[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Bigger injectors didnt fix it / injector sizing
The stock chip cuts out at basically 4500, I had the same problem before as
well. I do not know weather it cuts back on fuel, or retards timing, but it
does something. On a stock TBI motor you are out of breating capability and
horsepower by 4K anyway, so, I guess they just made the Proms like that.
Is a half-pound of hydrocarbon per horsepower hour still the recommended
yardstick for injector sizing? This means 2 65lb\hr injectors will support
260 HP.
Thanks for listening to my electroyappin!
Ryan Hampl - a K-State Grad! kasaryan@aol.com
139 Hoover Ct. Controls Engineer (tubes rule!)
Salina, KS 67401 97 B12 / 86 V65 / 93chevy truck EFI 383
phone (785) 825 5831 I'M ALWAYS FIRST TO THE GROCERY STORE!
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org