[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: testing O2 sensor
Haw haw haw haw <grin> sucks that all perf parts are made in usa! Just
think, if eldebrock and tpis were canadian companies... you could pick up a
vic jr or long tube runners for the price of pez candies!
Mike Rolica
Plant A,
Magnesium Products Division
Strathroy
(519)-245-4040 Ext. 265
-----Original Message-----
From: Bruce Plecan [SMTP:nacelp@bright.net]
Sent: Friday, June 23, 2000 3:39 AM
To: gmecm@diy-efi.org
Subject: Re: testing O2 sensor
Hmmm, currency conversion is off that should be $1.75US as of
yesterday, but
they still average about 400, round here
Grumpy
> Huluvalot cheaper than my $700 fluke meter :-)
> Mike Rolica
> Plant A,
> Magnesium Products Division
> Strathroy
>
> (519)-245-4040 Ext. 265
>
>
> -----Original Message-----
> From: Bruce Plecan [SMTP:nacelp@bright.net]
> Sent: Friday, June 23, 2000 3:04 AM
> To: gmecm@diy-efi.org
> Subject: Re: testing O2 sensor
>
> Some meters have such a slow sampling rate that the average looks
> like no O2
> counts. Then if trying A/C they can do the RMS (?) thing and
again
> look
> wrong. Know your meter, be one with meter, good Karma. Really
best
> to use
> scanner, and see O2 Counts or at least a handheld scope (MCM had
> them for
> $199). They have and even better one now that's dual trace for
> $299,
> FWIW...
> Grumpy
>
>
>
> > using either a digital VOM set to 2 voltsDC or a scan tool -
check
> the
> > voltage coming off the sensor to grpund. Normal is .5volts.
rich
> is
> .9volts
> > lean is .1 volts or less. It will probably swing back and forth
> so fast
> you
> > cant get a good reading.
> >
> > Thanks for listening to my electroyappin!
> > Ryan Hampl - a K-State Grad! kasaryan@aol.com
> > 139 Hoover Ct. Controls Engineer (tubes rule!)
> > Salina, KS 67401 97 B12 / 86 V65 / 93chevy truck
> EFI 383
> > phone (785) 825 5831 I'M ALWAYS FIRST TO THE GROCERY
> STORE!
> >
>
--------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> > in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
> >
>
>
>
--------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
>
--------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
>
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org