Re: Help!

[rr <RRauscher@nni.com>]

Looks like as good as any to start with. The '747 code includes
A/C support. Check locations 5D0, 5D1 for min/max IAC steps
w A/C. 5DA for A/C on diff engine RPM. And 5E3 for RPM
add-on for A/C on.

All the '747 needs is to see the line on pin B8 go high when the
A/C compressor is on.

BobR.


Ernst denBroeder wrote:

> Okay... just ordered a '7747 from a local bone yard to replace the '7429
> that I have here. (free delivery too!)
>
> I need help picking a starting point calibration.  My motor is a 2.8tbi
> with a 5spd, 3.42, A/C.  So I guess the best starting point would be a
> 4.3v6 bin.
>
> APAB is listed as a 4.3v6, 5spd, 3.42:1 bin, but there is no mention of
> A/C... would anyone know if this bin has A/C support?
>
> Am I chasing up the right tree here with this bin?
>
> Thanks,
> Ernst
>
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org