Re: Mysterious rogue connector

[Shannen Durphey <shannen@grolen.com>]

What color is the connector?
Shannen

Marteney, Steven J. wrote:
> 
> I've dropped the 350 TPI back in my 89 Firebird after a full rebuild.  I'm
> now hooking the harness back up and have encountered a rogue two-pin
> connector that breaks out of the harness at the top of the bell-housing.
> The IAT (or MAT) sensor has an extension plug on it.  This renegade
> connector mates perfectly to the connector the MAT sensor extension plugs
> into.  Is this some kind of diagnostic connector to take the MAT out of the
> loop?
> 
> The connector is about 1.5 inches long and has two plastic "barrels" with
> pins in them.  One barrel is slotted.  I think the wires are basically red
> and black, but I didn't see anything like that on the wiring diagram.  The
> VSS and lock-up connectors ARE connected to the transmission.  I know where
> every wire goes except this one, and I DO NOT remember unplugging it.
> Please help.
> 
> Steve Marteney
> smarteney@xlvision.com
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org