" <candt@techcom.net>
- ebay TPI system
- From: Marc Piccioni <piccioni@cadvision.com>
- 1227730 ECM on Ebay
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: Memcal ESC Filter Numbers
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: ECM in an Olds Bravada?
- Re: P4 processor info
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Programming Voltage
- From: Ludis Langens <ludis@cruzers.com>
- Re: Calpak
- From: Ludis Langens <ludis@cruzers.com>
- Re: 1228331 ECU Processor (P4 processor info)
- From: Ludis Langens <ludis@cruzers.com>
- RE: 1228331 ECU Processor (P4 processor info)
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: P4 processor info
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: ASBX code is AMXY
- From: Pat Ford <pford@qnx.com>
- Re: Quad 4 W41 binary file
- From: Will Remaklus <remaklus@attglobal.net>
- Re: ebay TPI system
- From: "Dave & Irina Eicher" <sailors@mwci.net>
- Re: ASBX code is AMXY
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: ASBX code is AMXY
- From: Pat Ford <pford@qnx.com>
- Re: ECM in an Olds Bravada?
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: CarBytes v3 is to be released as EFIlive v3
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: 2.8 maf to ad conversion.
- From: Steve Ciciora <ciciora@edison.chisp.net>
- Re: CarBytes v3 is to be released as EFIlive v3
- From: Barry Tisdale <btisdale@cybersol.com>
- free schematic software
- From: steve ravet <sravet@arm.com>
- Re: free schematic software
- From: David Cooley <n5xmt@bellsouth.net>
- Re: free schematic software
- From: David Cooley <n5xmt@bellsouth.net>
- old code 41
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Re: old code 41
- Re: ONE WIRE O2 TO HEATED O2
- From: "nacelp" <nacelp@bright.net>
- Carprom vs. Promedit
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: 1228331 ECU Processor (P4 processor info)
- From: Ludis Langens <ludis@cruzers.com>
- Re: What is the dynamic range of the AFR sweeps across stoichiometric?
- From: Ludis Langens <ludis@cruzers.com>
- Newbie
- Re: Carprom vs. Promedit
- From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
- Re: ASBX code is AMXY - memory emulator
- From: "mike mager" <mikemager@hotmail.com>
- PID B/L INT
- From: "nacelp" <nacelp@bright.net>
- Re: Emulator
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Carprom vs. Promedit
- From: "Programmer" <nwester@eidnet.org>
- Re: free schematic software
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- AED Vehicle Controller Interface and software for sale - calibration equipment
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- Turbo_P4_Doc.pdf & BKZO
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Memory Emulator (was ASBX code is AMXY)
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- RE: Updated '747 ignition info
- From: "nacelp" <nacelp@bright.net>
- *ECU FILE FOR 165
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: *ECU FILE FOR 165
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Re: *ECU FILE FOR 165
- From: "nacelp" <nacelp@bright.net>
- Re: *ECU FILE FOR 165
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: Turbo_P4_Doc.pdf & BKZO
- From: "Jeff M" <tystorm@email.msn.com>
- Re: My turn for a conversion
- From: Ludis Langens <ludis@cruzers.com>
- Re: Turbo_P4_Doc.pdf & BKZO
- From: Ludis Langens <ludis@cruzers.com>
- Re: PID B/L INT
- From: Ludis Langens <ludis@cruzers.com>
- Re: Turbo_P4_Doc.pdf & BKZO
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Turbo_P4_Doc.pdf & BKZO
- Re: *ECU FILE FOR 165
- From: "nacelp" <nacelp@bright.net>
- AZTY BCC
- From: rr <RRauscher@nni.com>
- Updated '747 ignition info
- From: rr <RRauscher@nni.com>
- Re: Turbo_P4_Doc.pdf & BKZO
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Turbo_P4_Doc.pdf & BKZO
- Re: Turbo_P4_Doc.pdf & BKZO
- From: Shannen Durphey <shannen@grolen.com>
- Re: Turbo_P4_Doc.pdf & BKZO
- From: Shannen Durphey <shannen@grolen.com>
- ECU file for '870???? Anyone? Bueller?
- From: "Craig Marcho" <marcho@flash.net>
- Re: Turbo_P4_Doc.pdf & BKZO
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Memory Emulator (was ASBX code is AMXY)
- From: "mike mager" <mikemager@hotmail.com>
- Re: *ECU FILE FOR 165
- From: "Programmer" <nwester@eidnet.org>
- Low Impedance Injector driver info
- From: Keith <kgil1@tampabay.rr.com>
- Re: Updated '747 ignition info
- From: "mike mager" <mikemager@hotmail.com>
- Re: Low Impedance Injector driver info
- Re: Low Impedance Injector driver info
- From: Shannen Durphey <shannen@grolen.com>
- (no subject)
- Re: Low Impedance Injector driver info
- From: "nacelp" <nacelp@bright.net>
- Re: Low Impedance Injector driver info
- From: "nacelp" <nacelp@bright.net>
- Re: *ECU FILE FOR 165
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- Re: Turbo_P4_Doc.pdf & BKZO
- Re: Turbo_P4_Doc.pdf & BKZO
- Re: Low Impedance Injector driver info
- PID control stategy book?
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- Re: Turbo_P4_Doc.pdf
- From: "Ron Gregory" <ron_gregory@adc.com>
- Re: Low Impedance Injector driver info
- From: Keith <kgil1@tampabay.rr.com>
- Re: Memory Emulator (was ASBX code is AMXY)
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: Low Impedance Injector driver info
- From: "Ron Gregory" <ron_gregory@adc.com>
- Re: Memory Emulator (was ASBX code is AMXY)
- From: "Swayze" <kswayze@bellsouth.net>
- Eprom???
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: Low Impedance Injector driver info
- From: "nacelp" <nacelp@bright.net>
- Re: Eprom???
- From: steve ravet <sravet@arm.com>
- Re: Eprom???
- Re: Memory Emulator (was ASBX code is AMXY)
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: Memory Emulator (was ASBX code is AMXY)
- From: "Swayze" <kswayze@bellsouth.net>
- Re: PID control stategy book?
- Re: Memory Emulator (was ASBX code is AMXY)
- From: "nacelp" <nacelp@bright.net>
- Re: Memory Emulator (was ASBX code is AMXY)
- From: "Swayze" <kswayze@bellsouth.net>
- PCM connectors
- From: "nacelp" <nacelp@bright.net>
- Re: Eprom???
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: *ECU FILE FOR 165
- From: "Todd Burkard" <toddburkard@pcmc.com>
- B/L INT Numbers
- From: "nacelp" <nacelp@bright.net>
- Re: PCM connectors
- From: Roger Heflin <rah@horizon.hit.net>
- Re: B/L INT Numbers
- From: Roger Heflin <rah@horizon.hit.net>
- Re: PCM connectors
- EFI POWWOW
- From: "nacelp" <nacelp@bright.net>
- RE: B/L INT Numbers
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: PCM connectors
- From: "nacelp" <nacelp@bright.net>
- Re: Eprom???
- RE: B/L INT Numbers
- From: Roger Heflin <rah@horizon.hit.net>
- Re: PCM connectors
- From: Jennifer Green & Scott Peitzsch <jlg-sep@mediaone.net>
- 165 to 730 conversion in F-body
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: 165 to 730 conversion in F-body
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: Eprom???
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: PCM connectors
- From: "nacelp" <nacelp@bright.net>
- Re: PCM connectors
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- RE: EFI POWWOW
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: PCM connectors
- From: "nacelp" <nacelp@bright.net>
- Re: GMECM Digest V2 #166
- From: Dig <turbodig@yahoo.com>
- RE: EFI POWWOW
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- Re: PCM connectors
- From: Andrew Mattei <amattei@mindspring.com>
- Re: EFI POWWOW
- From: "nacelp" <nacelp@bright.net>
- RE: EFI POWWOW
- From: Frederic Breitwieser <Frederic@xephic.dynip.com>
- Re: B/L INT Numbers
- Re: B/L INT Numbers
- From: Roger Heflin <rah@horizon.hit.net>
- 101
- From: "Geoff Richards" <kranky@one.net.au>
- Re: 101
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Turbo_P4_Doc.pdf & BKZO
- From: Shannen Durphey <shannen@grolen.com>
- Did I just learn something? - 8051
- From: "mike mager" <mikemager@hotmail.com>
- Re: Eprom???
- From: Shannen Durphey <shannen@grolen.com>
- LeMans EFI wiring diagram for 1227303?
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: PCM connectors
- From: Shannen Durphey <shannen@grolen.com>
- Re: 6811 Disassembler (was Memory Emulator, which was ASBX code is AMXY)
- From: Donald Whisnant <dewhisna@ix.netcom.com>
- Re: Did I just learn something? - 8051
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: Updated '747 ignition info
- From: rr <RRauscher@nni.com>
- Re: 6811 Disassembler
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: B/L INT Numbers
- From: rr <RRauscher@nni.com>
- RE: Low Impedance Injector driver info
- From: "the Fredericks" <fredericksk@worldnet.att.net>
- Vortec TPI Manifold on the way
- From: "Bob Groger" <monitorguy@mail.eagleserver.com>
- Australian ECM Wiring Diagrams
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Conversion program
- From: "Geoff Richards" <kranky@one.net.au>
- Re: Conversion program
- From: "mike mager" <mikemager@hotmail.com>
- RE: Conversion program
- From: "Geoff Richards" <kranky@one.net.au>
- Re: Vortec TPI Manifold on the way
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- Burning
- From: "black maj" <blackmin@hotmail.com>
- Re: 6811 Disassembler
- From: Donald Whisnant <dewhisna@ix.netcom.com>
- Re: Burning
- From: "nacelp" <nacelp@bright.net>
- MC68332 disassembler ?
- From: Daniel Henriksson <rotax@ludd.luth.se>
- EFI - Does it really work like that ?
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: EFI - Does it really work like that ?
- From: David Cooley <n5xmt@bellsouth.net>
- Re: EFI - Does it really work like that ?
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Burning
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Sensitivity of GM Knock Sensors
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: Sensitivity of GM Knock Sensors
- From: "nacelp" <nacelp@bright.net>
- MAF to speed density?
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: MAF to speed density?
- From: Shannen Durphey <shannen@grolen.com>
- Re: Quad 4 W41 binary file
- From: Shannen Durphey <shannen@grolen.com>
- Sensitivity of GM Knock Sensors
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: MAF to speed density?
- From: PCMdoc <PCMdoc@surfree.com>
- Re: Sensitivity of GM Knock Sensors
- From: "nacelp" <nacelp@bright.net>
- Re: PCM connectors
- From: PCMdoc <PCMdoc@surfree.com>
- Re: PCM connectors
- From: PCMdoc <PCMdoc@surfree.com>
- It's alive!
- From: rr <RRauscher@nni.com>
- adjusting fuel for gearing...
- From: "Shane Buss" <shaneb@ev1.net>
- Re: adjusting fuel for gearing...
- From: David Cooley <n5xmt@bellsouth.net>
- TBI Injector Rates
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: MC68332 disassembler ?
- From: Donald Whisnant <dewhisna@ix.netcom.com>
- Re: TBI Injector Rates
- From: "nacelp" <nacelp@bright.net>
- Sensitivity of GM Knock Sensors
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: It's alive!
- From: "mike mager" <mikemager@hotmail.com>
- Disassemblers - Generate compiler code-x's source code?
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- GM EFI parts for sale
- From: "tim ganger" <tganger@compuserve.com>
- Re: GM EFI parts for sale
- From: "nacelp" <nacelp@bright.net>
- RE: Disassemblers - Generate compiler code-x's source code?
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- RE: Disassemblers - Generate compiler code-x's source code?
- From: David Cooley <n5xmt@bellsouth.net>
- BCC's for Australian apps
- From: "Matt Tomlins" <mattpw@ozemail.com.au>
- Re: TBI Injector Rates
- From: rr <RRauscher@nni.com>
- Re: It's alive!
- From: rr <RRauscher@nni.com>
- Re: It's alive!
- From: "nacelp" <nacelp@bright.net>
- Re: It's alive!
- From: "mike mager" <mikemager@hotmail.com>
- Re: It's alive!
- From: Shannen Durphey <shannen@grolen.com>
- Re: Disassemblers - Generate compiler code-x's source code?
- From: "nacelp" <nacelp@bright.net>
- Trouble with Pocket Programmer
- From: "Jeff Kopp" <jkopp@direcpc.com>
- Re: Trouble with Pocket Programmer
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Trouble with Pocket Programmer
- From: Roger Heflin <rah@horizon.hit.net>
- Where's Winbin?
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- ZIP Cleaning
- From: "nacelp" <nacelp@bright.net>
- 30# injectors
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: Trouble with Pocket Programmer
- From: Shannen Durphey <shannen@grolen.com>
- RE: 30# injectors
- From: "Craig Marcho" <marcho@flash.net>
- generic question
- From: Ken & Rae Bauman <303print@northrim.net>
- RE: ZIP Cleaning
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: 30# injectors
- From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
- Re: 30# injectors
- From: Shannen Durphey <shannen@grolen.com>
- Re: ZIP Cleaning
- From: garwillis@msn.com (Garfield Willis)
- Re: Disassemblers - Generate compiler code-x's source code?
- From: bcurrey@pop.ce.mediaone.net
- Re: Trouble with Pocket Programmer
- From: "Edward J. Malkiewicz" <krazyed@worldnet.att.net>
- Re: Where's Winbin?
- From: "Programmer" <nwester@eidnet.org>
- Re: Disassemblers - Generate compiler code-x's source code?
- From: Donald Whisnant <dewhisna@ix.netcom.com>
- Re: generic question
- From: "mike mager" <mikemager@hotmail.com>
- Re: Trouble with Pocket Programmer
- From: DC Smith <morepoweral@tetranet.net>
- Re: ZIP Cleaning
- From: Frank F Parker <fparker@umich.edu>
- Re: Trouble with Pocket Programmer
- From: "Jeff Kopp" <jkopp@direcpc.com>
- GM EFI parts
- From: "J. T. Spilman" <jtstexas@home.com>
- Re: ZIP Cleaning
- From: "Dave & Irina Eicher" <sailors@mwci.net>
- Re: Trouble with Pocket Programmer
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Disassemblers - Generate compiler code-x's source code?
- From: David Cooley <n5xmt@bellsouth.net>
- Re: generic question
- From: David Cooley <n5xmt@bellsouth.net>
- RE: Where's Winbin?
- From: Eric Aos <EOA@spartek.com>
- FYI - More cam-less engine news
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Fuel pressure question, again
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: TBI Injector Rates
- From: Ward <WSpoonemore@excite.com>
- Re: GM EFI parts
- From: "tim ganger" <tganger@compuserve.com>
- intersting link
- From: mswayze@truswood.com (Mike Swayze)
- Re: GM EFI parts
- From: "nacelp" <nacelp@bright.net>
- Re: intersting link
- From: Squash <realsquash@yahoo.com>
- Re: intersting link
- From: Daniel Ciobota <dciobota@hiwaay.net>
- VSS
- From: "black maj" <blackmin@hotmail.com>
- Temp sensor
- From: "nacelp" <nacelp@bright.net>
- ALDL
- From: "Jeff Flanary" <jefff@mounet.com>
- RE: Temp sensor
- From: Carl Summers <InTech@writeme.com>
- Re: ALDL
- From: "nacelp" <nacelp@bright.net>
- Re: ALDL
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: 30# injectors
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Temp sensor
- From: Frank F Parker <fparker@umich.edu>
- Re: ZIP Cleaning
- From: "Programmer" <nwester@eidnet.org>
- RE: 30# injectors
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: It's alive!
- From: rr <RRauscher@nni.com>
- Re: It's alive!
- From: rr <RRauscher@nni.com>
- Re: It's alive!
- From: rr <RRauscher@nni.com>
- RE: Temp sensor
- From: "Michael Adams" <michaeladams1@compuserve.com>
- Re: Temp sensor
- Re: Temp sensor
- From: "nacelp" <nacelp@bright.net>
- Re: Temp sensor
- From: "nacelp" <nacelp@bright.net>
- Re: Temp sensor
- From: Shannen Durphey <shannen@grolen.com>
- one step back = one step up...
- From: Shannen Durphey <shannen@grolen.com>
- RE: one step back = one step up...
- From: "the Fredericks" <fredericksk@worldnet.att.net>
- vortec distributor pn 1104051
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: vortec distributor pn 1104051
- From: Shannen Durphey <shannen@grolen.com>
- Re: BCC's for Australian apps
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: vortec distributor pn 1104051
- From: "nacelp" <nacelp@bright.net>
- Re: vortec distributor pn 1104051
- From: Shannen Durphey <shannen@grolen.com>
- Re: vortec distributor pn 1104051
- From: "nacelp" <nacelp@bright.net>
- Re: Temp sensor
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: MAF to speed density?
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: MAF to speed density?
- From: Ken Kelly <kenkelly@lucent.com>
- build your own MAF???
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: build your own MAF???
- From: Ken Kelly <kenkelly@lucent.com>
- Re: Temp sensor
- From: "nacelp" <nacelp@bright.net>
- BLM cell boarder values
- From: "Dave Zug." <dzug@delanet.com>
- My Blm Question
- From: "Dave Zug." <dzug@delanet.com>
- RE: BLM cell boarder values
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: BLM cell boarder values
- From: "Dave Zug." <dzug@delanet.com>
- Re: My Blm Question
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Temp sensor
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Test please delete
- From: "turbo31 v6" <turbo31v6@hotmail.com>
- RE: vortec distributor pn 1104051
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: vortec distributor pn 1104051
- From: "nacelp" <nacelp@bright.net>
- Re: vortec distributor pn 1104051
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Turbo Tuning
- From: "turbo31 v6" <turbo31v6@hotmail.com>
- RE: Turbo Tuning
- From: "the Fredericks" <fredericksk@worldnet.att.net>
- Re: Turbo Tuning
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Turbo Tuning
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Turbo Tuning
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Turbo Tuning
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Turbo Tuning/VE
- From: "Jeff M" <tystorm@email.msn.com>
- Re: one step back = one step up...
- From: Shannen Durphey <shannen@grolen.com>
- VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Turbo Tuning/VE
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Turbo Tuning
- From: David Cooley <n5xmt@bellsouth.net>
- turbo tuning posts
- From: "NickG" <nikog@mediaone.net>
- Re: Turbo Tuning/VE
- From: "turbo31 v6" <turbo31v6@hotmail.com>
- RE: Where's Winbin?
- From: "mike mager" <mikemager@hotmail.com>
- unsubscribing
- From: "mike mager" <mikemager@hotmail.com>
- RE: vortec distributor pn 1104051
- From: Marc Piccioni <piccioni@cadvision.com>
- RE: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
- From: Carl Summers <InTech@writeme.com>
- RE: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
- From: Carl Summers <InTech@writeme.com>
- Re: turbo tuning posts
- From: Ludis Langens <ludis@cruzers.com>
- Re: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
- From: Ludis Langens <ludis@cruzers.com>
- Re: BLM cell boarder values
- From: Ludis Langens <ludis@cruzers.com>
- RE: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
- From: olbap <olbap@mail.mia.bellsouth.net>
- RE: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Turbo Tuning
- From: Scot Sealander <Sealand@clarityconnect.com>
- 16196911
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: BLM cell boarder values
- From: "Dave Zug." <dzug@delanet.com>
- Re: 16196911
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Turbo Tuning
- From: David Cooley <n5xmt@bellsouth.net>
- Re: BLM cell boarder values
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- TCC question in '165
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: BLM cell boarder values
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: vortec distributor pn 1104051
- From: "nacelp" <nacelp@bright.net>
- Wide Range O2, Throttle by wire, Cat Conv, and EGR
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- Re: TCC question in '165
- From: "nacelp" <nacelp@bright.net>
- RE: BLM cell boarder values
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- Re: BLM cell boarder values
- From: "Dave Zug." <dzug@delanet.com>
- Re: TCC question in '165
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- RE: BLM cell boarder values
- From: Roger Heflin <rah@horizon.hit.net>
- compiling/programing
- From: "Mike Rolica" <tpiguy@freewwweb.com>
- Notable stuff
- From: "nacelp" <nacelp@bright.net>
- Re: Turbo Tuning author
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Temp sensor
- From: "nacelp" <nacelp@bright.net>
- Re: BLM cell boarder values
- From: "turbo31 v6" <turbo31v6@hotmail.com>
- Re: BLM cell boarder values
- From: "nacelp" <nacelp@bright.net>
- POW WOW tenitive date
- From: "nacelp" <nacelp@bright.net>
- RE: BLM cell boarder values
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: TCC question in '165
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: BLM cell boarder values
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Turbo Tuning author
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: BLM cell boarder values
- From: "Dave Zug." <dzug@delanet.com>
- Re: BLM cell boarder values
- From: "Dave Zug." <dzug@delanet.com>
- Re: Temp sensor
- From: Mike Dillon <mdill@lsil.com>
- Re: TCC question in '165
- From: "nacelp" <nacelp@bright.net>
- Re: BLM cell boarder values
- From: "nacelp" <nacelp@bright.net>
- Re: BLM cell boarder values
- From: "Jeff M" <tystorm@email.msn.com>
- Re: BLM cell boarder values
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Temp sensor
- From: "nacelp" <nacelp@bright.net>
- Re: BLM cell boarder values
- From: "nacelp" <nacelp@bright.net>
- Re: Temp sensor
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: Temp sensor
- From: "nacelp" <nacelp@bright.net>
- Timing computations
- From: "nacelp" <nacelp@bright.net>
- RE: Temp sensor
- From: "Rudi Machilek" <Rudi@vnet.net>
- Re: Wide Range O2, Throttle by wire, Cat Conv, and EGR
- From: Shannen Durphey <shannen@grolen.com>
- Re: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
- From: Scot Sealander <Sealand@clarityconnect.com>
- AXDH0179?
- From: "TK" <terryk@foothill.net>
- Re: BLM cell boarder values
- From: Shannen Durphey <shannen@grolen.com>
- Re: AXDH0179?
- From: Shannen Durphey <shannen@grolen.com>
- Re: AXDH0179?
- From: Shannen Durphey <shannen@grolen.com>
- Re: VE#1 + VE#2 can I zero ve#2 until 3200 rpm??
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: AXDH0179?
- From: "TK" <terryk@foothill.net>
- Re: AXDH0179?
- From: "nacelp" <nacelp@bright.net>
- MAF Mess
- From: Bill Shaw <bshaw@connix.com>
- Re: Turbo Tuning
- From: "TK" <terryk@foothill.net>
- Re: AXDH0179?
- From: "TK" <terryk@foothill.net>
- Re: AXDH0179?
- Re: TCC question in '165
- From: "Programmer" <nwester@eidnet.org>
- Re: MAF Mess
- From: "Programmer" <nwester@eidnet.org>
- RE: BLM cell boarder values
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- FILTMPH
- From: Dig <turbodig@yahoo.com>
- Re: AXDH0179?
- From: "TK" <terryk@foothill.net>
- source for junkyard pulls
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Notable stuff
- From: "Swayze" <kswayze@bellsouth.net>
- Test bench
- From: "Geoff Richards" <kranky@one.net.au>
- Re: Test bench
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Notable stuff
- From: "nacelp" <nacelp@bright.net>
- Re: Notable stuff
- From: Shannen Durphey <shannen@grolen.com>
- Re: Test bench
- From: Shannen Durphey <shannen@grolen.com>
- ecm_testbench
- From: "nacelp" <nacelp@bright.net>
- Re: MAF Mess
- From: Rex Weatherford <rex.weatherford@mentisys.com>
- Re: compiling/programing
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- Re: FILTMPH
- Re: MAF Mess
- Re: Temp sensor
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- RE: TCC question in '165
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Temp sensor
- From: "Swayze" <kswayze@bellsouth.net>
- 2532 EPROM
- From: "Jeff Flanary" <jefff@mounet.com>
- RE: Notable stuff
- From: "Mike Rolica" <97005620@lambton.on.ca>
- Re: 2532 EPROM
- From: "Programmer" <nwester@eidnet.org>
- Re: BLM cell boarder values
- From: "Dave Zug." <dzug@delanet.com>
- Asynch vs Synch Injection
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Asynch vs Synch Injection
- From: "nacelp" <nacelp@bright.net>
- 2532
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: 2532
- From: "Programmer" <nwester@eidnet.org>
- Re: 2532
- From: Andrew Mattei <amattei@mindspring.com>
- Re: Asynch vs Synch Injection
- From: "Dave Zug." <dzug@delanet.com>
- Re: Asynch vs Synch Injection
- From: steve ravet <sravet@arm.com>
- Re: Asynch vs Synch Injection
- From: Ken Kelly <kenkelly@lucent.com>
- 2532
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: Asynch vs Synch Injection
- From: "Jeffrey Scott" <jws6367@mailcity.com>
- Re: Asynch vs Synch Injection
- From: "Jim Sloan" <leroy@sunflower.com>
- Re: Asynch vs Synch Injection
- Re: Asynch vs Synch Injection
- From: "Dave Zug." <dzug@delanet.com>
- Re: Asynch vs Synch Injection
- From: "Jeff M" <tystorm@email.msn.com>
- Re: TCC question in '165
- From: Shannen Durphey <shannen@grolen.com>
- Re: BLM cell boarder values
- From: Shannen Durphey <shannen@grolen.com>
- Re: Asynch vs Synch Injection
- From: Shannen Durphey <shannen@grolen.com>
- Re: Asynch vs Synch Injection
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Asynch vs Synch Injection
- From: Shannen Durphey <shannen@grolen.com>
- Re: Asynch vs Synch Injection
- From: "nacelp" <nacelp@bright.net>
- Re: Asynch vs Synch Injection
- From: "nacelp" <nacelp@bright.net>
- Re: Asynch vs Synch Injection
- From: "nacelp" <nacelp@bright.net>
- Re: VSS
- From: "black maj" <blackmin@hotmail.com>
- Re: Asynch vs Synch Injection
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: VSS
- From: "nacelp" <nacelp@bright.net>
- Re: VSS
- From: "black maj" <blackmin@hotmail.com>
- Sorry no efi, National Organ, and tissue awaremess week
- From: "nacelp" <nacelp@bright.net>
- Re: VSS
- From: "nacelp" <nacelp@bright.net>
- Re: Asynch vs Synch Injection
- RE: Sorry no efi, National Organ, and tissue awaremess week
- From: Carl Summers <InTech@writeme.com>
- Re: VSS
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Sorry no efi, National Organ, and tissue awaremess week
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Sorry no efi, National Organ, and tissue awaremess week
- From: "Thomas Matthews" <tmatthew@stny.lrun.com>
- Re: Sorry no efi, National Organ, and tissue awaremess week
- From: "Jeff M" <tystorm@email.msn.com>
- Re: VSS
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: BLM cell boarder values: ECM GUY PAGE
- From: "Dave Zug." <dzug@delanet.com>
- Re: Sorry no efi, National Organ, and tissue awaremess week
- From: "Dave Zug." <dzug@delanet.com>
- Re: VSS
- From: "black maj" <blackmin@hotmail.com>
- Re: Notable stuff
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- Re: Notable stuff
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Notable stuff
- From: Andrew Mattei <amattei@mindspring.com>
- Re: VSS
- From: "nacelp" <nacelp@bright.net>
- Turbo tuning reviesed/injectors
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Turbo tuning reviesed/injectors
- Re: Turbo tuning reviesed/injectors
- From: "Jeff M" <tystorm@email.msn.com>
- Re: VSS
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: Sorry no efi, National Organ, and tissue awaremess week
- From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
- Meter
- From: "nacelp" <nacelp@bright.net>
- Re: BLM cell boarder values: ECM GUY PAGE
- From: Shannen Durphey <shannen@grolen.com>
- Source of PCM crimp "Micro-Pack" connectors
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: FILTMPH
- From: Ludis Langens <ludis@cruzers.com>
- Odp: Source of PCM crimp "Micro-Pack" connectors
- From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
- Favorite things about these lists...
- From: "Steve Cauffiel" <cauffiel@erols.com>
- Re: Favorite things about these lists...
- From: Mike from West Australia <erazmus@wantree.com.au>
- ECM's Exchange? Can a 1227303 replace 1227165?
- From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
- Re: ECM's Exchange? Can a 1227303 replace 1227165?
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: ECM's Exchange? Can a 1227303 replace 1227165?
- From: Bob Valentine <bob@tecmark.com>
- LeMans BIN and/or wiring diagram (for 1227303)
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Sorry no efi, National Organ, and tissue awaremess week
- From: Doug Dayson <djdayson@ix.netcom.com>
- Re: VSS
- From: "black maj" <blackmin@hotmail.com>
- Re: Source of PCM crimp "Micro-Pack" connectors
- From: ron harris <harris1@execpc.com>
- Re: Source of PCM crimp "Micro-Pack" connectors
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Source of PCM crimp "Micro-Pack" connectors
- From: "nacelp" <nacelp@bright.net>
- Re: ECM's Exchange? Can a 1227303 replace 1227165?
- From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
- BLM numbers
- From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
- Re: ECM's Exchange? Can a 1227303 replace 1227165?
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Odp: Source of PCM crimp "Micro-Pack" connectors
- From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
- Newbie needs advice
- '747 IAC stuff
- From: rr <RRauscher@nni.com>
- Re: '747 IAC stuff
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Newbie needs advice
- From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
- Re: Newbie needs advice
- From: Kevin Crain <kevin@warpten.com>
- Re: BLM numbers
- From: "Dave Zug" <dzug@delanet.com>
- Re: Source of PCM crimp "Micro-Pack" connectors
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Source of PCM crimp "Micro-Pack" connectors
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- MAF sensor
- From: cwagner@info2000.net
- Re: '747 IAC stuff
- From: rr <RRauscher@nni.com>
- BUA in source form - was Re: '747 IAC stuff
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- 1227xxx --> 165, 277, 303, 752, 808, etc...
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: 1227xxx --> 165, 277, 303, 752, 808, etc...
- From: "Swayze" <kswayze@bellsouth.net>
- 1227165 solder side scan of PCB?
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: BLM numbers
- From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
- ALDL connector
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: ALDL connector
- From: "Swayze" <kswayze@bellsouth.net>
- Re: ALDL connector
- From: Andrew Mattei <amattei@mindspring.com>
- [no subject]
- From: Pat Ford <pford@qnx.com>
- Re: ALDL connector
- From: "Craig Marcho" <test@airmail.net>
- Fw: Asynch/asynch
- From: "nacelp" <nacelp@bright.net>
- '7429, first crack at it!
- From: Ernst denBroeder <ernst@employees.org>
- Re: Asynch/asynch
- From: "Swayze" <kswayze@bellsouth.net>
- Free Data Acquisition Starter Kit
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: ALDL connector
- From: Shannen Durphey <shannen@grolen.com>
- Re: Odp: Source of PCM crimp "Micro-Pack" connectors
- Re: '7429, first crack at it!
- From: "Ernst denBroeder" <ernst@employees.org>
- The Turbo Shop URL
- From: "nacelp" <nacelp@bright.net>
- Re: Fw: Asynch/asynch
- Re: The Turbo Shop URL
- From: "Mark Romans (ICQ#66838770)" <romans@pacbell.net>
- Re: ALDL connector
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Illegal Operations
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: Illegal Operations
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: GMECM Digest V2 #183
- From: "Alex Bratovic" <alexbratovic@bratspeed.com>
- RE: Illegal Operations
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: Illegal Operations
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: '7429, first crack at it!
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- RE: Illegal operation
- From: Dave Hempstead <dave_hempstead@agilent.com>
- Re: '7429, first crack at it!
- From: Ernst denBroeder <ernst@employees.org>
- Odp: Odp: Source of PCM crimp "Micro-Pack" connectors
- From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
- Crossfire Injection Question
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: Illegal Operations
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- 87 to 89 ECM
- Re: 87 to 89 ECM
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Re: Source of PCM crimp "Micro-Pack" connectors
- From: steve ravet <sravet@arm.com>
- Re: 87 to 89 ECM
- From: "nacelp" <nacelp@bright.net>
- Re: 87 to 89 ECM
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Crossfire Injection Question
- From: "nacelp" <nacelp@bright.net>
- Re: 87 to 89 ECM
- From: "nacelp" <nacelp@bright.net>
- Re: ALDL connector
- From: steve ravet <sravet@arm.com>
- 7749 question
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: 87 to 89 ECM
- From: "Ernst denBroeder" <ernst@employees.org>
- Re: 7749 question
- From: "Jim Sloan" <leroy@sunflower.com>
- Re: 87 to 89 ECM
- From: Shannen Durphey <shannen@grolen.com>
- Re: 7749 question
- From: "Green" <green@dsl.telocity.com>
- Re: BUA in source form - was Re: '747 IAC stuff
- From: rr <RRauscher@nni.com>
- EFIlive v3 is due out this weekend
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- Re: 87 to 89 ECM
- From: rr <RRauscher@nni.com>
- cal pak ID
- From: "Dave Zug" <dzug@delanet.com>
- Re: cal pak ID
- From: "nacelp" <nacelp@bright.net>
- Re: cal pak ID
- From: Shannen Durphey <shannen@grolen.com>
- Re: 87 to 89 ECM
- From: "Ernst denBroeder" <ernst@employees.org>
- Re: cal pak ID
- From: "Dave Zug" <dzug@delanet.com>
- Re: 87 to 89 ECM
- From: "Ernst denBroeder" <ernst@employees.org>
- Re: 7749 question
- From: "TK" <terryk@foothill.net>
- Re: cal pak ID
- From: Shannen Durphey <shannen@grolen.com>
- Howell TPI book on Ebay
- From: "Dave Zug" <dzug@delanet.com>
- Re: GMECM Digest V2 #181
- From: Dig <turbodig@yahoo.com>
- Re: Howell TPI book on Ebay
- From: "nacelp" <nacelp@bright.net>
- Re: cal pak ID
- From: "nacelp" <nacelp@bright.net>
- Re: Source of PCM crimp "Micro-Pack" connectors
- Help!
- From: Ernst denBroeder <ernst@employees.org>
- Re: GMECM Digest V2 #181
- From: Ludis Langens <ludis@cruzers.com>
- Re: Crossfire Injection Question
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: 1227165 solder side scan of PCB?
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- TPI 327 Timing
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: Crossfire Injection Question
- From: "nacelp" <nacelp@bright.net>
- book
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: Help!
- From: "nacelp" <nacelp@bright.net>
- Re: cal pak ID
- Re: TPI 327 Timing
- From: "nacelp" <nacelp@bright.net>
- Re: book
- Re: book
- From: "nacelp" <nacelp@bright.net>
- RedHat Linux Mentions Engine Controller in Embedded Systems PR
- From: Carl Summers <InTech@writeme.com>
- Air temps and fuel
- From: "nacelp" <nacelp@bright.net>
- Re: Illegal Operations
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: Odp: Source of PCM crimp "Micro-Pack" connectors
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: Help!
- From: rr <RRauscher@nni.com>
- '7727 on ebay $6
- From: "Dave Zug" <dzug@delanet.com>
- [no subject]
- From: Carl Summers <InTech@writeme.com>
- Re: '7727 on ebay $6
- Re: Crossfire Injection Question
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- RE: '7727 on ebay $6
- From: Carl Summers <InTech@writeme.com>
- Re: Crossfire Injection Question
- From: "nacelp" <nacelp@bright.net>
- Re: '7727 on ebay $6
- Re: '7727 on ebay $6
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: '7727 on ebay $6
- From: "Dave Zug." <dzug@delanet.com>
- ECM's
- From: "Todd Burkard" <toddburkard@pcmc.com>
- RE: ECM's
- From: Eric Aos <EOA@spartek.com>
- RE: '7727 on ebay $6
- From: Carl Summers <InTech@writeme.com>
- Re: '7727 on ebay $6
- Re: Air temps and fuel
- From: Len sabatine <sabatine@epix.net>
- [No EFI] ABS Help Needed
- From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
- Messages
- From: romans@starstream.net (Romans, Mark)
- Re: Messages
- From: Squash <realsquash@yahoo.com>
- Re: Messages
- From: "nacelp" <nacelp@bright.net>
- Re: [No EFI] ABS Help Needed
- From: Len sabatine <sabatine@epix.net>
- Re: [No EFI] ABS Help Needed
- From: "Programmer" <nwester@eidnet.org>
- Re: [No EFI] ABS Help Needed
- From: "nacelp" <nacelp@bright.net>
- Re: [No EFI] ABS Help Needed
- GM ECM to run a rotary engine
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- Re: GM ECM to run a rotary engine
- From: David Cooley <n5xmt@bellsouth.net>
- Got my Brainmaster today....
- From: "C and T" <candt@techcom.net>
- Re: [No EFI] ABS Help Needed
- From: "Programmer" <nwester@eidnet.org>
- Re: [No EFI] ABS Help Needed
- From: "Programmer" <nwester@eidnet.org>
- DirectScan "RAM Scan Tool"
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Messages
- From: romans@starstream.net (Romans, Mark)
- Re: [No EFI] ABS Help Needed
- From: Shannen Durphey <shannen@grolen.com>
- Re: [No EFI] ABS Help Needed
- From: Shannen Durphey <shannen@grolen.com>
- Re: DirectScan "RAM Scan Tool"
- From: DC Smith <morepoweral@tetranet.net>
- EFIlive v3 evaluation version is available at...
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- Re: [No EFI] ABS Help Needed
- From: Len sabatine <sabatine@epix.net>
- CATS Disassembler comments
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Another GM EFI link
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- GM ECM to run a rotary engine
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- ECM #
- From: "nacelp" <nacelp@bright.net>
- Big part sale
- From: "nacelp" <nacelp@bright.net>
- Re: ECM #
- From: rr <RRauscher@nni.com>
- Re: ECM #
- Re: ECM #
- From: rr <RRauscher@nni.com>
- Stock TPI vs Super Ram plenum volume Question
- From: romans@starstream.net (Romans, Mark)
- Re: Stock TPI vs Super Ram plenum volume Question
- From: "nacelp" <nacelp@bright.net>
- Re: Stock TPI vs Super Ram plenum volume Question
- From: romans@starstream.net (Romans, Mark)
- Re: CATS Disassembler comments
- From: Donald Whisnant <dewhisna@ix.netcom.com>
- Need help: power programming eprom
- From: "93 Formula" <red93formula@hotmail.com>
- Re: Need help: power programming eprom
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: [No EFI] ABS Help Needed
- From: Mike Turner <miketurner@ieee.org>
- Re: Need help: power programming eprom
- From: "nacelp" <nacelp@bright.net>
- Re: ECM #
- From: Shannen Durphey <shannen@grolen.com>
- Re: ECM #
- From: Shannen Durphey <shannen@grolen.com>
- Re: Need help: power programming eprom
- From: Shannen Durphey <shannen@grolen.com>
- Re: Need help: power programming eprom
- From: Bob Valentine <bob@tecmark.com>
- Re: Need help: power programming eprom
- Re: ECM #
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- Re: Need help: Thanks & Other Software
- From: "93 Formula" <red93formula@hotmail.com>
- Re: ECM #
- From: "nacelp" <nacelp@bright.net>
- Re: ECM #
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- '90 Calpaks and PROMs
- From: "TRAX" <trax@frederickmd.com>
- Re: '90 Calpaks and PROMs
- From: Roger Heflin <rah@horizon.hit.net>
- leaky injectors??
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Running a 305 with '747
- From: "Kurek, Larry" <lkurek@anl.gov>
- Re: leaky injectors??
- From: "nacelp" <nacelp@bright.net>
- Re: ECM #
- From: "nacelp" <nacelp@bright.net>
- ESC filters and Re: '90 Calpaks and PROMs
- From: Marc Randolph <mrand@pobox.com>
- Re: '90 Calpaks and PROMs
- Re: leaky injectors??
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: '90 Calpaks and PROMs
- From: "TRAX" <trax@frederickmd.com>
- Re: ECM #
- From: "Programmer" <nwester@eidnet.org>
- Home Dyno
- From: "Craig Marcho" <test@airmail.net>
- Re: 400 sbc in place of 350, 747 ecm
- From: Hotrodderzzz@aol.com
- Re: Home Dyno
- From: Doug Dayson <djdayson@home.com>
- Re: Running a 305 with '747
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: '90 Calpaks and PROMs
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Home Dyno
- From: Roger Heflin <rah@horizon.hit.net>
- Re: '90 Calpaks and PROMs
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: '90 Calpaks and PROMs
- From: "TRAX" <trax@frederickmd.com>
- Re: '90 Calpaks and PROMs
- From: Bob Valentine <bob@tecmark.com>
- Re: Home Dyno
- From: Doug Dayson <djdayson@home.com>
- 2 bar MAP on a ZR1?
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- Re: '90 Calpaks and PROMs
- From: Roger Heflin <rah@horizon.hit.net>
- RE: Running a 305 with '747
- From: "Kurek, Larry" <lkurek@anl.gov>
- Re: ESC filters
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: ECM #
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: '90 Calpaks and PROMs
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: ECM #
- From: Shannen Durphey <shannen@grolen.com>
- Re: leaky injectors??
- From: Shannen Durphey <shannen@grolen.com>
- Re: '90 Calpaks and PROMs
- From: Shannen Durphey <shannen@grolen.com>
- Re: Need help: Thanks & Other Software
- From: Shannen Durphey <shannen@grolen.com>
- Re: '90 Calpaks and PROMs
- From: "TRAX" <trax@frederickmd.com>
- Re: 400 sbc in place of 350, 747 ecm
- From: "nacelp" <nacelp@bright.net>
- Re: '90 Calpaks and PROMs
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: ECM #
- From: Shannen Durphey <shannen@grolen.com>
- Re: Running a 305 with '747
- From: Shannen Durphey <shannen@grolen.com>
- Re: 2 bar MAP on a ZR1?
- From: Tyler Townsley <ttownsley@sprynet.com>
- Re: [No EFI] ABS Help Needed
- From: Shannen Durphey <shannen@grolen.com>
- Re: [No EFI] ABS Help Needed
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- Re: Home Dyno
- From: Jason Weir <jweir@worldnet.att.net>
- Re: 400 sbc in place of 350, 747 ecm
- From: Hotrodderzzz@aol.com
- Re: ECM #
- From: rr <RRauscher@nni.com>
- Re: ECM #
- From: rr <RRauscher@nni.com>
- Re: GMECM Digest V2 #192
- From: Dig <turbodig@yahoo.com>
- Re: Running a 305 with '747
- From: Ludis Langens <ludis@cruzers.com>
- Re: ECM #
- From: "TK" <terryk@foothill.net>
- Re: '90 Calpaks and PROMs
- From: Keith <kgil1@tampabay.rr.com>
- bin uploaded
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- Re: '90 Calpaks and PROMs
- From: "TK" <terryk@foothill.net>
- Re: bin uploaded
- From: "nacelp" <nacelp@bright.net>
- Re: leaky injectors??
- From: "nacelp" <nacelp@bright.net>
- Re: leaky injectors??
- From: "nacelp" <nacelp@bright.net>
- somebody tell me what went wrong.
- From: "Craig Marcho" <marcho@flash.net>
- Re: somebody tell me what went wrong.
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Erasing EPROMs - was Re: '90 Calpaks and PROMs
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: DirectScan "RAM Scan Tool"
- From: Christian Hack <christianh@edmi.com.au>
- Re: DirectScan "RAM Scan Tool"
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- RE: 2 bar MAP on a ZR1?
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- RE: [No EFI] ABS Help Needed
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- RE: 2 bar MAP on a ZR1?
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: ECM #
- From: Shannen Durphey <shannen@grolen.com>
- Re: [No EFI] ABS Help Needed
- From: Shannen Durphey <shannen@grolen.com>
- Re: Home Dyno
- From: Rex Weatherford <rex.weatherford@mentisys.com>
- Re: bin uploaded
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- Re: DirectScan "RAM Scan Tool"
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Running a 305 with '747
- From: "Jeff Flanary" <jefff@mounet.com>
- Cold Start programming and programming for 24lb injectors
- From: "trax" <trax@frederickmd.com>
- Re: Home Dyno
- From: John_Calabrese@ENGELHARD.COM
- Re: DirectScan "RAM Scan Tool"
- Re: somebody tell me what went wrong.
- From: romans@starstream.net (Romans, Mark)
- Re: somebody tell me what went wrong.
- From: Ken Kelly <kenkelly@lucent.com>
- RE: Cold Start programming and programming for 24lb injectors
- From: Carl Summers <InTech@writeme.com>
- Re: 2 bar MAP on a ZR1?
- From: steve ravet <sravet@arm.com>
- ID 1227747
- From: Omer N Ozkul <obond@MIT.EDU>
- RE: Cold Start programming and programming for 24lb injectors
- From: "TRAX" <trax@frederickmd.com>
- Re: somebody tell me what went wrong.
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: 2 bar MAP on a ZR1?
- From: Tyler Townsley <ttownsley@sprynet.com>
- Running a 305 with '747
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: '90 Calpaks and PROMs
- From: Kevin Crain <kevin@warpten.com>
- o2 Switching extremes, '165
- From: "Dave Zug" <dzug@delanet.com>
- RE: Cold Start programming and programming for 24lb injectors
- From: Carl Summers <InTech@writeme.com>
- Re: ID 1227747
- From: Shannen Durphey <shannen@grolen.com>
- ACSP Coolant Sensor?
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: ID 1227747
- From: "Programmer" <nwester@eidnet.org>
- RE: Running a 305 with '747
- From: "Kurek, Larry" <lkurek@anl.gov>
- Re: leaky injectors??
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- RE: Cold Start programming and programming for 24lb injectors
- From: "trax" <trax@frederickmd.com>
- Re: '90 Calpaks and PROMs
- From: Roger Heflin <rah@horizon.hit.net>
- IAT Sensor
- From: "nacelp" <nacelp@bright.net>
- Dead PB-10
- From: "nacelp" <nacelp@bright.net>
- Archives seem to be down
- From: Eric Deslauriers <edeslaur@us.oracle.com>
- Re: Source of PCM crimp "Micro-Pack" connectors
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Running a 305 with '747
- From: Shannen Durphey <shannen@grolen.com>
- Re: Archives seem to be down
- From: "Swayze" <kswayze@bellsouth.net>
- blue streak 727
- From: "Swayze" <kswayze@bellsouth.net>
- Turbo V6 Tuniing continued
- From: "Jeff M" <tystorm@email.msn.com>
- Voltage MAF with 1227730
- From: Ludis Langens <ludis@cruzers.com>
- Spark Plugs....
- From: Rex Weatherford <rex.weatherford@mentisys.com>
- Re: blue streak 727
- From: "nacelp" <nacelp@bright.net>
- Re: Turbo V6 Tuniing continued
- Re: Spark Plugs....
- From: "nacelp" <nacelp@bright.net>
- Re: Turbo V6 Tuniing continued
- From: "nacelp" <nacelp@bright.net>
- Re: somebody tell me what went wrong.
- From: frels@rosharon.camco.slb.com (Mike Frels)
- Re: Spark Plugs....
- From: John_Calabrese@ENGELHARD.COM
- Re: Turbo V6 Tuniing continued
- Re: Spark Plugs....
- From: Rex Weatherford <rex.weatherford@mentisys.com>
- Re: Turbo V6 Tuniing continued
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Turbo V6 Tuniing continued
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Turbo V6 Tuniing continued
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Turbo V6 Tuning continued
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Turbo V6 Tuniing continued/Intronics Emulator update
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Turbo V6 Tuniing continued
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Archives seem to be down
- From: steve ravet <sravet@arm.com>
- Re: Spark Plugs....
- From: "Programmer" <nwester@eidnet.org>
- Re: somebody tell me what went wrong.
- From: Ken Kelly <kenkelly@lucent.com>
- Re: Turbo V6 Tuniing continued
- From: "nacelp" <nacelp@bright.net>
- Re: Spark Plugs....
- From: "nacelp" <nacelp@bright.net>
- Re: Turbo V6 Tuniing continued/Intronics Emulator update
- From: "nacelp" <nacelp@bright.net>
- Re: Turbo V6 Tuniing continued
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Turbo V6 Tuniing continued
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Spark Plugs....
- From: "nacelp" <nacelp@bright.net>
- Re: Turbo V6 Tuniing continued
- Re: Turbo V6 Tuniing continued
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Virus Warning
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Scanner sw for a '94 LT1 caprice.
- From: "Rodney Fulk" <elixir@pathwaynet.com>
- 165 ECM question, "single fire" vs "double fire"
- From: Rick Lindstedt <rick@mafb.org>
- Re: Virus Warning
- From: frels@rosharon.camco.slb.com (Mike Frels)
- Re: 165 ECM question, "single fire" vs "double fire"
- From: romans@starstream.net (Romans, Mark)
- Re: Spark Plugs....
- From: "Programmer" <nwester@eidnet.org>
- Re: 165 ECM question, "single fire" vs "double fire"
- From: Kevin Crain <kevin@warpten.com>
- Re: Scanner sw for a '94 LT1 caprice.
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: 165 ECM question, "single fire" vs "double fire"
- From: romans@starstream.net (Romans, Mark)
- RE: Scanner sw for a '94 LT1 caprice.
- From: "Rodney Fulk" <elixir@pathwaynet.com>
- Seeking '749
- From: Bill Shaw <bshaw@connix.com>
- Re: 165 ECM question, "single fire" vs "double fire"
- From: Ludis Langens <ludis@cruzers.com>
- Re: 165 ECM question, "single fire" vs "double fire"
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- 1981 Cadillac Fleetwood Brougham d'Elegance
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Turbo V6 Tuniing continued
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Spark Plugs....
- From: "nacelp" <nacelp@bright.net>
- Re: Turbo V6 Tuniing continued
- From: "TK" <terryk@foothill.net>
- Re: 165 ECM question, "single fire" vs "double fire"
- From: "nacelp" <nacelp@bright.net>
- Re: 1981 Cadillac Fleetwood Brougham d'Elegance
- From: "nacelp" <nacelp@bright.net>
- Re: 165 ECM question, "single fire" vs "double fire"
- From: "Swayze" <kswayze@bellsouth.net>
- Re: 165 ECM question, "single fire" vs "double fire"
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: 165 ECM question, "single fire" vs "double fire"
- From: "nacelp" <nacelp@bright.net>
- RE: Spark Plugs....now could be marelli computer
- From: Carl Summers <InTech@writeme.com>
- Re: 1981 Cadillac Fleetwood Brougham d'Elegance
- Re: 165 ECM question, "single fire" vs "double fire"
- Re: 1981 Cadillac Fleetwood Brougham d'Elegance
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: 1981 Cadillac Fleetwood Brougham d'Elegance
- From: Kevin Wong <brougham1@home.com>
- Re: Turbo V6 Tuniing continued
- From: Ludis Langens <ludis@cruzers.com>
- Re: Voltage MAF with 1227730
- From: "Swayze" <kswayze@bellsouth.net>
- Re: 165 ECM question, "single fire" vs "double fire"
- From: Kevin Crain <warpten@warpten.com>
- Re: Spark Plugs....
- From: Rex Weatherford <rex.weatherford@mentisys.com>
- Re: Turbo V6 Tuniing continued + Benchtop ECU
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Spark Plugs....
- From: John_Calabrese@ENGELHARD.COM
- Re: Spark Plugs....
- From: Gabe <gellett@earthlink.net>
- diacom on 95 3.1
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- Re: Spark Plugs....
- From: "nacelp" <nacelp@bright.net>
- Re: Turbo V6 Tuniing continued + Benchtop ECU
- From: "Jeff M" <tystorm@email.msn.com>
- Gal/Hr and Grm/Sec Info
- Re: diacom on 95 3.1
- From: Rex Weatherford <rex.weatherford@mentisys.com>
- Re: diacom on 95 3.1
- From: "nacelp" <nacelp@bright.net>
- Re: diacom on 95 3.1
- From: "nacelp" <nacelp@bright.net>
- Re: 165 ECM question, "single fire" vs "double fire"
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Re: diacom on 95 3.1
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- Re: diacom on 95 3.1
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- Re: Spark Plugs....
- From: John_Calabrese@ENGELHARD.COM
- Re: diacom on 95 3.1
- From: Rex Weatherford <rex.weatherford@mentisys.com>
- Re: Spark Plugs....
- From: "nacelp" <nacelp@bright.net>
- Re: 165 ECM question, "single fire" vs "double fire"
- From: Rick Lindstedt <rick@mafb.org>
- Re: Spark Plugs....
- From: Nico Over <nicomax@erols.com>
- RE: Spark Plugs....torquemasters
- From: Carl Summers <InTech@writeme.com>
- Re: Spark Plugs....torquemasters
- From: "nacelp" <nacelp@bright.net>
- Intercooler temps (again)
- From: "nacelp" <nacelp@bright.net>
- IAT / MATs
- From: "nacelp" <nacelp@bright.net>
- Re: Intercooler temps (again)
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- RE: IAT / MATs
- From: Carl Summers <InTech@writeme.com>
- Dead PB-10
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- 1981 Cadillac Fleetwood Brougham d'Elegance
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: IAT / MATs
- From: "Jim Sloan" <leroy@sunflower.com>
- Re: IAT / MATs
- From: "nacelp" <nacelp@bright.net>
- Re: Intercooler temps (again)
- From: "nacelp" <nacelp@bright.net>
- Re: 1981 Cadillac Fleetwood Brougham d'Elegance
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- RE: Spark Plugs....
- From: "Rodney Fulk" <elixir@pathwaynet.com>
- Re: Intercooler temps (again)
- Re: Intercooler temps (again)
- From: "nacelp" <nacelp@bright.net>
- Re: IAT / MATs
- From: "nacelp" <nacelp@bright.net>
- RE: Intercooler temps (again)
- From: Carl Summers <InTech@writeme.com>
- Re: Intercooler temps (again)
- Re: Intercooler temps (again)
- From: "nacelp" <nacelp@bright.net>
- Re :Intercooler/o2 volts/Injector constant
- From: Dig <turbodig@yahoo.com>
- Spark Plugs...Indexing
- From: romans@starstream.net (Romans, Mark)
- Filtmph and boost tables followup
- From: Dig <turbodig@yahoo.com>
- Re: Spark Plugs...Indexing
- From: Mike from West Australia <erazmus@wantree.com.au>
- Re: IAT / MATs
- From: Shannen Durphey <shannen@grolen.com>
- Re: Re :Intercooler/o2 volts/Injector constant
- From: Shannen Durphey <shannen@grolen.com>
- Re: Re :Intercooler/o2 volts/Injector constant
- From: Mike from West Australia <erazmus@wantree.com.au>
- Re: Re :Intercooler/o2 volts/Injector constant
- From: Barry Tisdale <btisdale@cybersol.com>
- RE: Intercooler temps (again)
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: Re :Intercooler/o2 volts/Injector constant
- From: "nacelp" <nacelp@bright.net>
- Re: Intercooler temps (again)
- From: "nacelp" <nacelp@bright.net>
- 16bit MAF xfer function in '165
- From: "NickG" <nikog@mediaone.net>
- Re: Spark Plugs...Indexing
- From: "nacelp" <nacelp@bright.net>
- Re: Intercooler temps (again)
- From: "nacelp" <nacelp@bright.net>
- Re: Re :Intercooler/o2 volts/Injector constant
- From: Scot Sealander <Sealand@clarityconnect.com>
- RE: Intercooler temps (again)
- From: Michael Hagopian <mhagopia@vt.edu>
- DIACOM Errors
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: DIACOM Errors
- From: Roger Heflin <rah@horizon.hit.net>
- Re: DIACOM Errors
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Spark Plugs...Indexing
- From: romans@starstream.net (Romans, Mark)
- Re: Spark Plugs...Indexing
- From: "nacelp" <nacelp@bright.net>
- Re: Spark Plugs....now could be marelli computer
- From: "Programmer" <nwester@eidnet.org>
- Intercooler info.
- From: "nacelp" <nacelp@bright.net>
- Re: 16bit MAF xfer function in '165
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: 16bit MAF xfer function in '165
- From: romans@starstream.net (Romans, Mark)
- Re: Gal/Hr and Grm/Sec Info
- From: Ludis Langens <ludis@cruzers.com>
- Trans Computer
- From: "Rodney Fulk" <elixir@pathwaynet.com>
- Re: 16bit MAF xfer function in '165
- From: "NickG" <nikog@mediaone.net>
- Re: 16bit MAF xfer function in '165
- From: "NickG" <nikog@mediaone.net>
- RE: Intercooler temps (again)
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Fun times. . .
- From: rr <RRauscher@nni.com>
- 16bit MAF xfer function in '165
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- New ALDL 2 transistor circuit (critique)
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- RE: New ALDL 2 transistor circuit (critique)
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: New ALDL 2 transistor circuit (critique)
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- '165 o2 switching v/s WOT level
- From: "Dave Zug." <dzug@delanet.com>
- Problem reading original EPROM
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Quad4 Update (off topic)
- From: Rex Weatherford <rex.weatherford@mentisys.com>
- Re: 2 transistor interface
- From: Dig <turbodig@yahoo.com>
- Re: Problem reading original EPROM
- From: "Patrick G. Moore" <pmoore@cmr.gov>
- Idle Learn
- From: "Jeff Flanary" <jefff@mounet.com>
- RE: Problem reading original EPROM
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: 16bit MAF xfer function in '165
- From: "Dave Zug." <dzug@delanet.com>
- Re: Fun times. . .
- From: "nacelp" <nacelp@bright.net>
- Re: Problem reading original EPROM
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Idle Learn
- From: rr <RRauscher@nni.com>
- Re: Fun times. . .
- From: rr <RRauscher@nni.com>
- Re: Problem reading original EPROM
- From: Shannen Durphey <shannen@grolen.com>
- Re: Problem reading original EPROM
- From: romans@starstream.net (Romans, Mark)
- Cheap, (But is it crap?) GM Code reader F.S.
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Cheap, (But is it crap?) GM Code reader F.S.
- From: Shawn Lin <slin01@mail.orion.org>
- Re: Cheap, (But is it crap?) GM Code reader F.S.
- From: "cbrooks1 " <cbrooks1@mail.tqci.net>
- Re: Problem reading original EPROM
- From: "Jeff Kopp" <jkopp@direcpc.com>
- Re: Idle Learn
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: Cheap, (But is it crap?) GM Code reader F.S.
- From: "93 Formula" <red93formula@hotmail.com>
- Benchtop ECU question
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Fun times. . .
- From: Ernst denBroeder <ernst@employees.org>
- First chip ready
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: First chip ready
- From: Andrew Mattei <amattei@mindspring.com>
- Re: Fun times. . .
- From: Doug Dayson <djdayson@home.com>
- RE: First chip ready
- From: "trax" <trax@frederickmd.com>
- RE: First chip ready
- From: Pat Ford <pford@qnx.com>
- Trinoic Engine Management System
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Trinoic Engine Management System
- From: "nacelp" <nacelp@bright.net>
- Re: Trinoic Engine Management System
- From: garwillis@msn.com (Garfield Willis)
- Re: first chip done
- From: "Russ Harms" <global.geolab@memlane.com>
- Re: Trinoic Engine Management System
- From: Mike from West Australia <erazmus@wantree.com.au>
- Re: Benchtop ECU question
- From: "nacelp" <nacelp@bright.net>
- Re: first chip done
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Fun times. . .
- From: "nacelp" <nacelp@bright.net>
- I/O Ports in Assembler
- From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
- Re: Problem reading original EPROM
- From: "Programmer" <nwester@eidnet.org>
- Test - Ignore
- From: "Walter Sherwin" <wsherwin@idirect.com>
- Re: Fun times. . .
- From: Shannen Durphey <shannen@grolen.com>
- Re: First chip ready
- From: Shannen Durphey <shannen@grolen.com>
- Re: First chip ready
- From: Shannen Durphey <shannen@grolen.com>
- Re: First chip ready
- From: "nacelp" <nacelp@bright.net>
- Re: First chip ready
- From: Shannen Durphey <shannen@grolen.com>
- Re: Idle Learn
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: Benchtop ECU question
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Benchtop ECU question
- From: "nacelp" <nacelp@bright.net>
- Re: First chip ready
- From: "Thomas Matthews" <tmatthew@stny.rr.com>
- Re: Fun times. . .
- From: Bob Valentine <bob@tecmark.com>
- Changing Injector Constant
- From: "93 Formula" <red93formula@hotmail.com>
- Re: I/O Ports in Assembler
- From: Ludis Langens <ludis@cruzers.com>
- Re: I/O Ports in Assembler
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- RE: First chip ready
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Problem reading original EPROM
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Changing Injector Constant
- From: DC Smith <morepoweral@tetranet.net>
- Re: Fun times. . .
- From: Ernst denBroeder <ernst@employees.org>
- Re: First chip ready
- From: "Programmer" <nwester@eidnet.org>
- ECM Bench
- From: "nacelp" <nacelp@bright.net>
- Dayton Hamvention Hamfest
- From: Steven Ciciora <ciciora@Ciciora.com>
- Burner for sale
- From: "nacelp" <nacelp@bright.net>
- Re: Dayton Hamvention Hamfest
- From: "nacelp" <nacelp@bright.net>
- 91 Pont Brain Teaser
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: 91 Pont Brain Teaser
- From: Squash <realsquash@yahoo.com>
- Re: 91 Pont Brain Teaser
- From: "Swayze" <kswayze@bellsouth.net>
- Re: 91 Pont Brain Teaser
- From: "nacelp" <nacelp@bright.net>
- Reorted O2 volts
- From: "nacelp" <nacelp@bright.net>
- Re: 91 Pont Brain Teaser
- From: Ed Stoll <edstoll2019@yahoo.com>
- Looking at Diacom
- From: "nacelp" <nacelp@bright.net>
- Looking for .bin
- From: Shannen Durphey <shannen@grolen.com>
- Re: ECM Bench
- From: Barry Tisdale <btisdale@cybersol.com>
- RE: Looking at Diacom
- From: "Matt Tomlins" <mattpw@ozemail.com.au>
- Base Pulse Widths
- From: "nacelp" <nacelp@bright.net>
- Re: ECM Bench
- From: "nacelp" <nacelp@bright.net>
- Re: Reorted O2 volts
- From: Bob Valentine <bob@tecmark.com>
- Re: Reorted O2 volts
- From: Ludis Langens <ludis@cruzers.com>
- Re: I/O Ports in Assembler
- From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
- .Bin found
- From: Shannen Durphey <shannen@grolen.com>
- Re: Reported O2 volts
- From: "nacelp" <nacelp@bright.net>
- Re: Looking at Diacom
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- EPROM won't program correctly
- From: "trax" <trax@frederickmd.com>
- Re: 91 Pont Brain Teaser
- From: Laura & Neil <neilaura@earthlink.net>
- Re: EPROM won't program correctly
- From: "Jeff Flanary" <jefff@mounet.com>
- code 13 on 89 cavalier.. 730 ecm
- From: Mike Rolica <mrolica@meridian-mag.com>
- [no subject]
- Re: code 13 on 89 cavalier.. 730 ecm
- Diacom Help
- From: Rex Weatherford <rex.weatherford@mentisys.com>
- Re: Diacom Help
- From: Kevin Crain <warpten@warpten.com>
- Re:
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Diacom Help
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Diacom Help
- From: "nacelp" <nacelp@bright.net>
- Re: Diacom Help
- From: "nacelp" <nacelp@bright.net>
- Re:
- From: "nacelp" <nacelp@bright.net>
- Re: Diacom Help
- From: Rex Weatherford <rex.weatherford@mentisys.com>
- 16141470 ECU
- From: "Scott Flanagan" <flanaj@mindspring.com>
- Re: code 13 on 89 cavalier.. 730 ecm
- Re: 16141470 ECU
- From: "nacelp" <nacelp@bright.net>
- Re:
- Re: code 13 on 89 cavalier.. 730 ecm
- From: "nacelp" <nacelp@bright.net>
- Re: EPROM won't program correctly
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: Diacom Help
- From: "Dave Zug." <dzug@delanet.com>
- Re: Diacom Help
- From: Roger Heflin <rah@horizon.hit.net>
- Re:
- Re: Diacom Help
- From: "nacelp" <nacelp@bright.net>
- Re: Diacom Help
- From: "Dave Zug." <dzug@delanet.com>
- eprom id
- From: "fat slug" <slowfatslug@hotmail.com>
- Re: eprom id
- From: steve ravet <sravet@arm.com>
- Re: Diacom Help
- From: Roger Heflin <rah@horizon.hit.net>
- DTC pop quiz
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: DTC pop quiz
- From: Ken Kelly <PCMdoc@surfree.com>
- Re: Diacom Help
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: DTC pop quiz
- From: "nacelp" <nacelp@bright.net>
- EPROM Reader Problems Deleting Chip? EMERGENCY
- From: "Scott Flanagan" <flanaj@mindspring.com>
- Re: EPROM Reader Problems Deleting Chip? EMERGENCY
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- ION Plugs
- From: romans@starstream.net (Romans, Mark)
- Problem at Ludis' site
- From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
- Re: DTC pop quiz
- From: Ludis Langens <ludis@cruzers.com>
- Re: Diacom Help
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: Problem at Ludis' site
- From: Shannen Durphey <shannen@grolen.com>
- Re: Problem at Ludis' site
- From: "nacelp" <nacelp@bright.net>
- Re: DTC pop quiz, Correction
- From: "nacelp" <nacelp@bright.net>
- Re: Problem at Ludis' site
- From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
- RE: eprom id
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: ION Plugs
- From: "Dave Zug." <dzug@delanet.com>
- RE: eprom id
- From: "fat slug" <slowfatslug@hotmail.com>
- The Physics of Racing
- From: garwillis@msn.com (Garfield Willis)
- RE: EPROM Reader Problems Deleting Chip? EMERGENCY
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Automobile Ride, Handling, and Suspension
- From: "nacelp" <nacelp@bright.net>
- Re: fuel pressure vs altitude
- From: "nacelp" <nacelp@bright.net>
- RE: EPROM Reader Problems Deleting Chip? EMERGENCY
- From: Squash <realsquash@yahoo.com>
- 7747 Spark Map ?
- From: "Marvin Johnson" <Wdnbtbldr@proaxis.com>
- Re: Automobile Ride, Handling, and Suspension
- From: garwillis@msn.com (Garfield Willis)
- Re: code 13 on 89 cavalier.. 730 ecm
- From: "Programmer" <nwester@eidnet.org>
- Re: Fw: MSD sellin Crap Still
- From: Eric Deslauriers <edeslaur@us.oracle.com>
- Scope vs reported
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: 7747 Spark Map ?
- From: rr <RRauscher@nni.com>
- ALDL Reported BPW
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Scope vs reported
- Re: Problem at Ludis' site
- From: Shannen Durphey <shannen@grolen.com>
- Quad 4 code
- From: cwagner@info2000.net
- Re: Quad 4 code
- From: Shannen Durphey <shannen@grolen.com>
- Re: Scope vs reported
- From: "nacelp" <nacelp@bright.net>
- Re: ALDL Reported BPW
- From: rr <RRauscher@nni.com>
- Re: Quad 4 code
- From: "nacelp" <nacelp@bright.net>
- Re: Quad 4 code
- From: "nacelp" <nacelp@bright.net>
- Re: Scope vs reported
- From: "nacelp" <nacelp@bright.net>
- 0-25d C MAT IAT
- From: "nacelp" <nacelp@bright.net>
- A few lt1 ?'s
- From: "Mike" <itsmike@lvcm.com>
- Re: A few lt1 ?'s
- EPROMs are programming AOK
- From: "TRAX" <trax@frederickmd.com>
- Re: ALDL Reported BPW
- Re: Scope vs reported
- Re: A few lt1 ?'s
- From: "Mike" <itsmike@lvcm.com>
- Re: EPROMs are programming AOK
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: A few lt1 ?'s
- From: Shannen Durphey <shannen@grolen.com>
- Re: EPROMs are programming AOK
- From: Shannen Durphey <shannen@grolen.com>
- TPS Style Connectors: Where to find?
- From: "Tom Meagher" <tmeagher@netropolis.net>
- Re: EPROMs are programming AOK
- From: Ludis Langens <ludis@cruzers.com>
- Re: Problem at Ludis' site
- From: Ludis Langens <ludis@cruzers.com>
- Re: TPS Style Connectors: Where to find?
- Re: A few lt1 ?'s
- PWs & misc.
- From: Roseanna Tisdale <rbt1@btc-bci.com>
- Scope vs reported + 02 as reported
- From: "nacelp" <nacelp@bright.net>
- Re: A few lt1 ?'s
- From: Ken Kelly <PCMdoc@surfree.com>
- Re: A few lt1 ?'s
- From: Len sabatine <sabatine@epix.net>
- Re: A few lt1 ?'s
- From: "Mike" <itsmike@lvcm.com>
- Injector duty cycle formula?
- From: Rex Weatherford <rweatherford@mindspring.com>
- Re: A few lt1 ?'s
- From: "Programmer" <nwester@eidnet.org>
- Re: A few lt1 ?'s
- Re: A few lt1 ?'s
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: A few lt1 ?'s
- From: "nacelp" <nacelp@bright.net>
- Re: Injector duty cycle formula?
- From: "nacelp" <nacelp@bright.net>
- Re: Injector duty cycle formula?
- From: "nacelp" <nacelp@bright.net>
- Re: Injector duty cycle formula?
- From: "David C. Allen" <davida@primenet.com>
- Re: Injector duty cycle formula?
- From: Rex Weatherford <rweatherford@mindspring.com>
- Re: Injector duty cycle formula? Graphing diagnostics
- From: "nacelp" <nacelp@bright.net>
- Re: Injector duty cycle formula? Graphing diagnostics
- From: Rex Weatherford <rweatherford@mindspring.com>
- Re: Injector duty cycle formula? Graphing diagnostics
- From: "nacelp" <nacelp@bright.net>
- RE: ecm newbie
- From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
- Re: ecm newbie
- From: "nacelp" <nacelp@bright.net>
- Re: ecm newbie
- From: "nacelp" <nacelp@bright.net>
- Re: A few lt1 ?'s
- From: "Mike" <itsmike@lvcm.com>
- Re: A few lt1 ?'s
- From: "Mike" <itsmike@lvcm.com>
- Re: A few lt1 ?'s
- ECM Code reader
- From: "Dave Zug" <dzug@delanet.com>
- Re: A few lt1 ?'s
- From: "Mike" <itsmike@lvcm.com>
- Flying Cow?
- From: garwillis@msn.com (Garfield Willis)
- Re: A few lt1 ?'s
- From: Ken Kelly <PCMdoc@surfree.com>
- Re: Scope vs reported + 02 as reported
- From: Scot Sealander <Sealand@clarityconnect.com>
- CPU Register Serial Data Readings.
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Scope vs reported + 02 as reported
- Re: TPS Style Connectors: Where to find?
- From: Squash <realsquash@yahoo.com>
- Re: Scope vs reported + 02 as reported
- From: "nacelp" <nacelp@bright.net>
- Re: A few lt1 ?'s
- From: "black maj" <blackmin@hotmail.com>
- Re: ECM Code reader
- From: "nacelp" <nacelp@bright.net>
- Re: Scope vs reported + 02 as reported
- Whatsa 2732DC?
- From: "nacelp" <nacelp@bright.net>
- Re: Scope vs reported + 02 as reported
- From: Roseanna Tisdale <rbt1@btc-bci.com>
- 7749 ECU PW musings.....
- From: Roseanna Tisdale <rbt1@btc-bci.com>
- Re: 7749 ECU PW musings.....
- From: "nacelp" <nacelp@bright.net>
- Re: A few lt1 ?'s
- From: "Mike" <itsmike@lvcm.com>
- Re: Whatsa 2732DC?
- Re: 7749 ECU PW musings.....
- From: Roseanna Tisdale <rbt1@btc-bci.com>
- Re: Whatsa 2732DC?
- From: "nacelp" <nacelp@bright.net>
- Re: EPROMs are programming AOK
- From: "TRAX" <trax@frederickmd.com>
- Re: EPROMs are programming AOK
- From: "TRAX" <trax@frederickmd.com>
- Re: EPROMs are programming AOK
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Injector duty cycle formula? Graphing diagnostics
- From: Rex Weatherford <rweatherford@mindspring.com>
- Re: A few lt1 ?'s
- From: Ken Kelly <PCMdoc@surfree.com>
- EGOR Sneek Peek
- From: garwillis@msn.com (Garfield Willis)
- Re: Injector duty cycle formula? Graphing diagnostics
- From: "nacelp" <nacelp@bright.net>
- New 4-cyl 1227727 bin
- From: Ludis Langens <ludis@cruzers.com>
- Re: 7749 ECU PW musings.....
- From: "Dave Zug" <dzug@delanet.com>
- Re: 7749 ECU PW musings.....
- Re: 7749 ECU PW musings.....
- From: "nacelp" <nacelp@bright.net>
- s2bin converter
- From: "nacelp" <nacelp@bright.net>
- Finding direction without a MAP...
- From: Shannen Durphey <shannen@grolen.com>
- Re: Finding direction without a MAP...
- From: "nacelp" <nacelp@bright.net>
- RE: Finding direction without a MAP...
- From: "Craig Marcho" <marcho@flash.net>
- Re: Finding direction without a MAP...
- From: romans@starstream.net (Romans, Mark)
- Re: A few lt1 ?'s
- From: "Mike" <itsmike@lvcm.com>
- Re: Memcal ESC Filter Numbers
- From: Ludis Langens <ludis@cruzers.com>
- Re: s2bin converter
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Memcal ESC Filter Numbers
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Finding direction without a MAP...
- From: Shannen Durphey <shannen@grolen.com>
- Re: A few lt1 ?'s
- From: Scott Peitzsch <jlg-sep@mediaone.net>
- Bin needed
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Injector duty cycle formula? Graphing diagnostics
- From: Rex Weatherford <rex.weatherford@mentisys.com>
- Re: Injector duty cycle formula? Graphing diagnostics
- From: "nacelp" <nacelp@bright.net>
- Re: Bin needed
- From: "nacelp" <nacelp@bright.net>
- Re: Injector duty cycle formula? Graphing diagnostics
- From: Rex Weatherford <rex.weatherford@mentisys.com>
- Re: Bin needed
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Bin needed
- From: "nacelp" <nacelp@bright.net>
- Re: Bin needed
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Injector duty cycle formula? Graphing diagnostics
- From: "nacelp" <nacelp@bright.net>
- Re: EPROMs are programming AOK
- From: steve ravet <sravet@arm.com>
- Re: Injector duty cycle formula? Graphing diagnostics
- From: Rex Weatherford <rex.weatherford@mentisys.com>
- Archive info
- From: Squash <realsquash@yahoo.com>
- Re: A few lt1 ?'s
- From: "nacelp" <nacelp@bright.net>
- Re: Archive info
- From: "Jim Sloan" <leroy@sunflower.com>
- Re: Archive info
- From: Squash <realsquash@yahoo.com>
- Re: Archive info
- From: Squash <realsquash@yahoo.com>
- Re: A few lt1 ?'s
- From: Jennifer Green & Scott Peitzsch <jlg-sep@mediaone.net>
- Re: A few lt1 ?'s
- From: "nacelp" <nacelp@bright.net>
- RE: Diacom Help
- From: Dave Plummer <davepl@MICROSOFT.com>
- 749 questions
- From: Bill Shaw <bshaw@connix.com>
- Re: 749 questions
- From: Shannen Durphey <shannen@grolen.com>
- ebay '727
- From: "Swayze" <kswayze@bellsouth.net>
- Re: 730 ecm
- From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
- Re: Idle Learn
- From: "Jeff M" <tystorm@email.msn.com>
- Re: 730 ecm
- From: "nacelp" <nacelp@bright.net>
- ANLX-5474 update?
- From: Mika.Helander@softbit.fi
- RE: Turbo V6 Tuniing continued/Intronics Emulator update
- From: "Rudi Machilek" <Rudi@vnet.net>
- Re: A few lt1 ?'s
- From: "Programmer" <nwester@eidnet.org>
- RE: Astro Van PCM was--->Running a 305 with '747
- From: "Kurek, Larry" <lkurek@anl.gov>
- Re: 749 questions
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Turbo V6 Tuniing continued/Intronics Emulator update/checksum
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Turbo V6 Tuniing continued
- From: "Jeff M" <tystorm@email.msn.com>
- RE: EPROMs are programming AOK
- From: "trax" <trax@frederickmd.com>
- Re: ANLX-5474 update?YES
- Piggy backing 165 ECM chips
- From: Rick Lindstedt <rick@mafb.org>
- Re: Piggy backing 165 ECM chips
- From: Roger Heflin <rah@horizon.hit.net>
- Coil Connector Question
- From: Squash <realsquash@yahoo.com>
- Re: EPROMs are programming AOK
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Coil Connector Question
- From: steve ravet <sravet@arm.com>
- Re: ANLX-5474 update?
- From: Shannen Durphey <shannen@grolen.com>
- Re: 749 questions
- From: Shannen Durphey <shannen@grolen.com>
- Re: Coil Connector Question
- From: Shannen Durphey <shannen@grolen.com>
- Re: 749 questions
- From: Bill Shaw <bshaw@connix.com>
- Re: Turbo V6 Tuniing continued/Intronics Emulator update
- From: "nacelp" <nacelp@bright.net>
- Re: 730 ecm
- From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
- EPROM Switching
- From: "nacelp" <nacelp@bright.net>
- RE: ANLX-5474 update?
- From: Mika.Helander@softbit.fi
- RE: EPROMs are programming AOK
- From: Mika.Helander@softbit.fi
- RE: ANLX-5474 update?YES
- From: Mika.Helander@softbit.fi
- Re: Coil Connector Question
- From: Ludis Langens <ludis@cruzers.com>
- Re: Astro Van PCM was--->Running a 305 with '747
- From: Ludis Langens <ludis@cruzers.com>
- Re: EPROM Switching
- From: Ludis Langens <ludis@cruzers.com>
- Re: Coil Connector Question
- From: "Jeff Flanary" <jefff@mounet.com>
- RE: Coil Connector Question
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Piggy backing 165 ECM chips
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- re: Re: Memory Emulator (was ASBX code is AMXY)
- From: "Swayze" <kswayze@bellsouth.net>
- Re: ANLX-5474 update?
- From: "nacelp" <nacelp@bright.net>
- O2 volts diacom and the 1227148
- From: "nacelp" <nacelp@bright.net>
- Delco controllers
- From: Mike from West Australia <erazmus@wantree.com.au>
- Re: Delco controllers
- From: Pat Ford <pford@qnx.com>
- Data on 16034984
- From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
- Re: Data on 16034984
- From: Ludis Langens <ludis@cruzers.com>
- Fabulous Service @ Needhams
- From: "nacelp" <nacelp@bright.net>
- Re: Fabulous Service @ Needhams
- Re: Data on 16034984
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Coil Connector Question
- From: Shannen Durphey <shannen@grolen.com>
- Re: ECM Code reader
- From: "Programmer" <nwester@eidnet.org>
- Re: Fabulous Service @ Needhams
- From: "Programmer" <nwester@eidnet.org>
- Re: Fabulous Service @ Needhams
- From: "nacelp" <nacelp@bright.net>
- Re: Fabulous Service @ Needhams
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Fabulous Service @ Needhams
- From: "nacelp" <nacelp@bright.net>
- Re: Fabulous Service @ Needhams
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Fabulous Service @ Needhams
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- .LT1 to .bin conversion
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: .LT1 to .bin conversion
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Just soo obvious
- From: "nacelp" <nacelp@bright.net>
- Fuel Injector Connector - *the MALE side* ?
- From: garwillis@msn.com (Garfield Willis)
- Re: Fuel Injector Connector - *the MALE side* ?
- Re: Fuel Injector Connector - *the MALE side* ?
- From: "nacelp" <nacelp@bright.net>
- Re: Fuel Injector Connector - *the MALE side* ?
- From: garwillis@msn.com (Garfield Willis)
- Faulty Injector - Clues
- From: "Dave Zug" <dzug@delanet.com>
- Re: Fuel Injector Connector - *the MALE side* ?
- From: Thomas McCabe <mccabet@mediaone.net>
- Re: Fuel Injector Connector - *the MALE side* ?
- From: garwillis@msn.com (Garfield Willis)
- akdx2088 vs akmh1143
- From: "Marvin Johnson" <Wdnbtbldr@proaxis.com>
- Re: Piggy backing 165 ECM chips
- From: DC Smith <morepoweral@tetranet.net>
- Re: Faulty Injector - Clues
- From: Shannen Durphey <shannen@grolen.com>
- Re: Just soo obvious
- From: Pat Ford <pford@qnx.com>
- pic of memcal
- From: Pat Ford <pford@qnx.com>
- Re: Fuel Injector Connector - *the MALE side* ?
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Faulty Injector - Clues
- From: "nacelp" <nacelp@bright.net>
- Re: Fuel Injector Connector - *the MALE side* ?
- From: garwillis@msn.com (Garfield Willis)
- Re: Fuel Injector Connector - *the MALE side* ?
- From: "Jeff M" <tystorm@email.msn.com>
- Re: .LT1 to .bin conversion
- From: Eric Clark <eclark@hoser.com>
- Re: Fuel Injector Connector - *the MALE side* ?
- From: garwillis@msn.com (Garfield Willis)
- Re: pic of memcal
- From: "Programmer" <nwester@eidnet.org>
- Nice Cheap Essential Tool for SMT work...
- From: garwillis@msn.com (Garfield Willis)
- pcm controlled nitrous
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: Fuel Injector Connector - *the MALE side* ?
- From: garwillis@msn.com (Garfield Willis)
- RE: pcm controlled nitrous
- From: Scott Parkhurst <ScottP@mcmullenargus.com>
- Suppliers
- From: garwillis@msn.com (Garfield Willis)
- Re: Fuel Injector Connector - *the MALE side* ?
- From: Len sabatine <sabatine@epix.net>
- Re: Fuel Injector Connector - *the MALE side* ?
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: Fuel Injector Connector - *the MALE side* ?
- From: garwillis@msn.com (Garfield Willis)
- RE: P&H Injector Interface
- From: Eric Aos <EOA@spartek.com>
- Re: Suppliers
- From: "Jeff M" <tystorm@email.msn.com>
- Re: P&H Injector Interface/Accel VIC
- From: "Jeff M" <tystorm@email.msn.com>
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Re: Fuel Injector Connector - *the MALE side* ?
- From: "nacelp" <nacelp@bright.net>
- Re: Suppliers
- From: "C. Brooks" <cbrooks1@tqci.net>
- CSH, HQ closed for a few days
- From: "nacelp" <nacelp@bright.net>
- Re: P&H Injector Interface
- From: "Swayze" <kswayze@bellsouth.net>
- Re: CSH, HQ closed for a few days
- From: "Swayze" <kswayze@bellsouth.net>
- Re: P&H Injector Interface
- From: Len sabatine <sabatine@epix.net>
- Re: Suppliers
- From: "nacelp" <nacelp@bright.net>
- Re: CSH, HQ closed for a few days
- Re: Fuel Injector Connector - *the MALE side* ?
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: Len sabatine <sabatine@epix.net>
- Re: Fuel Injector Connector - *the MALE side* ?
- From: "Patrick G. Moore" <pmoore@cmr.gov>
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Not as OT as it might seem :)
- From: Eric Aos <EOA@spartek.com>
- Re: Fuel Injector Connector - *the MALE side* ?
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- Re: Suppliers fyresleeving
- From: "Jeff M" <tystorm@email.msn.com>
- Re: CSH, HQ closed for a few days
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: Fuel Injector Connector - *the MALE side* ?
- From: garwillis@msn.com (Garfield Willis)
- Re: Fuel Injector Connector - *the MALE side* ?
- From: Frank F Parker <fparker@umich.edu>
- Flash mis-wring
- From: "TK" <terryk@foothill.net>
- Re: Suppliers fyresleeving
- From: "Dave Zug" <dzug@delanet.com>
- Re: Fabulous Service @ Needhams
- From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
- Re: Fabulous Service @ Needhams
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: Fabulous Service @ Needhams
- From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
- Re: pic of memcal
- From: Shawn Lin <slin01@mail.orion.org>
- Re: CSH, HQ closed for a few days
- Re: CSH, HQ closed for a few days
- From: "Dave Zug" <dzug@delanet.com>
- Re: Suppliers fyresleeving
- From: "Swayze" <kswayze@bellsouth.net>
- Re: CSH, HQ closed for a few days
- From: Barry Tisdale <btisdale@cybersol.com>
- RE: pcm controlled nitrous
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: pcm controlled nitrous
- From: "nacelp" <nacelp@bright.net>
- Re: Suppliers fyresleeving
- From: "Jeff M" <tystorm@email.msn.com>
- Prom Carriers
- From: "nacelp" <nacelp@bright.net>
- Re: Suppliers fyresleeving
- From: "Jeff M" <tystorm@email.msn.com>
- Re: P&H Injector Interface
- From: "Swayze" <kswayze@bellsouth.net>
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Re: P&H Injector Interface
- From: romans@starstream.net (Romans, Mark)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Chip upgrades
- Re: P&H Injector Interface
- From: Len sabatine <sabatine@epix.net>
- Re:Prom Carriers
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: romans@starstream.net (Romans, Mark)
- Re: P&H Injector Interface
- From: Len sabatine <sabatine@epix.net>
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Re: P&H Injector Interface
- From: Laura & Neil <neilaura@earthlink.net>
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Re: P&H Injector Interface
- From: Len sabatine <sabatine@epix.net>
- coil repair harness #'s
- From: Shannen Durphey <shannen@grolen.com>
- Re: P&H Injector Interface
- From: Shannen Durphey <shannen@grolen.com>
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: coil repair harness #'s
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: Prom Carriers
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Back to Diacom
- From: "nacelp" <nacelp@bright.net>
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Software and ALDL
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- EFIlive & SyTys
- From: Barry Tisdale <btisdale@cybersol.com>
- Convert 6 cyl tacho for use with 4 cyl
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Software and ALDL
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- P&H Injector Interface
- From: romans@starstream.net (Romans, Mark)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Re: Software and ALDL
- From: "nacelp" <nacelp@bright.net>
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Re: Software and ALDL
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: Apologies
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- request for ecu.files
- From: "dkubus" <dkubus@kki.net.pl>
- PD: request for ecu.files
- From: "dkubus" <dkubus@kki.net.pl>
- Simulator error??
- From: Shannen Durphey <shannen@grolen.com>
- Re: Convert 6 cyl tacho for use with 4 cyl
- From: "black maj" <blackmin@hotmail.com>
- Re: Convert 6 cyl tacho for use with 4 cyl
- From: Shawn Lin <slin01@mail.orion.org>
- Re: Convert 6 cyl tacho for use with 4 cyl
- From: "black maj" <blackmin@hotmail.com>
- Re: Convert 6 cyl tacho for use with 4 cyl
- From: Shawn Lin <slin01@mail.orion.org>
- Re: Convert 6 cyl tacho for use with 4 cyl
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: Simulator error??
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: P&H Injector Interface
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Re: P&H Injector Interface
- From: "Swayze" <kswayze@bellsouth.net>
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Re: Convert 6 cyl tacho for use with 4 cyl
- From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
- Re: P&H Injector Interface
- From: "Swayze" <kswayze@bellsouth.net>
- Re: P&H Injector Interface
- From: "nacelp" <nacelp@bright.net>
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- DataStream Definition
- From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
- Re: Convert 6 cyl tacho for use with 4 cyl
- From: Ludis Langens <ludis@cruzers.com>
- re; p&h injector driver
- RE: Convert 6 cyl tacho for use with 4 cyl
- From: "Scott Feaver" <scott@j-body.com>
- Re: re; p&h injector driver
- From: "nacelp" <nacelp@bright.net>
- Re: re; p&h injector driver
- From: Shannen Durphey <shannen@grolen.com>
- Re: re; p&h injector driver
- From: garwillis@msn.com (Garfield Willis)
- Re: Convert 6 cyl tacho for use with 4 cyl
- From: "TK" <terryk@foothill.net>
- RE: re; p&h injector driver
- From: Carl Summers <InTech@writeme.com>
- Is this a good deal?
- From: Bob Valentine <bob@tecmark.com>
- Re: Convert 6 cyl tacho for use with 4 cyl
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: Is this a good deal?
- From: "nacelp" <nacelp@bright.net>
- Is this a good deal?
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: Is this a good deal?
- From: Squash <realsquash@yahoo.com>
- Re: Is this a good deal?
- Re: Is this a good deal?
- From: Squash <realsquash@yahoo.com>
- Re: Is this a good deal?
- Re: Is this a good deal?
- From: Matt S Bower <m.s.bower@cummins.com>
- tbi size
- ecu files
- From: "dkubus" <dkubus@kki.net.pl>
- Re: Is this a good deal?
- From: bearbvd@cmn.net (Greg Hermann)
- RE: Is this a good deal?
- From: Mike Rolica <mrolica@meridian-mag.com>
- Injectors: P&H and SAT - Part 1
- From: garwillis@msn.com (Garfield Willis)
- Re: Injectors: P&H and SAT - Part 1
- From: "Swayze" <kswayze@bellsouth.net>
- Injectors: P&H and SAT - Part 2
- From: garwillis@msn.com (Garfield Willis)
- Re: Injectors: P&H and SAT - Part 1
- From: garwillis@msn.com (Garfield Willis)
- Injectors: P&H and SAT - Part 3
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: P&H Injector Interface
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Injectors: P&H and SAT - Part 4
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: "Swayze" <kswayze@bellsouth.net>
- Re: P&H Injector Interface
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: P&H Injector Interface
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Injectors: P&H and SAT - Part 4
- From: Len sabatine <sabatine@epix.net>
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Need help understanding Fuel tables.
- From: "Kevin Reynolds" <kereyn@gte.net>
- '87 Vette .bin needed
- From: "NickG" <nikog@mediaone.net>
- Re: '87 Vette .bin needed
- From: Aaron G Kallotte <akallotte@juno.com>
- Re: '87 Vette .bin needed
- From: "Jeff Kopp" <superchevyparts@mindspring.com>
- New Member to List: Heads-Up Display Q's
- From: Dan Gentry <dang@seanet.com>
- Re: Injector driver
- Re: Need help understanding Fuel tables.
- From: rr <RRauscher@nni.com>
- Re: Need help understanding Fuel tables.
- From: olbap <olbap@mail.mia.bellsouth.net>
- Im going CRAZY, WOT tuning is being a bastard! Running out offuel
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
- RE: Heads up display
- From: Dave Hempstead <dave_hempstead@agilent.com>
- Re: P&H Injector Interface
- From: "Swayze" <kswayze@bellsouth.net>
- Chip ID
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
- From: Ernst denBroeder <ernst@employees.org>
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
- From: Len sabatine <sabatine@epix.net>
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
- From: olbap <olbap@mail.mia.bellsouth.net>
- Underhood Temperatures
- From: garwillis@msn.com (Garfield Willis)
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
- From: Len sabatine <sabatine@epix.net>
- RE: Im going CRAZY, WOT tuning is being a bastard! Running outoff uel
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Underhood Temperatures
- From: "Swayze" <kswayze@bellsouth.net>
- Re: P&H Injector Interface - the "Package"?
- From: garwillis@msn.com (Garfield Willis)
- RE: Im going CRAZY, WOT tuning is being a bastard! Running outoffuel
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Im going CRAZY, WOT tuning is being a bastard! Running outoffuel
- From: Gabe <gellett@earthlink.net>
- Re: Need help understanding Fuel tables.
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
- From: Len sabatine <sabatine@epix.net>
- RE: Im going CRAZY, WOT tuning is being a bastard! Runningoutoffu el
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Underhood Temperatures
- From: garwillis@msn.com (Garfield Willis)
- RE: Need help understanding Fuel tables.
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
- From: olbap <olbap@mail.mia.bellsouth.net>
- RE: Im going CRAZY, WOT tuning is being a bastard! Runningoutoffuel
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: P&H Injector Interface - the "Package"?
- From: "Swayze" <kswayze@bellsouth.net>
- RE: Im going CRAZY, WOT tuning is being a bastard! Running outoffuel
- From: Len sabatine <sabatine@epix.net>
- Re: Im going CRAZY, WOT tuning is being a bastard! Running out offuel
- From: Len sabatine <sabatine@epix.net>
- RE: Im going CRAZY, WOT tuning is being a bastard! Running outoffuel
- From: olbap <olbap@mail.mia.bellsouth.net>
- fuel pump info
- From: steve ravet <sravet@arm.com>
- Re: fuel pump info
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: "Walter Sherwin" <wsherwin@home.com>
- Fuel, Fuel, Fuel... why dont I have enough
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Heads up display
- From: Dan Gentry <dang@seanet.com>
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Another VSS question
- From: "John D. Bachman" <jdbachman@redrose.net>
- RE: Another VSS question
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Heads up display
- From: Dan Gentry <dang@seanet.com>
- Re: Heads up display
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Got some new injectors! Best way to rescale?>
- From: olbap <olbap@mail.mia.bellsouth.net>
- Let me clarify on my last injector post
- From: olbap <olbap@mail.mia.bellsouth.net>
- [Fwd: DIY_EFI_WWW]
- From: steve ravet <sravet@arm.com>
- Re: Heads up display
- From: Dan Gentry <dang@seanet.com>
- Re: Fuel, Fuel, Fuel... why dont I have enough
- From: John_Calabrese@ENGELHARD.COM
- cts
- From: Omer N Ozkul <obond@MIT.EDU>
- Re: Got some new injectors! Best way to rescale?>
- Re: Heads up display
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: Heads up display
- From: Ken Kelly <PCMdoc@surfree.com>
- Re: Heads up display
- From: Dan Gentry <dang@seanet.com>
- Re: Heads up display
- From: "TK" <terryk@foothill.net>
- Re: Heads up display
- From: "TK" <terryk@foothill.net>
- Bigger injectors didnt fix it :(
- From: olbap <olbap@mail.mia.bellsouth.net>
- RE: Heads up display
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Heads up display
- From: Dan Gentry <dang@seanet.com>
- Re: Heads up display
- GM Trip Computer
- From: "Scott Feaver" <scott@j-body.com>
- Re: Heads up display
- From: Ken Kelly <PCMdoc@surfree.com>
- Re: cts mounting -
- Re: Heads up display
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: GM Trip Computer
- From: "TK" <terryk@foothill.net>
- '165 switching both fans from the ECM?
- From: Kevin Crain <kevin@warpten.com>
- Re: '165 switching both fans from the ECM?
- From: Shannen Durphey <shannen@grolen.com>
- Re: '165 switching both fans from the ECM?
- From: Kevin Crain <kevin@warpten.com>
- Re: cts
- From: Shannen Durphey <shannen@grolen.com>
- Re: '165 switching both fans from the ECM?
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: '165 switching both fans from the ECM?
- From: Shannen Durphey <shannen@grolen.com>
- Re: Is this a good deal?
- From: "nacelp" <nacelp@bright.net>
- RE: GM Trip Computer
- From: "Scott Feaver" <scott@j-body.com>
- Re: cts
- From: "nacelp" <nacelp@bright.net>
- Re: GM Trip Computer
- From: "TK" <terryk@foothill.net>
- Re: Heads up display
- From: Ludis Langens <ludis@cruzers.com>
- Re: Injector driver
- From: Ludis Langens <ludis@cruzers.com>
- Re: '165 switching both fans from the ECM?
- From: Kevin Crain <kevin@warpten.com>
- Re: '165 switching both fans from the ECM?
- From: Shannen Durphey <shannen@grolen.com>
- Re: '165 switching both fans from the ECM?
- From: Kevin Crain <kevin@warpten.com>
- Re: Is this a good deal?
- From: "nacelp" <nacelp@bright.net>
- Re: Injector driver
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Chip ID
- From: "nacelp" <nacelp@bright.net>
- re;re;P&H injector interface
- From: "Swayze" <kswayze@bellsouth.net>
- Re: '87 Vette .bin needed
- From: "nacelp" <nacelp@bright.net>
- Re: re;re;P&H injector interface
- From: "nacelp" <nacelp@bright.net>
- Re: P&H Injector Interface
- From: garwillis@msn.com (Garfield Willis)
- Re: '165 switching both fans from the ECM?
- From: Kevin Crain <kevin@warpten.com>
- Re: '165 switching both fans from the ECM?
- From: Kevin Crain <kevin@warpten.com>
- Re: '165 switching both fans from the ECM?
- From: Kevin Crain <kevin@warpten.com>
- Re: '165 switching both fans from the ECM?
- From: "David C. Allen" <davida@primenet.com>
- Re: Bigger injectors didnt fix it :(
- From: Glen Beard <gbeard1@nycap.rr.com>
- alfa turbo using gm
- From: Peter Gargano <turboalfa@excite.com>
- Re: alfa turbo using gm
- From: Peter Gargano <peter@techedge.com.au>
- Re: '165 switching both fans from the ECM?
- From: Kevin Crain <kevin@warpten.com>
- Re: '165 switching both fans from the ECM?
- From: Peter Gargano <peter@techedge.com.au>
- Re: '165 switching both fans from the ECM?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: P&H Injector Interface - Wiring Approach
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: cts
- From: Omer N Ozkul <obond@MIT.EDU>
- Re: cts
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Bigger injectors didnt fix it :(
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: P&H Injector Interface - Wiring Approach
- From: garwillis@msn.com (Garfield Willis)
- EGT
- From: "Dave Zug" <dzug@delanet.com>
- Re: P&H Injector Interface - Wiring Approach
- From: "Swayze" <kswayze@bellsouth.net>
- Re: EGT
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: P&H Injector Interface - Wiring Approach
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '165 switching both fans from the ECM?
- From: Shannen Durphey <shannen@grolen.com>
- Re: EGT
- From: "Dave Zug" <dzug@delanet.com>
- Re: '165 switching both fans from the ECM?
- From: Peter Gargano <peter@techedge.com.au>
- Re: Bigger injectors didnt fix it :(
- From: "Rob Higgins" <rhiggins@cavva.com.au>
- Re: Bigger injectors didnt fix it :(
- From: Len sabatine <sabatine@epix.net>
- Re: Bigger injectors didnt fix it :(
- Re: Bigger injectors didnt fix it / injector sizing
- Re: EGT
- Re: EGT
- Re: Bigger injectors didnt fix it / injector sizing
- From: "Bruce Plecan" <nacelp@bright.net>
- Intro
- From: Oliver Scholz <luke@dagobah.franken.de>
- Stumped at CSH, HQ
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Stumped at CSH, HQ
- From: Bob Valentine <bob@tecmark.com>
- Re: Stumped at CSH, HQ
- Re: Stumped at CSH, HQ
- Re: Stumped at CSH, HQ
- From: Len sabatine <sabatine@epix.net>
- Re: '165 switching both fans from the ECM?
- From: Shannen Durphey <shannen@grolen.com>
- Another Intro
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: EGT
- From: "Dave Zug" <dzug@delanet.com>
- Re: Stumped at CSH, HQ
- From: "Dave Zug" <dzug@delanet.com>
- Re: Got some new injectors! Best way to rescale?>
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: Got some new injectors! Best way to rescale?>
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Another Intro
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: GM Trip Computer
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850
- From: olbap <olbap@mail.mia.bellsouth.net>
- RE: VSS Questions
- From: "John D. Bachman" <jdbachman@redrose.net>
- RE: Stumped at CSH, HQ
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: VSS Questions
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: VSS Questions
- From: John Bachman <jdbachman@redrose.net>
- RE: VSS Questions
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: GM Trip Computer
- From: "Scott Feaver" <scott@j-body.com>
- Re: Stumped at CSH, HQ
- From: Eric Clark <eclark@hoser.com>
- Low O2 readings in Diacom at WOT.... please help!
- From: "Craig Marcho" <test@airmail.net>
- Re: Low O2 readings in Diacom at WOT.... please help!
- From: "Bruce Plecan" <nacelp@bright.net>
- 749 for sale
- From: cwagner@info2000.net
- When to swap injectors
- From: "trax" <trax@frederickmd.com>
- RE: Low O2 readings in Diacom at WOT.... please help!
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Low O2 readings in Diacom at WOT.... please help!
- From: "Craig Marcho" <test@airmail.net>
- Re: When to swap injectors
- From: John_Calabrese@ENGELHARD.COM
- RE: When to swap injectors
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Low O2 readings in Diacom at WOT.... please help!
- From: rr <RRauscher@nni.com>
- Re: Low O2 readings in Diacom at WOT.... please help!
- From: "Jeff M" <tystorm@email.msn.com>
- Two barrel TBI must have a flaw, I give up.
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850
- From: "Kevin Reynolds" <kereyn@gte.net>
- Re: UPDATE, Swapped to carb to rule out ignition.. and pseudo-intro..
- Re: UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850
- Re: Two barrel TBI must have a flaw, I give up.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: UPDATE, Swapped to carb to rule out ignition.. and pseudo-intro..
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: UPDATE, Swapped to carb to rule out ignition.. and pseudo-intro..
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Two barrel TBI must have a flaw, I give up.
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Low O2 readings in Diacom at WOT.... please help!
- From: Shannen Durphey <shannen@grolen.com>
- Re: UPDATE, Swapped to carb to rule out ignition.. and pseudo-intro..
- Re: GM Trip Computer
- From: "TK" <terryk@foothill.net>
- Re: Two barrel TBI must have a flaw, I give up.
- From: rr <RRauscher@nni.com>
- Fuel Trim Cell 18???
- From: Jody Shapiro <jshapiro@netgate.net>
- Re: Two barrel TBI must have a flaw, I give up.
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Got some new injectors! Best way to rescale?>
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Two barrel TBI must have a flaw, I give up.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Two barrel TBI must have a flaw, I give up.
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Got some new injectors! Best way to rescale?>
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: UPDATE, Swapped to carb to rule out ignition.. and pseudo-intro..
- From: "Bruce Plecan" <nacelp@bright.net>
- Knock sensor woes
- From: D Kunnath <djktno@engin.umich.edu>
- Re: Two barrel TBI must have a flaw, I give up.
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Two barrel TBI must have a flaw, I give up.
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Low O2 readings in Diacom at WOT.... please help!
- From: romans@starstream.net (Romans, Mark)
- Subject: Re: UPDATE, Swapped to carb to rule out ignition.. Holley 4160 - 1850
- From: "Marvin Johnson" <Wdnbtbldr@proaxis.com>
- Re: Knock sensor woes
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Two barrel TBI must have a flaw, I give up.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Two barrel TBI must have a flaw, I give up.
- From: Bob Valentine <bob@tecmark.com>
- Re: Two barrel TBI must have a flaw, I give up.
- From: rr <RRauscher@nni.com>
- RE: UPDATE, Swapped to carb to rule out ignition.. and pseudo-int ro..
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Two barrel TBI must have a flaw, I give up
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: Fuel Trim Cell 18???
- From: Glen Beard <gbeard1@nycap.rr.com>
- Re: Fuel Trim Cell 18???
- From: Roger Heflin <rah@horizon.hit.net>
- Injector Duty Cycle
- From: "trax" <trax@frederickmd.com>
- Re: Injector Duty Cycle
- From: Ken Kelly <kenkelly@lucent.com>
- Re: GMECM Digest V2 #245
- Re: Two barrel TBI must have a flaw, I give up.
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: GMECM Digest V2 #245
- From: steve ravet <sravet@arm.com>
- Injector flow
- From: cwagner@info2000.net
- Re: Two barrel TBI must have a flaw, I give up.
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- RE: Injector Duty Cycle
- From: "trax" <trax@frederickmd.com>
- RE: Injector Duty Cycle
- From: "J. T. Spilman" <jtstexas@home.com>
- Re: Two barrel TBI must have a flaw, I give up.
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: 749 for sale
- From: Keith <kgil1@tampabay.rr.com>
- Re: Two barrel TBI must have a flaw, I give up.
- From: Len Sabatine <sabatine@epix.net>
- TPI injectors for sale
- From: Marc Piccioni <piccioni@cadvision.com>
- TPI injectors for sale
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: Two barrel TBI must have a flaw, I give up.
- From: "Bruce Plecan" <nacelp@bright.net>
- References for Bosch Injection system and Direct injection system
- From: SiregarAbdi@tpj.co.id
- References of Direct and indirect injection system for gasoline and diesel engine
- From: SiregarAbdi@tpj.co.id
- Re: Two barrel TBI must have a flaw, I give up.
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Injector Duty Cycle
- From: "Dave Zug" <dzug@delanet.com>
- Re: Injector Duty Cycle
- From: "Bruce Plecan" <nacelp@bright.net>
- Heat crazed mad scientist
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: Heat crazed mad scientist
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Injector Duty Cycle ... have data ... need advice
- From: "TRAX" <trax@frederickmd.com>
- Re: Two barrel TBI must have a flaw, I give up.
- From: rr <RRauscher@nni.com>
- Re: Two barrel TBI must have a flaw, I give up.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Two barrel TBI must have a flaw, I give up.
- From: rr <RRauscher@nni.com>
- Re: Heat crazed mad scientist
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Heat crazed mad scientist
- From: "Dave Zug" <dzug@delanet.com>
- Re: Heat crazed mad scientist
- From: "Dave Zug" <dzug@delanet.com>
- Re: Two barrel TBI must have a flaw, I give up.
- From: Shannen Durphey <shannen@grolen.com>
- Re: Heat crazed mad scientist
- From: "Dave Zug" <dzug@delanet.com>
- Re: Injector Duty Cycle ... have data ... need advice
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Heat crazed mad scientist
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: Injector Duty Cycle ... have data ... need advice
- From: "Dave Zug" <dzug@delanet.com>
- Re: Two barrel TBI must have a flaw, I give up.
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Two barrel TBI must have a flaw, I give up.
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Injector Duty Cycle
- From: Ken Kelly <PCMdoc@surfree.com>
- Re: Two barrel TBI must have a flaw, I give up.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Two barrel TBI must have a flaw, I give up.
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Injector Duty Cycle ... have data ... need advice
- From: "TRAX" <trax@frederickmd.com>
- Re: Injector Duty Cycle ... have data ... need advice
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Two barrel TBI must have a flaw, I give up.
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- mopar conversion.mpfi using gmecm
- From: Mike Rolica <mrolica@meridian-mag.com>
- IAT range
- From: "Marc Ethier" <maethier@virtuel.collegebdeb.qc.ca>
- Re: Two barrel TBI must have a flaw, I give up.
- Re: Two barrel TBI must have a flaw, I give up.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Two barrel TBI must have a flaw, I give up.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Heat crazed mad scientist
- From: "SPECTRO COATING CORP." <spectro@ma.ultranet.com>
- Re: IAT range
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: IAT range
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Heat crazed mad scientist
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: Two barrel TBI must have a flaw, I give up.
- From: Len Sabatine <sabatine@epix.net>
- Re: Injector Duty Cycle
- From: "Dave Zug." <dzug@delanet.com>
- Re: Two barrel TBI must have a flaw, I give up.
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Two barrel TBI must have a flaw, I give up.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: IAT range
- From: "Bruce Plecan" <nacelp@bright.net>
- That a joke
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: That a joke
- RE: That a joke
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: That a joke
- From: "Bruce Plecan" <nacelp@bright.net>
- 1998 4L60E & ECM
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: Two barrel TBI must have a flaw, I give up.
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- Re: IAT range
- From: General Motors <a1227ecm@yahoo.com>
- Re: That a joke
- From: Shannen Durphey <shannen@grolen.com>
- Re: 1998 4L60E & ECM
- Re: That a joke
- Re: That a joke
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: IAT range
- From: "Marc Ethier" <maethier@virtuel.collegebdeb.qc.ca>
- Re: IAT range
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: IAT range
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: IAT range
- From: Len Sabatine <sabatine@epix.net>
- Re: IAT range
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: IAT range
- From: Len Sabatine <sabatine@epix.net>
- Re: IAT range
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Knock sensor woes
- From: "Programmer" <nwester@eidnet.org>
- Re: Heat crazed mad scientist
- From: "Programmer" <nwester@eidnet.org>
- Re: IAT range
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Heat crazed mad scientist
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Heat crazed mad scientist
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: IAT range
- From: "Marc Ethier" <maethier@virtuel.collegebdeb.qc.ca>
- Re: Heat crazed mad scientist
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: IAT range
- From: "Bruce Plecan" <nacelp@bright.net>
- Fw: gas
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: That a joke
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: IAT range
- From: "Marc Ethier" <maethier@virtuel.collegebdeb.qc.ca>
- Re: IAT range
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Fw: gas
- Re: That a joke
- Re: IAT range
- Re: IAT range
- From: "Bruce Plecan" <nacelp@bright.net>
- gas Grumpy rant
- From: "Bruce Plecan" <nacelp@bright.net>
- 4.6L Ford MAF was Re: Heat crazed mad scientist
- From: sswayze@bellsouth.net
- Re: gas Grumpy rant
- Re: IAT range
- Re: gas Grumpy rant
- Re: IAT range
- From: "black maj" <blackmin@hotmail.com>
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: gas Grumpy rant
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: gas Grumpy rant
- From: "TK" <terryk@foothill.net>
- Re: gas Grumpy rant
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: gas Grumpy rant
- Re: gas Grumpy rant
- From: "TK" <terryk@foothill.net>
- Re: Heat crazed mad scientist
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: gas Grumpy rant
- From: Shannen Durphey <shannen@grolen.com>
- Re: Heat crazed mad scientist
- From: Shannen Durphey <shannen@grolen.com>
- Re: gas Grumpy rant
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: gas Grumpy rant
- From: "Dave Zug" <dzug@delanet.com>
- Re: gas Grumpy rant
- Re: gas Grumpy rant
- From: Aaron G Kallotte <akallotte@juno.com>
- Re: gas Grumpy rant
- From: "Bruce Plecan" <nacelp@bright.net>
- Mefi, Mefi, Mefi....
- From: Shannen Durphey <shannen@grolen.com>
- Good Weekend
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: gas Grumpy rant
- Re: Good Weekend
- From: Aaron Willis <darkmonahue@awwwsome.com>
- Re: Good Weekend
- From: Doug Dayson <djdayson@home.com>
- Re: Good Weekend
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Good Weekend
- From: Doug Dayson <djdayson@home.com>
- Re: Good Weekend
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Good Weekend
- From: Doug Dayson <djdayson@home.com>
- Re: Good Weekend
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Good Weekend
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: IAT range
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Good Weekend
- From: Aaron Willis <darkmonahue@awwwsome.com>
- Re: 1998 4L60E & ECM
- From: "Programmer" <nwester@eidnet.org>
- RE: Heat crazed mad scientist
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Good Weekend
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Heat crazed mad scientist
- From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
- RE: Two barrel TBI must have a flaw, I give up.
- From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
- RE: Heat crazed mad scientist
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Someone was using CATS stuff?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Heat crazed mad scientist
- From: John_Calabrese@ENGELHARD.COM
- RE: 4.6L Ford MAF was Re: Heat crazed mad scientist
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: gas Grumpy rant
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Heat crazed mad scientist
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Heat crazed mad scientist
- From: Gabe <gellett@earthlink.net>
- Re: Heat crazed mad scientist
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Heat crazed mad scientist
- From: John_Calabrese@ENGELHARD.COM
- Re: Two barrel TBI must have a flaw, I give up.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Heat crazed mad scientist
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: Heat crazed mad scientist
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Heat crazed mad scientist
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Heat crazed mad scientist
- From: Len Sabatine <sabatine@epix.net>
- Re: Heat crazed mad scientist
- From: John_Calabrese@ENGELHARD.COM
- RE: Someone was using CATS stuff?
- From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
- 1997 Chev Chip Advice
- From: "Jeffrey Scott" <jws6367@mailcity.com>
- Re: Someone was using CATS stuff?
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Someone was using CATS stuff?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Heat crazed mad scientist
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Heat crazed mad scientist
- From: "Dave Zug" <dzug@delanet.com>
- Re: Heat crazed mad scientist
- From: "Dave Zug" <dzug@delanet.com>
- Re: Heat crazed mad scientist
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Heat crazed mad scientist
- From: "Bruce Plecan" <nacelp@bright.net>
- Electric Vehicle bragging (was Re: Heat...)
- From: Steven Ciciora <ciciora@Ciciora.com>
- Cruise control and 92EFI
- From: Vinnie Moscaritolo <vinnie@vmeng.com>
- RE: Someone was using CATS stuff?
- From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
- RE: Two barrel TBI must have a flaw, I give up.
- From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
- Re: Someone was using CATS stuff?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Someone was using CATS stuff?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: wooden spacers
- From: Hotrodderzzz@aol.com
- Rev Limiter on '87 Corvette
- From: Aaron G Kallotte <akallotte@juno.com>
- Re: Heat crazed mad scientist
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: wooden spacers
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Rev Limiter on '87 Corvette
- From: "Dave Zug" <dzug@delanet.com>
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
- From: Mike Wesley <mwesley@mediaone.net>
- Mad scientist VS. The info highway
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Rev Limiter on '87 Corvette
- From: "TK" <terryk@foothill.net>
- RE: Two barrel TBI must have a flaw, I give up.
- From: "black maj" <blackmin@hotmail.com>
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
- From: Mike Wesley <mwesley@mediaone.net>
- RE: Mad scientist VS. The info highway
- From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
- MAP Sensor Pinouts
- From: Berg Family <rgberg@srv.net>
- RE: Mad scientist VS. The info highway
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: 4.6L Ford MAF
- From: garwillis@msn.com (Garfield Willis)
- RE: ANLX-5474 update?YES
- From: Mika.Helander@softbit.fi
- RE: 4.6L Ford MAF was Re: Heat crazed mad scientist
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: 4.6L Ford MAF was Re: Heat crazed mad scientist
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: 4.6L Ford MAF
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: 4.6L Ford MAF
- From: Mike Wesley <mwesley@mediaone.net>
- Re: wooden spacers
- From: Hotrodderzzz@aol.com
- tpi intakes
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: wooden spacers
- From: steve ravet <sravet@arm.com>
- Re: MAP Sensor Pinouts
- From: steve ravet <sravet@arm.com>
- Re: wooden spacers
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- RE: Mad scientist VS. The info highway
- From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
- From: "NickG" <nikog@mediaone.net>
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
- From: Mike Wesley <mwesley@mediaone.net>
- RE: 4.6L Ford MAF was Re: Heat crazed mad scientist
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: wooden spacers
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Rev Limiter on '87 Corvette
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Rev Limiter on '87 Corvette
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Rev Limiter on '87 Corvette
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: tpi intakes
- From: "Bruce Plecan" <nacelp@bright.net>
- 1998 O2 sensor
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- RE: Rev Limiter on '87 Corvette
- From: Mike Rolica <mrolica@meridian-mag.com>
- PASSlock system bypass?
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- RE: Rev Limiter on '87 Corvette
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: 1998 O2 sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- Microsoft Outlook 8.5 PROBLEMS
- [Admin] Plain Text Main only please
- Re: 1998 O2 sensor
- From: garwillis@msn.com (Garfield Willis)
- RE: tpi intakes
- From: "Timothy Siford" <timsiford@frederickmd.com>
- FW: tpi intakes
- From: "trax" <trax@frederickmd.com>
- Re: 1998 O2 sensor
- From: Eric Clark <eclark@hoser.com>
- Re: 1998 O2 sensor
- From: garwillis@msn.com (Garfield Willis)
- RE: tpi intakes
- From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
- RE: tpi intakes
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: 1998 O2 sensor
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- RE: Rev Limiter on '87 Corvette
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: [Admin] Plain Text Main only please
- From: garwillis@msn.com (Garfield Willis)
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
- From: "Programmer" <nwester@eidnet.org>
- RE: 1998 O2 sensor
- From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
- Re: 1997 Chev Chip Advice
- From: "Programmer" <nwester@eidnet.org>
- RE: tpi intakes
- From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
- Re: tpi intakes
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: tpi intakes
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Rev Limiter on '87 Corvette
- From: Aaron G Kallotte <akallotte@juno.com>
- Re: 1998 O2 sensor
- From: garwillis@msn.com (Garfield Willis)
- RE: tpi intakes
- From: "trax" <trax@frederickmd.com>
- Re: wooden spacers
- From: Aaron Willis <darkmonahue@awwwsome.com>
- RE: 1998 O2 sensor
- From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
- RE: wooden spacers
- From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
- Re: 1998 O2 sensor
- From: Len Sabatine <sabatine@epix.net>
- RE: tpi intakes
- From: "J. T. Spilman" <jtstexas@home.com>
- Re: PASSlock system bypass?
- From: Len Sabatine <sabatine@epix.net>
- Re: PASSlock system bypass?
- Re: PASSlock system bypass?
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: PASSlock system bypass?
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- RE: wooden spacers
- From: Aaron Willis <darkmonahue@awwwsome.com>
- Re: wooden spacers
- Re: ANLX-5474 update?YES
- From: Shannen Durphey <shannen@grolen.com>
- RE: Rev Limiter on '87 Corvette
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- RE: Rev Limiter on '87 Corvette
- From: Mike Rolica <mrolica@meridian-mag.com>
- Lambda sensors - Where, Why and how Much ?
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: wooden spacers
- From: steve ravet <sravet@arm.com>
- '84 Corvette .bin and/or ecu file needed
- From: "Craig Marcho" <test@airmail.net>
- Re: '84 Corvette .bin and/or ecu file needed
- From: Andrew Mattei <amattei@mindspring.com>
- Re: Lambda sensors - Where, Why and how Much ?
- From: Squash <realsquash@yahoo.com>
- Cruise control and 92EFI
- From: Vinnie Moscaritolo <vinnie@vmeng.com>
- RE: Cruise control and 92EFI
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Lambda sensors - Where, Why and how Much ?
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- RE: Lambda sensors - Where, Why and how Much ?
- Pump Shot
- From: "trax" <trax@frederickmd.com>
- Re: Pump Shot
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 4.6L Ford MAF was Re: Heat crazed mad scientist
- From: "Programmer" <nwester@eidnet.org>
- Re: Cruise control and 92EFI
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Pump Shot
- From: "trax" <trax@frederickmd.com>
- Re: '84 Corvette .bin and/or ecu file needed
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: 4.6L Ford MAF was Re: Heat crazed mad scientist
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Pump Shot
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Ford New mailing list
- From: "Bruce Plecan" <nacelp@bright.net>
- 730 4 cyl wiring ?
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: wooden spacers
- From: "Mark M. Pikas" <mpikas@umiacs.umd.edu>
- Re: wooden spacers
- From: "Swayze" <kswayze@bellsouth.net>
- checksum error last byte
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: checksum error part two
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- RE: '84 Corvette .bin and/or ecu file needed
- From: "Craig Marcho" <marcho@flash.net>
- [Admin] Someone has return-receipt on
- Re: PASSlock system bypass?
- Re: '84 Corvette .bin and/or ecu file needed
- From: Shannen Durphey <shannen@grolen.com>
- AFDY/6022 .bin in incoming
- From: Shannen Durphey <shannen@grolen.com>
- Re: checksum error part two
- From: Shannen Durphey <shannen@grolen.com>
- ODBD II ECM's in older cars?
- From: Keith <kgil1@tampabay.rr.com>
- Re: ODBD II ECM's in older cars?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: checksum error part two
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: Lambda sensors - Where, Why and how Much ?
- From: "Edward J. Malkiewicz" <krazyed@worldnet.att.net>
- Re: Lambda sensors - Where, Why and how Much ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: PASSlock system bypass?
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: ODBD II ECM's in older cars?
- Re: [Admin] Someone has return-receipt on
- RE: Lambda sensors - Where, Why and how Much ?
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Delco chip 16172718?
- From: Daniel Henriksson <rotax@ludd.luth.se>
- Re: ODBD II ECM's in older cars?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Lambda sensors - Where, Why and how Much ?
- From: "Bruce Plecan" <nacelp@bright.net>
- 727 ECU limits
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: Pump Shot
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 730 4 cyl wiring ?
- From: Pat Ford <pford@qnx.com>
- Re: PASSlock system bypass?
- Re: 727 ECU limits
- RE: Pump Shot
- From: Eric Bryant <BRYANTE@ghsp.com>
- Re: 727 ECU limits
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 727 ECU limits
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: ODBD II ECM's in older cars?
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Lambda sensors - Where, Why and how Much ?
- From: Squash <realsquash@yahoo.com>
- Re: ODBD II ECM's in older cars?
- From: "TK" <terryk@foothill.net>
- Re: Lambda sensors - Where, Why and how Much ?
- From: Len Sabatine <sabatine@epix.net>
- Re: Lambda sensors - Where, Why and how Much ?
- From: Squash <realsquash@yahoo.com>
- RE: ODBD II ECM's in older cars?
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: ODBD II ECM's in older cars?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Lambda sensors - Where, Why and how Much ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Lambda sensors - Where, Why and how Much ?
- From: garwillis@msn.com (Garfield Willis)
- Re: Lambda sensors - Where, Why and how Much ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Lambda sensors - Where, Why and how Much ?
- From: Squash <realsquash@yahoo.com>
- Re: ODBD II ECM's in older cars?
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Lambda sensors - Where, Why and how Much ?
- From: Eric Bryant <BRYANTE@ghsp.com>
- Re: 730 4 cyl wiring ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: krazy ed
- Re: 727 ECU limits
- Re: Lambda sensors - Where, Why and how Much ?
- From: Len Sabatine <sabatine@epix.net>
- Re: Lambda sensors - Where, Why and how Much ?
- From: Len Sabatine <sabatine@epix.net>
- RE: Lambda sensors - Where, Why and how Much ?
- From: Len Sabatine <sabatine@epix.net>
- FW: Lambda sensors - Where, Why and how Much ?
- From: "Paul Murphy" <paul@vb.co.za>
- Re: 727 ECU limits
- From: Ludis Langens <ludis@cruzers.com>
- Re: GM Trip Computer
- From: Ludis Langens <ludis@cruzers.com>
- Re: Fuel Injector Connector - *the MALE side* ?
- From: "Walter Sherwin" <wsherwin@home.com>
- RE: Pump Shot
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 727 ECU limits
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 727 ECU limits
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 727 ECU limits
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 727 ECU limits
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 727 ECU limits
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 727 ECU limits
- From: "Bruce Plecan" <nacelp@bright.net>
- Odp: Lambda sensors - Where, Why and how Much ?
- From: "Marek Skrzypiec" <elemark@priv4.onet.pl>
- Re: Pump Shot, now SU, no GMECM
- From: Aaron Willis <darkmonahue@awwwsome.com>
- Re: Lambda sensors - Where, Why and how Much ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 727 ECU limits
- Re: 727 ECU limits
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 727 ECU limits
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- RE: Rev Limiter on '87 Corvette
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Memcal needed
- From: Dan Kunnath <dank@noonetime.com>
- Re: Memcal needed
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '84 Corvette .bin and/or ecu file needed
- From: "Craig Marcho" <not_valid_email@airmail.net>
- ecm disassembly
- From: cwagner@info2000.net
- turbo seca - maf>turbo
- Re: turbo seca - maf>turbo
- From: "Bruce Plecan" <nacelp@bright.net>
- ecm disassembly
- From: "Paul Murphy" <paul@vb.co.za>
- maf temps
- Re: turbo seca - maf>turbo
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Memcal needed "got one"
- Re: turbo seca - maf>turbo
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: turbo seca - maf>turbo
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: turbo seca - maf>turbo
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: turbo seca - maf>turbo
- Re: turbo seca - maf>turbo
- Re: turbo seca - maf>turbo
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ecm disassembly
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: turbo seca - maf>turbo
- From: David Cooley <n5xmt@bellsouth.net>
- Re: turbo seca - maf>turbo
- From: David Cooley <n5xmt@bellsouth.net>
- Re: ecm disassembly
- From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
- .bin request
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- List - up?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: List - up?
- Re: List - up?
- From: rr <RRauscher@nni.com>
- Can a header collector leak make the o2 readings innacurate?
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Can a header collector leak make the o2 readings innacurate?
- From: rr <RRauscher@nni.com>
- Re: Can a header collector leak make the o2 readings innacurate?
- From: Len Sabatine <sabatine@epix.net>
- Re: List - up?
- From: Bob Valentine <bob@tecmark.com>
- Non EFI..Organ transplants..giving blood
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: ecm disassembly
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Idle Block Learn Cell ??
- From: Squash <realsquash@yahoo.com>
- RE: Idle Block Learn Cell ??
- From: "trax" <trax@frederickmd.com>
- RE: Idle Block Learn Cell ??
- From: Squash <realsquash@yahoo.com>
- Re: Non EFI..Organ transplants..giving blood
- From: "Bruce Plecan" <nacelp@bright.net>
- PCM and Trannies
- From: "Bruce Plecan" <nacelp@bright.net>
- Min Cool for Closed Loop Fuel
- From: "trax" <trax@frederickmd.com>
- Min Cool for CLF ...
- From: "trax" <trax@frederickmd.com>
- Re: Min Cool for CLF ...
- From: "Bruce Plecan" <nacelp@bright.net>
- PCM and Trannies
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: ecm disassembly
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: ecm disassembly
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: ecm disassembly
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Can a header collector leak make the o2 readings innacurate?
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Re: Idle Block Learn Cell ??
- From: rr <RRauscher@nni.com>
- '747 FL1&2 .ecu entries
- From: rr <RRauscher@nni.com>
- Somewhat off topic: WTB: Old Laptop
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Min Cool for Closed Loop Fuel
- From: romans@starstream.net (Romans, Mark)
- Re: Somewhat off topic: WTB: Old Laptop
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Can a header collector leak make the o2 readings innacurate?
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Somewhat off topic: WTB: Old Laptop
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Somewhat off topic: WTB: Old Laptop
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: Non EFI..Organ transplants..giving blood
- From: "Programmer" <nwester@eidnet.org>
- Re: Idle Block Learn Cell ??
- From: Squash <realsquash@yahoo.com>
- Re: Idle Block Learn Cell ??
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??]
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Re: Idle Block Learn Cell ??
- From: Squash <realsquash@yahoo.com>
- Re: Somewhat off topic: WTB: Old Laptop
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Can a header collector leak make the o2 readings innacurate?
- From: Len Sabatine <sabatine@epix.net>
- Re: Can a header collector leak make the o2 readings innacurate?
- From: Len Sabatine <sabatine@epix.net>
- Re: ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??]
- From: Squash <realsquash@yahoo.com>
- RE: ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??]
- From: "trax" <trax@frederickmd.com>
- Re: Somewhat off topic: WTB: Old Laptop
- From: Andrew Mattei <amattei@mindspring.com>
- Re: Idle Block Learn Cell ??
- maf systems..
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Somewhat off topic: WTB: Old Laptop
- From: Hotrodderzzz@aol.com
- Re: Somewhat off topic: WTB: Old Laptop
- From: "cbrooks1 " <cbrooks1@mail.tqci.net>
- Re: Somewhat off topic: WTB: Old Laptop
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: maf systems..
- From: romans@starstream.net (Romans, Mark)
- Re: Somewhat off topic: WTB: Old Laptop
- From: Gabe <gellett@earthlink.net>
- Re: Idle Block Learn Cell ??
- From: Len Sabatine <sabatine@epix.net>
- RE: ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??]
- From: Squash <realsquash@yahoo.com>
- Mustang stuff for sale/trade
- From: steve ravet <sravet@arm.com>
- RE: maf systems..
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: maf systems..
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Somewhat off topic: WTB: Old Laptop
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Somewhat off topic: WTB: Old Laptop
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: Can a header collector leak make the o2 readings innacurate? - YES!
- Re: Idle Block Learn Cell ??
- From: Squash <realsquash@yahoo.com>
- Re: ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??]
- From: Michael Davis <davis@mail.eecis.udel.edu>
- RE: ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??]
- From: "trax" <trax@frederickmd.com>
- General tuning question - fuel economy
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: General tuning question - fuel economy
- RE: General tuning question - fuel economy
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: General tuning question - fuel economy
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: General tuning question - fuel economy
- From: Squash <realsquash@yahoo.com>
- BPW and Cylinder Vol.?
- From: Squash <realsquash@yahoo.com>
- RE: ECU file format bug or gray matter loss? [was Re: Idle Block Learn Cell ??]
- From: Squash <realsquash@yahoo.com>
- lb/hr calculation
- From: "trax" <trax@frederickmd.com>
- Re: General tuning question - fuel economy
- From: "Bruce Plecan" <nacelp@bright.net>
- Wide Band Oxygen Sensor - Request For Comments(Updated June 14 2000)
- From: "Paul" <paul@vb.co.za>
- Re: BPW and Cylinder Vol.?
- From: rr <RRauscher@nni.com>
- Re: lb/hr calculation
- From: rr <RRauscher@nni.com>
- Re: Somewhat off topic: WTB: Old Laptop
- From: Shannen Durphey <shannen@grolen.com>
- Fw: Kalmaker software
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: General tuning question - fuel economy
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: General tuning question - fuel economy
- From: romans@starstream.net (Romans, Mark)
- Re: General tuning question - fuel economy
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: General tuning question - fuel economy
- From: "Craig Marcho" <marcho@flash.net>
- Re: General tuning question - fuel economy
- From: Marc Randolph <mrand@pobox.com>
- Wide Range OX sensor
- Re: Fw: Kalmaker software
- From: Pat Ford <pford@qnx.com>
- Bosch (Leaded Fuel) 4 wire oxygen sensor PB-11
- From: "Paul" <paul@vb.co.za>
- Re: BPW and Cylinder Vol.?
- From: Squash <realsquash@yahoo.com>
- lb/hr calculation in ERROR (TunerCat vs. WinBin)
- From: "trax" <trax@frederickmd.com>
- Re: lb/hr calculation in ERROR (TunerCat vs. WinBin)
- From: Squash <realsquash@yahoo.com>
- Re: lb/hr calculation in ERROR (TunerCat vs. WinBin)
- From: Michael Davis <davis@mail.eecis.udel.edu>
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
- From: "trax" <trax@frederickmd.com>
- Re: BPW and Cylinder Vol.?
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: General tuning question - fuel economy
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
- From: Eric Aos <EOA@spartek.com>
- RE: General tuning question - fuel economy
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Can an ECM "learn" how to start the car better?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Can an ECM "learn" how to start the car better?
- Re: lb/hr calculation in ERROR (TunerCat vs. WinBin)
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Re: Can an ECM "learn" how to start the car better?
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Can an ECM "learn" how to start the car better?
- From: "trax" <trax@frederickmd.com>
- Re: General tuning question - fuel economy
- From: romans@starstream.net (Romans, Mark)
- Re: General tuning question - fuel economy
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Can an ECM "learn" how to start the car better?
- From: Roger Heflin <rah@horizon.hit.net>
- RE: Can an ECM "learn" how to start the car better?
- From: "trax" <trax@frederickmd.com>
- Re: BPW and Cylinder Vol.?
- Re: BPW and Cylinder Vol.?
- From: "Jeff M" <tystorm@email.msn.com>
- Re: lb/hr calculation in ERROR (TunerCat vs. WinBin)
- RE: General tuning question - fuel economy
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: BPW and Cylinder Vol.?
- From: Roger Heflin <rah@horizon.hit.net>
- Re: BPW and Cylinder Vol.?
- From: Squash <realsquash@yahoo.com>
- Re: BPW and Cylinder Vol.?
- From: Squash <realsquash@yahoo.com>
- Re: Can an ECM "learn" how to start the car better?
- Re: Fw: Kalmaker software
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Can an ECM "learn" how to start the car better?
- From: Len Sabatine <sabatine@epix.net>
- 165 puzzling me again...
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Can an ECM "learn" how to start the car better?
- From: "Bruce Plecan" <nacelp@bright.net>
- EGT gauges
- From: Roger Heflin <rah@horizon.hit.net>
- RE: Can an ECM "learn" how to start the car better?
- From: Roger Heflin <rah@horizon.hit.net>
- RE: Can an ECM "learn" how to start the car better?
- From: Len Sabatine <sabatine@epix.net>
- Re: EGT gauges
- From: Len Sabatine <sabatine@epix.net>
- Re: 165 puzzling me again...
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Can an ECM "learn" how to start the car better?
- From: "trax" <trax@frederickmd.com>
- Re: BPW and Cylinder Vol.?
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Can an ECM "learn" how to start the car better?
- From: Squash <realsquash@yahoo.com>
- Re: BPW and Cylinder Vol.?
- Re: 165 puzzling me again...
- From: "alexpeper" <alexpeper@email.msn.com>
- winbin
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Can an ECM "learn" how to start the car better?
- RE: 165 puzzling me again...
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: 165 puzzling me again...
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: winbin
- From: Eric Aos <EOA@spartek.com>
- Re: 165 puzzling me again...
- From: Marc Randolph <mrand@pobox.com>
- RE: winbin
- From: "trax" <trax@frederickmd.com>
- Re: winbin
- From: Marc Randolph <mrand@pobox.com>
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
- From: "trax" <trax@frederickmd.com>
- RE: winbin
- From: Eric Aos <EOA@spartek.com>
- Re: EGT gauges
- From: Roger Heflin <rah@horizon.hit.net>
- Re: 165 puzzling me again...
- From: rr <RRauscher@nni.com>
- Re: winbin
- From: steve ravet <sravet@arm.com>
- BIG WinBin vs TunerCat discrepencies
- From: "trax" <trax@frederickmd.com>
- Spark Advance discrepency somewhat figured out
- From: "trax" <trax@frederickmd.com>
- Re: EGT gauges
- From: Len Sabatine <sabatine@epix.net>
- RE: Spark Advance discrepency somewhat figured out
- From: Eric Aos <EOA@spartek.com>
- RE: BIG WinBin vs TunerCat discrepencies
- From: Eric Aos <EOA@spartek.com>
- off topic question?
- From: Dave Evans <dave@lotuscarlton.demon.co.uk>
- Re: off topic question?
- From: "Bruce Plecan" <nacelp@bright.net>
- Diacom help
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: Diacom help
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BPW and Cylinder Vol.?
- From: Scot Sealander <Sealand@clarityconnect.com>
- RE: winbin
- From: "Mike Rolica" <97005620@lambton.on.ca>
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
- From: "Mike Rolica" <97005620@lambton.on.ca>
- RE: BIG WinBin vs TunerCat discrepencies
- From: "Mike Rolica" <97005620@lambton.on.ca>
- RE: BPW and Cylinder Vol.?
- From: "Mike Rolica" <97005620@lambton.on.ca>
- Re: BPW and Cylinder Vol.?
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: lb/hr calculation in ERROR (TunerCat vs. WinBin)
- From: rr <RRauscher@nni.com>
- Re: BPW and Cylinder Vol.?
- From: rr <RRauscher@nni.com>
- Re: Spark Advance discrepency somewhat figured out
- From: rr <RRauscher@nni.com>
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
- From: cwagner@info2000.net
- RE: lb/hr calculation in ERROR (TunerCat vs. WinBin)
- From: cwagner@info2000.net
- ALDL <--> PC interface
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Another .bin request
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: General tuning question - fuel economy
- From: romans@starstream.net (Romans, Mark)
- Re: 165 puzzling me again...
- From: romans@starstream.net (Romans, Mark)
- Re: Kalmaker software
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Any other GM comms speeds?
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- RE: Any other GM comms speeds?
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- RE: ALDL <--> PC interface
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- RE: ALDL <--> PC interface
- From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
- Re: Any other GM comms speeds?
- From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
- Re: Any other GM comms speeds?
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: EGT gauges
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: Diacom help
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- RE: Any other GM comms speeds?
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- WinBin vs TunerCat ... VE (fuel tables) ... Eric ...
- From: "trax" <trax@frederickmd.com>
- Re: WinBin vs TunerCat ... VE (fuel tables) ... Eric ...
- From: Squash <realsquash@yahoo.com>
- RE: WinBin vs TunerCat ... VE (fuel tables) ... Eric ...
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: BIG WinBin vs TunerCat discrepencies
- From: Squash <realsquash@yahoo.com>
- RE: BPW and Cylinder Vol.?
- From: Pat Ford <pford@qnx.com>
- Re: BPW and Cylinder Vol.?
- From: Pat Ford <pford@qnx.com>
- Re: off topic question?
- From: Aaron G Kallotte <akallotte@juno.com>
- Re: BIG WinBin vs TunerCat discrepencies
- From: "Programmer" <nwester@eidnet.org>
- Diacom frame save?
- From: Squash <realsquash@yahoo.com>
- RE: BPW and Cylinder Vol.?
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: BIG WinBin vs TunerCat discrepencies
- From: "Swayze" <kswayze@bellsouth.net>
- Re: BIG WinBin vs TunerCat discrepencies
- From: Squash <realsquash@yahoo.com>
- RE: BPW and Cylinder Vol.?
- From: Pat Ford <pford@qnx.com>
- RE: BPW and Cylinder Vol.?
- From: Steven Ciciora <ciciora@Ciciora.com>
- RE: Diacom frame save?
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: BIG WinBin vs TunerCat discrepencies
- From: Pat Ford <pford@qnx.com>
- Ludis, can I get info on your debug board
- From: Pat Ford <pford@qnx.com>
- RE: Diacom frame save?
- From: Squash <realsquash@yahoo.com>
- Re: BIG WinBin vs TunerCat discrepencies
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: BIG WinBin vs TunerCat discrepencies
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: BIG WinBin vs TunerCat discrepencies
- From: "Bruce Plecan" <nacelp@bright.net>
- Changing 165 fuel delivery was "General tuning question - fuel ec onomy"
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Changing 165 fuel delivery was "General tuning question - fuel economy"
- From: Rick Lindstedt <rick@mafb.org>
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- ECM part numbers?
- From: steve ravet <sravet@arm.com>
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
- From: Rick Lindstedt <rick@mafb.org>
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Any other GM comms speeds?
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Vauxhall/Opel Broadcast codes.
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- RE: Changing 165 fuel delivery was "General tuning question -fuel economy"
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
- From: Squash <realsquash@yahoo.com>
- Re: ECM part numbers?
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Changing 165 fuel delivery was "General tuning question -fuel economy"
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BPW and Cylinder Vol.?
- From: Ludis Langens <ludis@cruzers.com>
- Re: BPW and Cylinder Vol.?
- From: Ludis Langens <ludis@cruzers.com>
- Re: ECM part numbers?
- From: Ludis Langens <ludis@cruzers.com>
- Re: Ludis, can I get info on your debug board
- From: Ludis Langens <ludis@cruzers.com>
- Re: 727 ECU limits
- From: Ludis Langens <ludis@cruzers.com>
- Re: Changing 165 fuel delivery was "General tuning question - fuel economy"
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ludis, can I get info on your debug board
- From: Pat Ford <pford@qnx.com>
- Honda/NGK O2 sensor part # versus Horiba/NGK O2 sensor part #s
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
- From: Squash <realsquash@yahoo.com>
- Re: Changing 165 fuel delivery was "General tuning question - fuel economy"
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Changing 165 fuel delivery was "General tuning question - fuel economy"
- From: "Bruce Plecan" <nacelp@bright.net>
- Update
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- RE: ECM part numbers?
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Changing 165 fuel delivery was "General tuning question -fuel economy"
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: ECM part numbers?
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: ECM part numbers?
- From: steve ravet <sravet@arm.com>
- Re: ECM part numbers?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Changing 165 fuel delivery was "General tuning question -fuel economy"
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM part numbers?
- From: Keith <kgil1@tampabay.rr.com>
- Re: ECM part numbers?
- Changing 165 fuel delivery
- From: romans@starstream.net (Romans, Mark)
- 1226870/1227165 conversion
- From: "Jeff Kopp" <jkopp@direcpc.com>
- 727 RPM limit
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 1226870/1227165 conversion
- From: rr <RRauscher@nni.com>
- Re: 1226870/1227165 conversion
- From: romans@starstream.net (Romans, Mark)
- Re: 727 RPM limit
- From: rr <RRauscher@nni.com>
- MAF use and calibration
- From: "NickG" <nikog@mediaone.net>
- Re: Honda/NGK O2 sensor part # versus Horiba/NGK O2 sensor part #s
- From: garwillis@msn.com (Garfield Willis)
- Re: 1226870/1227165 conversion
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- RE: MAF use and calibration
- From: "Mike Rolica" <97005620@lambton.on.ca>
- Re: ECM part numbers?
- From: Ludis Langens <ludis@cruzers.com>
- Re: 727 RPM limit
- From: Ludis Langens <ludis@cruzers.com>
- Re: winbin
- From: Ludis Langens <ludis@cruzers.com>
- Re: Vauxhall/Opel Broadcast codes.
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Any other GM comms speeds?
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Changing 165 fuel delivery
- From: Aaron G Kallotte <akallotte@juno.com>
- 730 ECM ..??
- From: Rick Lindstedt <rick@mafb.org>
- Re: 1226870/1227165 conversion
- From: "Jeff Kopp" <superchevyparts@mindspring.com>
- RE: Any other GM comms speeds?
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: Any other GM comms speeds?
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Wide Band O2 and tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- factory remanufactured... ?
- EPROM burning
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: factory remanufactured... ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM burning
- From: "Bruce Plecan" <nacelp@bright.net>
- Odp: Any other GM comms speeds?
- From: "Marek" <elemark@priv4.onet.pl>
- Odp: Bosch (Leaded Fuel) 4 wire oxygen sensor PB-11
- From: "Marek" <elemark@priv4.onet.pl>
- BIN uploaded
- From: Squash <realsquash@yahoo.com>
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Bosch (Leaded Fuel) 4 wire oxygen sensor PB-11
- From: "Bruce Plecan" <nacelp@bright.net>
- AXSH2423 differences
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: AXSH2423 differences
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: factory remanufactured... ?
- From: Len Sabatine <sabatine@epix.net>
- Re: Improper DIY_EFI behaviour-or BS from the sidelines
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BIN uploaded
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: factory remanufactured... ?
- Re: 727 ECU limits
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: factory remanufactured... ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Fuel Filters
- From: Squash <realsquash@yahoo.com>
- Re: BIN uploaded
- From: Squash <realsquash@yahoo.com>
- Re: 727 ECU limits
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Improper DIY_EFI behaviour
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1226870/1227165 conversion
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Improper DIY_EFI behaviour
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- MAP vs MAF FAQ
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1226870/1227165 conversion
- From: "Jeff Kopp" <superchevyparts@mindspring.com>
- Re: MAP vs MAF FAQ
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Fw: MAP vs MAF FAQ
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MAP vs MAF Discussion
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1226870/1227165 conversion
- From: "Bruce Plecan" <nacelp@bright.net>
- Odp: Any other GM comms speeds?
- From: "Marek" <elemark@priv4.onet.pl>
- Re: Fuel Filters
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BIN uploaded
- From: "Bruce Plecan" <nacelp@bright.net>
- GARFIELD IS WAY WAY OUT OF LINE RE: EGOR, oxygen sensor, O2 sensor, wide band oxygen sensor
- From: "Paul" <paul@vb.co.za>
- Re: 727 ECU limits
- From: "Bruce Plecan" <nacelp@bright.net>
- Paul vs Gar, please take off list.
- From: Shannen Durphey <shannen@grolen.com>
- Re: BIN uploaded
- Re: Changing 165 fuel delivery
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BIN uploaded
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BIN uploaded
- Holley 4barrel TBI, 700 cfm or 454 TB? Q's
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: 1226870/1227165 conversion
- From: Bob Valentine <bob@tecmark.com>
- Re: ECM part numbers?
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: factory remanufactured... ?
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1226870/1227165 conversion
- From: "Jeff Kopp" <jkopp@direcpc.com>
- Re: 727 ECU limits
- From: rr <RRauscher@nni.com>
- Truely sad news
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Truely sad news
- From: Jason Weir <jweir@worldnet.att.net>
- Re: Truely sad news
- From: Kevin Crain <kevin@warpten.com>
- Re: Truely sad news
- From: "Dave Zug" <dzug@delanet.com>
- Enough about Gar
- From: "Bruce Plecan" <nacelp@bright.net>
- You guys don't need to be warned do you?
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: EPROM burning
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: Changing 165 / Nother Q
- From: "Dave Zug" <dzug@delanet.com>
- Re: ECM part numbers?
- Re: MAF use and calibration
- From: "Dave Zug" <dzug@delanet.com>
- RE: Truely sad news
- From: Carl Summers <InTech@writeme.com>
- Info on Honda/NTK wide band oxygen sensors
- From: "Paul" <paul@vb.co.za>
- Chrysler ROMs (But EFI!!)
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Truely sad news
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM burning
- From: rr <RRauscher@nni.com>
- Re: Truely sad news
- From: rr <RRauscher@nni.com>
- Re: MAF use and calibration
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM burning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM burning
- From: Roger Heflin <rah@horizon.hit.net>
- Horiba/NTK and ECM/NTK [was Re: Info on Honda/NTK wide band oxygen sensors]
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- Talented DIYer EE needed
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM burning
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: 1226870/1227165 conversion
- From: romans@starstream.net (Romans, Mark)
- Re: Changing 165 / Nother Q
- From: romans@starstream.net (Romans, Mark)
- Re: Truely sad news
- From: Ken Kelly <PCMdoc@surfree.com>
- Re: Changing 165 / Nother Q
- From: "Bruce Plecan" <nacelp@bright.net>
- TBI tuning headache
- From: olbap <olbap@mail.mia.bellsouth.net>
- Dwell meter on injectors
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
- Re: Truely sad news
- From: Shannen Durphey <shannen@grolen.com>
- Re: 1226870/1227165 conversion
- From: Shannen Durphey <shannen@grolen.com>
- microcontrollers slightly more powerful than a pic?
- From: Roger Heflin <rah@horizon.hit.net>
- Vortec FI
- Re: Vortec FI
- manifold spacers
- Re: Vortec FI
- Re: microcontrollers slightly more powerful than a pic?
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: Vortec FI
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: manifold spacers
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Vortec FI
- From: "C. Brooks" <cbrooks1@tqci.net>
- Re: Dwell meter on injectors
- From: "Bruce Plecan" <nacelp@bright.net>
- ECM Selection FAQ
- From: "Bruce Plecan" <nacelp@bright.net>
- Abbrviations General EFI
- From: "Bruce Plecan" <nacelp@bright.net>
- 808 Hac
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Vortec FI
- EPROM identification
- From: "Jeff Kopp" <jkopp@direcpc.com>
- Re: EPROM identification
- From: Shannen Durphey <shannen@grolen.com>
- Re: EPROM identification
- From: "Bruce Plecan" <nacelp@bright.net>
- manifold spacers
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: manifold spacers
- Re: manifold spacers
- Re: manifold spacers
- Re: Vortec FI
- '84 G-body with carbureted CCC
- big block fi
- From: "Mike" <itsmike@lvcm.com>
- Re: microcontrollers slightly more powerful than a pic?
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Vortec FI... pictures
- From: Shannen Durphey <shannen@grolen.com>
- Better suited for DIY_EFI??
- From: Shannen Durphey <shannen@grolen.com>
- Re: '84 G-body with carbureted CCC
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: manifold spacers
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: manifold spacers
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '84 G-body with carbureted CCC
- Re: big block fi
- Re: Abbrviations General EFI
- From: "Bruce Plecan" <nacelp@bright.net>
- FAQ ideas
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Abbrviations General EFI
- From: "wdhcrump" <dabney@dhcrump.com>
- Re: EPROM burning
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: Abbrviations General EFI
- RE: '84 G-body with carbureted CCC
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: big block fi
- From: "Mike" <itsmike@lvcm.com>
- Re: FAQ ideas
- From: Shannen Durphey <shannen@grolen.com>
- Re: FAQ ideas
- RE: '84 G-body with carbureted CCC
- Re: '84 G-body with carbureted CCC
- Web sites
- Re: Abbrviations General EFI
- From: Ludis Langens <ludis@cruzers.com>
- LS1 Air Mass Meters
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: '84 G-body with carbureted CCC
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: LS1 Air Mass Meters
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM Selection FAQ
- From: Pat Ford <pford@qnx.com>
- Re: Truely sad news
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: manifold spacers
- From: Pat Ford <pford@qnx.com>
- Re: LS1 Air Mass Meters
- From: Andrew Mattei <amattei@mindspring.com>
- DANGEROUS PRANK - NO EFI CONTENT
- From: John_Calabrese@ENGELHARD.COM
- Re: FAQ ideas
- From: Ernst denBroeder <edenbroe@cisco.com>
- RE: microcontrollers slightly more powerful than a pic?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: ECM Selection FAQ
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: microcontrollers slightly more powerful than a pic?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: ECM Selection FAQ
- From: Pat Ford <pford@qnx.com>
- Re: LS1 Air Mass Meters
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM Selection FAQ
- From: "Bruce Plecan" <nacelp@bright.net>
- 165 Startup learning?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: ECM Selection FAQ
- From: Pat Ford <pford@qnx.com>
- Re: ECM Selection FAQ
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 165 Startup learning?
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: DANGEROUS PRANK - NO EFI CONTENT
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: 165 Startup learning?
- From: romans@starstream.net (Romans, Mark)
- RE: DANGEROUS PRANK - NO EFI CONTENT
- From: Roger Heflin <rah@horizon.hit.net>
- RE: microcontrollers slightly more powerful than a pic?
- From: Eric Aos <EOA@spartek.com>
- Re: LS1 Air Mass Meters
- From: Andrew Mattei <amattei@mindspring.com>
- Re: ECM Selection FAQ
- From: Ludis Langens <ludis@cruzers.com>
- Re: FAQ ideas
- From: Doug Dayson <djdayson@home.com>
- RE: DANGEROUS PRANK - NO EFI CONTENT
- From: Dave Plummer <davepl@MICROSOFT.com>
- RE: DANGEROUS PRANK - NO EFI CONTENT
- Re: ECM Selection FAQ
- From: Pat Ford <pford@qnx.com>
- RE: DANGEROUS PRANK - NO EFI CONTENT
- From: Pat Ford <pford@qnx.com>
- Re: ECM Selection FAQ
- Re: DANGEROUS PRANK - NO EFI CONTENT
- From: Scott Knight <scott@scottknight.com>
- FAQ ideas
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- 4 pin HEI interface ( I know it's old hat, Sorry)
- From: "Marvin Johnson" <Wdnbtbldr@proaxis.com>
- RE: DANGEROUS PRANK - NO EFI CONTENT
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: ECM Selection FAQ
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- FAQ
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- RE: FAQ
- From: "Parker, Mark" <MParker@levingston.com>
- BIN differences
- From: "trax" <trax@frederickmd.com>
- Re: ECM Selection FAQ
- From: Todd Israels <israels@mnsi.net>
- Re: BIN differences
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: BIN differences
- From: "Bruce Plecan" <nacelp@bright.net>
- FAQ
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: BIN differences
- From: "trax" <trax@frederickmd.com>
- Re: FAQ
- From: Andrew Mattei <amattei@mindspring.com>
- Re: BIN differences (including howell730.bin)
- From: Marc Randolph <mrand@pobox.com>
- MAX232 chip is...
- From: Eric Deslauriers <Eric.Deslauriers@oracle.com>
- Re: BIN differences
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- RE: MAX232 chip is...
- From: "Rodney Fulk" <elixir@pathwaynet.com>
- Re: MAX232 chip is...
- From: Peter Gargano <peter@techedge.com.au>
- RE: MAX232 chip is...
- From: Eric Aos <EOA@spartek.com>
- Re: MAX232 chip is...
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- RE: '84 G-body with carbureted CCC
- From: Marc Piccioni <piccioni@cadvision.com>
- This year's archives
- Re: Improper DIY_EFI behaviour-or BS from the sidelines
- Re: TPI Conversion?
- From: "Robert Eickhorst" <rleickho@home.com>
- Fw: Kalmaker software Long, and boring FWIW
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: This year's archives
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: J & L bodies, was ECM Selection FAQ
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: J & L bodies, was ECM Selection FAQ
- ECM # 16181333
- From: "Peacock, Ken" <Ken.Peacock@attcanada.com>
- Re: DANGEROUS PRANK - NO EFI CONTENT
- From: "Dave Zug" <dzug@delanet.com>
- Re: BIN differences
- From: "Dave Zug" <dzug@delanet.com>
- Re: ECM # 16181333
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM # 16181333
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: BIN differences
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM # 16181333
- From: Len Sabatine <sabatine@epix.net>
- Re: 808 Hac
- From: "black maj" <blackmin@hotmail.com>
- Re:Abbrviations General EFI
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Re: FAQ ideas
- From: Ludis Langens <ludis@cruzers.com>
- Re: BIN differences
- From: Ludis Langens <ludis@cruzers.com>
- Re: '84 G-body with carbureted CCC
- From: Ludis Langens <ludis@cruzers.com>
- Re: MAX232 chip is...
- From: "John D. Bachman" <jdbachman@redrose.net>
- RE: Changing 165 fuel delivery
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Changing 165 fuel delivery was "General tuning question - fue l economy"
- From: Mike Rolica <mrolica@meridian-mag.com>
- 383 TBI
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Fw: Kalmaker software Long, and boring FWIW
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: BIN differences
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Changing 165 fuel delivery was "General tuning question - fuel economy"
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM # 16181333
- Re: 383 TBI
- RE: Changing 165 fuel delivery was "General tuning
- RE: Changing 165 fuel delivery
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Truely sad news
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Changing 165 / Nother Q
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Changing 165 / Nother Q
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Abbrviations General EFI
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: MAF Flowbench (was Changing 165 / Nother Q)
- From: Andrew Mattei <amattei@mindspring.com>
- ? about forced induction
- From: Aaron G Kallotte <akallotte@juno.com>
- Re: Abbrviations General EFI
- Re: MAF Flowbench (was Changing 165 / Nother Q)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ? about forced induction
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Changing 165 / Nother Q
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Web sites
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: MAF Flowbench (was Changing 165 / Nother Q)
- From: Eric Aos <EOA@spartek.com>
- RE: LS1 Air Mass Meters
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: FAQ ideas
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: BIN differences
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: ? about forced induction
- From: Aaron G Kallotte <akallotte@juno.com>
- RE: ? about forced induction
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: ? about forced induction
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '84 G-body with carbureted CCC
- Re: BIN differences
- From: "Dave Zug" <dzug@delanet.com>
- Re: Truely sad news
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Changing 165 / Nother Q
- From: "Dave Zug" <dzug@delanet.com>
- Back after needed break...tryna catch up
- From: garwillis@msn.com (Garfield Willis)
- Re: ? about forced induction
- From: Ludis Langens <ludis@cruzers.com>
- Re: Changing 165 / Nother Q
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: '84 G-body with carbureted CCC
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: 383 TBI
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Kalmaker software Long, and boring FWIW
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Changing 165 fuel delivery was "General tuning question - fuel economy"
- From: Shannen Durphey <shannen@grolen.com>
- Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy"
- From: Shannen Durphey <shannen@grolen.com>
- Re: Changing 165 fuel delivery
- From: garwillis@msn.com (Garfield Willis)
- Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy"
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Back after needed break...tryna catch up
- From: garwillis@msn.com (Garfield Willis)
- Re: Changing 165 fuel delivery
- From: Shannen Durphey <shannen@grolen.com>
- .bin .ecu info
- From: "black maj" <blackmin@hotmail.com>
- Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy"
- From: Shannen Durphey <shannen@grolen.com>
- Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy"
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 383 TBI
- Re: Changing 165 fuel delivery
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 383 TBI
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Changing 165 fuel delivery
- From: garwillis@msn.com (Garfield Willis)
- Re: 383 TBI
- Re: Changing 165 fuel delivery
- From: garwillis@msn.com (Garfield Willis)
- Re: FAQ ideas
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: 383 TBI
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: FAQ ideas
- From: Bob Valentine <bob@tecmark.com>
- Dead EPROM programmer
- From: Ludis Langens <ludis@cruzers.com>
- Re: Changing 165 fuel delivery
- From: "Rob Higgins" <rhiggins@cavva.com.au>
- Re: Abbrviations General EFI
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: 383 TBI
- From: Shannen Durphey <shannen@grolen.com>
- Re: FAQ ideas and update on TPI 327 project
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: Changing 165 / Nother Q
- From: "Dave Zug." <dzug@delanet.com>
- RE: Changing 165 / Nother Q
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: ECM # 16181333
- From: Ken Kelly <PCMdoc@surfree.com>
- Re: 383 TBI
- Re: LS1 Air Mass Meters
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: LS1 Air Mass Meters
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: 383 TBI -air cleaner size
- TBI pressure regulator mod
- From: Eric Deslauriers <Eric.Deslauriers@oracle.com>
- Ground Loops (non aviation)
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: @#$@#$ Changing 165 fuel delivery was "General tuning questio n - fuel economy"
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: FAQ ideas
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: FAQ ideas
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- Re: @#$@#$ Changing 165 fuel delivery was "General tuning question - fuel economy"
- From: Brent Obermiller <ober_b@sssnet.com>
- gm altenators...and efi
- From: Mike Rolica <mrolica@meridian-mag.com>
- FW: gm altenators...and efi
- From: Mike Rolica <mrolica@meridian-mag.com>
- 1999 GMC 5.3 liter Vortec
- From: "c y k" <ckyk@eudoramail.com>
- Re: gm altenators...and efi
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: gm altenators...and efi
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: gm altenators...and efi
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: gm altenators...and efi
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: gm altenators...and efi
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: gm altenators...and efi
- From: rr <RRauscher@nni.com>
- Re: Changing 165 / Nother Q
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Changing 165 / Nother Q
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Changing 165 / Nother Q
- From: Shannen Durphey <shannen@grolen.com>
- Re: Changing 165 / Nother Q
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 383 TBI
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Changing 165 / Nother Q
- From: "TRAX" <trax@frederickmd.com>
- bin uploaded
- From: cwagner@info2000.net
- RE: gm altenators...and efi
- From: "Mike Rolica" <97005620@lambton.on.ca>
- Re: bin uploaded
- From: "Bruce Plecan" <nacelp@bright.net>
- mem-cal question
- From: "TK" <terryk@foothill.net>
- Looking for a 16149396 ECM
- From: "TK" <terryk@foothill.net>
- Re: mem-cal question
- From: "TK" <terryk@foothill.net>
- RE: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
- From: olbap <olbap@mail.mia.bellsouth.net>
- Basic Stamp 2 / ALDL?
- From: Dan Gentry <dang@seanet.com>
- Re: .bin .ecu info
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Dead EPROM programmer
- From: "Rob Higgins" <rhiggins@cavva.com.au>
- Re: .bin .ecu info
- From: "black maj" <blackmin@hotmail.com>
- RE: Changing 165 / Nother Q
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: gm altenators...and efi
- From: Ernst denBroeder <edenbroe@cisco.com>
- How to get the LV8?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Dead EPROM programmer, and question
- RE: How to get the LV8?
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Dead EPROM programmer
- From: Steven Ciciora <ciciora@Ciciora.com>
- RE: gm altenators...and efi
- RE: Dead EPROM programmer
- From: Don.F.Broadus@ucm.com
- Re: Dead EPROM programmer, and question
- From: Andrew Mattei <amattei@mindspring.com>
- Re: gm altenators...and efi
- From: "Jeff M" <tystorm@email.msn.com>
- Re: gm altenators...and efi
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: gm altenators...and efi
- From: "Jeff M" <tystorm@email.msn.com>
- Heated or not O2 sensor
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: mem-cal question
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Heated or not O2 sensor
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: 1999 GMC 5.3 liter Vortec -
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
- Re: Heated or not O2 sensor
- IGNORE - TEST
- From: Eric Deslauriers <Eric.Deslauriers@oracle.com>
- Re: bin uploaded
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TBI pressure regulator mod
- From: Eric Deslauriers <Eric.Deslauriers@oracle.com>
- Re: TBI pressure regulator mod
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's
- From: olbap <olbap@mail.mia.bellsouth.net>
- Knock Sensor Question
- From: "Craig Marcho" <not_valid_email@airmail.net>
- Re: Knock Sensor Question
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Fw: SOFTWARE LAWS
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Knock Sensor Question
- From: D Kunnath <djktno@engin.umich.edu>
- Re: Fw: SOFTWARE LAWS
- Re: Knock Sensor Question
- From: "Craig Marcho" <not_valid_email@airmail.net>
- Re: Knock Sensor Question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Fw: SOFTWARE LAWS
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Knock Sensor Question
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Knock Sensor Question
- From: "Craig Marcho" <marcho@flash.net>
- Re: bin uploaded
- From: cwagner@info2000.net
- I tire of bruce plecans childish threats
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: bin uploaded
- From: cwagner@info2000.net
- Re: Knock Sensor Question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: I tire of bruce plecans childish threats
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: bin uploaded
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TBI pressure regulator mod
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Knock Sensor Question
- From: D Kunnath <djktno@engin.umich.edu>
- Re: Knock Sensor Question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: I tire of bruce plecans childish threats
- From: "Walter Sherwin" <wsherwin@home.com>
- [Fwd: TBI pressure regulator mod]
- From: Eric Deslauriers <Eric.Deslauriers@oracle.com>
- Re: Knock Sensor Question
- From: D Kunnath <djktno@engin.umich.edu>
- Mods to '85 GM TPI ECM
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: I tire of bruce plecans JUST BE QUITE AND GO AWAY, PLEASE
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Mods to '85 GM TPI ECM
- From: Shannen Durphey <shannen@grolen.com>
- Re: I tire of bruce plecans childish threats
- From: David Cooley <n5xmt@bellsouth.net>
- Re: Heated or not O2 sensor
- From: Shannen Durphey <shannen@grolen.com>
- Re: bin uploaded
- From: Shannen Durphey <shannen@grolen.com>
- Re: I tire of bruce plecans childish threats
- From: "Jeff Kopp" <jkopp@direcpc.com>
- RE: I tire of bruce plecans childish threats
- From: "Craig Marcho" <marcho@flash.net>
- RE: Mods to '85 GM TPI ECM
- From: "Craig Marcho" <marcho@flash.net>
- Re: Heated or not O2 sensor
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: Heated or not O2 sensor
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: Mods to '85 GM TPI ECM
- Re: Then ignore it
- From: Shannen Durphey <shannen@grolen.com>
- Re: Heated or not O2 sensor
- From: Shannen Durphey <shannen@grolen.com>
- Re: Mods to '85 GM TPI ECM
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: Mods to '85 GM TPI ECM
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: I tire of bruce plecans childish threats
- From: Len Sabatine <sabatine@epix.net>
- Re: Mods to '85 GM TPI ECM
- From: Shannen Durphey <shannen@grolen.com>
- Re: I tire of bruce plecans childish threats
- Re: Mods to '85 GM TPI ECM
- Re: Heated or not O2 sensor
- From: "alexpeper" <alexpeper@email.msn.com>
- GM Authorized????
- From: Shannen Durphey <shannen@grolen.com>
- Re: Knock Sensor Question
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Heated or not O2 sensor
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Just ignore it
- From: romans@starstream.net (Romans, Mark)
- Re: GM Authorized????
- From: romans@starstream.net (Romans, Mark)
- Re: I tire of bruce plecans childish threats- just a clarification
- From: olbap <olbap@mail.mia.bellsouth.net>
- Re: Mods to '85 GM TPI ECM
- From: romans@starstream.net (Romans, Mark)
- Re: I tire of bruce plecan
- From: garwillis@msn.com (Garfield Willis)
- Re: Mods to '85 GM TPI ECM
- From: Ludis Langens <ludis@cruzers.com>
- Re: Dead EPROM programmer
- From: Ludis Langens <ludis@cruzers.com>
- UBB forum, was Re: I tire
- From: Ludis Langens <ludis@cruzers.com>
- RE: Just ignore it
- From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
- Re: GM Authorized????
- Re: I tire of bruce plecans childish threats
- From: DC Smith <morepoweral@tetranet.net>
- RE: I tire of bruce plecans childish threats
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Mods to '85 GM TPI ECM
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Heated or not O2 sensor
- From: Mike Rolica <mrolica@meridian-mag.com>
- How to do 165 to 730
- From: Aaron G Kallotte <akallotte@juno.com>
- A small victory
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: UBB forum, was Re: I tire
- From: Peter Gargano <peter@techedge.com.au>
- Re: UBB forum, was Re: I tire
- From: "Craig Marcho" <not_valid_email@airmail.net>
- Re: SD (was UBB forum, was Re: I tire
- From: Andrew Mattei <amattei@mindspring.com>
- RE: How to do 165 to 730
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: I tire of bruce plecans childish threats- just a clarification
- From: Pat Ford <pford@qnx.com>
- GN coil ebay auction
- From: John_Calabrese@ENGELHARD.COM
- Re: UBB forum, was Re: I tire
- From: "gene l. clifford" <genelc@idworld.net>
- Re: UBB forum, was Re: I tire
- From: Len Sabatine <sabatine@epix.net>
- FOR SALE: LPE auction items on ebay
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- Automotive Circuit Protection - Part 1
- From: garwillis@msn.com (Garfield Willis)
- testing O2 sensor
- RE: Automotive Circuit Protection - Part 1
- From: Mike Rolica <mrolica@meridian-mag.com>
- eprom programers
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Automotive Circuit Protection - Part 1
- From: garwillis@msn.com (Garfield Willis)
- Re: testing O2 sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- Finding TDC (sorry, a bit off topic)
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: eprom programers
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Automotive Circuit Protection - Part 1
- From: garwillis@msn.com (Garfield Willis)
- Re: eprom programers
- From: Roger Heflin <rah@horizon.hit.net>
- RE: testing O2 sensor
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Automotive Circuit Protection - Part 1
- From: Roger Heflin <rah@horizon.hit.net>
- Re: testing O2 sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Automotive Circuit Protection - Part 1
- From: Eric Aos <EOA@spartek.com>
- Re: Finding TDC (sorry, a bit off topic)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Automotive Circuit Protection - Part 1
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Finding TDC (sorry, a bit off topic)
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Automotive Circuit Protection - Part 1
- From: garwillis@msn.com (Garfield Willis)
- RE: Automotive Circuit Protection - Part 1
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: testing O2 sensor
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: GM Authorized????
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: testing O2 sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Automotive Circuit Protection - Part 1
- From: Mike Rolica <mrolica@meridian-mag.com>
- TBI fuel Pumps
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Heated or not O2 sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Mods to '85 GM TPI ECM
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: Knock Sensor Question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Mods to '85 GM TPI ECM
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: Mods to '85 GM TPI ECM
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: Mods to '85 GM TPI ECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Mods to '85 GM TPI ECM
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: Mods to '85 GM TPI ECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Automotive Circuit Protection - Part 2
- From: garwillis@msn.com (Garfield Willis)
- Re: How to do 165 to 730
- From: Bob Valentine <bob@tecmark.com>
- Re: Mods to '85 GM TPI ECM
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Vendors Policies, Joke
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: How to do 165 to 730
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- RE: Vendors Policies, Joke
- From: "Craig Marcho" <marcho@flash.net>
- Re: eprom programers
- From: Ludis Langens <ludis@cruzers.com>
- Re: Vendors Policies, Joke
- From: "C. Brooks" <cbrooks1@tqci.net>
- Fuel Pressure Sensor
- From: "Scott Flanagan" <flanaj@mindspring.com>
- Re: Automotive Circuit Protection - Part 1
- From: Shannen Durphey <shannen@grolen.com>
- State/Federal Tax - was Re: Scoggin-Dickey
- From: Peter Gargano <peter@techedge.com.au>
- Re: Mods to '85 GM TPI ECM
- From: Shannen Durphey <shannen@grolen.com>
- RE: Automotive Circuit Protection - Part 1
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: Vendors Policies, Joke
- From: "Bruce Plecan" <nacelp@bright.net>
- Interesting
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Mods to '85 GM TPI ECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: How to do 165 to 730
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: testing O2 sensor
- From: Shannen Durphey <shannen@grolen.com>
- Re: Mods to '85 GM TPI ECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Automotive Circuit Protection - Part 2
- From: garwillis@msn.com (Garfield Willis)
- Re: Mods to '85 GM TPI ECM
- From: Shannen Durphey <shannen@grolen.com>
- Re: Mods to '85 GM TPI ECM
- From: garwillis@msn.com (Garfield Willis)
- Re: Finding TDC (sorry, a bit off topic)
- Re: Mods to '85 GM TPI ECM
- From: "Bruce Plecan" <nacelp@bright.net>
- GM Wiper circuit question
- From: Vinnie Moscaritolo <vinnie@vmeng.com>
- Re: Finding TDC (sorry, a bit off topic)
- From: "Bruce Plecan" <nacelp@bright.net>
- 1999 5.3 liter Vortec V-8
- From: "hi 50" <ckyk@hotmail.com>
- Re: 1999 5.3 liter Vortec V-8
- Re: 1999 5.3 liter Vortec V-8
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Mods to '85 GM TPI ECM
- From: garwillis@msn.com (Garfield Willis)
- Re: 1999 5.3 liter Vortec V-8
- Re: 1999 5.3 liter Vortec V-8
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Mods to '85 GM TPI ECM
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: 1999 5.3 liter Vortec V-8
- From: Len Sabatine <sabatine@epix.net>
- Re: Finding TDC (sorry, a bit off topic)
- From: "black maj" <blackmin@hotmail.com>
- Re: Mods to '85 GM TPI ECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Archive idea
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Mods to '85 GM TPI ECM
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: 1999 5.3 liter Vortec V-8
- Re: 1999 5.3 liter Vortec V-8
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1999 5.3 liter Vortec V-8
- Re: TBI pressure regulator mod
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1999 5.3 liter Vortec V-8
- From: "Mike" <itsmike@lvcm.com>
- Re: 1999 5.3 liter Vortec V-8
- Re: Archive idea
- From: Peter Gargano <peter@techedge.com.au>
- Archive idea
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: I tire of bruce plecan
- From: "Dave Zug" <dzug@delanet.com>
- Re: Archive idea
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: Archive idea
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Archive idea
- From: Eric Aos <EOA@spartek.com>
- RE: Archive idea
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: Mods to '85 GM TPI ECM
- From: romans@starstream.net (Romans, Mark)
- Re: Archive idea
- From: garwillis@msn.com (Garfield Willis)
- Re: Archive idea
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Archive idea
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Archive idea
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Re: Archive idea
- From: "Kelly Parker" <bigblockfw@hotmail.com>
- Wide Range OX sensor
- Automotive Circuit Protection - Part 3
- From: garwillis@msn.com (Garfield Willis)
- Re: Archive idea
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1999 5.3 liter Vortec V-8
- From: "hi 50" <ckyk@hotmail.com>
- 1999 5.3 liter Vortec V-8-B/S
- From: "c y k" <ckyk@eudoramail.com>
- Re: 1999 5.3 liter Vortec V-8
- From: "c y k" <ckyk@eudoramail.com>
- Trials and tribulations
- From: rr <RRauscher@nni.com>
- Re: Trials and tribulations
- From: garwillis@msn.com (Garfield Willis)
- Re: 1999 5.3 liter Vortec V-8
- From: "c y k" <ckyk@eudoramail.com>
- Re: 1999 5.3 liter Vortec V-8
- From: "c y k" <ckyk@eudoramail.com>
- Re: Trials and tribulations
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1999 5.3 liter Vortec V-8-B/S
- From: Len Sabatine <sabatine@epix.net>
- EFI ramblings
- From: rr <RRauscher@nni.com>
- Re: Trials and tribulations
- From: rr <RRauscher@nni.com>
- Re: EFI ramblings
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1999 5.3 liter Vortec V-8
- Re: EFI ramblings
- From: rr <RRauscher@nni.com>
- Re: 1999 5.3 liter Vortec V-8
- From: "c y k" <ckyk@eudoramail.com>
- Re: Trials and tribulations
- From: garwillis@msn.com (Garfield Willis)
- Re: Mods to '85 GM TPI ECM
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: EFI ramblings
- From: Ludis Langens <ludis@cruzers.com>
- Re: Mods to '85 GM TPI ECM
- From: Ludis Langens <ludis@cruzers.com>
- Re: Trials and tribulations
- From: rr <RRauscher@nni.com>
- Re: EFI ramblings
- From: rr <RRauscher@nni.com>
- Re: Mods to '85 GM TPI ECM
- From: romans@starstream.net (Romans, Mark)
- Re: Mods to '85 GM TPI ECM
- From: "Bruce Plecan" <nacelp@bright.net>
- '151 from a turbo sunbird?
- Re: '151 from a turbo sunbird?
- Re: 1999 5.3 liter Vortec V-8
- Re: 1999 5.3 liter Vortec V-8
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Programming 101
- Re: Trials and tribulations
- From: "Rob Higgins" <rhiggins@cavva.com.au>
- RE: GM Wiper circuit question
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: How to do 165 to 730
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Mods to '85 GM TPI ECM
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Mods to '85 GM TPI ECM
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Automotive Circuit Protection - Part 2
- From: Pat Ford <pford@qnx.com>
- Re: State/Federal Tax - was Re: Scoggin-Dickey
- From: Pat Ford <pford@qnx.com>
- Re: Automotive Circuit Protection - Part 2
- From: garwillis@msn.com (Garfield Willis)
- Re: Automotive Circuit Protection - Part 2
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: Automotive Circuit Protection - Part 2
- From: garwillis@msn.com (Garfield Willis)
- Re: Automotive Circuit Protection - Part 2
- From: Pat Ford <pford@qnx.com>
- Re: Automotive Circuit Protection - Part 2
- From: "Bruce Plecan" <nacelp@bright.net>
- Interesting Diddy
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1999 5.3 liter Vortec V-8
- From: "c y k" <ckyk@eudoramail.com>
- Re: 1999 5.3 liter Vortec V-8
- From: "c y k" <ckyk@eudoramail.com>
- Strange ALDL Blather
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Strange ALDL Blather
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: FAQ ideas
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Automotive Circuit Protection - Part 2
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: FAQ ideas, shifting gears, fuel pump thingy, 1st reply, no efi of signifigance
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Strange ALDL Blather
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Ground Loops (non aviation)
- From: Scot Sealander <Sealand@clarityconnect.com>
- Battery jumping
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Strange ALDL Blather
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Strange ALDL Blather
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: Strange ALDL Blather
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Interesting Diddy
- From: Len Sabatine <sabatine@epix.net>
- Re: Ground Loops (non aviation)
- From: Shannen Durphey <shannen@grolen.com>
- Re: Strange ALDL Blather
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: 1999 5.3 liter Vortec V-8
- From: romans@starstream.net (Romans, Mark)
- Re: Strange ALDL Blather
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: Ground Loops (non aviation)
- From: Jennifer Green & Scott Peitzsch <jlg-sep@mediaone.net>
- 730 vs 727 Question
- From: romans@starstream.net (Romans, Mark)
- CSH required - Re: Battery jumping
- From: Peter Gargano <peter@techedge.com.au>
- Re: 730 vs 727 Question
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Strange ALDL Blather
- From: "Rodney Fulk" <elixir@pathwaynet.com>
- [ADMIN] Out of order messages
- RE: FAQ ideas
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Fw: SOFTWARE LAWS
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- RE: FAQ ideas, shifting gears, fuel pump thingy, 1st reply, no e fi of signifigance
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: FAQ ideas, shifting gears, fuel pump thingy, 1st reply, no e fi of signifigance
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: 1999 5.3 liter Vortec V-8
- From: "c y k" <ckyk@eudoramail.com>
- Re: 1999 5.3 liter Vortec V-8
- From: "c y k" <ckyk@eudoramail.com>
- Re: Ground Loops (non aviation)
- From: Pat Ford <pford@qnx.com>
- Re: Knock Sensor Question
- From: Squash <realsquash@yahoo.com>
- TBI SPACER ?
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: State/Federal Tax - was Re: Scoggin-Dickey
- From: "Dave Plummer" <davepl@MICROSOFT.com>
- RE: TBI SPACER ?
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: TBI SPACER ?
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: TBI SPACER ?
- Re: I tire of bruce plecans childish threats- just a clarification
- Re: TBI SPACER ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ground Loops (non aviation)
- From: "Bruce Plecan" <nacelp@bright.net>
- Benching a '165
- From: Andrew Mattei <amattei@mindspring.com>
- Duty Cycle and VE ??
- From: Squash <realsquash@yahoo.com>
- Re: Benching a '165
- From: Peter Gargano <peter@techedge.com.au>
- Re: How to do 165 to 730
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: .bin .ecu info
- From: Peter Gargano <peter@techedge.com.au>
- Re: big block fi
- From: "Walter Sherwin" <wsherwin@home.com>
- Peugots using GM ECUs?
- From: Peter Gargano <peter@techedge.com.au>
- Re: Duty Cycle and VE ??
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Duty Cycle and VE ??
- From: Roger Heflin <rah@horizon.hit.net>
- Re: I tire of bruce plecans childish threats- just a clarification
- From: David Cooley <n5xmt@bellsouth.net>
- Re: How to do 165 to 730
- From: romans@starstream.net (Romans, Mark)
- Re: How to do 165 to 730
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Benching a '165
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: BPW and Cylinder Vol.?
- From: Shannen Durphey <shannen@grolen.com>
- Re: How to do 165 to 730
- From: romans@starstream.net (Romans, Mark)
- Re: BPW and Cylinder Vol.?
- From: romans@starstream.net (Romans, Mark)
- Re: How to do 165 to 730
- From: Shannen Durphey <shannen@grolen.com>
- Re: How to do 165 to 730
- From: Shannen Durphey <shannen@grolen.com>
- Re: How to do 165 to 730
- From: "Bruce Plecan" <nacelp@bright.net>
- Miss under pressure....
- From: Shannen Durphey <shannen@grolen.com>
- Re: How to do 165 to 730
- From: romans@starstream.net (Romans, Mark)
- Re: BPW and Cylinder Vol.?
- From: Shannen Durphey <shannen@grolen.com>
- Re: How to do 165 to 730
- From: romans@starstream.net (Romans, Mark)
- Re: BPW and Cylinder Vol.?
- From: romans@starstream.net (Romans, Mark)
- Re: Miss under pressure....
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Peugots using GM ECUs?
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Quick OBD-II question, I think
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Miss under pressure....
- From: Len Sabatine <sabatine@epix.net>
- Re: Quick OBD-II question, I think
- From: Andrew Mattei <amattei@mindspring.com>
- Re: BPW and Cylinder Vol.?
- From: Squash <realsquash@yahoo.com>
- Re: Duty Cycle and VE ??
- From: Squash <realsquash@yahoo.com>
- Re: Quick OBD-II question, I think
- From: Len Sabatine <sabatine@epix.net>
- Re: Miss under pressure....
- RE: Quick OBD-II question, I think
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: BPW and Cylinder Vol.?
- RE: Quick OBD-II question, I think
- From: Len Sabatine <sabatine@epix.net>
- Re: 1998 O2 sensor
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: 1999 5.3 liter Vortec V-8
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: BPW and Cylinder Vol.?
- From: "Bruce Plecan" <nacelp@bright.net>
- TC lockup problems
- From: "TRAX" <trax@frederickmd.com>
- 305 vs. 350 TPI 730 EPROMs
- From: "TRAX" <trax@frederickmd.com>
- Re: TC lockup problems
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TC lockup problems
- From: Roger Heflin <rah@horizon.hit.net>
- Re: TC lockup problems
- From: Roger Heflin <rah@horizon.hit.net>
- Re: TC lockup problems
- From: Rick Lindstedt <rick@mafb.org>
- Re: TC lockup problems
- From: Roger Heflin <rah@horizon.hit.net>
- RE: TC lockup problems
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: BPW and Cylinder Vol.?
- From: rr <RRauscher@nni.com>
- Re: 305 vs. 350 TPI 730 EPROMs
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 305 vs. 350 TPI 730 EPROMs
- From: rr <RRauscher@nni.com>
- RE: TC lockup problems
- From: "TRAX" <trax@frederickmd.com>
- EGOR Pricing Announcement (Commercial)
- From: garwillis@msn.com (Garfield Willis)
- Re: BPW and Cylinder Vol.?
- From: garwillis@msn.com (Garfield Willis)
- Re: TC lockup problems
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EGOR Pricing Announcement (Commercial)
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: EGOR Pricing Announcement (Commercial)
- From: garwillis@msn.com (Garfield Willis)
- RE: EGOR Pricing Announcement (Commercial)
- From: "Jason Bonie" <gmecmml@cfl.rr.com>
- Re: Technical Questions
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: Technical Questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Test - Ignore
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: TC lockup problems
- RE: TC lockup problems
- From: Roger Heflin <rah@horizon.hit.net>
- Tailpipe Probing of EGO
- From: garwillis@msn.com (Garfield Willis)
- Re: BPW and Cylinder Vol.?
- From: Shannen Durphey <shannen@grolen.com>
- 89 memcal chip#'s, the other ones...
- From: Shannen Durphey <shannen@grolen.com>
- Re: 89 memcal chip#'s, the other ones...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Quick OBD-II question, I think
- From: David Cooley <n5xmt@bellsouth.net>
- Re: 1998 O2 sensor
- From: Len Sabatine <sabatine@epix.net>
- Closed loop tuning
- From: rr <RRauscher@nni.com>
- Re: 1998 O2 sensor
- From: garwillis@msn.com (Garfield Willis)
- How to read the anht_hac...
- From: "TRAX" <trax@frederickmd.com>
- GM Performance EPROMS
- From: "TRAX" <trax@frederickmd.com>
- Re: Miss under pressure....
- From: Shannen Durphey <shannen@grolen.com>
- Re: GM Performance EPROMS
- From: "Bruce Plecan" <nacelp@bright.net>
- web site help
- From: "Jeffery Green" <jlg@bellsouth.net>
- Re: How to read the anht_hac...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: web site help
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Closed loop tuning
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: How to read the anht_hac...
- From: Marc Randolph <mrand@pobox.com>
- Re: 89 memcal chip#'s, the other ones...
- From: Ludis Langens <ludis@cruzers.com>
- Re: How to read the anht_hac...
- From: Ludis Langens <ludis@cruzers.com>
- Re: Technical Questions
- From: Ludis Langens <ludis@cruzers.com>
- Re: Technical Questions
- From: Shannen Durphey <shannen@grolen.com>
- Re: 89 memcal chip#'s, the other ones...
- From: Shannen Durphey <shannen@grolen.com>
- RE: TC lockup problems
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: EGOR Pricing Announcement (Commercial)
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: EGOR Pricing Announcement (Commercial)
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Tailpipe Probing of EGO
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: 89 memcal chip#'s, the other ones...
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- Newbie seeking advise
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- Re: 1998 O2 sensor
- From: David Cooley <n5xmt@bellsouth.net>
- Seeking an '808 '165 hack
- From: "black maj" <blackmin@hotmail.com>
- Re: BPW and Cylinder Vol.?
- From: Squash <realsquash@yahoo.com>
- Re: Seeking an '808 '165 hack
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BPW and Cylinder Vol.?
- From: Roger Heflin <rah@horizon.hit.net>
- Re: BPW and Cylinder Vol.?
- From: Squash <realsquash@yahoo.com>
- Re: BPW and Cylinder Vol.?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EGOR Pricing Announcement (Commercial)
- From: garwillis@msn.com (Garfield Willis)
- Re: EGOR Pricing Announcement (Commercial)
- From: garwillis@msn.com (Garfield Willis)
- Re: BPW and Cylinder Vol.?
- From: Squash <realsquash@yahoo.com>
- Re: Tailpipe Probing of EGO
- From: garwillis@msn.com (Garfield Willis)
- Re: BPW and Cylinder Vol.?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BPW and Cylinder Vol.?
- From: Roger Heflin <rah@horizon.hit.net>
- Speed Density ECM
- From: Eric Norgard <eric@aztek-eng.com>
- Re: BPW and Cylinder Vol.?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Newbie seeking advise
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BPW and Cylinder Vol.?
- Re: BPW and Cylinder Vol.?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BPW and Cylinder Vol.?
- From: Squash <realsquash@yahoo.com>
- Re: BPW and Cylinder Vol.?
- From: Squash <realsquash@yahoo.com>
- Re: 1998 O2 sensor
- From: garwillis@msn.com (Garfield Willis)
- Anyone know anything about negotiating severance packages?
- From: "Kevin R" <KEReyn@gte.net>
- sending ecms
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1999 5.3 liter Vortec V-8
- From: "Programmer" <nwester@eidnet.org>
- intake robbery - was Re: Tailpipe Probing of EGO
- From: Peter Gargano <peter@ntserver.techedge.com.au>
- Re: intake robbery - was Re: Tailpipe Probing of EGO
- From: "Bruce Plecan" <nacelp@bright.net>
- How to send
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Newbie seeking advise
- Re: 1999 5.3 liter Vortec V-8
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: Newbie seeking advise
- From: "Bruce Plecan" <nacelp@bright.net>
- I was invited to, min EFI content
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Tailpipe Probing of EGO
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: 1998 O2 sensor
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: TC lockup problems - 305 spark
- Re: 1998 O2 sensor
- From: David Cooley <n5xmt@bellsouth.net>
- Re: I was invited to, min EFI content
- EBAY tidbit
- Re: Newbie seeking advise
- From: Len Sabatine <sabatine@epix.net>
- Mystery .bin at incoming
- From: Shannen Durphey <shannen@grolen.com>
- Re: 89 memcal chip#'s, the other ones...
- From: Shannen Durphey <shannen@grolen.com>
- Update from CSH, HQ No EFI Why Grumpy
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Newbie seeking advise
- From: Shannen Durphey <shannen@grolen.com>
- AKSN1175
- From: Shannen Durphey <shannen@grolen.com>
- Re: How to send
- From: rr <RRauscher@nni.com>
- Re: Speed Density ECM
- From: "TK" <terryk@foothill.net>
- Re: Newbie seeking advise
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: I was invited to, min EFI content
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1999 5.3 liter Vortec V-8
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: Tailpipe Probing of EGO
- From: garwillis@msn.com (Garfield Willis)
- EFIinfo.doc
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: How to send
- From: "Bruce Plecan" <nacelp@bright.net>
- 400 RPM Diacom
- From: Squash <realsquash@yahoo.com>
- Re: BPW and Cylinder Vol.?
- From: Squash <realsquash@yahoo.com>
- OFF-LIST: Non-efi question
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- 749 question -
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: 749 question -
- From: "Bruce Plecan" <nacelp@bright.net>
- source for bins
- From: Aaron G Kallotte <akallotte@juno.com>
- Re: TBI SPACER ?
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Electric Air Pump wanted
- From: terry_kelley@hp.com
- Re: Electric Air Pump wanted
- From: Andrew Mattei <amattei@mindspring.com>
- RE: TBI SPACER ?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: OFF-LIST: Non-efi question
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: OFF-LIST: Non-efi question
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: OFF-LIST: Non-efi question
- From: Peter Gargano <peter@techedge.com.au>
- Re: source for bins
- From: Shannen Durphey <shannen@grolen.com>
- Re: EFIinfo.doc
- From: Brian L Massey <blocklm@juno.com>
- ECM's MAF or MAP
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: OFF-LIST: Non-efi question
- From: "Bruce Plecan" <nacelp@bright.net>
- 16198267 ID?
- From: "Jon Fedock" <Galadar@worldnet.att.net>
- Re: ECM's MAF or MAP
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: source for bins
- From: Aaron G Kallotte <akallotte@juno.com>
- Re: source for bins
- From: Shannen Durphey <shannen@grolen.com>
- Supercharger: MAF or MAP?
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: 16198267 ID?
- From: Shannen Durphey <shannen@grolen.com>
- Re: OFF-LIST: Non-efi question
- From: Peter Gargano <peter@techedge.com.au>
- VSS question (off topic)
- From: "Jeffery Green" <jlg@bellsouth.net>
- Vortec 8 bolt to 12 bolt conversion
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: ECM's MAF or MAP
- From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
- Re: Vortec 8 bolt to 12 bolt conversion
- From: Shannen Durphey <shannen@grolen.com>
- Re: larifying info: Vortec 8 bolt to 12 bolt conversion
- From: Shannen Durphey <shannen@grolen.com>
- Re: Vortec 8 bolt to 12 bolt conversion
- From: "Mike" <itsmike@lvcm.com>
- Re: Vortec 8 bolt to 12 bolt conversion
- From: Shannen Durphey <shannen@grolen.com>
- Re: 749 question -
- From: "Green" <green@nlenx.com>
- Re: OFF-LIST: Non-efi question
- From: Peter Gargano <peter@techedge.com.au>
- New Definition Update
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Vortec 8 bolt to 12 bolt conversion
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: New Definition Update
- From: "black maj" <blackmin@hotmail.com>
- Q-Jet sec size
- From: rr <RRauscher@nni.com>
- Re: New Definition Update
- From: rr <RRauscher@nni.com>
- Re: New Definition Update
- From: rr <RRauscher@nni.com>
- Re: Speed Density ECM
- From: Ludis Langens <ludis@cruzers.com>
- RE: OFF-LIST: Non-efi question
- From: "Mike Rolica" <97005620@lambton.on.ca>
- RE: OFF-LIST: Non-efi question
- From: "Mike Rolica" <97005620@lambton.on.ca>
- Re: How to send
- Re: Q-Jet sec size
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 16198267 ID?
- From: "Jon Fedock" <Galadar@worldnet.att.net>
- Re: Q-Jet sec size
- Re: Q-Jet sec size
- From: bearbvd@cmn.net (Greg Hermann)
- Re: Q-Jet sec size
- From: Shannen Durphey <shannen@grolen.com>
- Re: 749 Question
- From: Dig <turbodig@yahoo.com>
- ECM interchangability?
- From: Daniel Houlton <houlster@user1.inficad.com>
- Re: Speed Density ECM
- From: "TK" <terryk@foothill.net>
- Re: New Definition Update
- From: General Motors <a1227ecm@yahoo.com>
- Re: ECM interchangability on a DOHC
- From: "TK" <terryk@foothill.net>
- Re: ECM interchangability?
- New email...
- From: David Cooley <n5xmt@triad.rr.com>
- Re: ECM interchangability?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Propane EFI
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: OFF-LIST: Non-efi question
- From: "Kevin R" <KEReyn@gte.net>
- RE: Q-Jet sec size
- From: Marc Piccioni <piccioni@cadvision.com>
- non - efi AFR heads for sale
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: Q-Jet sec size
- From: bearbvd@cmn.net (Greg Hermann)
- Format of WinBin .ECU file - tutorial/help page?
- From: Peter Gargano <peter@techedge.com.au>
- Re: OFF-LIST: Non-efi question
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Ambidextrous software
- From: Ludis Langens <ludis@cruzers.com>
- Re: ECM interchangability?
- From: Ludis Langens <ludis@cruzers.com>
- 8192 baud 1227808 project.
- From: Peter Gargano <peter@techedge.com.au>
- Re: Q-Jet sec size
- From: rr <RRauscher@nni.com>
- Re: Q-Jet sec size
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 8192 baud 1227808 project.
- From: "Bruce Plecan" <nacelp@bright.net>
- On The Fly Tuning (OTFT) - was Re: 8192 baud 1227808 project.
- From: Peter Gargano <peter@techedge.com.au>
- Re: On The Fly Tuning (OTFT) - was Re: 8192 baud 1227808 project.
- From: "Bruce Plecan" <nacelp@bright.net>
- ECM for sale..
- From: Marc Piccioni <piccioni@cadvision.com>
- RE: OFF-LIST: Non-efi question
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: I tire of bruce plecans childish threats
- From: Carl Summers <InTech@writeme.com>
- Re: Ambidextrous software
- Vortec Problem #2
- From: Brent Obermiller <ober_b@sssnet.com>
- bad .bin on FTP server
- From: "NickG" <nikog@mediaone.net>
- RE: Vortec Problem #2
- From: Carl Summers <InTech@writeme.com>
- Re: On The Fly Tuning (OTFT)
- From: GM injection <turboalfa@excite.com>
- Re: bad .bin on FTP server
- From: Shannen Durphey <shannen@grolen.com>
- Re: Vortec Problem #2
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: On The Fly Tuning (OTFT)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Miss under pressure....
- From: Rodney Davis <rodldavis@home.com>
- Re: Q-Jet sec size
- From: rr <RRauscher@nni.com>
- PCM's measuring torque.
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- MAF BLM based tuning
- From: "Dave Zug" <dzug@delanet.com>
- MAF BLM based tuning
- From: "Dave Zug" <dzug@delanet.com>
- Crankshaft sensor
- From: "K.E. Towle" <karljiml@compuserve.com>
- BINs needed
- From: "K.E. Towle" <karljiml@compuserve.com>
- Re: PCM's measuring torque.
- From: "Dave Zug" <dzug@delanet.com>
- Re: PCM's measuring torque.
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Q-Jet sec size
- From: Shannen Durphey <shannen@grolen.com>
- Re: Miss under pressure....
- From: Shannen Durphey <shannen@grolen.com>
- Re: Crankshaft sensor
- From: Shannen Durphey <shannen@grolen.com>
- Re: PCM's measuring torque.
- From: Shannen Durphey <shannen@grolen.com>
- Re: PCM's measuring torque.
- RE: Crankshaft sensor
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: PCM's measuring torque.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Crankshaft sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- persnickety '747s
- From: rr <RRauscher@nni.com>
- PI closed loop algorithm for 1227747 ECU?
- From: Scott Lundahl <scott@lumenetics.com>
- Re: MAF BLM based tuning
- From: rr <RRauscher@nni.com>
- Re: bad .bins on FTP server
- From: "NickG" <nikog@mediaone.net>
- Re: I tire of bruce plecans childish threats
- From: "Programmer" <nwester@eidnet.org>
- Re: Q-Jet sec size
- From: rr <RRauscher@nni.com>
- Re: bad .bins on FTP server
- From: Kevin Crain <kevin@warpten.com>
- Re: PI closed loop algorithm for 1227747 ECU?
- From: rr <RRauscher@nni.com>
- LS1 Hack?
- From: "Dave & Irina Eicher" <sailors@mwci.net>
- Re: PCM's measuring torque.
- From: David Cooley <n5xmt@triad.rr.com>
- Re: bad .bins on FTP server
- From: Shannen Durphey <shannen@grolen.com>
- Re: PCM's measuring torque.
- From: Len Sabatine <sabatine@epix.net>
- Re: Q-Jet sec size
- ECM for forced induction
- From: "C. Brooks" <cbrooks1@tqci.net>
- Re: ECM for forced induction
- From: Shannen Durphey <shannen@grolen.com>
- Re: A little vague...ECM for forced induction
- From: Shannen Durphey <shannen@grolen.com>
- Re: A little vague...ECM for forced induction
- From: "Bruce Plecan" <nacelp@bright.net>
- Broken timing gear
- '870 to '165 swap.....
- From: "Craig Marcho" <marcho@flash.net>
- Re: Broken timing gear
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: bad .bin on FTP server
- From: steve ravet <sravet@arm.com>
- Bench tests needed...
- From: Shannen Durphey <shannen@grolen.com>
- Re: Bench tests needed...
- From: Ludis Langens <ludis@cruzers.com>
- GM Efi to Rover 3.5
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- RE: ECM for forced induction
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: GM Efi to Rover 3.5
- From: Ludis Langens <ludis@cruzers.com>
- Re: ECM for forced induction
- From: Ludis Langens <ludis@cruzers.com>
- Re: Bench tests needed...
- From: Shannen Durphey <shannen@grolen.com>
- Re: PI closed loop algorithm for 1227747 ECU?
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- RE: ECM for forced induction
- From: "cbrooks1 " <cbrooks1@mail.tqci.net>
- Re: PCM's measuring torque.
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- FOR SALE: misc. calibration parts and a modified GM ECM on ebay
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- RE: ECM for forced induction
- From: "Jeffrey Scott" <jws6367@mailcity.com>
- 730 Memcal was... RE: MAF BLM based tuning
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- 165 Main spark table
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: PCM's measuring torque.
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Broken timing gear
- Re: MAF BLM based tuning
- From: "Dave Zug." <dzug@delanet.com>
- Re: 165 Main spark table
- From: "Dave Zug." <dzug@delanet.com>
- ECM info sought...
- From: Oliver Scholz <luke@dagobah.franken.de>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM info sought...
- From: steve ravet <sravet@arm.com>
- Re: bad .bin on FTP server
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '870 to '165 swap.....
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Bench tests needed...
- From: Ludis Langens <ludis@cruzers.com>
- Ha, '747 anti-flood
- From: rr <RRauscher@nni.com>
- Re: PI closed loop algorithm for 1227747 ECU?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: bad .bin on FTP server
- From: steve ravet <sravet@arm.com>
- Re: 730 Memcal was... RE: MAF BLM based tuning
- From: Bob Valentine <bob@tecmark.com>
- Re: 730 Memcal was... RE: MAF BLM based tuning
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: Bench tests needed...
- From: Shannen Durphey <shannen@grolen.com>
- 730 Memcal decode
- From: Davis <davis@mail.eecis.udel.edu>
- Re: 730 Memcal decode
- From: Shannen Durphey <shannen@grolen.com>
- Re: 730 Memcal decode
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MAF BLM based tuning
- From: Shannen Durphey <shannen@grolen.com>
- Anyone else interested in Rochester FI??
- From: Shannen Durphey <shannen@grolen.com>
- Re: PI closed loop algorithm for 1227747 ECU?
- From: Scott Lundahl <scott@lumenetics.com>
- Re: Crankshaft sensor
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- RE: '870 to '165 swap.....
- From: "Craig Marcho" <marcho@flash.net>
- Re: BINs needed
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: PI closed loop algorithm for 1227747 ECU?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Anyone else interested in Rochester FI??
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '870 to '165 swap.....
- From: Shannen Durphey <shannen@grolen.com>
- Re: '870 to '165 swap.....
- From: "Bruce Plecan" <nacelp@bright.net>
- Mandatory TC Lockup
- From: "TRAX" <trax@frederickmd.com>
- Re: ECM for forced induction
- From: Bill Shaw <bshaw@connix.com>
- Re: Mandatory TC Lockup
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Mandatory TC Lockup
- From: Shannen Durphey <shannen@grolen.com>
- Inverted flight EFI?
- Re: Mandatory TC Lockup
- From: "TK" <terryk@foothill.net>
- Re: ECM for forced induction
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Anyone else interested in Rochester FI??
- From: Len Sabatine <sabatine@epix.net>
- Re: Mandatory TC Lockup
- From: "TK" <terryk@foothill.net>
- Re: Mandatory TC Lockup
- From: "TK" <terryk@foothill.net>
- Re: Inverted flight EFI?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Mandatory TC Lockup
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Anyone else interested in Rochester FI??
- From: Doug Dayson <djdayson@home.com>
- Re: Anyone else interested in Rochester FI??
- From: bearbvd@cmn.net (Greg Hermann)
- Re: '870 to '165 swap.....
- From: Ludis Langens <ludis@cruzers.com>
- Re: Bench tests needed...
- From: Ludis Langens <ludis@cruzers.com>
- Thanks for the help
- From: "K.E. Towle" <karljiml@compuserve.com>
- Re: 730 Memcal was... RE: MAF BLM based tuning
- From: "K.E. Towle" <karljiml@compuserve.com>
- RE: Anyone else interested in Rochester FI??
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: Anyone else interested in Rochester FI??
- From: Shannen Durphey <shannen@grolen.com>
- Re: Bench tests needed...
- From: Shannen Durphey <shannen@grolen.com>
- Re: Mandatory TC Lockup
- From: Rick Lindstedt <rick@mafb.org>
- Re: Mandatory TC Lockup
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: BINs needed
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Mandatory TC Lockup
- From: Rick Lindstedt <rick@mafb.org>
- puzzled by almighty memcal.
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Mandatory TC Lockup
- From: Rick Lindstedt <rick@mafb.org>
- Re: PI closed loop algorithm for 1227747 ECU?
- From: Squash <realsquash@yahoo.com>
- RE: Anyone else interested in Rochester FI??
- From: Don.F.Broadus@ucm.com
- Re: Mandatory TC Lockup
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Mandatory TC Lockup
- From: Rick Lindstedt <rick@mafb.org>
- engine control unit
- From: Don.F.Broadus@ucm.com
- Re: Anyone else interested in Rochester FI??
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Mandatory TC Lockup
- From: "TRAX" <trax@frederickmd.com>
- Re: Mandatory TC Lockup
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Mandatory TC Lockup
- From: "Bruce Plecan" <nacelp@bright.net>
- O2 Inte delays
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: PI closed loop algorithm for 1227747 ECU?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Mandatory TC Lockup
- From: steve ravet <sravet@arm.com>
- Re: Anyone else interested in Rochester FI??
- From: John Bachman <jdbachman@redrose.net>
- Re: BINs needed
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Inverted flight EFI?
- Re: BINs needed
- From: steve ravet <sravet@arm.com>
- new bins uploaded
- From: steve ravet <sravet@arm.com>
- BDJS Bin?
- From: "TK" <terryk@foothill.net>
- Re: BDJS Bin?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: PI closed loop algorithm for 1227747 ECU?
- From: Scott Lundahl <scott@lumenetics.com>
- Connector Pins for '747 ECU
- From: Scott Lundahl <lundahls@dusapharma.com>
- VSS ?
- From: Scott Lundahl <lundahls@dusapharma.com>
- LTD1 Emulator
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: PI closed loop algorithm for 1227747 ECU?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Connector Pins for '747 ECU
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: VSS ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Connector Pins for '747 ECU
- From: steve ravet <sravet@arm.com>
- Re: ECM for forced induction
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: Inverted flight EFI?
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: PI closed loop algorithm for 1227747 ECU?
- From: rr <RRauscher@nni.com>
- Re: Anyone else interested in Rochester FI??
- From: rr <RRauscher@nni.com>
- Delivery failure (shannen@grolen.com)
- From: postmaster@postal.grolen.com
- Delivery failure (shannen@grolen.com)
- From: postmaster@postal.grolen.com
- Inline VSS
- From: Bob Valentine <bob@tecmark.com>
- Re: VSS ?
- From: Bob Valentine <bob@tecmark.com>
- Re: Connector Pins for '747 ECU
- From: Shannen Durphey <shannen@grolen.com>
- Re: VSS ?
- From: Shannen Durphey <shannen@grolen.com>
- Re: VSS ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Connector Pins for '747 ECU
- From: "Kevin R" <KEReyn@gte.net>
- Power Data Graph - Was Re MAF BLM based tuning
- From: "Dave Zug" <dzug@delanet.com>
- Re: Power Data Graph - Was Re MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Connector Pins for '747 ECU
- From: "K.E. Towle" <karljiml@compuserve.com>
- Re: ECM for forced induction
- From: Ludis Langens <ludis@cruzers.com>
- Re: new bins uploaded
- From: Ludis Langens <ludis@cruzers.com>
- VSS ?
- From: "K.E. Towle" <karljiml@compuserve.com>
- LT1 Comp
- From: "Programmer" <nwester@eidnet.org>
- Re: Connector Pins for '747 ECU
- Wierd TCC lockup ... can u explain it?
- From: "TRAX" <trax@frederickmd.com>
- RE: Wierd TCC lockup ... can u explain it?
- From: Carl Summers <InTech@writeme.com>
- Re: ECM for forced induction
- From: "black maj" <blackmin@hotmail.com>
- Re: Wierd TCC lockup ... can u explain it?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Connector Pins for '747 ECU
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Connector Pins for '747 ECU
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: VSS ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Abbrviations General EFI
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Connector Pins for '747 ECU
- From: Scott Lundahl <scott@lumenetics.com>
- Re: Abbrviations General EFI
- From: "black maj" <blackmin@hotmail.com>
- Re: Abbrviations General EFI
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Connector Pins for '747 ECU
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Abbrviations General EFI
- From: "Bruce Plecan" <nacelp@bright.net>
- Anyone with X-fires for sale?
- From: "Kevin R" <KEReyn@gte.net>
- Fw: Anyone with X-fires for sale?
- From: "Kevin R" <KEReyn@gte.net>
- Re: Abbrviations General EFI
- From: "black maj" <blackmin@hotmail.com>
- Re: Abbrviations General EFI
- From: "black maj" <blackmin@hotmail.com>
- Re: Abbreviations General EFI
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: VSS ?
- From: Bob Valentine <bob@tecmark.com>
- Re: VSS ?
- From: Shannen Durphey <shannen@grolen.com>
- Re: Abbrviations General EFI
- From: Shannen Durphey <shannen@grolen.com>
- Re: new bins uploaded
- From: Shannen Durphey <shannen@grolen.com>
- Re: pt 2, new bins uploaded
- From: Shannen Durphey <shannen@grolen.com>
- Re: Abbrviations General EFI
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- RE: Inline VSS
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: VSS ?
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Abbreviations General EFI
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Abbrviations General EFI
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- Re: VSS ?
- From: "Sutcliffe, Peter" <Peter.Sutcliffe@team.telstra.com>
- Re: Abbreviations General EFI
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Abbrviations General EFI
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: Abbrviations General EFI
- From: Squash <realsquash@yahoo.com>
- Re: new bins uploaded
- From: steve ravet <sravet@arm.com>
- Hiway mode spark and fuel ??
- From: Squash <realsquash@yahoo.com>
- Re: Hiway mode spark and fuel ??
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Abbreviations General EFI
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Hiway mode spark and fuel ??
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: Inverted flight EFI?
- From: "Dave Zug" <dzug@delanet.com>
- Inverted flight EFI? (Grumpy's inna mood)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MAF BLM based tuning
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: ECM interchangability?
- From: Daniel Houlton <houlster@inficad.com>
- Re: ECM interchangability?
- From: "TK" <terryk@foothill.net>
- Comment on the "Abbreviations" Thread Tizzy
- From: garwillis@msn.com (Garfield Willis)
- Archive utility (was Re: ECM interchangability?)
- From: Daniel Houlton <houlster@inficad.com>
- Re: puzzled by almighty memcal.
- From: Ludis Langens <ludis@cruzers.com>
- Re: Hiway mode spark and fuel ??
- From: Len Sabatine <sabatine@epix.net>
- Re: Hiway mode spark and fuel ??
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Hiway mode spark and fuel ??
- From: Len Sabatine <sabatine@epix.net>
- Re: puzzled by almighty memcal.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Comment on the "Abbreviations" Thread Tizzy
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Comment on the "Abbreviations" Thread Tizzy
- From: garwillis@msn.com (Garfield Willis)
- Re: ECM for forced induction
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- butterfly whistle, and cure
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM for forced induction
- From: "Bruce Plecan" <nacelp@bright.net>
- Heads-up
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Comment on the "Abbreviations" Thread Tizzy
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM for forced induction
- From: Daniel Houlton <houlster@user1.inficad.com>
- CCC Mods
- From: "Bruce Plecan" <nacelp@bright.net>
- Misc pics,
- From: "Bruce Plecan" <nacelp@bright.net>
- LT1 files ?
- From: "Programmer" <nwester@eidnet.org>
- Re: Misc pics,
- From: "Kevin R" <KEReyn@gte.net>
- Re: LT1 files ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Bins needed
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- RE: Bins needed
- From: Marc Piccioni <piccioni@cadvision.com>
- open loop non-cat bins
- From: Marc Piccioni <piccioni@cadvision.com>
- BCC ID help...
- Re: BCC ID help...
- From: "Bruce Plecan" <nacelp@bright.net>
- Hello
- From: "Rodney Fulk" <elixir@pathwaynet.com>
- Re: BCC ID help...
- Re: BCC ID help...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Format of WinBin .ECU file - tutorial/help page?
- From: "Programmer" <nwester@eidnet.org>
- Re: Inverted flight EFI? (Grumpy's inna mood)
- From: "Dave Zug" <dzug@delanet.com>
- Re: Inverted flight EFI? (Grumpy's inna mood) Fuel temp
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Inverted flight EFI? (Grumpy's inna mood) Fuel temp
- From: "Dave Zug" <dzug@delanet.com>
- Re: LT1 files ?
- From: "Programmer" <nwester@eidnet.org>
- Re: open loop non-cat bins
- From: "Programmer" <nwester@eidnet.org>
- Re: LT1 files ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Misc pics,
- From: Bob Valentine <bob@tecmark.com>
- Re: BCC ID help...
- From: Shannen Durphey <shannen@grolen.com>
- Re: LT1 files ?
- From: Shannen Durphey <shannen@grolen.com>
- Re: open loop non-cat bins
- From: Shannen Durphey <shannen@grolen.com>
- Re: Inverted flight EFI? (Grumpy's inna mood) Fuel temp
- From: garwillis@msn.com (Garfield Willis)
- Re: BCC ID help...
- Re: LT1 files ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: LT1 files ?
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: LT1 files ?
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- RE: Misc pics,
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: open loop non-cat bins
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Inverted flight EFI? (Grumpy's inna mood) Fuel temp
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Inverted flight EFI? (Grumpy's inna mood) Fuel temp
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Archive utility
- From: Christian Hack <christianh@pdd.edmi.com.au>
- Re: LT1 files ?
- From: Len Sabatine <sabatine@epix.net>
- Re: Hello
- From: Pat Ford <pford@qnx.com>
- Re: open loop non-cat bins
- From: Pat Ford <pford@qnx.com>
- RE: LT1 files
- From: Speartech <speartec@iquest.net>
- Re: LT1 files ?
- From: "Programmer" <nwester@eidnet.org>
- Re: LT1 files ?
- From: "Programmer" <nwester@eidnet.org>
- Re: LT1 files ?
- From: Len Sabatine <sabatine@epix.net>
- EFI POW WOW
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: LT1 files ?
- From: Eric Clark <eclark@hoser.com>
- RE: EFI POW WOW
- From: "Rudi Machilek" <Rudi@vnet.net>
- Re: EFI POW WOW
- From: "Jeffrey Scott" <jws6367@mailcity.com>
- Re: EFI POW WOW
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: EFI POW WOW
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: EFI POW WOW
- From: "Bruce Plecan" <nacelp@bright.net>
- '747 and Proportional Stuff
- From: rr <RRauscher@nni.com>
- Re: LT1 files ?
- From: Len Sabatine <sabatine@epix.net>
- Re: LT1 files
- From: "Programmer" <nwester@eidnet.org>
- EFI POW WOW
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '747 and Proportional Stuff
- From: Scott Lundahl <scott@lumenetics.com>
- RE: LT1 files
- From: Speartech <speartec@iquest.net>
- GM Injector 17109596 ID
- From: Bob Valentine <bob@tecmark.com>
- RE: EFI POW WOW
- From: Mike Rolica <mrolica@meridian-mag.com>
- 1999 5.3 liter Vortec V-8-antitheft
- From: "c y k" <ckyk@eudoramail.com>
- programmers and erasers
- From: "Jim Yeagley" <jyeag@core.com>
- True definition of Knock
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: programmers and erasers
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: EFI POW WOW
- From: Eric Aos <EOA@spartek.com>
- Re: True definition of Knock
- From: Squash <realsquash@yahoo.com>
- RE: True definition of Knock
- From: Eric Aos <EOA@spartek.com>
- Re: True definition of Knock
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: True definition of Knock
- From: Squash <realsquash@yahoo.com>
- Re: True definition of Knock
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EFI POW WOW
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: True definition of Knock
- From: Squash <realsquash@yahoo.com>
- Re: LT1 files
- From: steve ravet <sravet@arm.com>
- Re: True definition of Knock
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: LT1 files
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: LT1 files
- From: "Programmer" <nwester@eidnet.org>
- Re: True definition of Knock
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- RE: True definition of Knock
- From: Squash <realsquash@yahoo.com>
- Re: True definition of Knock
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Buyin Parts
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: True definition of Knock
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '747 and Proportional Stuff
- From: rr <RRauscher@nni.com>
- Tuning a 727 or 730 with a Supercharger
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Robbins Nugent chip holders for the 2732
- Re: Robbins Nugent chip holders for the 2732
- From: "Craig Marcho" <not_valid_email@airmail.net>
- Re: Tuning a 727 or 730 with a Supercharger
- From: "Programmer" <nwester@eidnet.org>
- Re: Tuning a 727 or 730 with a Supercharger
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Robbins Nugent chip holders for the 2732
- Re: Robbins Nugent chip holders for the 2732
- From: "Programmer" <nwester@eidnet.org>
- Re: '747 and Proportional Stuff
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: True definition of Knock
- From: Len Sabatine <sabatine@epix.net>
- Re: Tuning a 727 or 730 with a Supercharger
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: LS1 Hack?
- From: "Programmer" <nwester@eidnet.org>
- Re: LT1 files
- From: Shannen Durphey <shannen@grolen.com>
- Re: Tuning a 727 or 730 with a Supercharger
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: True definition of Knock
- From: Carl Summers <InTech@writeme.com>
- Huntington to Catalina
- From: garwillis@msn.com (Garfield Willis)
- Re: Robbins Nugent chip holders for the 2732
- From: "Kevin R" <KEReyn@gte.net>
- Re: True definition of Knock
- From: "Dave Zug" <dzug@delanet.com>
- Re: Tuning a 727 or 730 with a Supercharger
- From: "Dave Zug" <dzug@delanet.com>
- RE: True definition of Knock
- From: Len Sabatine <sabatine@epix.net>
- Memcal ESC Filter Numbers, was Re: True definition of Knock
- From: Ludis Langens <ludis@cruzers.com>
- Aftermarket Bin dir
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- RE: True definition of Knock
- From: Carl Summers <InTech@writeme.com>
- RE: Huntington to Catalina
- From: Carl Summers <InTech@writeme.com>
- RE: True definition of Knock
- From: Carl Summers <InTech@writeme.com>
- nother car dead..sorta efi...not really gm..ford parts for sale
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: True definition of Knock
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: '747 and Proportional Stuff
- From: Scott Lundahl <scott@lumenetics.com>
- Re: nother car dead..sorta efi...not really gm..ford parts for sale
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: nother car dead..sorta efi...not really gm..ford parts for sale
- FYI - (or maybe not)
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: nother car dead..sorta efi...not really gm..ford parts for sale
- From: "Programmer" <nwester@eidnet.org>
- Re: Aftermarket Bin dir
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Robbins Nugent chip holders for the 2732
- RE: nother car dead..sorta efi...not really gm..ford parts for sa le
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: EFI POW WOW
- From: Squash <realsquash@yahoo.com>
- Re: Huntington to Catalina
- From: garwillis@msn.com (Garfield Willis)
- Engine swap computer & wiring question
- From: "Tim De Coster" <craz1@softhome.net>
- RE: Huntington to Catalina
- From: Carl Summers <InTech@writeme.com>
- Re: Huntington to Catalina
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Engine swap computer & wiring question
- From: steve ravet <sravet@arm.com>
- Re: Huntington to Catalina
- From: garwillis@msn.com (Garfield Willis)
- Re: Engine swap computer & wiring question
- From: "Tim De Coster" <craz1@softhome.net>
- Re: True definition of Knock
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '747 and Proportional Stuff
- From: garwillis@msn.com (Garfield Willis)
- Re: Engine swap computer & wiring question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Engine swap computer & wiring question
- From: steve ravet <sravet@arm.com>
- Re: nother car dead..sorta efi...not really gm..ford parts for sale
- From: Eric Clark <eclark@hoser.com>
- Re: Engine swap computer & wiring question
- From: "Tim De Coster" <craz1@softhome.net>
- Re: nother car dead..sorta efi...not really gm..ford parts for sale
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Engine swap computer & wiring question
- From: "Tim De Coster" <craz1@softhome.net>
- Re: Engine swap computer & wiring question
- From: "Bruce Plecan" <nacelp@bright.net>
- time delay = degrees
- From: Don.F.Broadus@ucm.com
- Re: True definition of Knock
- From: Len Sabatine <sabatine@epix.net>
- Fwd: RE: Oxygen Sensors
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Engine swap computer & wiring question
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: RE: Oxygen Sensors
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Engine swap computer & wiring question
- From: Don.F.Broadus@ucm.com
- Re: Engine swap computer & wiring question
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: nother car dead..sorta efi...not really gm..ford parts for sale
- From: Eric Clark <eclark@hoser.com>
- Re: nother car dead..sorta efi...not really gm..ford parts for sale
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: nother car dead..sorta efi...not really gm..ford parts for sale
- From: "Programmer" <nwester@eidnet.org>
- RE: Huntington to Catalina
- From: Carl Summers <InTech@writeme.com>
- TLC
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: True definition of Knock
- From: Shannen Durphey <shannen@grolen.com>
- Re: Huntington to Catalina
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Huntington to Catalina
- From: Carl Summers <InTech@writeme.com>
- Re: Huntington to Catalina
- From: garwillis@msn.com (Garfield Willis)
- Re: Engine swap computer & wiring question
- From: Todd Israels <israels@mnsi.net>
- Re: FYI - (or maybe not)
- From: Squash <realsquash@yahoo.com>
- Re: Engine swap computer & wiring question
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: time delay = degrees
- From: Shannen Durphey <shannen@grolen.com>
- Re: nother car dead..sorta efi...not really gm..ford parts for sale
- From: Shannen Durphey <shannen@grolen.com>
- Re: nother car dead..sorta efi...not really gm..ford parts for sale
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Re: nother car dead..sorta efi...not really gm..ford parts for sale
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: nother car dead..sorta efi...not really gm..ford parts for sale
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Engine swap computer & wiring question
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Chatting with a 730
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Engine swap computer & wiring question
- From: Ludis Langens <ludis@cruzers.com>
- Re: Engine swap computer & wiring question
- From: Shannen Durphey <shannen@grolen.com>
- RE: Chatting with a 730
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- RE: nother car dead..sorta efi...not really gm..ford parts for sa le
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: time delay = degrees
- From: Don.F.Broadus@ucm.com
- Re: Engine swap computer & wiring question
- From: "Programmer" <nwester@eidnet.org>
- RE: Chatting with a 730
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- RE: Chatting with a 730
- From: Pat Ford <pford@qnx.com>
- Re: Archive idea
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Chatting with a 730
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Chatting with a 730
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: '747 and Proportional Stuff
- From: garwillis@msn.com (Garfield Willis)
- Limited Duration Extra Turbo Boost
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: diy'er causing a recall
- Re: Limited Duration Extra Turbo Boost
- From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
- 332 based ecms
- From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
- '92 Y-body LT1 bin file needed.
- From: "Craig Marcho" <not_valid_email@airmail.net>
- '92 Y-body LT1 bin file needed.
- From: "Craig Marcho" <not_valid_email@airmail.net>
- GM book on TPI/ Gas tank venting on TPI
- From: Vinnie Moscaritolo <vinnie@vmeng.com>
- Re: GM book on TPI/ Gas tank venting on TPI
- From: Squash <realsquash@yahoo.com>
- Re: Engine swap computer & wiring question
- From: "Tim De Coster" <craz1@softhome.net>
- Re: '92 Y-body LT1 bin file needed.
- From: Shannen Durphey <shannen@grolen.com>
- Re: GM book on TPI/ Gas tank venting on TPI
- From: steve ravet <sravet@arm.com>
- Re: '92 Y-body LT1 bin file needed.
- From: Roger Heflin <rah@horizon.hit.net>
- 4L60e transmission question
- From: "Marvin Johnson" <Wdnbtbldr@proaxis.com>
- Re: 4L60e transmission question
- From: steve ravet <sravet@arm.com>
- Re: '747 and Proportional Stuff
- From: garwillis@msn.com (Garfield Willis)
- Re: Engine swap computer & wiring question
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: 4L60e transmission question
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: 4L60e transmission question
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- Re: 4L60e transmission question
- From: Shannen Durphey <shannen@grolen.com>
- TCC lower temp
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: Engine swap computer & wiring question
- From: Todd Israels <israels@mnsi.net>
- TCC lower temp
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: '747 and Proportional Stuff
- From: rr <RRauscher@nni.com>
- Re: GM book on TPI/ Gas tank venting on TPI
- From: rr <RRauscher@nni.com>
- Re: '747 and Proportional Stuff
- From: garwillis@msn.com (Garfield Willis)
- Re: 332 based ecms
- From: "EK" <sk8er@netmost.com>
- Re: TCC lower temp
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '747 and Proportional Stuff
- From: rr <RRauscher@nni.com>
- Re: nother car dead..sorta efi...not really gm..ford parts for sale
- From: "Fran and Bud" <quest100@gte.net>
- Re: Engine swap computer & wiring question
- From: "K.E. Towle" <karljiml@compuserve.com>
- Commercial posting policy
- Re: GM book on TPI/ Gas tank venting on TPI
- From: Shannen Durphey <shannen@grolen.com>
- Re: '92 Y-body LT1 bin file needed.
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- 747 Rom Emulator
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- Re: 747 Rom Emulator
- From: Steven Ciciora <ciciora@Ciciora.com>
- Conditioned reflexes, min EFI
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Robbins Nugent chip holders for the 2732
- From: Mike Dillon <mdill@lsil.com>
- Re: Robbins Nugent chip holders for the 2732
- Re: Robbins Nugent chip holders for the 2732
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Robbins Nugent chip holders for the 2732
- From: "Craig Marcho" <not_valid_email@airmail.net>
- Re: Robbins Nugent chip holders for the 2732
- Re: Robbins Nugent chip holders for the 2732
- From: Squash <realsquash@yahoo.com>
- Re: Robbins Nugent chip holders for the 2732
- From: Squash <realsquash@yahoo.com>
- Re: Robbins Nugent chip holders for the 2732
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Robbins Nugent chip holders for the 2732
- From: Shannen Durphey <shannen@grolen.com>
- need help with '165 in Vette
- From: "NickG" <nikog@mediaone.net>
- Re: need help with '165 in Vette
- From: "Bruce Plecan" <nacelp@bright.net>
- 89 305 favorite?.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Looking for a 16149396 ECM
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: 89 305 favorite?.
- From: Len Sabatine <sabatine@epix.net>
- Re: 89 305 favorite?.
- From: Davis <davis@mail.eecis.udel.edu>
- Re: need help with '165 in Vette
- From: Davis <davis@mail.eecis.udel.edu>
- Re: 89 305 favorite? Follow up
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 89 305 favorite?.
- From: "Bruce Plecan" <nacelp@bright.net>
- Casting Numbers
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 89 305 favorite?.
- From: Davis <davis@mail.eecis.udel.edu>
- Re: 89 305 favorite?.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Chatting with a 730
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: need help with '165 in Vette
- From: "Bruce Plecan" <nacelp@bright.net>
- GM Training Manuals
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- [no subject]
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- Re: Chatting with a 730
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- Re: GM Training Manuals
- From: Shannen Durphey <shannen@grolen.com>
- Re: 1999 5.3 liter Vortec V-8-antitheft
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: TCC lower temp
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- reading flash chips... was: Re: Looking for a 16149396 ECM
- RE: '92 Y-body LT1 bin file needed.
- From: "Craig Marcho" <marcho@flash.net>
- RE: '92 Y-body LT1 bin file needed.
- From: Roger Heflin <rah@horizon.hit.net>
- RE: '92 Y-body LT1 bin file needed.
- From: "Craig Marcho" <marcho@flash.net>
- Re: Robbins Nugent chip holders for the 2732
- From: "Programmer" <nwester@eidnet.org>
- prom
- From: Rich Baxter <rcbaxter@snet.net>
- Re: prom
- From: Ludis Langens <ludis@cruzers.com>
- Re: prom
- Re: '92 Y-body LT1 bin file needed.
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: need help with '165 in Vette
- From: "NickG" <nikog@mediaone.net>
- Re: MAF BLM based tuning
- From: romans@starstream.net (Romans, Mark)
- Re: GM Training Manuals
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: reading flash chips... was: Re: Looking for a 16149396 ECM
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: reading flash chips... was: Re: Looking for a 16149396 ECM
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: reading flash chips... was: Re: Looking for a 16149396 ECM
- From: Andrew Mattei <amattei@mindspring.com>
- 16149396 ECM - Yep, how much?
- From: "TK" <terryk@foothill.net>
- Re: 16149396 ECM - Yep, how much?
- From: Scot Sealander <Sealand@clarityconnect.com>
- Injector sizing for S/C applications
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: reading flash chips... was: Re: Looking for a 16149396 ECM
- Re: Casting Numbers
- From: "John D. Bachman" <jdbachman@redrose.net>
- Re:
- From: Rodney Davis <rodldavis@home.com>
- Re: prom
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Accel DFI help maybe?
- From: "J. T. Spilman" <jtstexas@home.com>
- Re: 16149396 ECM - Yep, how much?
- From: "TK" <terryk@foothill.net>
- Re: Accel DFI help maybe?
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: Accel DFI help maybe?
- From: "C. Brooks" <cbrooks1@tqci.net>
- efi bin's cross reference
- From: Marc Piccioni <piccioni@cadvision.com>
- FW: efi bin's cross reference
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: prom
- From: Ludis Langens <ludis@cruzers.com>
- Re: efi bin's cross reference
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Accel DFI help maybe?
- From: "J. T. Spilman" <jtstexas@home.com>
- Re: efi bin's cross reference
- 89 Camaro/Firebird 5.0 5-Speed TPI BIN
- From: romans@starstream.net (Romans, Mark)
- Re: efi bin's cross reference
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Accel DFI help maybe?
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
- Re: MAF BLM based tuning
- From: "Dave Zug" <dzug@delanet.com>
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
- From: "Dave Zug" <dzug@delanet.com>
- Re: MAF BLM based tuning
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: efi bin's cross reference
- From: Shannen Durphey <shannen@grolen.com>
- Mode $0a on 7730
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
- From: Shannen Durphey <shannen@grolen.com>
- Re: LS1 Hack?
- From: "Dave & Irina Eicher" <sailors@mwci.net>
- Dizzy to Coil pack
- From: "black maj" <blackmin@hotmail.com>
- It works
- From: "Todd Burkard" <toddburkard@pcmc.com>
- RE: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: LS1 Hack?
- Re: Dizzy to Coil pack
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: LS1 Hack?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Lean Cruise.
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Lean Cruise.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
- From: romans@starstream.net (Romans, Mark)
- Re: GM Training Manuals
- From: steve ravet <sravet@arm.com>
- [no subject]
- From: Pat Ford <pford@qnx.com>
- ALDL on 747
- From: Squash <realsquash@yahoo.com>
- Re: Casting Numbers
- From: "Programmer" <nwester@eidnet.org>
- RE: ALDL on 747
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Numeric BCCs
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Numeric BCCs
- 427 ecu file?
- Re: 427 ecu file?
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: ALDL on 747
- From: Squash <realsquash@yahoo.com>
- Re: LS1 Hack?
- From: Andrew Mattei <amattei@mindspring.com>
- Re: ALDL on 747
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ALDL on 747
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Mode $0a on 7730
- From: David Cooley <n5xmt@triad.rr.com>
- Re: ALDL on 747
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Mode $0a on 7730
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Numeric BCCs
- From: "Craig Marcho" <not_valid_email@airmail.net>
- HT502-Retro-Kit BIN Needed
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Accel DFI help maybe?
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- RE: HT502-Retro-Kit BIN Needed
- From: Carl Summers <InTech@writeme.com>
- Re: MAF BLM based tuning
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Buick 3800 ECM's
- From: Speartech <speartec@iquest.net>
- Re: Mode $0a on 7730
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- Re: Mode $0a on 7730
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Buick 3800 ECM's
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Mode $0a on 7730
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Numeric BCCs
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Another Newbie Question
- From: "c y k" <ckyk@eudoramail.com>
- Re: Another Newbie Question
- Re: TPI Conversion?
- From: "Thomas Matthews" <tmatthew@stny.rr.com>
- Re: Numeric BCCs
- From: Shannen Durphey <shannen@grolen.com>
- Re: Buick 3800 ECM's
- From: "TK" <terryk@foothill.net>
- Re: Another Newbie Question
- From: Shannen Durphey <shannen@grolen.com>
- Re: MAF BLM based tuning
- From: "Dave Zug" <dzug@delanet.com>
- Re: Numeric BCCs
- From: Shannen Durphey <shannen@grolen.com>
- Re: MAF BLM based tuning
- From: "Dave Zug" <dzug@delanet.com>
- aumh bin uploaded
- From: Bob Valentine <bob@tecmark.com>
- Re: LS1 Hack?
- From: romans@starstream.net (Romans, Mark)
- Re: Another Newbie Question
- From: "Dave Zug" <dzug@delanet.com>
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
- From: romans@starstream.net (Romans, Mark)
- Re: MAF BLM based tuning
- From: romans@starstream.net (Romans, Mark)
- Re: MAF BLM based tuning
- From: romans@starstream.net (Romans, Mark)
- Saturn stuff
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
- From: "TK" <terryk@foothill.net>
- Re: aumh bin uploaded
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Another Newbie Question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Saturn stuff
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Mode $0a on 7730
- From: "Paul Blackmore" <paul_blackmore@hotmail.com>
- RE: Casting Numbers
- From: Mike Rolica <mrolica@meridian-mag.com>
- the 9th injector...
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: Saturn stuff
- RE: the 9th injector...
- From: Mike Rolica <mrolica@meridian-mag.com>
- 165 ECM idle question
- From: Rick Lindstedt <rick@mafb.org>
- RE: Saturn stuff
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re:3800 ECM's
- From: Speartech <speartec@iquest.net>
- Rev Limiter in AUJP
- From: Squash <realsquash@yahoo.com>
- Re: 165 ECM idle question
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: the 9th injector...
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: Rev Limiter in AUJP
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: the 9th injector...
- From: Squash <realsquash@yahoo.com>
- RE: the 9th injector...
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Re: Robbins Nugent chip holders for the 2732
- From: Mike Dillon <mdill@lsil.com>
- Re: Rev Limiter in AUJP
- 2.8v6 tpi and a 730
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: 2.8v6 tpi and a 730
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: 2.8v6 tpi and a 730
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: 2.8v6 tpi and a 730
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: 2.8v6 tpi and a 730
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Rev Limiter in AUJP
- From: Squash <realsquash@yahoo.com>
- RE: 2.8v6 tpi and a 730
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: 2.8v6 tpi and a 730
- From: David Cooley <n5xmt@triad.rr.com>
- Re: 2.8v6 tpi and a 730
- From: rr <RRauscher@nni.com>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Robbins Nugent chip holders for the 2732
- Re: the 9th injector...
- From: Ludis Langens <ludis@cruzers.com>
- Re: the 9th injector...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Saturn stuff
- From: Ludis Langens <ludis@cruzers.com>
- Re: 2.8v6 tpi and a 730
- From: Ludis Langens <ludis@cruzers.com>
- Re: MAF BLM based tuning
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: MAF BLM based tuning
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Saturn stuff
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- 255 MAF? (was blm based tuning)
- From: "Dave Zug" <dzug@delanet.com>
- Re: MAF BLM based tuning
- From: "Dave Zug" <dzug@delanet.com>
- Another Newbie Question, part II
- From: "hi 50" <ckyk@hotmail.com>
- Re: MAF BLM based tuning
- From: "Dave Zug" <dzug@delanet.com>
- Re: MAF BLM based tuning
- From: "Dave Zug" <dzug@delanet.com>
- Re: MAF BLM based tuning
- From: "Dave Zug" <dzug@delanet.com>
- Re: MAF BLM based tuning
- From: "Dave Zug" <dzug@delanet.com>
- Re: 255 MAF? (was blm based tuning)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Another Newbie Question, part II
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MAF BLM based tuning
- From: "Dave Zug" <dzug@delanet.com>
- Re: MAF BLM based tuning
- From: "Dave Zug" <dzug@delanet.com>
- Re: 2.8v6 tpi and a 730
- From: Shannen Durphey <shannen@grolen.com>
- Re: 255 MAF? (was blm based tuning)
- From: "Dave Zug" <dzug@delanet.com>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Another Newbie Question, part II
- From: Shannen Durphey <shannen@grolen.com>
- Re: MAF BLM based tuning
- From: Shannen Durphey <shannen@grolen.com>
- Re: Another Newbie Question, part II
- From: "Dave Zug" <dzug@delanet.com>
- Re: 255 MAF? (was blm based tuning)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Another Newbie Question, part II
- From: "Dave Zug" <dzug@delanet.com>
- Re: 255 MAF? (was blm based tuning)
- From: Shannen Durphey <shannen@grolen.com>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Another Newbie Question, part II
- From: Shannen Durphey <shannen@grolen.com>
- Re: 255 MAF? (was blm based tuning)
- From: "Dave Zug" <dzug@delanet.com>
- Re: Another Newbie Question, part II
- From: garwillis@msn.com (Garfield Willis)
- Grand Prix digital dash [non efi]
- From: Bob Valentine <bob@tecmark.com>
- Re: Casting Numbers
- From: Len Sabatine <sabatine@epix.net>
- [ADMIN] Attachments
- Re: the 9th injector...
- From: Pat Ford <pford@qnx.com>
- Re: the 9th injector...
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: 2.8v6 tpi and a 730
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: the 9th injector...
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: the 9th injector...
- From: Pat Ford <pford@qnx.com>
- RE: was MAF BLM based tuning now cab manifold to port injection
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: MAF BLM based tuning
- From: Mike Rolica <mrolica@meridian-mag.com>
- Buick ECM Trivia
- From: Ludis Langens <ludis@cruzers.com>
- RE: 2.8v6 tpi and a 730
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Buick ECM Trivia
- Re: the 9th injector...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: the 9th injector...
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: the 9th injector...
- From: "Bruce Plecan" <nacelp@bright.net>
- ADDX 1657
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: ADDX 1657
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: the 9th injector...
- From: Pat Ford <pford@qnx.com>
- Re: 2.8v6 tpi and a 730
- From: Ernst denBroeder <edenbroe@cisco.com>
- RE: the 9th injector...
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: ADDX 1657
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: the 9th injector...
- From: Pat Ford <pford@qnx.com>
- Re: ADDX 1657
- From: Pat Ford <pford@qnx.com>
- RE: the 9th injector...
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: the 9th injector...
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: the 9th injector...
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- IAC parameters
- From: Barry Tisdale <btisdale@cybersol.com>
- RE: the 9th injector...
- From: Pat Ford <pford@qnx.com>
- Re: the 9th injector...
- From: Pat Ford <pford@qnx.com>
- Re: IAC parameters
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: the 9th injector...
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: the 9th injector...
- From: Pat Ford <pford@qnx.com>
- Re: First quote in on chip carriers (Ouch)
- From: Mike Dillon <mdill@lsil.com>
- RE: the 9th injector...
- From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
- Re: IAC parameters
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: MAF BLM based tuning
- From: "Dave Zug." <dzug@delanet.com>
- Re: was MAF BLM based tuning now cab manifold to port injection
- From: "Dave Zug." <dzug@delanet.com>
- Re: First quote in on chip carriers (Ouch)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: First quote in on chip carriers (Ouch)
- From: "Craig Marcho" <not_valid_email@airmail.net>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: the 9th injector...
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: was MAF BLM based tuning now cab manifold to port injection
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: First quote in on chip carriers (Ouch)
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: First quote in on chip carriers (Ouch)
- From: Ludis Langens <ludis@cruzers.com>
- Re: Buick ECM Trivia
- From: Ludis Langens <ludis@cruzers.com>
- C3 with 8192 ALDL
- From: Ludis Langens <ludis@cruzers.com>
- Re: Buick ECM Trivia
- Re: Engine swap computer & wiring question (& 3800SC)
- From: "Tim De Coster" <craz1@softhome.net>
- Re: C3 with 8192 ALDL
- From: Pat Ford <pford@qnx.com>
- Re: Engine swap computer & wiring question
- From: "Tim De Coster" <craz1@softhome.net>
- Re: Engine swap computer & wiring question
- From: "Tim De Coster" <craz1@softhome.net>
- Re: Engine swap computer & wiring question
- From: "Tim De Coster" <craz1@softhome.net>
- Re: Engine swap computer & wiring question (& 3800SC)
- From: David Cooley <n5xmt@triad.rr.com>
- Re: MAF BLM based tuning
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: 1999 5.3 liter Vortec V-8-antitheft
- From: "Tim De Coster" <craz1@softhome.net>
- Re: 2.8v6 tpi and a 730
- From: "Tim De Coster" <craz1@softhome.net>
- Re: 2.8v6 tpi and a 730
- From: "Tim De Coster" <craz1@softhome.net>
- Quick ECM ID
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Grand Prix digital dash [non efi]
- From: "Tim De Coster" <craz1@softhome.net>
- Re: Another Newbie Question, part II
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- RE: 2.8v6 tpi and a 730
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: First quote in on chip carriers (Ouch)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: was MAF BLM based tuning now cab manifold to port injection
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: MAF BLM based tuning
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: MAF BLM based tuning
- From: Ludis Langens <ludis@cruzers.com>
- Re: MAF BLM based tuning
- From: Ludis Langens <ludis@cruzers.com>
- EPROM manufacturer and device IDs
- From: Ludis Langens <ludis@cruzers.com>
- Re: 2.8v6 tpi and a 730
- Re: Buick ECM Trivia
- From: Ludis Langens <ludis@cruzers.com>
- RE: First quote in on chip carriers (Ouch)
- From: Squash <realsquash@yahoo.com>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Another Newbie Question, part II
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MAF BLM based tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM manufacturer and device IDs
- Re: First quote in on chip carriers (Ouch)
- Re: First quote in on chip carriers (Ouch)
- Re: Buick ECM Trivia
- The Factory harness...is good!
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: MAF BLM based tuning
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Another Newbie Question, part III
- From: "hi 50" <ckyk@hotmail.com>
- Re: Another Newbie Question, part III
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Another Newbie Question, part II
- Re: Another Newbie Question, part II
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Another Newbie Question, part III
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: Another Newbie Question, part III
- From: Squash <realsquash@yahoo.com>
- Re: Engine swap computer & wiring question
- From: Shannen Durphey <shannen@grolen.com>
- Re: C3 with 8192 ALDL
- From: Shannen Durphey <shannen@grolen.com>
- Re: Mike V-> turbocharged z24 (was Re: 2.8v6 tpi and a 730)
- From: Shannen Durphey <shannen@grolen.com>
- Re: 1999 5.3 liter Vortec V-8-antitheft
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: Another Newbie Question, part III
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: Another Newbie Question, part II
- From: "TK" <terryk@foothill.net>
- A post from the newbie brigade - I'm getting closer (1 of many)
- Re: C3 with 8192 ALDL
- From: Ludis Langens <ludis@cruzers.com>
- Re: A post from the newbie brigade - I'm getting closer (1 of many)
- From: David Cooley <n5xmt@triad.rr.com>
- Re: EPROM manufacturer and device IDs
- From: Ludis Langens <ludis@cruzers.com>
- Re: C3 with 8192 ALDL
- From: Shannen Durphey <shannen@grolen.com>
- Re: A post from the newbie brigade - I'm getting closer (1 of many)
- From: Shannen Durphey <shannen@grolen.com>
- Re: Another Newbie Question, part II
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: was MAF BLM based tuning now cab manifold to port injection
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: EPROM manufacturer and device IDs
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Another Newbie Question, part II
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: A post from the newbie brigade - I'm getting closer (1 of man y)
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Mike V-> turbocharged z24 (was Re: 2.8v6 tpi and a 730)
- RE: Another Newbie Question, part II
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: Mike V-> turbocharged z24 (was Re: 2.8v6 tpi and a 730)
- Re: Another Newbie Question, part II
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Another Newbie Question, part III
- From: Squash <realsquash@yahoo.com>
- Re: Mike V-> turbocharged z24 (was Re: 2.8v6 tpi and a 730)
- TPI '165 pulling timing after Cold start
- From: Gabe <gellett@earthlink.net>
- ECU Bin Bytes 0x8000-0x8008
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- RE: EPROM manufacturer and device IDs
- Re: Mike V-> turbocharged z24 (was Re: 2.8v6 tpi a
- Re: ECU Bin Bytes 0x8000-0x8008
- From: Marc Randolph <mrand@pobox.com>
- 95 S-blazer base timeing
- From: Matt S Bower <m.s.bower@cummins.com>
- RE: EPROM manufacturer and device IDs
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: TPI '165 pulling timing after Cold start
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TPI '165 pulling timing after Cold start
- From: Gabe <gellett@earthlink.net>
- RE: TPI '165 pulling timing after Cold start
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: A post from the newbie brigade - I'm getting closer (1 of many)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TPI '165 pulling timing after Cold start
- From: Gabe <gellett@earthlink.net>
- Re: TPI '165 pulling timing after Cold start
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 95 S-blazer base timeing
- From: David Cooley <n5xmt@triad.rr.com>
- Re: TPI '165 pulling timing after Cold start
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TPI '165 pulling timing after Cold start
- From: Gabe <gellett@earthlink.net>
- Re: TPI '165 pulling timing after Cold start
- From: "Craig Marcho" <not_valid_email@airmail.net>
- Re: ECU Bin Bytes 0x8000-0x8008
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: TPI '165 pulling timing after Cold start
- From: Gabe <gellett@earthlink.net>
- Re: Chip carrier buy for less than the price of a new car.
- From: Mike Dillon <mdill@lsil.com>
- Got VSS . . .
- From: Scott Lundahl <scott@lumenetics.com>
- Re: 95 S-blazer base timeing
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: TPI '165 pulling timing after Cold start
- From: Ludis Langens <ludis@cruzers.com>
- Re: ECU Bin Bytes 0x8000-0x8008
- From: Ludis Langens <ludis@cruzers.com>
- Re: TPI '165 pulling timing after Cold start
- From: Ludis Langens <ludis@cruzers.com>
- Re: TPI '165 pulling timing after Cold start
- From: "Bruce Plecan" <nacelp@bright.net>
- After Market Harness
- Re: EPROM manufacturer and device IDs
- Was Chip carrier now sockets
- From: Marc Piccioni <piccioni@cadvision.com>
- Hi
- From: "black maj" <blackmin@hotmail.com>
- Re: Hi
- From: "black maj" <blackmin@hotmail.com>
- Re: Got VSS . . .
- From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
- Re: IAC parameters
- From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
- Re: 95 S-blazer base timeing
- Re: EPROM manufacturer and device IDs
- Re: IAC parameters
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TPI '165 pulling timing after Cold start
- From: Gabe <gellett@earthlink.net>
- Re: Got VSS . . .
- From: "TK" <terryk@foothill.net>
- Re: Got VSS . . .
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Was Chip carrier now sockets
- From: Ludis Langens <ludis@cruzers.com>
- Re: EPROM manufacturer and device IDs
- From: Ludis Langens <ludis@cruzers.com>
- Re: TPI '165 pulling timing after Cold start
- From: "John D. Bachman" <jdbachman@redrose.net>
- Re: TPI '165 pulling timing after Cold start
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM manufacturer and device IDs
- From: Matt S Bower <m.s.bower@cummins.com>
- RE: TPI '165 pulling timing after Cold start
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: ECU Bin Bytes 0x8000-0x8008
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- RE: ECU Bin Bytes 0x8000-0x8008
- From: "Malcolm Robb, LC 0112G" <Webmaster@lotus-carlton.fsnet.co.uk>
- Re: Got VSS . . .
- Re: ECU Bin Bytes 0x8000-0x8008
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: TPI '165 pulling timing after Cold start
- From: Gabe <gellett@earthlink.net>
- Need info/help on gm ecm conversion
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: TPI '165 pulling timing after Cold start
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Need info/help on gm ecm conversion
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Need info/help on gm ecm conversion
- From: Carl Summers <InTech@writeme.com>
- Re: TPI '165 pulling timing after Cold start
- From: Ludis Langens <ludis@cruzers.com>
- Re: TPI '165 pulling timing after Cold start
- From: romans@starstream.net (Romans, Mark)
- Re: Need info/help on gm ecm conversion
- From: Shannen Durphey <shannen@grolen.com>
- Re: Need info/help on gm ecm conversion
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TPI '165 pulling timing after Cold start
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Need info/help on gm ecm conversion
- From: "Programmer" <nwester@eidnet.org>
- Calcing diff ratios ?
- From: "Programmer" <nwester@eidnet.org>
- Re: Need info/help on gm ecm conversion
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TPI '165 pulling timing after Cold start
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: TPI '165 pulling timing after Cold start
- From: Squash <realsquash@yahoo.com>
- Re: Need info/help on gm ecm conversion
- From: Shannen Durphey <shannen@grolen.com>
- Re: TPI '165 pulling timing after Cold start
- From: "Bruce Plecan" <nacelp@bright.net>
- FreeScan 2.0.0
- From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
- Re: TPI '165 pulling timing after Cold start
- From: romans@starstream.net (Romans, Mark)
- Re: TPI '165 pulling timing after Cold start
- From: Gabe <gellett@earthlink.net>
- Re: EPROM manufacturer and device IDs
- From: "Jeff M" <tystorm@email.msn.com>
- Injector R+R
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Injector R+R
- From: garwillis@msn.com (Garfield Willis)
- Re: Injector R+R
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: Injector R+R
- Re: Injector R+R
- Re: Injector R+R
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Injector R+R
- From: "Bruce Plecan" <nacelp@bright.net>
- spare ecm's '7730 & '7748
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: Injector R+R
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: spare ecm's '7730 & '7748
- From: rr <RRauscher@nni.com>
- Re: Injector R+R
- From: rr <RRauscher@nni.com>
- Re: spare ecm's '7730 & '7748
- From: rr <RRauscher@nni.com>
- Re: Injector R+R
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: Injector R+R
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Injector R+R
- From: bearbvd@cmn.net (Greg Hermann)
- Re: Injector R+R
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Injector R+R
- From: garwillis@msn.com (Garfield Willis)
- Re: Injector R+R
- From: Shannen Durphey <shannen@grolen.com>
- Re: Injector R+R
- From: "Bruce Plecan" <nacelp@bright.net>
- What the max rpms anyones used a gmecm on?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Injector R+R
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: What the max rpms anyones used a gmecm on?
- From: Roger Heflin <rah@horizon.hit.net>
- Re: spare ecm's '7730 & '7748
- From: "Bruce Plecan" <nacelp@bright.net>
- Injector Duty cycle calculations
- From: timsiford@hushmail.com
- Re: Injector Duty cycle calculations
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Injector Duty cycle calculations
- From: timsiford@hushmail.com
- Re: Injector Duty cycle calculations
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Injector Duty cycle calculations
- From: romans@starstream.net (Romans, Mark)
- Re: Injector Duty cycle calculations
- From: timsiford@hushmail.com
- Re: Injector Duty cycle calculations
- From: timsiford@hushmail.com
- Re: Injector Duty cycle calculations
- From: Scott Knight <scott@scottknight.com>
- ATTN Scott: Re: Injector Duty cycle calculations
- From: timsiford@hushmail.com
- RE: Injector Duty cycle calculations
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: Injector Duty cycle calculations
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Injector Duty cycle calculations
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Injector Duty cycle calculations
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Injector Duty cycle calculations
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: ATTN Scott: Re: Injector Duty cycle calculations
- From: Scott Knight <scott@scottknight.com>
- Re: Injector Duty cycle calculations
- From: Roger Heflin <rah@horizon.hit.net>
- Injector PWs - was duty cycle
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Injector Duty cycle calculations
- From: timsiford@hushmail.com
- Re: ATTN Scott: Re: Injector Duty cycle calculations
- From: timsiford@hushmail.com
- Re: Injector Duty cycle calculations
- From: timsiford@hushmail.com
- Re: Injector Duty cycle calculations
- From: timsiford@hushmail.com
- Re: Injector PWs - was duty cycle
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Injector Duty cycle calculations
- From: Roger Heflin <rah@horizon.hit.net>
- Considering Injector Change..
- From: "Rodney Fulk" <elixir@pathwaynet.com>
- Re: Injector Duty cycle calculations
- Re: Considering Injector Change..
- From: timsiford@hushmail.com
- RE: Considering Injector Change..
- From: "the Fredericks" <fredericksk@worldnet.att.net>
- Re: Considering Injector Change..
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Considering Injector Change..
- From: "Rodney Fulk" <elixir@pathwaynet.com>
- RE: Considering Injector Change..
- From: "Rodney Fulk" <elixir@pathwaynet.com>
- Re: Considering Injector Change..
- From: Len Sabatine <sabatine@epix.net>
- Re: Considering Injector Change..
- big inch SBC EFI intake mainfold
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: big inch SBC EFI intake mainfold
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: big inch SBC EFI intake mainfold
- Re: big inch SBC EFI intake mainfold
- From: "gene l. clifford" <genelc@idworld.net>
- Re: big inch SBC EFI intake mainfold
- From: garwillis@msn.com (Garfield Willis)
- RE: big inch SBC EFI intake mainfold
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: big inch SBC EFI intake mainfold
- Re: Injector Duty cycle calculations
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: big inch SBC EFI intake mainfold
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Considering Injector Change..
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Injector Duty cycle calculations
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: big inch SBC EFI intake mainfold
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Injector Duty cycle calculations
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: big inch SBC EFI intake mainfold
- From: Mike Rolica <mrolica@meridian-mag.com>
- FS: TIF 1500 Printer/scanner
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: Injector Duty cycle calculations
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Injector Duty cycle calculations
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Injector Duty cycle calculations
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Injector Duty cycle calculations
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: the 9th injector...
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: Injector Duty cycle calculations
- From: "Bruce Plecan" <nacelp@bright.net>
- Kwarm Kickdown Enabled??
- From: Gabe <gellett@earthlink.net>
- RE: Injector Duty cycle calculations
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: big inch SBC
- Re: Injector Duty cycle calculations
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Kwarm Kickdown Enabled??
- From: garwillis@msn.com (Garfield Willis)
- 2-Bar 730/AUJP
- From: Squash <realsquash@yahoo.com>
- RE: Injector Duty cycle calculations
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Kwarm Kickdown Enabled??
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: 2-Bar 730/AUJP
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: 2-Bar 730/AUJP
- From: Gabe <gellett@earthlink.net>
- RE: Considering Injector Change..
- From: "the Fredericks" <fredericksk@worldnet.att.net>
- Re: sbc in place of lt1
- From: Hotrodderzzz@aol.com
- Re: 2-Bar 730/AUJP
- From: Squash <realsquash@yahoo.com>
- Re: Kwarm Kickdown Enabled??
- From: garwillis@msn.com (Garfield Willis)
- Re: sbc in place of lt1
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Injector Duty cycle calculations
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: sbc in place of lt1
- Re: sbc in place of lt1
- From: Len Sabatine <sabatine@epix.net>
- Re: Injector Duty cycle calculations
- From: "Jeff M" <tystorm@email.msn.com>
- 2 Questions
- From: "Rodney Fulk" <elixir@pathwaynet.com>
- Re: 2 Questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: sbc in place of lt1
- From: romans@starstream.net (Romans, Mark)
- 1228707 ECM
- From: Bob Valentine <bob@tecmark.com>
- Re: 2 Questions
- From: John_Calabrese@ENGELHARD.COM
- Re: Considering Injector Change..
- Re: 2 Questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 2 Questions
- From: Len Sabatine <sabatine@epix.net>
- Re: sbc in place of lt1
- From: Len Sabatine <sabatine@epix.net>
- Re: 2 Questions
- From: Len Sabatine <sabatine@epix.net>
- Re: more details sbc in place of lt1
- From: Hotrodderzzz@aol.com
- Re: more details sbc in place of lt1
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: more details sbc in place of lt1
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: more details sbc in place of lt1
- From: Len Sabatine <sabatine@epix.net>
- Re: more details sbc in place of lt1
- From: Scott & Jennifer Peitzsch <jlg-sep@mediaone.net>
- RE: sbc in place of lt1
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- ARCHIVES
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: more details sbc in place of lt1
- From: garwillis@msn.com (Garfield Willis)
- Re: ARCHIVES
- From: garwillis@msn.com (Garfield Willis)
- Re: more details sbc in place of lt1
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: more details sbc in place of lt1
- From: Andrew Mattei <amattei@mindspring.com>
- Re: Was Chip carrier now sockets
- From: steve ravet <sravet@arm.com>
- Re: more details sbc in place of lt1
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Injector R+R
- From: steve ravet <sravet@arm.com>
- Re: more details sbc in place of lt1
- From: Len Sabatine <sabatine@epix.net>
- Distrib needed
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: more details sbc in place of lt1
- From: garwillis@msn.com (Garfield Willis)
- Re: Len Sabatine optispark to sbc
- From: Hotrodderzzz@aol.com
- Re: more details sbc in place of lt1
- From: garwillis@msn.com (Garfield Willis)
- Re: more details sbc in place of lt1
- Re: more details sbc in place of lt1
- From: Roger Heflin <rah@horizon.hit.net>
- Re: more details sbc in place of lt1
- From: garwillis@msn.com (Garfield Willis)
- Re: more details sbc in place of lt1
- From: Len Sabatine <sabatine@epix.net>
- Re: more details sbc in place of lt1
- From: Len Sabatine <sabatine@epix.net>
- Re: Len Sabatine optispark to sbc
- From: Len Sabatine <sabatine@epix.net>
- RE: Considering Injector Change..
- From: "the Fredericks" <fredericksk@worldnet.att.net>
- turbo wastegate solenoid and MAP sensor
- From: "NickG" <nikog@mediaone.net>
- EEPROM Code gurus
- From: "John T. Martin" <gm.man@gte.net>
- Re: turbo wastegate solenoid and MAP sensor
- From: "Green" <green@nlenx.com>
- Re: more details sbc in place of lt1
- From: Shannen Durphey <shannen@grolen.com>
- Re: more details sbc in place of lt1
- From: Shannen Durphey <shannen@grolen.com>
- Re: Opti musings... (was Re: more details sbc in place of lt1)
- From: Shannen Durphey <shannen@grolen.com>
- Re: Was Chip carrier now sockets
- From: "Edward J. Malkiewicz" <krazyed@worldnet.att.net>
- Re: Considering Injector Change..
- Re: EEPROM Code gurus
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: more details sbc in place of lt1
- From: Len Sabatine <sabatine@epix.net>
- Re: Injector R+R
- From: Bob Valentine <bob@tecmark.com>
- Re: more details sbc in place of lt1
- From: Shannen Durphey <shannen@grolen.com>
- Re: Injector R+R
- From: Kevin Crain <warpten@warpten.com>
- RE: Distrib needed
- From: Don.F.Broadus@ucm.com
- Re: turbo wastegate solenoid and MAP sensor
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- 305 TPI bins
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: more details sbc in place of lt1
- From: Len Sabatine <sabatine@epix.net>
- Re: 305 TPI bins
- Re: turbo wastegate solenoid and MAP sensor
- From: "Tim De Coster" <craz1@softhome.net>
- Re: 305 TPI bins
- From: Gabe <gellett@earthlink.net>
- RE: 305 TPI bins
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: 305 TPI bins
- From: Len Sabatine <sabatine@epix.net>
- 747 Rom Emulator / status
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- Re: 747 Rom Emulator / status
- From: steve ravet <sravet@arm.com>
- Re: 2-Bar 730/AUJP
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: 747 Rom Emulator / status
- From: "Programmer" <nwester@eidnet.org>
- Re: 2-Bar 730/AUJP
- From: Squash <realsquash@yahoo.com>
- Re: 2-Bar 730/AUJP
- Up-n-running...
- From: Shannen Durphey <shannen@grolen.com>
- RE: 747 Rom Emulator / design
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- RE: 747 checksum
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- Re: Up-n-running...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 747 Rom Emulator / design
- From: steve ravet <sravet@arm.com>
- Re: Up-n-running...
- From: John_Calabrese@ENGELHARD.COM
- Re: Up-n-running...
- Re: 747 Rom Emulator / design
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: Up-n-running...
- From: Len Sabatine <sabatine@epix.net>
- Re: 747 Rom Emulator / design
- From: Len Sabatine <sabatine@epix.net>
- RE: 747 Rom Emulator / design
- From: Eric Aos <EOA@spartek.com>
- RE: 747 Rom Emulator / design
- From: Steven Ciciora <ciciora@Ciciora.com>
- RE: 747 Rom Emulator / design
- From: Squash <realsquash@yahoo.com>
- Re: 747 Rom Emulator / design
- RE: 747 Rom Emulator / design
- From: Pat Ford <pford@qnx.com>
- RE: 747 Rom Emulator / design
- From: Eric Aos <EOA@spartek.com>
- Nitrous Explosion
- From: "Andy Whittaker - Chester UK" <arwefi@netcomuk.co.uk>
- Re: Nitrous Explosion
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: Nitrous Explosion
- From: Rick Lindstedt <rick@mafb.org>
- Re: Nitrous Explosion
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Nitrous Explosion
- From: "Chris Bennight" <Christopher_Bennight@baylor.edu>
- Re: Nitrous Explosion
- From: Rick Lindstedt <rick@mafb.org>
- RE: Nitrous Explosion
- From: "Michael Adams" <michaeladams1@compuserve.com>
- Re: Nitrous Explosion
- From: bearbvd@cmn.net (Greg Hermann)
- Re: 747 Rom Emulator / design
- From: rr <RRauscher@nni.com>
- Re: Nitrous Explosion
- From: rr <RRauscher@nni.com>
- Re: 747 Rom Emulator / design
- From: rr <RRauscher@nni.com>
- RE: Nitrous Explosion
- From: Len Sabatine <sabatine@epix.net>
- Re: 747 Rom Emulator / design
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: 747 Rom Emulator / status
- From: Bill Shaw <bshaw@connix.com>
- Re: Up-n-running...
- From: Shannen Durphey <shannen@grolen.com>
- Re: Up-n-running...
- From: Shannen Durphey <shannen@grolen.com>
- Re: Up-n-running...
- From: Shannen Durphey <shannen@grolen.com>
- Re: 747 checksum
- From: "Programmer" <nwester@eidnet.org>
- Re: 747 Rom Emulator / design
- From: steve ravet <sravet@arm.com>
- 730 to Nissan
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 747 Rom Emulator / design
- From: rr <RRauscher@nni.com>
- Re: 747 Rom Emulator / design
- From: rr <RRauscher@nni.com>
- Re: 747 checksum
- From: rr <RRauscher@nni.com>
- Re: Up-n-running...vortec heads
- Hello and help please
- From: "David Posea" <dposea@mindspring.com>
- Re: more details sbc in place of lt1
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Diferent emulator projects
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- Re: 747 Rom Emulator / status
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Nitrous Explosion
- From: Pat Ford <pford@qnx.com>
- Re: Hello and help please
- From: Len Sabatine <sabatine@epix.net>
- Re: Hello and help please
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Nitrous Explosion
- From: Don.F.Broadus@ucm.com
- Re: 747 checksum
- From: "Programmer" <nwester@eidnet.org>
- RE: Hello and help please
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Hello and help please
- From: "David Posea" <dposea@mindspring.com>
- Re: 747 Rom Emulator / design
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: Nitrous Explosion
- From: "Jeff Flanary" <jefff@mounet.com>
- Re: 747 Rom Emulator / design
- RE: Nitrous Explosion
- From: Don.F.Broadus@ucm.com
- Re: Nitrous Explosion
- From: bearbvd@cmn.net (Greg Hermann)
- RE: Nitrous Explosion
- From: Mike Rolica <mrolica@meridian-mag.com>
- BCC for Chips
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: Nitrous Explosion
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Nitrous Explosion
- From: garwillis@msn.com (Garfield Willis)
- Re: BCC for Chips
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Nitrous Explosion
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- RE: Nitrous Explosion
- From: Len Sabatine <sabatine@epix.net>
- Re: Hello and help please
- From: Len Sabatine <sabatine@epix.net>
- Re: Nitrous Explosion
- From: Len Sabatine <sabatine@epix.net>
- Writting to memcals
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Hello and help please
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: Hello and help please
- From: "David Posea" <dposea@mindspring.com>
- Re: Hello and help please
- From: "David Posea" <dposea@mindspring.com>
- RE: Writting to memcals
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Writting to memcals
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Writting to memcals
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Nitrous Explosion
- From: "Jeff Flanary" <jefff@mounet.com>
- RE: Nitrous Explosion
- From: Don.F.Broadus@ucm.com
- Re: Hello and help please
- From: Len Sabatine <sabatine@epix.net>
- Memcal needed
- ECM Identification
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: ECM Identification
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM Identification
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: ECM Identification
- From: Shannen Durphey <shannen@grolen.com>
- Re: ECM Identification
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Memcal needed
- From: Shannen Durphey <shannen@grolen.com>
- Re: ECM Identification
- From: "TK" <terryk@foothill.net>
- Re: 747 Rom Emulator / design
- From: Shannen Durphey <shannen@grolen.com>
- Re: Memcal needed
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Memcal needed
- Re: Memcal needed
- Re: Memcal needed
- From: "David Posea" <dposea@mindspring.com>
- hotter plugs on hopped rebuild
- From: "lpwcruzr" <lpwcruzr@netzero.net>
- Re: hotter plugs on hopped rebuild
- From: "gene l. clifford" <genelc@idworld.net>
- Re: Nitrous Explosion
- From: garwillis@msn.com (Garfield Willis)
- Bon Voyage, maties
- From: garwillis@msn.com (Garfield Willis)
- Re: hotter plugs on hopped rebuild
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Memcal needed
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Memcal needed
- From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
- ecm upgrade
- From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
- Re: hotter plugs on hopped rebuild
- From: "gene l. clifford" <genelc@idworld.net>
- Re: hotter plugs on hopped rebuild
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: hotter plugs on hopped rebuild
- From: "Programmer" <nwester@eidnet.org>
- Re: hotter plugs on hopped rebuild
- From: Len Sabatine <sabatine@epix.net>
- Re: Memcal needed
- From: Len Sabatine <sabatine@epix.net>
- Re: Writting to memcals
- Re: Writting to memcals
- Re: ECM Identification
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- TPI/SFI article
- From: "Thomas Matthews" <tmatthew@stny.rr.com>
- Re: TPI/SFI article
- From: Kevin Crain <kevin@warpten.com>
- Re: hotter plugs on hopped rebuild
- From: Shannen Durphey <shannen@grolen.com>
- Re: TPI/SFI article
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: TPI/SFI article
- From: garwillis@msn.com (Garfield Willis)
- Re: hotter plugs on hopped rebuild
- From: "alexpeper" <alexpeper@email.msn.com>
- Can a GM ECM be tuned
- From: "David Posea" <dposea@mindspring.com>
- Up-n-running, pt 2
- From: Shannen Durphey <shannen@grolen.com>
- Re: Up-n-running, pt 2
- From: "Thomas Matthews" <tmatthew@stny.rr.com>
- Re: hotter plugs on hopped rebuild
- Re: hotter plugs on hopped rebuild
- Re: alternate plugs for al heads
- Re: Injector R+R
- From: Shannen Durphey <shannen@grolen.com>
- Re: Up-n-running, pt 2
- From: Shannen Durphey <shannen@grolen.com>
- Re: Can a GM ECM be tuned
- From: David Cooley <n5xmt@triad.rr.com>
- Engine light on getting code 12
- From: Keith <kgil1@tampabay.rr.com>
- TBI Fuel Pressure
- From: Brent Obermiller <ober_b@sssnet.com>
- RE: Engine light on getting code 12
- From: "Jim Sloan" <leroy@sunflower.com>
- Re: Can a GM ECM be tuned
- From: "David Posea" <dposea@mindspring.com>
- Re: Engine light on getting code 12
- From: Shannen Durphey <shannen@grolen.com>
- Re: Can a GM ECM be tuned
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: TBI Fuel Pressure
- From: Shannen Durphey <shannen@grolen.com>
- Re: Engine light on getting code 12
- From: Keith <kgil1@tampabay.rr.com>
- Re: Engine light on getting code 12
- From: Keith <kgil1@tampabay.rr.com>
- Re: Can a GM ECM be tuned
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: Can a GM ECM be tuned
- From: "David Posea" <dposea@mindspring.com>
- Re: Can a GM ECM be tuned
- From: "David Posea" <dposea@mindspring.com>
- Re: Can a GM ECM be tuned
- Re: Can a GM ECM be tuned
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: Can a GM ECM be tuned
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Engine light on getting code 12
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Engine light on getting code 12
- From: Keith <kgil1@tampabay.rr.com>
- EPROM SIMULATOR
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Writting to memcals
- From: rr <RRauscher@nni.com>
- Re: Can a GM ECM be tuned
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: Can a GM ECM be tuned
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: Can a GM ECM be tuned
- From: "Dave & Irina Eicher" <sailors@mwci.net>
- RE: Nitrous Explosion
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: hotter plugs on hopped rebuild
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Writting to memcals
- From: David Cooley <n5xmt@triad.rr.com>
- RE: Engine light on getting code 12
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Can a GM ECM be tuned
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: Nitrous Explosion
- From: garwillis@msn.com (Garfield Willis)
- 1971/350 C10 EFI question
- From: Paul Beam <pbeam@elkproducts.com>
- Re: 1971/350 C10 EFI question
- Re: 1971/350 C10 EFI question
- From: steve ravet <sravet@arm.com>
- Odp: Can a GM ECM be tuned
- From: "Marek" <elemark@priv4.onet.pl>
- Re: TBI Fuel Pressure
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Engine light on getting code 12
- From: Shannen Durphey <shannen@grolen.com>
- Re: 1971/350 C10 EFI question
- From: Shannen Durphey <shannen@grolen.com>
- Re: 1971/350 C10 EFI question
- From: Shannen Durphey <shannen@grolen.com>
- Re: 1971/350 C10 EFI question
- From: "Bruce Plecan" <nacelp@bright.net>
- re-calibration software
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: re-calibration software
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: re-calibration software
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Bendix efi
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: Bendix efi
- Re: big inch SBC EFI intake mainfold
- From: Tom Sharpe <twsharpe@mtco.com>
- Male 12 PIN ALDL
- From: "black maj" <blackmin@hotmail.com>
- RE: big inch SBC EFI intake mainfold
- From: "the Fredericks" <fredericksk@worldnet.att.net>
- Re: Male 12 PIN ALDL
- From: Peter Gargano <peter@techedge.com.au>
- Re: Male 12 PIN ALDL
- From: "black maj" <blackmin@hotmail.com>
- Re: big inch SBC EFI intake mainfold
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: big inch SBC EFI intake mainfold
- From: "Bruce Plecan" <nacelp@bright.net>
- Ecu Identification needed.
- From: Richard Wakeling <kojab@ar.com.au>
- Re: Ecu Identification needed.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ecu Identification needed.
- From: steve ravet <sravet@arm.com>
- 2732 and 2732A programming Q's
- From: "Craig Marcho" <not_valid_email@airmail.net>
- Re: more details sbc in place of lt1
- From: Scott Knight <scott@scottknight.com>
- Re: 2732 and 2732A programming Q's
- From: David Cooley <n5xmt@triad.rr.com>
- Re: more details sbc in place of lt1
- From: Len Sabatine <sabatine@epix.net>
- Re: more details sbc in place of lt1
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 2732 and 2732A programming Q's
- From: Len Sabatine <sabatine@epix.net>
- GM calibration stuff
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: GM calibration stuff
- From: John_Calabrese@ENGELHARD.COM
- GM 8-Pin Module
- Re: more details sbc in place of lt1
- From: Scott Knight <scott@scottknight.com>
- Re: more details sbc in place of lt1
- From: Scott Knight <scott@scottknight.com>
- Re: GM 8-Pin Module
- From: steve ravet <sravet@arm.com>
- Bin Library
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: GM calibration stuff
- From: "Gregg Gruen" <gruegre@hotmail.com>
- Re: Bin Library
- From: "Programmer" <nwester@eidnet.org>
- methanol/ethanol/gas 730/727 bins
- From: mswayze@truswood.com (Mike Swayze)
- EPROM Programming
- Re: Bin Library
- From: rweatherford@mindspring.com
- RE: EPROM Programming
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: EPROM Programming
- From: "David Posea" <dposea@mindspring.com>
- Re: EPROM Programming
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM Programming
- From: "David Posea" <dposea@mindspring.com>
- Re: EPROM Programming
- From: rr <RRauscher@nni.com>
- Re: EPROM Programming
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM Programming
- From: "David Posea" <dposea@mindspring.com>
- Re: EPROM Programming
- From: Shannen Durphey <shannen@grolen.com>
- Re: EPROM Programming
- From: "David Posea" <dposea@mindspring.com>
- Re: GM calibration stuff
- From: romans@starstream.net (Romans, Mark)
- Re: EPROM Programming
- Re: EPROM Programming
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM Programming
- Re: Was Chip carrier now sockets
- From: Ludis Langens <ludis@cruzers.com>
- Re: ECM Identification
- From: Ludis Langens <ludis@cruzers.com>
- Re: ecm upgrade
- From: Ludis Langens <ludis@cruzers.com>
- Re: 747 Rom Emulator / design
- From: Ludis Langens <ludis@cruzers.com>
- Re: EPROM Programming
- From: romans@starstream.net (Romans, Mark)
- Re: EPROM Programming
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM Programming
- Re: EPROM Programming
- From: romans@starstream.net (Romans, Mark)
- Re: 747 Rom Emulator / design
- Re: EPROM Programming
- Fuel Hoses, Found
- From: Bob Valentine <bob@tecmark.com>
- Re: Fuel Hoses, Found
- Off.. questions too basic?
- From: Shannen Durphey <shannen@grolen.com>
- Re: EPROM Programming
- From: Shannen Durphey <shannen@grolen.com>
- Re: Fuel Hoses, Found
- From: Shannen Durphey <shannen@grolen.com>
- Re: ECM Identification
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- RE: EPROM Programming
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: EPROM Programming
- From: Mike Rolica <mrolica@meridian-mag.com>
- archives slim efi content
- From: mswayze@truswood.com (Mike Swayze)
- EPROM in place of BPROM
- From: Andrew Mattei <amattei@mindspring.com>
- Re: FPGA pricing
- From: Marc Randolph <mrand@pobox.com>
- Re: FPGA pricing
- From: Len Sabatine <sabatine@epix.net>
- BFTP on 16191947, and 7730 for auction
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: EPROM Programming
- From: romans@starstream.net (Romans, Mark)
- Re: EPROM Programming
- From: Len Sabatine <sabatine@epix.net>
- Re: EPROM Programming
- From: Len Sabatine <sabatine@epix.net>
- Re: archives slim efi content
- From: steve ravet <sravet@arm.com>
- Re: GM calibration stuff (college comp.)
- From: "Gregg Gruen" <gruegre@hotmail.com>
- Re: EPROM Programming
- From: "David Posea" <dposea@mindspring.com>
- Re: EPROM Programming
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM Programming
- Re: EPROM Programming
- Re: EPROM Programming
- From: Shannen Durphey <shannen@grolen.com>
- ADLD Data Stream Info Required
- From: Peter Gargano <peter@techedge.com.au>
- Re: ADLD Data Stream Info Required
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ADLD Data Stream Info Required
- From: Peter Gargano <peter@techedge.com.au>
- Re: EPROM Programming
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Fuel Hoses, Found
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: Fuel Hoses, Found
- From: "Bruce Plecan" <nacelp@bright.net>
- Kit Car Mag SFI
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: Fuel Hoses, Found
- From: Shannen Durphey <shannen@grolen.com>
- RE: EPROM Programming
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: EPROM Programming
- Re: EPROM Programming
- From: "David Posea" <dposea@mindspring.com>
- Re: EPROM Programming
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM Programming
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM Programming
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Fuel Hoses, Found
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: EPROM Programming
- From: romans@starstream.net (Romans, Mark)
- Re: EPROM Programming
- From: Shannen Durphey <shannen@grolen.com>
- Re: EPROM Programming
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM Programming
- From: Len Sabatine <sabatine@epix.net>
- Re: Fuel Hoses, Found
- From: "Jim Yeagley" <jyeag@core.com>
- Re: EPROM Programming
- From: Len Sabatine <sabatine@epix.net>
- Re: EPROM Programming
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: ADLD Data Stream Info Required
- From: Peter Gargano <peter@techedge.com.au>
- Re: Fuel Hoses, Found
- From: rr <RRauscher@nni.com>
- Re: EPROM Programming
- From: "Programmer" <nwester@eidnet.org>
- Re: EPROM Programming
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: EPROM Programming
- From: rr <RRauscher@nni.com>
- BCC help
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM Programming
- From: "David Posea" <dposea@mindspring.com>
- Re: EPROM Programming
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: BLM cell boundaries, Was: EPROM Programming
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: ADLD Data Stream Info Required
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: Fuel Hoses, Found
- From: steve ravet <sravet@arm.com>
- Re: BCC help
- From: steve ravet <sravet@arm.com>
- Re: BCC help
- Re: BCC help
- From: Shannen Durphey <shannen@grolen.com>
- 90 or 91 Corvette wiring diagram
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: 90 or 91 Corvette wiring diagram
- From: Shannen Durphey <shannen@grolen.com>
- 747 crossfire conversion question.
- From: "Kevin R" <KEReyn@gte.net>
- Re: 747 crossfire conversion question.
- From: Shannen Durphey <shannen@grolen.com>
- Re: 747 crossfire conversion question.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BCC help
- From: "Rob Higgins" <rhiggins@cavva.com.au>
- archive location (was: Fuel Hoses, Found)
- From: Glen Beard <gbeard1@nycap.rr.com>
- WBO2 question NTK box
- From: Carl Summers <InTech@writeme.com>
- Re: 747 crossfire conversion question.
- From: "Kevin R" <KEReyn@gte.net>
- Re: 747 crossfire conversion question.
- RE: 747 crossfire conversion question.
- From: Carl Summers <InTech@writeme.com>
- RE: BCC help
- From: Carl Summers <InTech@writeme.com>
- Re: 747 crossfire conversion question.
- RE: 747 crossfire conversion question.
- From: Carl Summers <InTech@writeme.com>
- Re: 747 crossfire conversion question.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 747 crossfire conversion question.
- From: Shannen Durphey <shannen@grolen.com>
- Re: archive location (was: Fuel Hoses, Found)
- From: Shannen Durphey <shannen@grolen.com>
- Re: 747 crossfire conversion question.
- From: rr <RRauscher@nni.com>
- Re: BLM cell boundaries, Was: EPROM Programming
- From: rr <RRauscher@nni.com>
- EFI Pow wow
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 747 crossfire conversion question.
- From: Shannen Durphey <shannen@grolen.com>
- Spark Plug Analysis
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 747 crossfire conversion question.
- Re: 747 crossfire conversion question.
- From: "Kevin R" <KEReyn@gte.net>
- Re: 747 crossfire conversion question.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 747 crossfire conversion question.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM Programmer
- Re: 747 crossfire conversion question.
- From: "David Posea" <dposea@mindspring.com>
- RE: 747 crossfire conversion question.
- Re: 747 Rom Emulator / design
- From: "Daniel N" <gmecu@hotmail.com>
- NTK o2 sensor identification
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: 747 Rom Emulator / design
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: NTK o2 sensor identification
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 2000 Archives?
- Re: NTK o2 sensor identification
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- BCC DAs
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: NTK o2 sensor identification
- From: bearbvd@cmn.net (Greg Hermann)
- Re: backward injektors??
- From: Shannen Durphey <shannen@grolen.com>
- Re: backward injektors??
- From: "David Posea" <dposea@mindspring.com>
- Re: BCC help
- From: Ludis Langens <ludis@cruzers.com>
- Re: BCC help
- Re: BCC help
- From: Shannen Durphey <shannen@grolen.com>
- Re: BCC help
- From: Shannen Durphey <shannen@grolen.com>
- Re: BCC help
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: EPROM tuning head start
- Re: BCC help
- Re: BCC help
- From: Shannen Durphey <shannen@grolen.com>
- Re: BCC help
- From: Shannen Durphey <shannen@grolen.com>
- RE: BLM cell boundaries, Was: EPROM Programming
- From: Mika.Helander@softbit.fi
- Re: EPROM tuning head start
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: NTK o2 sensor identification
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: backward injektors??
- From: David Cooley <n5xmt@triad.rr.com>
- Re: backward injektors??
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Spark Plug Analysis
- From: John_Calabrese@ENGELHARD.COM
- Re: Spark Plug Analysis
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BCC help
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Spark Plug Analysis
- From: David Cooley <n5xmt@triad.rr.com>
- Re: BCC help
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: Spark Plug Analysis
- From: David Cooley <n5xmt@triad.rr.com>
- Re: BCC help
- From: "Bruce Plecan" <nacelp@bright.net>
- Macintosh Scantool Software...
- From: reizner@enteract.com
- Re: BCC help
- From: "Swayze" <kswayze@bellsouth.net>
- Re: BCC help
- From: Andrew Mattei <amattei@mindspring.com>
- Re: BCC help
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Spark Plug Analysis
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Spark Plug Analysis
- From: John_Calabrese@ENGELHARD.COM
- Re: Spark Plug Analysis
- From: David Cooley <n5xmt@triad.rr.com>
- 1227747 question
- From: "Jeff Kopp" <superchevyparts@mindspring.com>
- Re: 1227747 question
- From: David Cooley <n5xmt@triad.rr.com>
- Re: 1227747 question
- From: "Jeff Kopp" <superchevyparts@mindspring.com>
- pollution control device was :Re: Spark Plug Analysis
- From: "Swayze" <kswayze@bellsouth.net>
- Re: BCC help
- Re: 747 Rom Emulator / design
- From: rr <RRauscher@nni.com>
- Re: 1227747 question
- From: rr <RRauscher@nni.com>
- Re: Macintosh Scantool Software...
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: 1227747 question
- From: Richard Wakeling <kojab@ar.com.au>
- Pin functions determined by PROM?
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Pin functions determined by PROM?
- From: "Bruce Plecan" <nacelp@bright.net>
- Injector sizes / Rover 3.5 efi conversion
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- Re: 747 Rom Emulator / design
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Injector sizes / Rover 3.5 efi conversion
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 747 Rom Emulator / design
- From: "Bruce Plecan" <nacelp@bright.net>
- Test Only.
- From: Richard Wakeling <kojab@zxmail.com>
- Re: Injector sizes / Rover 3.5 efi conversion
- From: Shannen Durphey <shannen@grolen.com>
- Re: Injector sizes / Rover 3.5 efi conversion
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Pin functions determined by PROM?
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Pin functions determined by PROM?
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: tbi identified/ Injector sizes / Rover 3.5 efi conversion
- From: Shannen Durphey <shannen@grolen.com>
- Re: EPROM tuning head start
- From: "NickG" <nikog@mediaone.net>
- Re: pollution control device was :Re: Spark Plug Analysis
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: 747 Rom Emulator / design
- From: Ludis Langens <ludis@cruzers.com>
- Re: Pin functions determined by PROM?
- From: Ludis Langens <ludis@cruzers.com>
- Re: EPROM tuning head start
- Re: Injector opening time
- Re: EPROM tuning head start
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM tuning head start
- RE: EPROM tuning head start
- From: Carl Summers <InTech@writeme.com>
- RE: tbi identified/ Injector sizes / Rover 3.5 efi conversion
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- Re: EPROM tuning head start
- From: Shannen Durphey <shannen@grolen.com>
- Re: EPROM tuning head start
- From: Shannen Durphey <shannen@grolen.com>
- Re: EPROM tuning head start
- Re: EPROM tuning head start
- Re: tbi identified/ Injector sizes / Rover 3.5 efi conversion
- From: Shannen Durphey <shannen@grolen.com>
- Re: Injector opening time
- From: "Mike" <kswayze@bellsouth.net>
- Re: tbi identified/ Injector sizes / Rover 3.5 efi conversion
- From: Shannen Durphey <shannen@grolen.com>
- Re: 747 Rom Emulator / design
- From: Steve Lamb <lambsr@optushome.com.au>
- Re: EPROM tuning head start
- From: "NickG" <nikog@mediaone.net>
- RE: EPROM Programming
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: backward injektors??
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Injector sizes / Rover 3.5 efi conversion
- From: steve ravet <sravet@arm.com>
- RE: EPROM Programming
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: EPROM tuning head start
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: big inch SBC EFI intake mainfold
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Injector opening time
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: backward injektors??
- From: Len Sabatine <sabatine@epix.net>
- RE: big inch SBC EFI intake mainfold
- From: Len Sabatine <sabatine@epix.net>
- RE: big inch SBC EFI intake mainfold
- From: Squash <realsquash@yahoo.com>
- Re: Injector opening time
- Re: Injector opening time
- From: Frank F Parker <fparker@umich.edu>
- Re: EPROM tuning head start
- Off Topic: How to manually solder SMD chips?
- From: "Jose Carlos Felicio Rublescki" <rublesck@portoweb.com.br>
- RE: Off Topic: How to manually solder SMD chips?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Off Topic: How to manually solder SMD chips?
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: Off Topic: How to manually solder SMD chips?
- From: Andrew Mattei <amattei@mindspring.com>
- RE: Off Topic: How to manually solder SMD chips?
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: Off Topic: How to manually solder SMD chips?
- From: Pat Ford <pford@qnx.com>
- Re: Off Topic: How to manually solder SMD chips?
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Off Topic: How to manually solder SMD chips?
- From: steve ravet <sravet@arm.com>
- RE: Off Topic: How to manually solder SMD chips?
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: Injector opening time
- From: rr <RRauscher@nni.com>
- Changing PROM w/ batt connected
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Changing PROM w/ batt connected
- Re: Off Topic: How to manually solder SMD chips?
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: big inch SBC EFI intake mainfold
- Re: Was Chip carrier now sockets
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: Injector opening time
- From: Peter Gargano <peter@techedge.com.au>
- Re: Changing PROM w/ batt connected
- From: rr <RRauscher@nni.com>
- Bin Library
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Was Chip carrier now sockets
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Bin Library
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Bin Library
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: ECMs interchangable?
- Re: Bin Library
- From: Shannen Durphey <shannen@grolen.com>
- Re: Bin Library
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECMs interchangable?
- From: Ludis Langens <ludis@cruzers.com>
- RE ecm upgrade
- From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
- RE bcc help
- From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
- Re: Was Chip carrier now sockets
- From: steve ravet <sravet@arm.com>
- Re: Bin Library
- From: "Jeff Kopp" <jkopp@direcpc.com>
- Re: RE bcc help
- From: Ludis Langens <ludis@cruzers.com>
- Re: Was Chip carrier now sockets
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: big inch SBC EFI intake mainfold
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: big inch SBC EFI intake mainfold
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: RE bcc help
- Re: Injector opening time
- Re: big inch SBC EFI intake mainfold
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: Was Chip carrier now sockets
- From: "TK" <terryk@foothill.net>
- Re: Injector opening time
- From: "Mike" <kswayze@bellsouth.net>
- Re: Was Chip carrier now sockets
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Injector opening time
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: big inch SBC EFI intake mainfold
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Bin Library
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Injector opening time
- From: "Swayze" <kswayze@bellsouth.net>
- RE: Was Chip carrier now sockets
- From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
- bcc decodes please
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Re: big inch SBC EFI intake mainfold
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: bcc decodes please
- From: Pat Ford <pford@qnx.com>
- Re: bcc decodes please
- From: Michael Davis <davis@mail.eecis.udel.edu>
- TBI flow rate data clips from DIY-EFI
- From: "Fran and Bud" <quest100@gte.net>
- Re: bcc decodes please
- From: "Jeff Kopp" <superchevyparts@mindspring.com>
- Re: bcc decodes please
- From: Pat Ford <pford@qnx.com>
- Flex hoses for TBI's
- From: "Fran and Bud" <quest100@gte.net>
- Factory no VATS chip ?
- From: "Programmer" <nwester@eidnet.org>
- RE: Factory no VATS chip ?
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Flex hoses for TBI's
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: ADLD Data Stream Info Required
- From: Peter Gargano <peter@techedge.com.au>
- RE: TBI flow rate data clips from DIY-EFI
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- Re: Injector opening time
- From: rr <RRauscher@nni.com>
- Re: RE ecm upgrade
- From: rr <RRauscher@nni.com>
- Re: EPROM tuning head start
- From: Ludis Langens <ludis@cruzers.com>
- Re: EPROM tuning head start
- From: Shannen Durphey <shannen@grolen.com>
- Re: EPROM tuning head start
- Re: Off Topic: How to manually solder SMD chips?
- Re: RE ecm upgrade
- From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
- ECM calibrations for upgraded Xfire
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: ECM calibrations for upgraded Xfire
- From: "Bruce Plecan" <nacelp@bright.net>
- Re:Off Topic: How to manually solder SMD chips?
- From: Dig <turbodig@yahoo.com>
- 7747calibrations
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: ECM calibrations for upgraded Xfire
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: ECM calibrations for upgraded Xfire
- From: "Bruce Plecan" <nacelp@bright.net>
- laptop scantool.
- From: "Gregg Gruen" <gruegre@hotmail.com>
- Re: EPROM tuning head start
- From: Ludis Langens <ludis@cruzers.com>
- RE: ECM calibrations for upgraded Xfire
- From: Mike Rolica <mrolica@meridian-mag.com>
- 165 connectors
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: laptop scantool.
- Re: laptop scantool.
- Re: ECM calibrations for upgraded Xfire
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: ECM calibrations for upgraded Xfire
- From: "Dominic Sorresso" <surrexi2@home.com>
- RE: ECM calibrations for upgraded Xfire
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: ECM calibrations for upgraded Xfire
- From: "Dominic Sorresso" <surrexi2@home.com>
- RE: ECM calibrations for upgraded Xfire
- From: Mike Rolica <mrolica@meridian-mag.com>
- single vs double batch fire
- From: "NickG" <nikog@mediaone.net>
- RE: ECM calibrations for upgraded Xfire
- From: Gorden Jennings <gjennings@extremenetworks.com>
- Ford Codes
- From: Gabe <gellett@earthlink.net>
- posting methods...
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Ford Codes
- From: David Cooley <n5xmt@triad.rr.com>
- Re: single vs double batch fire
- From: romans@starstream.net (Romans, Mark)
- RE: Ford Codes
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: single vs double batch fire
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: ECM calibrations for upgraded Xfire
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM calibrations for upgraded Xfire
- From: "Dominic Sorresso" <surrexi2@home.com>
- hp-48G --slim efi content
- From: mswayze@truswood.com (Mike Swayze)
- Re: big inch SBC EFI intake mainfold
- From: Scott Knight <scott@scottknight.com>
- Re: ECM calibrations for upgraded Xfire
- From: "Dominic Sorresso" <surrexi2@home.com>
- Return Receipt
- From: Thomas McCabe <mccabet@mediaone.net>
- Re: big inch SBC EFI intake mainfold
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM calibrations for upgraded Xfire
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM calibrations for upgraded Xfire
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: big inch SBC EFI intake mainfold
- From: Scott Knight <scott@scottknight.com>
- 1227747 question
- Re: big inch SBC EFI intake mainfold
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM calibrations for upgraded Xfire
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: ECM calibrations for upgraded Xfire
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: big inch SBC EFI intake mainfold
- From: Scott Knight <scott@scottknight.com>
- Using the GMECM List - was Re: ECM calibr..
- From: Peter Gargano <peter@techedge.com.au>
- Re: ECM calibrations for upgraded Xfire
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: ECM calibrations for upgraded Xfire
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: big inch SBC EFI intake mainfold
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Using the GMECM List - was Re: ECM calibr..
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM calibrations for upgraded Xfire
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Haltech E6GM Questions
- ignition module
- From: chetwagner@uswest.net
- Re: Haltech E6GM Questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: single vs double batch fire
- From: romans@starstream.net (Romans, Mark)
- Re: ignition module
- From: "Bruce Plecan" <nacelp@bright.net>
- Editing proms
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BCC help again
- RE: ignition module
- From: Carl Summers <InTech@writeme.com>
- Re: Injector Duty cycle calculations
- From: Scott Knight <scott@scottknight.com>
- Help! Peak-hold injector driver design
- From: "Lou" <lfaustini@atlantech.net>
- Re: BCC help again
- From: Shannen Durphey <shannen@grolen.com>
- Re: Editing proms
- Cold 350 TBI
- From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
- RE: single vs double batch fire
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Editing proms
- From: "Jeff Kopp" <superchevyparts@mindspring.com>
- Re: Injector Duty cycle calculations
- From: timsiford@hushmail.com
- Re: Editing proms
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Cold 350 TBI
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Editing proms
- From: "Thomas Matthews" <tmatthew@stny.rr.com>
- Re: Editing proms
- From: "Craig Marcho" <not_valid_email@airmail.net>
- Re: ECM calibrations for upgraded Xfire
- From: "Dominic Sorresso" <surrexi2@home.com>
- GMEPro was Re: Editing proms
- From: Rick Lindstedt <rick@mafb.org>
- Re: Editing proms
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Cold 350 TBI
- From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
- Re: Editing proms
- From: timsiford@hushmail.com
- RE: big inch SBC EFI intake mainfold
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Editing proms
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Cold 350 TBI
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: Editing proms
- Re: Editing proms
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: Editing proms
- From: "Craig Marcho" <not_valid_email@airmail.net>
- RE: Editing proms
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Help! Peak-hold injector driver design
- From: steve ravet <sravet@arm.com>
- Re: Cold 350 TBI
- From: Andrew Mattei <amattei@mindspring.com>
- Re: Editing proms
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Cold 350 TBI
- From: "Bruce Plecan" <nacelp@bright.net>
- looking for a bin
- From: Pat Ford <pford@qnx.com>
- Re: Editing proms
- From: timsiford@hushmail.com
- RE: Cold 350 TBI
- From: "Guenther,Max [ASCO/PA]" <Mguenther@ASCO.COM>
- Re: looking for a bin
- From: Ludis Langens <ludis@cruzers.com>
- Re: looking for a bin
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Editing proms
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Editing proms
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: looking for a bin
- From: Pat Ford <pford@qnx.com>
- Shorty plugs (off topic)
- From: "Dave Zug" <dzug@delanet.com>
- Re: Editing proms (editorial)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Shorty plugs (off topic)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: looking for a bin
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: looking for a bin
- From: Ludis Langens <ludis@cruzers.com>
- Re: Editing proms
- Re: Editing proms (editorial)
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: Editing proms (editorial)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: looking for a bin
- From: Shannen Durphey <shannen@grolen.com>
- Re: Shorty plugs (off topic)
- From: Shannen Durphey <shannen@grolen.com>
- Re: Cold 350 TBI
- From: Shannen Durphey <shannen@grolen.com>
- Re: Editing proms (editorial)
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: hp-48G --slim efi content
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: GMEPro was Re: Editing proms
- From: Shannen Durphey <shannen@grolen.com>
- Re: hp-48G --slim efi content
- From: "TK" <terryk@foothill.net>
- Gmepro
- From: "TK" <terryk@foothill.net>
- Re: Editing proms (editorial)
- From: "Kevin R" <KEReyn@gte.net>
- Re: Gmepro
- From: "black maj" <blackmin@hotmail.com>
- Some basic questions, please read
- Re: Some basic questions, please read
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- MAF and 89 Vet stuff
- From: romans@starstream.net (Romans, Mark)
- Re: hp-48G --slim efi content
- From: "Mike" <kswayze@bellsouth.net>
- Re: Gmepro
- From: "Mike" <kswayze@bellsouth.net>
- Re: MAF and 89 Vet stuff
- From: "TK" <terryk@foothill.net>
- Re: MAF and 89 Vet stuff
- From: romans@starstream.net (Romans, Mark)
- Re: MAF and 89 Vet stuff
- From: romans@starstream.net (Romans, Mark)
- Re: Ported MAF
- Re: Gmepro
- From: Richard Wakeling <kojab@ar.com.au>
- Re: Ported MAF
- From: Ken Kelly <PCMdoc@surfree.com>
- Re: Bin Library
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: Pin functions determined by PROM?
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: Pin functions determined by PROM?
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: MAF and 89 Vet stuff
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Ported MAF
- From: Carl Summers <InTech@writeme.com>
- Re: Shorty plugs (off topic)
- From: "Dave Zug" <dzug@delanet.com>
- Re: Ported MAF
- From: romans@starstream.net (Romans, Mark)
- Dual EGT on Ebay
- From: "Dave Zug" <dzug@delanet.com>
- Re: Dual EGT on Ebay
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Dual EGT on Ebay(LINK)
- From: "Dave Zug" <dzug@delanet.com>
- RE: Ported MAF
- From: Carl Summers <InTech@writeme.com>
- Re: MAF and 89 Vet stuff
- From: Shannen Durphey <shannen@grolen.com>
- RE: MAF and 89 Vet stuff
- From: "J. T. Spilman" <jtstexas@home.com>
- Re: Gmepro
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Gmepro
- From: "TK" <terryk@foothill.net>
- Re: Gmepro
- From: "TK" <terryk@foothill.net>
- Re: Editing proms (editorial)
- From: Ludis Langens <ludis@cruzers.com>
- RE: Editing proms (editorial)
- From: Carl Summers <InTech@writeme.com>
- Re: MAF and 89 Vet stuff
- From: Shannen Durphey <shannen@grolen.com>
- Re: Ported MAF
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: Ported MAF
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ported MAF
- From: Peter Gargano <peter@techedge.com.au>
- Re: MAF and 89 Vet stuff
- From: "NickG" <nikog@mediaone.net>
- Re: MAF and 89 Vet stuff
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: Bin Library
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: Gmepro
- From: David Cooley <n5xmt@triad.rr.com>
- Re: MAF and 89 Vet stuff
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Bin Library
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ported MAF
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MAF and 89 Vet stuff
- From: romans@starstream.net (Romans, Mark)
- Re: MAF and 89 Vet stuff
- From: romans@starstream.net (Romans, Mark)
- Re: MAF and 89 Vet stuff
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 7730 ECM and Holley Projection
- Re: MAF and 89 Vet stuff
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Gmepro
- From: "TK" <terryk@foothill.net>
- Re: Gmepro
- From: "TK" <terryk@foothill.net>
- Re: MAF and 89 Vet stuff
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: 7730 ECM and Holley Projection
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MAF and 89 Vet stuff
- From: romans@starstream.net (Romans, Mark)
- Re: MAF and 89 Vet stuff
- From: "Bruce Plecan" <nacelp@bright.net>
- Vortec Throttle Body
- From: "Jeff Kopp" <jkopp@direcpc.com>
- Re: MAF and 89 Vet stuff
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: 7730 ECM and Holley Projection
- MEFI Controller
- From: romans@starstream.net (Romans, Mark)
- Re: MEFI Controller
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 7730 ECM and Holley Projection
- Re: MAF and 89 Vet stuff
- From: Shannen Durphey <shannen@grolen.com>
- Re: MAF and 89 Vet stuff
- From: Shannen Durphey <shannen@grolen.com>
- Re: Vortec Throttle Body
- From: Shannen Durphey <shannen@grolen.com>
- Re: Editing proms (editorial)
- From: "Kevin R" <KEReyn@gte.net>
- Re: MEFI Controller
- From: Shannen Durphey <shannen@grolen.com>
- Re: MEFI Controller
- From: Shannen Durphey <shannen@grolen.com>
- Re: MEFI Controller
- From: Shannen Durphey <shannen@grolen.com>
- Re: ECM 1228746 Help
- Re: Vortec Throttle Body
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- VETTE Communication Problem.
- From: John Smith <kojab@zxmail.com>
- 2 Bar map sensor and 730 BIN
- From: timsiford@hushmail.com
- Re: Help! Peak-hold injector driver design
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- Re: Vortec Throttle Body
- From: "Jeff Kopp" <superchevyparts@mindspring.com>
- Re: Vortec Throttle Body
- From: "Jeff Kopp" <superchevyparts@mindspring.com>
- Re: Vortec Throttle Body
- Re: Vortec Throttle Body
- From: "Jeff Kopp" <superchevyparts@mindspring.com>
- Re: MAF and 89 Vet stuff
- VETTE Communication Problem.
- From: Richard Wakeling <kojab@ar.com.au>
- Re: 1227747 question
- From: Scot Sealander <Sealand@clarityconnect.com>
- 1227165 CTS trouble
- From: John Bachman <jdbachman@redrose.net>
- Re: 1227165 CTS trouble
- From: "Bruce Plecan" <nacelp@bright.net>
- TPS boosters?
- From: "Thomas Matthews" <tmatthew@stny.rr.com>
- Re: 1227165 CTS trouble
- Re: TPS boosters?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TPS boosters?
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: TPS boosters?
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: Re: TPS boosters?
- From: rweatherford@mindspring.com
- Off idle transistions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1227165 CTS trouble
- From: Peter Gargano <peter@techedge.com.au>
- Re: 1227165 CTS trouble
- Re: 1227165 CTS trouble
- From: Len Sabatine <sabatine@epix.net>
- Leading guestions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Leading guestions
- From: Ludis Langens <ludis@cruzers.com>
- Re: 1227165 CTS trouble
- From: Peter Gargano <peter@techedge.com.au>
- RE: MAF and 89 Vet stuff
- From: Carl Summers <InTech@writeme.com>
- Re: 1227165 CTS trouble
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Leading guestions+1
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Leading guestions
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Leading guestions+1
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Leading guestions+1
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Leading guestions+1
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Leading guestions
- From: "Bruce Plecan" <nacelp@bright.net>
- ALDL European version
- From: "Bert de Boer" <bert@autotaal.nl>
- She's alive
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MAF and 89 Vet stuff
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: ALDL European version
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: She's alive
- Re: Off idle transistions
- From: "Dominic Sorresso" <surrexi2@home.com>
- RE: She's alive
- From: Mike Rolica <mrolica@meridian-mag.com>
- FW: question
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: She's alive
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: She's alive
- From: Gorden Jennings <gjennings@extremenetworks.com>
- Re: She's alive
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: She's alive
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: FW: question
- From: chetwagner@uswest.net
- Re: Off idle transistions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ALDL European version
- From: "alexpeper" <alexpeper@email.msn.com>
- Rich in closed loop idle
- O2 threads
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: O2 threads
- From: Matt S Bower <m.s.bower@cummins.com>
- RE: O2 threads
- From: Carl Summers <InTech@writeme.com>
- Re: O2 threads
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: O2 threads
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: O2 threads
- From: bearbvd@cmn.net (Greg Hermann)
- Re: O2 threads
- From: Roger Heflin <rah@horizon.hit.net>
- Re: ALDL European version
- From: Peter Gargano <peter@techedge.com.au>
- RE: O2 threads
- From: "J. T. Spilman" <jtstexas@home.com>
- Re: ALDL European version
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: O2 threads
- From: Shannen Durphey <shannen@grolen.com>
- Re: Off idle transistions
- From: Shannen Durphey <shannen@grolen.com>
- Re: Off idle transistions
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: Off idle transistions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: O2 threads
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Off idle transistions
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: O2 threads
- From: Scott Lundahl <scott@lumenetics.com>
- Re: ALDL European version
- From: Peter Gargano <peter@techedge.com.au>
- RE: O2 threads
- From: Squash <realsquash@yahoo.com>
- RE: O2 threads
- From: Squash <realsquash@yahoo.com>
- Plug Reading
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Tuning Eproms (was ECM 1228746 Help)
- RE: O2 threads
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- Re: O2 threads
- From: Peter Gargano <peter@techedge.com.au>
- RE: Injector sizes / Rover 3.5 efi conversion
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- 4wd range selector / vss in 747 application
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- Re: ALDL European version
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: Injector sizes / Rover 3.5 efi conversion
- From: "phil" <phil@muts.freeserve.co.uk>
- Re: Injector sizes / Rover 3.5 efi conversion
- From: "Mike" <kswayze@bellsouth.net>
- Re: Tuning Eproms (was ECM 1228746 Help)
- From: Shannen Durphey <shannen@grolen.com>
- Re: 4wd range selector / vss in 747 application
- From: Shannen Durphey <shannen@grolen.com>
- Re: 4wd range selector / vss in 747 application
- From: "Bruce Plecan" <nacelp@bright.net>
- Fw: Rich in closed loop idle
- Re: Tuning Eproms (was ECM 1228746 Help)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Fw: Rich in closed loop idle
- RE: Plug Reading
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: O2 threads
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: O2 threads
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Plug Reading
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Fw: Rich in closed loop idle
- RE: Plug Reading
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: She's alive
- From: DC Smith <morepoweral@tetranet.net>
- Re: Off idle transistions
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: Plug Reading
- From: "Bruce Plecan" <nacelp@bright.net>
- 305 TPI 4 Sale
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: She's alive
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Plug Reading
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: Plug Reading
- From: "Dominic Sorresso" <surrexi2@home.com>
- RE: Plug Reading
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Plug Reading
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Plug Reading
- From: Len Sabatine <sabatine@epix.net>
- Re: Plug Reading
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Plug Reading
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Mercury balancing
- RE: Plug Reading
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Plug Reading
- From: "Rudi M. Machilek" <rmachilek@nc.rr.com>
- Tuning Tips questions
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: Plug Reading
- From: "Bruce Plecan" <nacelp@bright.net>
- Fuel injector cleaning system?
- From: Gabe <gellett@earthlink.net>
- Re: Tuning Tips questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Odp: ALDL European version
- From: "Marek" <elemark@priv4.onet.pl>
- Re: Plug Reading
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Plug Reading
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Plug Reading
- From: "Dominic Sorresso" <surrexi2@home.com>
- Ford injectors
- From: Eric Norgard <eric@aztek-eng.com>
- Re: Plug Reading
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ford injectors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Off idle transistions
- From: Shannen Durphey <shannen@grolen.com>
- Re: Plug Reading
- From: "Swayze" <kswayze@bellsouth.net>
- Fw: Rich in closed loop idle (3rd post)
- Re: Tuning Tips questions
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: Off idle transistions
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: Ford injectors
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Off idle transistions
- From: Shannen Durphey <shannen@grolen.com>
- Re: Tuning Tips questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ford injectors
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: Off idle transistions
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: Fuel injector cleaning system?
- From: "Jim and Sharon Brady" <bradyiii@shore.intercom.net>
- Re: Ford injectors
- RE: Ford injectors
- From: "Craig Marcho" <marcho@flash.net>
- Re: Ford injectors
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: Tuning Tips questions
- From: "Dominic Sorresso" <surrexi2@home.com>
- RE: Plug Reading
- From: Len Sabatine <sabatine@epix.net>
- Re: Plug Reading
- From: Shannen Durphey <shannen@grolen.com>
- Re: Fuel injector cleaning system?
- From: Gabe <gellett@earthlink.net>
- Re: Plug Reading
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: Leading guestions+1
- From: Ludis Langens <ludis@cruzers.com>
- Re: Ford injectors
- From: "Dan Townsend" <xybertron@cox-internet.com>
- RE: Mercury balancing
- From: "Rudi M. Machilek" <rmachilek@nc.rr.com>
- Re: Mercury balancing
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Ford injectors
- From: timsiford@hushmail.com
- Re: Ford injectors
- From: timsiford@hushmail.com
- Re: Mercury balancing
- From: "Swayze" <kswayze@bellsouth.net>
- Re: ALDL European version
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: 2 Bar map sensor and 730 BIN
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: Ford injectors
- Re: 2 Bar map sensor and 730 BIN
- From: timsiford@hushmail.com
- Re: Ford injectors
- From: Bob Valentine <bob@tecmark.com>
- Odp: ALDL European version
- From: "Marek" <elemark@priv4.onet.pl>
- Re: Ford injectors
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Ford injectors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ford injectors
- From: Rick Lindstedt <rick@mafb.org>
- Re: turbo manifolds, (was 2 Bar map sensor and 730 BIN)
- From: "Jim Yeagley" <jyeag@core.com>
- Re: Ford injectors
- From: Kevin Crain <warpten@warpten.com>
- Re: Ford injectors
- From: Rick Lindstedt <rick@mafb.org>
- Re: Ford injectors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ford injectors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ford injectors
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: Ford injectors
- From: Kevin Crain <warpten@warpten.com>
- Re: 4wd range selector / vss in 747 application
- From: "Programmer" <nwester@eidnet.org>
- Re: Ford injectors
- From: Len Sabatine <sabatine@epix.net>
- Re: Ford injectors
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Ford injectors
- From: Roger Heflin <rah@horizon.hit.net>
- Re: 4wd range selector / vss in 747 application
- From: Shannen Durphey <shannen@grolen.com>
- Re: Ford injectors
- From: Shannen Durphey <shannen@grolen.com>
- Re: Ford injectors
- From: "NickG" <nikog@mediaone.net>
- 7730/ANHT code problem
- From: chetwagner@uswest.net
- Re: 7730/ANHT code problem
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 7730/ANHT code problem
- From: Peter Gargano <peter@techedge.com.au>
- Re: 7730/ANHT code problem
- From: romans@starstream.net (Romans, Mark)
- Re: Ford injectors (& Question)
- From: "Dave Zug" <dzug@delanet.com>
- Re: 7730/ANHT code problem
- From: chetwagner@uswest.net
- Re: Ford injectors (& Question)
- From: romans@starstream.net (Romans, Mark)
- RE: 7730/ANHT code problem
- From: "Gorden Jennings" <gjennings@ixpres.com>
- teknickle difikulty
- From: Carl Summers <InTech@writeme.com>
- Re: Ford injectors (& Question)
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Ford injectors (& Question)
- From: Mark <jamesc@venturalink.net>
- Re: 7730/ANHT code problem
- From: Ludis Langens <ludis@cruzers.com>
- Re: Editing proms (editorial)
- From: Ludis Langens <ludis@cruzers.com>
- RE: Ford injectors (& Question)
- From: Carl Summers <InTech@writeme.com>
- Re: teknickle difikulty
- From: Shannen Durphey <shannen@grolen.com>
- RE: teknickle difikulty
- From: Carl Summers <InTech@writeme.com>
- RE: Ford injectors
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: 7730/ANHT code problem
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: teknickle difikulty
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Ford injectors (& Question)
- From: Mike Rolica <mrolica@meridian-mag.com>
- Tweaking fueling values.
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: teknickle difikulty
- Re: Tweaking fueling values.
- From: "phil" <phil@muts.freeserve.co.uk>
- Re: teknickle difikulty
- From: "Walter Sherwin" <wsherwin@home.com>
- Injectors and AFPR
- From: Aaron G Kallotte <akallotte@juno.com>
- Re: Editing proms (editorial)
- From: "Kevin R" <KEReyn@gte.net>
- RE: Injectors and AFPR
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: teknickle difikulty
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Injectors and AFPR
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Tweaking fueling values.
- From: "Dave Zug." <dzug@delanet.com>
- Re: Injectors and AFPR
- From: Squash <realsquash@yahoo.com>
- Re: teknickle difikulty V6
- PROMEDIT
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Injectors and AFPR
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Ford injectors (& Question)
- From: "Dave Zug." <dzug@delanet.com>
- Re: PROMEDIT
- From: Squash <realsquash@yahoo.com>
- Re: Injectors and AFPR
- From: "Dave Zug." <dzug@delanet.com>
- RE: PROMEDIT
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: PROMEDIT
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Injectors and AFPR
- From: "Dominic Sorresso" <surrexi2@home.com>
- gmecm oN 383 mopar
- Re: teknickle difikulty
- From: "Dominic Sorresso" <surrexi2@home.com>
- Re: Injectors and AFPR
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: teknickle difikulty
- From: "Bruce Plecan" <nacelp@bright.net>
- Odp: Leading guestions+1
- From: "Marek" <elemark@priv4.onet.pl>
- Re: Odp: Leading guestions+1
- From: jamesc@venturalink.net
- Re: Odp: Leading guestions+1
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ford injectors (& Question)
- From: Roger Heflin <rah@horizon.hit.net>
- Re: 4wd range selector / vss in 747 application
- From: "Programmer" <nwester@eidnet.org>
- Re: Closed Loop Disable
- Re: Odp: Leading guestions+1
- From: Ludis Langens <ludis@cruzers.com>
- Re: GMEpro question
- Re: 4wd range selector / vss in 747 application
- From: Shannen Durphey <shannen@grolen.com>
- Re: 4wd range selector / vss in 747 application
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: PROMEDIT
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: 4wd range selector / vss in 747 application
- From: Shannen Durphey <shannen@grolen.com>
- Re: 4wd range selector / vss in 747 application
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: GMEpro question
- From: "Bruce Plecan" <nacelp@bright.net>
- 4L60e
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: teknickle difikulty
- Re: Fuel injector cleaning system?
- Re: Closed Loop Disable
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Closed Loop Disable
- Re: Editing proms (editorial)
- Re: Editing proms (editorial)
- Re: Editing proms (editorial)
- From: "Kevin R" <KEReyn@gte.net>
- Re: Ford injectors (& Question)
- From: "Dave Zug" <dzug@delanet.com>
- newby
- From: "Andrew Plunkett" <aplunkett@home.com>
- Re: Editing proms (editorial)
- From: Ludis Langens <ludis@cruzers.com>
- Re: newby
- From: "Bruce Plecan" <nacelp@bright.net>
- SBC TPI
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: newby
- From: bearbvd@cmn.net (Greg Hermann)
- TPI
- From: "Bruce Plecan" <nacelp@bright.net>
- 1226519 ECM
- From: Louis Baiani <neptilou@attcanada.net>
- Re: 1226519 ECM
- Re: Fuel injector cleaning system?
- From: Len Sabatine <sabatine@epix.net>
- Re: Fuel injector cleaning system?
- From: Shannen Durphey <shannen@grolen.com>
- Re: GMEpro question
- From: Len Sabatine <sabatine@epix.net>
- Re: newby
- From: "Andrew Plunkett" <aplunkett@home.com>
- Re: newby
- From: "Andrew Plunkett" <aplunkett@home.com>
- Re: newby
- Re: Fuel injector cleaning system?
- From: Len Sabatine <sabatine@epix.net>
- Old
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Re: Old
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: newby
- From: "Bruce Plecan" <nacelp@bright.net>
- Clarification on Memcal issues
- Re: 4L60e
- From: Len Sabatine <sabatine@epix.net>
- Re: newby
- From: Shannen Durphey <shannen@grolen.com>
- 16183247
- From: "Programmer" <nwester@eidnet.org>
- Re: Old
- From: "Programmer" <nwester@eidnet.org>
- 02 Voltage Calculation
- From: Berg Family <rgberg@srv.net>
- Re: Clarification on Memcal issues
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: GMEpro question
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Old
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: newby
- From: "Andrew Plunkett" <aplunkett@home.com>
- Re: newby
- From: "Andrew Plunkett" <aplunkett@home.com>
- Re: Fuel injector cleaning system?
- Re: newby
- From: "Andrew Plunkett" <aplunkett@home.com>
- RPM limit on 94-95 LT1 pcm's
- From: "Chris Bennight" <Christopher_Bennight@baylor.edu>
- Re: newby
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: newby
- From: "Andrew Plunkett" <aplunkett@home.com>
- '749 questions
- From: Bill Shaw <bshaw@connix.com>
- Re: '749 questions
- From: Shannen Durphey <shannen@grolen.com>
- Re: Old
- From: "Programmer" <nwester@eidnet.org>
- Re: Old
- From: "Bruce Plecan" <nacelp@bright.net>
- Needed to measure AFR
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Needed to measure AFR
- From: bearbvd@cmn.net (Greg Hermann)
- Prom image to .ecu
- From: "Andrew Plunkett" <aplunkett@home.com>
- Re: newby
- From: Ludis Langens <ludis@cruzers.com>
- Re: newby
- From: "Andrew Plunkett" <aplunkett@home.com>
- Re: newby
- From: Ludis Langens <ludis@cruzers.com>
- 332 Stim board - was '749 questions
- From: Peter Gargano <peter@techedge.com.au>
- Re: Prom image to .ecu
- From: David Cooley <n5xmt@triad.rr.com>
- a/f ratio, conventional engines
- From: Frank F Parker <fparker@umich.edu>
- reprogramming '747 limp home mode
- From: "NickG" <nikog@mediaone.net>
- Re: Needed to measure AFR
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 02 Voltage Calculation
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: 1226519 ECM
- From: Louis Baiani <neptilou@attcanada.net>
- Digest Format?
- From: Scott Lundahl <scott@lumenetics.com>
- C3 series or '7747 ECM for port fuel injection?
- From: Scott Lundahl <scott@lumenetics.com>
- Re: C3 series or '7747 ECM for port fuel injection?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 16183247
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 16183247
- From: David Cooley <n5xmt@triad.rr.com>
- Re: 16183247
- From: David Cooley <n5xmt@triad.rr.com>
- RamJet 350 spec/install instructions
- From: "Jeff Kopp" <jkopp@direcpc.com>
- 89 YB vs FB Prom Problem with AC
- From: romans@starstream.net (Romans, Mark)
- Re: 89 YB vs FB Prom Problem with AC
- From: Shannen Durphey <shannen@grolen.com>
- Fuel filter # found...
- From: Shannen Durphey <shannen@grolen.com>
- Re: 89 YB vs FB Prom Problem with AC
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: 332 Stim board - was '749 questions
- From: Bill Shaw <bshaw@connix.com>
- Re: GMEpro question
- Re: 332 Stim board - was '749 questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 16183247
- From: "Programmer" <nwester@eidnet.org>
- Re: 16183247
- From: "Programmer" <nwester@eidnet.org>
- Re: Fuel filter # found...
- From: Bob Valentine <bob@tecmark.com>
- ALDL info for 84 TBI Vette
- From: Louis Baiani <neptilou@attcanada.net>
- Plug colors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 16183247
- From: "Programmer" <nwester@eidnet.org>
- Re: Fuel filter # found...
- From: "Jeff Kopp" <jkopp@direcpc.com>
- Re: 16183247
- From: David Cooley <n5xmt@triad.rr.com>
- Re: 16183247
- From: "Programmer" <nwester@eidnet.org>
- Re: 16183247
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Fuel filter # found...
- From: Shannen Durphey <shannen@grolen.com>
- Re: 1226519 ECM
- From: Ludis Langens <ludis@cruzers.com>
- Re: 02 Voltage Calculation
- From: Ludis Langens <ludis@cruzers.com>
- Re: 16183247
- From: Ludis Langens <ludis@cruzers.com>
- Re: ALDL info for 84 TBI Vette
- From: Ludis Langens <ludis@cruzers.com>
- Re: GMEpro question
- From: Ludis Langens <ludis@cruzers.com>
- Re: reprogramming '747 limp home mode
- From: Ludis Langens <ludis@cruzers.com>
- too much timing - past 45 crank degrees
- Re: ALDL info for 84 TBI Vette
- From: "TK" <terryk@foothill.net>
- I finally took the leap - general tuning questions
- baffling turbo..
- From: Mike Rolica <mrolica@meridian-mag.com>
- 165-730 conversion
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: 89 YB vs FB Prom Problem with AC
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Fuel filter # found...
- From: "Jeff Kopp" <superchevyparts@mindspring.com>
- Re: baffling turbo..
- From: David Cooley <n5xmt@triad.rr.com>
- Re: gmecm oN 383 mopar
- From: John_Calabrese@ENGELHARD.COM
- Re: 165-730 conversion
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: 16183247
- From: "Programmer" <nwester@eidnet.org>
- Re: 16183247
- From: "Programmer" <nwester@eidnet.org>
- LT1 Editors
- Re: 16183247
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: baffling turbo..
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: baffling turbo..
- Re: newby
- From: Garfield Willis <garwillis@msn.com>
- Re: Needed to measure AFR
- From: "alexpeper" <alexpeper@email.msn.com>
- ECM Availability
- From: Garfield Willis <garwillis@msn.com>
- RE: Needed to measure AFR
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Needed to measure AFR
- From: Garfield Willis <garwillis@msn.com>
- Re: ECM Availability
- From: Squash <realsquash@yahoo.com>
- solid model
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: baffling turbo..
- From: Bob Valentine <bob@tecmark.com>
- Re: ECM Availability
- From: Garfield Willis <garwillis@msn.com>
- Re: ECM Availability
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: I finally took the leap - general tuning questions
- From: "Jim Sloan" <leroy@sunflower.com>
- Re: ECM Availability
- From: Garfield Willis <garwillis@msn.com>
- Re: Clarification on Memcal issues
- From: steve ravet <sravet@arm.com>
- Re: ECM Availability
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM Availability
- From: Garfield Willis <garwillis@msn.com>
- RE: ECM Availability
- From: Carl Summers <InTech@writeme.com>
- Re: Ford injectors (& Question) MORE
- From: "Dave Zug" <dzug@delanet.com>
- Re: ECM Availability
- From: Len Sabatine <sabatine@epix.net>
- Re: 332 Stim board - was '749 questions
- From: Bill Shaw <bshaw@connix.com>
- Re: 165-730 conversion
- From: "Dave Zug" <dzug@delanet.com>
- Re: ECM Availability
- From: Garfield Willis <garwillis@msn.com>
- Re: baffling turbo..
- From: "Dave Zug" <dzug@delanet.com>
- RE: Ford injectors (& Question) MORE
- From: Carl Summers <InTech@writeme.com>
- Re: Ford injectors (& Question) MORE
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ford injectors (& Question) MORE
- From: "Dave Zug" <dzug@delanet.com>
- Re: gmecm oN 383 mopar
- Re: GMEpro question
- From: "TK" <terryk@foothill.net>
- Re: Ford injectors (& Question) MORE
- From: Roger Heflin <rah@horizon.hit.net>
- Re: gmecm oN 383 mopar
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ford injectors (& Question) MORE
- From: "Dave Zug" <dzug@delanet.com>
- Re: baffling turbo..
- Re: Distrib needed
- Re: Clarification on Memcal issues
- From: Ludis Langens <ludis@cruzers.com>
- Re: Ford injectors (& Question) MORE
- From: "Dave Zug" <dzug@delanet.com>
- Re: Ford injectors (& Question) MORE
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ford injectors (& Question) MORE
- From: Roger Heflin <rah@horizon.hit.net>
- 747 & 4cyls
- From: "Andrew Plunkett" <aplunkett@home.com>
- RE: Ford injectors (& Question) MORE
- From: Carl Summers <InTech@writeme.com>
- RE: ECM Availability
- From: Carl Summers <InTech@writeme.com>
- Re: 02 Voltage Calculation
- From: Rob Berg <rgberg@srv.net>
- Re: 332 Stim board - was '749 questions
- From: Shannen Durphey <shannen@grolen.com>
- Need Laptop
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: 16183247
- From: "Programmer" <nwester@eidnet.org>
- Re: ECM Availability
- From: Garfield Willis <garwillis@msn.com>
- Firewall holes
- From: Bob Valentine <bob@tecmark.com>
- Re: Firewall holes
- From: Shannen Durphey <shannen@grolen.com>
- RE: Ford injectors (& Question) MORE
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Need Laptop
- From: "93 Formula" <red93formula@hotmail.com>
- RE: Need Laptop
- From: Bob Wooten <rwooten@advpol.com>
- Compiler?
- From: Kevin Crain <warpten@warpten.com>
- Re: 16183247
- From: David Cooley <n5xmt@triad.rr.com>
- Re: 16183247
- From: "Programmer" <nwester@eidnet.org>
- Re: 16183247
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Firewall holes
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 16183247
- From: David Cooley <n5xmt@triad.rr.com>
- Re: 747 & 4cyls
- From: Garfield Willis <garwillis@msn.com>
- New Bin
- From: David Cooley <n5xmt@triad.rr.com>
- Re: ECM Availability
- From: Garfield Willis <garwillis@msn.com>
- Re: ECM Availability
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 747 & 4cyls
- From: "Bruce Plecan" <nacelp@bright.net>
- EPROM Emulator
- 165.ecu file
- From: timsiford@hushmail.com
- Re: EPROM Emulator
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 16183247
- From: "Swayze" <kswayze@bellsouth.net>
- 77 caddy TB was Re: 16183247
- From: "Swayze" <kswayze@bellsouth.net>
- Re: EPROM Emulator
- From: "Swayze" <kswayze@bellsouth.net>
- Re: 165.ecu file
- Re: New Bin
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM Emulator
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 165.ecu file
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 747 & 4cyls
- From: Garfield Willis <garwillis@msn.com>
- Re: 165.ecu file
- From: "Craig Marcho" <not_valid_email@airmail.net>
- Re: Compiler?
- From: Peter Gargano <peter@techedge.com.au>
- Re: 747 & 4cyls
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM Emulator
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Ford injectors (& Question) MORE
- From: "Dave Zug." <dzug@delanet.com>
- Re: Ford injectors (& Question) MORE
- From: "Dave Zug." <dzug@delanet.com>
- Re: Ford injectors (& Question) MORE
- From: "Bruce Plecan" <nacelp@bright.net>
- Booster delete and MAF
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM Availability
- From: Len Sabatine <sabatine@epix.net>
- Re: Booster delete and MAF
- From: Shannen Durphey <shannen@grolen.com>
- Re: Compiler?
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: 747 & 4cyls
- From: Garfield Willis <garwillis@msn.com>
- Re: ECM Availability
- From: Garfield Willis <garwillis@msn.com>
- Re: Compiler?
- From: Roger Heflin <rah@horizon.hit.net>
- Re: 747 & 4cyls
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Booster delete and MAF
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Booster delete and MAF
- From: Scot Sealander <Sealand@clarityconnect.com>
- Last injector question... probably
- Re: Booster delete and MAF
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Booster delete and MAF
- From: Shannen Durphey <shannen@grolen.com>
- Re: Booster delete and MAF
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Compiler?
- From: Peter Gargano <peter@techedge.com.au>
- Re: Booster delete and MAF
- From: Shannen Durphey <shannen@grolen.com>
- Re: Last injector question... probably
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Compiler?
- From: "Kevin \"Pass the Prozak\" Crain" <kevin@warpten.com>
- Re: Compiler?
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: ECM Availability
- From: Frank F Parker <fparker@umich.edu>
- Re: ECM Availability
- From: David Cooley <n5xmt@triad.rr.com>
- Apologies, Re: Distrib needed
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls)
- From: "Andrew Plunkett" <aplunkett@home.com>
- Re: ECM Availability
- From: Len Sabatine <sabatine@epix.net>
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Compiler?
- From: "Dave Zug" <dzug@delanet.com>
- Remanufactured GM code - was Re: Compiler?
- From: Peter Gargano <peter@techedge.com.au>
- Re: Compiler?
- From: "Dave Zug" <dzug@delanet.com>
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls)
- From: "Andrew Plunkett" <aplunkett@home.com>
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls)
- From: Garfield Willis <garwillis@msn.com>
- Strategy difference auto / man
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- Re: Strategy difference auto / man
- From: Shannen Durphey <shannen@grolen.com>
- GM CTS sensors & MAT sensors
- From: Peter Gargano <peter@techedge.com.au>
- Re: GM CTS sensors & MAT sensors
- From: Shannen Durphey <shannen@grolen.com>
- Re: GM CTS sensors & MAT sensors
- From: Peter Gargano <peter@techedge.com.au>
- RE: Apologies, Re: Distrib needed
- From: Don.F.Broadus@ucm.com
- Re: GM CTS sensors & MAT sensors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ford injectors (& Question) MORE
- From: romans@starstream.net (Romans, Mark)
- Re: Strategy difference auto / man
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Strategy difference auto / man
- From: Garfield Willis <garwillis@msn.com>
- Re: Strategy difference auto / man
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls)
- From: Garfield Willis <garwillis@msn.com>
- Re: Last injector question... probably
- Tuning MAF based cars in terms of Fueling
- From: timsiford@hushmail.com
- Re: Strategy difference auto / man
- From: Garfield Willis <garwillis@msn.com>
- Re: Last injector question... probably
- Re: Tuning in Open Loop for Newby
- Re: Tuning in Open Loop for Newby
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls)
- From: "Patrick G. Moore" <patm@cais.com>
- Re: Tuning in Open Loop for Newby
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Last injector question... probably
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls)
- From: "Bruce Plecan" <nacelp@bright.net>
- injector drivers? what this?
- From: mswayze@truswood.com (Mike Swayze)
- Errr Ford ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Tuning in Open Loop for Newby
- From: rr <RRauscher@nni.com>
- Re: injector drivers? what this?
- From: Garfield Willis <garwillis@msn.com>
- Re: Errr Ford ?
- From: Squash <realsquash@yahoo.com>
- pfi & 747's
- From: rr <RRauscher@nni.com>
- Re: EPROM Emulator
- From: DC Smith <morepoweral@tetranet.net>
- Re: Errr Ford ?
- From: Len Sabatine <sabatine@epix.net>
- Re: ECM for 4cyl aircraft
- edelbrock bin
- Re: EPROM Emulator
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Tuning in Open Loop for Newby
- From: "Dennis Zacek" <bowtye8@ameritech.net>
- Re: GM CTS sensors & MAT sensors
- From: Shannen Durphey <shannen@grolen.com>
- Re: pfi & 747's
- From: Garfield Willis <garwillis@msn.com>
- Re: Strategy difference auto / man
- From: Shannen Durphey <shannen@grolen.com>
- Re: Tuning in Open Loop for Newby
- From: rr <RRauscher@nni.com>
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls)
- From: Shannen Durphey <shannen@grolen.com>
- Re: Errr Ford ?
- From: David Cooley <n5xmt@triad.rr.com>
- Re: pfi & 747's
- From: Shannen Durphey <shannen@grolen.com>
- Re: Tuning in Open Loop for Newby
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls)
- From: Garfield Willis <garwillis@msn.com>
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls)
- From: Garfield Willis <garwillis@msn.com>
- Voltage based MAF device
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: GM CTS sensors & MAT sensors
- From: Peter Gargano <peter@techedge.com.au>
- Re: Voltage based MAF device
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Remanufactured GM code - was Re: Compiler?
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls)
- Re: GM CTS sensors & MAT sensors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: GM CTS sensors & MAT sensors
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Remanufactured GM code - was Re: Compiler?
- From: rr <RRauscher@nni.com>
- Re: Tuning in Open Loop for Newby
- From: rr <RRauscher@nni.com>
- Re: pfi & 747's
- From: rr <RRauscher@nni.com>
- Re: pfi & 747's
- From: "Bruce Plecan" <nacelp@bright.net>
- FOR SALE: F-body rearend assy.
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- RE: Errr Ford?
- From: Speartech <speartec@iquest.net>
- Re: ALDL info for 84 TBI Vette
- From: Louis Baiani <neptilou@attcanada.net>
- Re: Errr Ford?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Voltage based MAF device
- From: romans@starstream.net (Romans, Mark)
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls)
- From: Garfield Willis <garwillis@msn.com>
- Re: ECM for 4cyl &Altitude (was 747 & 4cyls)
- From: Garfield Willis <garwillis@msn.com>
- Re: Errr Ford ?
- From: "Programmer" <nwester@eidnet.org>
- Re: Errr Ford ?
- From: "Programmer" <nwester@eidnet.org>
- RE: 747 & 4cyls
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Booster delete and MAF
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: Errr Ford ?
- From: Mike Rolica <mrolica@meridian-mag.com>
- RE: pfi & 747's
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Voltage based MAF device
- From: "Swayze" <kswayze@bellsouth.net>
- Re: injector drivers? what this?
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Voltage based MAF device
- From: Andrew Mattei <amattei@mindspring.com>
- Re: Errr Ford ?
- From: David Cooley <n5xmt@triad.rr.com>
- Re: EPROM Emulator
- From: DC Smith <morepoweral@tetranet.net>
- Re: Voltage based MAF device
- From: Len Sabatine <sabatine@epix.net>
- Re: EPROM Emulator
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Last injector question... probably
- Re: Last injector question... probably
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Last injector question... probably
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Last injector question... probably
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Booster delete -electric vacuum pumps
- eproms.
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: eproms.
- From: Squash <realsquash@yahoo.com>
- Re: Errr Ford ?
- From: Bob Valentine <bob@tecmark.com>
- Since were talking injectors......
- Re: Errr Ford ?
- From: steve ravet <sravet@arm.com>
- RE: eproms.
- From: Don.F.Broadus@ucm.com
- Re: Errr Ford ?
- From: David Cooley <n5xmt@triad.rr.com>
- RE: Ford injectors (& Question) MORE
- From: Carl Summers <InTech@writeme.com>
- 4 Cylinder DIS?
- From: Peter Gargano <peter@techedge.com.au>
- Re: Since were talking injectors......
- From: timsiford@hushmail.com
- Re: eproms.
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- RE: pfi & 747's
- From: Carl Summers <InTech@writeme.com>
- 1226519 ECM 160 baud ALDL output
- From: Louis Baiani <neptilou@attcanada.net>
- Re: 4 Cylinder DIS?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Booster delete -electric vacuum pumps
- From: Shannen Durphey <shannen@grolen.com>
- Re: 4 Cylinder DIS?
- From: Shannen Durphey <shannen@grolen.com>
- Re: pfi & 747's
- From: rr <RRauscher@nni.com>
- re: ECM for 4cyl and altitude.
- From: "Andrew Plunkett" <aplunkett@home.com>
- Re: ECM for 4cyl and altitude.
- From: Shannen Durphey <shannen@grolen.com>
- Re: ECM for 4cyl and altitude.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 4 Cylinder DIS?
- From: Peter Gargano <peter@techedge.com.au>
- Re: 4 Cylinder DIS?
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: 747 & 4cyls
- From: chetwagner@uswest.net
- Re: 4 Cylinder DIS?
- From: Shannen Durphey <shannen@grolen.com>
- Re: 4 Cylinder DIS?
- From: Peter Gargano <peter@techedge.com.au>
- Re: 4 Cylinder DIS?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 747 & 4cyls
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: pfi & 747's
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1226519 ECM 160 baud ALDL output
- From: "Programmer" <nwester@eidnet.org>
- Re: ECM for 4cyl and altitude.
- From: "Programmer" <nwester@eidnet.org>
- Re: ECM for 4cyl and altitude.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 1226519 ECM 160 baud ALDL output
- From: Ludis Langens <ludis@cruzers.com>
- Re: ECM for 4cyl and altitude.
- From: Shannen Durphey <shannen@grolen.com>
- Re: 4 Cylinder DIS?
- From: Shannen Durphey <shannen@grolen.com>
- Re: Since were talking injectors......
- Simple fuel cut question.
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- O2 sensor placement
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ECM for 4cyl and altitude.
- From: "Programmer" <nwester@eidnet.org>
- EFI POWWOW
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Simple fuel cut question.
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: Simple fuel cut question.
- From: Len Sabatine <sabatine@epix.net>
- RE: EFI POWWOW
- From: Mike Rolica <mrolica@meridian-mag.com>
- Re: Ford injectors (& Question) MORE
- From: "Dave Zug." <dzug@delanet.com>
- Re: Since were talking injectors......
- From: "Dave Zug." <dzug@delanet.com>
- Re: EFI POWWOW
- From: "Dave Zug." <dzug@delanet.com>
- Re: Since were talking injectors......
- Re: Tuning in Open Loop for Newby
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- Duty cycle formula
- From: Carl Summers <InTech@writeme.com>
- Re: Ford injectors (& Question) MORE
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Duty cycle formula
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Duty cycle formula
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Tuning in Open Loop for Newby
- From: "Bruce Plecan" <nacelp@bright.net>
- Late MAFs
- From: "Bruce Plecan" <nacelp@bright.net>
- Injectors
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Late MAFs
- From: Scott & Jennifer Peitzsch <jlg-sep@mediaone.net>
- Cable and other help needed
- From: Scott Pearson <camarors_ss@yahoo.com>
- Re: EFI POWWOW
- From: Shannen Durphey <shannen@grolen.com>
- Re: Injectors
- From: Shannen Durphey <shannen@grolen.com>
- RE: Duty cycle formula
- From: Carl Summers <InTech@writeme.com>
- Re: EFI POWWOW
- From: Scott Pearson <camarors_ss@yahoo.com>
- Re: EFI POWWOW
- From: Shannen Durphey <shannen@grolen.com>
- Re: EFI POWWOW
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ford injectors (& Question) MORE
- From: Roger Heflin <rah@horizon.hit.net>
- (no subject)
- From: Neal Whitaker <NWhitaker@carolina.rr.com>
- Re: Ford injectors (& Question) MORE
- From: "Dave Zug" <dzug@delanet.com>
- Re: (no subject)
- From: "Dave Zug" <dzug@delanet.com>
- Re: 1226519 ECM 160 baud ALDL output
- From: Louis Baiani <neptilou@attcanada.net>
- Re: 1226519 ECM 160 baud ALDL output
- From: Louis Baiani <neptilou@attcanada.net>
- how do I read this chip?
- Re: how do I read this chip?
- Re: Injectors
- RE: (no subject)
- From: Carl Summers <InTech@writeme.com>
- RE: how do I read this chip?
- From: Carl Summers <InTech@writeme.com>
- Re: Injectors
- Re: Voltage based MAF device
- From: "Rod Davis" <rodldavis@home.com>
- Re: how do I read this chip?
- From: Len Sabatine <sabatine@epix.net>
- Re: EFI POWWOW
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: how do I read this chip?
- From: Len Sabatine <sabatine@epix.net>
- Re: Injectors
- RE: (no subject)
- From: David Cooley <n5xmt@triad.rr.com>
- Re: how do I read this chip?
- From: "TK" <terryk@foothill.net>
- Re: (no subject)
- From: "TK" <terryk@foothill.net>
- Re: (no subject)
- From: "Programmer" <nwester@eidnet.org>
- Re: how do I read this chip?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: (no subject)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EFI POWWOW
- From: "Bruce Plecan" <nacelp@bright.net>
- Seeking 8051
- From: Bill Shaw <bshaw@connix.com>
- Re: (no subject)
- From: "Programmer" <nwester@eidnet.org>
- Re: Seeking 8051
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: (no subject)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EFI POWWOW
- From: Shannen Durphey <shannen@grolen.com>
- Re: Seeking 8051
- From: Shannen Durphey <shannen@grolen.com>
- Re: how do I read this chip?
- From: timsiford@hushmail.com
- RE: how do I read this chip?
- From: Carl Summers <InTech@writeme.com>
- Re: Seeking 8051
- From: Ken Kelly <PCMdoc@surfree.com>
- read problem solved
- Re: (no subject)
- From: David Cooley <n5xmt@triad.rr.com>
- New Software
- From: Berg Family <rgberg@srv.net>
- Re: New Software
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: Seeking 8051
- From: Len Sabatine <sabatine@epix.net>
- Re: New Software
- From: Rob Berg <rgberg@srv.net>
- Re: New Software
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: New Software
- From: Peter Gargano <peter@techedge.com.au>
- Re: New Software
- From: Rob Berg <rgberg@srv.net>
- Re: how do I read this chip?
- From: "TK" <terryk@foothill.net>
- [Fwd: Seeking 8051]
- From: Bill Shaw <bshaw@connix.com>
- CarChat and cable ...
- From: timsiford@hushmail.com
- Re: (no subject)
- From: "Programmer" <nwester@eidnet.org>
- 3.9k Ohm Diagnostic mode on a P4.
- From: Peter Gargano <peter@techedge.com.au>
- blm addys
- From: DenniS Zacek <bowtye8@yahoo.com>
- Re: 3.9k Ohm Diagnostic mode on a P4.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: blm addys
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: (no subject)
- From: "Bruce Plecan" <nacelp@bright.net>
- CCC stuff for sale
- From: "Bruce Plecan" <nacelp@bright.net>
- Frequency Maf
- From: Matt S Bower <m.s.bower@cummins.com>
- Still having problems
- From: Louis Baiani <neptilou@attcanada.net>
- Re: Seeking 8051
- From: Bill Shaw <bshaw@connix.com>
- Re: blm addys
- From: DenniS Zacek <bowtye8@yahoo.com>
- Re: 3.9k Ohm Diagnostic mode on a P4.
- From: Ludis Langens <ludis@cruzers.com>
- Re: Still having problems
- From: Ludis Langens <ludis@cruzers.com>
- Re: blm addys
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: CarChat and cable ...
- From: Rob Berg <rgberg@srv.net>
- CarChat V1.1
- From: Rob Berg <rgberg@srv.net>
- Re: 3.9k Ohm Diagnostic mode on a P4.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Frequency Maf
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: CarChat and cable ...
- From: David Cooley <n5xmt@triad.rr.com>
- Re: CarChat and cable ...
- From: Peter Gargano <peter@techedge.com.au>
- Re: Frequency Maf
- From: Len Sabatine <sabatine@epix.net>
- Re: Frequency Maf
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: CarChat and cable ...
- From: Dale Klein <daklein@netzero.net>
- Re: Cable and other help needed
- From: Dale Klein <daklein@netzero.net>
- Re: CarChat and cable ...
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: CarChat and cable ...
- From: Rob Berg <rgberg@srv.net>
- TBI injectors
- From: chetwagner@uswest.net
- Re: CarChat and cable ...
- From: David Cooley <n5xmt@triad.rr.com>
- Re: MAF vs. MAP
- RE: TBI injectors
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- RE: MAF vs. MAP
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: MAF vs. MAP
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: CarChat and cable ...
- From: "Programmer" <nwester@eidnet.org>
- Piggyback adapters for CalPak
- From: timsiford@hushmail.com
- Re: TBI injectors
- From: steve ravet <sravet@arm.com>
- Re: CarChat V1.1
- From: steve ravet <sravet@arm.com>
- Re: Piggyback adapters for CalPak
- Re: Piggyback adapters for CalPak
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Piggyback adapters for CalPak
- From: Peter Gargano <peter@techedge.com.au>
- Re: 3.9k Ohm Diagnostic mode on a P4.
- From: Garfield Willis <garwillis@msn.com>
- Re: 3.9k Ohm Diagnostic mode on a P4.
- From: "Bruce Plecan" <nacelp@bright.net>
- New spark plugs
- From: David Cooley <n5xmt@triad.rr.com>
- Dead O2 sensor
- From: Ludis Langens <ludis@cruzers.com>
- Re: New spark plugs
- From: John_Calabrese@ENGELHARD.COM
- Low RPM roughness
- From: Reid Bishop <rbish@ibm.net>
- Re: Dead O2 sensor
- From: John_Calabrese@ENGELHARD.COM
- Re: Piggyback adapters for CalPak
- From: DenniS Zacek <bowtye8@yahoo.com>
- Re: Dead O2 sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: New spark plugs
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Low RPM roughness
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Piggyback adapters for CalPak
- Re: Dead O2 sensor
- From: David Cooley <n5xmt@triad.rr.com>
- Re: New spark plugs
- From: David Cooley <n5xmt@triad.rr.com>
- Re: MAF vs. MAP
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: New spark plugs
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Low RPM roughness
- Off: Shoulda had ABS on the Hard Drive
- From: Shannen Durphey <shannen@grolen.com>
- Re: TBI injectors
- From: Shannen Durphey <shannen@grolen.com>
- Re: Piggyback adapters for CalPak
- From: Shannen Durphey <shannen@grolen.com>
- 403 Olds FI lives
- From: Bob Valentine <bob@tecmark.com>
- Re: 403 Olds FI lives
- From: Shannen Durphey <shannen@grolen.com>
- Re: 403 Olds FI lives
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Off: Shoulda had ABS on the Hard Drive
- Odp: Dead O2 sensor
- From: "Marek" <elemark@priv4.onet.pl>
- dual tbi on a big block
- From: ZZZ Temp-Gold <Temp-Gold@highlandsins.com>
- Re: dual tbi on a big block
- From: Squash <realsquash@yahoo.com>
- Re: 403 Olds FI lives
- From: "Patrick G. Moore" <patm@cais.com>
- RE: Low RPM roughness
- From: Reid Bishop <rbish@ibm.net>
- Re: dual tbi on a big block
- From: John_Calabrese@ENGELHARD.COM
- Re: Low RPM roughness
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: dual tbi on a big block
- From: Gabe <gellett@earthlink.net>
- Found my 8051
- From: Bill Shaw <bshaw@connix.com>
- Diacom reports 23 battery volts?
- From: "Jim Sloan" <leroy@sunflower.com>
- Re: Found my 8051
- From: Andrew Mattei <amattei@mindspring.com>
- Re: Diacom reports 23 battery volts?
- From: "Programmer" <nwester@eidnet.org>
- wiring diagram for 87 camaro - *no EFI* please help!!
- From: John_Calabrese@ENGELHARD.COM
- Re: Low RPM roughness
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- RE: Diacom reports 23 battery volts?
- From: "Jim Sloan" <leroy@sunflower.com>
- Re: Diacom reports 23 battery volts?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: wiring diagram for 87 camaro - *no EFI* please help!!
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: wiring diagram for 87 camaro - *no EFI* please help!!
- From: John_Calabrese@ENGELHARD.COM
- Mustang runnin a 730
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Diacom reports 23 battery volts?
- From: Ludis Langens <ludis@cruzers.com>
- Re: Dead O2 sensor
- From: Ludis Langens <ludis@cruzers.com>
- AXAT9713.bin
- From: "Jim Sloan" <leroy@sunflower.com>
- Re: Dead O2 sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- 1227847
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: dual tbi on a big block
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Off: Shoulda had ABS on the Hard Drive
- From: "Bruce Plecan" <nacelp@bright.net>
- non efi SBC hyd. roller cam for sale
- From: Marc Piccioni <piccioni@cadvision.com>
- Fwd: Howto: Excel does binary/octal/hex/dec conversions
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: wiring diagram for 87 camaro - *no EFI* please help!!
- From: Shannen Durphey <shannen@grolen.com>
- Re: Off: Shoulda had ABS on the Hard Drive
- From: Shannen Durphey <shannen@grolen.com>
- Re: dual tbi on a big block
- From: Garfield Willis <garwillis@msn.com>
- Re: 1227847
- From: Shannen Durphey <shannen@grolen.com>
- Re: 1227847
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Found my 8051
- From: Glen Beard <gbeard1@nycap.rr.com>
- Re: Found my 8051
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: dual tbi on a big block, now parelllel ecms
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Diacom reports 23 battery volts?
- From: "Programmer" <nwester@eidnet.org>
- Re: Diacom reports 23 battery volts?
- From: "Programmer" <nwester@eidnet.org>
- Re: 1227847
- From: Ludis Langens <ludis@cruzers.com>
- Re: blm addys
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- The one and ONLY hex editor
- From: Peter Gargano <peter@techedge.com.au>
- Switching on P4 O/P's.
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: blm addys
- From: Shannen Durphey <shannen@grolen.com>
- Re: Found my 8051
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: blm addys
- From: "Programmer" <nwester@eidnet.org>
- Re: dual tbi on a big block, now parelllel ecms
- From: Garfield Willis <garwillis@msn.com>
- SBC intake center bolt holes
- injecting oldsmobiles
- Re: Off: Shoulda had ABS on the Hard Drive
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- Re: injecting oldsmobiles
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: injecting oldsmobiles
- RE: Diacom reports 23 battery volts?
- From: "Jim Sloan" <leroy@sunflower.com>
- ANWP3746.bin
- From: "Jim Sloan" <leroy@sunflower.com>
- still going lean
- From: DenniS Zacek <bowtye8@yahoo.com>
- Re: injecting oldsmobiles
- From: Bob Valentine <bob@tecmark.com>
- Re: still going lean
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: still going lean
- BINs
- Re: still going lean
- From: DenniS Zacek <bowtye8@yahoo.com>
- Re: still going lean
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: still going lean
- Re: still going lean
- Re: still going lean
- 1227747 bins
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: blm addys
- From: Shannen Durphey <shannen@grolen.com>
- Re: SBC intake center bolt holes
- From: Shannen Durphey <shannen@grolen.com>
- Re: SBC intake center bolt holes
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: blm addys
- From: "Programmer" <nwester@eidnet.org>
- Re: still going lean
- From: timsiford@hushmail.com
- Re: still going lean
- From: DenniS Zacek <bowtye8@yahoo.com>
- 5.7L Y body 6 spd binary?
- From: "TK" <terryk@foothill.net>
- Re: still going lean
- From: chetwagner@uswest.net
- Re: 1227747 bins
- Re: 5.7L Y body 6 spd binary?
- From: Shannen Durphey <shannen@grolen.com>
- Re: 5.7L Y body 6 spd binary?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 5.7L Y body 6 spd binary?
- From: "TK" <terryk@foothill.net>
- Re: 5.7L Y body 6 spd binary?
- From: "TK" <terryk@foothill.net>
- Anyone need some 2532 eproms?
- From: "TK" <terryk@foothill.net>
- Re: 5.7L Y body 6 spd binary?
- From: "TK" <terryk@foothill.net>
- 1991 Y body 6 speed bin file
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: 5.7L Y body 6 spd binary?
- From: Ludis Langens <ludis@cruzers.com>
- Re: still going lean
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: 5.7L Y body 6 spd binary?
- From: Shannen Durphey <shannen@grolen.com>
- Re: 5.7L Y body 6 spd binary?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Anyone need some 2532 eproms?
- Re: 5.7L Y body 6 spd binary?
- From: David Cooley <n5xmt@triad.rr.com>
- Re: 5.7L Y body 6 spd binary?
- Re: 5.7L Y body 6 spd binary?
- From: "TK" <terryk@foothill.net>
- Re: Anyone need some 2532 eproms?
- From: "Programmer" <nwester@eidnet.org>
- Re: 5.7L Y body 6 spd binary?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 5.7L Y body 6 spd binary?
- From: "Bruce Plecan" <nacelp@bright.net>
- '7730 and nitromethane
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: '7730 and nitromethane
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '7730 and nitromethane
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: '7730 and nitromethane
- From: David Cooley <n5xmt@triad.rr.com>
- Re: '7730 and nitromethane
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Dead O2 sensor
- From: Louis Baiani <neptilou@attcanada.ca>
- Re: Switching on P4 O/P's.
- From: Ludis Langens <ludis@cruzers.com>
- Re: Anyone need some 2532 eproms?
- From: "TK" <terryk@foothill.net>
- Re: still going lean
- From: "Bruce Plecan" <nacelp@bright.net>
- Cam Position Sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '7730 and nitromethane
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: '7730 and nitromethane
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Anyone need some 2532 eproms?
- From: "TK" <terryk@foothill.net>
- aldl cable/program
- From: chetwagner@uswest.net
- Re: Mass
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Re: Mass
- From: Garfield Willis <garwillis@msn.com>
- Re: '7730 and nitromethane
- From: "Chris Bennight" <Christopher_Bennight@baylor.edu>
- Re: Found my 8051
- From: Glen Beard <gbeard1@nycap.rr.com>
- Export .bin file for 16188051 (94/95 F-body)
- From: "Chris Bennight" <Christopher_Bennight@baylor.edu>
- Re: Anyone need some 2532 eproms?
- From: "Programmer" <nwester@eidnet.org>
- Re: Anyone need some 2532 eproms?
- From: "Programmer" <nwester@eidnet.org>
- Ebay Buick ECM
- Re: Anyone need some 2532 eproms?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Anyone need some 2532 eproms?
- From: "Programmer" <nwester@eidnet.org>
- Re: Anyone need some 2532 eproms?
- From: "TK" <terryk@foothill.net>
- Re: Anyone need some 2532 eproms?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Cam Position Sensor
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: Anyone need some 2532 eproms?
- From: Shannen Durphey <shannen@grolen.com>
- Re: Cam Position Sensor
- From: "TK" <terryk@foothill.net>
- Re: Anyone need some 2532 eproms?
- From: "Programmer" <nwester@eidnet.org>
- Re: Switching on P4 O/P's.
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Switching on P4 O/P's.
- From: Peter Gargano <peter@techedge.com.au>
- Re: Cam Position Sensor
- From: "TK" <terryk@foothill.net>
- aussie
- From: "Daniel Collins" <bossute@hotmail.com>
- Re: Anyone need some 2532 eproms?
- From: "Programmer" <nwester@eidnet.org>
- Re: Cam Position Sensor
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: Cam Position Sensor
- From: "TK" <terryk@foothill.net>
- Re: Cam Position Sensor
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: Cam Position Sensor
- From: "TK" <terryk@foothill.net>
- Re: still going lean
- From: DenniS Zacek <bowtye8@yahoo.com>
- Re: Cam Position Sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- spark data on 1993 TBI 5.7 engine
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- Re: Cam Position Sensor
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: spark data on 1993 TBI 5.7 engine
- Just FYI: numbers off PROM
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Just FYI: numbers off PROM
- From: Ludis Langens <ludis@cruzers.com>
- Re: Just FYI: numbers off PROM
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: aldl cable/program
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Whattza C.A.R.S. ??
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Cam Position Sensor
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Switching on P4 O/P's.
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Whattza C.A.R.S. ??
- From: romans@starstream.net (Romans, Mark)
- Re: Whattza C.A.R.S. ??
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Whattza C.A.R.S. ??
- From: David Cooley <n5xmt@triad.rr.com>
- Re: spark data on 1993 TBI 5.7 engine
- From: steve ravet <sravet@arm.com>
- Re: aussie
- From: "Rob Higgins" <rhiggins@cavva.com.au>
- Re: Whattza C.A.R.S. ??
- From: "Bruce Plecan" <nacelp@bright.net>
- started the faq.
- From: steve ravet <sravet@arm.com>
- Re: aldl cable/program
- Re: spark data on 1993 TBI 5.7 engine
- From: Shannen Durphey <shannen@grolen.com>
- Re: Cam Position Sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- scan toolz
- From: "Mike Rolica" <97005620@lambton.on.ca>
- Re: scan toolz
- From: Kevin Crain <kevin@warpten.com>
- Re: spark data on 1993 TBI 5.7 engine
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- aldl cable
- From: "Mike Rolica" <97005620@lambton.on.ca>
- Re: aldl cable
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: scan toolz
- From: romans@starstream.net (Romans, Mark)
- RE: aldl cable
- From: "Scott Feaver" <scott@j-body.com>
- Re: aldl cable
- From: David Cooley <n5xmt@triad.rr.com>
- Prom IDs
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- RE: scan toolz
- From: "Mike Rolica" <97005620@lambton.on.ca>
- reprogramming TPIS chip
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- RE: aldl cable
- From: "Mike Rolica" <97005620@lambton.on.ca>
- Re: reprogramming TPIS chip
- From: romans@starstream.net (Romans, Mark)
- Re: Prom IDs
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- ALDL data
- From: "Jason R. Haines" <jhaines@lingenfelter.com>
- Ol Buick (or when Grumpy goes to play)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Prom IDs
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: reprogramming TPIS chip
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: scan toolz
- Re: reprogramming TPIS chip
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: reprogramming TPIS chip
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: Prom IDs
- From: Shannen Durphey <shannen@grolen.com>
- Re: spark data on 1993 TBI 5.7 engine
- From: Shannen Durphey <shannen@grolen.com>
- Re: spark data on 1993 TBI 5.7 engine
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ALDL data
- From: "Dave Zug" <dzug@delanet.com>
- Re: spark data on 1993 TBI 5.7 engine
- From: "Dave Zug" <dzug@delanet.com>
- Re: reprogramming TPIS chip
- From: romans@starstream.net (Romans, Mark)
- scan tool progresss
- From: "Mike Rolica" <97005620@lambton.on.ca>
- RE: ALDL data
- From: "Mike Rolica" <97005620@lambton.on.ca>
- Re: ALDL data
- From: "Dave Zug" <dzug@delanet.com>
- FWIW
- From: "Bruce Plecan" <nacelp@bright.net>
- HEi module output
- From: Louis Baiani <neptilou@attcanada.ca>
- Re: Prom IDs
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: FWIW
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Prom IDs
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: reprogramming TPIS chip
- From: timsiford@hushmail.com
- Re: reprogramming TPIS chip
- Re: Datamaster program
- Binary image for CRY or CRZ
- From: Peter Gargano <peter@techedge.com.au>
- Re: reprogramming TPIS chip
- From: romans@starstream.net (Romans, Mark)
- Carbytes (was: scan tool progresss)
- From: Bill Shaw <bshaw@connix.com>
- TPI flow numbers (was Re: ALDL data)
- From: Kevin Crain <kevin@warpten.com>
- Re: Datamaster program
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: TPI flow numbers (was Re: ALDL data)
- From: "Dave Zug" <dzug@delanet.com>
- Re: TPI flow numbers (was Re: ALDL data)
- From: Kevin Crain <kevin@warpten.com>
- Re: Binary image for CRY or CRZ
- From: Shannen Durphey <shannen@grolen.com>
- Re: Prom IDs
- From: Shannen Durphey <shannen@grolen.com>
- Re: TPI flow numbers (was Re: ALDL data)
- From: "Dave Zug" <dzug@delanet.com>
- Re: Binary image for CRY or CRZ
- From: Shannen Durphey <shannen@grolen.com>
- RE: Prom IDs....now Snap-on book
- From: Carl Summers <InTech@writeme.com>
- ALDL interface diagnostic program
- From: "Paul Blackmore" <paul_blackmore@xtra.co.nz>
- Re: TPI flow numbers (was Re: ALDL data)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ALDL interface diagnostic program
- From: Peter Gargano <peter@techedge.com.au>
- Re: Binary image for CRY or CRZ
- From: Ludis Langens <ludis@cruzers.com>
- Re: ALDL interface diagnostic program
- From: "Dave Zug" <dzug@delanet.com>
- Re: Binary image for CRY or CRZ
- From: Peter Gargano <peter@techedge.com.au>
- RE: ALDL interface diagnostic program
- From: Carl Summers <InTech@writeme.com>
- Re: ALDL interface diagnostic program
- From: Peter Gargano <peter@techedge.com.au>
- Prom ID
- From: "Fran and Bud" <quest100@gte.net>
- Introduction
- From: "Tom Gardner" <tgardner86@home.com>
- Re: ALDL interface diagnostic program
- From: "Dave Zug" <dzug@delanet.com>
- Re: ALDL interface diagnostic program
- From: "Dave Zug" <dzug@delanet.com>
- Prom ID reminder
- From: "Fran and Bud" <quest100@gte.net>
- Re: ALDL interface diagnostic program
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- RE: ALDL interface diagnostic program
- From: Carl Summers <InTech@writeme.com>
- Re: Introduction
- From: "Dave Zug" <dzug@delanet.com>
- Re: Introduction
- From: "Bruce Plecan" <nacelp@bright.net>
- Automotive Calculations
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ALDL interface diagnostic program
- From: "Dave Zug" <dzug@delanet.com>
- Re: Introduction
- From: romans@starstream.net (Romans, Mark)
- RE: Introduction
- From: Carl Summers <InTech@writeme.com>
- Re: ALDL interface diagnostic program
- From: "Dave Zug" <dzug@delanet.com>
- Re: Introduction
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: reprogramming TPIS chip
- From: "Programmer" <nwester@eidnet.org>
- Re: Prom IDs
- From: "Programmer" <nwester@eidnet.org>
- Re: Introduction
- From: romans@starstream.net (Romans, Mark)
- Re: Prom ID reminder
- From: "Programmer" <nwester@eidnet.org>
- Re: ALDL data
- From: "Programmer" <nwester@eidnet.org>
- Re: reprogramming TPIS chip
- From: "Dan Plaskett" <dynastydan@worldnet.att.net>
- Re: reprogramming TPIS chip
- From: David Cooley <n5xmt@triad.rr.com>
- Re: ALDL interface diagnostic program
- From: Ludis Langens <ludis@cruzers.com>
- Re: vr ecu mapedit
- From: "Daniel Collins" <bossute@hotmail.com>
- Re: reprogramming TPIS chip
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: vr ecu mapedit
- From: "Bruce Plecan" <nacelp@bright.net>
- B Codes
- From: "Dave Zug" <dzug@delanet.com>
- Re: reprogramming TPIS chip
- From: romans@starstream.net (Romans, Mark)
- Prom Burner
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Prom Burner
- Re: Prom Burner
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: reprogramming TPIS chip
- From: "Programmer" <nwester@eidnet.org>
- Re: Datamaster program
- Re: Prom Burner
- From: David Cooley <n5xmt@triad.rr.com>
- Re: B Codes
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: Prom Burner
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Prom Burner
- From: romans@starstream.net (Romans, Mark)
- Re: B Codes
- From: "Dave Zug" <dzug@delanet.com>
- Re: Prom Burner
- From: romans@starstream.net (Romans, Mark)
- Re: Prom Burner
- From: "Dave Zug" <dzug@delanet.com>
- Re: Prom Burner
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Prom Burner
- From: Ludis Langens <ludis@cruzers.com>
- Re: B Codes
- From: Ludis Langens <ludis@cruzers.com>
- Re: B Codes
- RE: B Codes
- From: "Jim Sloan" <leroy@sunflower.com>
- Re: B Codes
- Re: B Codes
- From: Peter Gargano <peter@techedge.com.au>
- Re: B Codes
- carbytes and carchat
- From: "Mike Rolica" <97005620@lambton.on.ca>
- Re: LT-1 Heads
- Re: LT-1 Heads
- Re: LT-1 Heads
- Re: LT-1 Heads
- From: Gabe <gellett@earthlink.net>
- Re: B Codes
- From: "Dave Zug" <dzug@delanet.com>
- Re: B Codes
- From: "TK" <terryk@foothill.net>
- Re: B Codes
- From: "TK" <terryk@foothill.net>
- Re: Prom Burner & EEPROM's
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: LT-1 Heads
- From: romans@starstream.net (Romans, Mark)
- Re: B Codes
- RE: LT-1 Heads
- From: Carl Summers <InTech@writeme.com>
- Re: B Codes
- From: "Dave Zug" <dzug@delanet.com>
- Re: puzzled by almighty memcal.
- From: "Dave Zug" <dzug@delanet.com>
- Re: B Codes
- From: Peter Gargano <peter@techedge.com.au>
- CSH, HQ closin for a few days
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: CSH, HQ closin for a few days
- From: "TK" <terryk@foothill.net>
- Re: Prom Burner & EEPROM's
- From: Bob Valentine <bob@tecmark.com>
- Re: LT-1 Heads
- From: romans@starstream.net (Romans, Mark)
- Re: CSH, HQ closin for a few days
- From: romans@starstream.net (Romans, Mark)
- RE: B Codes
- From: Carl Summers <InTech@writeme.com>
- Re: Re: vr ecu mapedit
- From: Shannen Durphey <shannen@grolen.com>
- Re: Prom Burner
- From: Shannen Durphey <shannen@grolen.com>
- Re: Prom Burner
- From: Shannen Durphey <shannen@grolen.com>
- Re: Prom Burner
- From: Shannen Durphey <shannen@grolen.com>
- Re: CSH, HQ closin for a few days
- From: "Programmer" <nwester@eidnet.org>
- 1227429
- From: Bob Valentine <bob@tecmark.com>
- Re: CSH, HQ closin for a few days
- From: Shannen Durphey <shannen@grolen.com>
- Re: LT-1 Heads
- Re: B Codes
- From: Ludis Langens <ludis@cruzers.com>
- Re: CSH, HQ closin for a few days
- From: Ludis Langens <ludis@cruzers.com>
- disassembly of 6803 code
- From: Arnaud Westenberg <arnaud@casema.net>
- Re: LT-1 Heads
- From: Shannen Durphey <shannen@grolen.com>
- Re: CSH, HQ closin for a few days
- From: "Mike" <kswayze@bellsouth.net>
- Re: LT-1 Heads
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: LT-1 Heads
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: LT-1 Heads
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: LT-1 Heads
- From: "Chris Bennight" <Christopher_Bennight@baylor.edu>
- Re: CSH, HQ closin for a few days
- From: "Programmer" <nwester@eidnet.org>
- Re: LT-1 Heads
- From: Len Sabatine <sabatine@epix.net>
- Re: LT-1 Heads
- Re: scan toolz (Diacom can KMA!)
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: LT-1 Heads
- From: "Chris Bennight" <Christopher_Bennight@baylor.edu>
- Carchat and scan tools.
- From: Mike Rolica <97005620@lambton.on.ca>
- Re: LT-1 Heads
- From: Len Sabatine <sabatine@epix.net>
- Re: LT-1 Heads
- From: Len Sabatine <sabatine@epix.net>
- Re: Prom Burner
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Prom Burner & EEPROM's
- From: "Mike" <kswayze@bellsouth.net>
- Re: Carchat and scan tools.
- From: Rob Berg <rgberg@srv.net>
- AUJP Cold startup
- From: Squash <realsquash@yahoo.com>
- RE: carbytes and carchat
- From: "Scott Feaver" <scott@j-body.com>
- Re: LT-1 Heads
- RE: Prom Burner & EEPROM's
- From: Mika.Helander@softbit.fi
- Re: Prom Burner & EEPROM's
- From: Ludis Langens <ludis@cruzers.com>
- Re: Macintosh Scantool Software...
- From: Ludis Langens <ludis@cruzers.com>
- Re: Prom Burner & EEPROM's
- From: "Mike" <kswayze@bellsouth.net>
- Re: Prom Burner & EEPROM's
- Re: Carchat and scan tools.
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: LT-1 Heads
- From: "Chris Bennight" <Christopher_Bennight@baylor.edu>
- Re: Prom Burner & EEPROM's
- From: "Swayze" <kswayze@bellsouth.net>
- Beretta PROM use...
- From: frels@rosharon.camco.slb.com (Mike Frels)
- Re: LT-1 Heads
- Re: AUJP Cold startup
- From: "Programmer" <nwester@eidnet.org>
- Re: Beretta PROM use...
- From: romans@starstream.net (Romans, Mark)
- Re: LT-1 Heads
- From: Len Sabatine <sabatine@epix.net>
- Bruce's e-addr at VA Hosp?
- From: Garfield Willis <garwillis@msn.com>
- quick EFI harness question
- From: Vinnie Moscaritolo <vinnie@vmeng.com>
- Re: Prom Burner & EEPROM's
- From: Bob Valentine <bob@tecmark.com>
- Re: quick EFI harness question
- From: Garfield Willis <garwillis@msn.com>
- Re: quick EFI harness question
- From: Len Sabatine <sabatine@epix.net>
- Emulator
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: DFI and Haltech
- Re: Beretta PROM use...
- Re: quick EFI harness question
- Re: quick EFI harness question
- 4l60e or 4l80e ecm?
- From: "Mike" <itsmike@lvcm.com>
- Re: DFI and Haltech
- Re: 4l60e or 4l80e ecm?
- From: Shannen Durphey <shannen@grolen.com>
- Re: 4l60e or 4l80e ecm?
- From: Peter Gargano <peter@techedge.com.au>
- Re: 4l60e or 4l80e ecm?
- From: steve ravet <sravet@arm.com>
- RE: 4l60e or 4l80e ecm?
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- Re: BCC help
- Re: BCC help
- From: Shannen Durphey <shannen@grolen.com>
- Re: 4l60e or 4l80e ecm?
- From: Len Sabatine <sabatine@epix.net>
- RE: 4l60e or 4l80e ecm?
- From: "Peter D. Hipson" <mail@darkstar.mv.com>
- Re: 4l60e or 4l80e ecm?
- From: "Programmer" <nwester@eidnet.org>
- Re: 4l60e or 4l80e ecm?
- From: Len Sabatine <sabatine@epix.net>
- Re: quick EFI harness question
- From: Len Sabatine <sabatine@epix.net>
- Re: 4l60e or 4l80e ecm?
- From: "Mike" <itsmike@lvcm.com>
- RE: BCC help
- From: Carl Summers <InTech@writeme.com>
- Dumb ALDL Question No. 432
- From: Scott Lundahl <scott@lumenetics.com>
- Re: Dumb ALDL Question No. 432
- From: "Dave Zug." <dzug@delanet.com>
- Re: Dumb ALDL Question No. 432
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Dumb ALDL Question No. 432
- From: Peter Gargano <peter@techedge.com.au>
- Re: Dumb ALDL Question No. 432
- From: Andrew Mattei <amattei@mindspring.com>
- Re: Dumb ALDL Question No. 432
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Dumb ALDL Question No. 432
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Dumb ALDL Question No. 432
- From: Andrew Mattei <amattei@mindspring.com>
- Re: Dumb ALDL Question No. 432
- From: steve ravet <sravet@arm.com>
- 7749 data
- From: chetwagner@uswest.net
- Recommended reading...
- From: Shannen Durphey <shannen@grolen.com>
- Need some Help - 747 vs 288 PCM and Need 4.3 CPI Parts/Diagram
- Re: Dumb ALDL Question No. 432
- From: "Mike" <kswayze@bellsouth.net>
- Parts for Sale AND question on calibrators
- From: "Kurek, Larry" <lkurek@anl.gov>
- Re: 4l60e or 4l80e ecm?
- From: Len Sabatine <sabatine@epix.net>
- use of MAP in FI calcs
- RE: use of MAP in FI calcs
- From: Carl Summers <InTech@writeme.com>
- Re: Need some Help - 747 vs 288 PCM and Need 4.3 CPI Parts/Diagram
- From: Shannen Durphey <shannen@grolen.com>
- Re: Promedit help
- Re: use of MAP in FI calcs
- From: "Dave Zug" <dzug@delanet.com>
- Bin Collection
- From: Jason Weir <jweir@nc.rr.com>
- Re: use of MAP in FI calcs
- From: "Dave Zug" <dzug@delanet.com>
- Re: Promedit help
- From: "Dave Zug" <dzug@delanet.com>
- Re: Bin Collection
- From: Shannen Durphey <shannen@grolen.com>
- Re: Promedit help
- From: Shannen Durphey <shannen@grolen.com>
- Re: Promedit help
- RE: use of MAP in FI calcs
- From: Len Sabatine <sabatine@epix.net>
- Re: Promedit help
- From: Len Sabatine <sabatine@epix.net>
- Re: Promedit help
- From: rr <RRauscher@nni.com>
- Re: use of MAP in FI calcs
- From: Len Sabatine <sabatine@epix.net>
- Re: use of MAP in FI calcs
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: Parts for Sale AND question on calibrators
- From: Dale Klein <daklein@netzero.net>
- acceleration stumble
- From: chetwagner@uswest.net
- Re: Promedit help
- From: "Mike" <kswayze@bellsouth.net>
- Introduction and 2 questions
- From: "Mark Grave" <fatass@abacom.com>
- Re: Promedit help
- Re: scope - was Dumb ALDL Question No. 432
- Re: Dumb ALDL Question No. 432
- From: "black maj" <blackmin@hotmail.com>
- Re: Parts for Sale AND question on calibrators
- From: Shannen Durphey <shannen@grolen.com>
- Re: Introduction and 2 questions
- From: Shannen Durphey <shannen@grolen.com>
- Getting started
- From: Scott Pearson <camarors_ss@yahoo.com>
- Re: Prom Burner & EEPROM's
- From: Ludis Langens <ludis@cruzers.com>
- Re: Introduction and 2 questions
- From: Ludis Langens <ludis@cruzers.com>
- Re: use of MAP in FI calcs
- From: Ludis Langens <ludis@cruzers.com>
- Re: Need some Help - 747 vs 288 PCM and Need 4.3 CPI Parts/Diagram
- From: Ludis Langens <ludis@cruzers.com>
- Optoisolated ALDL Interface
- From: Ludis Langens <ludis@cruzers.com>
- Re: acceleration stumble
- Re: Prom Burner & EEPROM's
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Parts for Sale AND question on calibrators
- From: Len Sabatine <sabatine@epix.net>
- Re: Use of MAP in FI calcs
- Re: Use of MAP in FI calcs
- From: Garfield Willis <garwillis@msn.com>
- Re: Getting started
- From: steve ravet <sravet@arm.com>
- Re: Introduction and 2 questions
- From: "Mark Grave" <chevy89@abacom.com>
- Re: Introduction and 2 questions
- From: "Mark Grave" <chevy89@abacom.com>
- Re: Use of MAP in FI calcs
- From: Len Sabatine <sabatine@epix.net>
- ECM Calibrators - FTP
- From: "Kurek, Larry" <lkurek@anl.gov>
- Re: Introduction and 2 questions
- From: "Bruce Plecan" <nacelp@bright.net>
- CSH near reopening
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: CSH near reopening
- From: "Swayze" <kswayze@bellsouth.net>
- map sensor id
- From: mswayze@truswood.com (Mike Swayze)
- Re: CSH near reopening
- From: David Cooley <n5xmt@triad.rr.com>
- Re: CSH near reopening
- From: Garfield Willis <garwillis@msn.com>
- RE: Calibrators
- From: "Kurek, Larry" <lkurek@anl.gov>
- Re: CSH near reopening
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: CSH near reopening
- From: Pat Ford <pford@qnx.com>
- Re: map sensor id
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: CSH near reopening
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Use of MAP in FI calcs
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Use of MAP in FI calcs
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Use of MAP in FI calcs
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: acceleration stumble
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Calibrators
- From: Len Sabatine <sabatine@epix.net>
- Re: map sensor id
- From: "Swayze" <kswayze@bellsouth.net>
- Re: map sensor id
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Calibrators - DRACS- whatever
- Re: CSH near reopening
- From: "Programmer" <nwester@eidnet.org>
- High Order of the CSH wearers
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: use of MAP in FI calcs
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Calibrators - DRACS- whatever
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Introduction and 2 questions
- From: Shannen Durphey <shannen@grolen.com>
- Re: Introduction and 2 questions
- From: Ludis Langens <ludis@cruzers.com>
- Re: Use of MAP in FI calcs
- From: Ludis Langens <ludis@cruzers.com>
- Re: Calibrators - DRACS- whatever
- From: Shannen Durphey <shannen@grolen.com>
- Re: Introduction and 2 questions
- From: steve ravet <sravet@arm.com>
- Re: acceleration stumble
- From: chetwagner@uswest.net
- Re: Introduction and 2 questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Calibrators - DRACS- whatever
- From: Peter Gargano <peter@techedge.com.au>
- Re: Calibrators - DRACS- whatever
- From: "EK" <sk8er@netmost.com>
- Re: Introduction and 2 questions
- From: steve ravet <sravet@arm.com>
- Re: acceleration stumble
- From: "Bruce Plecan" <nacelp@bright.net>
- CTS dampening
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Calibrators - DRACS- whatever
- From: Shannen Durphey <shannen@grolen.com>
- Re: 749 data
- From: Bill Shaw <bshaw@connix.com>
- hex editors & 8051 Qs
- From: Bill Shaw <bshaw@connix.com>
- Re: scope - was Dumb ALDL Question No. 432
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: use of MAP in FI calcs
- From: bearbvd@cmn.net (Greg Hermann)
- Re: CTS dampening
- From: "Dave Zug" <dzug@delanet.com>
- Re: CTS dampening
- From: "Bruce Plecan" <nacelp@bright.net>
- GN injectors
- From: Scott & Jennifer Peitzsch <jlg-sep@mediaone.net>
- Re: CTS dampening
- From: "Dave Zug" <dzug@delanet.com>
- Re: GN injectors
- From: "Dave Zug" <dzug@delanet.com>
- Re: GN injectors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: GN injectors
- From: "Dave Zug" <dzug@delanet.com>
- Re: GN injectors
- From: "Dave Zug" <dzug@delanet.com>
- HEX TO DECIMAL
- From: "Daniel Collins" <bossute@one.net.au>
- 747 bins ?
- From: Mike Dillon <mdill@lsil.com>
- Re: 747 bins ?
- From: "Programmer" <nwester@eidnet.org>
- Re: Beretta PROM use...
- From: Scott Pearson <camarors_ss@yahoo.com>
- Re: Recommended reading...
- From: Scott Pearson <camarors_ss@yahoo.com>
- Re: Programming questions
- Re: GN injectors
- From: Scott & Jennifer Peitzsch <jlg-sep@mediaone.net>
- GN injectors
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: Recommended reading...
- From: Shannen Durphey <shannen@grolen.com>
- Re: Beretta PROM use...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: GN injectors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Use of MAP in FI calcs
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Bin Collection
- From: Jason Weir <jweir@nc.rr.com>
- Re: HEX TO DECIMAL
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Use of MAP in FI calcs
- From: Len Sabatine <sabatine@epix.net>
- Re: Use of MAP in FI calcs
- From: Len Sabatine <sabatine@epix.net>
- Re: High Order of the CSH wearers
- From: Len Sabatine <sabatine@epix.net>
- Re: GN injectors
- From: bearbvd@cmn.net (Greg Hermann)
- Corvette Stock Bins
- From: "Craig Marcho" <marcho@flash.net>
- Re: HEX TO DECIMAL
- From: steve ravet <sravet@arm.com>
- Re: Recommended reading...
- From: steve ravet <sravet@arm.com>
- AMRW bin application
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: Sorta GN injectors
- From: Shannen Durphey <shannen@grolen.com>
- Re: HEX TO DECIMAL
- From: "Dave Zug" <dzug@delanet.com>
- Re: Beretta PROM use...
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- my speedo is happy now
- Re: hex editors & 8051 Qs
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: HEX TO DECIMAL
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: HEX TO DECIMAL
- From: Peter Gargano <peter@techedge.com.au>
- Re: GN injectors
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: HEX TO DECIMAL
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: HEX TO DECIMAL
- From: Peter Gargano <peter@techedge.com.au>
- AMRW bin application
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: Recommended reading...
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: MSX info: was Recommended reading...
- From: Shannen Durphey <shannen@grolen.com>
- Re: Beretta PROM use...
- From: "Bruce Plecan" <nacelp@bright.net>
- 3300 dis = 3800 dis?
- From: david garnier <garnierd@uwm.edu>
- Re: GMECM Digest V2 #484
- From: Mike Dillon <mdill@lsil.com>
- Re: Beretta PROM use...
- From: Shannen Durphey <shannen@grolen.com>
- N.O.S. Relay
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: N.O.S. Relay
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Beretta PROM use...
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: GMECM Digest V2 #484
- From: "Programmer" <nwester@eidnet.org>
- Re: Beretta PROM use...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: GMECM Digest V2 #484
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: HEX TO DECIMAL
- From: "Daniel Collins" <bossute@one.net.au>
- DIS+inj_timing...
- From: Shannen Durphey <shannen@grolen.com>
- Re: HEX TO DECIMAL
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 7749 data
- From: "Jeffery Green" <jlg@bellsouth.net>
- Re: N.O.S. Relay
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: 3300 dis = 3800 dis?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: my speedo is happy now
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Re: HEX TO DECIMAL
- From: "Edward J. Malkiewicz" <krazyed@worldnet.att.net>
- Re: AMRW bin application
- From: Ludis Langens <ludis@cruzers.com>
- Re: HEX TO DECIMAL
- From: Ludis Langens <ludis@cruzers.com>
- Re: DIS+inj_timing...
- From: Ludis Langens <ludis@cruzers.com>
- Re: hex editors & 8051 Qs
- From: Ludis Langens <ludis@cruzers.com>
- Re: HEX TO DECIMAL
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Beretta PROM use...
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: HEX TO DECIMAL
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: Beretta PROM use...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: HEX TO DECIMAL
- From: "alexpeper" <alexpeper@email.msn.com>
- DIS vs Dist. -- was Re: Beretta PROM use...
- From: Peter Gargano <peter@techedge.com.au>
- Re: DIS vs Dist. -- was Re: Beretta PROM use...
- From: "Bruce Plecan" <nacelp@bright.net>
- Tuning - Fuel vs. Spark, questions
- From: Bob Valentine <bob@tecmark.com>
- Re: DIS vs Dist. -- was Re: Beretta PROM use...
- From: Peter Gargano <peter@techedge.com.au>
- Re: Tuning - Fuel vs. Spark, questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIS vs Dist. -- was Re: Beretta PROM use...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: hex editors & 8051 Qs
- From: Ken Kelly <PCMdoc@surfree.com>
- why the big difference in ECUs?
- Re: HEX TO DECIMAL
- From: "Dave Zug" <dzug@delanet.com>
- RE: why the big difference in ECUs?
- From: Carl Summers <InTech@writeme.com>
- Re: why the big difference in ECUs?
- From: romans@starstream.net (Romans, Mark)
- Injectors
- From: "Dan Townsend" <xybertron@cox-internet.com>
- ECM Stuff Wanted / Trade?
- From: "Dave Zug" <dzug@delanet.com>
- Re: hex editors & 8051 Qs
- From: "Programmer" <nwester@eidnet.org>
- Re: why the big difference in ECUs?
- From: "Programmer" <nwester@eidnet.org>
- Re: hex editors & 8051 Qs
- CSH Road Trip
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Injectors
- From: "Bruce Plecan" <nacelp@bright.net>
- manual replacing auto tranny
- From: "Washburn" <lpwcruzr@netzero.net>
- Re: manual replacing auto tranny
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: manual replacing auto tranny
- From: Len Sabatine <sabatine@epix.net>
- Re: Beretta PROM use...
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: 4l60e or 4l80e ecm?
- From: "Mike" <itsmike@lvcm.com>
- Re: hex editors & 8051 Qs
- From: "Programmer" <nwester@eidnet.org>
- Re: acceleration stumble
- From: chetwagner@uswest.net
- Re: acceleration stumble
- From: Squash <realsquash@yahoo.com>
- Re: DIS+inj_timing...
- From: Shannen Durphey <shannen@grolen.com>
- RE: HEX TO DECIMAL
- From: Reid Bishop <rbish@ibm.net>
- Re: HEX TO DECIMAL
- From: "TK" <terryk@foothill.net>
- RE: acceleration stumble
- From: Carl Summers <InTech@writeme.com>
- More tuning questions- 4.3 TBI
- From: Reid Bishop <rbish@ibm.net>
- RE: More tuning questions- 4.3 TBI
- From: Carl Summers <InTech@writeme.com>
- Re: More tuning questions- 4.3 TBI
- From: Bob Valentine <bob@tecmark.com>
- TCC lock/unlock tuning
- From: Bob Valentine <bob@tecmark.com>
- Re: TCC lock/unlock tuning
- From: Roger Heflin <rah@horizon.hit.net>
- Pump Shot table for 730
- From: timsiford@hushmail.com
- GM's move to CalPaks
- From: timsiford@hushmail.com
- Baud rates of ECMs
- From: timsiford@hushmail.com
- Re: Baud rates of ECMs
- From: David Cooley <n5xmt@triad.rr.com>
- Re: GM's move to CalPaks
- From: steve ravet <sravet@arm.com>
- Re: GM's move to CalPaks
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: GM's move to CalPaks
- From: "thom358" <thom358@netzero.net>
- EFI stuff for sale
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: GM's move to CalPaks
- From: Ludis Langens <ludis@cruzers.com>
- Re: GM's move to CalPaks
- From: Ludis Langens <ludis@cruzers.com>
- Re: GM's move to CalPaks
- From: steve ravet <sravet@arm.com>
- Re: GM's move to CalPaks
- From: Squash <realsquash@yahoo.com>
- Re: GM's move to CalPaks
- From: David Cooley <n5xmt@triad.rr.com>
- Re: GM's move to CalPaks
- From: steve ravet <sravet@arm.com>
- TBI injector pulse width range
- From: Scott Lundahl <scott@lumenetics.com>
- Re: GM's move to CalPaks
- From: steve ravet <sravet@arm.com>
- 2" butterflies on crossfire
- From: "Kevin R" <KEReyn@gte.net>
- Re: GM's move to CalPaks
- From: David Cooley <n5xmt@triad.rr.com>
- Re: 2" butterflies on crossfire
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: GM's move to CalPaks
- RE: GM's move to CalPaks
- From: "Jim Sloan" <leroy@sunflower.com>
- Re: TBI injector pulse width range
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: GM's move to CalPaks
- From: "Walter Sherwin" <wsherwin@home.com>
- GM 2.8L V6 ALDL
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: GM 2.8L V6 ALDL
- From: Peter Gargano <peter@techedge.com.au>
- RE: GM's move to CalPaks
- From: Carl Summers <InTech@writeme.com>
- Re: GM's move to CalPaks
- From: Shannen Durphey <shannen@grolen.com>
- Re: GM's move to CalPaks
- From: Shannen Durphey <shannen@grolen.com>
- Re: GM 2.8L V6 ALDL
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: GM 2.8L V6 ALDL
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: GM's move to CalPaks
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: GM's move to CalPaks
- From: David Cooley <n5xmt@triad.rr.com>
- Re: GM's move to CalPaks
- New bin and Qs...
- From: Bill Shaw <bshaw@connix.com>
- Re: GM's move to CalPaks
- From: "Walter Sherwin" <wsherwin@home.com>
- what a bad '870 looks like!
- From: "Craig Marcho" <marcho@flash.net>
- Re: GM's move to CalPaks
- From: "Programmer" <nwester@eidnet.org>
- Another strange injector question
- From: Scott Lundahl <scott@lumenetics.com>
- Re: what a bad '870 looks like!
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: Another strange injector question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: what a bad '870 looks like!
- From: "Bruce Plecan" <nacelp@bright.net>
- SS10 Help
- From: "Dr.Acacio" <aortiz@w3ti.com.br>
- Re: what a bad '870 looks like!
- From: Len Sabatine <sabatine@epix.net>
- Diagnostics
- From: Peter Gargano <peter@techedge.com.au>
- Re: GM 2.8L V6 ALDL
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- 29C256 Flash works great!
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: SS10 Help
- Re: Another strange injector question
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: GM 2.8L V6 ALDL
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: SS10 Help
- From: Shannen Durphey <shannen@grolen.com>
- Re: SS10 Help
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: GM 2.8L V6 ALDL
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: GM 2.8L V6 ALDL
- From: Peter Gargano <peter@techedge.com.au>
- Impala SS PCM
- From: Bill Shaw <bshaw@connix.com>
- Re: GM 2.8L V6 ALDL
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: Impala SS PCM
- Re: Impala SS PCM
- From: Len Sabatine <sabatine@epix.net>
- Re: GM 2.8L V6 ALDL
- From: Scot Sealander <Sealand@clarityconnect.com>
- RE: Impala SS PCM
- From: "Rodney Fulk" <elixir@pathwaynet.com>
- Re: GM 2.8L V6 ALDL
- From: "s. douglas taylor" <x5gb7uk9@wna-linknet.com>
- Re: Calibrators
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: knock sensor installation
- From: "s. douglas taylor" <x5gb7uk9@wna-linknet.com>
- Re: SS10 Help
- From: "Programmer" <nwester@eidnet.org>
- Re: CTS dampening
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: CTS dampening
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: knock sensor installation
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: knock sensor installation
- From: steve ravet <sravet@arm.com>
- Re: knock sensor installation
- From: Shannen Durphey <shannen@grolen.com>
- Re: GM 2.8L V6 ALDL - Carbytes
- From: Dale Klein <daklein@netzero.net>
- Re: 29C256 Flash works great!
- Re: Programming questions
- Re: 29C256 Flash works great!
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: what a bad '870 looks like!
- From: Ludis Langens <ludis@cruzers.com>
- Re: GM's move to CalPaks
- From: Ludis Langens <ludis@cruzers.com>
- 68 Pontiac Firebird Downunder
- From: "Daniel Collins" <bossute@one.net.au>
- Re: Diagnostics
- From: "Swayze" <kswayze@bellsouth.net>
- RE: 68 Pontiac Firebird Downunder
- From: Mika.Helander@softbit.fi
- Re: GM's move to CalPaks
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: GM's move to CalPaks
- From: David Cooley <n5xmt@triad.rr.com>
- Re: GM 2.8L V6 ALDL
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: 68 Pontiac Firebird Downunder
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: GM 2.8L V6 ALDL
- From: Barry Tisdale <btisdale@cybersol.com>
- Catalytic Converters
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: knock sensor installation
- From: "Programmer" <nwester@eidnet.org>
- Re: 29C256 Flash works great!
- From: "Programmer" <nwester@eidnet.org>
- Re: Programming questions
- From: romans@starstream.net (Romans, Mark)
- "OLDPA3" question
- From: "Niinikoski, Juha" <Juha.Niinikoski@mikrolog.fi>
- Re: SS10 Help
- From: Len Sabatine <sabatine@epix.net>
- Re: 29C256 Flash works great!
- From: Squash <realsquash@yahoo.com>
- Re: 29C256 Flash works great!
- From: timsiford@hushmail.com
- Re: Diagnostics
- From: Peter Gargano <peter@techedge.com.au>
- Re: GM 2.8L V6 ALDL - Carbytes
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: Diagnostics
- From: "Swayze" <kswayze@bellsouth.net>
- Re: GM 2.8L V6 ALDL
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: GM 2.8L V6 ALDL
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: Diagnostics
- From: Peter Gargano <peter@techedge.com.au>
- Re: GM's move to CalPaks
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: "OLDPA3" question
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Impala SS PCM
- From: Louis Baiani <neptilou@attcanada.ca>
- Serial 160 baud ALDL -- was Re: Impala SS PCM
- From: Peter Gargano <peter@techedge.com.au>
- Re: GM's move to CalPaks
- From: Bill Shaw <bshaw@connix.com>
- Re: GM 2.8L V6 ALDL
- From: Bill Shaw <bshaw@connix.com>
- Re: Diagnostics
- From: Bill Shaw <bshaw@connix.com>
- Flashing
- From: Peter Gargano <peter@techedge.com.au>
- Re: knock sensor installation
- From: "s. douglas taylor" <x5gb7uk9@wna-linknet.com>
- Re: Flashing
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Flashing
- From: Peter Gargano <peter@techedge.com.au>
- Re: GM 2.8L V6 ALDL
- From: Dale Klein <daklein@netzero.net>
- TBI with TPI ecm???
- From: "Kevin R" <KEReyn@gte.net>
- Re: "OLDPA3" question
- From: "Jeff M" <tystorm@email.msn.com>
- Re: GM 2.8L V6 ALDL
- From: Dig <turbodig@yahoo.com>
- Bin Library
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 29C256 Flash works great!
- From: Squash <realsquash@yahoo.com>
- EFI POW WOW
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TBI with TPI ecm???
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 29C256 Flash works great!
- From: Peter Gargano <peter@techedge.com.au>
- Re: GM 2.8L V6 ALDL
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: GM 2.8L V6 ALDL
- From: "Shawn R. Lin" <slin01@mail.orion.org>
- Re: TBI with TPI ecm???
- From: "Kevin R" <KEReyn@gte.net>
- Re: TBI with TPI ecm???
- From: Shannen Durphey <shannen@grolen.com>
- EGR tube/exhaust manifold boss question
- From: "TK" <terryk@foothill.net>
- Re: EGR tube/exhaust manifold boss question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TBI throttle bore restriction
- Re: TBI with TPI ecm???
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TBI throttle bore restriction
- From: "Bruce Plecan" <nacelp@bright.net>
- WTB: Used EPROM burner and eraser
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: TBI throttle bore restriction
- From: Len Sabatine <sabatine@epix.net>
- Re: TBI with TPI ecm???
- From: Ludis Langens <ludis@cruzers.com>
- Re: GM's move to CalPaks
- From: Ludis Langens <ludis@cruzers.com>
- egr algorithm
- From: "Daniel Collins" <bossute@one.net.au>
- Re: egr algorithm
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TBI with TPI ecm???
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EGR tube/exhaust manifold boss question
- From: "TK" <terryk@foothill.net>
- Re:TBI with TPI ecm???
- From: Bill Shaw <bshaw@connix.com>
- Re: EGR tube/exhaust manifold boss question
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- Re: TBI with TPI ecm???
- From: Shannen Durphey <shannen@grolen.com>
- Re: Used EPROM burner and eraser
- From: "mike" <97005620@lambton.on.ca>
- Re: TBI with TPI ecm???
- From: "Kevin R" <KEReyn@gte.net>
- Re: Main spark bias
- Re: Main spark bias
- From: Shannen Durphey <shannen@grolen.com>
- Re: TBI with TPI ecm???
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Used EPROM burner and eraser
- Re: TBI with TPI ecm???
- From: "Kevin R" <KEReyn@gte.net>
- Re: Bin Library
- From: "Programmer" <nwester@eidnet.org>
- Connector pin spacing
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- 2 730 Memcals for sale
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Driver Boards
- From: Garfield Willis <garwillis@msn.com>
- Re: Driver Boards
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: 4.3L Throttle body and ECMs
- Re: Tuning 7747
- Re: Driver Boards
- From: Len Sabatine <sabatine@epix.net>
- Re: Tuning 7747
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Driver Boards
- From: Garfield Willis <garwillis@msn.com>
- Re: 4.3L Throttle body and ECMs
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Tuning 7747
- From: Carl Summers <InTech@writeme.com>
- Re: 2 730 Memcals for sale
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Used EPROM burner and eraser
- From: "Dan Townsend" <xybertron@cox-internet.com>
- RE: Bin Library
- From: "Gorden Jennings" <gjennings@ixpres.com>
- Re: Used EPROM burner and eraser
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Tuning 7747
- Re: Tuning 7747
- From: romans@starstream.net (Romans, Mark)
- Lincoln - GM EFI Conversion
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Lincoln - GM EFI Conversion
- From: Shannen Durphey <shannen@grolen.com>
- ALDL timing (was GM 2.8L V6 ALDL)
- From: "Paul Blackmore" <paul_blackmore@xtra.co.nz>
- Re: Tuning 7747
- From: Ludis Langens <ludis@cruzers.com>
- RE: 2 730 Memcals for sale
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Used EPROM burner and eraser
- aldl stuff
- From: mswayze@truswood.com (Mike Swayze)
- Re: Used EPROM burner and eraser
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Tuning 7747
- From: "Kevin R" <KEReyn@gte.net>
- Re: Tuning 7747
- From: "Kevin R" <KEReyn@gte.net>
- Re: aldl stuff
- From: Peter Gargano <peter@techedge.com.au>
- Re: aldl stuff
- From: David Cooley <n5xmt@triad.rr.com>
- Re: aldl stuff
- From: "Swayze" <kswayze@bellsouth.net>
- Re: 2 730 Memcals for sale
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: aldl stuff
- From: "Swayze" <kswayze@bellsouth.net>
- Re: aldl stuff
- From: Peter Gargano <peter@techedge.com.au>
- Re: aldl stuff
- From: "Swayze" <kswayze@bellsouth.net>
- Re: aldl stuff
- From: David Cooley <n5xmt@triad.rr.com>
- Re: EFI POW WOW
- From: Bob Valentine <bob@tecmark.com>
- Re: aldl stuff
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: aldl stuff
- From: Peter Gargano <peter@techedge.com.au>
- Re: EFI POW WOW
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Lincoln - GM EFI Conversion
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: 4.3L Throttle body and ECMs
- From: "Walter Sherwin" <wsherwin@home.com>
- Injector & Coil Driver Board Group Buy
- From: Bill Shaw <bshaw@connix.com>
- Re: 4.3L Throttle body and ECMs
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: EFI POW WOW
- From: Shannen Durphey <shannen@grolen.com>
- Traction Control
- From: Bill Shaw <bshaw@connix.com>
- Re: aldl stuff
- From: Louis Baiani <neptilou@attcanada.ca>
- Re: aldl stuff
- From: Louis Baiani <neptilou@attcanada.ca>
- Re: Traction Control
- From: Len Sabatine <sabatine@epix.net>
- MAP sensor location
- From: Scott Lundahl <scott@lumenetics.com>
- Re: aldl stuff
- From: Tom Sharpe <twsharpe@mtco.com>
- RFD Keeper Thread, Anyone?
- From: Garfield Willis <garwillis@msn.com>
- Re: MAP sensor location
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: aldl stuff
- From: Peter Gargano <peter@techedge.com.au>
- Re: MAP sensor location
- From: Len Sabatine <sabatine@epix.net>
- Re: TBI with TPI ecm???
- From: Ludis Langens <ludis@cruzers.com>
- Re: Tuning 7747
- From: Ludis Langens <ludis@cruzers.com>
- Re: Tuning 7747
- From: Ludis Langens <ludis@cruzers.com>
- EDI Distributor
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: TBI with TPI ecm???
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Driver Boards (Cherry Driver Load Resistor)
- From: David Rhoads II <rhoads@adi.com>
- Re: TBI with TPI ecm???
- From: Ludis Langens <ludis@cruzers.com>
- RE: EFI POW WOW
- From: "Miker Rolica" <97005620@lambton.on.ca>
- Re: Used EPROM burner and eraser
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Introduction
- From: "Brent" <WildKat@paonline.com>
- Re: Introduction
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EDI Distributor
- From: Shannen Durphey <shannen@grolen.com>
- Re: EFI POW WOW
- From: Shannen Durphey <shannen@grolen.com>
- Re: Introduction
- From: Shannen Durphey <shannen@grolen.com>
- Re: added to Introduction
- From: Shannen Durphey <shannen@grolen.com>
- Re: EFI POW WOW
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Traction Control
- From: Bill Shaw <bshaw@connix.com>
- Re: Introduction
- From: Peter Gargano <peter@techedge.com.au>
- Re: added to Introduction
- From: "Brent" <WildKat@paonline.com>
- Re: Introduction
- From: "Brent" <WildKat@paonline.com>
- Re: EFI POW WOW
- From: Scott Pearson <camarors_ss@yahoo.com>
- Re: EFI POW WOW
- From: Shannen Durphey <shannen@grolen.com>
- Re: Introduction
- From: Ludis Langens <ludis@cruzers.com>
- Re: EFI POW WOW
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EDI Distributor
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: Traction Control
- From: Len Sabatine <sabatine@epix.net>
- Re: EDI Distributor
- From: Shannen Durphey <shannen@grolen.com>
- CSH, GN Update
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EFI POW WOW
- From: "Jeffrey Scott" <jws6367@lycos.com>
- Promgrammer an JRE
- From: Shannen Durphey <shannen@grolen.com>
- Re: Promgrammer and JRE pt 2
- From: Shannen Durphey <shannen@grolen.com>
- Re: EFI POW WOW
- From: "TK" <terryk@foothill.net>
- Re: EFI POW WOW
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Promgrammer an JRE
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EFI POW WOW
- From: romans@starstream.net (Romans, Mark)
- Fw: Bin File
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EFI POW WOW
- From: "Bruce Plecan" <nacelp@bright.net>
- Date: Wed, 20 Sep 2000 22:11:43 -0400
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- Re: EFI POW WOW
- From: "Bruce Plecan" <nacelp@bright.net>
- CSH, GN Update
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: EFI POW WOW
- From: "TK" <terryk@foothill.net>
- Re: EFI POW WOW
- From: Scott Pearson <camarors_ss@yahoo.com>
- Re: EFI POW WOW
- From: "Programmer" <nwester@eidnet.org>
- Re: CSH, GN Update
- From: bearbvd@cmn.net (Greg Hermann)
- eprom size?
- From: "Daniel Collins" <bossute@one.net.au>
- Re: EDI Distributor
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: EFI POW WOW
- From: Steven Ciciora <ciciora@Ciciora.com>
- Dave Hempsteads address needed
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: eprom size?
- From: steve ravet <sravet@arm.com>
- Re: EFI POW WOW
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MAP sensor location
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: MAP sensor location
- From: Len Sabatine <sabatine@epix.net>
- Re: MAP sensor location
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: MAP sensor location
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Introduction and 2 questions
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: Introduction and 2 questions
- From: "Programmer" <nwester@eidnet.org>
- Re: Introduction and 2 questions
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Promgrammer an JRE
- From: "Programmer" <nwester@eidnet.org>
- Re: Introduction and 2 questions
- From: "Programmer" <nwester@eidnet.org>
- would like to see a modded spark table.
- Re: would like to see a modded spark table.
- From: "Bruce Plecan" <nacelp@bright.net>
- MAF tables have a max of 255
- From: timsiford@hushmail.com
- Re: Promgrammer an JRE
- From: "Jeffrey Scott" <jws6367@lycos.com>
- Re: Promgrammer an JRE
- From: "Jeffrey Scott" <jws6367@lycos.com>
- Re: EFI POW WOW
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: CSH, GN Update
- From: Garfield Willis <garwillis@msn.com>
- Re: EFI POW WOW
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: eprom size?
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: MAP sensor location
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: MAP sensor location
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: CSH, GN Update
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Traction Control
- From: Bill Shaw <bshaw@connix.com>
- Re: Traction Control
- From: "Bruce Plecan" <nacelp@bright.net>
- Fw: LT-1
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: aldl stuff
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: 7747 tuning again
- Re: 7747 tuning again
- From: Ludis Langens <ludis@cruzers.com>
- Re: aldl stuff
- From: "black maj" <blackmin@hotmail.com>
- Re: 7747 tuning again
- Re: 7747 tuning again
- Re: 7747 tuning again
- From: rr <RRauscher@nni.com>
- Re: Fw: LT-1
- Re: MAF tables have a max of 255
- Re: 7747 tuning again
- From: Shannen Durphey <shannen@grolen.com>
- Re: Promgrammer an JRE
- From: Shannen Durphey <shannen@grolen.com>
- Re: 7747 tuning again
- Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: timsiford@hushmail.com
- Re: 7747 tuning again
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Fw: LT-1
- From: Len Sabatine <sabatine@epix.net>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: romans@starstream.net (Romans, Mark)
- Re: Traction Control
- From: Len Sabatine <sabatine@epix.net>
- Re: 7747 tuning again
- From: rr <RRauscher@nni.com>
- Re: 7747 tuning again
- Re: Traction Control
- From: "Dave Zug" <dzug@delanet.com>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: timsiford@hushmail.com
- Re: 7747 tuning again
- Reading hex
- From: "Kevin R" <KEReyn@gte.net>
- Re: 7747 tuning again
- From: "NickG" <nikog@mediaone.net>
- Re: Reading hex
- From: Shannen Durphey <shannen@grolen.com>
- Re: 7747 tuning again
- From: Shannen Durphey <shannen@grolen.com>
- Re: 7747 tuning again
- From: Bob Valentine <bob@tecmark.com>
- Re: Reading hex
- From: "Kevin R" <KEReyn@gte.net>
- Re: Reading hex
- From: Shawn Lin <slin01@mail.orion.org>
- Re: aldl stuff
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- LTFC Values
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: EFI POW WOW-photos
- From: Scott Pearson <camarors_ss@yahoo.com>
- Re: Reading hex
- From: Shannen Durphey <shannen@grolen.com>
- Re: Reading hex
- From: "Daniel Collins" <bossute@one.net.au>
- Re: 7747 tuning again
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- Re: Traction Control
- From: Len Sabatine <sabatine@epix.net>
- Re: CSH, GN Update
- From: Garfield Willis <garwillis@msn.com>
- Re: Reading hex
- From: "Programmer" <nwester@eidnet.org>
- 7747 vs 8062
- From: Reid Bishop <rbish@ibm.net>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: romans@starstream.net (Romans, Mark)
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: timsiford@hushmail.com
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: timsiford@hushmail.com
- Re: 7747 tuning again
- From: rr <RRauscher@nni.com>
- Re: Introduction and 2 questions
- From: steve ravet <sravet@arm.com>
- Unswitched +5vdc in 730
- From: Squash <realsquash@yahoo.com>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Unswitched +5vdc in 730
- From: Ludis Langens <ludis@cruzers.com>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: romans@starstream.net (Romans, Mark)
- Off, worm to treasure:
- From: Shannen Durphey <shannen@grolen.com>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: romans@starstream.net (Romans, Mark)
- RE: Mopar / 6803
- From: "Geoff Allan" <ShelbyZ@home.com>
- Re: "OLDPA3" question
- From: Pat Ford <pford@qnx.com>
- Data tables for a software tool
- From: Ludis Langens <ludis@cruzers.com>
- RE: Part Throttle tuning for MAF (was MAF tables have a max of 25 5)
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Data tables for a software tool
- From: steve ravet <sravet@arm.com>
- ATTN: Gar or Bruce..exotic fuel AFR question.
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: "OLDPA3" question
- From: steve ravet <sravet@arm.com>
- Re: Gar or Bruce..exotic fuel AFR question.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Data tables for a software tool
- From: Ludis Langens <ludis@cruzers.com>
- Re: Data tables for a software tool
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: EFI POW WOW
- From: "Paul Bumann" <ramsport96@home.com>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Daniel Collins" <bossute@one.net.au>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Dave Zug" <dzug@delanet.com>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Miker Rolica" <97005620@lambton.on.ca>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Dave Zug" <dzug@delanet.com>
- Re: 7747 tuning again
- From: "Walter Sherwin" <wsherwin@home.com>
- BCC decodes
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: BCC decodes
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BCC decodes
- From: Shannen Durphey <shannen@grolen.com>
- Re: BCC decodes
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: BCC decodes
- From: Shannen Durphey <shannen@grolen.com>
- 747 wiring questions.
- From: "Kevin R" <KEReyn@gte.net>
- Re: BCC decodes
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: BCC decodes
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BCC decodes
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: BCC decodes
- From: Ludis Langens <ludis@cruzers.com>
- Re: BCC decodes
- From: Ludis Langens <ludis@cruzers.com>
- Re: BCC decodes
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Scan tool question
- Re: BCC decodes
- From: Shannen Durphey <shannen@grolen.com>
- 730 Spark Advance
- From: Bob Valentine <bob@tecmark.com>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- 749 question(s)
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 Spark Advance
- From: Squash <realsquash@yahoo.com>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- Re: Gar or Bruce..exotic fuel AFR question.
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: 747 wiring questions.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BCC decodes
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 747 wiring questions.
- Re: 730 Spark Advance
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Daniel Collins" <bossute@one.net.au>
- Re: Scan tool question
- From: steve ravet <sravet@arm.com>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: steve ravet <sravet@arm.com>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 747 wiring questions.
- From: Ludis Langens <ludis@cruzers.com>
- Re: 7747 tuning again
- From: rr <RRauscher@nni.com>
- Re: 7747 tuning again
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 749 question(s)
- Re: quickie tuning method
- Re: 730 Spark Advance
- From: Shannen Durphey <shannen@grolen.com>
- Re: 749 question(s)
- From: Dig <turbodig@yahoo.com>
- Re: 7747 tuning again
- From: rr <RRauscher@nni.com>
- Re: 749 question(s)
- Re: Gar or Bruce..exotic fuel AFR question.
- EFI Pow Wow
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Gar or Bruce..exotic fuel AFR question.
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: BCC decodes
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: 7747 tuning again
- From: "Kevin R" <KEReyn@gte.net>
- Re: 7747 tuning again
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Another Newbie Question, part II
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- RE: 7747 tuning again
- From: Reid Bishop <rbish@ibm.net>
- Re: 7747 tuning again
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Gar or Bruce..exotic fuel AFR question.
- From: "gene l. clifford" <genelc@idworld.net>
- Jet Performance scam?
- From: Reid Bishop <rbish@ibm.net>
- Re: Spark advance tuning made simple and quick?
- Re: Jet Performance scam?
- From: "TK" <terryk@foothill.net>
- Re: Jet Performance scam?
- From: Shannen Durphey <shannen@grolen.com>
- RE: 7747 tuning again
- From: Mika.Helander@softbit.fi
- Re: Data tables for a software tool
- From: Ludis Langens <ludis@cruzers.com>
- Re: 7747 tuning again
- From: Ludis Langens <ludis@cruzers.com>
- Re: BCC decodes
- From: Ludis Langens <ludis@cruzers.com>
- VSS was:Re: BCC decodes
- From: "Mike" <kswayze@bellsouth.net>
- Re: 7747 tuning again
- Programming 808
- From: "Daniel Collins" <bossute@one.net.au>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Daniel Collins" <bossute@one.net.au>
- Re: VSS was:Re: BCC decodes
- From: steve ravet <sravet@arm.com>
- Re: Programming 808
- From: steve ravet <sravet@arm.com>
- Re: Gar or Bruce..exotic fuel AFR question.
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- EFI Pow Wow... and 60+2 wheel pickup
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: VSS was:Re: BCC decodes
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Dave Zug." <dzug@delanet.com>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Programming 808
- From: "Bruce Plecan" <nacelp@bright.net>
- Communicating with a 730
- From: Mike Rolica <97005620@lambton.on.ca>
- 93 LT1 Firebird
- From: chetwagner@uswest.net
- Diacom Communication with a '7730
- From: "Matt Charazinski" <gtu88@hotmail.com>
- RE: 7747 tuning again
- From: Carl Summers <InTech@writeme.com>
- Re: Data tables for a software tool
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: 7747 tuning again
- From: rr <RRauscher@nni.com>
- Re: 93 LT1 Firebird
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 93 LT1 Firebird
- From: Len Sabatine <sabatine@epix.net>
- Re: Jet Performance scam?
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: 93 LT1 Firebird
- From: Roger Heflin <rah@horizon.hit.net>
- RE: 7747 tuning again
- From: Reid Bishop <rbish@ibm.net>
- Re: 7747 tuning again
- From: rr <RRauscher@nni.com>
- burner software improvements?
- From: Shannen Durphey <shannen@grolen.com>
- ALDL Stuff the ubiquitous connector
- From: "Mike" <kswayze@bellsouth.net>
- Re: Traction Control
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: timsiford@hushmail.com
- Re: burner software improvements?
- From: DC Smith <morepoweral@tetranet.net>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: timsiford@hushmail.com
- Re: Traction Control
- From: John_Calabrese@ENGELHARD.COM
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Dave Zug." <dzug@delanet.com>
- Re: Traction Control
- From: Shannen Durphey <shannen@grolen.com>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: timsiford@hushmail.com
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: "Dave Zug." <dzug@delanet.com>
- Re: Jet Performance scam?
- From: "Programmer" <nwester@eidnet.org>
- Re: Jet Performance scam?
- From: "Dave Zug." <dzug@delanet.com>
- Re: Jet Performance scam?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Jet Performance scam?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Jet Performance scam?
- From: "Dave Zug." <dzug@delanet.com>
- Bin Library
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Bin Library
- From: "Dave Zug." <dzug@delanet.com>
- Re: Bin Library
- From: timsiford@hushmail.com
- Re: Jet Performance scam?
- From: Len Sabatine <sabatine@epix.net>
- Re: Jet Performance scam?
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Bin Library
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Jet Performance scam?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Jet Performance scam?
- Re: Spark advance tuning made simple and quick?
- From: "Walter Sherwin" <wsherwin@home.com>
- In flight
- From: "Bruce Plecan" <nacelp@bright.net>
- '165, '730 address space
- From: "Dave Zug" <dzug@delanet.com>
- Re: Spark advance tuning made simple and quick?
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: Jet Performance scam?
- From: "Dave Zug" <dzug@delanet.com>
- Re: Spark advance tuning made simple and quick?
- From: "Dave Zug" <dzug@delanet.com>
- Re: In flight
- From: "Dave Zug" <dzug@delanet.com>
- Re: Programming 808
- From: "Daniel Collins" <bossute@one.net.au>
- GTech as a testing device
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Jet Performance scam and others
- From: "Jeff M" <tystorm@email.msn.com>
- Re: Spark advance tuning made simple and quick?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: In flight
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '165, '730 address space
- From: Ludis Langens <ludis@cruzers.com>
- Re:Re: Jet Performance scam?
- From: Mike Dillon <mdill@lsil.com>
- Re: Spark advance tuning made simple and quick?
- From: timsiford@hushmail.com
- Re: GTech as a testing device
- From: Davis <davis@mail.eecis.udel.edu>
- Re: In flight
- Re: Jet Performance scam? / now portable dyno
- Re: Jet Performance scam? / now portable dyno
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: Jet Performance scam and others
- From: "Programmer" <nwester@eidnet.org>
- Re: Jet Performance scam?
- From: "Programmer" <nwester@eidnet.org>
- Re: '165, '730 address space
- From: "Dave Zug" <dzug@delanet.com>
- Re: Jet Performance scam?
- From: "Dave Zug" <dzug@delanet.com>
- Re: GTech as a testing device
- From: "Dave Zug" <dzug@delanet.com>
- Re: GTech as a testing device
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: GTech as a testing device
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Modifying VE Tables
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Programming 808
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: GTech as a testing device
- From: "Dave Zug" <dzug@delanet.com>
- Re: Modifying VE Tables
- From: Len Sabatine <sabatine@epix.net>
- Re: '165, '730 address space
- From: Ludis Langens <ludis@cruzers.com>
- Re: '165, '730 address space
- From: "Dave Zug" <dzug@delanet.com>
- Re: Jet Performance scam and others
- From: "Jeff M" <tystorm@email.msn.com>
- EFI Pow Wow, Wow
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Spark advance tuning made simple and quick?
- Re: Spark advance tuning made simple and quick?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Spark advance tuning made simple and quick?
- From: "s. douglas taylor" <x5gb7uk9@wna-linknet.com>
- Re: Jet Performance scam and others
- From: "Programmer" <nwester@eidnet.org>
- Re: Jet Performance scam?
- From: "Programmer" <nwester@eidnet.org>
- Re: 749 question(s)
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Jet Performance scam?
- From: "Dave Zug" <dzug@delanet.com>
- Re: 749 question(s)
- From: "Lou" <lfaustini@atlantech.net>
- Re: Spark advance tuning made simple and quick?
- From: "Dave Zug" <dzug@delanet.com>
- Re: 749 question(s)
- From: Charles Morgan <charlesmorgan@home.com>
- Injector followup
- Re: Injector followup
- From: "Dave Zug" <dzug@delanet.com>
- Re: Injector followup
- From: "Dave Zug" <dzug@delanet.com>
- Re: EFI Pow Wow, Wow
- From: Scott Pearson <camarors_ss@yahoo.com>
- Re: 749 question(s)
- RE: Modifying VE Tables
- From: Reid Bishop <rbish@ibm.net>
- Re: PCV valve for TPI
- Re: Injector followup
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Injector followup
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Spark advance tuning made simple and quick?
- Re: Modifying VE Tables
- Re: PCV valve for TPI
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Injector followup
- From: "Dan Townsend" <xybertron@cox-internet.com>
- EFI Pow wow (summary)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Modifying VE Tables
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: PCV valve for TPI
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 749 question(s)
- Re: EFI Pow Wow, Wow
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: PCV valve for TPI
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Modifying VE Tables
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Spark advance tuning made simple and quick?
- From: Bob Valentine <bob@tecmark.com>
- Re: 7747 vs 8062
- From: Ludis Langens <ludis@cruzers.com>
- Re: 7747 vs 8062
- From: "s. douglas taylor" <x5gb7uk9@wna-linknet.com>
- Re: Injector followup
- Re: Spark advance tuning made simple and quick?
- From: timsiford@hushmail.com
- Re: Modifying VE Tables
- From: timsiford@hushmail.com
- Re: Modifying VE Tables
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Injector followup
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 749 question(s)
- Re: 7747 vs 8062
- From: Ludis Langens <ludis@cruzers.com>
- Re: EFI Pow Wow, Wow
- From: DC Smith <morepoweral@tetranet.net>
- Re: GTech as a testing device
- From: "Rex Weatherford" <rexweatherford@home.com>
- Re: EFI Pow Wow, Wow
- From: Squash <realsquash@yahoo.com>
- Re: EFI Pow wow (summary)
- From: Garfield Willis <garwillis@msn.com>
- Re: 749 question(s)
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: 749 question(s)
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: GTech as a testing device
- From: "Dave Zug." <dzug@delanet.com>
- RE: EFI Pow Wow, Wow
- From: Carl Summers <InTech@writeme.com>
- Re: GTech as a testing device
- From: "Rex Weatherford" <rexweatherford@home.com>
- O2 voltages
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EFI Pow Wow, Wow
- From: "Bruce Plecan" <nacelp@bright.net>
- AFR measurement was Re: O2 voltages
- From: "Dave Zug." <dzug@delanet.com>
- Re: O2 voltages
- From: timsiford@hushmail.com
- Re: AFR measurement was Re: O2 voltages
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 749 question(s)
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: 749 question(s)
- From: "alexpeper" <alexpeper@email.msn.com>
- Re: EFI Pow Wow, Wow
- From: Garfield Willis <garwillis@msn.com>
- Re: GTech as a testing device
- From: "Rex Weatherford" <rexweatherford@home.com>
- Re: Jet Performance scam?
- From: Bob Valentine <bob@tecmark.com>
- Re: GTech as a testing device
- From: steve ravet <sravet@arm.com>
- Re: EFI Pow Wow, Wow
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EFI Pow Wow, Wow
- From: "Bruce Plecan" <nacelp@bright.net>
- Ho ho ho Bin library
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ho ho ho Bin library
- From: "Walter Sherwin" <wsherwin@home.com>
- Calculating VE from MAF and MAP sensors
- From: "Chris Bennight" <Christopher_Bennight@baylor.edu>
- Re: 749 question(s)
- From: Ludis Langens <ludis@cruzers.com>
- Re: 749 question(s)
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- Re: Ho ho ho Bin library
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Calculating VE from MAF and MAP sensors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Jet Performance scam?
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: Jet Performance scam? / now portable dyno
- From: Shannen Durphey <shannen@grolen.com>
- Re: Ho ho ho Bin library
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: EFI Pow Wow, Wow
- From: Shannen Durphey <shannen@grolen.com>
- Re: O2 voltages
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: Ho ho ho Bin library
- From: Gabe <gellett@earthlink.net>
- Re: 749 question(s)
- From: Shannen Durphey <shannen@grolen.com>
- Re: O2 voltages
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '165, '730 address space
- From: Shannen Durphey <shannen@grolen.com>
- Re: Ho ho ho Bin library
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ho ho ho Bin library
- From: "Programmer" <nwester@eidnet.org>
- Re: O2 voltages
- From: "Programmer" <nwester@eidnet.org>
- Re: Ho ho ho Bin library
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Calculating VE from MAF and MAP sensors
- From: "Chris Bennight" <Christopher_Bennight@baylor.edu>
- Re: Ho ho ho Bin library
- From: Bob Valentine <bob@tecmark.com>
- Re: Ho ho ho Bin library
- From: Gabe <gellett@earthlink.net>
- Re: Ho ho ho Bin library
- From: Shannen Durphey <shannen@grolen.com>
- Long, and related to EFI ( was Re: PCV valve for TPI)
- From: Shannen Durphey <shannen@grolen.com>
- Re: Calculating VE from MAF and MAP sensors
- Re: Long, and related to EFI ( was Re: PCV valve for TPI)
- Re: Calculating VE from MAF and MAP sensors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Long, and related to EFI ( was Re: PCV valve for TPI)
- From: timsiford@hushmail.com
- Re: SHORT, and related to EFI ( was Re: PCV valve for TPI)
- Re: Jet Performance scam and others
- From: "Jeff M" <tystorm@email.msn.com>
- ALDL Cable
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: ALDL Cable
- From: "Swayze" <kswayze@bellsouth.net>
- new ALDL project
- From: steve ravet <sravet@arm.com>
- P+H Drivers
- From: "Bruce Plecan" <nacelp@bright.net>
- 727 definition files
- text messages
- Re: 727 definition files
- From: chetwagner@uswest.net
- Re: text messages
- From: Roger Heflin <rah@horizon.hit.net>
- Re: some longish lessons I do read! - 8625 anyone?
- 749 conversion
- From: chetwagner@uswest.net
- Re: Calculating VE from MAF and MAP sensors
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: some longish lessons I do read! - 8625 anyone?
- From: Shannen Durphey <shannen@grolen.com>
- Re: some longish lessons I do read! - 8625 anyone?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EFI Pow Wow, Wow
- From: Kevin Crain <kevin@warpten.com>
- Re: Part Throttle tuning for MAF (was MAF tables have a max of 255)
- From: Kevin Crain <kevin@warpten.com>
- RE: text messages
- From: Carl Summers <InTech@writeme.com>
- Re: some longish lessons I do read! - 8625 anyone?
- From: "Dave Zug" <dzug@delanet.com>
- Re: EFI Pow Wow, Wow
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EFI Pow Wow, Wow
- From: Kevin Crain <kevin@warpten.com>
- Re: Long, and related to EFI ( was Re: PCV valve for TPI)
- From: "Dave Zug" <dzug@delanet.com>
- Re: text messages
- From: "Dave Zug" <dzug@delanet.com>
- Re: EFI Pow Wow, Wow
- From: "Dave Zug" <dzug@delanet.com>
- RE: text messages
- From: Carl Summers <InTech@writeme.com>
- Re: EFI Pow Wow, Wow
- From: chetwagner@uswest.net
- Re: SHORT, and related to EFI ( was Re: PCV valve for TPI)
- Re: 749 conversion
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 749 conversion
- From: "Dave Zug" <dzug@delanet.com>
- Re: 749 conversion
- From: "TK" <terryk@foothill.net>
- Re: '165, '730 address space
- From: Ludis Langens <ludis@cruzers.com>
- My web page updated
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Plug reading
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 749 conversion
- Re: 749 conversion
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: Long, and related to EFI ( was Re: PCV valve for TPI)
- From: "Patrick G. Moore" <patm@cais.com>
- Re: text messages
- From: Mike Rolica <97005620@lambton.on.ca>
- Re: SHORT, and related to EFI ( was Re: PCV valve for TPI)
- From: "Bruce Plecan" <nacelp@bright.net>
- Other vehicle manufacturer data dumps
- From: Louis Baiani <neptilou@attcanada.ca>
- Re: 749 conversion
- From: chetwagner@uswest.net
- Re: SHORT, and related to EFI ( was Re: PCV valve for TPI)
- From: "Craig Marcho" <not_valid_email@airmail.net>
- new 7730 ecu file
- From: steve ravet <sravet@arm.com>
- Re: SHORT, and related to EFI ( was Re: PCV valve for TPI)
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: SHORT, and related to EFI ( was Re: PCV valve for TPI)
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- DIY WB
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: SHORT, and related to EFI ( was Re: PCV valve for TPI)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Calculating VE from MAF and MAP sensors
- From: "Chris Bennight" <Christopher_Bennight@baylor.edu>
- '165 wanted
- From: "Craig Marcho" <marcho@flash.net>
- Re: EFI Pow Wow, Wow
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- AFR measurement was Re: O2 voltages
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Nother thought
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: SHORT, and related to EFI ( was Re: PCV valve for TPI)
- From: bearbvd@cmn.net (Greg Hermann)
- Re: SHORT, and related to EFI ( was Re: PCV valve for TPI)
- Re: 7747 vs 8062
- From: "s. douglas taylor" <x5gb7uk9@wna-linknet.com>
- Re: SHORT, and related to EFI ( was Re: PCV valve for TPI)
- anti-theft chips ?
- From: "Programmer" <nwester@eidnet.org>
- RE: Nother thought
- From: Carl Summers <InTech@writeme.com>
- Re: Nother thought
- From: timsiford@hushmail.com
- Re:converting from lbs per hour
- Re: anti-theft chips ?
- From: Mike Rolica <97005620@lambton.on.ca>
- Re: anti-theft chips ?
- From: "Dave Zug." <dzug@delanet.com>
- Re: Nother thought
- From: "Dave Zug." <dzug@delanet.com>
- Re: Nother thought
- From: "Dave Zug." <dzug@delanet.com>
- Re: Nother thought
- From: Squash <realsquash@yahoo.com>
- Re:converting from lbs per hour
- From: John_Calabrese@ENGELHARD.COM
- Re: converting from lbs per hour
- Re: AFR measurement was Re: O2 voltages
- From: steve ravet <sravet@arm.com>
- Introduction to the List....
- CSH Closing temp
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: CSH Closing temp
- RE: CSH Closing temp
- From: "Kurek, Larry" <lkurek@anl.gov>
- GM Development Stuff
- From: "Kurek, Larry" <lkurek@anl.gov>
- Re:converting from lbs per hour
- From: bearbvd@cmn.net (Greg Hermann)
- RE: GM Development Stuff
- From: Gorden Jennings <gjennings@extremenetworks.com>
- Re: Nother thought
- From: timsiford@hushmail.com
- Re: CSH Closing temp
- From: timsiford@hushmail.com
- Re: anti-theft chips ?
- From: "Programmer" <nwester@eidnet.org>
- Re: anti-theft chips ?
- From: David Cooley <n5xmt@triad.rr.com>
- Re: anti-theft chips ?
- From: timsiford@hushmail.com
- RE: CSH Closing temp
- From: Eric Aos <EOA@spartek.com>
- Re: Nother thought
- From: "Dave Zug." <dzug@delanet.com>
- Re: anti-theft chips ?
- From: "Dave Zug." <dzug@delanet.com>
- Re: anti-theft chips ?
- From: "Dave Zug." <dzug@delanet.com>
- Re: CSH Closing temp
- From: "Dave Zug." <dzug@delanet.com>
- Re: GM Development Stuff
- From: "Dave Zug." <dzug@delanet.com>
- Re: Nother thought
- From: timsiford@hushmail.com
- Re: anti-theft chips ?
- From: timsiford@hushmail.com
- Datamaster and emulator at the same time
- From: Keith <kgil1@tampabay.rr.com>
- Re: anti-theft chips ?
- From: Shannen Durphey <shannen@grolen.com>
- RE: converting from lbs per hour
- From: Carl Summers <InTech@writeme.com>
- Re: Calculating VE from MAF and MAP sensors
- From: Scot Sealander <Sealand@clarityconnect.com>
- RE: [ISTA] Datamaster and emulator at the same time
- From: "Jim Sloan" <leroy@sunflower.com>
- Re: 749 conversion
- From: "Jon Fedock" <Galadar@worldnet.att.net>
- Re: 749 conversion
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: injector size (was Nother thought)
- From: "NickG" <nikog@mediaone.net>
- Re: CSH Closing temp
- From: Doug Dayson <djdayson@home.com>
- Re: 749 question(s)
- RE: 749 question(s)
- From: Eric Aos <EOA@spartek.com>
- Re: '165 wanted
- From: Mike Rolica <97005620@lambton.on.ca>
- EGR tuning
- From: Ernst denBroeder <edenbroe@cisco.com>
- Re: injector size (was Nother thought)
- From: timsiford@hushmail.com
- Re: CSH Closing temp
- From: Ross Corrigan <280zx@home.com>
- Re: 749 question(s)
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: EGR tuning
- From: "Programmer" <nwester@eidnet.org>
- Re: Datamaster and emulator at the same time
- From: Keith <kgil1@tampabay.rr.com>
- 749 conversion from 730??
- From: "Jeffrey Scott" <jws6367@lycos.com>
- Re: 749 question(s)
- From: David Cooley <n5xmt@triad.rr.com>
- Re: 749 question(s)
- From: "alexpeper" <alexpeper@email.msn.com>
- Buick turbo fiting?
- From: Scott Lundahl <scott@lumenetics.com>
- Re: 749 conversion from 730??
- From: chetwagner@uswest.net
- CSH-HQ
- From: mswayze@truswood.com (Mike Swayze)
- chysler obdii
- Re: 749 conversion from 730??
- From: "Jon Fedock" <Galadar@worldnet.att.net>
- Re: 749 conversion
- From: "Jon Fedock" <Galadar@worldnet.att.net>
- Re: anti-theft chips ?
- From: "Programmer" <nwester@eidnet.org>
- Re: CSH-HQ
- 96 pcm w/ 95 harness
- From: "Mike" <itsmike@lvcm.com>
- Cold startup
- From: Squash <realsquash@yahoo.com>
- Re: CSH-HQ
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Nother thought
- From: "Dave Zug" <dzug@delanet.com>
- Re: anti-theft chips ?
- From: "Dave Zug" <dzug@delanet.com>
- Re: anti-theft chips ?
- From: "Dave Zug" <dzug@delanet.com>
- Re: '165 wanted
- From: "Dave Zug" <dzug@delanet.com>
- Re: injector size (was Nother thought)
- From: "Dave Zug" <dzug@delanet.com>
- Re: anti-theft chips ?
- From: "Dave Zug" <dzug@delanet.com>
- Re: '165 wanted
- Re: CSH-HQ
- From: "Dave Zug" <dzug@delanet.com>
- Re: '165 wanted
- From: "Dave Zug" <dzug@delanet.com>
- Wanted
- From: "Dave Zug" <dzug@delanet.com>
- RE: '165 wanted
- From: "Craig Marcho" <marcho@flash.net>
- MAP calculations?
- From: Reid Bishop <rbish@ibm.net>
- RE: CSH-HQ
- From: Carl Summers <InTech@writeme.com>
- Re: '165 wanted
- From: "Dave Zug" <dzug@delanet.com>
- Re: CSH-HQ
- From: DC Smith <morepoweral@tetranet.net>
- Re: MAP calculations?
- From: "Dave Zug" <dzug@delanet.com>
- Re: anti-theft chips ?
- From: timsiford@hushmail.com
- Re: 749 question(s)
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: MAP calculations?
- From: rr <RRauscher@nni.com>
- Re: injector size (was Nother thought)
- From: timsiford@hushmail.com
- Re: Nother thought
- From: timsiford@hushmail.com
- Re: Nother thought
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 749 conversion from 730??
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Nother thought
- Re: Nother thought
- Re: Nother thought
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: CSH-HQ What happened
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '165 wanted
- From: Gabe <gellett@earthlink.net>
- Re: CSH-HQ What happened
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: Nother thought
- From: timsiford@hushmail.com
- Re: MAP calculations?
- From: Louis Baiani <neptilou@attcanada.ca>
- Dragstrip Plus
- From: timsiford@hushmail.com
- Re: CSH-HQ What happened
- From: Doug Dayson <djdayson@home.com>
- Re: Nother thought
- From: "Dave Zug" <dzug@delanet.com>
- Re: Dragstrip Plus
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Dragstrip Plus
- From: "Dave Zug" <dzug@delanet.com>
- where to buy EPROMs
- From: Keith <kgil1@tampabay.rr.com>
- Re: where to buy EPROMs
- Re: Nother thought
- From: bearbvd@cmn.net (Greg Hermann)
- Re: Nother thought
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: where to buy EPROMs
- From: Squash <realsquash@yahoo.com>
- Re: Nother thought
- From: timsiford@hushmail.com
- Re: Dragstrip Plus
- From: timsiford@hushmail.com
- 8051 disassembly
- From: Dale Klein <daklein@netzero.net>
- Re: Cold startup
- From: Bob Valentine <bob@tecmark.com>
- Re: Cold startup
- From: Shannen Durphey <shannen@grolen.com>
- Re: 8051 disassembly
- From: rr <RRauscher@nni.com>
- Re: Dragstrip Plus
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Nother thought
- From: "Dave Zug" <dzug@delanet.com>
- Cold-start craziness?
- Re: Cold-start craziness?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Cold-start craziness?
- From: "Bruce Plecan" <nacelp@bright.net>
- 16233396PCM - 51862 chip ?
- From: Daniel Henriksson <rotax@ludd.luth.se>
- 95 lt1 pcm
- From: "Mike" <itsmike@lvcm.com>
- Re: 95 lt1 pcm
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: 350 vs. 383
- Re: Cold-start craziness?
- Re: 350 vs. 383
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MAP calculations?
- From: chetwagner@uswest.net
- Re: 350 vs. 383
- Re: 350 vs. 383
- From: "Dave Zug" <dzug@delanet.com>
- Re: 350 vs. 383
- From: "Dave Zug" <dzug@delanet.com>
- 350TPI Fuel Consump Problem
- From: Don Burns <donburns@macconnect.com>
- Re: 350TPI Fuel Consump Problem
- From: "Dave Zug" <dzug@delanet.com>
- New setup....need some help!
- From: "David Tuschhoff" <davidlt@i-55.com>
- Re: 350TPI Fuel Consump Problem
- From: "Dave Zug" <dzug@delanet.com>
- Re: 749 conversion
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: 350TPI Fuel Consump Problem
- From: Bob Valentine <bob@tecmark.com>
- Re: Cold-start craziness?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 350TPI Fuel Consump Problem
- From: Shannen Durphey <shannen@grolen.com>
- Re: 350 vs. 383
- From: "Bruce Plecan" <nacelp@bright.net>
- reading a Knock Sensor
- From: Keith <kgil1@tampabay.rr.com>
- Re: reading a Knock Sensor
- Re: 350 vs. 383
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 350TPI Fuel Consump Problem
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: reading a Knock Sensor
- From: Shannen Durphey <shannen@grolen.com>
- Re: reading a Knock Sensor
- From: Keith <kgil1@tampabay.rr.com>
- Fuel Econ and Hiway Mode
- From: Bob Valentine <bob@tecmark.com>
- Re: reading a Knock Sensor
- From: Roger Heflin <rah@horizon.hit.net>
- Re: New setup....need some help!
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: reading a Knock Sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: SHORT, and related to EFI ( was Re: PCV valve for TPI)
- From: Scott Pearson <camarors_ss@yahoo.com>
- Re: reading a Knock Sensor
- From: "spidy" <spidy@picknowl.com.au>
- Re: reading a Knock Sensor
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Fuel Econ and Hiway Mode
- From: timsiford@hushmail.com
- VIRUS FOUND IN DIY-EFI DIGEST
- From: mswayze@truswood.com (Mike Swayze)
- Re: New setup....need some help!
- From: Squash <realsquash@yahoo.com>
- Re: VIRUS FOUND IN DIY-EFI DIGEST
- From: Andrew Mattei <amattei@mindspring.com>
- Re: VIRUS FOUND IN DIY-EFI DIGEST
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Fuel Econ and Hiway Mode
- From: "Kevin R" <KEReyn@gte.net>
- Re: New setup....need some help!
- From: "Kevin R" <KEReyn@gte.net>
- Re: VIRUS FOUND IN DIY-EFI DIGEST
- From: "Kevin R" <KEReyn@gte.net>
- Re: New setup....need some help!
- From: Squash <realsquash@yahoo.com>
- Re: VIRUS FOUND IN DIY-EFI DIGEST
- From: "Swayze" <kswayze@bellsouth.net>
- 16149396 ECM
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Fuel Econ and Hiway Mode
- From: rr <RRauscher@nni.com>
- Re: VIRUS FOUND IN DIY-EFI DIGEST
- From: "Dave Zug." <dzug@delanet.com>
- Re: VIRUS FOUND IN DIY-EFI DIGEST
- From: "Swayze" <kswayze@bellsouth.net>
- flash programming
- Re: VIRUS FOUND IN DIY-EFI DIGEST
- From: Roger Heflin <rah@horizon.hit.net>
- Re: New setup....need some help!
- From: "Kevin R" <KEReyn@gte.net>
- Re: 16149396 ECM
- From: "TK" <terryk@foothill.net>
- Re: 16149396 ECM
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re:95 lt1 pcm
- From: Bill Shaw <bshaw@connix.com>
- Re: 749 conversion
- From: Galadar@worldnet.att.net (Jon Fedock)
- Re: 749 conversion
- From: Tom Sharpe <twsharpe@mtco.com>
- Re: 16149396 ECM
- From: "TK" <terryk@foothill.net>
- Re: VIRUS FOUND IN DIY-EFI DIGEST
- From: "Mike" <kswayze@bellsouth.net>
- Re: 749 conversion......Attn: Tom Sharpe
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Re: 16149396 ECM
- From: Shannen Durphey <shannen@grolen.com>
- 1228746 vats and speed limiter
- From: "UnderDogRS" <amnewman@mpinet.net>
- Re: 1228746 vats and speed limiter
- From: Shannen Durphey <shannen@grolen.com>
- 1228746 vats and speed limiter **Fixed**
- From: "UnderDogRS" <amnewman@mpinet.net>
- Re: 1228746 vats and speed limiter **Fixed**
- From: Shannen Durphey <shannen@grolen.com>
- Re: Fuel Econ and Hiway Mode
- From: "Dave & Irina Eicher" <sailors@mwci.net>
- Re: Fuel Econ and Hiway Mode
- From: Len Sabatine <sabatine@epix.net>
- Re: Fuel Econ and Hiway Mode
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Fuel Econ and Hiway Mode
- Re: Fuel Econ and Hiway Mode
- From: Len Sabatine <sabatine@epix.net>
- Re: Fuel Econ and Hiway Mode
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Fuel Econ and Hiway Mode
- Re: Fuel Econ and Hiway Mode
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Fuel Econ and Hiway Mode
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Fuel Econ and Hiway Mode
- From: Gabe <gellett@earthlink.net>
- Re: Fuel Econ and Hiway Mode
- Re: Fuel Econ and Hiway Mode
- From: David Cooley <n5xmt@triad.rr.com>
- EGR
- From: "Bruce Plecan" <nacelp@bright.net>
- 747 spark over run
- From: "Kevin R" <KEReyn@gte.net>
- Re: Fuel Econ and Hiway Mode
- Re: Fuel Econ and Hiway Mode
- From: Len Sabatine <sabatine@epix.net>
- Re: Fuel Econ and Hiway Mode
- From: Len Sabatine <sabatine@epix.net>
- Re: Fuel Econ and Hiway Mode
- From: Gabe <gellett@earthlink.net>
- Re: Fuel Econ and Hiway Mode
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 747 spark over run
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Fuel Econ and Hiway Mode
- From: "Bruce Plecan" <nacelp@bright.net>
- EGR Q's (was: Fuel Econ and Hiway Mode)
- From: Tim Welden <twelden@evolving.com>
- Re: EGR Q's (was: Fuel Econ and Hiway Mode)
- From: Andrew Mattei <amattei@mindspring.com>
- Re: Fuel Econ and Hiway Mode
- From: Len Sabatine <sabatine@epix.net>
- Re: Fuel Econ and Hiway Mode
- From: "Mark S. Riley" <turbotuneusltd@triad.rr.com>
- Re: EGR Q's (was: Fuel Econ and Hiway Mode)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Fuel Econ and Hiway Mode
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EGR Q's (was: Fuel Econ and Hiway Mode)
- From: rr <RRauscher@nni.com>
- Re: Fuel Econ and Hiway Mode
- From: rr <RRauscher@nni.com>
- Re: EGR Q's (was: Fuel Econ and Hiway Mode)
- From: "Dave Zug" <dzug@delanet.com>
- Re: Fuel Econ and Hiway Mode
- From: "Mark S. Riley" <turbotuneusltd@triad.rr.com>
- Re: EGR Q's (was: Fuel Econ and Hiway Mode)
- From: "Dan Townsend" <xybertron@cox-internet.com>
- FW: Help- Idle is driving me NUTS!
- From: Reid Bishop <rbish@ibm.net>
- Re: EGR Q's (was: Fuel Econ and Hiway Mode)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Help- Idle is driving me NUTS!
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: FW: Help- Idle is driving me NUTS!
- Re: Fuel Econ and Hiway Mode
- From: "Programmer" <nwester@eidnet.org>
- Re: Help- Idle is driving me NUTS!
- Re: Help- Idle is driving me NUTS!
- From: "Programmer" <nwester@eidnet.org>
- Re: Way OT, now cam Q ( was EGR Q's (was: Fuel Econ and Hiway Mode))
- From: Shannen Durphey <shannen@grolen.com>
- Re: FW: Help- Idle is driving me NUTS!
- From: Len Sabatine <sabatine@epix.net>
- Re: EGR Q's (was: Fuel Econ and Hiway Mode)
- From: Len Sabatine <sabatine@epix.net>
- Re: Way OT, now cam Q ( was EGR Q's (was: Fuel Econ and Hiway Mode))
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Way OT, now cam Q ( was EGR Q's (was: Fuel Econ and Hiway Mode))
- From: Shannen Durphey <shannen@grolen.com>
- Re: New setup....need some help!
- From: Squash <realsquash@yahoo.com>
- Pocket programmer users...
- From: "David Tuschhoff" <davidlt@i-55.com>
- Re: EGR Q's (was: Fuel Econ and Hiway Mode)
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Pocket programmer users...
- From: "Edward J. Malkiewicz" <krazyed@worldnet.att.net>
- RE: Help- Idle is driving me NUTS!
- From: Reid Bishop <rbish@ibm.net>
- RE: Help- Idle is driving me NUTS!
- From: Reid Bishop <rbish@ibm.net>
- RE: FW: Help- Idle is driving me NUTS!
- From: Reid Bishop <rbish@ibm.net>
- Re: Pocket programmer users...
- From: "Jim Wilson" <Wilson.James4@worldnet.att.net>
- Re: Way OT, now cam Q ( was EGR Q's (was: Fuel Econ and Hiway Mode))
- From: David Cooley <n5xmt@triad.rr.com>
- RE: Fuel Econ and Hiway Mode
- From: "Guenther, Max [ASCO/PA]" <Mguenther@ASCO.COM>
- Re: Help- Idle is driving me NUTS!
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Fuel Econ and Hiway Mode
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Help- Idle is driving me NUTS!
- Re: Fuel Econ and Hiway Mode
- Re: Fuel Econ and Hiway Mode
- From: David Cooley <n5xmt@triad.rr.com>
- test? is the list still around?
- From: Pat Ford <pford@qnx.com>
- Re: test? is the list still around?
- From: Squash <realsquash@yahoo.com>
- Re: test? is the list still around?
- From: Squash <realsquash@yahoo.com>
- RE: GM Development Stuff
- From: "Kurek, Larry" <lkurek@anl.gov>
- 1226865 ?
- From: "Craig Marcho" <marcho@flash.net>
- Re: Way OT, now cam Q ( was EGR Q's (was: Fuel Econ and Hiway Mode))
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- RE: GM Development Stuff
- From: Gorden Jennings <gjennings@extremenetworks.com>
- RE: Help- Idle is driving me NUTS!
- From: "Gregory A. Parmer" <gparmer@acesag.auburn.edu>
- Re: Fuel Econ and Hiway Mode
- Re: Fuel Econ and Hiway Mode
- From: Shannen Durphey <shannen@grolen.com>
- Re: 1226865 ?
- From: Ludis Langens <ludis@cruzers.com>
- Re: FW: Help- Idle is driving me NUTS!
- From: rr <RRauscher@nni.com>
- Re: 1226865 ?
- From: Shannen Durphey <shannen@grolen.com>
- hi-way fuel and mask 88h
- From: rr <RRauscher@nni.com>
- RE: 1226865 ?
- From: "Craig Marcho" <marcho@flash.net>
- Re: EGR Q's (was: Fuel Econ and Hiway Mode)
- From: "Walter Sherwin" <wsherwin@home.com>
- RE: 1226865 ?
- From: "Craig Marcho" <marcho@flash.net>
- Re: 749 conversion
- From: "Jon Fedock" <Galadar@worldnet.att.net>
- Re: reading a Knock Sensor
- From: "Programmer" <nwester@eidnet.org>
- Re: CSH-HQ
- From: "Programmer" <nwester@eidnet.org>
- Closing Date for Combo Driver Buy
- CSH, HQ Grand re-re- opening
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: reading a Knock Sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: reading a Knock Sensor
- From: "spidy" <spidy@picknowl.com.au>
- EGR on/off temp
- From: "Kevin R" <KEReyn@gte.net>
- Re: reading a Knock Sensor
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: EGR on/off temp
- Re: CSH, HQ Grand re-re- opening
- CSH, HQ Grand re-re- opening
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: hi-way fuel and mask 88h
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Fuel Econ and Hiway Mode
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Fuel Econ and Hiway Mode
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- RE: Fuel Econ and Hiway Mode
- From: "Guenther, Max [ASCO/PA]" <Mguenther@ASCO.COM>
- Spark Plug Info...
- From: "Craig Marcho" <not_valid_email@airmail.net>
- RE: EGR Q's (was...)
- From: Tim Welden <twelden@evolving.com>
- Re: reading a Knock Sensor
- From: "spidy" <spidy@picknowl.com.au>
- RE: Fuel Econ and Hiway Mode
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- 730 Pump Shot
- From: timsiford@hushmail.com
- Re: EGR Q's (was...)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 Pump Shot
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: EGR Q's (re Bruce..)
- From: Tim Welden <twelden@evolving.com>
- Re: 730 Pump Shot
- From: timsiford@hushmail.com
- Re: 16149396 ECM
- From: Shawn Lin <slin01@mail.orion.org>
- Re: 730 Pump Shot
- From: Squash <realsquash@yahoo.com>
- Re: '165 wanted
- From: Ludis Langens <ludis@cruzers.com>
- Re: 730 Pump Shot
- From: timsiford@hushmail.com
- Re: 730 Pump Shot
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EGR on/off temp
- From: rr <RRauscher@nni.com>
- Re: CSH, HQ Grand re-re- opening
- From: rr <RRauscher@nni.com>
- Re: 730 Pump Shot
- From: timsiford@hushmail.com
- Re: 730 Pump Shot
- From: Squash <realsquash@yahoo.com>
- RE: EGR Q's (re Bruce..)
- From: Bob Valentine <bob@tecmark.com>
- Re: MAP calculations?
- From: Ludis Langens <ludis@cruzers.com>
- Re: CSH, HQ Grand re-re- opening
- From: Shannen Durphey <shannen@grolen.com>
- re: 730 Pump Shot
- From: "NickG" <nikog@mediaone.net>
- EGR disabled and Knocking
- From: "Brent" <WildKat@paonline.com>
- Re: EGR disabled and Knocking
- From: Shannen Durphey <shannen@grolen.com>
- Newbie help
- From: Andrew McRory <amacc@iron-bridge.net>
- Re: EGR disabled and Knocking
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Newbie help
- From: Shannen Durphey <shannen@grolen.com>
- Re: EGR disabled and Knocking
- From: "Kevin R" <KEReyn@gte.net>
- Re: Newbie help
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EGR disabled and Knocking
- Re: EGR disabled and Knocking
- From: "Bruce Plecan" <nacelp@bright.net>
- commenting of disassembled code
- From: Dale Klein <daklein@netzero.net>
- Re: Way OT, now cam Q ( was EGR Q's (was: Fuel Econ and Hiway Mode))
- From: "David Tuschhoff" <davidlt@i-55.com>
- Re: Fuel Econ and Hiway Mode
- Re: Fuel Econ and Hiway Mode
- Re: EGR disabled and Knocking
- From: Len Sabatine <sabatine@epix.net>
- Re: hi-way fuel and mask 88h
- From: Ludis Langens <ludis@cruzers.com>
- Re: 16149396 ECM
- From: Ludis Langens <ludis@cruzers.com>
- Re: 7747 vs 8062
- From: Ludis Langens <ludis@cruzers.com>
- Re: 16149396 ECM
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- re: 730 Pump Shot
- From: timsiford@hushmail.com
- Re: 730 Pump Shot
- From: timsiford@hushmail.com
- Weird problem - any ideas?
- From: Roger Heflin <rah@horizon.hit.net>
- RE: EGR Q's (re Bruce..)
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- re: 730 Pump Shot
- From: Squash <realsquash@yahoo.com>
- Re: Closing Date for Combo Driver Buy
- From: "Dave & Irina Eicher" <sailors@mwci.net>
- Re: 730 Pump Shot
- From: "Bruce Plecan" <nacelp@bright.net>
- re: 730 Pump Shot
- From: Bob Valentine <bob@tecmark.com>
- RE: EGR Q's (re Bruce..)
- From: Bob Valentine <bob@tecmark.com>
- Re: 730 Pump Shot
- From: "Swayze" <kswayze@bellsouth.net>
- Re: EGR disabled and Knocking
- From: "Programmer" <nwester@eidnet.org>
- Re: commenting of disassembled code
- From: steve ravet <sravet@arm.com>
- re: 730 Pump Shot
- Re: EGR Q's (re Bruce..)
- From: "Dan Townsend" <xybertron@cox-internet.com>
- re: 730 Pump Shot
- From: timsiford@hushmail.com
- Re: 730 Pump Shot
- From: timsiford@hushmail.com
- RE: EGR Q's (re Bruce..)
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- re: 730 Pump Shot
- From: Squash <realsquash@yahoo.com>
- re: 730 Pump Shot
- From: timsiford@hushmail.com
- re: 730 Pump Shot
- From: Squash <realsquash@yahoo.com>
- Tuning question for 730 ECM
- From: "Edmond" <euro@lvcm.com>
- Re: Tuning question for 730 ECM
- From: Squash <realsquash@yahoo.com>
- Re: Tuning question for 730 ECM
- From: timsiford@hushmail.com
- Scanning software
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: 730 Pump Shot
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 Pump Shot
- From: "Swayze" <kswayze@bellsouth.net>
- Re: hi-way fuel and mask 88h
- From: rr <RRauscher@nni.com>
- Re: 730 Pump Shot
- From: Bob Valentine <bob@tecmark.com>
- Re: 730 Pump Shot
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: commenting of disassembled code
- From: Donald Whisnant <dewhisna@ix.netcom.com>
- Re: commenting of disassembled code
- From: Scot Sealander <Sealand@clarityconnect.com>
- Re: 730 Pump Shot
- From: "Programmer" <nwester@eidnet.org>
- Re: tuning q for 730 ecm
- Broken Combo driver buy page
- Re: hi-way fuel and mask 88h
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Newbie help
- From: Andrew McRory <amacc@iron-bridge.net>
- Re: tuning q for 730 ecm
- From: "Edmond" <euro@lvcm.com>
- Re: Newbie help
- From: rr <RRauscher@nni.com>
- Re: Newbie help
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: hi-way fuel and mask 88h
- From: rr <RRauscher@nni.com>
- Re: reading a Knock Sensor
- From: "Programmer" <nwester@eidnet.org>
- Oxygen Sensor Replacement
- From: Louis Baiani <neptilou@attcanada.ca>
- Re: Oxygen Sensor Replacement
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: reading a Knock Sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Oxygen Sensor Replacement
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: reading a Knock Sensor
- From: "Programmer" <nwester@eidnet.org>
- Re: reading a Knock Sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Oxygen Sensor Replacement
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Oxygen Sensor Replacement
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Newbie help
- Re: Oxygen Sensor Replacement
- From: timsiford@hushmail.com
- Re: 730 Pump Shot
- From: "David Tuschhoff" <davidlt@i-55.com>
- Re: Oxygen Sensor Replacement
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Tuning question for 730 ECM
- From: Shannen Durphey <shannen@grolen.com>
- Re: 7747 vs 8062
- From: "s. douglas taylor" <x5gb7uk9@wna-linknet.com>
- Re: Oxygen Sensor Replacement
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 Pump Shot
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 7747 vs 8062
- From: Shannen Durphey <shannen@grolen.com>
- Re: Newbie help
- From: Shannen Durphey <shannen@grolen.com>
- Re: Oxygen Sensor Replacement
- From: Shannen Durphey <shannen@grolen.com>
- Re: reading a Knock Sensor
- From: "Programmer" <nwester@eidnet.org>
- Re: 730 Pump Shot
- From: Shannen Durphey <shannen@grolen.com>
- Re: 730 Pump Shot
- From: Squash <realsquash@yahoo.com>
- Re: Oxygen Sensor Replacement
- From: timsiford@hushmail.com
- Re: 730 Pump Shot
- From: timsiford@hushmail.com
- Re: Tuning question for 730 ECM
- From: timsiford@hushmail.com
- Re: 730 Pump Shot
- From: timsiford@hushmail.com
- Pre 1999 Archives
- From: timsiford@hushmail.com
- Re: Tuning question for 730 ECM
- Re: Tuning question for 730 ECM
- From: "Dave Zug" <dzug@delanet.com>
- Re: tuning q for 730 ecm
- From: "Dave Zug" <dzug@delanet.com>
- Re: Tuning question for 730 ECM
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Programmer choices....
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Tuning question for 730 ECM
- From: timsiford@hushmail.com
- Re: Oxygen Sensor Replacement
- From: timsiford@hushmail.com
- Re: tuning q for 730 ecm
- From: timsiford@hushmail.com
- Injector DC again/N2O
- From: "Dave Zug" <dzug@delanet.com>
- Re: Pre 1999 Archives
- From: "Dave Zug" <dzug@delanet.com>
- Re: Tuning question for 730 ECM
- From: "Dave Zug" <dzug@delanet.com>
- Re: Oxygen Sensor Replacement
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Pre 1999 Archives
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Re: Pre 1999 Archives
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Tuning question for 730 ECM
- From: timsiford@hushmail.com
- Re: Programmer choices....
- From: Andrew McRory <amacc@iron-bridge.net>
- Re: Programmer choices....
- From: "Dave Zug" <dzug@delanet.com>
- Re: Injector DC again/N2O
- From: timsiford@hushmail.com
- Re: Tuning question for 730 ECM
- From: "Dave Zug" <dzug@delanet.com>
- Re: Programmer choices....
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Pre 1999 Archives
- From: timsiford@hushmail.com
- Re: Pre 1999 Archives
- From: "Dave Zug" <dzug@delanet.com>
- Re: Injector DC again/N2O
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Programmer choices....
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Tuning question for 730 ECM
- From: timsiford@hushmail.com
- Re: Injector DC again/N2O
- From: "Dave Zug" <dzug@delanet.com>
- Re: Pre 1999 Archives
- From: "Dave Zug" <dzug@delanet.com>
- Re: Programmer choices....
- From: "Dave Zug" <dzug@delanet.com>
- Re: Pre 1999 Archives
- From: "Programmer" <nwester@eidnet.org>
- Re: Injector DC again/N2O
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Pre 1999 Archives
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Injector DC again/N2O
- From: timsiford@hushmail.com
- Re: Injector DC again/N2O
- From: timsiford@hushmail.com
- Re: Pre 1999 Archives
- From: timsiford@hushmail.com
- Re: Injector DC again/N2O
- From: timsiford@hushmail.com
- Re: Pre 1999 Archives
- From: Shannen Durphey <shannen@grolen.com>
- Re: Tuning question for 730 ECM
- From: Shannen Durphey <shannen@grolen.com>
- Re: TCC Tuning question for 730 ECM
- From: Shannen Durphey <shannen@grolen.com>
- Re: Pre 1999 Archives
- From: "Dave Zug" <dzug@delanet.com>
- Re: Injector DC again/N2O
- From: "Dave Zug" <dzug@delanet.com>
- Re: Tuning question for 730 ECM
- From: Bob Valentine <bob@tecmark.com>
- GM 3 wire O2 sensor dilemma
- Re: Programmer choices....
- RE: EGR disabled and Knocking
- From: "Rodney Fulk" <elixir@pathwaynet.com>
- Re: GM 3 wire O2 sensor dilemma
- From: "Jon Fedock" <Galadar@worldnet.att.net>
- Re: Oxygen Sensor Replacement - Try A Redundant Ground Lead
- From: "Walter Sherwin" <wsherwin@home.com>
- 7747 spark control questions.
- From: "Kevin R" <KEReyn@gte.net>
- Re: GM 3 wire O2 sensor dilemma
- From: Shannen Durphey <shannen@grolen.com>
- ABTD 0731 Memcal
- From: Bob Valentine <bob@tecmark.com>
- howell730 bin file
- From: chetwagner@uswest.net
- Re: Pre 1999 Archives
- From: steve ravet <sravet@arm.com>
- Re: Oxygen Sensor Replacement - Try A Redundant Ground Lead
- From: "Walter Sherwin" <wsherwin@home.com>
- RE: ABTD 0731 Memcal
- From: "Craig Marcho" <marcho@flash.net>
- Re: ABTD 0731 Memcal
- From: Shannen Durphey <shannen@grolen.com>
- Re: 7747 spark control questions.
- From: Shannen Durphey <shannen@grolen.com>
- Re: howell730 bin file
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: GM 3 wire O2 sensor dilemma
- Re: TCC Stuff
- Re: howell730 bin file
- From: "Walter Sherwin" <wsherwin@home.com>
- TC lockup & 749 ECU
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Oxygen Sensor Replacement - Try A Redundant Ground Lead
- From: "Dave Zug" <dzug@delanet.com>
- Re: 7747 spark control questions.
- From: rr <RRauscher@nni.com>
- Re: howell730 bin file
- From: Squash <realsquash@yahoo.com>
- Re: Mandatory TC Lockup
- From: "Dave Zug" <dzug@delanet.com>
- A few questions.....
- From: "David Tuschhoff" <davidlt@i-55.com>
- Re: Inverted flight EFI?/HPTV
- From: "Dave Zug" <dzug@delanet.com>
- Re: Inverted flight EFI?/HPTV
- From: "Dave Zug" <dzug@delanet.com>
- Re: howell730 bin file
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Inverted flight EFI?/HPTV
- From: Shannen Durphey <shannen@grolen.com>
- Re: Inverted flight EFI?/HPTV
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 7747 spark control questions.
- From: "Programmer" <nwester@eidnet.org>
- Re: A few questions.....
- Re: Mandatory TC Lockup
- From: "Edmond" <euro@lvcm.com>
- Question about MAP
- From: "Edmond" <euro@lvcm.com>
- Re: Tuning question for 730 ECM
- From: sapearso@collins.rockwell.com
- Re: TC lockup & 749 ECU
- From: Roger Heflin <rah@horizon.hit.net>
- Other readings
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: Question about MAP
- From: timsiford@hushmail.com
- Re: Question about MAP
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: hi-way fuel and mask 88h
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: TC lockup
- From: timsiford@hushmail.com
- Re: hi-way fuel and mask 88h
- Re: heater o2
- Re: Question about MAP
- From: "Edmond" <euro@lvcm.com>
- Re: Other readings
- From: steve ravet <sravet@arm.com>
- ALDL stream recycle time
- From: "Dave Zug." <dzug@delanet.com>
- Re: Tuning question for 730 ECM
- From: rr <RRauscher@nni.com>
- Re: Question about MAP
- From: rr <RRauscher@nni.com>
- ot: toytoa ecms
- From: Pat Ford <pford@qnx.com>
- Re: Oxygen Sensor Replacement - Try A Redundant Ground Lead
- From: "Walter Sherwin" <wsherwin@home.com>
- Help- Idle is driving me NUTS!
- From: Reid Bishop <rbish@ibm.net>
- BOUNCE gmecm@lists.diy-efi.org: Admin request of type /^\s*config\b/i at line 5 (fwd)
- Re: tuning q for 730 ecm
- From: "Dave Zug" <dzug@delanet.com>
- Re: toytoa ecms
- From: "Mike" <kswayze@bellsouth.net>
- two new papers, '747 stuff.
- From: rr <RRauscher@nni.com>
- Re: two new papers, '747 stuff.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Newbie help
- From: Andrew McRory <amacc@iron-bridge.net>
- Re: Newbie help
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: two new papers, '747 stuff.
- From: rr <RRauscher@nni.com>
- Re: two new papers, '747 stuff.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Newbie help
- From: Andrew McRory <amacc@iron-bridge.net>
- Re: Newbie help
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Newbie help
- Re: two new papers, '747 stuff.
- From: rr <RRauscher@nni.com>
- Re: Newbie help
- From: Shannen Durphey <shannen@grolen.com>
- Re: Help- Idle is driving me NUTS!
- From: "Programmer" <nwester@eidnet.org>
- FREE efi stuff
- From: Bob Valentine <bob@tecmark.com>
- RE: Help- Idle is driving me NUTS!
- From: Reid Bishop <rbish@ibm.net>
- RE: 7747 spark control questions.
- From: Reid Bishop <rbish@ibm.net>
- RE: two new papers, '747 stuff.
- From: Reid Bishop <rbish@ibm.net>
- Re: ALDL stream recycle time
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: toytoa ecms
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- RE: two new papers, '747 stuff.
- Re: Newbie help
- From: Andrew McRory <amacc@iron-bridge.net>
- Re: tuning q for 730 ecm
- From: timsiford@hushmail.com
- Re: Help- Idle is driving me NUTS!
- From: "Programmer" <nwester@eidnet.org>
- Re: 7747 spark control questions.
- From: "Programmer" <nwester@eidnet.org>
- Re: ALDL stream recycle time
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- ecm's
- From: "Matt Walters" <mwalters@rapid.com>
- TCC lockup was Re: Tuning question for 730 ECM
- From: "Craig Marcho" <not_valid_email@airmail.net>
- Re: ecm's
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ecm's
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: two new papers, '747 stuff.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: two new papers, '747 stuff.
- From: steve ravet <sravet@arm.com>
- Re: ecm's
- From: timsiford@hushmail.com
- Re: ecm's
- From: timsiford@hushmail.com
- Re: ecm's
- From: Len Sabatine <sabatine@epix.net>
- Re: 7747 spark control questions.
- From: Shannen Durphey <shannen@grolen.com>
- Re: Pre 1999 Archives
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: ecm's
- From: Andrew McRory <amacc@iron-bridge.net>
- Re: TC lockup
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: 7747 spark control questions.
- From: "Kevin R" <KEReyn@gte.net>
- Re: ecm's
- From: donburns@macconnect.com
- Re: ecm's
- From: Len Sabatine <sabatine@epix.net>
- RE: tuning q for 730 ecm
- From: Reid Bishop <rbish@ibm.net>
- Re: ecm's
- From: "Edmond" <euro@lvcm.com>
- Re: ecm's
- From: Len Sabatine <sabatine@epix.net>
- RE: tuning q for 730 ecm
- From: Len Sabatine <sabatine@epix.net>
- Re: 7747 spark control questions.
- From: "Programmer" <nwester@eidnet.org>
- Re: tuning q for 730 ecm
- From: "Craig Marcho" <not_valid_email@airmail.net>
- Re: 7747 spark control questions.
- From: Squash <realsquash@yahoo.com>
- Re: tuning q for 730 ecm
- From: timsiford@hushmail.com
- Re: ecm's
- From: donburns@macconnect.com
- RE: ecm's
- From: "Matt Walters" <mwalters@rapid.com>
- Re: 7747 spark control questions.
- From: "Programmer" <nwester@eidnet.org>
- Re: 7747 spark control questions.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 7747 spark control questions.
- From: "Programmer" <nwester@eidnet.org>
- Re: ecm's
- From: Len Sabatine <sabatine@epix.net>
- RE: ecm's
- From: Bob Valentine <bob@tecmark.com>
- Re: tuning q for 730 ecm
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 7747 spark control questions.
- From: "Programmer" <nwester@eidnet.org>
- Re: ecm's
- From: Shannen Durphey <shannen@grolen.com>
- Fw: Oxygen Sensor Replacement - Try A Redundant Ground Lead
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: ecm's
- From: "Edmond" <euro@lvcm.com>
- Re: ecm's
- Re: 7747 spark control questions.
- From: Shannen Durphey <shannen@grolen.com>
- Re: two new papers, '747 stuff.
- Re: 7747 spark control questions.
- From: Shannen Durphey <shannen@grolen.com>
- Re: two new papers, '747 stuff.
- From: Shannen Durphey <shannen@grolen.com>
- Re: tuning q for 730 ecm
- Re: 7747 spark control questions.
- From: rr <RRauscher@nni.com>
- Re: tuning q for 730 ecm
- Re: 7747 spark control questions.
- Re: 7747 spark control questions.
- From: rr <RRauscher@nni.com>
- Re: ecm's
- Re: 7747 spark control questions.
- From: rr <RRauscher@nni.com>
- Re: 7747 spark control questions.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: tuning q for 730 ecm
- From: "Dave Zug" <dzug@delanet.com>
- Re: tuning q for 730 ecm
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 7747 spark control questions.
- From: Shannen Durphey <shannen@grolen.com>
- Re: tuning q for 730 ecm
- From: "Dave Zug" <dzug@delanet.com>
- GN injector offset
- From: Scott & Jennifer Peitzsch <jlg-sep@mediaone.net>
- Re: tuning q for 730 ecm
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 7747 spark control questions.
- From: "Kevin R" <KEReyn@gte.net>
- Re: tuning q for 730 ecm
- From: timsiford@hushmail.com
- Re: tuning q for 730 ecm
- From: "Edmond" <euro@lvcm.com>
- Re: GN injector offset
- From: Roger Heflin <rah@horizon.hit.net>
- Re: GN injector offset
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: GN injector offset
- From: Carl Ijames <ijames@netaxs.com>
- Re: Spark advance tuning made simple and quick?
- Re: GN injector offset
- From: Roger Heflin <rah@horizon.hit.net>
- AKFU bin
- From: "Programmer" <nwester@eidnet.org>
- Re: tuning q for 730 ecm
- From: "Programmer" <nwester@eidnet.org>
- 749 ( typhoon ) Code in a 730 ECU with a V8
- From: Gorden Jennings <gjennings@extremenetworks.com>
- Re: 7747 spark control questions.
- From: "Programmer" <nwester@eidnet.org>
- Re: ecm's
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: 7747 spark control questions.
- Re: GN injector offset
- From: John_Calabrese@ENGELHARD.COM
- Re: GN injector offset
- From: Scott Peitzsch <jlg-sep@mediaone.net>
- Re: GN injector offset
- From: Scott Peitzsch <jlg-sep@mediaone.net>
- Re: GN injector offset
- From: Scott Peitzsch <jlg-sep@mediaone.net>
- Re: GN injector offset
- From: Carl Ijames <ijames@netaxs.com>
- Hmm....
- From: "Edmond" <euro@lvcm.com>
- ALDL Connector
- From: "Swayze" <kswayze@bellsouth.net>
- Hrm...
- From: "NRGZ28" <digitalz28@hotmail.com>
- Caddy-Olds TB
- From: "Swayze" <kswayze@bellsouth.net>
- new paper
- From: steve ravet <sravet@arm.com>
- Re: 7747 spark control questions.
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: 7747 spark control questions.
- From: "Walter Sherwin" <wsherwin@home.com>
- Problem with 3.1V6 (Ignition related)
- From: "Scott Feaver" <scott@j-body.com>
- ALDL Connector
- From: "Mike Swayze" <mswayze@truswood.com>
- Hypertech type carrier
- Caddy-Olds TB
- From: "Mike Swayze" <mswayze@truswood.com>
- Re: GN injector offset
- From: Scott Peitzsch <jlg-sep@mediaone.net>
- Re: GN injector offset
- From: Scott Peitzsch <jlg-sep@mediaone.net>
- 700R4 rebuild document
- From: "Ed Hilker" <afn14222@afn.org>
- Re: GN injector offset
- From: Scott Peitzsch <jlg-sep@mediaone.net>
- Re: GN injector offset
- From: Len Sabatine <sabatine@epix.net>
- Re: 7747 spark control questions.
- From: Squash <realsquash@yahoo.com>
- Re: ALDL stream recycle time
- From: "Dave Zug" <dzug@delanet.com>
- Re: tuning q for 730 ecm
- From: David Cooley <n5xmt@triad.rr.com>
- Re: tuning q for 730 ecm
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 7747 spark control questions.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 749 ( typhoon ) Code in a 730 ECU with a V8
- From: timsiford@hushmail.com
- RE: Hmm....
- From: Don.F.Broadus@ucm.com
- 1227727 INJ.DRV.
- From: "Swayze" <kswayze@bellsouth.net>
- Re: 7747 spark control questions.
- From: Squash <realsquash@yahoo.com>
- Re: 7747 spark control questions.
- From: Squash <realsquash@yahoo.com>
- Re: GN injector offset
- From: Carl Ijames <ijames@netaxs.com>
- Re: 7747 spark control questions.
- From: Squash <realsquash@yahoo.com>
- Hypertech connector
- Re: GN injector offset
- From: John_Calabrese@ENGELHARD.COM
- Re: Hypertech connector
- From: David Cooley <n5xmt@triad.rr.com>
- RE: Hmm....
- From: Squash <realsquash@yahoo.com>
- Re: 1227727 INJ.DRV.
- From: Squash <realsquash@yahoo.com>
- Re: 700R4 rebuild document
- From: "Swayze" <kswayze@bellsouth.net>
- Problem with 3.1V6 (Ignition related)
- From: "Scott Feaver" <scott@j-body.com>
- RE: Hmm....
- From: Don.F.Broadus@ucm.com
- Re: 1227727 INJ.DRV.
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Problem with 3.1V6 (Ignition related)
- Re: 7747 spark control questions.
- From: "Kevin R" <KEReyn@gte.net>
- Re: 7747 spark control questions.
- From: Shannen Durphey <shannen@grolen.com>
- Re: Problem with 3.1V6 (Ignition related)
- From: Shannen Durphey <shannen@grolen.com>
- Re: 749 ( typhoon ) Code in a 730 ECU with a V8
- From: Shannen Durphey <shannen@grolen.com>
- Re: GN injector offset
- From: Carl Ijames <ijames@netaxs.com>
- RE: 749 ( typhoon ) Code in a 730 ECU with a V8
- From: "Gorden Jennings" <gjennings@ixpres.com>
- Re: 700R4 rebuild document
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 7747 spark control questions.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 749 ( typhoon ) Code in a 730 ECU with a V8
- Re: AKFU bin
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: 749 ( typhoon ) Code in a 730 ECU with a V8
- From: "Gorden Jennings" <gjennings@ixpres.com>
- Re: 1227727 INJ.DRV.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 7747 spark control questions.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 749 ( typhoon ) Code in a 730 ECU with a V8
- From: chetwagner@uswest.net
- Re: AKFU bin
- From: "Programmer" <nwester@eidnet.org>
- Re: 749 ( typhoon ) Code in a 730 ECU with a V8
- From: "Jon Fedock" <Galadar@worldnet.att.net>
- Re: 7747 spark control questions.
- From: Squash <realsquash@yahoo.com>
- Re: 7747 spark control questions.
- From: Squash <realsquash@yahoo.com>
- Re: GN injector offset
- From: John_Calabrese@ENGELHARD.COM
- Re: Problem with 3.1V6 (Ignition related)
- From: sapearso@collins.rockwell.com
- Re: Problem with 3.1V6 (Ignition related)
- From: "Mike" <kswayze@bellsouth.net>
- Re: 7747 spark control questions.
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: ecm's
- From: "Techie" <euro@lvcm.com>
- RE: 1227727 INJ.DRV.
- From: Don.F.Broadus@ucm.com
- Re: tuning q for 730 ecm
- From: "Programmer" <nwester@eidnet.org>
- Re: 7747 spark control questions.
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Problem with 3.1V6 (Ignition related)
- From: "Scott Feaver" <scott@j-body.com>
- Re: Problem with 3.1V6 (Ignition related)
- From: "Programmer" <nwester@eidnet.org>
- Re: Problem with 3.1V6 (Ignition related)
- From: "Bruce Plecan" <nacelp@bright.net>
- 3.1 v6 in Chevy Lumina 1227727 ecm with AMAS 7004 PROM
- From: "Lafferty, John" <John.Lafferty@camcare.com>
- Re: Problem with 3.1V6 (Ignition related)
- From: "Jeff M" <tystorm@email.msn.com>
- Re: 3.1 v6 in Chevy Lumina 1227727 ecm with AMAS 7004 PROM
- Re: Problem with 3.1V6 (Ignition related)
- RE: 3.1 v6 in Chevy Lumina 1227727 ecm with AMAS 7004 PROM
- From: "Lafferty, John" <John.Lafferty@camcare.com>
- Re: 3.1 v6 in Chevy Lumina 1227727 ecm with AMAS 7004 PROM
- Utility testers needed...
- From: Anders Hogrelius SdU <elt96ahs@mds.mdh.se>
- Possible error at CSH, HQ
- From: "Bruce Plecan" <nacelp@bright.net>
- Laptop Question
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Laptop Question
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Laptop Question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Laptop Question
- From: "Jeffrey Scott" <jws6367@lycos.com>
- Re: 7747 spark control questions.
- From: Shannen Durphey <shannen@grolen.com>
- Re: Laptop Question
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: new paper
- From: "Dave Zug" <dzug@delanet.com>
- Application for ASCP bin?
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Application for ASCP bin?
- From: "Bruce Plecan" <nacelp@bright.net>
- Radiator hose
- From: "Andrew Plunkett" <aplunkett@home.com>
- Fun with OTC 4000, and 2 questions...
- Re: Fun with OTC 4000, and 2 questions...
- From: "Bruce Plecan" <nacelp@bright.net>
- Automotive Oscilloscope
- From: "Daniel Collins" <bossute@one.net.au>
- Re: Application for ASCP bin?
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Automotive Oscilloscope
- From: Shawn Lin <slin01@mail.orion.org>
- Re: 7747 spark control questions.
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Application for ASCP bin?
- Re: Application for ASCP bin?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 7747 spark control questions.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Automotive Oscilloscope
- Re: Automotive Oscilloscope
- '747 IAC idle reset
- From: rr <RRauscher@nni.com>
- Re: Scam?
- Re: Automotive Oscilloscope
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Scam?
- From: "Walter Sherwin" <wsherwin@home.com>
- RE: Scam?
- From: Reid Bishop <rbish@ibm.net>
- Re: Scam?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Scam?
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Scam?
- From: "Swayze" <kswayze@bellsouth.net>
- ancient Dos laptops
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Scam?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Application for ASCP bin?
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Scam?
- From: rr <RRauscher@nni.com>
- Re: Application for ASCP bin?
- From: "Bruce Plecan" <nacelp@bright.net>
- More on '747 IAC & idle
- From: rr <RRauscher@nni.com>
- Re: ancient Dos laptops
- From: rr <RRauscher@nni.com>
- Re: Application for ASCP bin?
- From: rr <RRauscher@nni.com>
- Re: Application for ASCP bin?
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Application for ASCP bin?
- From: Roger Heflin <rah@horizon.hit.net>
- Re: ancient Dos laptops
- From: Thomas McCabe <mccabet@mediaone.net>
- Re: Scam?
- From: "Walter Sherwin" <wsherwin@home.com>
- Tuning for new injectors
- From: Scott & Jennifer Peitzsch <jlg-sep@mediaone.net>
- Re: Tuning for new injectors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Scam?
- From: Shannen Durphey <shannen@grolen.com>
- Re: Scam?
- From: rr <RRauscher@nni.com>
- Re: Scam?
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Scam?
- Re: Automotive Oscilloscope
- From: bedgeworth@uswest.net
- Re: Lockup converters. tuning q for 730 ecm
- From: Tom Sharpe <twsharpe@mtco.com>
- TPI 5.7L and SVO injectors
- From: "Dave Zug" <dzug@delanet.com>
- Re: TPI 5.7L and SVO injectors
- Need a bin. 3.1L V6 DIS manual transmission
- From: "TK" <terryk@foothill.net>
- Re: Need a bin. 3.1L V6 DIS manual transmission
- From: Shannen Durphey <shannen@grolen.com>
- Re: Need a bin. 3.1L V6 DIS manual transmission
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: TPI 5.7L and SVO injectors
- From: timsiford@hushmail.com
- Re: Need a bin. 3.1L V6 DIS manual transmission
- From: "TK" <terryk@foothill.net>
- Re: 7747 spark control questions.
- From: Len Sabatine <sabatine@epix.net>
- Re: Application for ASCP bin?
- From: Len Sabatine <sabatine@epix.net>
- Re: TPI 5.7L and SVO injectors
- From: "Dave Zug" <dzug@delanet.com>
- Re: TPI 5.7L and SVO injectors
- From: timsiford@hushmail.com
- Re: TPI 5.7L and SVO injectors
- From: "Bruce Plecan" <nacelp@bright.net>
- $6D editors
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: $6D editors
- Re: $6D editors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Laptop Question
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: $6D editors
- From: "NRG" <euro@lvcm.com>
- Re: Laptop Question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Laptop Question
- From: Roger Heflin <rah@horizon.hit.net>
- RE: Laptop Question
- From: "Craig Marcho" <marcho@flash.net>
- Quick question
- From: "NRG" <euro@lvcm.com>
- Re: TPI 5.7L and SVO injectors
- Re: Fun with OTC 4000, and 2 questions...
- Re: Need a bin. 3.1L V6 DIS manual transmission
- From: "TK" <terryk@foothill.net>
- Re: Fun with OTC 4000, and 2 questions...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Laptop Question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Laptop Question
- Re: Laptop Question
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Need a bin. 3.1L V6 DIS manual transmission
- From: Shannen Durphey <shannen@grolen.com>
- Re: Quick question
- From: Shannen Durphey <shannen@grolen.com>
- Re: TPI 5.7L and SVO injectors
- Re: Laptop Question
- From: "TK" <terryk@foothill.net>
- Re: Need a bin. 3.1L V6 DIS manual transmission
- From: "TK" <terryk@foothill.net>
- Re: Laptop Question
- From: Len Sabatine <sabatine@epix.net>
- Re: Laptop Question
- From: "NRG" <euro@lvcm.com>
- Re: Laptop Question
- From: sapearso@collins.rockwell.com
- 700R4
- From: sapearso@collins.rockwell.com
- Re: Laptop Question
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Need a bin. 3.1L V6 DIS manual transmission
- From: Shannen Durphey <shannen@grolen.com>
- Re: Laptop Question
- Re: 700R4
- From: Bob Valentine <bob@tecmark.com>
- Re: Quick question
- From: "Dave Zug" <dzug@delanet.com>
- Relocating IAT sensor?
- Re: Relocating IAT sensor?
- From: "Dave Zug" <dzug@delanet.com>
- Re: Relocating IAT sensor?
- ecm and diacom help needed
- Re: Relocating IAT sensor?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Relocating IAT sensor?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ecm and diacom help needed
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Relocating IAT sensor?
- Re: ecm and diacom help needed
- 730 ECM
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: 730 ECM
- From: frels@rosharon.camco.slb.com (Mike Frels)
- Re:memcals
- Re: memcals
- RE: Quick question
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: 730 ECM
- From: steve ravet <sravet@arm.com>
- RE: 730 ECM
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: 730 ECM
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Relocating IAT sensor?
- From: rr <RRauscher@nni.com>
- Re: Quick question
- From: "Dave Zug" <dzug@delanet.com>
- Re: Relocating IAT sensor?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: memcals
- From: Shannen Durphey <shannen@grolen.com>
- Re: memcals
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: memcals
- New Version of CarChat 2.2b
- From: Rob Berg <rgberg@srv.net>
- Re: Relocating IAT sensor?
- From: rr <RRauscher@nni.com>
- Re: Need a bin. 3.1L V6 DIS manual transmission
- From: "TK" <terryk@foothill.net>
- Re: ecm and diacom help needed
- From: "TK" <terryk@foothill.net>
- Re: New Version of CarChat 2.2b
- From: Jason Weir <jweir@nc.rr.com>
- Re: Relocating IAT sensor?
- From: "Mike" <kswayze@bellsouth.net>
- Re: Laptop Question
- From: "Mike" <kswayze@bellsouth.net>
- Re: Relocating IAT sensor?
- From: "Mike" <kswayze@bellsouth.net>
- RE: Laptop Question
- From: "mike rolica" <97005620@lambton.on.ca>
- Re: Speed sensor question
- Re: Laptop Question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Quick question
- From: Ludis Langens <ludis@cruzers.com>
- Re: Relocating IAT sensor?
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- RE: ecm and diacom help needed
- From: "Guenther, Max [ASCO/PA]" <Mguenther@ASCO.COM>
- initial timing
- Re: initial timing
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Relocating IAT sensor?
- From: "Bruce Plecan" <nacelp@bright.net>
- BLM ON 165
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: initial timing
- From: timsiford@hushmail.com
- Injector Pricing was RE: initial timing
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- EPROM carrier
- A few newbie questions...
- From: "Rex Weatherford" <rexweatherford@home.com>
- Re: EPROM carrier
- From: "NRG" <euro@lvcm.com>
- Re: Speed sensor question
- From: chetwagner@uswest.net
- Gas mileage and headers
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: A few newbie questions...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: A few newbie questions...
- From: "Rex Weatherford" <rexweatherford@home.com>
- Re: A few newbie questions...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Gas mileage and headers
- From: frels@rosharon.camco.slb.com (Mike Frels)
- 88h & hi-way stuff
- From: rr <RRauscher@nni.com>
- Re: 88h & hi-way stuff
- From: "Kevin R" <KEReyn@gte.net>
- Re: Gas mileage and headers
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 88h & hi-way stuff
- From: rr <RRauscher@nni.com>
- Mask 42 Highway fuel
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TPI 5.7L and SVO injectors
- From: "Dave Zug" <dzug@delanet.com>
- P&H interface
- From: "Mike" <kswayze@bellsouth.net>
- Hair Pulling .ECU file problem
- From: Peter Gargano <peter@techedge.com.au>
- Re: Hair Pulling .ECU file problem
- From: "Mike" <kswayze@bellsouth.net>
- Re: Hair Pulling .ECU file problem
- From: "David Papworth" <papworth@ichips.intel.com>
- Modifying a speedo for TTL ECM 4K vs VSS generator input
- From: "TK" <terryk@foothill.net>
- Re: Hair Pulling .ECU file problem
- From: Peter Gargano <peter@techedge.com.au>
- Pontiac Supercharged 3.8L
- From: "Daniel Collins" <bossute@one.net.au>
- Am I going the wrong direction ?
- From: "NRG" <euro@lvcm.com>
- Re: Am I going the wrong direction ?
- RE: Gas mileage and headers
- From: "Guenther, Max [ASCO/PA]" <Mguenther@ASCO.COM>
- Re: 88h & hi-way stuff
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: 88h & hi-way stuff
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Running a 88-89 W car PROM in a 90 T(Lumina) with 3.1 v6
- From: "Lafferty, John" <John.Lafferty@camcare.com>
- Re: Pontiac Supercharged 3.8L
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: TPI 5.7L and SVO injectors
- From: timsiford@hushmail.com
- Re: Am I going the wrong direction ?
- From: timsiford@hushmail.com
- Re: Pontiac Supercharged 3.8L
- From: "Daniel Collins" <bossute@one.net.au>
- Re: Am I going the wrong direction ?
- Re: Am I going the wrong direction ?
- From: Len Sabatine <sabatine@epix.net>
- RE: Gas mileage and headers
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Gas mileage and headers
- From: John_Calabrese@ENGELHARD.COM
- RE: Gas mileage and headers
- From: Len Sabatine <sabatine@epix.net>
- RE: Gas mileage and headers
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: 88h & hi-way stuff
- From: chetwagner@uswest.net
- Re: Gas mileage and headers
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Gas mileage and headers
- From: "Programmer" <nwester@eidnet.org>
- Re: 88h & hi-way stuff
- RE: Gas mileage and headers
- From: "Guenther, Max [ASCO/PA]" <Mguenther@ASCO.COM>
- RE: Gas mileage and headers
- From: John_Calabrese@ENGELHARD.COM
- Re: Gas mileage and headers
- From: "Chris Bennight" <Christopher_Bennight@baylor.edu>
- petrol tank venting ecu control
- From: Dave Evans <dave@lotuscarlton.demon.co.uk>
- Re: Gas mileage and headers
- From: John_Calabrese@ENGELHARD.COM
- Re: petrol tank venting ecu control
- From: rr <RRauscher@nni.com>
- RE: Gas mileage and headers
- From: Bob Valentine <bob@tecmark.com>
- RE: Running a 88-89 W car PROM in a 90 T(Lumina) with 3.1 v6
- From: "David Papworth" <papworth@ichips.intel.com>
- Re: petrol tank venting ecu control
- Confusion
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Confusion
- From: Ludis Langens <ludis@cruzers.com>
- Re: Confusion
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Confusion
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Confusion
- From: "Lou" <lfaustini@atlantech.net>
- Re: Confusion
- From: "Dan Townsend" <xybertron@cox-internet.com>
- EPROM question
- Re: Confusion
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Confusion
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: GMECM Diges
- From: sapearso@collins.rockwell.com
- Different approach to VSS question
- From: "TK" <terryk@foothill.net>
- Re: GMECM Diges
- From: "TK" <terryk@foothill.net>
- Re: Pontiac Supercharged 3.8L
- From: "TK" <terryk@foothill.net>
- MAP voltage to kpa
- From: Bob Valentine <bob@tecmark.com>
- RE: Gas mileage and headers
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Gas mileage and headers
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: EPROM Question
- From: Dig <turbodig@yahoo.com>
- RE: Gas mileage and headers
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: Confusion
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: MAP voltage to kpa
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: EPROM Question
- Low power 5.0 TPI
- From: "Programmer" <nwester@eidnet.org>
- Re: Low power 5.0 TPI
- From: timsiford@hushmail.com
- Min idle
- From: "Bruce Plecan" <nacelp@bright.net>
- Need small IAC
- From: Eric Norgard <eric@aztek-eng.com>
- Re: Need small IAC
- From: "Swayze" <kswayze@bellsouth.net>
- Gas mileage saga continues (Sorry, QUITE LONG)
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Low power 5.0 TPI
- Re: Need small IAC
- From: Eric Norgard <eric@aztek-eng.com>
- RE: Low power 5.0 TPI
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Stock Calpak question
- From: "Craig Marcho" <not_valid_email@airmail.net>
- Re: Stock Calpak question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Stock Calpak question
- From: Gabe <gellett@earthlink.net>
- Re: Low power 5.0 TPI
- From: "Programmer" <nwester@eidnet.org>
- Re: Stock Calpak question
- Re: Low power 5.0 TPI
- From: rr <RRauscher@nni.com>
- Re: Different approach to VSS question
- From: rr <RRauscher@nni.com>
- Re: Stock Calpak question
- From: "Bruce Plecan" <nacelp@bright.net>
- Prom Question
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Different approach to VSS question
- From: Ludis Langens <ludis@cruzers.com>
- Re: Stock Calpak question
- From: Ludis Langens <ludis@cruzers.com>
- Re: Prom Question
- From: Ludis Langens <ludis@cruzers.com>
- Re: Prom Question
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Stock Calpak question
- From: Greg Westphal <gcwestph@erols.com>
- RE: Gas mileage and headers
- From: Carl Ijames <ijames@netaxs.com>
- Re: Prom Question
- From: "Bruce Plecan" <nacelp@bright.net>
- Fw: Explorer problems
- From: "Bruce Plecan" <nacelp@bright.net>
- Fw: [ma] Sad note
- From: "Dave Zug" <dzug@delanet.com>
- List of Lists
- From: "Dave Zug" <dzug@delanet.com>
- Re: Am I going the wrong direction ?
- From: "NRG" <euro@lvcm.com>
- Re: Am I going the wrong direction ?
- From: "NRG" <euro@lvcm.com>
- Re: Am I going the wrong direction ?
- From: "NRG" <euro@lvcm.com>
- Re: Low power 5.0 TPI
- From: "Programmer" <nwester@eidnet.org>
- Re: Need small IAC
- From: Bob Valentine <bob@tecmark.com>
- Re: List of Lists
- Re: Am I going the wrong direction ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Low power 5.0 TPI
- Re: Min idle
- Re: Min idle
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Min idle
- From: Roger Heflin <rah@horizon.hit.net>
- 165 ECU File
- From: "NRG" <euro@lvcm.com>
- Re: Min idle
- From: rr <RRauscher@nni.com>
- Re: Am I going the wrong direction ?
- From: Len Sabatine <sabatine@epix.net>
- Re: Am I going the wrong direction ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 165 ECU File
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 165 ECU File
- From: "NRG" <euro@lvcm.com>
- Re: Am I going the wrong direction ?
- From: Len Sabatine <sabatine@epix.net>
- Re: List of Lists
- From: "Mike" <kswayze@bellsouth.net>
- Re: 165 ECU File
- From: Len Sabatine <sabatine@epix.net>
- Re: Am I going the wrong direction ?
- From: "NRG" <euro@lvcm.com>
- Re: 165 ECU File
- From: "Craig Moates" <craig.moates@home.com>
- Re: 165 ECU File
- From: "NRG" <euro@lvcm.com>
- Re: 165 ECU File
- From: "Programmer" <nwester@eidnet.org>
- Re: Gas mileage saga continues (Sorry, QUITE LONG)
- Re: 165 ECU File
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 165 ECU File
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Diacom Runs
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Diacom Runs
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 165 ECU File
- From: "NRG" <euro@lvcm.com>
- Re: 165 ECU File
- From: "NRG" <euro@lvcm.com>
- Re: Auto vs. man for TA MAF setup
- RE: 165 ECU File
- From: Tim Welden <twelden@evolving.com>
- Re: Am I going the wrong direction ?
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Re: Am I going the wrong direction ?
- From: "NRG" <euro@lvcm.com>
- Re: Driver Boards
- Re: 88h & hi-way stuff
- From: rr <RRauscher@nni.com>
- Re: 165 ECU File
- From: Len Sabatine <sabatine@epix.net>
- Re: Am I going the wrong direction ?
- From: Len Sabatine <sabatine@epix.net>
- Gen Info
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Am I going the wrong direction ?
- From: "Craig Moates" <craig.moates@home.com>
- Re: Auto vs. man for TA MAF setup
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Diacom Runs
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Diacom Runs
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Diacom Runs
- From: Roger Heflin <rah@horizon.hit.net>
- Fw: TeamZR1 ECM - Class V - Lets cook TM's L89 code
- From: romans@starstream.net (Romans, Mark)
- Re: 165 ECU File
- From: "Programmer" <nwester@eidnet.org>
- Re: 165 ECU File
- From: "Programmer" <nwester@eidnet.org>
- Re: List of Lists
- Oops...was Re: List of Lists
- Re: 165 ECU File
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: 165 ECU File
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 165 ECU File
- From: timsiford@hushmail.com
- Re: 165 ECU File
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: 165 ECU File
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: 165 ECU File
- From: timsiford@hushmail.com
- Re: 165 ECU File
- From: timsiford@hushmail.com
- 749 O/L idle help needed.....
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: 749 O/L idle help needed.....
- From: "David Papworth" <papworth@ichips.intel.com>
- Re: 749 O/L idle help needed.....
- From: "Dave Zug" <dzug@delanet.com>
- Re: 749 O/L idle help needed.....
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 749 O/L idle help needed.....
- From: Barry Tisdale <btisdale@cybersol.com>
- 30 lb FMS Injector ??'s
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Bin Archive web site
- From: "NRG" <euro@lvcm.com>
- RE: 30 lb FMS Injector ??'s
- From: "Rodney Fulk" <elixir@pathwaynet.com>
- Re: 30 lb FMS Injector ??'s
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 749 O/L idle help needed.....
- From: "David Papworth" <papworth@ichips.intel.com>
- Re: 749 O/L idle help needed.....
- From: "David Papworth" <papworth@ichips.intel.com>
- Re:head gasket
- Re: 749 O/L idle help needed.....
- From: "David Papworth" <papworth@ichips.intel.com>
- DFCO Questions.
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Newbie help
- From: Ludis Langens <ludis@cruzers.com>
- Re: P&H interface
- From: Ludis Langens <ludis@cruzers.com>
- Re: ALDL stream recycle time
- From: Ludis Langens <ludis@cruzers.com>
- Re: Speed sensor question
- From: Ludis Langens <ludis@cruzers.com>
- Re: DFCO Questions.
- From: Ludis Langens <ludis@cruzers.com>
- Re: 30 lb FMS Injector ??'s
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: ALDL stream recycle time
- From: "Dave Zug." <dzug@delanet.com>
- Re: 30 lb FMS Injector ??'s
- From: Len Sabatine <sabatine@epix.net>
- Re: 30 lb FMS Injector ??'s
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 30 lb FMS Injector ??'s
- From: timsiford@hushmail.com
- Re: ALDL stream recycle time
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Speed sensor question
- Re: 30 lb FMS Injector ??'s
- From: "Chris Bennight" <Christopher_Bennight@baylor.edu>
- Re: 30 lb FMS Injector ??'s
- From: "Dan Townsend" <xybertron@cox-internet.com>
- High Idle Question
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: Re:head gasket
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Low power 5.0 TPI
- From: "Programmer" <nwester@eidnet.org>
- Re: 30 lb FMS Injector ??'s
- From: timsiford@hushmail.com
- RE: Re:head gasket
- From: don.broadus@exeloncorp.com
- Re: Buick GN ECM on Ebay
- Re: 30 lb FMS Injector ??'s
- From: Andrew Mattei <amattei@mindspring.com>
- Re: Re:head gasket
- From: romans@starstream.net (Romans, Mark)
- Re: 30 lb FMS Injector ??'s
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: 30 lb FMS Injector ??'s
- From: timsiford@hushmail.com
- Re: 30 lb FMS Injector ??'s
- From: Andrew Mattei <amattei@mindspring.com>
- Re: 30 lb FMS Injector ??'s
- From: Len Sabatine <sabatine@epix.net>
- Re: 30 lb FMS Injector ??'s
- From: timsiford@hushmail.com
- Re: 30 lb FMS Injector ??'s
- From: "Mark S. Riley" <turbotuneusltd@triad.rr.com>
- Holley 502-1 tbi system
- From: "Diane Stowe" <DianeS@speakeasy.org>
- Re: 30 lb FMS Injector ??'s
- From: Len Sabatine <sabatine@epix.net>
- Re: Holley 502-1 tbi system
- From: John_Calabrese@ENGELHARD.COM
- Re: Holley 502-1 tbi system
- From: "Diane Stowe" <DianeS@speakeasy.org>
- Re: 30 lb FMS Injector ??'s
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Re:head gasket
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: High Idle Question
- From: Squash <realsquash@yahoo.com>
- $5D .ecu file (1227808 MAP, 4/6/8)
- From: Peter Gargano <peter@techedge.com.au>
- Re: Low power 5.0 TPI
- From: rr <RRauscher@nni.com>
- RE: 30 lb FMS Injector ??'s
- From: "Rodney Fulk" <elixir@pathwaynet.com>
- Re: Low power 5.0 TPI
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ALDL stream recycle time
- From: "Dave Zug" <dzug@delanet.com>
- 2 bar 730 V8 was: Re: ALDL stream recycle time
- From: "Dave Zug" <dzug@delanet.com>
- Re: Re:head gasket
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: 2 bar 730 V8 was: Re: ALDL stream recycle time
- From: "Bruce Plecan" <nacelp@bright.net>
- 730 ECM Swap
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Low power 5.0 TPI
- From: "Programmer" <nwester@eidnet.org>
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: 730 ECM Swap
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 749 O/L idle help needed
- From: Dig <turbodig@yahoo.com>
- Re: 730 ECM Swap
- Re: 749 O/L idle help needed
- From: rr <RRauscher@nni.com>
- Re: 730 ECM Swap
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: 730 ECM Swap
- From: Ludis Langens <ludis@cruzers.com>
- MemCals Needing a Good Home...
- From: frels@rosharon.camco.slb.com (Mike Frels)
- Re: 730 ECM Swap
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Re: 730 ECM Swap
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: 730 ECM Swap
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ALDL stream recycle time
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: 2 bar 730 V8 was: Re: ALDL stream recycle time
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- RE: Gas mileage saga continues (Sorry, QUITE LONG)
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Gas mileage saga UPDATE (long again, sorry)
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Gas mileage saga continues (Sorry, QUITE LONG)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Buick GN ECM on Ebay
- RealTime on-the-fly modifications of code
- From: timsiford@hushmail.com
- Re: RealTime on-the-fly modifications of code
- From: "Bruce Plecan" <nacelp@bright.net>
- '747 + 6 Cyl + Turbo?
- From: "Shane Forster" <shane@nanosecond.com>
- RE: Gas mileage saga continues (Sorry, QUITE LONG)
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Buick GN ECM on Ebay
- From: Keith <kgil1@tampabay.rr.com>
- Re: RealTime on-the-fly modifications of code
- From: "Swayze" <kswayze@bellsouth.net>
- Halloween HEX Patches
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Halloween HEX Patches
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: ALDL stream recycle time
- From: "Dave Zug" <dzug@delanet.com>
- Re: 730 ECM Swap
- From: romans@starstream.net (Romans, Mark)
- Re: Halloween HEX Patches
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: 730 ECM Swap
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Buick GN ECM on Ebay
- Re: Buick GN ECM on Ebay
- From: DC Smith <morepoweral@tetranet.net>
- Re: MemCals Needing a Good Home...
- '749 Promgrammer updates
- From: Dig <turbodig@yahoo.com>
- Any Advice on Shorty Plugs?
- Re: Any Advice on Shorty Plugs?
- From: "NRG" <euro@lvcm.com>
- Call for standards: EPROM/cal editing software
- From: Dig <turbodig@yahoo.com>
- Re: Halloween HEX Patches
- From: "Programmer" <nwester@eidnet.org>
- Missing guy
- From: "Programmer" <nwester@eidnet.org>
- Re: Missing guy
- From: "TK" <terryk@foothill.net>
- WinBin vs PromEdit - problem with "mulOrDivOrBit"
- From: Peter Gargano <peter@techedge.com.au>
- Re: Call for standards: EPROM/cal editing software
- From: Peter Gargano <peter@techedge.com.au>
- Re: Call for standards: EPROM/cal editing software
- Re: '749 Promgrammer updates
- From: Robert Bianchi <rjbianchi@yahoo.com>
- Re: Call for standards: EPROM/cal editing software
- From: Squash <realsquash@yahoo.com>
- Re: ALDL stream recycle time
- From: "John S. Gwynne" <jsg@jsgpc.mrcday.com>
- Re: '747 + 6 Cyl + Turbo?
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: WinBin vs PromEdit - problem with "mulOrDivOrBit"
- From: Eric Aos <EOA@spartek.com>
- RE: WinBin vs PromEdit - problem with "mulOrDivOrBit"
- From: Carl Ijames <ijames@netaxs.com>
- RE: WinBin vs PromEdit - problem with "mulOrDivOrBit"
- From: Eric Aos <EOA@spartek.com>
- Re: 730 ECM Swap
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Driver board group buy closed.
- RE: WinBin vs PromEdit - problem with "mulOrDivOrBit"
- From: "David Papworth" <papworth@ichips.intel.com>
- Re: 730 ECM Swap
- Adding another O2 sensor
- From: timsiford@hushmail.com
- RE: Gas mileage saga continues (Sorry, QUITE LONG)
- From: chetwagner@uswest.net
- Re: '747 + 6 Cyl + Turbo?
- From: chetwagner@uswest.net
- Re: Adding another O2 sensor
- From: "Swayze" <kswayze@bellsouth.net>
- When is a heated 02 sensor necessary ?
- From: "Edmond" <euro@lvcm.com>
- Re: Call for standards: EPROM/cal editing software
- From: Ludis Langens <ludis@cruzers.com>
- Re: When is a heated 02 sensor necessary ?
- From: David Cooley <n5xmt@triad.rr.com>
- Re: When is a heated 02 sensor necessary ?
- Re: When is a heated 02 sensor necessary ?
- From: timsiford@hushmail.com
- Re: '747 + 6 Cyl + Turbo?
- From: "Shane Forster" <shane@nanosecond.com>
- Re: Call for standards: EPROM/cal editing software
- From: timsiford@hushmail.com
- Re: When is a heated 02 sensor necessary ?
- From: timsiford@hushmail.com
- Re: When is a heated 02 sensor necessary ?
- From: "Edmond" <euro@lvcm.com>
- Re: When is a heated 02 sensor necessary ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: When is a heated 02 sensor necessary ?
- From: Squash <realsquash@yahoo.com>
- EGOR future...was(Autronic Questions)
- From: garwillis@msn.com (Garfield Willis)
- Re: Adding another O2 sensor
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: When is a heated 02 sensor necessary ?
- From: Bob Valentine <bob@tecmark.com>
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: Any Advice on Shorty Plugs?
- From: "Dave Zug" <dzug@delanet.com>
- Another WinBin question
- From: Carl Ijames <ijames@netaxs.com>
- Re: When is a heated 02 sensor necessary ?
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Missing guy
- From: "Dave Zug" <dzug@delanet.com>
- Re: ALDL stream recycle time
- From: "Dave Zug" <dzug@delanet.com>
- Re: Any Advice on Shorty Plugs?
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: Any Advice on Shorty Plugs?
- From: "Edmond" <euro@lvcm.com>
- Re: When is a heated 02 sensor necessary ?
- From: "Dave Zug" <dzug@delanet.com>
- Re: When is a heated 02 sensor necessary ?
- From: "Dave Zug" <dzug@delanet.com>
- Re: When is a heated 02 sensor necessary ?
- From: Squash <realsquash@yahoo.com>
- Re: Adding another O2 sensor
- From: "Dave Zug" <dzug@delanet.com>
- Re: Any Advice on Shorty Plugs?
- From: "Dave Zug" <dzug@delanet.com>
- Re: Adding another O2 sensor
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Any Advice on Shorty Plugs?
- From: "Dave Zug" <dzug@delanet.com>
- Re: Call for standards: EPROM/cal editing software
- From: "TK" <terryk@foothill.net>
- Re: Any Advice on Shorty Plugs?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Adding another O2 sensor
- From: Bob Valentine <bob@tecmark.com>
- Tuning 101
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Adding another O2 sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Missing guy
- From: "Programmer" <nwester@eidnet.org>
- Re: Missing guy
- From: "Programmer" <nwester@eidnet.org>
- Re: WinBin vs PromEdit - problem with "mulOrDivOrBit"
- From: "Programmer" <nwester@eidnet.org>
- Re: REALLY basic newbie ?'s
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Call for standards: EPROM/cal editing software
- From: "Programmer" <nwester@eidnet.org>
- Re: Tuning 101
- From: "Programmer" <nwester@eidnet.org>
- EGOR future... The Original EGOR and the commercial version
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Call for standards: EPROM/cal editing software
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Call for standards: EPROM/cal editing software
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Call for standards: EPROM/cal editing software
- From: "Daniel Collins" <bossute@one.net.au>
- HUD?
- From: "Mike" <kswayze@bellsouth.net>
- Re: Driver board group buy closed.
- From: "Dave & Irina Eicher" <sailors@mwci.net>
- Re: Adding another O2 sensor
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Call for standards: EPROM/cal editing software
- From: steve ravet <sravet@arm.com>
- Re: Adding another O2 sensor
- From: timsiford@hushmail.com
- Re: '747 + 6 Cyl + Turbo?
- Re: Adding another O2 sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Call for standards: EPROM/cal editing software
- From: timsiford@hushmail.com
- The Original DIY EGOR
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Call for standards: EPROM/cal editing software
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Call for standards: EPROM/cal editing software
- From: Eric Aos <EOA@spartek.com>
- RE: Another WinBin question
- From: Eric Aos <EOA@spartek.com>
- Re: '747 + 6 Cyl + Turbo?
- From: chetwagner@uswest.net
- Re: Call for standards: EPROM/cal editing software
- From: timsiford@hushmail.com
- Re: '747 + 6 Cyl + Turbo?
- From: "Shane Forster" <shane@nanosecond.com>
- Re: When is a heated 02 sensor necessary ?
- From: "Edmond" <euro@lvcm.com>
- Miniram Tip in Problem
- [no subject]
- From: "Mike Martone" <mmartone@popwff.gsfc.nasa.gov>
- LS1 - Flash - Reprogramming
- From: "Bob" <bobk@gscyclone.com>
- Re: LS1 - Flash - Reprogramming
- From: Andrew Mattei <amattei@mindspring.com>
- Backfire
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: HUD?
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Call for standards: EPROM/cal editing software
- From: "Swayze" <kswayze@bellsouth.net>
- Re: vette instrument cluster
- From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
- Re: LS1 - Flash - Reprogramming
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Backfire
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: LS1 - Flash - Reprogramming
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '747 + 6 Cyl + Turbo?
- Re: Missing guy
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '747 + 6 Cyl + Turbo?
- From: chetwagner@uswest.net
- Re: Backfire
- From: rr <RRauscher@nni.com>
- : Re: LS1 - Flash - Reprogramming
- From: Speartech <speartec@iquest.net>
- Re: '747 + 6 Cyl + Turbo?
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Re: LS1 - Flash - Reprogramming
- From: "Dave & Irina Eicher" <sailors@mwci.net>
- : Re: LS1 - Flash - Reprogramming
- From: Len Sabatine <sabatine@epix.net>
- Re: Re: LS1 - Flash - Reprogramming
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- 88-89 Turbo PFI 1.5L Isuzu
- From: Peter Gargano <peter@techedge.com.au>
- Big Injectors in Little Engine?
- From: "Craig Moates" <craig.moates@home.com>
- RE: Miniram Tip in Problem
- From: "Bob" <bobk@gscyclone.com>
- Re: C4 (vette) dash
- From: Red86 <henders@ameritech.net>
- Re: LS1 - Flash - Reprogramming
- Re: 88-89 Turbo PFI 1.5L Isuzu
- Bins to upload and need for prom info
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Missing guy
- From: "TK" <terryk@foothill.net>
- Re: Missing guy
- From: "TK" <terryk@foothill.net>
- Australian 1227808 ECU data for .ecu file
- From: "Roger Merritt" <rogermerritt@hotmail.com>
- Re: Call for standards: EPROM/cal editing
- From: Dig <turbodig@yahoo.com>
- Re: GMECM Digest V2 #589
- From: Dig <turbodig@yahoo.com>
- Re: LS1 - Flash - Reprogramming
- From: "Programmer" <nwester@eidnet.org>
- Re: Missing guy
- From: "Programmer" <nwester@eidnet.org>
- Re: Call for standards: EPROM/cal editing
- From: Dig <turbodig@yahoo.com>
- Re: Call for standards: EPROM/cal editing
- From: "TK" <terryk@foothill.net>
- Re: Call for standards: EPROM/cal editing
- From: "Programmer" <nwester@eidnet.org>
- Re: $5D .ecu file (1227808 MAP, 4/6/8)
- From: Peter Gargano <peter@techedge.com.au>
- Re: Call for standards: EPROM/cal editing
- RE: Call for standards: EPROM/cal editing
- From: "Warren Bowley" <gmecmml@cfl.rr.com>
- Elementary assembly lang question...
- From: Dale Klein <daklein@netzero.net>
- Re: Call for standards: EPROM/cal editing
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Miniram Tip in Problem
- MEFI 3.0
- From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
- Re: Missing guy
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: C4 (vette) dash
- From: "Mike Martone" <mmartone@popwff.gsfc.nasa.gov>
- Re: Call for standards: EPROM/cal editing
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Call for standards: EPROM/cal editing
- Re: MEFI 3.0
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Call for standards: EPROM/cal editing
- From: "Bruce Plecan" <nacelp@bright.net>
- Combo driver group buy "NAG list"
- Fw: Miniram Tip in Problem
- From: "Kevin R" <KEReyn@gte.net>
- Re: Miniram Tip in Problem
- RE: Gas mileage saga continues (Sorry, QUITE LONG)
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Call for standards: EPROM/cal editing
- RE: When is a heated 02 sensor necessary ?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: 730 ECM Swap
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Adding another O2 sensor
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Call for standards: EPROM/cal editing
- From: Len Sabatine <sabatine@epix.net>
- shipping addresses for driver board group buy
- From: David Rhoads II <rhoads@adi.com>
- RE: 730 ECM Swap
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: When is a heated 02 sensor necessary ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 ECM Swap
- RE: When is a heated 02 sensor necessary ?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Adding another O2 sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Adding another O2 sensor
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Adding another O2 sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Call for standards: EPROM/cal editing software
- From: "Paul Blackmore" <paul_blackmore@xtra.co.nz>
- Part number for heated o2
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: Missing guy
- From: Dig <turbodig@yahoo.com>
- Re: 730 ECM Swap
- Re: Call for standards: EPROM/cal editing software
- From: Peter Gargano <peter@techedge.com.au>
- Re: 730 ECM Swap
- From: Gabe <gellett@earthlink.net>
- History & $5D Calibration Information?
- From: Peter Gargano <peter@techedge.com.au>
- Re: Call for standards: EPROM/cal editing
- Re: 730 ECM Swap
- Re: History & $5D Calibration Information?
- From: "Bruce Plecan" <nacelp@bright.net>
- Engine Analyser
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Adding another O2 sensor
- From: rr <RRauscher@nni.com>
- mask 88h hac'd
- From: rr <RRauscher@nni.com>
- Re: 730 ECM Swap
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: 730 ECM Swap
- From: romans@starstream.net (Romans, Mark)
- Re: Part number for heated o2
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Part number for heated o2
- Re: History & $5D Calibration Information?
- From: Peter Gargano <peter@techedge.com.au>
- Re: Big Injectors in Little Engine?
- From: "Craig Moates" <craig.moates@home.com>
- Re: Part number for heated o2
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Big Injectors in Little Engine?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Big Injectors in Little Engine?
- From: "Chris P." <cp914@lvcm.com>
- Re: Big Injectors in Little Engine?
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: History & $5D Calibration Information?
- From: "Daniel Collins" <bossute@one.net.au>
- Re: Call for standards: EPROM/cal editing
- From: "Daniel Collins" <bossute@one.net.au>
- Re: Part number for heated o2
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Big Injectors in Little Engine?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: History & $5D Calibration Information?
- From: Peter Gargano <peter@techedge.com.au>
- Re: Part number for heated o2
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: History & $5D Calibration Information?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Big Injectors in Little Engine?
- From: "Bruce Plecan" <nacelp@bright.net>
- Edge board scanners
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: History & $5D Calibration Information?
- From: Peter Gargano <peter@techedge.com.au>
- Re: Edge board scanners
- From: Peter Gargano <peter@techedge.com.au>
- RE: Call for standards: EPROM/cal editing software
- From: "Warren Bowley" <gmecmml@cfl.rr.com>
- Re: Edge board scanners
- From: Carl Ijames <ijames@netaxs.com>
- Re: Call for standards: EPROM/cal editing
- From: "TK" <terryk@foothill.net>
- Re: Call for standards: EPROM/cal editing
- From: "TK" <terryk@foothill.net>
- Re: Edge board scanners
- From: Peter Gargano <peter@techedge.com.au>
- Re: Call for standards: EPROM/cal editing
- From: garwillis@msn.com (Garfield Willis)
- New Prom
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Part number for heated o2
- From: Shawn Lin <slin01@mail.orion.org>
- Re: History & $5D Calibration Information?
- From: "Daniel Collins" <bossute@one.net.au>
- Re: MEFI 3.0
- From: Speartech <speartec@iquest.net>
- Re: New Prom
- From: Ludis Langens <ludis@cruzers.com>
- Re: Big Injectors in Little Engine?
- From: "Chris P." <cp914@lvcm.com>
- non-programmer ??'s
- From: "Chris P." <cp914@lvcm.com>
- Re: Edge board scanners
- From: rr <RRauscher@nni.com>
- Re: Edge board scanners
- From: rr <RRauscher@nni.com>
- 90 TPI computer and wiring setup question???
- Re: New Prom
- From: Kevin Crain <kevin@warpten.com>
- Re: 90 TPI computer and wiring setup question???
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Call for standards: EPROM/cal editing
- From: Eric Aos <EOA@spartek.com>
- Re: Edge board scanners
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Call for standards: EPROM/cal editing
- Re: 90 TPI computer and wiring setup question???
- Re: Call for standards: EPROM/cal editing
- Re: 90 TPI computer and wiring setup question???
- Re: Call for standards: EPROM/cal editing
- From: "TK" <terryk@foothill.net>
- Re: 90 TPI computer and wiring setup question???
- Re: 90 TPI computer and wiring setup question???
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 90 TPI computer and wiring setup question???
- Re: Call for standards: EPROM/cal editing
- Re: Call for standards: EPROM/cal editing
- From: Dig <turbodig@yahoo.com>
- Re: New Prom
- From: Len Sabatine <sabatine@epix.net>
- FYI: Fw: Modifying TDF files?
- From: "Craig Moates" <craig.moates@home.com>
- Re: MEFI 3.0
- From: romans@starstream.net (Romans, Mark)
- Question about BLMs
- From: "Edmond" <euro@lvcm.com>
- Re: New Prom
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Call for standards: EPROM/cal editing
- From: Dig <turbodig@yahoo.com>
- Re: Call for standards: EPROM/cal editing
- From: "TK" <terryk@foothill.net>
- Re: Edge board scanners
- From: rr <RRauscher@nni.com>
- Re: Call for standards: EPROM/cal editing
- From: "TK" <terryk@foothill.net>
- News Release - Maybe this will make life a little easier
- From: "Bob" <bobk@gscyclone.com>
- manual IAC differences.
- From: "Kevin R" <KEReyn@gte.net>
- Re: manual IAC differences.
- From: "Bruce Plecan" <nacelp@bright.net>
- 89 '165 Ecu for Winbin - Come and get it
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: News Release - Maybe this will make life a little easier
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Call for standards: EPROM/cal editing
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Question about BLMs
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: New Prom
- From: Len Sabatine <sabatine@epix.net>
- Re: mask 88h hac'd
- From: Peter Gargano <peter@techedge.com.au>
- Re: mask 88h hac'd
- From: "Programmer" <nwester@eidnet.org>
- TBI idle problem
- From: "Brent" <WildKat@paonline.com>
- Re: E vs M ALDL pins
- From: Ludis Langens <ludis@cruzers.com>
- Re: Australian 1227808 ECU data for .ecu file
- From: Ludis Langens <ludis@cruzers.com>
- Re: S19 vs S9
- From: Ludis Langens <ludis@cruzers.com>
- Re: Elementary assembly lang question...
- From: Ludis Langens <ludis@cruzers.com>
- Re: 90 TPI computer and wiring setup question???
- From: Ludis Langens <ludis@cruzers.com>
- Re: TBI idle problem
- From: "Programmer" <nwester@eidnet.org>
- Re: TBI idle problem
- From: "Brent" <WildKat@paonline.com>
- Re: Newbie help
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Fuel rail vaporization
- From: "Daniel Collins" <bossute@one.net.au>
- Re: Newbie help
- From: Ludis Langens <ludis@cruzers.com>
- Re: Australian 1227808 ECU data for .ecu file
- From: Peter Gargano <peter@techedge.com.au>
- Re: Australian 1227808 ECU data for .ecu file
- From: Peter Gargano <peter@techedge.com.au>
- Re: Fuel rail vaporization
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: 730 ECM Swap
- From: "Robert Ward" <rawardsr@hotmail.com>
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: Call for standards: EPROM/cal editing
- From: "Dave Zug" <dzug@delanet.com>
- Re: 90 TPI computer and wiring setup question???
- From: "Dave Zug" <dzug@delanet.com>
- Re: Call for standards: EPROM/cal editing
- From: "Dave Zug" <dzug@delanet.com>
- Re: 90 TPI computer and wiring setup question???
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Fuel rail vaporization
- From: "Rod Davis" <rodldavis@home.com>
- Re: Call for standards: EPROM/cal editing
- From: "Dave Zug" <dzug@delanet.com>
- Message formatting
- From: Carl Ijames <ijames@netaxs.com>
- Re: Message formatting
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Edge board scanners
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Message formatting
- From: Peter Gargano <peter@techedge.com.au>
- Re: Call for standards: EPROM/cal editing software
- From: "Paul Blackmore" <paul_blackmore@xtra.co.nz>
- Re: Message formatting
- Re: Fuel rail vaporization
- From: "Programmer" <nwester@eidnet.org>
- Re: Call for standards: EPROM/cal editing
- From: "Programmer" <nwester@eidnet.org>
- Re: Call for standards: EPROM/cal editing
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Call for standards: EPROM/cal editing
- From: "Dave Zug" <dzug@delanet.com>
- Re: 89 '165 Ecu for Winbin - Come and get it
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Message formatting
- From: DC Smith <morepoweral@tetranet.net>
- Re: Call for standards: EPROM/cal editing
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Call for standards: EPROM/cal editing
- From: "Dave Zug" <dzug@delanet.com>
- Re: Call for standards: EPROM/cal editing
- From: "Programmer" <nwester@eidnet.org>
- Re: Call for standards: EPROM/cal editing
- From: "Programmer" <nwester@eidnet.org>
- Re: 89 '165 Ecu for Winbin - Come and get it
- From: "Programmer" <nwester@eidnet.org>
- Re: Message formatting
- From: "Dave Zug" <dzug@delanet.com>
- Re: Call for standards: EPROM/cal editing
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: (sensor swappers)
- From: "Dave Zug" <dzug@delanet.com>
- Re: Message formatting
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Call for standards: EPROM/cal editing
- From: "Programmer" <nwester@eidnet.org>
- Re: 89 '165 Ecu for Winbin - Come and get it
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Message formatting
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Message formatting
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 ECM Swap
- Re: 730 ECM Swap
- Re: 165 ECU File
- From: "Programmer" <nwester@eidnet.org>
- Re: 89 '165 Ecu for Winbin - Come and get it
- From: "Programmer" <nwester@eidnet.org>
- Re: 730 ECM Swap
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 ECM Swap
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: 730 ECM Swap
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: 730 ECM Swap
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 ECM Swap
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 ECM Swap
- Re: 730 ECM Swap
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 165 ECU File
- From: "Programmer" <nwester@eidnet.org>
- Re: Call for standards: EPROM/cal editing software
- From: Ludis Langens <ludis@cruzers.com>
- Re: Edge board scanners
- From: Ludis Langens <ludis@cruzers.com>
- Re: Message formatting
- From: Ludis Langens <ludis@cruzers.com>
- Re: Call for standards: EPROM/cal editing
- From: sapearso@collins.rockwell.com
- Re: New Prom
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Big Injectors in Little Engine?
- From: timsiford@hushmail.com
- Re: 730 ECM Swap
- From: "Dave Zug." <dzug@delanet.com>
- Re: 730 ECM Swap
- From: "Dave Zug." <dzug@delanet.com>
- Re: Call for standards: EPROM/cal editing
- Re: Call for standards: EPROM/cal editing
- From: Len Sabatine <sabatine@epix.net>
- Re: DIY_EFI Digest V5 #369
- From: David Rhoads II <rhoads@adi.com>
- Driver board shipping addresses
- From: David Rhoads II <rhoads@adi.com>
- Re: Big Injectors in Little Engine?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Call for standards: EPROM/cal editing
- From: "Dave Zug." <dzug@delanet.com>
- AFR calc from Diacom data... was RE: Adding another O2 sensor
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: 730 ECM Swap
- Re: News Release - Maybe this will make life a little easier
- From: Len Sabatine <sabatine@epix.net>
- Re: 730 ECM Swap
- From: "Dave Zug." <dzug@delanet.com>
- Re: Call for standards: EPROM/cal editing
- From: Len Sabatine <sabatine@epix.net>
- Re: Big Injectors in Little Engine?
- From: timsiford@hushmail.com
- RE: 730 ECM Swap
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: 730 ECM Swap
- From: timsiford@hushmail.com
- Re: 730 ECM Swap
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 ECM Swap
- Re: Big Injectors in Little Engine?
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Big Injectors in Little Engine?
- O2 sensors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Call for standards: EPROM/cal editing
- From: "Programmer" <nwester@eidnet.org>
- Re: New Prom
- From: "Programmer" <nwester@eidnet.org>
- Re: Call for standards: EPROM/cal editing
- From: "Programmer" <nwester@eidnet.org>
- what is an "emulator"?
- Re: what is an "emulator"?
- From: Squash <realsquash@yahoo.com>
- Re: what is an "emulator"?
- Re: Call for standards: EPROM/cal editing
- From: Len Sabatine <sabatine@epix.net>
- Re: what is an "emulator"?
- From: Len Sabatine <sabatine@epix.net>
- Re: what is an "emulator"?
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: O2 sensors
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: O2 sensors
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Big Injectors in Little Engine?
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: TBI idle problem
- From: Bob Valentine <bob@tecmark.com>
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: 89 '165 Ecu for Winbin - Come and get it
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: 730 ECM Swap
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: Message formatting
- From: Don Burns <donburns@macconnect.com>
- Re: 730 ECM Swap
- Re: Message formatting
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Message formatting
- From: Peter Gargano <peter@techedge.com.au>
- Re: 730 ECM Swap
- From: "Bruce Plecan" <nacelp@bright.net>
- [no subject]
- From: "Warren Bowley" <gmecmml@cfl.rr.com>
- Re: 730 ECM Swap
- From: romans@starstream.net (Romans, Mark)
- Re: non-programmer ??'s
- From: steve ravet <sravet@arm.com>
- Re: AFR calc from Diacom data... was RE: Adding another O2 sensor
- From: romans@starstream.net (Romans, Mark)
- Re: 730 ECM Swap
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: AFR calc from Diacom data... was RE: Adding another O2 sensor
- From: romans@starstream.net (Romans, Mark)
- Re: Call for standards: EPROM/cal editing
- From: "Programmer" <nwester@eidnet.org>
- Re: 89 '165 Ecu for Winbin - Come and get it
- From: "Programmer" <nwester@eidnet.org>
- DIY EGOR
- From: "Bruce Plecan" <nacelp@bright.net>
- New for Old TBI intake swap
- From: Bob Valentine <bob@tecmark.com>
- Re: 730 ECM Swap
- Re: 730 ECM Swap
- Re: 730 ECM Swap
- Re: DIY EGOR
- Re: DIY EGOR
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: O2 sensors
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: AFR calc from Diacom data... was RE: Adding another O2 sensor
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: AFR calc from Diacom data... was RE: Adding another O2 sensor
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: E vs M ALDL pins
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Big Injectors in Little Engine?
- From: "Jeffrey Scott" <jws6367@lycos.com>
- Re: DIY EGOR
- From: garwillis@msn.com (Garfield Willis)
- Re: DIY EGOR
- From: "Kevin R" <KEReyn@gte.net>
- Re: what is an "emulator"?
- From: DC Smith <morepoweral@tetranet.net>
- Re: DIY EGOR
- From: "Bruce Plecan" <nacelp@bright.net>
- 730 j-body communication
- From: Mike Rolica <97005620@lambton.on.ca>
- Re: what is an "emulator"?
- From: "Jeff M" <tystorm@email.msn.com>
- Re: DIY EGOR
- From: Mike Rolica <97005620@lambton.on.ca>
- Re: DIY EGOR
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIY EGOR
- From: "Bruce Plecan" <nacelp@bright.net>
- 10 LED O2 monitor
- From: "Mathieu Blais" <fireb76@videotron.ca>
- Re: 10 LED O2 monitor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 10 LED O2 monitor
- From: steve ravet <sravet@arm.com>
- Re: 730 ECM Swap
- From: rr <RRauscher@nni.com>
- Re: 10 LED O2 monitor
- From: romans@starstream.net (Romans, Mark)
- Re: 10 LED O2 monitor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 10 LED O2 monitor
- From: romans@starstream.net (Romans, Mark)
- Re: 10 LED O2 monitor
- From: steve ravet <sravet@arm.com>
- Re: Call for standards: EPROM/cal editing
- From: Len Sabatine <sabatine@epix.net>
- Re: 730 j-body communication
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: 10 LED O2 monitor
- From: "Bruce Plecan" <nacelp@bright.net>
- WooHoo new 730 ECM
- From: "Patrick G. Moore" <patm@cais.com>
- Re: 730 ECM Swap
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: 730 ECM Swap
- From: "Walter Sherwin" <wsherwin@home.com>
- connector pins -- was Re: 730 ECM Swap
- From: Peter Gargano <peter@techedge.com.au>
- Re: 730 j-body communication
- From: Scot Sealander <Sealand@clarityconnect.com>
- 2 & 3 Bar Map Stuff
- From: "Walter Sherwin" <wsherwin@home.com>
- RE: DIY EGOR
- From: "Warren Bowley" <gmecmml@cfl.rr.com>
- RE: O2 sensors
- From: "Warren Bowley" <gmecmml@cfl.rr.com>
- argh.
- From: "Warren Bowley" <gmecmml@cfl.rr.com>
- Re: DIY EGOR
- From: "Bruce Plecan" <nacelp@bright.net>
- ENTIRECATALOG.pdf
- From: "John Martin" <gm.man@gte.net>
- RE: DIY EGOR
- From: kgil1@tampabay.rr.com
- RE: DIY EGOR
- From: kgil1@tampabay.rr.com
- Re: WooHoo new 730 ECM
- From: Ludis Langens <ludis@cruzers.com>
- Re: what is an "emulator"?
- From: Ludis Langens <ludis@cruzers.com>
- Re: AFR calc from Diacom data... was RE: Adding another O2 sensor
- From: Ludis Langens <ludis@cruzers.com>
- RE: DIY EGOR
- From: "Warren Bowley" <gmecmml@cfl.rr.com>
- Re: 2 & 3 Bar Map Stuff
- [no subject]
- From: "Darryl & Karen Smith" <darrylkarensmith@netzero.net>
- Re: 2 & 3 Bar Map Stuff
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: 730 j-body communication
- From: "mike" <97005620@lambton.on.ca>
- Re: DIY EGOR
- From: "Dave Zug" <dzug@delanet.com>
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: DIY EGOR
- From: "Dave Zug" <dzug@delanet.com>
- Re: Call for standards: EPROM/cal editing
- From: "Dave Zug" <dzug@delanet.com>
- Re: 730 ECM Swap
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: DIY EGOR
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: what is an "emulator"?
- From: sapearso@collins.rockwell.com
- Watch for new round of virii!!!
- From: Shannen Durphey <shannen@grolen.com>
- Re: 730 ECM Swap
- From: "Dan Townsend" <xybertron@cox-internet.com>
- RE: O2 sensors
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: 730 ECM Swap
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- 89 MANUAL BIN
- From: "Todd Burkard" <toddburkard@pcmc.com>
- RE: AFR calc from Diacom data... was RE: Adding another O2 sensor
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: 730 ECM Swap
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: 89 MANUAL BIN
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: AFR calc from Diacom data... was RE: Adding another O2 sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 89 MANUAL BIN
- Bad oxygen sensor ?
- From: "Edmond" <euro@lvcm.com>
- Re: Bad oxygen sensor ?
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Bad oxygen sensor ?
- From: timsiford@hushmail.com
- Re: Bad oxygen sensor ?
- From: "Edmond" <euro@lvcm.com>
- Re: Bad oxygen sensor ?
- From: romans@starstream.net (Romans, Mark)
- Re: Bad oxygen sensor ?
- From: David Cooley <n5xmt@triad.rr.com>
- Re: Bad oxygen sensor ?
- From: timsiford@hushmail.com
- Re: Bad oxygen sensor ?
- From: romans@starstream.net (Romans, Mark)
- Re: Bad oxygen sensor ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Bad oxygen sensor ?
- From: "Edmond" <euro@lvcm.com>
- Re: Bad oxygen sensor ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Bad oxygen sensor ?
- From: "Edmond" <euro@lvcm.com>
- Re: Bad oxygen sensor ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Bad oxygen sensor ?
- From: Len Sabatine <sabatine@epix.net>
- Re: MemCals Needing a Good Home...
- From: steve ravet <sravet@arm.com>
- Re: Bad oxygen sensor ?
- From: "Edmond" <euro@lvcm.com>
- Re: Bad oxygen sensor ?
- From: "Programmer" <nwester@eidnet.org>
- Re: Bad oxygen sensor ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: AFR calc from Diacom data... was RE: Adding another O2 sensor
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Watch for new round of virii!!!
- From: "Dave Zug" <dzug@delanet.com>
- Re: Bad oxygen sensor ?
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: MemCals Needing a Good Home...
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Bad oxygen sensor ?
- From: romans@starstream.net (Romans, Mark)
- Re: Bad oxygen sensor ?
- From: "Bruce Plecan" <nacelp@bright.net>
- WinBin Version Next...
- From: "Eric Aos" <eoa@spartek.com>
- 1227148 ecu ??
- From: "Programmer" <nwester@eidnet.org>
- Re: WinBin Version Next...
- From: "NRG" <euro@lvcm.com>
- Re: MemCals Needing a Good Home...
- Re: MemCals Needing a Good Home...
- From: Peter Gargano <peter@techedge.com.au>
- Re: MemCals Needing a Good Home...
- From: "Walter Sherwin" <wsherwin@home.com>
- RE: MemCals Needing a Good Home...
- From: "David Papworth" <papworth@ichips.intel.com>
- Re: non-programmer ??'s
- From: "Chris P." <cp914@lvcm.com>
- Re: MemCals Needing a Good Home...
- From: "Bruce Plecan" <nacelp@bright.net>
- 1227148 ecu uploaded
- From: Carl Ijames <ijames@netaxs.com>
- Re: 1227148 ecu uploaded
- From: "Programmer" <nwester@eidnet.org>
- Re: WinBin Version Next...
- From: "Programmer" <nwester@eidnet.org>
- Re: DIY EGOR
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Measuring Altitude
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: what is an "emulator"?
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: WinBin Version Next...
- From: "Daniel Collins" <bossute@one.net.au>
- Re: MemCals Needing a Good Home...
- From: Ludis Langens <ludis@cruzers.com>
- Re:
- From: "Bruce Plecan" <nacelp@bright.net>
- J N's MiniRam backfire
- From: timsiford@hushmail.com
- Re: Measuring Altitude
- Re: J N's MiniRam backfire
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: J N's MiniRam backfire
- RE: WinBin Version Next...
- From: "Eric Aos" <eoa@spartek.com>
- Re: J N's MiniRam backfire
- Re: J N's MiniRam backfire
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: J N's MiniRam backfire
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: J N's MiniRam backfire
- From: timsiford@hushmail.com
- Re: J N's MiniRam backfire
- RE: J N's MiniRam backfire
- From: "David Cooley" <n5xmt@triad.rr.com>
- Re: J N's MiniRam backfire
- Re: J N's MiniRam backfire
- Re: J N's MiniRam backfire
- From: timsiford@hushmail.com
- Re: J N's MiniRam backfire
- From: timsiford@hushmail.com
- Re: J N's MiniRam backfire
- From: Carl Ijames <ijames@netaxs.com>
- RE: J N's MiniRam backfire
- From: "David Cooley" <n5xmt@triad.rr.com>
- Viruses
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: J N's MiniRam backfire
- Re: J N's MiniRam backfire
- Re: Viruses
- From: Squash <realsquash@yahoo.com>
- Re: J N's MiniRam backfire
- Re: Viruses
- From: "Swayze" <kswayze@bellsouth.net>
- Re: J N's MiniRam backfire
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Viruses
- From: "Rex Weatherford" <rexweatherford@home.com>
- Re: Viruses
- From: steve ravet <sravet@arm.com>
- Re: Viruses
- From: timsiford@hushmail.com
- Re: Viruses
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Viruses
- From: "David Cooley" <n5xmt@triad.rr.com>
- Re: J N's MiniRam backfire
- From: timsiford@hushmail.com
- RE: Viruses
- From: "Eric Aos" <eoa@spartek.com>
- Re: Viruses
- From: Peter Gargano <peter@techedge.com.au>
- Re: J N's MiniRam backfire
- Re: J N's MiniRam backfire
- From: Bob Valentine <bob@tecmark.com>
- Re: Viruses
- From: Bob Valentine <bob@tecmark.com>
- Re: Viruses
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Viruses
- From: "Bruce Plecan" <nacelp@bright.net>
- XFire Bin
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Viruses
- From: "Edmond" <euro@lvcm.com>
- Re: Viruses
- Re: Viruses
- From: Squash <realsquash@yahoo.com>
- Re: Viruses
- From: "Dave Zug" <dzug@delanet.com>
- Re: Viruses
- From: "Dave Zug" <dzug@delanet.com>
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: Viruses
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MemCals Needing RFD Tweeking Before Finding A Home......
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: J N's MiniRam backfire
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Viruses
- From: "Kevin R" <KEReyn@gte.net>
- Re: J N's MiniRam backfire
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: XFire Bin
- From: "Kevin R" <KEReyn@gte.net>
- Re: MemCals Needing RFD Tweeking Before Finding A Home......
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Viruses
- From: Len Sabatine <sabatine@epix.net>
- Re: J N's MiniRam backfire
- Re: Viruses
- From: Len Sabatine <sabatine@epix.net>
- Re: Viruses
- From: Len Sabatine <sabatine@epix.net>
- Re: Viruses
- From: Roger Heflin <rah@horizon.hit.net>
- Re: Viruses
- From: Roger Heflin <rah@horizon.hit.net>
- RE: Viruses
- From: Bill Shaw <bshaw@connix.com>
- Re: 4.1 FI
- From: "Darryl & Karen Smith" <darrylkarensmith@netzero.net>
- Re: Viruses
- From: "Programmer" <nwester@eidnet.org>
- Re: Viruses
- From: "Programmer" <nwester@eidnet.org>
- check sum calculator
- From: "Kevin R" <KEReyn@gte.net>
- Re: J N's MiniRam backfire
- From: "Programmer" <nwester@eidnet.org>
- Re: Viruses
- From: Len Sabatine <sabatine@epix.net>
- Re: Viruses
- From: Len Sabatine <sabatine@epix.net>
- Re: check sum calculator
- From: "Dave Zug" <dzug@delanet.com>
- XFire Bin CSH, HQ Special
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: check sum calculator
- From: Carl Ijames <ijames@netaxs.com>
- Re: Viruses
- From: Bob Valentine <bob@tecmark.com>
- Re: MemCals Needing RFD Tweeking Before Finding A Home......
- From: Ludis Langens <ludis@cruzers.com>
- Re: J N's MiniRam backfire
- From: timsiford@hushmail.com
- Re: J N's MiniRam backfire
- From: timsiford@hushmail.com
- Re: MemCals Needing RFD Tweeking Before Finding A Home......
- Re: MemCals Needing RFD Tweeking Before Finding A Home......
- From: "Walter Sherwin" <wsherwin@home.com>
- JN's Minram Backfire UPDATE!
- head gaskets
- Re: J N's MiniRam backfire
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: MemCals Needing RFD Tweeking Before Finding A Home......
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: head gaskets
- From: John_Calabrese@ENGELHARD.COM
- Re: head gaskets
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: head gaskets N notes about such
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: head gaskets
- From: Len Sabatine <sabatine@epix.net>
- Re: Viruses
- From: Sketch <sketch@floridafieros.org>
- Re: JN's Minram Backfire UPDATE!
- From: rr <RRauscher@nni.com>
- Re: check sum calculator
- From: rr <RRauscher@nni.com>
- Timing jump at idle
- From: Bob Valentine <bob@tecmark.com>
- Re: Timing jump at idle
- From: "Edmond" <euro@lvcm.com>
- Re: Timing jump at idle
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Timing jump at idle
- From: rr <RRauscher@nni.com>
- Re: head gaskets
- From: "Darryl & Karen Smith" <darrylkarensmith@netzero.net>
- Re: check sum calculator
- From: "Dave Zug" <dzug@delanet.com>
- Re: Timing jump at idle
- From: "Dave Zug" <dzug@delanet.com>
- Aftermarket ROMs
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- 165 to 730 ECM Swap Update
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Fw: Scope pics...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: MemCals Needing RFD Tweeking Before Finding A Home......
- From: Ludis Langens <ludis@cruzers.com>
- Re: check sum calculator
- From: "TK" <terryk@foothill.net>
- Re: Scope pics...
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Re: Need small IAC
- From: "Swayze" <kswayze@bellsouth.net>
- Re: 730 ECM Swap
- From: Terry <thartman@fastlane.net>
- scope
- From: "Bruce Plecan" <nacelp@bright.net>
- Quick - ECM app help
- Re: Quick - ECM app help
- From: romans@starstream.net (Romans, Mark)
- Re: 730 ECM Swap
- From: Zacek DenniS <bowtye8@yahoo.com>
- Looking for a website
- general info
- From: "Mathieu Blais" <fireb76@videotron.ca>
- Re: general info
- Re: Looking for a website
- From: Peter Gargano <peter@techedge.com.au>
- Question about WOT table in $8D bin
- From: "NRG" <euro@lvcm.com>
- 165 knock sensor sensitivity
- From: romans@starstream.net (Romans, Mark)
- Re: 165 knock sensor sensitivity
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: off-list Re: general info
- From: "Mathieu Blais" <fireb76@videotron.ca>
- Re: off-list Re: general info
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Question about WOT table in $8D bin
- From: Squash <realsquash@yahoo.com>
- Re: Question about WOT table in $8D bin
- From: "Edmond" <euro@lvcm.com>
- Re: head gaskets
- From: "Programmer" <nwester@eidnet.org>
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: 730 ECM Swap
- From: Shannen Durphey <shannen@grolen.com>
- Re: 730 ECM Swap
- From: Len Sabatine <sabatine@epix.net>
- Re: 730 ECM Swap
- Re: Question about WOT table in $8D bin
- From: "Edmond" <euro@lvcm.com>
- Re: 730 ECM Swap
- From: Bob Valentine <bob@tecmark.com>
- Re: 730 ECM Swap
- From: Shannen Durphey <shannen@grolen.com>
- Just got my TPI running...questions...
- Re: 730 ECM Swap
- From: Len Sabatine <sabatine@epix.net>
- Re: 165 knock sensor sensitivity
- From: "Programmer" <nwester@eidnet.org>
- Re: 730 ECM Swap
- From: "Rob Higgins" <rhiggins@interfusion.net.au>
- Re: Question about WOT table in $8D bin
- From: "Programmer" <nwester@eidnet.org>
- Re: 730 ECM Swap
- From: "Programmer" <nwester@eidnet.org>
- Re: Just got my TPI running...questions...
- Re: Just got my TPI running...questions...
- From: "NRG" <euro@lvcm.com>
- Re: Question about WOT table in $8D bin
- From: romans@starstream.net (Romans, Mark)
- Re: Just got my TPI running...questions...
- Re: Just got my TPI running. Diagnostics
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Just got my TPI running...questions...
- From: Shannen Durphey <shannen@grolen.com>
- Re: Just got my TPI running...questions...
- Re: Just got my TPI running...questions...
- From: Shannen Durphey <shannen@grolen.com>
- Re: Just got my TPI running...questions...
- From: "Walter Sherwin" <wsherwin@home.com>
- heads are back on - made some runs and tuning
- Re: heads are back on - made some runs and tuning
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 165 knock sensor sensitivity
- Re: Question about WOT table in $8D bin
- From: "NRG" <euro@lvcm.com>
- Re: Just got my TPI running...questions...
- From: "NRG" <euro@lvcm.com>
- Re: 730 ECM Swap
- From: Ludis Langens <ludis@cruzers.com>
- Re: 730 ECM Swap
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Just got my TPI running...questions...
- From: "Bruce Plecan" <nacelp@bright.net>
- Driver board shipping costs update
- RE: Scope pics...
- From: don.broadus@exeloncorp.com
- Miniram Backfire Update II
- Re: 730 ECM Swap
- Re: Scope pics...
- From: "Bruce Plecan" <nacelp@bright.net>
- looking for afdz and/or albk bins
- From: Pat Ford <pford@qnx.com>
- RE: Scope pics...
- From: Eric Bryant <BRYANTE@ghsp.com>
- Re: Scope pics...
- From: "Bruce Plecan" <nacelp@bright.net>
- DIS Ditty
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: looking for afdz and/or albk bins
- From: Ludis Langens <ludis@cruzers.com>
- Re: Scope pics...
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: DIS Ditty
- my 355/ 730ecm truck
- From: "Mike Rolica" <97005620@lambton.on.ca>
- RE: Scope pics...
- From: don.broadus@exeloncorp.com
- Re: DIS Ditty
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIS Ditty
- From: "Swayze" <kswayze@bellsouth.net>
- Re: Scope pics...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Miniram Backfire Update II
- From: Bob Valentine <bob@tecmark.com>
- RE: Miniram Backfire Update II
- From: "Bob" <bobk@gscyclone.com>
- RE: 165 knock sensor sensitivity
- From: "Bob" <bobk@gscyclone.com>
- Re: 165 knock sensor sensitivity
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIS Ditty
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Miniram Backfire Update II
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Scope pics...
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: Scope pics...
- From: David Cooley <n5xmt@triad.rr.com>
- Re: 165 knock sensor sensitivity
- From: Shannen Durphey <shannen@grolen.com>
- Re: 730 ECM Swap
- From: Shannen Durphey <shannen@grolen.com>
- Re: looking for afdz and/or albk bins
- From: chetwagner@uswest.net
- Re: Scope pics...
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Re: Scope pics...
- From: Peter Gargano <peter@techedge.com.au>
- Re: Scope pics...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Scope pics...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 165 knock sensor sensitivity
- DIY EGOR
- From: "Bruce Plecan" <nacelp@bright.net>
- Proms bigger than 64K
- From: Richard Wakeling <kojab@optushome.com.au>
- Re: 10 LED O2 monitor
- From: "Mathieu Blais" <fireb76@videotron.ca>
- Re: my 355/ 730ecm truck
- From: romans@starstream.net (Romans, Mark)
- Re: head gaskets
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Proms bigger than 64K
- From: Peter Gargano <peter@techedge.com.au>
- Re: DIS Ditty
- From: Carl Ijames <ijames@netaxs.com>
- Re: DIS Ditty
- From: sapearso@collins.rockwell.com
- Re: Scope pics...
- From: steve ravet <sravet@arm.com>
- RE: Scope pics...
- From: "David Cooley" <n5xmt@triad.rr.com>
- Re: DIS Ditty
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Miniram Backfire Update II
- Re: Scope pics...
- Re: 10 LED O2 monitor
- From: "Mike Martone" <mmartone@pop800.gsfc.nasa.gov>
- RE: Scope pics...
- From: don.broadus@exeloncorp.com
- RE: Scope pics...
- From: "David Cooley" <n5xmt@triad.rr.com>
- Re: 10 LED O2 monitor
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Scope pics...
- From: don.broadus@exeloncorp.com
- Re: 10 LED O2 monitor
- From: Ludis Langens <ludis@cruzers.com>
- RE: 10 LED O2 monitor
- From: "David Cooley" <n5xmt@triad.rr.com>
- Re: 10 LED O2 monitor
- RE: Scope pics...
- From: "David Cooley" <n5xmt@triad.rr.com>
- Re: 10 LED O2 monitor
- From: "Mike Martone" <mmartone@pop800.gsfc.nasa.gov>
- Re: DIS Ditty
- From: Shannen Durphey <shannen@grolen.com>
- Re: DIS Ditty
- From: Andrew Mattei <amattei@mindspring.com>
- Re: 10 LED O2 monitor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIS Ditty
- From: "Bruce Plecan" <nacelp@bright.net>
- Hypertech carrier
- RE: Scope pics...
- From: don.broadus@exeloncorp.com
- RE: 10 LED O2 monitor
- From: don.broadus@exeloncorp.com
- Re: 10 LED O2 monitor
- From: Peter Gargano <peter@techedge.com.au>
- RE: 10 LED O2 monitor
- From: Eric Bryant <BRYANTE@ghsp.com>
- Re: Hypertech carrier
- From: timsiford@hushmail.com
- Calpack - Where to buy cheap?
- Re: 10 LED O2 monitor
- From: "Aron Lopes Petrucci" <aronlp@onda.com.br>
- Re: Hypertech carrier
- Re: Hypertech carrier
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 10 LED O2 monitor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Hypertech carrier
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Hypertech carrier
- From: Greg Westphal <gcwestph@erols.com>
- Re: Calpack - Where to buy cheap?
- From: Greg Westphal <gcwestph@erols.com>
- Re: Hypertech carrier
- Re: Calpack - Where to buy cheap?
- DIY EGOR plans
- From: "NickG" <nikog@mediaone.net>
- 165 to 730 Harness - Final Info
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: 165 to 730 Harness - Final Info
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Hypertech carrier
- Re: Scope pics...
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Re: head gaskets
- From: "Programmer" <nwester@eidnet.org>
- Re: DIY EGOR plans
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: Low power 5.0 TPI
- From: "Programmer" <nwester@eidnet.org>
- Re: head gaskets
- From: Len Sabatine <sabatine@epix.net>
- base / advance timing - TBI/TPI with distributor
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: head gaskets
- From: "Programmer" <nwester@eidnet.org>
- Re: 730 ECM Swap - UPDATE
- From: "Dave Zug" <dzug@delanet.com>
- Re: 730 ECM Swap
- From: "Dave Zug" <dzug@delanet.com>
- Re: Hypertech carrier
- From: "Dave Zug" <dzug@delanet.com>
- Re: 730 ECM Swap - UPDATE
- From: "Dave Zug" <dzug@delanet.com>
- Re: Hypertech carrier
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: head gaskets
- From: Len Sabatine <sabatine@epix.net>
- Re: 730 ECM Swap - UPDATE
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIS Ditty
- From: sapearso@collins.rockwell.com
- Re: 165 to 730 Harness - Final Info
- From: Peter Gargano <peter@techedge.com.au>
- Re: 165 to 730 Harness - terminal info
- From: Speartech <speartec@iquest.net>
- RE: head gaskets
- From: Eric Bryant <BRYANTE@ghsp.com>
- Re: Question about WOT table in $8D bin
- From: timsiford@hushmail.com
- 89 $6E Code Question
- RE: 10 LED O2 monitor
- From: don.broadus@exeloncorp.com
- Analog meters
- From: Steven Ciciora <ciciora@Ciciora.com>
- Re: 89 $6E Code Question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Question about WOT table in $8D bin
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIS Ditty
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: Analog meters
- Re: head gaskets
- From: "Programmer" <nwester@eidnet.org>
- Re: Question about WOT table in $8D bin
- From: timsiford@hushmail.com
- Re: Question about WOT table in $8D bin
- From: "Edmond" <euro@lvcm.com>
- Re: base / advance timing - TBI/TPI with distributor
- Re: Question about WOT table in $8D bin
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Question about WOT table in $8D bin
- I'm ready for Combo Driver payments
- From: David Rhoads II <rhoads@adi.com>
- Re: Question about WOT table in $8D bin
- From: "NRGZ28" <euro@lvcm.com>
- Re: Question about WOT table in $8D bin
- From: "Bruce Plecan" <nacelp@bright.net>
- Fw: Miniram Backfire Update II
- RE: Miniram Backfire Update II
- From: don.broadus@exeloncorp.com
- Re: I'm ready for Combo Driver payments - webpage
- From: David Rhoads II <rhoads@adi.com>
- Re: Miniram Backfire Update II
- Re: Low power 5.0 TPI
- From: rr <RRauscher@nni.com>
- Crane AFPR
- From: "NRGZ28" <euro@lvcm.com>
- Re: Question about WOT table in $8D bin
- From: rr <RRauscher@nni.com>
- Re: Question about WOT table in $8D bin
- From: timsiford@hushmail.com
- Re: Crane AFPR
- From: "NRGZ28" <euro@lvcm.com>
- Re: Question about WOT table in $8D bin
- From: Len Sabatine <sabatine@epix.net>
- Re: 89 $6E Code Question
- From: Bob Valentine <bob@tecmark.com>
- Re: 89 $6E Code Question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Question about WOT table in $8D bin
- From: "NRGZ28" <euro@lvcm.com>
- Re: Question about WOT table in $8D bin
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Question about...
- From: "Dave Zug" <dzug@delanet.com>
- Re: Question about WOT table in $8D bin
- From: Greg Westphal <gcwestph@erols.com>
- Re: Question about WOT table in $8D bin
- From: Len Sabatine <sabatine@epix.net>
- Re: Question about...
- From: "Bruce Plecan" <nacelp@bright.net>
- More DIY EGOR
- From: "Bruce Plecan" <nacelp@bright.net>
- Diesel EFI
- From: sapearso@collins.rockwell.com
- Re: Diesel EFI
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: Diesel EFI
- Re: Question about...
- From: timsiford@hushmail.com
- Re: Diesel EFI
- From: "Programmer" <nwester@eidnet.org>
- Re: Question about...
- Western union location for Driver brd International pymts
- From: David Rhoads II <rhoads@adi.com>
- Re: Western union location for Driver brd International pymts
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Question about...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Question about...
- From: timsiford@hushmail.com
- Re: Question about...
- From: timsiford@hushmail.com
- Re: Question about...
- From: "NRGZ28" <euro@lvcm.com>
- Re: Question about...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Question about...
- From: timsiford@hushmail.com
- Re: Question about WOT table in $8D bin
- Re: Question about...
- From: "NRGZ28" <euro@lvcm.com>
- Re: Question about...
- From: timsiford@hushmail.com
- Re: Question about WOT table in $8D bin
- From: timsiford@hushmail.com
- Re: Question about...
- From: rr <RRauscher@nni.com>
- Re: Question about...
- From: rr <RRauscher@nni.com>
- Re: Question about...
- From: rr <RRauscher@nni.com>
- Re: Question about WOT table in $8D bin
- From: "NRGZ28" <euro@lvcm.com>
- Re: Question about WOT table in $8D bin
- From: rr <RRauscher@nni.com>
- PROM Size on a 165
- From: "Mitch Louole" <brief456@hotmail.com>
- Re: PROM Size on a 165
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: PROM Size on a 165
- From: "Brent" <WildKat@paonline.com>
- Re: Question about...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Question about...
- From: "Dave Zug" <dzug@delanet.com>
- Re: PROM Size on a 165
- From: Peter Gargano <peter@techedge.com.au>
- Re: Diesel EFI
- From: Shannen Durphey <shannen@grolen.com>
- Re: Question about...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Diesel EFI
- From: "Programmer" <nwester@eidnet.org>
- Injector help...
- From: "Dan Townsend" <xybertron@cox-internet.com>
- beginner question
- From: "Mathieu Blais" <fireb76@videotron.ca>
- Re: GMECM Digest V2 #636
- From: sapearso@collins.rockwell.com
- Re: beginner question
- From: "Bruce Plecan" <nacelp@bright.net>
- ABS ALDL comms
- From: Dale Klein <daklein@netzero.net>
- Re: GMECM Digest V2 #637
- From: sapearso@collins.rockwell.com
- Re: Injector help...
- From: "NickG" <nikog@mediaone.net>
- Re: PROM Size on a 165
- Re: Question about...
- From: timsiford@hushmail.com
- Re: ABS ALDL comms
- Re: Question about...
- From: timsiford@hushmail.com
- More WOT AFR stuff
- From: timsiford@hushmail.com
- RE: ABS ALDL comms
- From: "David Cooley" <n5xmt@triad.rr.com>
- Re: PROM Size on a 165
- From: "Craig Marcho" <marcho@flash.net>
- Re: ABS ALDL comms
- From: Len Sabatine <sabatine@epix.net>
- RE: ABS ALDL comms
- From: Len Sabatine <sabatine@epix.net>
- Re: Question about WOT table in $8D bin
- From: timsiford@hushmail.com
- Re: More WOT AFR stuff
- From: romans@starstream.net (Romans, Mark)
- Re: PROM Size on a 165
- From: romans@starstream.net (Romans, Mark)
- Re: PROM Size on a 165
- From: Gabe <gellett@earthlink.net>
- Re: PROM Size on a 165
- From: "Mitch Louole" <brief456@hotmail.com>
- Laptops
- From: Jay Carter <JayC@RebelRednecks.Com>
- Re: PROM Size on a 165
- From: Ludis Langens <ludis@cruzers.com>
- Re: PROM Size on a 165
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Question about WOT table in $8D bin
- From: "NRGZ28" <euro@lvcm.com>
- Re; ABS ALDL comms
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- Re: Question about WOT table in $8D bin
- From: timsiford@hushmail.com
- Re: Question about WOT table in $8D bin
- From: "NRGZ28" <euro@lvcm.com>
- Re: Question about WOT table in $8D bin
- From: "Bruce Plecan" <nacelp@bright.net>
- Schematic for 1227730 ECM
- From: donburns@macconnect.com
- Schematic for 1227730 ECM
- From: donburns@macconnect.com
- Re: Question about WOT table in $8D bin
- From: romans@starstream.net (Romans, Mark)
- Re: PROM Size on a 165
- From: Gabe <gellett@earthlink.net>
- Re: Question about WOT table in $8D bin
- From: timsiford@hushmail.com
- Re: PROM Size on a 165
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Re: Question about WOT table in $8D bin
- From: "NRGZ28" <euro@lvcm.com>
- Re: PROM Size on a 165
- From: Peter Gargano <peter@techedge.com.au>
- Re: PROM Size on a 165
- From: romans@starstream.net (Romans, Mark)
- Re: PROM Size on a 165
- From: "Craig Marcho" <marcho@flash.net>
- Re: PROM Size on a 165
- From: Gabe <gellett@earthlink.net>
- Re: Question about WOT table in $8D bin
- From: Len Sabatine <sabatine@epix.net>
- Re: Question about WOT table in $8D bin
- From: "NRGZ28" <euro@lvcm.com>
- Spark plug data
- Re: Question about WOT table in $8D bin
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Question about WOT table in $8D bin
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Question about WOT table in $8D bin
- From: "NRGZ28" <euro@lvcm.com>
- Re: Spark plug data
- MEFI installation pictures
- From: Shannen Durphey <shannen@grolen.com>
- Re: Schematic for 1227730 ECM
- From: Ludis Langens <ludis@cruzers.com>
- Re: Schematic for 1227730 ECM
- From: Peter Gargano <peter@techedge.com.au>
- Re: Question about WOT table in $8D bin
- From: romans@starstream.net (Romans, Mark)
- Re: MEFI installation pictures
- From: Bob Valentine <bob@tecmark.com>
- Re: MEFI installation pictures
- From: Shannen Durphey <shannen@grolen.com>
- Re: Question about WOT table in $8D bin
- From: Len Sabatine <sabatine@epix.net>
- Re: MEFI installation pictures
- Meter testing for ecm work
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Question about WOT table in $8D bin
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Question about WOT table in $8D bin
- From: romans@starstream.net (Romans, Mark)
- Open A/D lines onna '148?
- From: Dig <turbodig@yahoo.com>
- Re: Open A/D lines onna '148?
- Re: MEFI installation pictures
- From: "Mathieu Blais" <fireb76@videotron.ca>
- Re: MEFI installation pictures
- From: Shannen Durphey <shannen@grolen.com>
- Re: Question about WOT table in $8D bin
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Question about WOT table in $8D bin
- From: romans@starstream.net (Romans, Mark)
- Parts available from chevy 3.1L MPFI motor ('727 ECM)
- Re: Question about WOT table in $8D bin
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Meter testing for ecm work
- From: "Robert W. Hughes" <rwhughe@ev1.net>
- Is this the right place?
- From: "Jake Kooser" <jake_k@attglobal.net>
- Re: Is this the right place?
- From: Shannen Durphey <shannen@grolen.com>
- Re: GMECM Digest V2 #644
- From: Don Burns <donburns@macconnect.com>
- Re: GMECM Digest V2 #644
- From: "Bruce Plecan" <nacelp@bright.net>
- Too many BCCs, too few mask ids
- From: Ludis Langens <ludis@cruzers.com>
- RE: Parts available from chevy 3.1L MPFI motor ('727 ECM)
- 1227808 - Which cars?
- From: "Roger Merritt" <rogermerritt@hotmail.com>
- Re: Too many BCCs, too few mask ids
- From: "Programmer" <nwester@eidnet.org>
- Re: Too many BCCs, too few mask ids
- Contribution to GMECM (AFR Modifier.exe)
- From: timsiford@hushmail.com
- Quick sidenote about AFR Modifier.exe
- From: timsiford@hushmail.com
- Re: What are BCCs, mask ids
- From: Shannen Durphey <shannen@grolen.com>
- Re: Is this the right place?
- From: sapearso@collins.rockwell.com
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: "NRG" <euro@lvcm.com>
- Re: 1227808 - Which cars?
- From: "Daniel Collins" <bossute@one.net.au>
- Some basic questions
- From: "Jake Kooser" <jake_k@attglobal.net>
- Re: 1227808 - Which cars?
- From: "black maj" <blackmin@hotmail.com>
- Pump Shot table Question $6E
- DIY EGOR sensor app
- From: "NickG" <nikog@mediaone.net>
- RE: DIY EGOR sensor app
- From: "Jim Sloan" <leroy@sunflower.com>
- Re: tbi motor into 400 suburban
- Re: Too many BCCs, too few mask ids
- From: Ludis Langens <ludis@cruzers.com>
- Re: Meter testing for ecm work
- From: Ludis Langens <ludis@cruzers.com>
- RE: Some basic questions
- 89 165 TPI hack?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: TBI motor into 400 suburban
- Re: Some basic questions
- From: steve ravet <sravet@arm.com>
- Re: Pump Shot table Question $6E
- From: romans@starstream.net (Romans, Mark)
- IAC base count question.
- From: "Kevin R" <KEReyn@gte.net>
- 7747 timing question.
- From: "Kevin R" <KEReyn@gte.net>
- 7747 idle smoothing.
- From: "Kevin R" <KEReyn@gte.net>
- 88 Police 350 specs
- From: Eric Deslauriers <Eric.Deslauriers@oracle.com>
- V6 ALDL Communications
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: 88 Police 350 specs
- From: steve ravet <sravet@arm.com>
- Re: 88 Police 350 specs
- From: Eric Deslauriers <Eric.Deslauriers@oracle.com>
- Any message packrats out there?
- From: Shannen Durphey <shannen@grolen.com>
- RE: 730 ECM Swap
- From: Thomas Matthews <Tom.Matthews@wcom.com>
- Re: base / advance timing - TBI/TPI with distributor
- From: "Programmer" <nwester@eidnet.org>
- Re: Diesel EFI
- From: "Rob Higgins" <rhiggins@interfusion.net.au>
- Help 730
- From: "DALE GROAH" <dgrow@cfw.com>
- help! prbs bldg ALDL interface
- From: Eric Deslauriers <Eric.Deslauriers@oracle.com>
- Re: Any message packrats out there?
- Shannen, newest digests coming first...
- Quick question
- From: "NRG" <euro@lvcm.com>
- Re: 1227808 - Which cars?
- From: Peter Gargano <peter@techedge.com.au>
- Re: Shannen, newest digests coming first...
- From: Shannen Durphey <shannen@grolen.com>
- Re: Quick question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 730 ECM Swap (group buy)
- Re: Shannen, newest digests coming first...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Quick question
- From: "Programmer" <nwester@eidnet.org>
- Re: Shannen, newest digests coming first...
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: IAC base count question.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Quick question
- From: Len Sabatine <sabatine@epix.net>
- Re: 7747 idle smoothing.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 88 Police 350 specs
- From: steve ravet <sravet@arm.com>
- Re: 88 Police 350 specs
- From: Bob Valentine <bob@tecmark.com>
- Re: Pump Shot table Question $6E
- RE: Any message packrats out there?
- From: don.broadus@exeloncorp.com
- RE: Any message packrats out there?
- From: "David Cooley" <n5xmt@triad.rr.com>
- Re: Any message packrats out there?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Any message packrats out there?
- From: "Craig Marcho" <marcho@flash.net>
- OBDI and OBDII Scanners?
- From: "Rex Weatherford" <rexweatherford@home.com>
- Re: Quick question
- From: Barry Tisdale <btisdale@cybersol.com>
- RE: OBDI and OBDII Scanners?
- From: "David Cooley" <n5xmt@triad.rr.com>
- Some questions on DIY EGOR schematics
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Contribution to GMECM (AFR Modifier.exe)
- From: "Bob" <bobk@gscyclone.com>
- RE: 730 ECM Swap
- From: "Bob" <bobk@gscyclone.com>
- Re: Any message packrats out there?
- From: Shannen Durphey <shannen@grolen.com>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: "Dave Zug." <dzug@delanet.com>
- RE: Contribution to GMECM (AFR Modifier.exe)
- From: timsiford@hushmail.com
- Re: V6 ALDL Communications
- From: "Paul Blackmore" <paul_blackmore@xtra.co.nz>
- Re: V6 ALDL Communications
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Contribution to GMECM (AFR Modifier.exe)
- Re: Some questions on DIY EGOR schematics
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: Gabe <gellett@earthlink.net>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: "Dave Zug" <dzug@delanet.com>
- RE: Question about...
- From: "Mike Rolica" <97005620@lambton.on.ca>
- Re: Contribution to GMECM (AFR Modifier.exe)
- Message Packrats
- From: Shannen Durphey <shannen@grolen.com>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: timsiford@hushmail.com
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: timsiford@hushmail.com
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: Len Sabatine <sabatine@epix.net>
- AFR Modifier ... bugs reported
- From: timsiford@hushmail.com
- Re: AFR Modifier ... bugs reported
- From: timsiford@hushmail.com
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: timsiford@hushmail.com
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: Ludis Langens <ludis@cruzers.com>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: timsiford@hushmail.com
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: Len Sabatine <sabatine@epix.net>
- Re: AFR Modifier ... bugs reported
- From: "Dave Zug." <dzug@delanet.com>
- RE: Contribution to GMECM (AFR Modifier.exe)
- From: "David Cooley" <n5xmt@triad.rr.com>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: "Dave Zug." <dzug@delanet.com>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: "Dave Zug." <dzug@delanet.com>
- Thanksgiving
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: AFR Modifier ... bugs reported
- From: "Dave Zug." <dzug@delanet.com>
- RE: Contribution to GMECM (AFR Modifier.exe)
- From: timsiford@hushmail.com
- Re: AFR Modifier ... bugs reported
- From: timsiford@hushmail.com
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: timsiford@hushmail.com
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: timsiford@hushmail.com
- Re: AFR Modifier ... bugs reported
- From: "Dave Zug." <dzug@delanet.com>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: "Dave Zug." <dzug@delanet.com>
- Re: AFR Modifier ... bugs reported
- From: "Dave Zug." <dzug@delanet.com>
- BIN Tool Chest
- From: timsiford@hushmail.com
- LT1 ECU
- From: Dave Plummer <davepl@MICROSOFT.com>
- Re: Help for Newbies on Spark Timing
- Re: LT1 ECU
- From: "Dave Zug" <dzug@delanet.com>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: "Dave Zug" <dzug@delanet.com>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: timsiford@hushmail.com
- Fwd: ECM for sale...
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: "Programmer" <nwester@eidnet.org>
- Re: Thanksgiving
- From: "Programmer" <nwester@eidnet.org>
- Re: Help for Newbies on Spark Timing
- From: "David Papworth" <papworth@ichips.intel.com>
- New bin on incoming
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: New bin on incoming
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- c't flasher
- From: "Mike" <kswayze@bellsouth.net>
- Re: New bin on incoming
- From: "Dave Zug" <dzug@delanet.com>
- Re: New bin on incoming
- From: "Programmer" <nwester@eidnet.org>
- Re: New bin on incoming
- From: Ludis Langens <ludis@cruzers.com>
- Re: Transez. was:New bin...
- From: "Dave Zug" <dzug@delanet.com>
- Re: Transez. was:New bin...
- From: "TK" <terryk@foothill.net>
- Re: Transez. was:New bin...
- From: romans@starstream.net (Romans, Mark)
- Re: Transez. was:New bin...
- From: "TK" <terryk@foothill.net>
- Re: c't flasher
- From: Brent Obermiller <ober_b@sssnet.com>
- Re: Transez. was:New bin...
- From: romans@starstream.net (Romans, Mark)
- Re: AFR Modifier ... bugs reported
- From: "Walter Sherwin" <wsherwin@home.com>
- Fw: Knock Sensor
- From: "Bruce Plecan" <nacelp@bright.net>
- eprom for 747
- From: "Mathieu Blais" <fireb76@videotron.ca>
- Re: Transez. was:New bin...
- From: "Programmer" <nwester@eidnet.org>
- Re: eprom for 747
- From: "Bruce Plecan" <nacelp@bright.net>
- $32 - '165 ecu file ?
- From: "Programmer" <nwester@eidnet.org>
- Re: $32 - '165 ecu file ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: $32 - '165 ecu file ?
- From: romans@starstream.net (Romans, Mark)
- Re: eprom for 747
- From: Ludis Langens <ludis@cruzers.com>
- Re: New bin on incoming
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re:$32 - '165 ecu file ?(LT1/LS1 twist)
- From: Speartech <speartec@iquest.net>
- Re: Re:$32 - '165 ecu file ?(LT1/LS1 twist)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: $32 - '165 ecu file ?
- From: "Programmer" <nwester@eidnet.org>
- Re: $32 - '165 ecu file ?
- From: "Programmer" <nwester@eidnet.org>
- grams/cfm ?
- From: "Programmer" <nwester@eidnet.org>
- Re: grams/cfm ?
- From: "David Papworth" <papworth@ichips.intel.com>
- Re: grams/cfm ?
- From: "Programmer" <nwester@eidnet.org>
- BinEditor Standard Configs?
- From: "Dave Zug" <dzug@delanet.com>
- Re: grams/cfm ?
- From: "Programmer" <nwester@eidnet.org>
- Re: eprom for 747
- From: "Alain Blais" <blaisal@videotron.ca>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: "Dave Zug" <dzug@delanet.com>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: "Dave Zug" <dzug@delanet.com>
- BinEditor Standard Configs?
- From: Dig <turbodig@yahoo.com>
- Re: BinEditor Standard Configs?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: eprom for 747
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: eprom for 747
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: New bin on incoming
- From: Shannen Durphey <shannen@grolen.com>
- Re: Contribution to GMECM (AFR Modifier.exe)
- From: timsiford@hushmail.com
- Re: BinEditor Standard Configs?
- From: timsiford@hushmail.com
- BNBH.BIN Needed
- From: Richard Wakeling <kojab@optushome.com.au>
- Re: BNBH.BIN Needed
- From: Peter Gargano <peter@techedge.com.au>
- Re: BinEditor Standard Configs?
- From: "Dave Zug" <dzug@delanet.com>
- Re: $32 - '165 ecu file ?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BinEditor Standard Configs?
- From: "Programmer" <nwester@eidnet.org>
- Re: BinEditor Standard Configs?
- From: "Programmer" <nwester@eidnet.org>
- Re: BinEditor Standard Configs?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BinEditor Standard Configs?
- From: "Dave Zug" <dzug@delanet.com>
- Re: BinEditor Standard Configs?
- From: "Dave Zug" <dzug@delanet.com>
- Re: Mind Control
- From: "Dave Zug" <dzug@delanet.com>
- Re: Mind Control
- From: Shannen Durphey <shannen@grolen.com>
- Re: BinEditor Standard Configs?
- From: Len Sabatine <sabatine@epix.net>
- Re: Help for Newbies on Spark Timing
- Re: BinEditor Standard Configs?
- From: rr <RRauscher@nni.com>
- Re: BinEditor Standard Configs?
- From: "Bruce Plecan" <nacelp@bright.net>
- 1994 Truck ECM ??
- From: Squash <realsquash@yahoo.com>
- Re: 1994 Truck ECM ??
- Re: $32 - '165 ecu file ?
- From: Shannen Durphey <shannen@grolen.com>
- Re: 1994 Truck ECM ??
- From: Ludis Langens <ludis@cruzers.com>
- Re: BinEditor Standard Configs?
- From: rr <RRauscher@nni.com>
- Re: $32 - '165 ecu file ?
- From: romans@starstream.net (Romans, Mark)
- Re: 1994 Truck ECM ??
- Re: $32 - '165 ecu file ?
- From: "Programmer" <nwester@eidnet.org>
- Re: 1994 Truck ECM ??
- From: "Programmer" <nwester@eidnet.org>
- Re: 1994 Truck ECM ??
- Re: 1994 Truck ECM ??
- Re: 1994 Truck ECM ??
- From: Speartech <speartec@iquest.net>
- RE: 1994 Truck ECM ??
- From: "David Cooley" <n5xmt@triad.rr.com>
- RE: 1994 Truck ECM ??
- From: "David Cooley" <n5xmt@triad.rr.com>
- Re: 1994 Truck ECM ??
- From: "Programmer" <nwester@eidnet.org>
- Ecm role expanding?
- From: "Dave Zug." <dzug@delanet.com>
- Re: Ecm role expanding?
- From: "Bruce Plecan" <nacelp@bright.net>
- Auto Power Environment
- From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
- Re: Ecm role expanding?
- Re: Ecm role expanding?
- RE: Auto Power Environment
- From: Eric Bryant <BRYANTE@ghsp.com>
- Re: Auto Power Environment
- Re: Auto Power Environment
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- RE: Auto Power Environment
- From: Tim Welden <twelden@evolving.com>
- RE: Auto Power Environment
- From: Eric Bryant <BRYANTE@ghsp.com>
- RE: Auto Power Environment
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Auto Power Environment
- From: John_Calabrese@ENGELHARD.COM
- RE: Auto Power Environment
- From: don.broadus@exeloncorp.com
- RE: Some questions on DIY EGOR schematics
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Auto Power Environment
- From: Tim Welden <twelden@evolving.com>
- RE: Auto Power Environment
- RE: Ecm role expanding?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Injector question
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: Auto Power Environment
- From: Ludis Langens <ludis@cruzers.com>
- Re: Injector question
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Bruce's Car of the Month...
- Re: Ecm role expanding?
- From: Len Sabatine <sabatine@epix.net>
- Re: Injector question
- From: Len Sabatine <sabatine@epix.net>
- Re: Ecm role expanding?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Auto Power Environment
- From: Len Sabatine <sabatine@epix.net>
- drive by wire and 42V
- Re: Ecm role expanding?
- From: Len Sabatine <sabatine@epix.net>
- Re: Ecm role expanding?
- From: Shannen Durphey <shannen@grolen.com>
- RE: Auto Power Environment
- From: Marc Piccioni <piccioni@cadvision.com>
- RE: Ecm role expanding?
- From: "Jake Kooser" <jake_k@attglobal.net>
- RE: Ecm role expanding?
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- Re: Ecm role expanding?
- From: "Kevin R" <KEReyn@gte.net>
- 7747 related questions
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: Distributorless ignition (I'm new around here)
- From: "Daniel Collins" <bossute@one.net.au>
- Compilers (human) needed
- From: Ludis Langens <ludis@cruzers.com>
- Re: 7747 related questions
- From: Ludis Langens <ludis@cruzers.com>
- PWMs... What are they?
- From: Richard Wakeling <kojab@optushome.com.au>
- All set with digests
- From: Shannen Durphey <shannen@grolen.com>
- Re: 7747 related questions
- From: Shannen Durphey <shannen@grolen.com>
- Re: 7747 related questions
- From: Shannen Durphey <shannen@grolen.com>
- Re: 7747 related questions
- Re: 7747 related questions
- Re: Ecm role expanding?
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Ecm role expanding?
- From: "Rex Weatherford" <rexweatherford@home.com>
- Re: Ecm role expanding?
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- RE: drive by wire and 42V
- From: Eric Bryant <BRYANTE@ghsp.com>
- Re: Ecm role expanding?
- RE: Ecm role expanding?
- From: Eric Bryant <BRYANTE@ghsp.com>
- Re: Ecm role expanding?
- From: Len Sabatine <sabatine@epix.net>
- RE: drive by wire and 42V
- From: Len Sabatine <sabatine@epix.net>
- Re: drive by wire and 42V
- From: Shannen Durphey <shannen@grolen.com>
- Re: Off: GM_Ecm role expanding into ABS?
- From: Shannen Durphey <shannen@grolen.com>
- Re: Ecm role expanding?
- RE: drive by wire and 42V
- From: Eric Bryant <BRYANTE@ghsp.com>
- RE: drive by wire and 42V
- From: Eric Bryant <BRYANTE@ghsp.com>
- RE: Ecm role expanding?
- From: Eric Bryant <BRYANTE@ghsp.com>
- RE: Ecm role expanding?
- From: "Eric Aos" <eoa@spartek.com>
- Re: Ecm role expanding?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ecm role expanding?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Distributorless ignition (I'm new around here)
- From: steve ravet <sravet@arm.com>
- Re: Distributorless ignition (I'm new around here)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Distributorless ignition (I'm new around here)
- From: "Drew Skinner" <drew.skinner@lcra.org>
- Re: Distributorless ignition (I'm new around here)
- From: "Bruce Plecan" <nacelp@bright.net>
- Injector Size on Chevy 3.1 V6
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Distributorless ignition (I'm new around here)
- RE: Distributorless ignition (I'm new around here)
- From: Eric Bryant <BRYANTE@ghsp.com>
- Re: Distributorless ignition (I'm new around here)
- From: "Drew Skinner" <drew.skinner@lcra.org>
- RE: Distributorless ignition (I'm new around here)
- From: "Guenther, Max [ASCO/PA]" <Mguenther@ASCO.COM>
- Re: Distributorless ignition (I'm new around here)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ecm role expanding?
- From: Squash <realsquash@yahoo.com>
- Re: Distributorless ignition (I'm new around here)
- Re: PWMs... What are they?
- From: Peter Gargano <peter@techedge.com.au>
- Re: Distributorless ignition (I'm new around here)
- From: Speartech <speartec@iquest.net>
- Re: Ecm role expanding?
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Compilers (human) needed
- From: "Programmer" <nwester@eidnet.org>
- Re: Ecm role expanding?
- From: Bob Valentine <bob@tecmark.com>
- Re: PWMs... What are they?
- From: Ludis Langens <ludis@cruzers.com>
- Re: Ecm role expanding?
- From: Shannen Durphey <shannen@grolen.com>
- Re: Distributorless ignition (I'm new around here)
- From: Frank F Parker <fparker@umich.edu>
- Re: Ecm role expanding?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Distributorless ignition (I'm new around here)
- From: "Darryl & Karen Smith" <darrylkarensmith@netzero.net>
- RE: drive by wire and 42V
- From: Len Sabatine <sabatine@epix.net>
- Re: Distributorless ignition (I'm new around here)
- From: "Darryl & Karen Smith" <darrylkarensmith@netzero.net>
- Re: Off: GM_Ecm role expanding into ABS?
- From: Len Sabatine <sabatine@epix.net>
- Re: Distributorless ignition (I'm new around here)
- From: Len Sabatine <sabatine@epix.net>
- Re: Distributorless ignition (I'm new around here)
- From: Len Sabatine <sabatine@epix.net>
- Re: Ecm role expanding?
- From: Len Sabatine <sabatine@epix.net>
- Re: Distributorless ignition (I'm new around here)
- From: Len Sabatine <sabatine@epix.net>
- Re: Distributorless ignition (I'm new around here)
- From: Shannen Durphey <shannen@grolen.com>
- Re: Distributorless ignition (I'm new around here)
- From: "Bruce Plecan" <nacelp@bright.net>
- Winbin problems
- From: "Mathieu Blais" <fireb76@videotron.ca>
- Re: eprom for 747
- From: "Mathieu Blais" <fireb76@videotron.ca>
- Re: Bruce's Car of the Month...
- From: "Jim Cottrill" <jim20_98@yahoo.com>
- Re: Distributorless ignition (I'm new around here)
- Re: eprom for 747
- From: Ludis Langens <ludis@cruzers.com>
- Re: Distributorless ignition (I'm new around here)
- From: Len Sabatine <sabatine@epix.net>
- Re: Winbin problems
- From: Len Sabatine <sabatine@epix.net>
- Re: Injector Size on Chevy 3.1 V6
- From: "D. Barry Stubbs" <z24man@earthlink.net>
- Re: Ecm role expanding?
- From: steve ravet <sravet@arm.com>
- Re: eprom for 747
- From: "Kevin R" <KEReyn@gte.net>
- Re: PWMs... What are they?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Winbin problems
- From: "Programmer" <nwester@eidnet.org>
- Re: Ecm role expanding?
- From: sapearso@collins.rockwell.com
- RE: drive by wire and 42V
- From: sapearso@collins.rockwell.com
- Re: Bruce's Car of the Month...
- Re: Ecm role expanding?
- Re: Ecm role expanding?
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- RE: Ecm role expanding?
- From: Eric Bryant <BRYANTE@ghsp.com>
- RE: eprom for 747
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Ecm role expanding?
- From: Eric Bryant <BRYANTE@ghsp.com>
- RE: Ecm role expanding?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Transez. was:New bin...
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Ecm role expanding?
- RE: Ecm role expanding?
- From: Eric Bryant <BRYANTE@ghsp.com>
- Quick update of AFRModifier
- From: timsiford@hushmail.com
- RE: Ecm role expanding?
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Bruce's Car of the Month...
- Fuel Injector list?
- From: "Rex Weatherford" <rexweatherford@home.com>
- Anyone working with this one?
- From: "Rex Weatherford" <rexweatherford@home.com>
- Re: Ecm role expanding?
- From: "Rich Vandervoort" <richvandervoort@hotmail.com>
- Re: Transez. was:New bin...
- From: romans@starstream.net (Romans, Mark)
- Re: Quick update of AFRModifier
- From: romans@starstream.net (Romans, Mark)
- Re: Fuel Injector list?
- From: "Patrick G. Moore" <patm@cais.com>
- Re: Quick update of AFRModifier
- From: Len Sabatine <sabatine@epix.net>
- Re: Anyone working with this one?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Anyone working with this one?
- From: Ludis Langens <ludis@cruzers.com>
- Re: Transez. was:New bin...
- From: Ludis Langens <ludis@cruzers.com>
- Re: Anyone working with this one?
- From: Shannen Durphey <shannen@grolen.com>
- Fw: PWMs... What are they?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Quick update of AFRModifier
- From: timsiford@hushmail.com
- Fw: Fw: PWMs... What are they?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Ecm role expanding?
- From: sapearso@collins.rockwell.com
- PWMs, 3FXXs and personal opinions.
- From: Richard Wakeling <kojab@optushome.com.au>
- Re: Ecm role expanding?Re: GMECM Digest V2 #667
- From: "Swayze" <kswayze@bellsouth.net>
- Re: PWMs, 3FXXs and personal opinions.
- Re: PWMs, 3FXXs and personal opinions.
- From: Len Sabatine <sabatine@epix.net>
- Re: Ecm role expanding?Re: GMECM Digest V2 #667
- From: Len Sabatine <sabatine@epix.net>
- Re: Anyone working with this one?
- From: "Rex Weatherford" <rexweatherford@home.com>
- AYSZ bin
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- RE: PWMs, 3FXXs and personal opinions.
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Reading Plugs
- From: timsiford@hushmail.com
- Re: AYSZ bin
- From: "Programmer" <nwester@eidnet.org>
- Re: Reading Plugs
- Re: Reading Plugs
- From: "DALE GROAH" <dgrow@cfw.com>
- Re: The Honda O2 sensor. Wide band module.
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Reading Plugs
- From: Tim Welden <twelden@evolving.com>
- CheckSum calculation ... ATTN Dave Zug
- From: timsiford@hushmail.com
- RE: Reading Plugs
- From: Len Sabatine <sabatine@epix.net>
- RE: The Honda O2 sensor. Wide band module.
- From: Steven Shonk <Sshonk@barrettgrp.com>
- Need a 7165 ECM
- Re: Reading Plugs
- From: steve ravet <sravet@arm.com>
- Re: Need a 7165 ECM
- Re: The Honda O2 sensor. Wide band module.
- From: rr <RRauscher@nni.com>
- Re: AYSZ bin
- From: rr <RRauscher@nni.com>
- Re: Need a 7165 ECM
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Need a 7165 ECM
- Re: Need a 7165 ECM
- Re: Need a 7165 ECM
- Re: Need a 7165 ECM
- From: steve ravet <sravet@arm.com>
- Re: Need a 7165 ECM
- From: "Bruce Plecan" <nacelp@bright.net>
- [ADMIN] Expectations of privacy
- Re: Need a 7165 ECM
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: AYSZ bin
- From: "Phil Rickard" <vettebuilder@skyenet.net>
- Fw: [ADMIN] Expectations of privacy
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: AYSZ bin
- From: Ludis Langens <ludis@cruzers.com>
- Re: Need a 7165 ECM
- From: "Programmer" <nwester@eidnet.org>
- Re: PWMs, 3FXXs and personal opinions..
- From: "Kevin R" <KEReyn@gte.net>
- Re: PWMs, 3FXXs and personal opinions..
- From: "Programmer" <nwester@eidnet.org>
- Re: AYSZ bin
- From: Shawn Lin <slin01@mail.orion.org>
- Re: Reading Plugs
- From: "David Tuschhoff" <davidlt@i-55.com>
- Policy letter, at CSH, HQ
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Need a 7165 ECM
- From: romans@starstream.net (Romans, Mark)
- Re: PWMs, 3FXXs and personal opinions..
- From: "Dave Zug" <dzug@delanet.com>
- Re: Need a 7165 ECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: PWMs, 3FXXs and personal opinions..
- From: Len Sabatine <sabatine@epix.net>
- RE: Policy letter, at CSH, HQ
- From: "Jake Kooser" <jake_k@attglobal.net>
- Emulator gone bonkers
- From: Keith <kgil1@tampabay.rr.com>
- Re: Policy letter, at CSH, HQ
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Need a 7165 ECM
- From: romans@starstream.net (Romans, Mark)
- jumps to memory - LT1 8051 T side
- From: Dale Klein <daklein@netzero.net>
- Re: Emulator gone bonkers
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: PWMs, 3FXXs and personal opinions..
- From: "TK" <terryk@foothill.net>
- Re: Policy letter, at CSH, HQ
- Re: Need a 7165 ECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Emulator gone bonkers
- From: "David Papworth" <papworth@ichips.intel.com>
- Re: Policy letter, at CSH, HQ
- From: "Bruce Plecan" <nacelp@bright.net>
- WB O2 Calibrations
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: PWMs, 3FXXs and personal opinions.
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: AYSZ bin
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Need a 7165 ECM
- Re: Emulator gone bonkers
- Re: Emulator gone bonkers
- Re: Anyone working with this one?
- From: "Rex Weatherford" <rexweatherford@home.com>
- RE: The Honda O2 sensor. Wide band module.
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Need a 7165 ECM
- From: "Craig Marcho" <marcho@flash.net>
- Re: Emulator gone bonkers
- From: Keith <kgil1@tampabay.rr.com>
- Re: Emulator gone bonkers
- From: Keith <kgil1@tampabay.rr.com>
- RE: PWMs, 3FXXs and personal opinions.
- From: Len Sabatine <sabatine@epix.net>
- Re: Emulator gone bonkers
- From: Keith <kgil1@tampabay.rr.com>
- Re: Need a 7165 ECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Emulator gone bonkers
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Anyone working with this one?
- From: steve ravet <sravet@arm.com>
- Re: Anyone working with this one?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Anyone working with this one?
- From: "Rex Weatherford" <rexweatherford@home.com>
- RE: PWMs, 3FXXs and personal opinions.
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- HO Quad 4 and Race bin!
- From: romans@starstream.net (Romans, Mark)
- Re: Anyone working with this one?
- From: Shannen Durphey <shannen@grolen.com>
- Re: PWMs, 3FXXs and personal opinions..
- From: "Programmer" <nwester@eidnet.org>
- Re: Need a 7165 ECM
- From: "Programmer" <nwester@eidnet.org>
- Re: PWMs, 3FXXs and personal opinions..
- From: Len Sabatine <sabatine@epix.net>
- RE: Emulator gone bonkers
- From: "Jim Sloan" <leroy@sunflower.com>
- off-list Re: Anyone working with this one?
- From: Bob Valentine <bob@tecmark.com>
- RE: Reading Plugs
- From: Len Sabatine <sabatine@epix.net>
- Re: PWMs, 3FXXs and personal opinions..
- From: "TK" <terryk@foothill.net>
- Re: Need a 7165 ECM
- From: Ludis Langens <ludis@cruzers.com>
- Boost
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: Boost
- From: Jay Carter <JayC@RebelRednecks.Com>
- Re: Need a 7165 ECM
- Re: Need a 7165 ECM
- From: Ludis Langens <ludis@cruzers.com>
- Compilers (human) return success
- From: Ludis Langens <ludis@cruzers.com>
- Re: Boost
- From: "Bob Wooten" <r71chevy@earthlink.net>
- contribution: APFN, GM8746
- From: "Mark G." <chevy89@usa.net>
- Re: Emulator gone bonkers
- From: Len Sabatine <sabatine@epix.net>
- Re: Compilers (human) return success
- From: "Programmer" <nwester@eidnet.org>
- Recent archives?
- From: Daniel Houlton <houlster@inficad.com>
- Re: Boost
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Compilers (human) return success
- From: Ludis Langens <ludis@cruzers.com>
- Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: timsiford@hushmail.com
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Compilers (human) return success
- From: "Programmer" <nwester@eidnet.org>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Daniel Collins" <bossute@one.net.au>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: timsiford@hushmail.com
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Programmer" <nwester@eidnet.org>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: Shannen Durphey <shannen@grolen.com>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: timsiford@hushmail.com
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Programmer" <nwester@eidnet.org>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Dave Zug" <dzug@delanet.com>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Boost
- From: "Bob Wooten" <r71chevy@earthlink.net>
- bithoist -- Help for the compiler challenged
- From: "David Papworth" <papworth@ichips.intel.com>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Dave Zug" <dzug@delanet.com>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Dan Townsend" <xybertron@cox-internet.com>
- Re: Boost
- From: "Dave Zug" <dzug@delanet.com>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Boost
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Emulator gone bonkers
- From: "NickG" <nikog@mediaone.net>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: Shannen Durphey <shannen@grolen.com>
- Re: Emulator gone bonkers
- From: "NickG" <nikog@mediaone.net>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Boost
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: rr <RRauscher@nni.com>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: Len Sabatine <sabatine@epix.net>
- Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons, and valves (with Pics))
- From: Dig <turbodig@yahoo.com>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Dave Zug" <dzug@delanet.com>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons, and valves (with Pics))
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "David Papworth" <papworth@ichips.intel.com>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: Barry Tisdale <btisdale@cybersol.com>
- Re: Emulator gone bonkers
- From: Keith <kgil1@tampabay.rr.com>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: timsiford@hushmail.com
- Re: Emulator gone bonkers
- From: "TK" <terryk@foothill.net>
- Re: bithoist -- Help for the compiler challenged
- From: "Programmer" <nwester@eidnet.org>
- DIS for GMECM
- From: Squash <realsquash@yahoo.com>
- Re: Boost
- From: "Phil Martin" <phil@muts.freeserve.co.uk>
- Re: bithoist -- Help for the compiler challenged
- From: Ludis Langens <ludis@cruzers.com>
- Injector part #5235047
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: Len Sabatine <sabatine@epix.net>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: Len Sabatine <sabatine@epix.net>
- Re: Boost
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: Injector part #5235047
- From: "Dan Townsend" <xybertron@cox-internet.com>
- RE: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons, and valves (with Pics))
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Open/closed loop
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Big thanks to all
- From: timsiford@hushmail.com
- Re: Big thanks to all
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Open/closed loop
- From: "TK" <terryk@foothill.net>
- Re: Open/closed loop
- From: Bob Valentine <bob@tecmark.com>
- Re: Open/closed loop
- From: "Brent" <wildkat@paonline.com>
- Re: Open/closed loop
- From: "TK" <terryk@foothill.net>
- Re: Open/closed loop
- From: "Bob Wooten" <r71chevy@earthlink.net>
- CPU's
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons,
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- LS1 Lean Cruise
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: CPU's
- From: timsiford@hushmail.com
- Re: Big thanks to all
- From: Len Sabatine <sabatine@epix.net>
- RE: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- RE: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
- Re: bithoist -- Help for the compiler challenged
- From: "Programmer" <nwester@eidnet.org>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Programmer" <nwester@eidnet.org>
- Re: CPU's
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIS for GMECM
- From: "mta228" <mta228@yahoo.com>
- Re: DIS for GMECM
- Re: EPROM identification
- Superchips question
- From: "Craig Marcho" <marcho@flash.net>
- New Bins on Incoming....
- From: "Craig Marcho" <marcho@flash.net>
- Re: DIS for GMECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: bithoist -- Help for the compiler challenged
- From: Ludis Langens <ludis@cruzers.com>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Dave Zug." <dzug@delanet.com>
- Re: EPROM identification
- From: Ludis Langens <ludis@cruzers.com>
- Re: CPU's
- From: Ludis Langens <ludis@cruzers.com>
- Re: EPROM identification
- From: "Programmer" <nwester@eidnet.org>
- Re: EPROM identification
- From: "Programmer" <nwester@eidnet.org>
- looking for a 93 4.3 bin - 9734 BBNT
- Re: Superchips question
- From: "Programmer" <nwester@eidnet.org>
- Re: Open/closed loop
- From: Bob Valentine <bob@tecmark.com>
- Re: Injector part #5235047
- Re: Open/closed loop
- From: Carl Ijames <ijames@netaxs.com>
- Re: DIS for GMECM
- From: Shannen Durphey <shannen@grolen.com>
- Re: LS1 Lean Cruise
- From: Dale Klein <daklein@netzero.net>
- Re: CPU's
- From: Shannen Durphey <shannen@grolen.com>
- Re: EPROM identification
- what chip is this?
- From: "Craig Marcho" <marcho@flash.net>
- Re: bithoist -- Help for the compiler challenged
- From: "Programmer" <nwester@eidnet.org>
- Re: EPROM identification
- From: "Programmer" <nwester@eidnet.org>
- Re: what chip is this?
- From: "Programmer" <nwester@eidnet.org>
- Re: EPROM identification
- From: Ludis Langens <ludis@cruzers.com>
- Re: bithoist -- Help for the compiler challenged
- From: Ludis Langens <ludis@cruzers.com>
- Re: EPROM identification
- Re: CPU's
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: Open/closed loop
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: bithoist -- Help for the compiler challenged
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: EPROM identification
- Re: Boost
- From: "Bob Wooten" <r71chevy@earthlink.net>
- 7747 spark control questions
- Free Air Calibration for NTK sensor?
- From: "Chris Bennight" <Christopher_Bennight@baylor.edu>
- Re: Open/closed loop
- From: Bob Valentine <bob@tecmark.com>
- Re: EPROM identification
- From: Bob Valentine <bob@tecmark.com>
- Re: bithoist -- Help for the compiler challenged
- From: Ludis Langens <ludis@cruzers.com>
- Re: EPROM identification
- From: Ludis Langens <ludis@cruzers.com>
- Re: CPU's
- From: Ludis Langens <ludis@cruzers.com>
- Re: eprom for 747
- From: Ludis Langens <ludis@cruzers.com>
- Re: LS1 Lean Cruise
- From: "Daniel Collins" <bossute@one.net.au>
- Decel Enleanment and 7749
- From: "Jeffrey Scott" <jws6367@lycos.com>
- Re: Superchips question
- Suzuki cycle ECUs?
- From: Eric Bryant <BRYANTE@ghsp.com>
- Re: DIS for GMECM
- From: Squash <realsquash@yahoo.com>
- Jargon, Terminology, Terms ....
- From: timsiford@hushmail.com
- Re: Superchips question
- From: "Programmer" <nwester@eidnet.org>
- Re: Superchips question
- From: "Craig Marcho" <marcho@flash.net>
- Re: Decel Enleanment and 7749
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Jargon, Terminology, Terms ....
- From: Shannen Durphey <shannen@grolen.com>
- Re: Jargon, Terminology, Terms ....
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIS for GMECM
- From: Bob Valentine <bob@tecmark.com>
- Re: Jargon, Terminology, Terms ....
- From: timsiford@hushmail.com
- RE: Jargon, Terminology, Terms ....
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- A new MAF location for the Turbo GNs
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Superchips question
- Christmas Wishlist (BCCs)
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: DIS for GMECM
- From: rr <RRauscher@nni.com>
- Re: Jargon, Terminology, Terms ....
- From: rr <RRauscher@nni.com>
- Re: Jargon, Terminology, Terms ....
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIS for GMECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Jargon, Terminology, Terms ....
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Jargon, Terminology, Terms ....
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: A new MAF location for the Turbo GNs
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: DIS for GMECM
- Re: Superchips question
- From: "Programmer" <nwester@eidnet.org>
- Re: DIS for GMECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Superchips question
- From: "Programmer" <nwester@eidnet.org>
- Re: DIS for GMECM
- From: Speartech <speartec@iquest.net>
- Re: DIS for GMECM
- From: Squash <realsquash@yahoo.com>
- Re: DIS for GMECM
- From: Len Sabatine <sabatine@epix.net>
- Re: Boost
- From: "Phil Martin" <phil@muts.freeserve.co.uk>
- Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons, and valves (with Pics))
- From: "Dave Zug" <dzug@delanet.com>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: DIS for GMECM
- From: Carl Ijames <ijames@netaxs.com>
- Re: Christmas Wishlist (BCCs)
- From: Shannen Durphey <shannen@grolen.com>
- Re: DIS for GMECM
- From: "Dave Zug" <dzug@delanet.com>
- Re: DIS for GMECM
- From: "Dave Zug" <dzug@delanet.com>
- Re: EPROM identification
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons,
- From: Dig <turbodig@yahoo.com>
- Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons,
- From: Dig <turbodig@yahoo.com>
- Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons,
- From: Dig <turbodig@yahoo.com>
- Re: Part 2: Reading Plugs, pistons, and valves (with Pics)
- From: "Dave Zug" <dzug@delanet.com>
- Re: DIS for GMECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons,
- From: "Dave Zug" <dzug@delanet.com>
- Re: DIS for GMECM
- From: Speartech <speartec@iquest.net>
- Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons,
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Open/closed loop
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: Christmas Wishlist (BCCs)
- Re: CPU's
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: DIS for GMECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: CPU's
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TPI Runner Question
- Re: Boost
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons, and valves (with Pics))
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: CPU's
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: DIS for GMECM
- From: sapearso@collins.rockwell.com
- Re: 7747 spark tuning for newbies
- tpi for an early jaguar
- From: "Diane Stowe" <DianeS@speakeasy.org>
- Re: tpi for an early jaguar
- Re: TPI Runner Question
- Re: DIS for GMECM
- From: Shannen Durphey <shannen@grolen.com>
- Re: TPI Runner Question
- RE: tpi for an early jaguar
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: LS1 Lean Cruise
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: tpi for an early jaguar
- From: "Diane Stowe" <DianeS@speakeasy.org>
- Re: DIS for GMECM
- From: "Programmer" <nwester@eidnet.org>
- Re: DIS for GMECM
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: DIS for GMECM
- From: Len Sabatine <sabatine@epix.net>
- GM8746 program...
- From: "Mark G." <chevy89@usa.net>
- Re: DIS for GMECM
- From: Len Sabatine <sabatine@epix.net>
- Re: TPI Runner Question
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- Re: TPI Runner Question
- From: timsiford@hushmail.com
- Re: DIS for GMECM
- From: Squash <realsquash@yahoo.com>
- Re: TPI Runner Question
- From: "David Papworth" <papworth@ichips.intel.com>
- Re: TPI Runner Question
- From: timsiford@hushmail.com
- Re: LS1 Lean Cruise
- From: romans@starstream.net (Romans, Mark)
- Re: TPI Runner Question
- Re: LS1 Lean Cruise
- From: romans@starstream.net (Romans, Mark)
- Re: TPI Runner Question
- From: timsiford@hushmail.com
- Re: TPI Runner Question
- Re: DIS for GMECM
- From: "mta228" <mta228@yahoo.com>
- Re: LS1 Lean Cruise
- Re: TPI Runner Question
- From: timsiford@hushmail.com
- Re: DIS for GMECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Code 36: Burnoff Diagnostic Fault
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: TPI Runner Question
- From: "Wayne Johnson" <waynejohnson007@hotmail.com>
- Re: TPI Runner Question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TPI Runner Question
- From: timsiford@hushmail.com
- Re: TPI Runner Question
- From: "Bruce Plecan" <nacelp@bright.net>
- my very small contribution to the list.....
- From: "Craig Marcho" <marcho@flash.net>
- Fw: my very small contribution to the list.....correction
- From: "Craig Marcho" <marcho@flash.net>
- Re: TPI Runner Question
- From: "Wayne Johnson" <WayneJohnson007@hotmail.com>
- Re: TPI Runner Question
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: my very small contribution to the list.....
- From: "Mark S. Riley" <turbotuneusltd@triad.rr.com>
- ION
- From: rr <RRauscher@nni.com>
- RE: my very small contribution to the list.....
- From: "Craig Marcho" <marcho@flash.net>
- Re: tpi for an early jaguar
- Re: bithoist -- Help for the compiler challenged
- From: Shannen Durphey <shannen@grolen.com>
- Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons,
- From: Shannen Durphey <shannen@grolen.com>
- more papers
- From: rr <RRauscher@nni.com>
- Re: ION
- From: steve ravet <sravet@arm.com>
- ION
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: DIS for GMECM
- From: Shannen Durphey <shannen@grolen.com>
- Re: Code 36: Burnoff Diagnostic Fault
- From: Shannen Durphey <shannen@grolen.com>
- Re: TPI Runner Question
- From: Shannen Durphey <shannen@grolen.com>
- Re: LS1 Lean Cruise
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ION
- From: Shannen Durphey <shannen@grolen.com>
- Re: LS1 Lean Cruise
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: ION
- From: rr <RRauscher@nni.com>
- Re: my very small contribution to the list.....
- From: Tyler Townsley <ttownsley@sprynet.com>
- Re: GMECM Digest V2 #685
- From: Bill Shaw <bshaw@connix.com>
- Re: LS1 Lean Cruise
- From: romans@starstream.net (Romans, Mark)
- Re: Code 36: Burnoff Diagnostic Fault
- From: romans@starstream.net (Romans, Mark)
- Re: DIS for GMECM
- From: "Programmer" <nwester@eidnet.org>
- Re: LS1 Lean Cruise
- From: rr <RRauscher@nni.com>
- Re: tpi for an early jaguar
- From: "Matthew Johnson" <mjohnson@primus-sterilizer.com>
- Re: ION
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: ION
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- Re: LS1 Lean Cruise
- From: Carl Ijames <ijames@netaxs.com>
- Re: tpi for an early jaguar
- From: "Diane Stowe" <DianeS@speakeasy.org>
- Re: LS1 Lean Cruise
- From: Stephen.Kaminska@HSC.com
- Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons, and valves (with Pics))
- From: "Dave Zug" <dzug@delanet.com>
- Re: LS1 Lean Cruise
- From: romans@starstream.net (Romans, Mark)
- 6.5L Diseasal PCM query.
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- RE: LS1 Lean Cruise
- From: Mika.Helander@softbit.fi
- Re: 6.5L Diseasal PCM query.
- From: Ludis Langens <ludis@cruzers.com>
- RE: LS1 Lean Cruise
- Re: LS1 Lean Cruise
- Re: LS1 Lean Cruise
- From: "Bruce Plecan" <nacelp@bright.net>
- TPI for Chevy truck
- From: sapearso@collins.rockwell.com
- Re: LS1 Lean Cruise
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: LS1 Lean Cruise
- Re: LS1 Lean Cruise
- 165 schematics and O2 circuit
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: LS1 Lean Cruise
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIS for GMECM
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: TPI Runner Question
- Re: TPI for Chevy truck
- From: "Matthew Johnson" <mjohnson@primus-sterilizer.com>
- Re: TPI for Chevy truck
- From: Squash <realsquash@yahoo.com>
- Re: TPI for Chevy truck
- From: "Programmer" <nwester@eidnet.org>
- Re: LS1 Lean Cruise
- Re: LS1 Lean Cruise
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: TPI for Chevy truck
- From: Bob Valentine <bob@tecmark.com>
- ATND bin
- From: "Darryl & Karen Smith" <darrylkarensmith@netzero.net>
- Re: DIS for GMECM
- From: "Darryl & Karen Smith" <darrylkarensmith@netzero.net>
- Re: DIS for GMECM
- From: "Darryl & Karen Smith" <darrylkarensmith@netzero.net>
- Re: LS1 Lean Cruise
- From: Len Sabatine <sabatine@epix.net>
- Re: 165 schematics and O2 circuit
- From: Ludis Langens <ludis@cruzers.com>
- Re: tpi for an early jaguar
- Re: tpi for an early jaguar
- Re: DIS for GMECM
- From: Shannen Durphey <shannen@grolen.com>
- Re: TPI for Chevy truck
- From: Shannen Durphey <shannen@grolen.com>
- Re: GMECM Digest V2 #685
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons, and valves (with Pics))
- From: "Bob Wooten" <r71chevy@earthlink.net>
- GMECM Emails!
- From: romans@starstream.net (Romans, Mark)
- Re: LS1 Lean Cruise
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: tpi for an early jaguar
- From: "Diane Stowe" <DianeS@speakeasy.org>
- Re: TPI for Chevy truck
- From: Vance Rose <javer96@snowcrest.net>
- DIY-EGOR schematics
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: TPI for Chevy truck
- From: Bob Valentine <bob@tecmark.com>
- Re: GMECM Emails!
- From: Ludis Langens <ludis@cruzers.com>
- Re: DIS for GMECM
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: GMECM Emails!
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: DIY-EGOR schematics
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: DIY-EGOR schematics
- From: steve ravet <sravet@arm.com>
- Re: tpi for an early jaguar
- From: romans@starstream.net (Romans, Mark)
- BANF
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: BANF
- From: "Bruce Plecan" <nacelp@bright.net>
- Fw: Min. air / minTPS / Holes in Butterflies.
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: tpi for an early jaguar
- From: "Diane Stowe" <DianeS@speakeasy.org>
- Hiway for the '747
- From: rr <RRauscher@nni.com>
- FS: ECM and wiring harness from TBI S-truck
- Re: TPI for Chevy truck
- From: Ludis Langens <ludis@cruzers.com>
- Re: DIS for GMECM
- From: Speartech <speartec@iquest.net>
- Re: Hiway for the '747
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: tpi for an early jaguar
- From: romans@starstream.net (Romans, Mark)
- Re: DIS for GMECM
- From: Speartech <speartec@iquest.net>
- b & d body odb1 & 2
- From: Dale Klein <daklein@netzero.net>
- Re: b & d body odb1 & 2
- From: "Programmer" <nwester@eidnet.org>
- Re: tpi for an early jaguar
- Re: tpi for an early jaguar
- From: "Diane Stowe" <DianeS@speakeasy.org>
- Re: DIS for GMECM
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: tpi for an early jaguar
- From: "Bob Wooten" <r71chevy@earthlink.net>
- New version of BitHoist
- From: Ludis Langens <ludis@cruzers.com>
- Re: New version of BitHoist
- From: Ludis Langens <ludis@cruzers.com>
- Re: b & d body odb1 & 2
- From: Scott & Jennifer Peitzsch <jlg-sep@mediaone.net>
- Re: b & d body odb1 & 2
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: tpi for an early jaguar
- From: romans@starstream.net (Romans, Mark)
- Re: DIS for GMECM
- From: Len Sabatine <sabatine@epix.net>
- Re: b & d body odb1 & 2
- From: Len Sabatine <sabatine@epix.net>
- Re: DIS for GMECM
- From: Len Sabatine <sabatine@epix.net>
- Re: tpi for an early jaguar
- From: "Diane Stowe" <DianeS@speakeasy.org>
- Re: DIS for GMECM
- Re: DIS for GMECM
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: DIS for GMECM
- Re: DIS for GMECM
- From: Len Sabatine <sabatine@epix.net>
- Re: DIS for GMECM
- From: Len Sabatine <sabatine@epix.net>
- Injector Sizes All the Same?
- Re: Injector Sizes All the Same?
- From: chetwagner@qwest.net
- need help Programming '165 Memcal
- From: "Craig Marcho" <marcho@flash.net>
- converting a GM non computer hei distributor to a computer hei
- From: "Diane Stowe" <DianeS@speakeasy.org>
- Re: need help Programming '165 Memcal
- From: Richard Wakeling <kojab@optushome.com.au>
- new papers on gmecm
- From: steve ravet <sravet@arm.com>
- RE: need help Programming '165 Memcal
- From: "Craig Marcho" <marcho@flash.net>
- Re: converting a GM non computer hei distributor to a computer hei
- From: Bob Valentine <bob@tecmark.com>
- RE: need help Programming '165 Memcal
- Recent archives?
- From: Daniel Houlton <houlster@inficad.com>
- TC lock/unlock?
- Re: converting a GM non computer hei distributor to a computer hei
- LT1 DIS or CoilNearPlug Almost here
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: need help Programming '165 Memcal
- From: Richard Wakeling <kojab@optushome.com.au>
- Re: need help Programming '165 Memcal
- From: "Craig Marcho" <marcho@flash.net>
- Re: new papers on gmecm
- From: rr <RRauscher@nni.com>
- Re: converting a GM non computer hei distributor to a computer hei
- From: Bob Valentine <bob@tecmark.com>
- Re: converting a GM non computer hei distributor to a computer hei
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: converting a GM non computer hei distributor to a computer hei
- Re: LT1 DIS or CoilNearPlug Almost here
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: LT1 DIS or CoilNearPlug Almost here
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: LT1 DIS or CoilNearPlug Almost here
- From: Len Sabatine <sabatine@epix.net>
- Re: LT1 DIS or CoilNearPlug Almost here
- From: rah@horizon.hit.net
- what programming voltage?
- From: "Craig Marcho" <marcho@flash.net>
- Misc Info
- From: "Bob Wooten" <r71chevy@earthlink.net>
- [Fwd: DIY_EFI_WWW]
- From: steve ravet <sravet@arm.com>
- Re: converting a GM non computer hei distributor to a computer hei
- From: Bob Valentine <bob@tecmark.com>
- Re: converting a GM non computer hei distributor to a computer hei
- Re: need help Programming '165 Memcal
- From: Ludis Langens <ludis@cruzers.com>
- Re: strange check engine light
- Re: LT1 DIS or CoilNearPlug Almost here
- From: Len Sabatine <sabatine@epix.net>
- RE: need help Programming '165 Memcal
- From: "Craig Marcho" <marcho@flash.net>
- Re: DIY_EFI_WWW]
- From: "Rex Weatherford" <rexweatherford@home.com>
- Sorry for this simple connector question
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Quad4 ANMS and AXRM tables
- From: "Rex Weatherford" <rexweatherford@home.com>
- Re: DIY_EFI_WWW]
- From: Shannen Durphey <shannen@grolen.com>
- Detonation 101
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: New version of BitHoist
- From: "Rex Weatherford" <rexweatherford@home.com>
- new bin
- From: "Programmer" <nwester@eidnet.org>
- Re: Detonation 101
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Detonation 101
- From: "Todd Burkard" <toddburkard@pcmc.com>
- Re: Sorry for this simple connector question
- Re: New version of BitHoist
- From: Shannen Durphey <shannen@grolen.com>
- Re: new bin
- From: Shannen Durphey <shannen@grolen.com>
- Re: Sorry for this simple connector question
- From: Ludis Langens <ludis@cruzers.com>
- Re: Detonation 101
- From: Matt S Bower <m.s.bower@cummins.com>
- Re: New version of BitHoist
- From: Ludis Langens <ludis@cruzers.com>
- Re: Sorry for this simple connector question
- From: Ludis Langens <ludis@cruzers.com>
- Re: New version of BitHoist
- From: "Rex Weatherford" <rexweatherford@home.com>
- Re: Quad4 ANMS and AXRM tables
- From: Ludis Langens <ludis@cruzers.com>
- This just in
- From: "Bruce Plecan" <nacelp@bright.net>
- RE: Sorry for this simple connector question
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Sorry for this simple connector question
- From: steve ravet <sravet@arm.com>
- Re: Detonation 101
- Re: Detonation 101
- Re: Detonation 101
- From: "den Broeder, Ernst" <edenbroe@cisco.com>
- RE: Detonation 101
- From: Tim Welden <twelden@evolving.com>
- RE: Sorry for this simple connector question
- From: "Marteney, Steven J." <smarteney@xlvision.com>
- Re: Detonation 101
- From: Len Sabatine <sabatine@epix.net>
- Re: Quad4 ANMS and AXRM tables
- From: Shannen Durphey <shannen@grolen.com>
- RE: Sorry for this simple connector question
- Re: new bin
- From: "Programmer" <nwester@eidnet.org>
- Mapping a v6 MAF...
- From: Shannen Durphey <shannen@grolen.com>
- Re: Detonation 101
- Re: Quad4 ANMS and AXRM tables
- From: "Programmer" <nwester@eidnet.org>
- Re: Detonation 101
- From: sapearso@collins.rockwell.com
- Re: Sorry for this simple connector question
- From: Ludis Langens <ludis@cruzers.com>
- Re: Quad4 ANMS and AXRM tables
- From: "Rex Weatherford" <rexweatherford@home.com>
- Re: 4L60E - was new bin
- Re: Mapping a v6 MAF...
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: 4L60E - was new bin
- Re: strange check engine light
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: 4L60E - was new bin
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 4L60E - was new bin
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Re: Mapping a v6 MAF...
- From: Shannen Durphey <shannen@grolen.com>
- Re: 4L60E - was new bin
- From: "Tom Matthews" <tmatthew@stny.rr.com>
- Re: strange check engine light
- Re: 4L60E - was new bin
- From: "Diane Stowe" <DianeS@speakeasy.org>
- RE: 4L60E - was new bin
- From: Reid Bishop <rbish@ibm.net>
- RE: 4L60E - was new bin
- From: Mika.Helander@softbit.fi
- Re: 4L60E - was new bin
- From: steve ravet <sravet@arm.com>
- Re: 4L60E - was new bin
- From: "gary king" <gdkng@hotmail.com>
- Re: 4L60E - was new bin
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: 4L60E - was new bin
- From: "Programmer" <nwester@eidnet.org>
- Re: 4L60E - was new bin
- From: Daniel Houlton <houlster@inficad.com>
- Re: strange check engine light
- From: monte vogt <mvogt@enardo.com>
- Re: 4L60E - was new bin
- '730 in a '73
- Re: '730 in a '73
- From: "Programmer" <nwester@eidnet.org>
- Re: '730 in a '73
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: 4L60E - was new bin
- From: "Bob Wooten" <r71chevy@earthlink.net>
- Ramjet
- From: "Darryl & Karen Smith" <darrylkarensmith@netzero.net>
- Re: strange check engine light
- Re: '730 in a '73
- From: Bob Valentine <bob@tecmark.com>
- Re: strange check engine light
- From: Bob Valentine <bob@tecmark.com>
- Re: Misc Info
- From: Bob Valentine <bob@tecmark.com>
- Re: Ramjet
- From: Shannen Durphey <shannen@grolen.com>
- Re: Ramjet
- From: Michael Davis <davis@mail.eecis.udel.edu>
- Re: Ramjet
- Re: strange check engine light
- Programmer questions... which brand?
- From: "Craig Marcho" <marcho@flash.net>
- Re: Programmer questions... which brand?
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '730 in a '73
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Programmer questions... which brand?
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: Programmer questions... which brand?
- From: monte vogt <mvogt@enardo.com>
- Re: '730 in a '73
- From: "Dave Zug." <dzug@delanet.com>
- Re: '730 in a '73
- Re: '730 in a '73
- From: "Bruce Plecan" <nacelp@bright.net>
- 747 VSS Question
- From: Bob Valentine <bob@tecmark.com>
- Re: 747 VSS Question
- From: "Bruce Plecan" <nacelp@bright.net>
- Was Ramjet now L31
- From: Marc Piccioni <piccioni@cadvision.com>
- Re: 747 VSS Question
- From: Bob Valentine <bob@tecmark.com>
- MEFI
- From: "John Martin" <gm.man@gte.net>
- Re: 747 VSS Question
- From: rr <RRauscher@nni.com>
- Re: 747 VSS Question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: '730 in a '73
- From: Ludis Langens <ludis@cruzers.com>
- Request for Diagnostic help (sorta NC)
- From: "Brent" <wildkat@paonline.com>
- Re: Was Ramjet now L31
- From: Shannen Durphey <Shannen@grolen.com>
- Re: 747 VSS Question
- From: Shannen Durphey <Shannen@grolen.com>
- Re: 747 VSS Question
- From: Shannen Durphey <Shannen@grolen.com>
- Re: Request for Diagnostic help (sorta NC)
- From: Shannen Durphey <Shannen@grolen.com>
- Re: 747 VSS Question
- From: Shannen Durphey <Shannen@grolen.com>
- Re: Fumblefingers and 747 VSS Question
- From: Shannen Durphey <Shannen@grolen.com>
- Re: Request for Diagnostic help (sorta NC)
- From: "Programmer" <nwester@eidnet.org>
- Re: Request for Diagnostic help (sorta NC)
- From: "Programmer" <nwester@eidnet.org>
- Re: Request for Diagnostic help (sorta NC)
- Re: 747 VSS Question
- From: rr <RRauscher@nni.com>
- Re: 747 VSS Question
- From: rr <RRauscher@nni.com>
- Re: Request for Diagnostic help (sorta NC)
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Request for Diagnostic help (sorta NC)
- From: "Daniel E. Griffin" <slowfatslug@hotmail.com>
- Re: Was Ramjet now L31
- vortec heads
- Re: vortec heads
- Re: vortec heads
- Re: Request for Diagnostic help (sorta NC)
- Olds 350 donor
- From: Bill Shaw <bshaw@connix.com>
- o2 sensor location
- From: "Diane Stowe" <DianeS@speakeasy.org>
- Re: 747 VSS Question
- From: Shannen Durphey <Shannen@grolen.com>
- Re: o2 sensor location
- From: Len Sabatine <sabatine@epix.net>
- Re: Olds 350 donor
- From: Len Sabatine <sabatine@epix.net>
- Re: vortec heads
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: o2 sensor location
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: vortec heads
- Where to find Vortec FI parts?
- Re: Olds 350 donor
- From: Bob Valentine <bob@tecmark.com>
- Re: Where to find Vortec FI parts?
- From: Shannen Durphey <Shannen@grolen.com>
- Re: Olds 350 donor
- From: romans@starstream.net (Romans, Mark)
- Re: o2 sensor location
- From: romans@starstream.net (Romans, Mark)
- Re: vortec heads
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Where to find Vortec FI parts?
- Re: vortec heads
- From: romans@starstream.net (Romans, Mark)
- VSS question
- From: "TK" <terryk@foothill.net>
- Re: Request for Diagnostic help (sorta NC)
- From: "Darryl & Karen Smith" <darrylkarensmith@netzero.net>
- Re: VSS question
- From: "TK" <terryk@foothill.net>
- Re: Where to find Vortec FI parts?
- From: Speartech <speartec@iquest.net>
- Re: VSS question
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: vortec heads
- MEFI info...
- From: Shannen Durphey <Shannen@grolen.com>
- Re: VSS question
- From: "Programmer" <nwester@eidnet.org>
- Re: Olds 350 donor
- Re: 747 VSS Question
- From: rr <RRauscher@nni.com>
- Re: Olds 350 donor
- From: Bill Shaw <bshaw@connix.com>
- Re: VSS question
- From: "TK" <terryk@foothill.net>
- Re: Olds 350 donor
- From: Len Sabatine <sabatine@epix.net>
- Re: vortec heads
- From: Len Sabatine <sabatine@epix.net>
- Re: Olds 350 donor
- From: Bob Valentine <bob@tecmark.com>
- Re: Olds 350 donor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Olds 350 donor
- Re: Olds 350 donor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Olds 350 donor
- From: Bob Valentine <bob@tecmark.com>
- Re: Olds 350 donor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Olds 350 donor
- Re: Olds 350 donor
- From: Shannen Durphey <Shannen@grolen.com>
- Re: Olds 350 donor
- From: Shannen Durphey <Shannen@grolen.com>
- Re: Olds 350 donor
- From: Shannen Durphey <Shannen@grolen.com>
- Re: Olds 350 donor
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Olds 350 donor
- From: Shannen Durphey <Shannen@grolen.com>
- Re: Olds 350 donor
- Caprice motor swap...was Re: Olds 350 donor
- Re:Olds 350 donor
- From: sapearso@collins.rockwell.com
- Re: Re:Olds 350 donor
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- RE: vortec heads
- From: Eric Bryant <BRYANTE@ghsp.com>
- '84 Vette Digital Dash
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- RE: vortec heads
- From: Tim Welden <twelden@evolving.com>
- Re: '84 Vette Digital Dash
- From: "Bruce Plecan" <nacelp@bright.net>
- L98 Rev Limiter
- From: "Michael Adams" <michaeladams1@compuserve.com>
- Re: '84 Vette Digital Dash
- From: "Mike Martone" <mmartone@pop800.gsfc.nasa.gov>
- Re: '84 Vette Digital Dash
- From: "Mike Martone" <mmartone@pop800.gsfc.nasa.gov>
- Re: L98 Rev Limiter
- From: romans@starstream.net (Romans, Mark)
- RE: vortec heads
- Re: '84 Vette Digital Dash
- Re: '84 Vette Digital Dash
- From: "Andrew K. Mattei" <amattei@mindspring.com>
- Re: vortec heads
- RE: vortec heads
- From: Tim Welden <twelden@evolving.com>
- Re: L98 Rev Limiter
- From: monte vogt <mvogt@enardo.com>
- Re: '730 in a '73
- From: dave.williams@chaos.lrk.ar.us (Dave Williams)
- GM Connectors
- From: "Mike Turner/ENGR/HQ/KEMET/US" <MikeTurner@kemet.com>
- Re: '730 in a '73
- From: Squash <realsquash@yahoo.com>
- Re: GM Connectors
- From: "Bruce Plecan" <nacelp@bright.net>
- [LIST ADMIN] We appear to be down...
- Re: fuel pump pressure???
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Fw: Hiway for the '747
- Re: fuel pump pressure???
- From: steve ravet <sravet@arm.com>
- [ADMIN] status update
- Re: fuel pump pressure???
- Re: Questions about a table and Table Headers...
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- Re: fuel pump pressure???
- From: "Mike Martone" <mmartone@pop800.gsfc.nasa.gov>
- Re: Questions about a table and Table Headers...
- From: "Rex Weatherford" <rexweatherford@home.com>
- Re: Fw: Hiway for the '747
- From: "Kevin R" <KEReyn@gte.net>
- Re: fuel pump pressure???
- From: mike martone <michael.martone@csoconline.com>
- Re: fuel pump pressure???
- From: Bob Valentine <bob@tecmark.com>
- Re: '730 in a '73
- From: Bob Valentine <bob@tecmark.com>
- Re: fuel pump pressure???
- Re: EGR valve for SBC
- From: Len Sabatine <sabatine@epix.net>
- BBC ECM Applications
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: vortec heads
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: vortec heads
- From: "Bruce Plecan" <nacelp@bright.net>
- misc tpi questions
- From: "Diane Stowe" <DianeS@speakeasy.org>
- Re: misc tpi questions
- Re: BBC ECM Applications
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: misc tpi questions
- From: "Diane Stowe" <DianeS@speakeasy.org>
- Re: fuel pump pressure???
- From: "Walter Sherwin" <wsherwin@home.com>
- Re: fuel pump pressure???
- From: Len Sabatine <sabatine@epix.net>
- Re: Server back/THANK YOU <(©¿©)>
- From: Shannen Durphey <Shannen@grolen.com>
- Re: fuel pump pressure???
- From: Shannen Durphey <Shannen@grolen.com>
- 730 fuel cutoo - spark?
- From: "Dave Zug" <dzug@delanet.com>
- removable chips
- From: "Darryl & Karen Smith" <darrylkarensmith@netzero.net>
- Re: removable chips
- From: Ludis Langens <ludis@cruzers.com>
- Just starting out...
- From: Raven <raven@lewiston.com>
- Re: 730 fuel cutoo - spark?
- From: Ludis Langens <ludis@cruzers.com>
- Follow up
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: BBC ECM Applications
- From: Shannen Durphey <Shannen@grolen.com>
- Re: 730 fuel cutoo - spark?
- From: "Ross Myers" <ponty@axis.jeack.com.au>
- Re: BBC ECM Applications
- From: "Programmer" <nwester@eidnet.org>
- Re: BBC ECM Applications
- From: "Bruce Plecan" <nacelp@bright.net>
- Re: Just starting out...
- From: Shannen Durphey <Shannen@grolen.com>
- Re: 730 fuel cutoo - spark?
- From: romans@starstream.net (Romans, Mark)
- Turbo 3.1 Diagrams
- From: "Jeremy Gonyou" <jgonyou@hotmail.com>
- binssss'
- From: "gary king" <gdkng@hotmail.com>
- Re: EGR valve for SBC
- From: "Gerald Pelnar" <wd0fyf@mpks.net>
- Re: Server back/THANK YOU <( ©¿©)>
- From: sapearso@collins.rockwell.com
- analog board
- From: "Diane Stowe" <DianeS@speakeasy.org>
Mail converted by MHonArc 2.6.11