Re: TPI 5.7L and SVO injectors

[WEG1192@aol.com]

Cam is mild at 223@0.050 and 0.45 lift. I am not running a 305 though. I'm 
running a 350 bored 0.030 over and I did not change the injector constant to 
reflect the use of 19 lb injectors. I'm sure that's why my BLMs are so high. 
Its a temporary solution. I've sold my TPI to replace with a custom built 
port using an Edelbrock open plenum as a starting point. TPI setups are way 
too fragile in my opinion.

JW
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org