RE: tpi intakes

["Timothy Siford" <timsiford@frederickmd.com>]

>TPS has the mini ram,
>but some guys have had to do lots of work to install them.

FYI - The results of my MiniRam install can be found at:

http://www.umount.com/thirdgen/techboard/Forum1/HTML/023732.html

Talk about power in the upper RPMS!!!

>What I think **MIGHT** work is down by the head side of the intake manifold
>grind a 1" hole 3"s up them the end of the runner, For the
>siamesed runners.

Views of my AS&M Semi-S LTRs and how I modified the plenum can be found at:

http://fbody.com/wayne/tpi/

Notice that the roof of the runners and plenum had been raised.  I could
have raised it further but I didn't feel like messing with it.  I went with
the TPIS MiniRam.

Tim

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org