RE: Injector Duty Cycle

["J. T. Spilman" <jtstexas@home.com>]

I'm interested in the injector duty cycle calculator if you would be kind
enough, to let me have a copy.
Thanks
jt

> -----Original Message-----
> From: owner-gmecm@diy-efi.org [mailto:owner-gmecm@diy-efi.org]On Behalf
> Of trax
> Sent: Thursday, June 01, 2000 4:03 PM
> To: gmecm@diy-efi.org
> Subject: RE: Injector Duty Cycle
>
>
> Got it figured out via Diacom.  If the pulse width is 10ms at
> 6000RPMs then
> you are at 100% Duty Cycle (thanx Adris!).  Using this info I made a quick
> and dirty VB program that will calculate Duty Cycle based on RPMs
> and Pulse
> Width values.  If anybody is interested then let me know.
>
> Tim
>
> >-----Original Message-----
> >From: owner-gmecm@diy-efi.org [mailto:owner-gmecm@diy-efi.org]On Behalf
> >Of trax
> >Sent: Thursday, June 01, 2000 1:59 PM
> >To: Gmecm@Diy-Efi. Org
> >Subject: Injector Duty Cycle
> >
> >
> >I've heard that you can use a MultiMeter to measure the Injector
> >Duty Cycle.
> >Can someone explain how to do this ... i.e. what settings on the
> MultiMeter
> >and where to stick the probes.
> >
> >Tim
> >
> >-------------------------------------------------------------------
> >---------
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo@lists.diy-efi.org
> >
> >
>
> ------------------------------------------------------------------
> ----------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org