Re: Injector Duty cycle calculations

[Scott Knight <scott@scottknight.com>]

To revisit a very old topic here, I did a little experimenting with
Diacom recently and did in fact verify what I mentioned as second hand
info here...

> Am I missing something here?  Is Diacom reporting wrongly?

Actually it is.  I did a steady state run while out on the Ohio turnpike
with the 95 Impala SS (can't vouch for any other PCM/ECM readings) and
Diacom version 2.85 where it was very flat and the cruise control was
set at 75 mph.  What I found was very interesting in that Diacom truly
does report the pulse width at half of what the other scanners I have do
(PCMcomm from Dave H. and TTS DataMaster).  Just though you would like
to know since it seemed to be news to everyone but me at the time. 
Anyone else notice this with other vehicles or is it something specific
to the way Diacom scales the info out of the 8051 and newer PCMs? (yeah,
I realize that Diacom reads the OBD-II PCM in 'legacy' mode)

Later dates.
-- 
Scott Knight  mailto:scott@scottknight.com
http://www.scottknight.com/ IRC:SS396man
'00 White Grand Prix GTP
'95 Black Impala SS
'94 Ducati 900SS CR

----- End of forwarded message from owner-gmecm@diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org