Re: Editing proms (editorial)

["Kevin R" <KEReyn@gte.net>]

Keep in mind that the AFR settings and such aren't real numbers. It would be
nice if they are close, but the ECM uses calculations based on what it's
told are the current injector size/ motor size etc. Since there is more to
accurately gauging AFR than these variables, (and this assumes the prom IS
set for YOUR injector and engine size) the WOT AFR setting much like the VE
table numbers shouldn't be thought of in terms of actual AFR or VE.

Kevin R

I don't think that the problem rests with the
> WOT region, although AFR for WOT is currently set at 12.5.

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org