Re: 165 ECU File

[timsiford@hushmail.com]

Please note that there is already a .ECU file for the '89 $6E code (165ECM) 
in the incoming directory.  
What is NOT in the incoming directory is an ECU file for the $32 and $32B 
code for '86-'88 165ECMs.

Tim

At Sun, 29 Oct 2000 07:49:14 -0600, "Dan Townsend" <xybertron@cox-internet.com> 
wrote:

>
>Wow I didn't figure this many people would want it.  With the added 
>interest
>I am taking the time to verify it and add anything that might be missing.
>Should be done later today and then I will post it.  I'll keep everyone
>informed on my progress.  As of now I have verified 3 Map's plus fan 
>turn
>on/off and 10 Arrays plus the MAF arrays.  Now I need to see if I am 
>missing
>any Arrays and Maps and then double check the Value section.  I don't 
>have
>any of the flags ;-(
>
>BTW - This 165 is based off a 89 bin.  This will allow you to unhook 
>the
>cold start valve and block it off if you want.  I still need to find 
>out how
>to disable VATS with this ecu.
>
>If anyone wants to help that has an aftermarket proggie and can modify 
>a bin
>and return it to me then please e-mail me so I can figure out the locations
>of the flags like VATS.  Thanks.
>
>Dan
>
>----- Original Message -----
>From: "Programmer" <nwester@eidnet.org>
>To: <gmecm@diy-efi.org>
>Sent: Sunday, October 29, 2000 12:53 AM
>Subject: Re: 165 ECU File
>
>
>> Cool--wouldn't mind a copy.
>> Lyndon
>> -----Original Message-----
>> From: Dan Townsend <xybertron@cox-internet.com>
>> To: gmecm@diy-efi.org <gmecm@diy-efi.org>
>> Date: October 28, 2000 11:22 AM
>> Subject: Re: 165 ECU File
>>
>>
>> >I have been working on the 165 ecu and am stopping since I am going 
>to
>the
>> >730 setup.  If you want my ecu file just lemme know.  For the checksum
>just
>> >do all your work on the chip and then open the bin with GMEpro demo 
>and
>it
>> >will tell you what the checksum should be.
>> >
>> >Dan
>
>--------------------------------------------------------------------
>--------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>