[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Gummy Chryslers
thanks Mike.
I've also heard acetone works great and doesn't
remove labelling.
Lyndon.
-----Original Message-----
From: Swayze <kswayze@bellsouth.net>
To: gmecm@efi332.eng.ohio-state.edu <gmecm@efi332.eng.ohio-state.edu>
Date: January 17, 2000 1:49 PM
Subject: Re: Gummy Chryslers
>Sorry it wasn't MEK in the spray can it
>was (1,1,1) trichloroethane(sp.)
>MEK is not supposed to be as bad.
>recommendations from a friend in order
>to try:
>
>
>lighter fluid
>rubber cement thinner
>MEK/acetone
>
>he also recommended a hi-tack tape as an
>alternative.
>
>after that you're on your own.
>byE
>Mike S.
>
>Swayze wrote:
>>
>> Don't know if they still carry it or not
>> but PepBoys used to carry a spray on
>> paint stripper that had MEK in it. (says
>> carcinogen on the can) (about $8)
>> byE
>> Mike S.
>>
>> Programmer wrote:
>> >
>> > That's it !! -- Thanks--couldn't remember the long name.
>> >
>> > LW
>> > -----Original Message-----
>> > From: Shannen Durphey <shannen@grolen.com>
>> > To: gmecm@efi332.eng.ohio-state.edu <gmecm@efi332.eng.ohio-state.edu>
>> > Date: January 15, 2000 8:03 PM
>> > Subject: Re: Gummy Chryslers
>> >
>> > >Methyl Ethyl Keytone?
>> > >Shannen
>> > >
- Follow-Ups:
- '730 ecu
- From: Swayze <kswayze@bellsouth.net>