Re: BIG WinBin vs TunerCat discrepencies

["Swayze" <kswayze@bellsouth.net>]

Lyndon,
from what I can tell, you do a lot of 'tuning', what do you use to modify
the .bin's?
byE
Mike
Swayze
mswayze@truswood.com
kswayze@bellsouth.net
----- Original Message -----
From: "Programmer" <nwester@eidnet.org>
To: <gmecm@diy-efi.org>
Sent: Thursday, June 15, 2000 10:10 AM
Subject: Re: BIG WinBin vs TunerCat discrepencies


> The *.ecu files are the problem...you'll have to rework your
> own to correct them. I don't think anyone has posted a correct
> 730 ECU for WinBin as yet--close, but not correct. The info for the ECU's
> have been taken from dissembled info--which must be incorrect ??
> Lyndon.
> -----Original Message-----
> From: trax <trax@frederickmd.com>
> To: Gmecm@Diy-Efi. Org <gmecm@diy-efi.org>
> Cc: Nick Dedio <nickd_92@hotmail.com>
> Date: June 14, 2000 3:28 PM
> Subject: BIG WinBin vs TunerCat discrepencies
>
>
> >FELP!  FELP!
> >
> >I thought that these discrepencies were just limited to what I initially
> >mentioned; namely, ...
> >
> >Coolant fan temps
> >Injector flow rate
> >Feul cutoff and return (RPM)
> >Cold, Warm, and Hot closed loop timers
> >
> >But, there are much bigger fish in these waters :-(
> >
> >The VE tables (both) contain the same values ... BUT IN THE WRONG
CELLS!!!!
> >Has anyone seen this before?  It looks like the tables are turned
sideways.
> >The values in the 20kpa column for rpms 1600-4800 inside TunerCat are the
> >values in WinBin for 1600rpms for 20-100kpa!!!!  What the?  Furthermore,
> >TunerCat has this table populated to 5600rpms and WinBin only goes to
> >4800rpms.
> >
> >This discrepency is also true with the spark tables ... but, to a much
> >bigger degree.  The tables don't even contain the same values :-(
> >
> >Does ANYONE know what is up with this?  FELP!
> >
> >Tim
> >
>
>---------------------------------------------------------------------------
> -
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo@lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org