[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Transez. was:New bin...
GM changed the designations to try and remove confusion.
125, 125c (With clutch converter)
Now called 3T40
First designation is always the number of speeds in the trans.
Second designation is
T = Transverse mounted
L = Longitudinally mounted
Third = relative torque capacity in Newton-Meters
Fourth (If applicable) is E for Electronically shifted.
So Old designation New designation
125 and 125c 3T40
44T4 4T60 and 4T60E
700R4 4L60 and 4L60E
TH400 4L80 and 4L80E
There are a ton more too!
Mark
----- Original Message -----
From: "TK" <terryk@foothill.net>
To: <gmecm@diy-efi.org>
Sent: Thursday, November 23, 2000 9:29 AM
Subject: Re: Transez. was:New bin...
> No, the 440 is the 4 spd, 125 is the 3 spd. The 440 and 4T60 are pretty
much
> the same. The 4T60E is the electronic version. I didn't think the 4T60E
was
> used as early as 92 on the 3.1L. Only certain 3800's and 3.4L DOHC.
>
> At least I've never seen one on the motor that early.
>
> Terry
> .
>
> ----- Original Message -----
> From: Dave Zug <dzug@delanet.com>
> To: <gmecm@diy-efi.org>
> Sent: Thursday, November 23, 2000 12:23 PM
> Subject: Re: Transez. was:New bin...
>
>
> >
> > Thats what I meant to say. 4T60E.
> >
> > Isn't the THM-125C aka 440-T4?
> >
> > the 5 speed Fiero tranny is called what?
> >
> > Anyone heard of a '383 Getrag' manual FWD trans and know the AKA?
> >
> >
> >
> > ----- Original Message -----
> > From: Programmer <nwester@eidnet.org>
> > To: <gmecm@diy-efi.org>
> > Sent: Thursday, November 23, 2000 11:42 PM
> > Subject: Re: New bin on incoming
> >
> >
> > > Maybe a 4T60E ??
> > >
> > > Lyndon.
> > > ----- Original Message -----
> > > From: "Dave Zug" <dzug@delanet.com>
> > > To: <gmecm@diy-efi.org>
> > > Sent: Thursday, November 23, 2000 12:07 PM
> > > Subject: Re: New bin on incoming
> > >
> > >
> > > > A guess: 4L60E
> > > >
> > > > ----- Original Message -----
> > > > From: D. Barry Stubbs <z24man@earthlink.net>
> > > > To: <gmecm@diy-efi.org>
> > > > Sent: Thursday, November 23, 2000 6:43 AM
> > > > Subject: Re: New bin on incoming
> > > >
> > > >
> > > > > Ross Myers wrote:
> > > > > >
> > > > > > >From a 92 3.1V6 GP.
> > > > > >
> > > > > > ASHH5658.bin
> > > > > >
> > > > > > Bye,
> > > > > > Ross Myers
> > > > >
> > > > > Transmission? Thanks.
> > > > >
> > > > >
> > ========================================================================
> > > > > D. Barry Stubbs
> > http://surf.to/z24man
> > > > > (478) 745-9429 AOL IM:
thez24man
> > > > > z24man@earthlink.net BNet Member #828 ICQ #5409648
> > > > > #101STS MidGa Region SoloII 94 Q4 5spd Aqua Z26 88 2.8 5Spd
White
> > Z24
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > > > --
> > > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> > quotes)
> > > > > in the body of a message (not the subject) to
> > > majordomo@lists.diy-efi.org
> > > > >
> > > > >
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > > --
> > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> > > > in the body of a message (not the subject) to
> > majordomo@lists.diy-efi.org
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
> > >
> > >
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org