[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

7747 AC connection.

To: <gmecm@efi332.eng.ohio-state.edu>
Subject: 7747 AC connection.
From: "Kevin Reynolds" <kereyn@gte.net>
Date: Thu, 13 Jan 2000 23:38:53 -0500
Reply-to: gmecm@efi332.eng.ohio-state.edu
Sender: owner-gmecm@esl.eng.ohio-state.edu

Does the 7747 have a AC shut off under load or full throttle conditions?

Is pin B8, which is listed as AC signal, a signal for the above shut off to the Compressor, or is it a signal to the ECM that the AC is on to compensate for the additional load?

Kevin R

Prev by Date: Re: Hi and just joined this group
Next by Date: Introduction
Previous by thread: Re: Hi and just joined this group
Next by thread: Introduction
Index(es):
- Date
- Thread