Re: 7747 tuning again

["Walter Sherwin" <wsherwin@home.com>]

Neat!  I look forward to test driving it.  Are you collecting data under the
guise of Mode 1, or Message Scheduler [broadcast] mode, or even something
else?  Good luck with your project.

Walt.




>
> You underestimate your audience!.
> I've caught the little guys reading you work, by flashlight under the
> covers. after lights out.
> Bruce
>
>
>
> > Hi Walt, I was starting to wonder if anyone was reading my posts <g>.
> > Here's an introduction that I've put together. . .
> > BobR.
> > GM ECM Data Collection System, Lockers
> > Robert Rauscher, 4/9/00
> > General:
> >
> >     The Lockers system described in this article is for use on the
> >     '747 ECM. It will work on some other ECMs without changes. Other
> >     ECMs will require minor changes in the Lockers system.
> >
> >     The purpose of the ECM Lockers system is to collect ECM data and
> >     vehicle data during the live operation of a fuel injected
> >     automobile engine. This data is then evaluated 'after the fact'.
> >     An evaluation program is used to analyze and display ECM
> >     information directly related to the performance and tuning of
> >     the engine and drivetrain.
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org