Re: sbc in place of lt1

[Len Sabatine <sabatine@epix.net>]

   94-5 16188051 PCM needs Optispark to function and if you have A4 trans
you need the PCM to  operate it. Would be less costly to Rebuild/ upgrade
the Lt1. Have fun getting at a distributor under the Cowl of a 4th Gen
F body for one of the first treats and get a different engine controller and
wire harness to run the 406.  This is [CHEAP] ????? not to mention the
many other compatibility problems with the Vehicle. If you have a bone
yard Skelliton for a off road deal , then no matter.
Len

> Does anyone know how hard (electronically) it would be to substitute a
> standard (406-cheaper) sbc with a mini-ram in place of a (needs rebuilding)
> lt1;  it seems that the optispark interface with the computer would be the
> problem but otherwise lt1.edit would allow use of the stock (1995 9C1)
> computer.  Thanks for any thoughts.  skip
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org