Re: 88 quad-4

[Shannen Durphey <shannen@grolen.com>]

Well, wait just a minute.  90-91 vette is MAP tpi, then 92-93 vette is
LT1.
Are you using this on a distributor engine?  Use the sy/ty
calibration.  Otherwise you have some major ignition dwell/timing
issues to overcome.  
Shannen

cwagner@info2000.net wrote:
> 
> On 24 Jan 00, at 20:22, ECMnut@aol.com wrote:
> 
> > In a message dated 1/24/00 5:36:19 PM Eastern Standard Time,
> > cwagner@info2000.net writes:
> >
> > > Has anyone done anything with the code for an 88 Grand Am with
> > >  the 2.3l quad-4 engine?
> > I found the spark table once, cuz I was board and the chip was in an ecm I
> > fished
> > out of the local yard.  It was BIG.  Compared to the turbo-sunbird anyway.
> > MV
> 
> Any help would be great.  If i can get things figured out, I might use
> this instead of a 730 with the 90-92 corvette/camaro code.
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org