[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Prog 101

To: <gmecm@efi332.eng.ohio-state.edu>
Subject: Re: Prog 101
From: "Bruce Plecan" <nacelp@bright.net>
Date: Thu, 20 Jan 2000 15:28:19 -0500
References: <000401bf6155$40f6e520$0f0a0a0a@kbklaptop.randalls> <002501bf6243$e9573280$9d47e2d8@mjohnson2> <003901bf637c$52a060c0$57fe4118@cgru1.ab.wave.home.com>
Reply-to: gmecm@efi332.eng.ohio-state.edu
Sender: owner-gmecm@esl.eng.ohio-state.edu

All it takes is looking in the archives. Go to the DIY_EFI, and GMECM one, and look for archives. Then under projetcs, or gm ecms look around there.

It doesn't actually hurt to read up, on related mater.

Set EGR enable temp to 255, and disable EGR flag, and never worry about it, cause this is for off road use only

Grumpy

----- Original Message -----

From: Todorovic

To: gmecm@efi332.eng.ohio-state.edu

Sent: Thursday, January 20, 2000 2:27 PM

Subject: Prog 101

Can someone please give me a link to programming 101, where I can find info on how to remove the EGR from TBI systems. Thanks.

Follow-Ups:
- Re: Prog 101
  - From: "Todorovic" <todorovic@home.com>

References:
- RE: Syncing crossfire injection
  - From: "Ken Kelly" <ken73@houston.rr.com>
- Re: Syncing crossfire injection
  - From: "Dave Zug" <dzug@delanet.com>
- Prog 101
  - From: "Todorovic" <todorovic@home.com>

Prev by Date: Prog 101
Next by Date: Re: LT5 Info.., and 1228331 stuff in general.
Previous by thread: Prog 101
Next by thread: Re: Prog 101
Index(es):
- Date
- Thread