Re: HEX TO DECIMAL

[Ludis Langens <ludis@cruzers.com>]

Daniel Collins wrote:
> 
> I have done spark table (what does the ecu use for a spark calculation above
> 4800 rpm or does it have fixed spark from then on) and am now starting on ve
> table,bpc ,idle a/f /rpm/spark tables.

Usually, the advance will be the 4800 rpm (or whatever limit the table
has) table value plus rpm times a constant.  This "adder" term will pin
the rpm value to a limit.  Beyond that limit, the timing will be fixed.

-- 
Ludis Langens                               ludis (at) cruzers (dot) com
Mac, Fiero, & engine controller goodies:  http://www.cruzers.com/~ludis/
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org