Re: J N's MiniRam backfire

["JN" <jwn@sgi.net>]

Tim,

    Yes I am using the $6E code.  I had it backwards.  I just read what the
codes were on the Thirdgen site yesterday.

Thanks again,
Jason
----- Original Message -----
From: <timsiford@hushmail.com>
To: <gmecm@diy-efi.org>
Sent: Thursday, November 09, 2000 2:33 PM
Subject: Re: J N's MiniRam backfire


> > As far as which
> >code I'm using i don't any attention to that.  Is $32B not the 89 code?
> > Is this the 88 code?
>
> Stock from GM:
> 1989 TPI F-Body = 165ECM running $6E code
> 1988 TPI F-Body = 165ECM running $32B code
>
> ONE of the biggest differences between these codesets (notice use of the
> word ONE) is that the $6E code does not control the cold start injector.
>  Rather, additional fuel is added for cold starts through the stock 8
injectors.
>  If you are running a MiniRam then you should definitely be using the $6E
> code because the MiniRam has ZERO provisions for the cold start injector.
>
> Tim
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org