Re: LT-1 Heads

[Shannen Durphey <shannen@grolen.com>]

Not without serious work.  They have no coolant passages, so that will
have to be accounted for.  The bolts are in a different location, and
the area which must be machined for the distributor hole is very thin,
so you may end up reinforcing it to hold the dizzy.
BTDT.
Shannen

WEG1192@aol.com wrote:
> 
> Ok, last question about the LT-1. Even though the heads are reverse flow,
> will the LT-1 port injection manifold fit the "old" style Gen-1 heads with
> the canted intake center bolts? Are the ports moved around?
> 
> Thanks,
> 
> John Wilson
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org