[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 730 .ecu file

To: gmecm@efi332.eng.ohio-state.edu
Subject: Re: 730 .ecu file
From: "Robert W. Hughes" <rwhughe@ev1.net>
Date: Sun, 16 Jan 2000 22:48:30 -0600
Organization: DeathStar Dumpsters
References: <200001170143.RAA22567@hektor.valesh.com>
Reply-to: gmecm@efi332.eng.ohio-state.edu
Sender: owner-gmecm@esl.eng.ohio-state.edu

> Does anyone have an .ecu file for a '730 ECM I am considering changing
> ecm's when I install my turbo, and would like it to be a fairly well
> known ecm, rather than the 7170. BTW the 730 is a MPFI ecm correct?

Before you get too wound up on replacing the 7170, realize that it does
support a 2bar MAP, although no waste gate or knock sensor.
-- 
Robert W. Hughes (Bob)
BackYard Engineering
29:40.237N, 95:28.726W
Houston, Texas
rwhughe@ev1.net

Follow-Ups:
- Re: 730 .ecu file
  - From: "TK" <terryk@foothill.net>

Prev by Date: Re: Fw: 747 programing
Next by Date: CarBytes V2 now on GM-ECM ftp site
Previous by thread: Re: 730 .ecu file
Next by thread: Re: 730 .ecu file
Index(es):
- Date
- Thread