Re: EGR disabled and Knocking

[JTesta1966@aol.com]

In a message dated 10/12/00 10:43:00 PM Eastern Daylight Time, KEReyn@gte.net 
writes:

<< OK, I'm with Brent on this question. I understand that by not inducing 
inert
 gas into the intake track and then increasing timing and leaning fuel would
 cause knock, but the idea of  0ing out 1b3 is to disable the EGR function so
 that not only does the EGR not function, the mixture shouldn't be leaned and
 the spark not advanced so what's the deal?
  >>

If the ECM never commands EGR then the flag is never set, the ECM doesnt go 
into EGR timing/fuel. Same as raising the EGR enable temp....from what I 
gather anyway :-)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jim Testa                                            TType86 on #BuickGN
jtesta1966@aol.com                               buick.fiendish.net:6667
ASE Master Technician              NJ Lic. Motor Vehicle Inspector
L1 Adv Eng Perf Certified       NJ Licensed Emissions repair Tech
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org