Re: Greetings from a "new" member

["Jeff M" <tystorm@email.msn.com>]

Glad to see the Dig back in action here in virtual living land.  I remember
you at the SyTy list/Sight from at least its beginning, I know in time the
list will be very happy as they find we have added another very
knowledgeable and helpful engine/ECM tuner.  I know you will find this list
great fun and very helpful with its members and their vast knowledge, there
are some great guys here and a good camaraderie between all (and lots of
kidding as well ;-).  As you note, we have many into L98/LT1/LS1 and
modified variations of those, as well other V8s and a few V6s and Quad 4s.
One thing to note here is that there is a diversity of single project
members to those putting together something to share with others here and/or
elsewhere and some putting together items to sell here and/or elsewhere and
a few who are employed by companies that do this sort of activity for their
employer.  I would be interested in the details of your scan tool for the
TGP when you get time, price as well since I feel it only fair for your
efforts.  If there is anything I can help on the TGP (still have one, new 39
lbs/min turbo getting ordered, 30 lbs/hr injector chip ready) let me know (I
currently run a Diacom-Plus, a dual port ram emulator system/AME front end,
remote display knock sensor and wideband o2).

Jeff Middaugh



> This is my first post to this list, so I wanted to
> take a little time to do an intro.
>
> I recognized a lot of names while rooting through the
> archives... some folks that I hadn't seen/heard from
> since the days of the HotRod list 8-9 years ago. It's
> good to see the same old voices (does that make sense?)
> are still out there plugging away.
>
> Anyway, enough  of old-home-week. I've been working on
> GM ECMs (specifically the '749/$58 code) for about 6
> years now. My current project, (along with continual
> tweaking of the $58 code to make the boost control work
> decently) is a scan-tool product for the Syty/TGP/Sunbird
> that I call the F.I.S.T (Forced Induction Scan Tool).
> It's a VB app using only the common MS controls, and it
> currently communicates quite well.
>
> When I'm not doing that (and the weather permits), I'm
> trying to coax my '91 Syclone:
>
> http://www.syty.org/member_mods.html#letter_b
>
> ...ever closer to the 11's. It's run a traction-limited
> 12.53@105, with much work yet to do on the new boost routine
> and getting the TCC to lock where I want it too.
>
> I'll spare all the dumb questions until I've had a chance
> to read through the archives and catch up. Which looks like
> it'll take a while...
>
> Later,
> Dig
> turbodig@usa.net
> (formerly sbarthol@cca.rockwell.com, among others)
> '91 Sy - 12.53 @105/7.98 @88
>
> ____________________________________________________________________
> Get free email and a permanent address at http://www.netaddress.com/?N=1
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>



----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org